[SCSI] qla2xxx: Add EDC-update support.
Interface allows for the update of onboard EDC firmware
present on mezzanine ISP25xx type cards.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7af9bd7..951537e 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3347,3 +3347,81 @@
return rval;
}
+
+int
+qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
+ dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_READ_SFP;
+ mcp->mb[1] = dev;
+ mcp->mb[2] = MSW(sfp_dma);
+ mcp->mb[3] = LSW(sfp_dma);
+ mcp->mb[6] = MSW(MSD(sfp_dma));
+ mcp->mb[7] = LSW(MSD(sfp_dma));
+ mcp->mb[8] = len;
+ mcp->mb[9] = adr;
+ mcp->mb[10] = opt;
+ mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (opt & BIT_0)
+ if (sfp)
+ *sfp = mcp->mb[8];
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
+ vha->host_no, rval, mcp->mb[0]));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+ }
+
+ return rval;
+}
+
+int
+qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
+ dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+ if (opt & BIT_0)
+ if (sfp)
+ len = *sfp;
+
+ mcp->mb[0] = MBC_WRITE_SFP;
+ mcp->mb[1] = dev;
+ mcp->mb[2] = MSW(sfp_dma);
+ mcp->mb[3] = LSW(sfp_dma);
+ mcp->mb[6] = MSW(MSD(sfp_dma));
+ mcp->mb[7] = LSW(MSD(sfp_dma));
+ mcp->mb[8] = len;
+ mcp->mb[9] = adr;
+ mcp->mb[10] = opt;
+ mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
+ vha->host_no, rval, mcp->mb[0]));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+ }
+
+ return rval;
+}