[POWERPC] cell: add RAS support
This is a first version of support for the Cell BE "Reliability,
Availability and Serviceability" features.
It doesn't yet handle some of the RAS interrupts (the ones described in
iic_is/iic_irr), I'm still working on a proper way to expose these. They
are essentially a cascaded controller by themselves (sic !) though I may
just handle them locally to the iic driver. I need also to sync with
David Erb on the way he hooked in the performance monitor interrupt.
So that's all for 2.6.17 and I'll do more work on that with my rework of
the powerpc interrupt layer that I'm hacking on at the moment.
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h
new file mode 100644
index 0000000..e76e4a6
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cbe_regs.h
@@ -0,0 +1,129 @@
+/*
+ * cbe_regs.h
+ *
+ * This file is intended to hold the various register definitions for CBE
+ * on-chip system devices (memory controller, IO controller, etc...)
+ *
+ * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ */
+
+#ifndef CBE_REGS_H
+#define CBE_REGS_H
+
+/*
+ *
+ * Some HID register definitions
+ *
+ */
+
+/* CBE specific HID0 bits */
+#define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul
+#define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul
+#define HID0_CBE_THERM_INT_EN 0x0000000400000000ul
+#define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul
+
+
+/*
+ *
+ * Pervasive unit register definitions
+ *
+ */
+
+struct cbe_pmd_regs {
+ u8 pad_0x0000_0x0800[0x0800 - 0x0000]; /* 0x0000 */
+
+ /* Thermal Sensor Registers */
+ u64 ts_ctsr1; /* 0x0800 */
+ u64 ts_ctsr2; /* 0x0808 */
+ u64 ts_mtsr1; /* 0x0810 */
+ u64 ts_mtsr2; /* 0x0818 */
+ u64 ts_itr1; /* 0x0820 */
+ u64 ts_itr2; /* 0x0828 */
+ u64 ts_gitr; /* 0x0830 */
+ u64 ts_isr; /* 0x0838 */
+ u64 ts_imr; /* 0x0840 */
+ u64 tm_cr1; /* 0x0848 */
+ u64 tm_cr2; /* 0x0850 */
+ u64 tm_simr; /* 0x0858 */
+ u64 tm_tpr; /* 0x0860 */
+ u64 tm_str1; /* 0x0868 */
+ u64 tm_str2; /* 0x0870 */
+ u64 tm_tsr; /* 0x0878 */
+
+ /* Power Management */
+ u64 pm_control; /* 0x0880 */
+#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000
+ u64 pm_status; /* 0x0888 */
+
+ /* Time Base Register */
+ u64 tbr; /* 0x0890 */
+
+ u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */
+
+ /* Fault Isolation Registers */
+ u64 checkstop_fir; /* 0x0c00 */
+ u64 recoverable_fir;
+ u64 spec_att_mchk_fir;
+ u64 fir_mode_reg;
+ u64 fir_enable_mask;
+
+ u8 pad_0x0c28_0x1000 [0x1000 - 0x0c28]; /* 0x0c28 */
+};
+
+extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
+extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
+
+/*
+ *
+ * IIC unit register definitions
+ *
+ */
+
+struct cbe_iic_pending_bits {
+ u32 data;
+ u8 flags;
+ u8 class;
+ u8 source;
+ u8 prio;
+};
+
+#define CBE_IIC_IRQ_VALID 0x80
+#define CBE_IIC_IRQ_IPI 0x40
+
+struct cbe_iic_thread_regs {
+ struct cbe_iic_pending_bits pending;
+ struct cbe_iic_pending_bits pending_destr;
+ u64 generate;
+ u64 prio;
+};
+
+struct cbe_iic_regs {
+ u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */
+
+ /* IIC interrupt registers */
+ struct cbe_iic_thread_regs thread[2]; /* 0x0400 */
+ u64 iic_ir; /* 0x0440 */
+ u64 iic_is; /* 0x0448 */
+
+ u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */
+
+ /* IOC FIR */
+ u64 ioc_fir_reset; /* 0x0500 */
+ u64 ioc_fir_set;
+ u64 ioc_checkstop_enable;
+ u64 ioc_fir_error_mask;
+ u64 ioc_syserr_enable;
+ u64 ioc_fir;
+
+ u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */
+};
+
+extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
+extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
+
+
+/* Init this module early */
+extern void cbe_regs_init(void);
+
+
+#endif /* CBE_REGS_H */