usb: phy: change phy notify connect/disconnect API
The old parameter "port" is useless for phy notify, as one usb
phy is only for one usb port. New parameter "speed" stands for
the device's speed which is on the port, this "speed" parameter
is needed at some platforms which will do some phy operations
according to device's speed.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Tested-by: Mike Thompson <mpthompson@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c
index 5b09f33..9a3caee 100644
--- a/drivers/usb/otg/mxs-phy.c
+++ b/drivers/usb/otg/mxs-phy.c
@@ -76,22 +76,28 @@
clk_disable_unprepare(mxs_phy->clk);
}
-static int mxs_phy_on_connect(struct usb_phy *phy, int port)
+static int mxs_phy_on_connect(struct usb_phy *phy,
+ enum usb_device_speed speed)
{
- dev_dbg(phy->dev, "Connect on port %d\n", port);
+ dev_dbg(phy->dev, "%s speed device has connected\n",
+ (speed == USB_SPEED_HIGH) ? "high" : "non-high");
- writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
- phy->io_priv + HW_USBPHY_CTRL_SET);
+ if (speed == USB_SPEED_HIGH)
+ writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ phy->io_priv + HW_USBPHY_CTRL_SET);
return 0;
}
-static int mxs_phy_on_disconnect(struct usb_phy *phy, int port)
+static int mxs_phy_on_disconnect(struct usb_phy *phy,
+ enum usb_device_speed speed)
{
- dev_dbg(phy->dev, "Disconnect on port %d\n", port);
+ dev_dbg(phy->dev, "%s speed device has disconnected\n",
+ (speed == USB_SPEED_HIGH) ? "high" : "non-high");
- writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
- phy->io_priv + HW_USBPHY_CTRL_CLR);
+ if (speed == USB_SPEED_HIGH)
+ writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ phy->io_priv + HW_USBPHY_CTRL_CLR);
return 0;
}