ARM: OMAP2420: hwmod data: Add MMC hwmod data for 2420
Add MMC for 2420 so we can pass the DMA request lines the same
way as we already do on omap2430 and later.
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
[paul@pwsan.com: updated to apply on top of the 3.5 hwmod cleanup;
changed mmc hwmod name/class to "msdi" as documented in the 2420 TRM Rev X;
added sysconfig register information; added 16 bit register width flag;
added MSDI custom reset code]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d8604a3..4eee0f1 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -189,6 +189,9 @@
obj-y += dsp.o
endif
+# OMAP2420 MSDI controller integration support ("MMC")
+obj-$(CONFIG_SOC_OMAP2420) += msdi.o
+
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
new file mode 100644
index 0000000..ef2a692
--- /dev/null
+++ b/arch/arm/mach-omap2/msdi.c
@@ -0,0 +1,88 @@
+/*
+ * MSDI IP block reset
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * XXX What about pad muxing?
+ */
+
+#include <linux/kernel.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/mmc.h>
+
+#include "common.h"
+
+/*
+ * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
+ * from the IP block's base address
+ */
+#define MSDI_CON_OFFSET 0x0c
+
+/* Register bitfields in the CON register */
+#define MSDI_CON_POW_MASK BIT(11)
+#define MSDI_CON_CLKD_MASK (0x3f << 0)
+#define MSDI_CON_CLKD_SHIFT 0
+
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT 10000
+
+/* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */
+#define MSDI_TARGET_RESET_CLKD 0x3ff
+
+/**
+ * omap_msdi_reset - reset the MSDI IP block
+ * @oh: struct omap_hwmod *
+ *
+ * The MSDI IP block on OMAP2420 has to have both the POW and CLKD
+ * fields set inside its CON register for a reset to complete
+ * successfully. This is not documented in the TRM. For CLKD, we use
+ * the value that results in the lowest possible clock rate, to attempt
+ * to avoid disturbing any cards.
+ */
+int omap_msdi_reset(struct omap_hwmod *oh)
+{
+ u16 v = 0;
+ int c = 0;
+
+ /* Write to the SOFTRESET bit */
+ omap_hwmod_softreset(oh);
+
+ /* Enable the MSDI core and internal clock */
+ v |= MSDI_CON_POW_MASK;
+ v |= MSDI_TARGET_RESET_CLKD << MSDI_CON_CLKD_SHIFT;
+ omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
+
+ /* Poll on RESETDONE bit */
+ omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+
+ if (c == MAX_MODULE_SOFTRESET_WAIT)
+ pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+ __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ else
+ pr_debug("%s: %s: softreset in %d usec\n", __func__,
+ oh->name, c);
+
+ /* Disable the MSDI internal clock */
+ v &= ~MSDI_CON_CLKD_MASK;
+ omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 2c087ff..0c08d3f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -23,6 +23,7 @@
#include <plat/dmtimer.h>
#include <plat/l3_2xxx.h>
#include <plat/l4_2xxx.h>
+#include <plat/mmc.h>
#include "omap_hwmod_common_data.h"
@@ -239,6 +240,50 @@
},
};
+static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = {
+ .rev_offs = 0x3c,
+ .sysc_offs = 0x64,
+ .syss_offs = 0x68,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
+ .name = "msdi",
+ .sysc = &omap2420_msdi_sysc,
+ .reset = &omap_msdi_reset,
+};
+
+/* msdi1 */
+static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = {
+ { .irq = 83 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = {
+ { .name = "tx", .dma_req = 61 }, /* OMAP24XX_DMA_MMC1_TX */
+ { .name = "rx", .dma_req = 62 }, /* OMAP24XX_DMA_MMC1_RX */
+ { .dma_req = -1 }
+};
+
+static struct omap_hwmod omap2420_msdi1_hwmod = {
+ .name = "msdi1",
+ .class = &omap2420_msdi_hwmod_class,
+ .mpu_irqs = omap2420_msdi1_irqs,
+ .sdma_reqs = omap2420_msdi1_sdma_reqs,
+ .main_clk = "mmc_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP2420_EN_MMC_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP2420_ST_MMC_SHIFT,
+ },
+ },
+ .flags = HWMOD_16BIT_REG,
+};
+
/*
* interfaces
*/
@@ -428,6 +473,24 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_addr_space omap2420_msdi1_addrs[] = {
+ {
+ .pa_start = 0x4809c000,
+ .pa_end = 0x4809c000 + SZ_128 - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+/* l4_core -> msdi1 */
+static struct omap_hwmod_ocp_if omap2420_l4_core__msdi1 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2420_msdi1_hwmod,
+ .clk = "mmc_ick",
+ .addr = omap2420_msdi1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
&omap2xxx_l3_main__l4_core,
&omap2xxx_mpu__l3_main,
@@ -468,6 +531,7 @@
&omap2420_l4_core__mailbox,
&omap2420_l4_core__mcbsp1,
&omap2420_l4_core__mcbsp2,
+ &omap2420_l4_core__msdi1,
NULL,
};