/*
 *	i6300esb:	Watchdog timer driver for Intel 6300ESB chipset
 *
 *	(c) Copyright 2004 Google Inc.
 *	(c) Copyright 2005 David Härdeman <david@2gen.com>
 *
 *	This program is free software; you can redistribute it and/or
 *	modify it under the terms of the GNU General Public License
 *	as published by the Free Software Foundation; either version
 *	2 of the License, or (at your option) any later version.
 *
 *	based on i810-tco.c which is in turn based on softdog.c
 *
 *	The timer is implemented in the following I/O controller hubs:
 *	(See the intel documentation on http://developer.intel.com.)
 *	6300ESB chip : document number 300641-004
 *
 *  2004YYZZ Ross Biro
 *	Initial version 0.01
 *  2004YYZZ Ross Biro
 *	Version 0.02
 *  20050210 David Härdeman <david@2gen.com>
 *	Ported driver to kernel 2.6
 */

/*
 *      Includes, defines, variables, module parameters, ...
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/uaccess.h>
#include <linux/io.h>

/* Module and version information */
#define ESB_VERSION "0.04"
#define ESB_MODULE_NAME "i6300ESB timer"
#define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION
#define PFX ESB_MODULE_NAME ": "

/* PCI configuration registers */
#define ESB_CONFIG_REG  0x60            /* Config register                   */
#define ESB_LOCK_REG    0x68            /* WDT lock register                 */

/* Memory mapped registers */
#define ESB_TIMER1_REG  BASEADDR + 0x00 /* Timer1 value after each reset     */
#define ESB_TIMER2_REG  BASEADDR + 0x04 /* Timer2 value after each reset     */
#define ESB_GINTSR_REG  BASEADDR + 0x08 /* General Interrupt Status Register */
#define ESB_RELOAD_REG  BASEADDR + 0x0c /* Reload register                   */

/* Lock register bits */
#define ESB_WDT_FUNC    (0x01 << 2)   /* Watchdog functionality            */
#define ESB_WDT_ENABLE  (0x01 << 1)   /* Enable WDT                        */
#define ESB_WDT_LOCK    (0x01 << 0)   /* Lock (nowayout)                   */

/* Config register bits */
#define ESB_WDT_REBOOT  (0x01 << 5)   /* Enable reboot on timeout          */
#define ESB_WDT_FREQ    (0x01 << 2)   /* Decrement frequency               */
#define ESB_WDT_INTTYPE (0x11 << 0)   /* Interrupt type on timer1 timeout  */

/* Reload register bits */
#define ESB_WDT_RELOAD  (0x01 << 8)    /* prevent timeout                   */

/* Magic constants */
#define ESB_UNLOCK1     0x80            /* Step 1 to unlock reset registers  */
#define ESB_UNLOCK2     0x86            /* Step 2 to unlock reset registers  */

/* internal variables */
static void __iomem *BASEADDR;
static DEFINE_SPINLOCK(esb_lock); /* Guards the hardware */
static unsigned long timer_alive;
static struct pci_dev *esb_pci;
static unsigned short triggered; /* The status of the watchdog upon boot */
static char esb_expect_close;
static struct platform_device *esb_platform_device;

/* module parameters */
/* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
#define WATCHDOG_HEARTBEAT 30
static int heartbeat = WATCHDOG_HEARTBEAT;  /* in seconds */

module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat,
		"Watchdog heartbeat in seconds. (1<heartbeat<2046, default="
				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");

static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout,
		"Watchdog cannot be stopped once started (default="
				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");

/*
 * Some i6300ESB specific functions
 */

/*
 * Prepare for reloading the timer by unlocking the proper registers.
 * This is performed by first writing 0x80 followed by 0x86 to the
 * reload register. After this the appropriate registers can be written
 * to once before they need to be unlocked again.
 */
static inline void esb_unlock_registers(void)
{
	writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
	writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
}

static int esb_timer_start(void)
{
	u8 val;

	spin_lock(&esb_lock);
	esb_unlock_registers();
	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
	/* Enable or Enable + Lock? */
	val = 0x02 | (nowayout ? 0x01 : 0x00);
	pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
	spin_unlock(&esb_lock);
	return 0;
}

static int esb_timer_stop(void)
{
	u8 val;

	spin_lock(&esb_lock);
	/* First, reset timers as suggested by the docs */
	esb_unlock_registers();
	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
	/* Then disable the WDT */
	pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x0);
	pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val);
	spin_unlock(&esb_lock);

	/* Returns 0 if the timer was disabled, non-zero otherwise */
	return (val & 0x01);
}

static void esb_timer_keepalive(void)
{
	spin_lock(&esb_lock);
	esb_unlock_registers();
	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
	/* FIXME: Do we need to flush anything here? */
	spin_unlock(&esb_lock);
}

static int esb_timer_set_heartbeat(int time)
{
	u32 val;

	if (time < 0x1 || time > (2 * 0x03ff))
		return -EINVAL;

	spin_lock(&esb_lock);

	/* We shift by 9, so if we are passed a value of 1 sec,
	 * val will be 1 << 9 = 512, then write that to two
	 * timers => 2 * 512 = 1024 (which is decremented at 1KHz)
	 */
	val = time << 9;

	/* Write timer 1 */
	esb_unlock_registers();
	writel(val, ESB_TIMER1_REG);

	/* Write timer 2 */
	esb_unlock_registers();
	writel(val, ESB_TIMER2_REG);

	/* Reload */
	esb_unlock_registers();
	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);

	/* FIXME: Do we need to flush everything out? */

	/* Done */
	heartbeat = time;
	spin_unlock(&esb_lock);
	return 0;
}

static int esb_timer_read(void)
{
	u32 count;

	/* This isn't documented, and doesn't take into
	 * acount which stage is running, but it looks
	 * like a 20 bit count down, so we might as well report it.
	 */
	pci_read_config_dword(esb_pci, 0x64, &count);
	return (int)count;
}

/*
 *	/dev/watchdog handling
 */

static int esb_open(struct inode *inode, struct file *file)
{
	/* /dev/watchdog can only be opened once */
	if (test_and_set_bit(0, &timer_alive))
		return -EBUSY;

	/* Reload and activate timer */
	esb_timer_start();

	return nonseekable_open(inode, file);
}

static int esb_release(struct inode *inode, struct file *file)
{
	/* Shut off the timer. */
	if (esb_expect_close == 42)
		esb_timer_stop();
	else {
		printk(KERN_CRIT PFX
				"Unexpected close, not stopping watchdog!\n");
		esb_timer_keepalive();
	}
	clear_bit(0, &timer_alive);
	esb_expect_close = 0;
	return 0;
}

static ssize_t esb_write(struct file *file, const char __user *data,
			  size_t len, loff_t *ppos)
{
	/* See if we got the magic character 'V' and reload the timer */
	if (len) {
		if (!nowayout) {
			size_t i;

			/* note: just in case someone wrote the magic character
			 * five months ago... */
			esb_expect_close = 0;

			/* scan to see whether or not we got the
			 * magic character */
			for (i = 0; i != len; i++) {
				char c;
				if (get_user(c, data + i))
					return -EFAULT;
				if (c == 'V')
					esb_expect_close = 42;
			}
		}

		/* someone wrote to us, we should reload the timer */
		esb_timer_keepalive();
	}
	return len;
}

static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
	int new_options, retval = -EINVAL;
	int new_heartbeat;
	void __user *argp = (void __user *)arg;
	int __user *p = argp;
	static struct watchdog_info ident = {
		.options =		WDIOF_SETTIMEOUT |
					WDIOF_KEEPALIVEPING |
					WDIOF_MAGICCLOSE,
		.firmware_version =	0,
		.identity =		ESB_MODULE_NAME,
	};

	switch (cmd) {
	case WDIOC_GETSUPPORT:
		return copy_to_user(argp, &ident,
					sizeof(ident)) ? -EFAULT : 0;

	case WDIOC_GETSTATUS:
		return put_user(esb_timer_read(), p);

	case WDIOC_GETBOOTSTATUS:
		return put_user(triggered, p);

	case WDIOC_SETOPTIONS:
	{
		if (get_user(new_options, p))
			return -EFAULT;

		if (new_options & WDIOS_DISABLECARD) {
			esb_timer_stop();
			retval = 0;
		}

		if (new_options & WDIOS_ENABLECARD) {
			esb_timer_start();
			retval = 0;
		}
		return retval;
	}
	case WDIOC_KEEPALIVE:
		esb_timer_keepalive();
		return 0;

	case WDIOC_SETTIMEOUT:
	{
		if (get_user(new_heartbeat, p))
			return -EFAULT;
		if (esb_timer_set_heartbeat(new_heartbeat))
			return -EINVAL;
		esb_timer_keepalive();
		/* Fall */
	}
	case WDIOC_GETTIMEOUT:
		return put_user(heartbeat, p);
	default:
		return -ENOTTY;
	}
}

/*
 *      Kernel Interfaces
 */

static const struct file_operations esb_fops = {
	.owner = THIS_MODULE,
	.llseek = no_llseek,
	.write = esb_write,
	.unlocked_ioctl = esb_ioctl,
	.open = esb_open,
	.release = esb_release,
};

static struct miscdevice esb_miscdev = {
	.minor = WATCHDOG_MINOR,
	.name = "watchdog",
	.fops = &esb_fops,
};

/*
 * Data for PCI driver interface
 *
 * This data only exists for exporting the supported
 * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
 * register a pci_driver, because someone else might one day
 * want to register another driver on the same PCI id.
 */
static struct pci_device_id esb_pci_tbl[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
	{ 0, },                 /* End of list */
};
MODULE_DEVICE_TABLE(pci, esb_pci_tbl);

/*
 *      Init & exit routines
 */

static unsigned char __devinit esb_getdevice(void)
{
	u8 val1;
	unsigned short val2;
	/*
	 *      Find the PCI device
	 */

	esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
					PCI_DEVICE_ID_INTEL_ESB_9, NULL);

	if (esb_pci) {
		if (pci_enable_device(esb_pci)) {
			printk(KERN_ERR PFX "failed to enable device\n");
			goto err_devput;
		}

		if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
			printk(KERN_ERR PFX "failed to request region\n");
			goto err_disable;
		}

		BASEADDR = pci_ioremap_bar(esb_pci, 0);
		if (BASEADDR == NULL) {
			/* Something's wrong here, BASEADDR has to be set */
			printk(KERN_ERR PFX "failed to get BASEADDR\n");
			goto err_release;
		}

		/*
		 * The watchdog has two timers, it can be setup so that the
		 * expiry of timer1 results in an interrupt and the expiry of
		 * timer2 results in a reboot. We set it to not generate
		 * any interrupts as there is not much we can do with it
		 * right now.
		 *
		 * We also enable reboots and set the timer frequency to
		 * the PCI clock divided by 2^15 (approx 1KHz).
		 */
		pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);

		/* Check that the WDT isn't already locked */
		pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
		if (val1 & ESB_WDT_LOCK)
			printk(KERN_WARNING PFX "nowayout already set\n");

		/* Set the timer to watchdog mode and disable it for now */
		pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);

		/* Check if the watchdog was previously triggered */
		esb_unlock_registers();
		val2 = readw(ESB_RELOAD_REG);
		triggered = (val2 & (0x01 << 9) >> 9);

		/* Reset trigger flag and timers */
		esb_unlock_registers();
		writew((0x11 << 8), ESB_RELOAD_REG);

		/* Done */
		return 1;

err_release:
		pci_release_region(esb_pci, 0);
err_disable:
		pci_disable_device(esb_pci);
err_devput:
		pci_dev_put(esb_pci);
	}
	return 0;
}

static int __devinit esb_probe(struct platform_device *dev)
{
	int ret;

	/* Check whether or not the hardware watchdog is there */
	if (!esb_getdevice() || esb_pci == NULL)
		return -ENODEV;

	/* Check that the heartbeat value is within it's range;
	   if not reset to the default */
	if (esb_timer_set_heartbeat(heartbeat)) {
		esb_timer_set_heartbeat(WATCHDOG_HEARTBEAT);
		printk(KERN_INFO PFX
			"heartbeat value must be 1<heartbeat<2046, using %d\n",
								heartbeat);
	}

	ret = misc_register(&esb_miscdev);
	if (ret != 0) {
		printk(KERN_ERR PFX
			"cannot register miscdev on minor=%d (err=%d)\n",
							WATCHDOG_MINOR, ret);
		goto err_unmap;
	}
	esb_timer_stop();
	printk(KERN_INFO PFX
		"initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
						BASEADDR, heartbeat, nowayout);
	return 0;

err_unmap:
	iounmap(BASEADDR);
/* err_release: */
	pci_release_region(esb_pci, 0);
/* err_disable: */
	pci_disable_device(esb_pci);
/* err_devput: */
	pci_dev_put(esb_pci);
	return ret;
}

static int __devexit esb_remove(struct platform_device *dev)
{
	/* Stop the timer before we leave */
	if (!nowayout)
		esb_timer_stop();

	/* Deregister */
	misc_deregister(&esb_miscdev);
	iounmap(BASEADDR);
	pci_release_region(esb_pci, 0);
	pci_disable_device(esb_pci);
	pci_dev_put(esb_pci);
	return 0;
}

static void esb_shutdown(struct platform_device *dev)
{
	esb_timer_stop();
}

static struct platform_driver esb_platform_driver = {
	.probe          = esb_probe,
	.remove         = __devexit_p(esb_remove),
	.shutdown       = esb_shutdown,
	.driver         = {
		.owner  = THIS_MODULE,
		.name   = ESB_MODULE_NAME,
	},
};

static int __init watchdog_init(void)
{
	int err;

	printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n",
		ESB_VERSION);

	err = platform_driver_register(&esb_platform_driver);
	if (err)
		return err;

	esb_platform_device = platform_device_register_simple(ESB_MODULE_NAME,
								-1, NULL, 0);
	if (IS_ERR(esb_platform_device)) {
		err = PTR_ERR(esb_platform_device);
		goto unreg_platform_driver;
	}

	return 0;

unreg_platform_driver:
	platform_driver_unregister(&esb_platform_driver);
	return err;
}

static void __exit watchdog_cleanup(void)
{
	platform_device_unregister(esb_platform_device);
	platform_driver_unregister(&esb_platform_driver);
	printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
}

module_init(watchdog_init);
module_exit(watchdog_cleanup);

MODULE_AUTHOR("Ross Biro and David Härdeman");
MODULE_DESCRIPTION("Watchdog driver for Intel 6300ESB chipsets");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);