mmc: sdhci: Stop asking for mail
We get enough error reports without having to ask for it.
Remove notices about mailing the development list.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 38f0f82..7522f76 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -23,8 +23,6 @@
#define DRIVER_NAME "sdhci"
-#define BUGMAIL "<sdhci-devel@list.drzeus.cx>"
-
#define DBG(f, x...) \
pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
@@ -153,8 +151,7 @@
/* hw clears the bit when it's done */
while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) {
if (timeout == 0) {
- printk(KERN_ERR "%s: Reset 0x%x never completed. "
- "Please report this to " BUGMAIL ".\n",
+ printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
mmc_hostname(host->mmc), (int)mask);
sdhci_dumpregs(host);
return;
@@ -473,12 +470,11 @@
if ((data->error == MMC_ERR_NONE) && blocks) {
printk(KERN_ERR "%s: Controller signalled completion even "
- "though there were blocks left. Please report this "
- "to " BUGMAIL ".\n", mmc_hostname(host->mmc));
+ "though there were blocks left.\n",
+ mmc_hostname(host->mmc));
data->error = MMC_ERR_FAILED;
} else if (host->size != 0) {
- printk(KERN_ERR "%s: %d bytes were left untransferred. "
- "Please report this to " BUGMAIL ".\n",
+ printk(KERN_ERR "%s: %d bytes were left untransferred.\n",
mmc_hostname(host->mmc), host->size);
data->error = MMC_ERR_FAILED;
}
@@ -525,8 +521,7 @@
while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
if (timeout == 0) {
printk(KERN_ERR "%s: Controller never released "
- "inhibit bit(s). Please report this to "
- BUGMAIL ".\n", mmc_hostname(host->mmc));
+ "inhibit bit(s).\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
cmd->error = MMC_ERR_FAILED;
tasklet_schedule(&host->finish_tasklet);
@@ -547,8 +542,7 @@
sdhci_set_transfer_mode(host, cmd->data);
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
- printk(KERN_ERR "%s: Unsupported response type! "
- "Please report this to " BUGMAIL ".\n",
+ printk(KERN_ERR "%s: Unsupported response type!\n",
mmc_hostname(host->mmc));
cmd->error = MMC_ERR_INVALID;
tasklet_schedule(&host->finish_tasklet);
@@ -646,9 +640,8 @@
while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
- printk(KERN_ERR "%s: Internal clock never stabilised. "
- "Please report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
+ printk(KERN_ERR "%s: Internal clock never "
+ "stabilised.\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
}
@@ -898,9 +891,8 @@
spin_lock_irqsave(&host->lock, flags);
if (host->mrq) {
- printk(KERN_ERR "%s: Timeout waiting for hardware interrupt. "
- "Please report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
+ printk(KERN_ERR "%s: Timeout waiting for hardware "
+ "interrupt.\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
if (host->data) {
@@ -934,8 +926,6 @@
printk(KERN_ERR "%s: Got command interrupt even though no "
"command operation was in progress.\n",
mmc_hostname(host->mmc));
- printk(KERN_ERR "%s: Please report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
}
@@ -971,8 +961,6 @@
printk(KERN_ERR "%s: Got data interrupt even though no "
"data operation was in progress.\n",
mmc_hostname(host->mmc));
- printk(KERN_ERR "%s: Please report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
@@ -1044,8 +1032,7 @@
intmask &= SDHCI_INT_BUS_POWER;
if (intmask) {
- printk(KERN_ERR "%s: Unexpected interrupt 0x%08x. Please "
- "report this to " BUGMAIL ".\n",
+ printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
mmc_hostname(host->mmc), intmask);
sdhci_dumpregs(host);