| /* |
| * This is the Fusion MPT base driver providing common API layer interface |
| * for access to MPT (Message Passing Technology) firmware. |
| * |
| * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c |
| * Copyright (C) 2012-2014 LSI Corporation |
| * (mailto:DL-MPTFusionLinux@lsi.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * NO WARRANTY |
| * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| * solely responsible for determining the appropriateness of using and |
| * distributing the Program and assumes all risks associated with its |
| * exercise of rights under this Agreement, including but not limited to |
| * the risks and costs of program errors, damage to or loss of data, |
| * programs or equipment, and unavailability or interruption of operations. |
| |
| * DISCLAIMER OF LIABILITY |
| * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, |
| * USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/io.h> |
| #include <linux/time.h> |
| #include <linux/kthread.h> |
| #include <linux/aer.h> |
| |
| |
| #include "mpt3sas_base.h" |
| |
| static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS]; |
| |
| |
| #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */ |
| |
| /* maximum controller queue depth */ |
| #define MAX_HBA_QUEUE_DEPTH 30000 |
| #define MAX_CHAIN_DEPTH 100000 |
| static int max_queue_depth = -1; |
| module_param(max_queue_depth, int, 0); |
| MODULE_PARM_DESC(max_queue_depth, " max controller queue depth "); |
| |
| static int max_sgl_entries = -1; |
| module_param(max_sgl_entries, int, 0); |
| MODULE_PARM_DESC(max_sgl_entries, " max sg entries "); |
| |
| static int msix_disable = -1; |
| module_param(msix_disable, int, 0); |
| MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); |
| |
| static int max_msix_vectors = 8; |
| module_param(max_msix_vectors, int, 0); |
| MODULE_PARM_DESC(max_msix_vectors, |
| " max msix vectors - (default=8)"); |
| |
| static int mpt3sas_fwfault_debug; |
| MODULE_PARM_DESC(mpt3sas_fwfault_debug, |
| " enable detection of firmware fault and halt firmware - (default=0)"); |
| |
| static int |
| _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag); |
| |
| /** |
| * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug. |
| * |
| */ |
| static int |
| _scsih_set_fwfault_debug(const char *val, struct kernel_param *kp) |
| { |
| int ret = param_set_int(val, kp); |
| struct MPT3SAS_ADAPTER *ioc; |
| |
| if (ret) |
| return ret; |
| |
| pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug); |
| list_for_each_entry(ioc, &mpt3sas_ioc_list, list) |
| ioc->fwfault_debug = mpt3sas_fwfault_debug; |
| return 0; |
| } |
| module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug, |
| param_get_int, &mpt3sas_fwfault_debug, 0644); |
| |
| /** |
| * mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc |
| * @arg: input argument, used to derive ioc |
| * |
| * Return 0 if controller is removed from pci subsystem. |
| * Return -1 for other case. |
| */ |
| static int mpt3sas_remove_dead_ioc_func(void *arg) |
| { |
| struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)arg; |
| struct pci_dev *pdev; |
| |
| if ((ioc == NULL)) |
| return -1; |
| |
| pdev = ioc->pdev; |
| if ((pdev == NULL)) |
| return -1; |
| pci_stop_and_remove_bus_device_locked(pdev); |
| return 0; |
| } |
| |
| /** |
| * _base_fault_reset_work - workq handling ioc fault conditions |
| * @work: input argument, used to derive ioc |
| * Context: sleep. |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_fault_reset_work(struct work_struct *work) |
| { |
| struct MPT3SAS_ADAPTER *ioc = |
| container_of(work, struct MPT3SAS_ADAPTER, fault_reset_work.work); |
| unsigned long flags; |
| u32 doorbell; |
| int rc; |
| struct task_struct *p; |
| |
| |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| if (ioc->shost_recovery) |
| goto rearm_timer; |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| |
| doorbell = mpt3sas_base_get_iocstate(ioc, 0); |
| if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) { |
| pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n", |
| ioc->name); |
| |
| /* |
| * Call _scsih_flush_pending_cmds callback so that we flush all |
| * pending commands back to OS. This call is required to aovid |
| * deadlock at block layer. Dead IOC will fail to do diag reset, |
| * and this call is safe since dead ioc will never return any |
| * command back from HW. |
| */ |
| ioc->schedule_dead_ioc_flush_running_cmds(ioc); |
| /* |
| * Set remove_host flag early since kernel thread will |
| * take some time to execute. |
| */ |
| ioc->remove_host = 1; |
| /*Remove the Dead Host */ |
| p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc, |
| "mpt3sas_dead_ioc_%d", ioc->id); |
| if (IS_ERR(p)) |
| pr_err(MPT3SAS_FMT |
| "%s: Running mpt3sas_dead_ioc thread failed !!!!\n", |
| ioc->name, __func__); |
| else |
| pr_err(MPT3SAS_FMT |
| "%s: Running mpt3sas_dead_ioc thread success !!!!\n", |
| ioc->name, __func__); |
| return; /* don't rearm timer */ |
| } |
| |
| if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) { |
| rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
| FORCE_BIG_HAMMER); |
| pr_warn(MPT3SAS_FMT "%s: hard reset: %s\n", ioc->name, |
| __func__, (rc == 0) ? "success" : "failed"); |
| doorbell = mpt3sas_base_get_iocstate(ioc, 0); |
| if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) |
| mpt3sas_base_fault_info(ioc, doorbell & |
| MPI2_DOORBELL_DATA_MASK); |
| if (rc && (doorbell & MPI2_IOC_STATE_MASK) != |
| MPI2_IOC_STATE_OPERATIONAL) |
| return; /* don't rearm timer */ |
| } |
| |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| rearm_timer: |
| if (ioc->fault_reset_work_q) |
| queue_delayed_work(ioc->fault_reset_work_q, |
| &ioc->fault_reset_work, |
| msecs_to_jiffies(FAULT_POLLING_INTERVAL)); |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| } |
| |
| /** |
| * mpt3sas_base_start_watchdog - start the fault_reset_work_q |
| * @ioc: per adapter object |
| * Context: sleep. |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc) |
| { |
| unsigned long flags; |
| |
| if (ioc->fault_reset_work_q) |
| return; |
| |
| /* initialize fault polling */ |
| |
| INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); |
| snprintf(ioc->fault_reset_work_q_name, |
| sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id); |
| ioc->fault_reset_work_q = |
| create_singlethread_workqueue(ioc->fault_reset_work_q_name); |
| if (!ioc->fault_reset_work_q) { |
| pr_err(MPT3SAS_FMT "%s: failed (line=%d)\n", |
| ioc->name, __func__, __LINE__); |
| return; |
| } |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| if (ioc->fault_reset_work_q) |
| queue_delayed_work(ioc->fault_reset_work_q, |
| &ioc->fault_reset_work, |
| msecs_to_jiffies(FAULT_POLLING_INTERVAL)); |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| } |
| |
| /** |
| * mpt3sas_base_stop_watchdog - stop the fault_reset_work_q |
| * @ioc: per adapter object |
| * Context: sleep. |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc) |
| { |
| unsigned long flags; |
| struct workqueue_struct *wq; |
| |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| wq = ioc->fault_reset_work_q; |
| ioc->fault_reset_work_q = NULL; |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| if (wq) { |
| if (!cancel_delayed_work_sync(&ioc->fault_reset_work)) |
| flush_workqueue(wq); |
| destroy_workqueue(wq); |
| } |
| } |
| |
| /** |
| * mpt3sas_base_fault_info - verbose translation of firmware FAULT code |
| * @ioc: per adapter object |
| * @fault_code: fault code |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code) |
| { |
| pr_err(MPT3SAS_FMT "fault_state(0x%04x)!\n", |
| ioc->name, fault_code); |
| } |
| |
| /** |
| * mpt3sas_halt_firmware - halt's mpt controller firmware |
| * @ioc: per adapter object |
| * |
| * For debugging timeout related issues. Writing 0xCOFFEE00 |
| * to the doorbell register will halt controller firmware. With |
| * the purpose to stop both driver and firmware, the enduser can |
| * obtain a ring buffer from controller UART. |
| */ |
| void |
| mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc) |
| { |
| u32 doorbell; |
| |
| if (!ioc->fwfault_debug) |
| return; |
| |
| dump_stack(); |
| |
| doorbell = readl(&ioc->chip->Doorbell); |
| if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) |
| mpt3sas_base_fault_info(ioc , doorbell); |
| else { |
| writel(0xC0FFEE00, &ioc->chip->Doorbell); |
| pr_err(MPT3SAS_FMT "Firmware is halted due to command timeout\n", |
| ioc->name); |
| } |
| |
| if (ioc->fwfault_debug == 2) |
| for (;;) |
| ; |
| else |
| panic("panic in %s\n", __func__); |
| } |
| |
| #ifdef CONFIG_SCSI_MPT3SAS_LOGGING |
| /** |
| * _base_sas_ioc_info - verbose translation of the ioc status |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @request_hdr: request mf |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply, |
| MPI2RequestHeader_t *request_hdr) |
| { |
| u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & |
| MPI2_IOCSTATUS_MASK; |
| char *desc = NULL; |
| u16 frame_sz; |
| char *func_str = NULL; |
| |
| /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */ |
| if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || |
| request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || |
| request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION) |
| return; |
| |
| if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) |
| return; |
| |
| switch (ioc_status) { |
| |
| /**************************************************************************** |
| * Common IOCStatus values for all replies |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_INVALID_FUNCTION: |
| desc = "invalid function"; |
| break; |
| case MPI2_IOCSTATUS_BUSY: |
| desc = "busy"; |
| break; |
| case MPI2_IOCSTATUS_INVALID_SGL: |
| desc = "invalid sgl"; |
| break; |
| case MPI2_IOCSTATUS_INTERNAL_ERROR: |
| desc = "internal error"; |
| break; |
| case MPI2_IOCSTATUS_INVALID_VPID: |
| desc = "invalid vpid"; |
| break; |
| case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: |
| desc = "insufficient resources"; |
| break; |
| case MPI2_IOCSTATUS_INVALID_FIELD: |
| desc = "invalid field"; |
| break; |
| case MPI2_IOCSTATUS_INVALID_STATE: |
| desc = "invalid state"; |
| break; |
| case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED: |
| desc = "op state not supported"; |
| break; |
| |
| /**************************************************************************** |
| * Config IOCStatus values |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION: |
| desc = "config invalid action"; |
| break; |
| case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE: |
| desc = "config invalid type"; |
| break; |
| case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE: |
| desc = "config invalid page"; |
| break; |
| case MPI2_IOCSTATUS_CONFIG_INVALID_DATA: |
| desc = "config invalid data"; |
| break; |
| case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS: |
| desc = "config no defaults"; |
| break; |
| case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT: |
| desc = "config cant commit"; |
| break; |
| |
| /**************************************************************************** |
| * SCSI IO Reply |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: |
| case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: |
| case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: |
| case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: |
| case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: |
| case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: |
| case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: |
| case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: |
| case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: |
| case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: |
| case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: |
| case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: |
| break; |
| |
| /**************************************************************************** |
| * For use by SCSI Initiator and SCSI Target end-to-end data protection |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: |
| desc = "eedp guard error"; |
| break; |
| case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: |
| desc = "eedp ref tag error"; |
| break; |
| case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: |
| desc = "eedp app tag error"; |
| break; |
| |
| /**************************************************************************** |
| * SCSI Target values |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX: |
| desc = "target invalid io index"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_ABORTED: |
| desc = "target aborted"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: |
| desc = "target no conn retryable"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_NO_CONNECTION: |
| desc = "target no connection"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: |
| desc = "target xfer count mismatch"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: |
| desc = "target data offset error"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: |
| desc = "target too much write data"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT: |
| desc = "target iu too short"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: |
| desc = "target ack nak timeout"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED: |
| desc = "target nak received"; |
| break; |
| |
| /**************************************************************************** |
| * Serial Attached SCSI values |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED: |
| desc = "smp request failed"; |
| break; |
| case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN: |
| desc = "smp data overrun"; |
| break; |
| |
| /**************************************************************************** |
| * Diagnostic Buffer Post / Diagnostic Release values |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED: |
| desc = "diagnostic released"; |
| break; |
| default: |
| break; |
| } |
| |
| if (!desc) |
| return; |
| |
| switch (request_hdr->Function) { |
| case MPI2_FUNCTION_CONFIG: |
| frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size; |
| func_str = "config_page"; |
| break; |
| case MPI2_FUNCTION_SCSI_TASK_MGMT: |
| frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t); |
| func_str = "task_mgmt"; |
| break; |
| case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: |
| frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t); |
| func_str = "sas_iounit_ctl"; |
| break; |
| case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: |
| frame_sz = sizeof(Mpi2SepRequest_t); |
| func_str = "enclosure"; |
| break; |
| case MPI2_FUNCTION_IOC_INIT: |
| frame_sz = sizeof(Mpi2IOCInitRequest_t); |
| func_str = "ioc_init"; |
| break; |
| case MPI2_FUNCTION_PORT_ENABLE: |
| frame_sz = sizeof(Mpi2PortEnableRequest_t); |
| func_str = "port_enable"; |
| break; |
| case MPI2_FUNCTION_SMP_PASSTHROUGH: |
| frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size; |
| func_str = "smp_passthru"; |
| break; |
| default: |
| frame_sz = 32; |
| func_str = "unknown"; |
| break; |
| } |
| |
| pr_warn(MPT3SAS_FMT "ioc_status: %s(0x%04x), request(0x%p),(%s)\n", |
| ioc->name, desc, ioc_status, request_hdr, func_str); |
| |
| _debug_dump_mf(request_hdr, frame_sz/4); |
| } |
| |
| /** |
| * _base_display_event_data - verbose translation of firmware asyn events |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_display_event_data(struct MPT3SAS_ADAPTER *ioc, |
| Mpi2EventNotificationReply_t *mpi_reply) |
| { |
| char *desc = NULL; |
| u16 event; |
| |
| if (!(ioc->logging_level & MPT_DEBUG_EVENTS)) |
| return; |
| |
| event = le16_to_cpu(mpi_reply->Event); |
| |
| switch (event) { |
| case MPI2_EVENT_LOG_DATA: |
| desc = "Log Data"; |
| break; |
| case MPI2_EVENT_STATE_CHANGE: |
| desc = "Status Change"; |
| break; |
| case MPI2_EVENT_HARD_RESET_RECEIVED: |
| desc = "Hard Reset Received"; |
| break; |
| case MPI2_EVENT_EVENT_CHANGE: |
| desc = "Event Change"; |
| break; |
| case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: |
| desc = "Device Status Change"; |
| break; |
| case MPI2_EVENT_IR_OPERATION_STATUS: |
| desc = "IR Operation Status"; |
| break; |
| case MPI2_EVENT_SAS_DISCOVERY: |
| { |
| Mpi2EventDataSasDiscovery_t *event_data = |
| (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData; |
| pr_info(MPT3SAS_FMT "Discovery: (%s)", ioc->name, |
| (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? |
| "start" : "stop"); |
| if (event_data->DiscoveryStatus) |
| pr_info("discovery_status(0x%08x)", |
| le32_to_cpu(event_data->DiscoveryStatus)); |
| pr_info("\n"); |
| return; |
| } |
| case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: |
| desc = "SAS Broadcast Primitive"; |
| break; |
| case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: |
| desc = "SAS Init Device Status Change"; |
| break; |
| case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW: |
| desc = "SAS Init Table Overflow"; |
| break; |
| case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: |
| desc = "SAS Topology Change List"; |
| break; |
| case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: |
| desc = "SAS Enclosure Device Status Change"; |
| break; |
| case MPI2_EVENT_IR_VOLUME: |
| desc = "IR Volume"; |
| break; |
| case MPI2_EVENT_IR_PHYSICAL_DISK: |
| desc = "IR Physical Disk"; |
| break; |
| case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: |
| desc = "IR Configuration Change List"; |
| break; |
| case MPI2_EVENT_LOG_ENTRY_ADDED: |
| desc = "Log Entry Added"; |
| break; |
| case MPI2_EVENT_TEMP_THRESHOLD: |
| desc = "Temperature Threshold"; |
| break; |
| } |
| |
| if (!desc) |
| return; |
| |
| pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc); |
| } |
| #endif |
| |
| /** |
| * _base_sas_log_info - verbose translation of firmware log info |
| * @ioc: per adapter object |
| * @log_info: log info |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info) |
| { |
| union loginfo_type { |
| u32 loginfo; |
| struct { |
| u32 subcode:16; |
| u32 code:8; |
| u32 originator:4; |
| u32 bus_type:4; |
| } dw; |
| }; |
| union loginfo_type sas_loginfo; |
| char *originator_str = NULL; |
| |
| sas_loginfo.loginfo = log_info; |
| if (sas_loginfo.dw.bus_type != 3 /*SAS*/) |
| return; |
| |
| /* each nexus loss loginfo */ |
| if (log_info == 0x31170000) |
| return; |
| |
| /* eat the loginfos associated with task aborts */ |
| if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info == |
| 0x31140000 || log_info == 0x31130000)) |
| return; |
| |
| switch (sas_loginfo.dw.originator) { |
| case 0: |
| originator_str = "IOP"; |
| break; |
| case 1: |
| originator_str = "PL"; |
| break; |
| case 2: |
| originator_str = "IR"; |
| break; |
| } |
| |
| pr_warn(MPT3SAS_FMT |
| "log_info(0x%08x): originator(%s), code(0x%02x), sub_code(0x%04x)\n", |
| ioc->name, log_info, |
| originator_str, sas_loginfo.dw.code, |
| sas_loginfo.dw.subcode); |
| } |
| |
| /** |
| * _base_display_reply_info - |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @msix_index: MSIX table index supplied by the OS |
| * @reply: reply message frame(lower 32bit addr) |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, |
| u32 reply) |
| { |
| MPI2DefaultReply_t *mpi_reply; |
| u16 ioc_status; |
| u32 loginfo = 0; |
| |
| mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); |
| if (unlikely(!mpi_reply)) { |
| pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n", |
| ioc->name, __FILE__, __LINE__, __func__); |
| return; |
| } |
| ioc_status = le16_to_cpu(mpi_reply->IOCStatus); |
| #ifdef CONFIG_SCSI_MPT3SAS_LOGGING |
| if ((ioc_status & MPI2_IOCSTATUS_MASK) && |
| (ioc->logging_level & MPT_DEBUG_REPLY)) { |
| _base_sas_ioc_info(ioc , mpi_reply, |
| mpt3sas_base_get_msg_frame(ioc, smid)); |
| } |
| #endif |
| if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { |
| loginfo = le32_to_cpu(mpi_reply->IOCLogInfo); |
| _base_sas_log_info(ioc, loginfo); |
| } |
| |
| if (ioc_status || loginfo) { |
| ioc_status &= MPI2_IOCSTATUS_MASK; |
| mpt3sas_trigger_mpi(ioc, ioc_status, loginfo); |
| } |
| } |
| |
| /** |
| * mpt3sas_base_done - base internal command completion routine |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @msix_index: MSIX table index supplied by the OS |
| * @reply: reply message frame(lower 32bit addr) |
| * |
| * Return 1 meaning mf should be freed from _base_interrupt |
| * 0 means the mf is freed from this function. |
| */ |
| u8 |
| mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, |
| u32 reply) |
| { |
| MPI2DefaultReply_t *mpi_reply; |
| |
| mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); |
| if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK) |
| return 1; |
| |
| if (ioc->base_cmds.status == MPT3_CMD_NOT_USED) |
| return 1; |
| |
| ioc->base_cmds.status |= MPT3_CMD_COMPLETE; |
| if (mpi_reply) { |
| ioc->base_cmds.status |= MPT3_CMD_REPLY_VALID; |
| memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); |
| } |
| ioc->base_cmds.status &= ~MPT3_CMD_PENDING; |
| |
| complete(&ioc->base_cmds.done); |
| return 1; |
| } |
| |
| /** |
| * _base_async_event - main callback handler for firmware asyn events |
| * @ioc: per adapter object |
| * @msix_index: MSIX table index supplied by the OS |
| * @reply: reply message frame(lower 32bit addr) |
| * |
| * Return 1 meaning mf should be freed from _base_interrupt |
| * 0 means the mf is freed from this function. |
| */ |
| static u8 |
| _base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply) |
| { |
| Mpi2EventNotificationReply_t *mpi_reply; |
| Mpi2EventAckRequest_t *ack_request; |
| u16 smid; |
| |
| mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); |
| if (!mpi_reply) |
| return 1; |
| if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION) |
| return 1; |
| #ifdef CONFIG_SCSI_MPT3SAS_LOGGING |
| _base_display_event_data(ioc, mpi_reply); |
| #endif |
| if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED)) |
| goto out; |
| smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); |
| if (!smid) { |
| pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| goto out; |
| } |
| |
| ack_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t)); |
| ack_request->Function = MPI2_FUNCTION_EVENT_ACK; |
| ack_request->Event = mpi_reply->Event; |
| ack_request->EventContext = mpi_reply->EventContext; |
| ack_request->VF_ID = 0; /* TODO */ |
| ack_request->VP_ID = 0; |
| mpt3sas_base_put_smid_default(ioc, smid); |
| |
| out: |
| |
| /* scsih callback handler */ |
| mpt3sas_scsih_event_callback(ioc, msix_index, reply); |
| |
| /* ctl callback handler */ |
| mpt3sas_ctl_event_callback(ioc, msix_index, reply); |
| |
| return 1; |
| } |
| |
| /** |
| * _base_get_cb_idx - obtain the callback index |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return callback index. |
| */ |
| static u8 |
| _base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| int i; |
| u8 cb_idx; |
| |
| if (smid < ioc->hi_priority_smid) { |
| i = smid - 1; |
| cb_idx = ioc->scsi_lookup[i].cb_idx; |
| } else if (smid < ioc->internal_smid) { |
| i = smid - ioc->hi_priority_smid; |
| cb_idx = ioc->hpr_lookup[i].cb_idx; |
| } else if (smid <= ioc->hba_queue_depth) { |
| i = smid - ioc->internal_smid; |
| cb_idx = ioc->internal_lookup[i].cb_idx; |
| } else |
| cb_idx = 0xFF; |
| return cb_idx; |
| } |
| |
| /** |
| * _base_mask_interrupts - disable interrupts |
| * @ioc: per adapter object |
| * |
| * Disabling ResetIRQ, Reply and Doorbell Interrupts |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc) |
| { |
| u32 him_register; |
| |
| ioc->mask_interrupts = 1; |
| him_register = readl(&ioc->chip->HostInterruptMask); |
| him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK; |
| writel(him_register, &ioc->chip->HostInterruptMask); |
| readl(&ioc->chip->HostInterruptMask); |
| } |
| |
| /** |
| * _base_unmask_interrupts - enable interrupts |
| * @ioc: per adapter object |
| * |
| * Enabling only Reply Interrupts |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc) |
| { |
| u32 him_register; |
| |
| him_register = readl(&ioc->chip->HostInterruptMask); |
| him_register &= ~MPI2_HIM_RIM; |
| writel(him_register, &ioc->chip->HostInterruptMask); |
| ioc->mask_interrupts = 0; |
| } |
| |
| union reply_descriptor { |
| u64 word; |
| struct { |
| u32 low; |
| u32 high; |
| } u; |
| }; |
| |
| /** |
| * _base_interrupt - MPT adapter (IOC) specific interrupt handler. |
| * @irq: irq number (not used) |
| * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure |
| * @r: pt_regs pointer (not used) |
| * |
| * Return IRQ_HANDLE if processed, else IRQ_NONE. |
| */ |
| static irqreturn_t |
| _base_interrupt(int irq, void *bus_id) |
| { |
| struct adapter_reply_queue *reply_q = bus_id; |
| union reply_descriptor rd; |
| u32 completed_cmds; |
| u8 request_desript_type; |
| u16 smid; |
| u8 cb_idx; |
| u32 reply; |
| u8 msix_index = reply_q->msix_index; |
| struct MPT3SAS_ADAPTER *ioc = reply_q->ioc; |
| Mpi2ReplyDescriptorsUnion_t *rpf; |
| u8 rc; |
| |
| if (ioc->mask_interrupts) |
| return IRQ_NONE; |
| |
| if (!atomic_add_unless(&reply_q->busy, 1, 1)) |
| return IRQ_NONE; |
| |
| rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index]; |
| request_desript_type = rpf->Default.ReplyFlags |
| & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; |
| if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) { |
| atomic_dec(&reply_q->busy); |
| return IRQ_NONE; |
| } |
| |
| completed_cmds = 0; |
| cb_idx = 0xFF; |
| do { |
| rd.word = le64_to_cpu(rpf->Words); |
| if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX) |
| goto out; |
| reply = 0; |
| smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1); |
| if (request_desript_type == |
| MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS || |
| request_desript_type == |
| MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) { |
| cb_idx = _base_get_cb_idx(ioc, smid); |
| if ((likely(cb_idx < MPT_MAX_CALLBACKS)) && |
| (likely(mpt_callbacks[cb_idx] != NULL))) { |
| rc = mpt_callbacks[cb_idx](ioc, smid, |
| msix_index, 0); |
| if (rc) |
| mpt3sas_base_free_smid(ioc, smid); |
| } |
| } else if (request_desript_type == |
| MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) { |
| reply = le32_to_cpu( |
| rpf->AddressReply.ReplyFrameAddress); |
| if (reply > ioc->reply_dma_max_address || |
| reply < ioc->reply_dma_min_address) |
| reply = 0; |
| if (smid) { |
| cb_idx = _base_get_cb_idx(ioc, smid); |
| if ((likely(cb_idx < MPT_MAX_CALLBACKS)) && |
| (likely(mpt_callbacks[cb_idx] != NULL))) { |
| rc = mpt_callbacks[cb_idx](ioc, smid, |
| msix_index, reply); |
| if (reply) |
| _base_display_reply_info(ioc, |
| smid, msix_index, reply); |
| if (rc) |
| mpt3sas_base_free_smid(ioc, |
| smid); |
| } |
| } else { |
| _base_async_event(ioc, msix_index, reply); |
| } |
| |
| /* reply free queue handling */ |
| if (reply) { |
| ioc->reply_free_host_index = |
| (ioc->reply_free_host_index == |
| (ioc->reply_free_queue_depth - 1)) ? |
| 0 : ioc->reply_free_host_index + 1; |
| ioc->reply_free[ioc->reply_free_host_index] = |
| cpu_to_le32(reply); |
| wmb(); |
| writel(ioc->reply_free_host_index, |
| &ioc->chip->ReplyFreeHostIndex); |
| } |
| } |
| |
| rpf->Words = cpu_to_le64(ULLONG_MAX); |
| reply_q->reply_post_host_index = |
| (reply_q->reply_post_host_index == |
| (ioc->reply_post_queue_depth - 1)) ? 0 : |
| reply_q->reply_post_host_index + 1; |
| request_desript_type = |
| reply_q->reply_post_free[reply_q->reply_post_host_index]. |
| Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; |
| completed_cmds++; |
| if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) |
| goto out; |
| if (!reply_q->reply_post_host_index) |
| rpf = reply_q->reply_post_free; |
| else |
| rpf++; |
| } while (1); |
| |
| out: |
| |
| if (!completed_cmds) { |
| atomic_dec(&reply_q->busy); |
| return IRQ_NONE; |
| } |
| |
| wmb(); |
| writel(reply_q->reply_post_host_index | (msix_index << |
| MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex); |
| atomic_dec(&reply_q->busy); |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * _base_is_controller_msix_enabled - is controller support muli-reply queues |
| * @ioc: per adapter object |
| * |
| */ |
| static inline int |
| _base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc) |
| { |
| return (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable; |
| } |
| |
| /** |
| * mpt3sas_base_flush_reply_queues - flushing the MSIX reply queues |
| * @ioc: per adapter object |
| * Context: ISR conext |
| * |
| * Called when a Task Management request has completed. We want |
| * to flush the other reply queues so all the outstanding IO has been |
| * completed back to OS before we process the TM completetion. |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_flush_reply_queues(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct adapter_reply_queue *reply_q; |
| |
| /* If MSIX capability is turned off |
| * then multi-queues are not enabled |
| */ |
| if (!_base_is_controller_msix_enabled(ioc)) |
| return; |
| |
| list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { |
| if (ioc->shost_recovery) |
| return; |
| /* TMs are on msix_index == 0 */ |
| if (reply_q->msix_index == 0) |
| continue; |
| _base_interrupt(reply_q->vector, (void *)reply_q); |
| } |
| } |
| |
| /** |
| * mpt3sas_base_release_callback_handler - clear interrupt callback handler |
| * @cb_idx: callback index |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_release_callback_handler(u8 cb_idx) |
| { |
| mpt_callbacks[cb_idx] = NULL; |
| } |
| |
| /** |
| * mpt3sas_base_register_callback_handler - obtain index for the interrupt callback handler |
| * @cb_func: callback function |
| * |
| * Returns cb_func. |
| */ |
| u8 |
| mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func) |
| { |
| u8 cb_idx; |
| |
| for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--) |
| if (mpt_callbacks[cb_idx] == NULL) |
| break; |
| |
| mpt_callbacks[cb_idx] = cb_func; |
| return cb_idx; |
| } |
| |
| /** |
| * mpt3sas_base_initialize_callback_handler - initialize the interrupt callback handler |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_initialize_callback_handler(void) |
| { |
| u8 cb_idx; |
| |
| for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++) |
| mpt3sas_base_release_callback_handler(cb_idx); |
| } |
| |
| |
| /** |
| * _base_build_zero_len_sge - build zero length sg entry |
| * @ioc: per adapter object |
| * @paddr: virtual address for SGE |
| * |
| * Create a zero length scatter gather entry to insure the IOCs hardware has |
| * something to use if the target device goes brain dead and tries |
| * to send data even when none is asked for. |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_build_zero_len_sge(struct MPT3SAS_ADAPTER *ioc, void *paddr) |
| { |
| u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT | |
| MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST | |
| MPI2_SGE_FLAGS_SIMPLE_ELEMENT) << |
| MPI2_SGE_FLAGS_SHIFT); |
| ioc->base_add_sg_single(paddr, flags_length, -1); |
| } |
| |
| /** |
| * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr. |
| * @paddr: virtual address for SGE |
| * @flags_length: SGE flags and data transfer length |
| * @dma_addr: Physical address |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr) |
| { |
| Mpi2SGESimple32_t *sgel = paddr; |
| |
| flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING | |
| MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; |
| sgel->FlagsLength = cpu_to_le32(flags_length); |
| sgel->Address = cpu_to_le32(dma_addr); |
| } |
| |
| |
| /** |
| * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr. |
| * @paddr: virtual address for SGE |
| * @flags_length: SGE flags and data transfer length |
| * @dma_addr: Physical address |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr) |
| { |
| Mpi2SGESimple64_t *sgel = paddr; |
| |
| flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING | |
| MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; |
| sgel->FlagsLength = cpu_to_le32(flags_length); |
| sgel->Address = cpu_to_le64(dma_addr); |
| } |
| |
| /** |
| * _base_get_chain_buffer_tracker - obtain chain tracker |
| * @ioc: per adapter object |
| * @smid: smid associated to an IO request |
| * |
| * Returns chain tracker(from ioc->free_chain_list) |
| */ |
| static struct chain_tracker * |
| _base_get_chain_buffer_tracker(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| struct chain_tracker *chain_req; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| if (list_empty(&ioc->free_chain_list)) { |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| dfailprintk(ioc, pr_warn(MPT3SAS_FMT |
| "chain buffers not available\n", ioc->name)); |
| return NULL; |
| } |
| chain_req = list_entry(ioc->free_chain_list.next, |
| struct chain_tracker, tracker_list); |
| list_del_init(&chain_req->tracker_list); |
| list_add_tail(&chain_req->tracker_list, |
| &ioc->scsi_lookup[smid - 1].chain_list); |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| return chain_req; |
| } |
| |
| |
| /** |
| * _base_build_sg - build generic sg |
| * @ioc: per adapter object |
| * @psge: virtual address for SGE |
| * @data_out_dma: physical address for WRITES |
| * @data_out_sz: data xfer size for WRITES |
| * @data_in_dma: physical address for READS |
| * @data_in_sz: data xfer size for READS |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge, |
| dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma, |
| size_t data_in_sz) |
| { |
| u32 sgl_flags; |
| |
| if (!data_out_sz && !data_in_sz) { |
| _base_build_zero_len_sge(ioc, psge); |
| return; |
| } |
| |
| if (data_out_sz && data_in_sz) { |
| /* WRITE sgel first */ |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_out_sz, data_out_dma); |
| |
| /* incr sgel */ |
| psge += ioc->sge_size; |
| |
| /* READ sgel last */ |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | |
| MPI2_SGE_FLAGS_END_OF_LIST); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_in_sz, data_in_dma); |
| } else if (data_out_sz) /* WRITE */ { |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | |
| MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_out_sz, data_out_dma); |
| } else if (data_in_sz) /* READ */ { |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | |
| MPI2_SGE_FLAGS_END_OF_LIST); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_in_sz, data_in_dma); |
| } |
| } |
| |
| /* IEEE format sgls */ |
| |
| /** |
| * _base_add_sg_single_ieee - add sg element for IEEE format |
| * @paddr: virtual address for SGE |
| * @flags: SGE flags |
| * @chain_offset: number of 128 byte elements from start of segment |
| * @length: data transfer length |
| * @dma_addr: Physical address |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_add_sg_single_ieee(void *paddr, u8 flags, u8 chain_offset, u32 length, |
| dma_addr_t dma_addr) |
| { |
| Mpi25IeeeSgeChain64_t *sgel = paddr; |
| |
| sgel->Flags = flags; |
| sgel->NextChainOffset = chain_offset; |
| sgel->Length = cpu_to_le32(length); |
| sgel->Address = cpu_to_le64(dma_addr); |
| } |
| |
| /** |
| * _base_build_zero_len_sge_ieee - build zero length sg entry for IEEE format |
| * @ioc: per adapter object |
| * @paddr: virtual address for SGE |
| * |
| * Create a zero length scatter gather entry to insure the IOCs hardware has |
| * something to use if the target device goes brain dead and tries |
| * to send data even when none is asked for. |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr) |
| { |
| u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR | |
| MPI25_IEEE_SGE_FLAGS_END_OF_LIST); |
| _base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1); |
| } |
| |
| /** |
| * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format |
| * @ioc: per adapter object |
| * @scmd: scsi command |
| * @smid: system request message index |
| * Context: none. |
| * |
| * The main routine that builds scatter gather table from a given |
| * scsi request sent via the .queuecommand main handler. |
| * |
| * Returns 0 success, anything else error |
| */ |
| static int |
| _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc, |
| struct scsi_cmnd *scmd, u16 smid) |
| { |
| Mpi2SCSIIORequest_t *mpi_request; |
| dma_addr_t chain_dma; |
| struct scatterlist *sg_scmd; |
| void *sg_local, *chain; |
| u32 chain_offset; |
| u32 chain_length; |
| int sges_left; |
| u32 sges_in_segment; |
| u8 simple_sgl_flags; |
| u8 simple_sgl_flags_last; |
| u8 chain_sgl_flags; |
| struct chain_tracker *chain_req; |
| |
| mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| |
| /* init scatter gather flags */ |
| simple_sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; |
| simple_sgl_flags_last = simple_sgl_flags | |
| MPI25_IEEE_SGE_FLAGS_END_OF_LIST; |
| chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; |
| |
| sg_scmd = scsi_sglist(scmd); |
| sges_left = scsi_dma_map(scmd); |
| if (!sges_left) { |
| sdev_printk(KERN_ERR, scmd->device, |
| "pci_map_sg failed: request for %d bytes!\n", |
| scsi_bufflen(scmd)); |
| return -ENOMEM; |
| } |
| |
| sg_local = &mpi_request->SGL; |
| sges_in_segment = (ioc->request_sz - |
| offsetof(Mpi2SCSIIORequest_t, SGL))/ioc->sge_size_ieee; |
| if (sges_left <= sges_in_segment) |
| goto fill_in_last_segment; |
| |
| mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) + |
| (offsetof(Mpi2SCSIIORequest_t, SGL)/ioc->sge_size_ieee); |
| |
| /* fill in main message segment when there is a chain following */ |
| while (sges_in_segment > 1) { |
| _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, |
| sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); |
| sg_scmd = sg_next(sg_scmd); |
| sg_local += ioc->sge_size_ieee; |
| sges_left--; |
| sges_in_segment--; |
| } |
| |
| /* initializing the pointers */ |
| chain_req = _base_get_chain_buffer_tracker(ioc, smid); |
| if (!chain_req) |
| return -1; |
| chain = chain_req->chain_buffer; |
| chain_dma = chain_req->chain_buffer_dma; |
| do { |
| sges_in_segment = (sges_left <= |
| ioc->max_sges_in_chain_message) ? sges_left : |
| ioc->max_sges_in_chain_message; |
| chain_offset = (sges_left == sges_in_segment) ? |
| 0 : sges_in_segment; |
| chain_length = sges_in_segment * ioc->sge_size_ieee; |
| if (chain_offset) |
| chain_length += ioc->sge_size_ieee; |
| _base_add_sg_single_ieee(sg_local, chain_sgl_flags, |
| chain_offset, chain_length, chain_dma); |
| |
| sg_local = chain; |
| if (!chain_offset) |
| goto fill_in_last_segment; |
| |
| /* fill in chain segments */ |
| while (sges_in_segment) { |
| _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, |
| sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); |
| sg_scmd = sg_next(sg_scmd); |
| sg_local += ioc->sge_size_ieee; |
| sges_left--; |
| sges_in_segment--; |
| } |
| |
| chain_req = _base_get_chain_buffer_tracker(ioc, smid); |
| if (!chain_req) |
| return -1; |
| chain = chain_req->chain_buffer; |
| chain_dma = chain_req->chain_buffer_dma; |
| } while (1); |
| |
| |
| fill_in_last_segment: |
| |
| /* fill the last segment */ |
| while (sges_left) { |
| if (sges_left == 1) |
| _base_add_sg_single_ieee(sg_local, |
| simple_sgl_flags_last, 0, sg_dma_len(sg_scmd), |
| sg_dma_address(sg_scmd)); |
| else |
| _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, |
| sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); |
| sg_scmd = sg_next(sg_scmd); |
| sg_local += ioc->sge_size_ieee; |
| sges_left--; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * _base_build_sg_ieee - build generic sg for IEEE format |
| * @ioc: per adapter object |
| * @psge: virtual address for SGE |
| * @data_out_dma: physical address for WRITES |
| * @data_out_sz: data xfer size for WRITES |
| * @data_in_dma: physical address for READS |
| * @data_in_sz: data xfer size for READS |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge, |
| dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma, |
| size_t data_in_sz) |
| { |
| u8 sgl_flags; |
| |
| if (!data_out_sz && !data_in_sz) { |
| _base_build_zero_len_sge_ieee(ioc, psge); |
| return; |
| } |
| |
| if (data_out_sz && data_in_sz) { |
| /* WRITE sgel first */ |
| sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; |
| _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz, |
| data_out_dma); |
| |
| /* incr sgel */ |
| psge += ioc->sge_size_ieee; |
| |
| /* READ sgel last */ |
| sgl_flags |= MPI25_IEEE_SGE_FLAGS_END_OF_LIST; |
| _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz, |
| data_in_dma); |
| } else if (data_out_sz) /* WRITE */ { |
| sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI25_IEEE_SGE_FLAGS_END_OF_LIST | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; |
| _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz, |
| data_out_dma); |
| } else if (data_in_sz) /* READ */ { |
| sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI25_IEEE_SGE_FLAGS_END_OF_LIST | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; |
| _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz, |
| data_in_dma); |
| } |
| } |
| |
| #define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10)) |
| |
| /** |
| * _base_config_dma_addressing - set dma addressing |
| * @ioc: per adapter object |
| * @pdev: PCI device struct |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) |
| { |
| struct sysinfo s; |
| u64 consistent_dma_mask; |
| |
| if (ioc->dma_mask) |
| consistent_dma_mask = DMA_BIT_MASK(64); |
| else |
| consistent_dma_mask = DMA_BIT_MASK(32); |
| |
| if (sizeof(dma_addr_t) > 4) { |
| const uint64_t required_mask = |
| dma_get_required_mask(&pdev->dev); |
| if ((required_mask > DMA_BIT_MASK(32)) && |
| !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && |
| !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) { |
| ioc->base_add_sg_single = &_base_add_sg_single_64; |
| ioc->sge_size = sizeof(Mpi2SGESimple64_t); |
| ioc->dma_mask = 64; |
| goto out; |
| } |
| } |
| |
| if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) |
| && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { |
| ioc->base_add_sg_single = &_base_add_sg_single_32; |
| ioc->sge_size = sizeof(Mpi2SGESimple32_t); |
| ioc->dma_mask = 32; |
| } else |
| return -ENODEV; |
| |
| out: |
| si_meminfo(&s); |
| pr_info(MPT3SAS_FMT |
| "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n", |
| ioc->name, ioc->dma_mask, convert_to_kb(s.totalram)); |
| |
| return 0; |
| } |
| |
| static int |
| _base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc, |
| struct pci_dev *pdev) |
| { |
| if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { |
| if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| /** |
| * _base_check_enable_msix - checks MSIX capabable. |
| * @ioc: per adapter object |
| * |
| * Check to see if card is capable of MSIX, and set number |
| * of available msix vectors |
| */ |
| static int |
| _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int base; |
| u16 message_control; |
| |
| base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); |
| if (!base) { |
| dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n", |
| ioc->name)); |
| return -EINVAL; |
| } |
| |
| /* get msix vector count */ |
| |
| pci_read_config_word(ioc->pdev, base + 2, &message_control); |
| ioc->msix_vector_count = (message_control & 0x3FF) + 1; |
| if (ioc->msix_vector_count > 8) |
| ioc->msix_vector_count = 8; |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "msix is supported, vector_count(%d)\n", |
| ioc->name, ioc->msix_vector_count)); |
| return 0; |
| } |
| |
| /** |
| * _base_free_irq - free irq |
| * @ioc: per adapter object |
| * |
| * Freeing respective reply_queue from the list. |
| */ |
| static void |
| _base_free_irq(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct adapter_reply_queue *reply_q, *next; |
| |
| if (list_empty(&ioc->reply_queue_list)) |
| return; |
| |
| list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { |
| list_del(&reply_q->list); |
| synchronize_irq(reply_q->vector); |
| free_irq(reply_q->vector, reply_q); |
| kfree(reply_q); |
| } |
| } |
| |
| /** |
| * _base_request_irq - request irq |
| * @ioc: per adapter object |
| * @index: msix index into vector table |
| * @vector: irq vector |
| * |
| * Inserting respective reply_queue into the list. |
| */ |
| static int |
| _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector) |
| { |
| struct adapter_reply_queue *reply_q; |
| int r; |
| |
| reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL); |
| if (!reply_q) { |
| pr_err(MPT3SAS_FMT "unable to allocate memory %d!\n", |
| ioc->name, (int)sizeof(struct adapter_reply_queue)); |
| return -ENOMEM; |
| } |
| reply_q->ioc = ioc; |
| reply_q->msix_index = index; |
| reply_q->vector = vector; |
| atomic_set(&reply_q->busy, 0); |
| if (ioc->msix_enable) |
| snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d", |
| MPT3SAS_DRIVER_NAME, ioc->id, index); |
| else |
| snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d", |
| MPT3SAS_DRIVER_NAME, ioc->id); |
| r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name, |
| reply_q); |
| if (r) { |
| pr_err(MPT3SAS_FMT "unable to allocate interrupt %d!\n", |
| reply_q->name, vector); |
| kfree(reply_q); |
| return -EBUSY; |
| } |
| |
| INIT_LIST_HEAD(&reply_q->list); |
| list_add_tail(&reply_q->list, &ioc->reply_queue_list); |
| return 0; |
| } |
| |
| /** |
| * _base_assign_reply_queues - assigning msix index for each cpu |
| * @ioc: per adapter object |
| * |
| * The enduser would need to set the affinity via /proc/irq/#/smp_affinity |
| * |
| * It would nice if we could call irq_set_affinity, however it is not |
| * an exported symbol |
| */ |
| static void |
| _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) |
| { |
| unsigned int cpu, nr_cpus, nr_msix, index = 0; |
| |
| if (!_base_is_controller_msix_enabled(ioc)) |
| return; |
| |
| memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz); |
| |
| nr_cpus = num_online_cpus(); |
| nr_msix = ioc->reply_queue_count = min(ioc->reply_queue_count, |
| ioc->facts.MaxMSIxVectors); |
| if (!nr_msix) |
| return; |
| |
| cpu = cpumask_first(cpu_online_mask); |
| |
| do { |
| unsigned int i, group = nr_cpus / nr_msix; |
| |
| if (index < nr_cpus % nr_msix) |
| group++; |
| |
| for (i = 0 ; i < group ; i++) { |
| ioc->cpu_msix_table[cpu] = index; |
| cpu = cpumask_next(cpu, cpu_online_mask); |
| } |
| |
| index++; |
| |
| } while (cpu < nr_cpus); |
| } |
| |
| /** |
| * _base_disable_msix - disables msix |
| * @ioc: per adapter object |
| * |
| */ |
| static void |
| _base_disable_msix(struct MPT3SAS_ADAPTER *ioc) |
| { |
| if (!ioc->msix_enable) |
| return; |
| pci_disable_msix(ioc->pdev); |
| ioc->msix_enable = 0; |
| } |
| |
| /** |
| * _base_enable_msix - enables msix, failback to io_apic |
| * @ioc: per adapter object |
| * |
| */ |
| static int |
| _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct msix_entry *entries, *a; |
| int r; |
| int i; |
| u8 try_msix = 0; |
| |
| if (msix_disable == -1 || msix_disable == 0) |
| try_msix = 1; |
| |
| if (!try_msix) |
| goto try_ioapic; |
| |
| if (_base_check_enable_msix(ioc) != 0) |
| goto try_ioapic; |
| |
| ioc->reply_queue_count = min_t(int, ioc->cpu_count, |
| ioc->msix_vector_count); |
| |
| printk(MPT3SAS_FMT "MSI-X vectors supported: %d, no of cores" |
| ": %d, max_msix_vectors: %d\n", ioc->name, ioc->msix_vector_count, |
| ioc->cpu_count, max_msix_vectors); |
| |
| if (!ioc->rdpq_array_enable && max_msix_vectors == -1) |
| max_msix_vectors = 8; |
| |
| if (max_msix_vectors > 0) { |
| ioc->reply_queue_count = min_t(int, max_msix_vectors, |
| ioc->reply_queue_count); |
| ioc->msix_vector_count = ioc->reply_queue_count; |
| } else if (max_msix_vectors == 0) |
| goto try_ioapic; |
| |
| entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry), |
| GFP_KERNEL); |
| if (!entries) { |
| dfailprintk(ioc, pr_info(MPT3SAS_FMT |
| "kcalloc failed @ at %s:%d/%s() !!!\n", |
| ioc->name, __FILE__, __LINE__, __func__)); |
| goto try_ioapic; |
| } |
| |
| for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) |
| a->entry = i; |
| |
| r = pci_enable_msix_exact(ioc->pdev, entries, ioc->reply_queue_count); |
| if (r) { |
| dfailprintk(ioc, pr_info(MPT3SAS_FMT |
| "pci_enable_msix_exact failed (r=%d) !!!\n", |
| ioc->name, r)); |
| kfree(entries); |
| goto try_ioapic; |
| } |
| |
| ioc->msix_enable = 1; |
| for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) { |
| r = _base_request_irq(ioc, i, a->vector); |
| if (r) { |
| _base_free_irq(ioc); |
| _base_disable_msix(ioc); |
| kfree(entries); |
| goto try_ioapic; |
| } |
| } |
| |
| kfree(entries); |
| return 0; |
| |
| /* failback to io_apic interrupt routing */ |
| try_ioapic: |
| |
| ioc->reply_queue_count = 1; |
| r = _base_request_irq(ioc, 0, ioc->pdev->irq); |
| |
| return r; |
| } |
| |
| /** |
| * mpt3sas_base_map_resources - map in controller resources (io/irq/memap) |
| * @ioc: per adapter object |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct pci_dev *pdev = ioc->pdev; |
| u32 memap_sz; |
| u32 pio_sz; |
| int i, r = 0; |
| u64 pio_chip = 0; |
| u64 chip_phys = 0; |
| struct adapter_reply_queue *reply_q; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", |
| ioc->name, __func__)); |
| |
| ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); |
| if (pci_enable_device_mem(pdev)) { |
| pr_warn(MPT3SAS_FMT "pci_enable_device_mem: failed\n", |
| ioc->name); |
| ioc->bars = 0; |
| return -ENODEV; |
| } |
| |
| |
| if (pci_request_selected_regions(pdev, ioc->bars, |
| MPT3SAS_DRIVER_NAME)) { |
| pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n", |
| ioc->name); |
| ioc->bars = 0; |
| r = -ENODEV; |
| goto out_fail; |
| } |
| |
| /* AER (Advanced Error Reporting) hooks */ |
| pci_enable_pcie_error_reporting(pdev); |
| |
| pci_set_master(pdev); |
| |
| |
| if (_base_config_dma_addressing(ioc, pdev) != 0) { |
| pr_warn(MPT3SAS_FMT "no suitable DMA mask for %s\n", |
| ioc->name, pci_name(pdev)); |
| r = -ENODEV; |
| goto out_fail; |
| } |
| |
| for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) { |
| if (pci_resource_flags(pdev, i) & IORESOURCE_IO) { |
| if (pio_sz) |
| continue; |
| pio_chip = (u64)pci_resource_start(pdev, i); |
| pio_sz = pci_resource_len(pdev, i); |
| } else if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { |
| if (memap_sz) |
| continue; |
| ioc->chip_phys = pci_resource_start(pdev, i); |
| chip_phys = (u64)ioc->chip_phys; |
| memap_sz = pci_resource_len(pdev, i); |
| ioc->chip = ioremap(ioc->chip_phys, memap_sz); |
| if (ioc->chip == NULL) { |
| pr_err(MPT3SAS_FMT "unable to map adapter memory!\n", |
| ioc->name); |
| r = -EINVAL; |
| goto out_fail; |
| } |
| } |
| } |
| |
| _base_mask_interrupts(ioc); |
| |
| r = _base_get_ioc_facts(ioc, CAN_SLEEP); |
| if (r) |
| goto out_fail; |
| |
| if (!ioc->rdpq_array_enable_assigned) { |
| ioc->rdpq_array_enable = ioc->rdpq_array_capable; |
| ioc->rdpq_array_enable_assigned = 1; |
| } |
| |
| r = _base_enable_msix(ioc); |
| if (r) |
| goto out_fail; |
| |
| list_for_each_entry(reply_q, &ioc->reply_queue_list, list) |
| pr_info(MPT3SAS_FMT "%s: IRQ %d\n", |
| reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" : |
| "IO-APIC enabled"), reply_q->vector); |
| |
| pr_info(MPT3SAS_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n", |
| ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz); |
| pr_info(MPT3SAS_FMT "ioport(0x%016llx), size(%d)\n", |
| ioc->name, (unsigned long long)pio_chip, pio_sz); |
| |
| /* Save PCI configuration state for recovery from PCI AER/EEH errors */ |
| pci_save_state(pdev); |
| return 0; |
| |
| out_fail: |
| if (ioc->chip_phys) |
| iounmap(ioc->chip); |
| ioc->chip_phys = 0; |
| pci_release_selected_regions(ioc->pdev, ioc->bars); |
| pci_disable_pcie_error_reporting(pdev); |
| pci_disable_device(pdev); |
| return r; |
| } |
| |
| /** |
| * mpt3sas_base_get_msg_frame - obtain request mf pointer |
| * @ioc: per adapter object |
| * @smid: system request message index(smid zero is invalid) |
| * |
| * Returns virt pointer to message frame. |
| */ |
| void * |
| mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| return (void *)(ioc->request + (smid * ioc->request_sz)); |
| } |
| |
| /** |
| * mpt3sas_base_get_sense_buffer - obtain a sense buffer virt addr |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Returns virt pointer to sense buffer. |
| */ |
| void * |
| mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE)); |
| } |
| |
| /** |
| * mpt3sas_base_get_sense_buffer_dma - obtain a sense buffer dma addr |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Returns phys pointer to the low 32bit address of the sense buffer. |
| */ |
| __le32 |
| mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| return cpu_to_le32(ioc->sense_dma + ((smid - 1) * |
| SCSI_SENSE_BUFFERSIZE)); |
| } |
| |
| /** |
| * mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address |
| * @ioc: per adapter object |
| * @phys_addr: lower 32 physical addr of the reply |
| * |
| * Converts 32bit lower physical addr into a virt address. |
| */ |
| void * |
| mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr) |
| { |
| if (!phys_addr) |
| return NULL; |
| return ioc->reply + (phys_addr - (u32)ioc->reply_dma); |
| } |
| |
| /** |
| * mpt3sas_base_get_smid - obtain a free smid from internal queue |
| * @ioc: per adapter object |
| * @cb_idx: callback index |
| * |
| * Returns smid (zero is invalid) |
| */ |
| u16 |
| mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx) |
| { |
| unsigned long flags; |
| struct request_tracker *request; |
| u16 smid; |
| |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| if (list_empty(&ioc->internal_free_list)) { |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| pr_err(MPT3SAS_FMT "%s: smid not available\n", |
| ioc->name, __func__); |
| return 0; |
| } |
| |
| request = list_entry(ioc->internal_free_list.next, |
| struct request_tracker, tracker_list); |
| request->cb_idx = cb_idx; |
| smid = request->smid; |
| list_del(&request->tracker_list); |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| return smid; |
| } |
| |
| /** |
| * mpt3sas_base_get_smid_scsiio - obtain a free smid from scsiio queue |
| * @ioc: per adapter object |
| * @cb_idx: callback index |
| * @scmd: pointer to scsi command object |
| * |
| * Returns smid (zero is invalid) |
| */ |
| u16 |
| mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx, |
| struct scsi_cmnd *scmd) |
| { |
| unsigned long flags; |
| struct scsiio_tracker *request; |
| u16 smid; |
| |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| if (list_empty(&ioc->free_list)) { |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| pr_err(MPT3SAS_FMT "%s: smid not available\n", |
| ioc->name, __func__); |
| return 0; |
| } |
| |
| request = list_entry(ioc->free_list.next, |
| struct scsiio_tracker, tracker_list); |
| request->scmd = scmd; |
| request->cb_idx = cb_idx; |
| smid = request->smid; |
| list_del(&request->tracker_list); |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| return smid; |
| } |
| |
| /** |
| * mpt3sas_base_get_smid_hpr - obtain a free smid from hi-priority queue |
| * @ioc: per adapter object |
| * @cb_idx: callback index |
| * |
| * Returns smid (zero is invalid) |
| */ |
| u16 |
| mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx) |
| { |
| unsigned long flags; |
| struct request_tracker *request; |
| u16 smid; |
| |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| if (list_empty(&ioc->hpr_free_list)) { |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| return 0; |
| } |
| |
| request = list_entry(ioc->hpr_free_list.next, |
| struct request_tracker, tracker_list); |
| request->cb_idx = cb_idx; |
| smid = request->smid; |
| list_del(&request->tracker_list); |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| return smid; |
| } |
| |
| /** |
| * mpt3sas_base_free_smid - put smid back on free_list |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| unsigned long flags; |
| int i; |
| struct chain_tracker *chain_req, *next; |
| |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| if (smid < ioc->hi_priority_smid) { |
| /* scsiio queue */ |
| i = smid - 1; |
| if (!list_empty(&ioc->scsi_lookup[i].chain_list)) { |
| list_for_each_entry_safe(chain_req, next, |
| &ioc->scsi_lookup[i].chain_list, tracker_list) { |
| list_del_init(&chain_req->tracker_list); |
| list_add(&chain_req->tracker_list, |
| &ioc->free_chain_list); |
| } |
| } |
| ioc->scsi_lookup[i].cb_idx = 0xFF; |
| ioc->scsi_lookup[i].scmd = NULL; |
| list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list); |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| |
| /* |
| * See _wait_for_commands_to_complete() call with regards |
| * to this code. |
| */ |
| if (ioc->shost_recovery && ioc->pending_io_count) { |
| if (ioc->pending_io_count == 1) |
| wake_up(&ioc->reset_wq); |
| ioc->pending_io_count--; |
| } |
| return; |
| } else if (smid < ioc->internal_smid) { |
| /* hi-priority */ |
| i = smid - ioc->hi_priority_smid; |
| ioc->hpr_lookup[i].cb_idx = 0xFF; |
| list_add(&ioc->hpr_lookup[i].tracker_list, &ioc->hpr_free_list); |
| } else if (smid <= ioc->hba_queue_depth) { |
| /* internal queue */ |
| i = smid - ioc->internal_smid; |
| ioc->internal_lookup[i].cb_idx = 0xFF; |
| list_add(&ioc->internal_lookup[i].tracker_list, |
| &ioc->internal_free_list); |
| } |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| } |
| |
| /** |
| * _base_writeq - 64 bit write to MMIO |
| * @ioc: per adapter object |
| * @b: data payload |
| * @addr: address in MMIO space |
| * @writeq_lock: spin lock |
| * |
| * Glue for handling an atomic 64 bit word to MMIO. This special handling takes |
| * care of 32 bit environment where its not quarenteed to send the entire word |
| * in one transfer. |
| */ |
| #if defined(writeq) && defined(CONFIG_64BIT) |
| static inline void |
| _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) |
| { |
| writeq(cpu_to_le64(b), addr); |
| } |
| #else |
| static inline void |
| _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) |
| { |
| unsigned long flags; |
| __u64 data_out = cpu_to_le64(b); |
| |
| spin_lock_irqsave(writeq_lock, flags); |
| writel((u32)(data_out), addr); |
| writel((u32)(data_out >> 32), (addr + 4)); |
| spin_unlock_irqrestore(writeq_lock, flags); |
| } |
| #endif |
| |
| static inline u8 |
| _base_get_msix_index(struct MPT3SAS_ADAPTER *ioc) |
| { |
| return ioc->cpu_msix_table[raw_smp_processor_id()]; |
| } |
| |
| /** |
| * mpt3sas_base_put_smid_scsi_io - send SCSI_IO request to firmware |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @handle: device handle |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle) |
| { |
| Mpi2RequestDescriptorUnion_t descriptor; |
| u64 *request = (u64 *)&descriptor; |
| |
| |
| descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; |
| descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc); |
| descriptor.SCSIIO.SMID = cpu_to_le16(smid); |
| descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); |
| descriptor.SCSIIO.LMID = 0; |
| _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| } |
| |
| /** |
| * mpt3sas_base_put_smid_fast_path - send fast path request to firmware |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @handle: device handle |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, |
| u16 handle) |
| { |
| Mpi2RequestDescriptorUnion_t descriptor; |
| u64 *request = (u64 *)&descriptor; |
| |
| descriptor.SCSIIO.RequestFlags = |
| MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO; |
| descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc); |
| descriptor.SCSIIO.SMID = cpu_to_le16(smid); |
| descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); |
| descriptor.SCSIIO.LMID = 0; |
| _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| } |
| |
| /** |
| * mpt3sas_base_put_smid_hi_priority - send Task Managment request to firmware |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| Mpi2RequestDescriptorUnion_t descriptor; |
| u64 *request = (u64 *)&descriptor; |
| |
| descriptor.HighPriority.RequestFlags = |
| MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; |
| descriptor.HighPriority.MSIxIndex = 0; |
| descriptor.HighPriority.SMID = cpu_to_le16(smid); |
| descriptor.HighPriority.LMID = 0; |
| descriptor.HighPriority.Reserved1 = 0; |
| _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| } |
| |
| /** |
| * mpt3sas_base_put_smid_default - Default, primarily used for config pages |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| Mpi2RequestDescriptorUnion_t descriptor; |
| u64 *request = (u64 *)&descriptor; |
| |
| descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; |
| descriptor.Default.MSIxIndex = _base_get_msix_index(ioc); |
| descriptor.Default.SMID = cpu_to_le16(smid); |
| descriptor.Default.LMID = 0; |
| descriptor.Default.DescriptorTypeDependent = 0; |
| _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| } |
| |
| /** |
| * _base_display_intel_branding - Display branding string |
| * @ioc: per adapter object |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_display_intel_branding(struct MPT3SAS_ADAPTER *ioc) |
| { |
| if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL) |
| return; |
| |
| switch (ioc->pdev->device) { |
| case MPI25_MFGPAGE_DEVID_SAS3008: |
| switch (ioc->pdev->subsystem_device) { |
| case MPT3SAS_INTEL_RMS3JC080_SSDID: |
| pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| MPT3SAS_INTEL_RMS3JC080_BRANDING); |
| break; |
| |
| case MPT3SAS_INTEL_RS3GC008_SSDID: |
| pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| MPT3SAS_INTEL_RS3GC008_BRANDING); |
| break; |
| case MPT3SAS_INTEL_RS3FC044_SSDID: |
| pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| MPT3SAS_INTEL_RS3FC044_BRANDING); |
| break; |
| case MPT3SAS_INTEL_RS3UC080_SSDID: |
| pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| MPT3SAS_INTEL_RS3UC080_BRANDING); |
| break; |
| default: |
| pr_info(MPT3SAS_FMT |
| "Intel(R) Controller: Subsystem ID: 0x%X\n", |
| ioc->name, ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| default: |
| pr_info(MPT3SAS_FMT |
| "Intel(R) Controller: Subsystem ID: 0x%X\n", |
| ioc->name, ioc->pdev->subsystem_device); |
| break; |
| } |
| } |
| |
| |
| |
| /** |
| * _base_display_ioc_capabilities - Disply IOC's capabilities. |
| * @ioc: per adapter object |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int i = 0; |
| char desc[16]; |
| u32 iounit_pg1_flags; |
| u32 bios_version; |
| |
| bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); |
| strncpy(desc, ioc->manu_pg0.ChipName, 16); |
| pr_info(MPT3SAS_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "\ |
| "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n", |
| ioc->name, desc, |
| (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, |
| (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, |
| (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, |
| ioc->facts.FWVersion.Word & 0x000000FF, |
| ioc->pdev->revision, |
| (bios_version & 0xFF000000) >> 24, |
| (bios_version & 0x00FF0000) >> 16, |
| (bios_version & 0x0000FF00) >> 8, |
| bios_version & 0x000000FF); |
| |
| _base_display_intel_branding(ioc); |
| |
| pr_info(MPT3SAS_FMT "Protocol=(", ioc->name); |
| |
| if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) { |
| pr_info("Initiator"); |
| i++; |
| } |
| |
| if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) { |
| pr_info("%sTarget", i ? "," : ""); |
| i++; |
| } |
| |
| i = 0; |
| pr_info("), "); |
| pr_info("Capabilities=("); |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { |
| pr_info("Raid"); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { |
| pr_info("%sTLR", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) { |
| pr_info("%sMulticast", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) { |
| pr_info("%sBIDI Target", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) { |
| pr_info("%sEEDP", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) { |
| pr_info("%sSnapshot Buffer", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) { |
| pr_info("%sDiag Trace Buffer", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) { |
| pr_info("%sDiag Extended Buffer", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) { |
| pr_info("%sTask Set Full", i ? "," : ""); |
| i++; |
| } |
| |
| iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); |
| if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) { |
| pr_info("%sNCQ", i ? "," : ""); |
| i++; |
| } |
| |
| pr_info(")\n"); |
| } |
| |
| /** |
| * mpt3sas_base_update_missing_delay - change the missing delay timers |
| * @ioc: per adapter object |
| * @device_missing_delay: amount of time till device is reported missing |
| * @io_missing_delay: interval IO is returned when there is a missing device |
| * |
| * Return nothing. |
| * |
| * Passed on the command line, this function will modify the device missing |
| * delay, as well as the io missing delay. This should be called at driver |
| * load time. |
| */ |
| void |
| mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, |
| u16 device_missing_delay, u8 io_missing_delay) |
| { |
| u16 dmd, dmd_new, dmd_orignal; |
| u8 io_missing_delay_original; |
| u16 sz; |
| Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; |
| Mpi2ConfigReply_t mpi_reply; |
| u8 num_phys = 0; |
| u16 ioc_status; |
| |
| mpt3sas_config_get_number_hba_phys(ioc, &num_phys); |
| if (!num_phys) |
| return; |
| |
| sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys * |
| sizeof(Mpi2SasIOUnit1PhyData_t)); |
| sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); |
| if (!sas_iounit_pg1) { |
| pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", |
| ioc->name, __FILE__, __LINE__, __func__); |
| goto out; |
| } |
| if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, |
| sas_iounit_pg1, sz))) { |
| pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", |
| ioc->name, __FILE__, __LINE__, __func__); |
| goto out; |
| } |
| ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & |
| MPI2_IOCSTATUS_MASK; |
| if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { |
| pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", |
| ioc->name, __FILE__, __LINE__, __func__); |
| goto out; |
| } |
| |
| /* device missing delay */ |
| dmd = sas_iounit_pg1->ReportDeviceMissingDelay; |
| if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) |
| dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; |
| else |
| dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; |
| dmd_orignal = dmd; |
| if (device_missing_delay > 0x7F) { |
| dmd = (device_missing_delay > 0x7F0) ? 0x7F0 : |
| device_missing_delay; |
| dmd = dmd / 16; |
| dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16; |
| } else |
| dmd = device_missing_delay; |
| sas_iounit_pg1->ReportDeviceMissingDelay = dmd; |
| |
| /* io missing delay */ |
| io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay; |
| sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay; |
| |
| if (!mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, |
| sz)) { |
| if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) |
| dmd_new = (dmd & |
| MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; |
| else |
| dmd_new = |
| dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; |
| pr_info(MPT3SAS_FMT "device_missing_delay: old(%d), new(%d)\n", |
| ioc->name, dmd_orignal, dmd_new); |
| pr_info(MPT3SAS_FMT "ioc_missing_delay: old(%d), new(%d)\n", |
| ioc->name, io_missing_delay_original, |
| io_missing_delay); |
| ioc->device_missing_delay = dmd_new; |
| ioc->io_missing_delay = io_missing_delay; |
| } |
| |
| out: |
| kfree(sas_iounit_pg1); |
| } |
| /** |
| * _base_static_config_pages - static start of day config pages |
| * @ioc: per adapter object |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) |
| { |
| Mpi2ConfigReply_t mpi_reply; |
| u32 iounit_pg1_flags; |
| |
| mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); |
| if (ioc->ir_firmware) |
| mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply, |
| &ioc->manu_pg10); |
| |
| /* |
| * Ensure correct T10 PI operation if vendor left EEDPTagMode |
| * flag unset in NVDATA. |
| */ |
| mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11); |
| if (ioc->manu_pg11.EEDPTagMode == 0) { |
| pr_err("%s: overriding NVDATA EEDPTagMode setting\n", |
| ioc->name); |
| ioc->manu_pg11.EEDPTagMode &= ~0x3; |
| ioc->manu_pg11.EEDPTagMode |= 0x1; |
| mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply, |
| &ioc->manu_pg11); |
| } |
| |
| mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); |
| mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); |
| mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); |
| mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); |
| mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); |
| mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8); |
| _base_display_ioc_capabilities(ioc); |
| |
| /* |
| * Enable task_set_full handling in iounit_pg1 when the |
| * facts capabilities indicate that its supported. |
| */ |
| iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); |
| if ((ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING)) |
| iounit_pg1_flags &= |
| ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; |
| else |
| iounit_pg1_flags |= |
| MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; |
| ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); |
| mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); |
| |
| if (ioc->iounit_pg8.NumSensors) |
| ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors; |
| } |
| |
| /** |
| * _base_release_memory_pools - release memory |
| * @ioc: per adapter object |
| * |
| * Free memory allocated from _base_allocate_memory_pools. |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int i = 0; |
| struct reply_post_struct *rps; |
| |
| dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| if (ioc->request) { |
| pci_free_consistent(ioc->pdev, ioc->request_dma_sz, |
| ioc->request, ioc->request_dma); |
| dexitprintk(ioc, pr_info(MPT3SAS_FMT |
| "request_pool(0x%p): free\n", |
| ioc->name, ioc->request)); |
| ioc->request = NULL; |
| } |
| |
| if (ioc->sense) { |
| pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma); |
| if (ioc->sense_dma_pool) |
| pci_pool_destroy(ioc->sense_dma_pool); |
| dexitprintk(ioc, pr_info(MPT3SAS_FMT |
| "sense_pool(0x%p): free\n", |
| ioc->name, ioc->sense)); |
| ioc->sense = NULL; |
| } |
| |
| if (ioc->reply) { |
| pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma); |
| if (ioc->reply_dma_pool) |
| pci_pool_destroy(ioc->reply_dma_pool); |
| dexitprintk(ioc, pr_info(MPT3SAS_FMT |
| "reply_pool(0x%p): free\n", |
| ioc->name, ioc->reply)); |
| ioc->reply = NULL; |
| } |
| |
| if (ioc->reply_free) { |
| pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free, |
| ioc->reply_free_dma); |
| if (ioc->reply_free_dma_pool) |
| pci_pool_destroy(ioc->reply_free_dma_pool); |
| dexitprintk(ioc, pr_info(MPT3SAS_FMT |
| "reply_free_pool(0x%p): free\n", |
| ioc->name, ioc->reply_free)); |
| ioc->reply_free = NULL; |
| } |
| |
| if (ioc->reply_post) { |
| do { |
| rps = &ioc->reply_post[i]; |
| if (rps->reply_post_free) { |
| pci_pool_free( |
| ioc->reply_post_free_dma_pool, |
| rps->reply_post_free, |
| rps->reply_post_free_dma); |
| dexitprintk(ioc, pr_info(MPT3SAS_FMT |
| "reply_post_free_pool(0x%p): free\n", |
| ioc->name, rps->reply_post_free)); |
| rps->reply_post_free = NULL; |
| } |
| } while (ioc->rdpq_array_enable && |
| (++i < ioc->reply_queue_count)); |
| |
| if (ioc->reply_post_free_dma_pool) |
| pci_pool_destroy(ioc->reply_post_free_dma_pool); |
| kfree(ioc->reply_post); |
| } |
| |
| if (ioc->config_page) { |
| dexitprintk(ioc, pr_info(MPT3SAS_FMT |
| "config_page(0x%p): free\n", ioc->name, |
| ioc->config_page)); |
| pci_free_consistent(ioc->pdev, ioc->config_page_sz, |
| ioc->config_page, ioc->config_page_dma); |
| } |
| |
| if (ioc->scsi_lookup) { |
| free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages); |
| ioc->scsi_lookup = NULL; |
| } |
| kfree(ioc->hpr_lookup); |
| kfree(ioc->internal_lookup); |
| if (ioc->chain_lookup) { |
| for (i = 0; i < ioc->chain_depth; i++) { |
| if (ioc->chain_lookup[i].chain_buffer) |
| pci_pool_free(ioc->chain_dma_pool, |
| ioc->chain_lookup[i].chain_buffer, |
| ioc->chain_lookup[i].chain_buffer_dma); |
| } |
| if (ioc->chain_dma_pool) |
| pci_pool_destroy(ioc->chain_dma_pool); |
| free_pages((ulong)ioc->chain_lookup, ioc->chain_pages); |
| ioc->chain_lookup = NULL; |
| } |
| } |
| |
| /** |
| * _base_allocate_memory_pools - allocate start of day memory pools |
| * @ioc: per adapter object |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 success, anything else error |
| */ |
| static int |
| _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) |
| { |
| struct mpt3sas_facts *facts; |
| u16 max_sge_elements; |
| u16 chains_needed_per_io; |
| u32 sz, total_sz, reply_post_free_sz; |
| u32 retry_sz; |
| u16 max_request_credit; |
| unsigned short sg_tablesize; |
| u16 sge_size; |
| int i; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| |
| retry_sz = 0; |
| facts = &ioc->facts; |
| |
| /* command line tunables for max sgl entries */ |
| if (max_sgl_entries != -1) |
| sg_tablesize = max_sgl_entries; |
| else |
| sg_tablesize = MPT3SAS_SG_DEPTH; |
| |
| if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS) |
| sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS; |
| else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) { |
| sg_tablesize = min_t(unsigned short, sg_tablesize, |
| SCSI_MAX_SG_CHAIN_SEGMENTS); |
| pr_warn(MPT3SAS_FMT |
| "sg_tablesize(%u) is bigger than kernel" |
| " defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name, |
| sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS); |
| } |
| ioc->shost->sg_tablesize = sg_tablesize; |
| |
| ioc->hi_priority_depth = facts->HighPriorityCredit; |
| ioc->internal_depth = ioc->hi_priority_depth + (5); |
| /* command line tunables for max controller queue depth */ |
| if (max_queue_depth != -1 && max_queue_depth != 0) { |
| max_request_credit = min_t(u16, max_queue_depth + |
| ioc->hi_priority_depth + ioc->internal_depth, |
| facts->RequestCredit); |
| if (max_request_credit > MAX_HBA_QUEUE_DEPTH) |
| max_request_credit = MAX_HBA_QUEUE_DEPTH; |
| } else |
| max_request_credit = min_t(u16, facts->RequestCredit, |
| MAX_HBA_QUEUE_DEPTH); |
| |
| ioc->hba_queue_depth = max_request_credit; |
| |
| /* request frame size */ |
| ioc->request_sz = facts->IOCRequestFrameSize * 4; |
| |
| /* reply frame size */ |
| ioc->reply_sz = facts->ReplyFrameSize * 4; |
| |
| /* calculate the max scatter element size */ |
| sge_size = max_t(u16, ioc->sge_size, ioc->sge_size_ieee); |
| |
| retry_allocation: |
| total_sz = 0; |
| /* calculate number of sg elements left over in the 1st frame */ |
| max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) - |
| sizeof(Mpi2SGEIOUnion_t)) + sge_size); |
| ioc->max_sges_in_main_message = max_sge_elements/sge_size; |
| |
| /* now do the same for a chain buffer */ |
| max_sge_elements = ioc->request_sz - sge_size; |
| ioc->max_sges_in_chain_message = max_sge_elements/sge_size; |
| |
| /* |
| * MPT3SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE |
| */ |
| chains_needed_per_io = ((ioc->shost->sg_tablesize - |
| ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message) |
| + 1; |
| if (chains_needed_per_io > facts->MaxChainDepth) { |
| chains_needed_per_io = facts->MaxChainDepth; |
| ioc->shost->sg_tablesize = min_t(u16, |
| ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message |
| * chains_needed_per_io), ioc->shost->sg_tablesize); |
| } |
| ioc->chains_needed_per_io = chains_needed_per_io; |
| |
| /* reply free queue sizing - taking into account for 64 FW events */ |
| ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64; |
| |
| /* calculate reply descriptor post queue depth */ |
| ioc->reply_post_queue_depth = ioc->hba_queue_depth + |
| ioc->reply_free_queue_depth + 1 ; |
| /* align the reply post queue on the next 16 count boundary */ |
| if (ioc->reply_post_queue_depth % 16) |
| ioc->reply_post_queue_depth += 16 - |
| (ioc->reply_post_queue_depth % 16); |
| |
| |
| if (ioc->reply_post_queue_depth > |
| facts->MaxReplyDescriptorPostQueueDepth) { |
| ioc->reply_post_queue_depth = |
| facts->MaxReplyDescriptorPostQueueDepth - |
| (facts->MaxReplyDescriptorPostQueueDepth % 16); |
| ioc->hba_queue_depth = |
| ((ioc->reply_post_queue_depth - 64) / 2) - 1; |
| ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64; |
| } |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "scatter gather: " \ |
| "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), " |
| "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message, |
| ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize, |
| ioc->chains_needed_per_io)); |
| |
| /* reply post queue, 16 byte align */ |
| reply_post_free_sz = ioc->reply_post_queue_depth * |
| sizeof(Mpi2DefaultReplyDescriptor_t); |
| |
| sz = reply_post_free_sz; |
| if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable) |
| sz *= ioc->reply_queue_count; |
| |
| ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ? |
| (ioc->reply_queue_count):1, |
| sizeof(struct reply_post_struct), GFP_KERNEL); |
| |
| if (!ioc->reply_post) { |
| pr_err(MPT3SAS_FMT "reply_post_free pool: kcalloc failed\n", |
| ioc->name); |
| goto out; |
| } |
| ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool", |
| ioc->pdev, sz, 16, 0); |
| if (!ioc->reply_post_free_dma_pool) { |
| pr_err(MPT3SAS_FMT |
| "reply_post_free pool: pci_pool_create failed\n", |
| ioc->name); |
| goto out; |
| } |
| i = 0; |
| do { |
| ioc->reply_post[i].reply_post_free = |
| pci_pool_alloc(ioc->reply_post_free_dma_pool, |
| GFP_KERNEL, |
| &ioc->reply_post[i].reply_post_free_dma); |
| if (!ioc->reply_post[i].reply_post_free) { |
| pr_err(MPT3SAS_FMT |
| "reply_post_free pool: pci_pool_alloc failed\n", |
| ioc->name); |
| goto out; |
| } |
| memset(ioc->reply_post[i].reply_post_free, 0, sz); |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "reply post free pool (0x%p): depth(%d)," |
| "element_size(%d), pool_size(%d kB)\n", ioc->name, |
| ioc->reply_post[i].reply_post_free, |
| ioc->reply_post_queue_depth, 8, sz/1024)); |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "reply_post_free_dma = (0x%llx)\n", ioc->name, |
| (unsigned long long) |
| ioc->reply_post[i].reply_post_free_dma)); |
| total_sz += sz; |
| } while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count)); |
| |
| if (ioc->dma_mask == 64) { |
| if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) { |
| pr_warn(MPT3SAS_FMT |
| "no suitable consistent DMA mask for %s\n", |
| ioc->name, pci_name(ioc->pdev)); |
| goto out; |
| } |
| } |
| |
| ioc->scsiio_depth = ioc->hba_queue_depth - |
| ioc->hi_priority_depth - ioc->internal_depth; |
| |
| /* set the scsi host can_queue depth |
| * with some internal commands that could be outstanding |
| */ |
| ioc->shost->can_queue = ioc->scsiio_depth; |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "scsi host: can_queue depth (%d)\n", |
| ioc->name, ioc->shost->can_queue)); |
| |
| |
| /* contiguous pool for request and chains, 16 byte align, one extra " |
| * "frame for smid=0 |
| */ |
| ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth; |
| sz = ((ioc->scsiio_depth + 1) * ioc->request_sz); |
| |
| /* hi-priority queue */ |
| sz += (ioc->hi_priority_depth * ioc->request_sz); |
| |
| /* internal queue */ |
| sz += (ioc->internal_depth * ioc->request_sz); |
| |
| ioc->request_dma_sz = sz; |
| ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma); |
| if (!ioc->request) { |
| pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \ |
| "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), " |
| "total(%d kB)\n", ioc->name, ioc->hba_queue_depth, |
| ioc->chains_needed_per_io, ioc->request_sz, sz/1024); |
| if (ioc->scsiio_depth < MPT3SAS_SAS_QUEUE_DEPTH) |
| goto out; |
| retry_sz += 64; |
| ioc->hba_queue_depth = max_request_credit - retry_sz; |
| goto retry_allocation; |
| } |
| |
| if (retry_sz) |
| pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \ |
| "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), " |
| "total(%d kb)\n", ioc->name, ioc->hba_queue_depth, |
| ioc->chains_needed_per_io, ioc->request_sz, sz/1024); |
| |
| /* hi-priority queue */ |
| ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) * |
| ioc->request_sz); |
| ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) * |
| ioc->request_sz); |
| |
| /* internal queue */ |
| ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth * |
| ioc->request_sz); |
| ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth * |
| ioc->request_sz); |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "request pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n", |
| ioc->name, ioc->request, ioc->hba_queue_depth, ioc->request_sz, |
| (ioc->hba_queue_depth * ioc->request_sz)/1024)); |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "request pool: dma(0x%llx)\n", |
| ioc->name, (unsigned long long) ioc->request_dma)); |
| total_sz += sz; |
| |
| sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker); |
| ioc->scsi_lookup_pages = get_order(sz); |
| ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages( |
| GFP_KERNEL, ioc->scsi_lookup_pages); |
| if (!ioc->scsi_lookup) { |
| pr_err(MPT3SAS_FMT "scsi_lookup: get_free_pages failed, sz(%d)\n", |
| ioc->name, (int)sz); |
| goto out; |
| } |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "scsiio(0x%p): depth(%d)\n", |
| ioc->name, ioc->request, ioc->scsiio_depth)); |
| |
| ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH); |
| sz = ioc->chain_depth * sizeof(struct chain_tracker); |
| ioc->chain_pages = get_order(sz); |
| ioc->chain_lookup = (struct chain_tracker *)__get_free_pages( |
| GFP_KERNEL, ioc->chain_pages); |
| if (!ioc->chain_lookup) { |
| pr_err(MPT3SAS_FMT "chain_lookup: __get_free_pages failed\n", |
| ioc->name); |
| goto out; |
| } |
| ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev, |
| ioc->request_sz, 16, 0); |
| if (!ioc->chain_dma_pool) { |
| pr_err(MPT3SAS_FMT "chain_dma_pool: pci_pool_create failed\n", |
| ioc->name); |
| goto out; |
| } |
| for (i = 0; i < ioc->chain_depth; i++) { |
| ioc->chain_lookup[i].chain_buffer = pci_pool_alloc( |
| ioc->chain_dma_pool , GFP_KERNEL, |
| &ioc->chain_lookup[i].chain_buffer_dma); |
| if (!ioc->chain_lookup[i].chain_buffer) { |
| ioc->chain_depth = i; |
| goto chain_done; |
| } |
| total_sz += ioc->request_sz; |
| } |
| chain_done: |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n", |
| ioc->name, ioc->chain_depth, ioc->request_sz, |
| ((ioc->chain_depth * ioc->request_sz))/1024)); |
| |
| /* initialize hi-priority queue smid's */ |
| ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth, |
| sizeof(struct request_tracker), GFP_KERNEL); |
| if (!ioc->hpr_lookup) { |
| pr_err(MPT3SAS_FMT "hpr_lookup: kcalloc failed\n", |
| ioc->name); |
| goto out; |
| } |
| ioc->hi_priority_smid = ioc->scsiio_depth + 1; |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "hi_priority(0x%p): depth(%d), start smid(%d)\n", |
| ioc->name, ioc->hi_priority, |
| ioc->hi_priority_depth, ioc->hi_priority_smid)); |
| |
| /* initialize internal queue smid's */ |
| ioc->internal_lookup = kcalloc(ioc->internal_depth, |
| sizeof(struct request_tracker), GFP_KERNEL); |
| if (!ioc->internal_lookup) { |
| pr_err(MPT3SAS_FMT "internal_lookup: kcalloc failed\n", |
| ioc->name); |
| goto out; |
| } |
| ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth; |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "internal(0x%p): depth(%d), start smid(%d)\n", |
| ioc->name, ioc->internal, |
| ioc->internal_depth, ioc->internal_smid)); |
| |
| /* sense buffers, 4 byte align */ |
| sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE; |
| ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4, |
| 0); |
| if (!ioc->sense_dma_pool) { |
| pr_err(MPT3SAS_FMT "sense pool: pci_pool_create failed\n", |
| ioc->name); |
| goto out; |
| } |
| ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL, |
| &ioc->sense_dma); |
| if (!ioc->sense) { |
| pr_err(MPT3SAS_FMT "sense pool: pci_pool_alloc failed\n", |
| ioc->name); |
| goto out; |
| } |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "sense pool(0x%p): depth(%d), element_size(%d), pool_size" |
| "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth, |
| SCSI_SENSE_BUFFERSIZE, sz/1024)); |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "sense_dma(0x%llx)\n", |
| ioc->name, (unsigned long long)ioc->sense_dma)); |
| total_sz += sz; |
| |
| /* reply pool, 4 byte align */ |
| sz = ioc->reply_free_queue_depth * ioc->reply_sz; |
| ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4, |
| 0); |
| if (!ioc->reply_dma_pool) { |
| pr_err(MPT3SAS_FMT "reply pool: pci_pool_create failed\n", |
| ioc->name); |
| goto out; |
| } |
| ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL, |
| &ioc->reply_dma); |
| if (!ioc->reply) { |
| pr_err(MPT3SAS_FMT "reply pool: pci_pool_alloc failed\n", |
| ioc->name); |
| goto out; |
| } |
| ioc->reply_dma_min_address = (u32)(ioc->reply_dma); |
| ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz; |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "reply pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n", |
| ioc->name, ioc->reply, |
| ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024)); |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_dma(0x%llx)\n", |
| ioc->name, (unsigned long long)ioc->reply_dma)); |
| total_sz += sz; |
| |
| /* reply free queue, 16 byte align */ |
| sz = ioc->reply_free_queue_depth * 4; |
| ioc->reply_free_dma_pool = pci_pool_create("reply_free pool", |
| ioc->pdev, sz, 16, 0); |
| if (!ioc->reply_free_dma_pool) { |
| pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_create failed\n", |
| ioc->name); |
| goto out; |
| } |
| ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL, |
| &ioc->reply_free_dma); |
| if (!ioc->reply_free) { |
| pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_alloc failed\n", |
| ioc->name); |
| goto out; |
| } |
| memset(ioc->reply_free, 0, sz); |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_free pool(0x%p): " \ |
| "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name, |
| ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024)); |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "reply_free_dma (0x%llx)\n", |
| ioc->name, (unsigned long long)ioc->reply_free_dma)); |
| total_sz += sz; |
| |
| ioc->config_page_sz = 512; |
| ioc->config_page = pci_alloc_consistent(ioc->pdev, |
| ioc->config_page_sz, &ioc->config_page_dma); |
| if (!ioc->config_page) { |
| pr_err(MPT3SAS_FMT |
| "config page: pci_pool_alloc failed\n", |
| ioc->name); |
| goto out; |
| } |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "config page(0x%p): size(%d)\n", |
| ioc->name, ioc->config_page, ioc->config_page_sz)); |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "config_page_dma(0x%llx)\n", |
| ioc->name, (unsigned long long)ioc->config_page_dma)); |
| total_sz += ioc->config_page_sz; |
| |
| pr_info(MPT3SAS_FMT "Allocated physical memory: size(%d kB)\n", |
| ioc->name, total_sz/1024); |
| pr_info(MPT3SAS_FMT |
| "Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n", |
| ioc->name, ioc->shost->can_queue, facts->RequestCredit); |
| pr_info(MPT3SAS_FMT "Scatter Gather Elements per IO(%d)\n", |
| ioc->name, ioc->shost->sg_tablesize); |
| return 0; |
| |
| out: |
| return -ENOMEM; |
| } |
| |
| /** |
| * mpt3sas_base_get_iocstate - Get the current state of a MPT adapter. |
| * @ioc: Pointer to MPT_ADAPTER structure |
| * @cooked: Request raw or cooked IOC state |
| * |
| * Returns all IOC Doorbell register bits if cooked==0, else just the |
| * Doorbell bits in MPI_IOC_STATE_MASK. |
| */ |
| u32 |
| mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked) |
| { |
| u32 s, sc; |
| |
| s = readl(&ioc->chip->Doorbell); |
| sc = s & MPI2_IOC_STATE_MASK; |
| return cooked ? sc : s; |
| } |
| |
| /** |
| * _base_wait_on_iocstate - waiting on a particular ioc state |
| * @ioc_state: controller state { READY, OPERATIONAL, or RESET } |
| * @timeout: timeout in second |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout, |
| int sleep_flag) |
| { |
| u32 count, cntdn; |
| u32 current_state; |
| |
| count = 0; |
| cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; |
| do { |
| current_state = mpt3sas_base_get_iocstate(ioc, 1); |
| if (current_state == ioc_state) |
| return 0; |
| if (count && current_state == MPI2_IOC_STATE_FAULT) |
| break; |
| if (sleep_flag == CAN_SLEEP) |
| usleep_range(1000, 1500); |
| else |
| udelay(500); |
| count++; |
| } while (--cntdn); |
| |
| return current_state; |
| } |
| |
| /** |
| * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by |
| * a write to the doorbell) |
| * @ioc: per adapter object |
| * @timeout: timeout in second |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| * |
| * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell. |
| */ |
| static int |
| _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout, |
| int sleep_flag) |
| { |
| u32 cntdn, count; |
| u32 int_status; |
| |
| count = 0; |
| cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; |
| do { |
| int_status = readl(&ioc->chip->HostInterruptStatus); |
| if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { |
| dhsprintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: successful count(%d), timeout(%d)\n", |
| ioc->name, __func__, count, timeout)); |
| return 0; |
| } |
| if (sleep_flag == CAN_SLEEP) |
| usleep_range(1000, 1500); |
| else |
| udelay(500); |
| count++; |
| } while (--cntdn); |
| |
| pr_err(MPT3SAS_FMT |
| "%s: failed due to timeout count(%d), int_status(%x)!\n", |
| ioc->name, __func__, count, int_status); |
| return -EFAULT; |
| } |
| |
| /** |
| * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell. |
| * @ioc: per adapter object |
| * @timeout: timeout in second |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| * |
| * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to |
| * doorbell. |
| */ |
| static int |
| _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout, |
| int sleep_flag) |
| { |
| u32 cntdn, count; |
| u32 int_status; |
| u32 doorbell; |
| |
| count = 0; |
| cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; |
| do { |
| int_status = readl(&ioc->chip->HostInterruptStatus); |
| if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { |
| dhsprintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: successful count(%d), timeout(%d)\n", |
| ioc->name, __func__, count, timeout)); |
| return 0; |
| } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { |
| doorbell = readl(&ioc->chip->Doorbell); |
| if ((doorbell & MPI2_IOC_STATE_MASK) == |
| MPI2_IOC_STATE_FAULT) { |
| mpt3sas_base_fault_info(ioc , doorbell); |
| return -EFAULT; |
| } |
| } else if (int_status == 0xFFFFFFFF) |
| goto out; |
| |
| if (sleep_flag == CAN_SLEEP) |
| usleep_range(1000, 1500); |
| else |
| udelay(500); |
| count++; |
| } while (--cntdn); |
| |
| out: |
| pr_err(MPT3SAS_FMT |
| "%s: failed due to timeout count(%d), int_status(%x)!\n", |
| ioc->name, __func__, count, int_status); |
| return -EFAULT; |
| } |
| |
| /** |
| * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use |
| * @ioc: per adapter object |
| * @timeout: timeout in second |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| * |
| */ |
| static int |
| _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout, |
| int sleep_flag) |
| { |
| u32 cntdn, count; |
| u32 doorbell_reg; |
| |
| count = 0; |
| cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; |
| do { |
| doorbell_reg = readl(&ioc->chip->Doorbell); |
| if (!(doorbell_reg & MPI2_DOORBELL_USED)) { |
| dhsprintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: successful count(%d), timeout(%d)\n", |
| ioc->name, __func__, count, timeout)); |
| return 0; |
| } |
| if (sleep_flag == CAN_SLEEP) |
| usleep_range(1000, 1500); |
| else |
| udelay(500); |
| count++; |
| } while (--cntdn); |
| |
| pr_err(MPT3SAS_FMT |
| "%s: failed due to timeout count(%d), doorbell_reg(%x)!\n", |
| ioc->name, __func__, count, doorbell_reg); |
| return -EFAULT; |
| } |
| |
| /** |
| * _base_send_ioc_reset - send doorbell reset |
| * @ioc: per adapter object |
| * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET |
| * @timeout: timeout in second |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout, |
| int sleep_flag) |
| { |
| u32 ioc_state; |
| int r = 0; |
| |
| if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) { |
| pr_err(MPT3SAS_FMT "%s: unknown reset_type\n", |
| ioc->name, __func__); |
| return -EFAULT; |
| } |
| |
| if (!(ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY)) |
| return -EFAULT; |
| |
| pr_info(MPT3SAS_FMT "sending message unit reset !!\n", ioc->name); |
| |
| writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT, |
| &ioc->chip->Doorbell); |
| if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) { |
| r = -EFAULT; |
| goto out; |
| } |
| ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, |
| timeout, sleep_flag); |
| if (ioc_state) { |
| pr_err(MPT3SAS_FMT |
| "%s: failed going to ready state (ioc_state=0x%x)\n", |
| ioc->name, __func__, ioc_state); |
| r = -EFAULT; |
| goto out; |
| } |
| out: |
| pr_info(MPT3SAS_FMT "message unit reset: %s\n", |
| ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); |
| return r; |
| } |
| |
| /** |
| * _base_handshake_req_reply_wait - send request thru doorbell interface |
| * @ioc: per adapter object |
| * @request_bytes: request length |
| * @request: pointer having request payload |
| * @reply_bytes: reply length |
| * @reply: pointer to reply payload |
| * @timeout: timeout in second |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, |
| u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag) |
| { |
| MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply; |
| int i; |
| u8 failed; |
| u16 dummy; |
| __le32 *mfp; |
| |
| /* make sure doorbell is not in use */ |
| if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { |
| pr_err(MPT3SAS_FMT |
| "doorbell is in use (line=%d)\n", |
| ioc->name, __LINE__); |
| return -EFAULT; |
| } |
| |
| /* clear pending doorbell interrupts from previous state changes */ |
| if (readl(&ioc->chip->HostInterruptStatus) & |
| MPI2_HIS_IOC2SYS_DB_STATUS) |
| writel(0, &ioc->chip->HostInterruptStatus); |
| |
| /* send message to ioc */ |
| writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) | |
| ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)), |
| &ioc->chip->Doorbell); |
| |
| if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) { |
| pr_err(MPT3SAS_FMT |
| "doorbell handshake int failed (line=%d)\n", |
| ioc->name, __LINE__); |
| return -EFAULT; |
| } |
| writel(0, &ioc->chip->HostInterruptStatus); |
| |
| if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) { |
| pr_err(MPT3SAS_FMT |
| "doorbell handshake ack failed (line=%d)\n", |
| ioc->name, __LINE__); |
| return -EFAULT; |
| } |
| |
| /* send message 32-bits at a time */ |
| for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) { |
| writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell); |
| if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) |
| failed = 1; |
| } |
| |
| if (failed) { |
| pr_err(MPT3SAS_FMT |
| "doorbell handshake sending request failed (line=%d)\n", |
| ioc->name, __LINE__); |
| return -EFAULT; |
| } |
| |
| /* now wait for the reply */ |
| if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) { |
| pr_err(MPT3SAS_FMT |
| "doorbell handshake int failed (line=%d)\n", |
| ioc->name, __LINE__); |
| return -EFAULT; |
| } |
| |
| /* read the first two 16-bits, it gives the total length of the reply */ |
| reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell) |
| & MPI2_DOORBELL_DATA_MASK); |
| writel(0, &ioc->chip->HostInterruptStatus); |
| if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { |
| pr_err(MPT3SAS_FMT |
| "doorbell handshake int failed (line=%d)\n", |
| ioc->name, __LINE__); |
| return -EFAULT; |
| } |
| reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell) |
| & MPI2_DOORBELL_DATA_MASK); |
| writel(0, &ioc->chip->HostInterruptStatus); |
| |
| for (i = 2; i < default_reply->MsgLength * 2; i++) { |
| if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { |
| pr_err(MPT3SAS_FMT |
| "doorbell handshake int failed (line=%d)\n", |
| ioc->name, __LINE__); |
| return -EFAULT; |
| } |
| if (i >= reply_bytes/2) /* overflow case */ |
| dummy = readl(&ioc->chip->Doorbell); |
| else |
| reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell) |
| & MPI2_DOORBELL_DATA_MASK); |
| writel(0, &ioc->chip->HostInterruptStatus); |
| } |
| |
| _base_wait_for_doorbell_int(ioc, 5, sleep_flag); |
| if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) { |
| dhsprintk(ioc, pr_info(MPT3SAS_FMT |
| "doorbell is in use (line=%d)\n", ioc->name, __LINE__)); |
| } |
| writel(0, &ioc->chip->HostInterruptStatus); |
| |
| if (ioc->logging_level & MPT_DEBUG_INIT) { |
| mfp = (__le32 *)reply; |
| pr_info("\toffset:data\n"); |
| for (i = 0; i < reply_bytes/4; i++) |
| pr_info("\t[0x%02x]:%08x\n", i*4, |
| le32_to_cpu(mfp[i])); |
| } |
| return 0; |
| } |
| |
| /** |
| * mpt3sas_base_sas_iounit_control - send sas iounit control to FW |
| * @ioc: per adapter object |
| * @mpi_reply: the reply payload from FW |
| * @mpi_request: the request payload sent to FW |
| * |
| * The SAS IO Unit Control Request message allows the host to perform low-level |
| * operations, such as resets on the PHYs of the IO Unit, also allows the host |
| * to obtain the IOC assigned device handles for a device if it has other |
| * identifying information about the device, in addition allows the host to |
| * remove IOC resources associated with the device. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc, |
| Mpi2SasIoUnitControlReply_t *mpi_reply, |
| Mpi2SasIoUnitControlRequest_t *mpi_request) |
| { |
| u16 smid; |
| u32 ioc_state; |
| unsigned long timeleft; |
| bool issue_reset = false; |
| int rc; |
| void *request; |
| u16 wait_state_count; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| mutex_lock(&ioc->base_cmds.mutex); |
| |
| if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) { |
| pr_err(MPT3SAS_FMT "%s: base_cmd in use\n", |
| ioc->name, __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| wait_state_count = 0; |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 1); |
| while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { |
| if (wait_state_count++ == 10) { |
| pr_err(MPT3SAS_FMT |
| "%s: failed due to ioc not operational\n", |
| ioc->name, __func__); |
| rc = -EFAULT; |
| goto out; |
| } |
| ssleep(1); |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 1); |
| pr_info(MPT3SAS_FMT |
| "%s: waiting for operational state(count=%d)\n", |
| ioc->name, __func__, wait_state_count); |
| } |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); |
| if (!smid) { |
| pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| rc = 0; |
| ioc->base_cmds.status = MPT3_CMD_PENDING; |
| request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->base_cmds.smid = smid; |
| memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)); |
| if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || |
| mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) |
| ioc->ioc_link_reset_in_progress = 1; |
| init_completion(&ioc->base_cmds.done); |
| mpt3sas_base_put_smid_default(ioc, smid); |
| timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, |
| msecs_to_jiffies(10000)); |
| if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || |
| mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) && |
| ioc->ioc_link_reset_in_progress) |
| ioc->ioc_link_reset_in_progress = 0; |
| if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { |
| pr_err(MPT3SAS_FMT "%s: timeout\n", |
| ioc->name, __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi2SasIoUnitControlRequest_t)/4); |
| if (!(ioc->base_cmds.status & MPT3_CMD_RESET)) |
| issue_reset = true; |
| goto issue_host_reset; |
| } |
| if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) |
| memcpy(mpi_reply, ioc->base_cmds.reply, |
| sizeof(Mpi2SasIoUnitControlReply_t)); |
| else |
| memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t)); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| goto out; |
| |
| issue_host_reset: |
| if (issue_reset) |
| mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
| FORCE_BIG_HAMMER); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| rc = -EFAULT; |
| out: |
| mutex_unlock(&ioc->base_cmds.mutex); |
| return rc; |
| } |
| |
| /** |
| * mpt3sas_base_scsi_enclosure_processor - sending request to sep device |
| * @ioc: per adapter object |
| * @mpi_reply: the reply payload from FW |
| * @mpi_request: the request payload sent to FW |
| * |
| * The SCSI Enclosure Processor request message causes the IOC to |
| * communicate with SES devices to control LED status signals. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc, |
| Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request) |
| { |
| u16 smid; |
| u32 ioc_state; |
| unsigned long timeleft; |
| bool issue_reset = false; |
| int rc; |
| void *request; |
| u16 wait_state_count; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| mutex_lock(&ioc->base_cmds.mutex); |
| |
| if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) { |
| pr_err(MPT3SAS_FMT "%s: base_cmd in use\n", |
| ioc->name, __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| wait_state_count = 0; |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 1); |
| while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { |
| if (wait_state_count++ == 10) { |
| pr_err(MPT3SAS_FMT |
| "%s: failed due to ioc not operational\n", |
| ioc->name, __func__); |
| rc = -EFAULT; |
| goto out; |
| } |
| ssleep(1); |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 1); |
| pr_info(MPT3SAS_FMT |
| "%s: waiting for operational state(count=%d)\n", |
| ioc->name, |
| __func__, wait_state_count); |
| } |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); |
| if (!smid) { |
| pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| rc = 0; |
| ioc->base_cmds.status = MPT3_CMD_PENDING; |
| request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->base_cmds.smid = smid; |
| memcpy(request, mpi_request, sizeof(Mpi2SepReply_t)); |
| init_completion(&ioc->base_cmds.done); |
| mpt3sas_base_put_smid_default(ioc, smid); |
| timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, |
| msecs_to_jiffies(10000)); |
| if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { |
| pr_err(MPT3SAS_FMT "%s: timeout\n", |
| ioc->name, __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi2SepRequest_t)/4); |
| if (!(ioc->base_cmds.status & MPT3_CMD_RESET)) |
| issue_reset = false; |
| goto issue_host_reset; |
| } |
| if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) |
| memcpy(mpi_reply, ioc->base_cmds.reply, |
| sizeof(Mpi2SepReply_t)); |
| else |
| memset(mpi_reply, 0, sizeof(Mpi2SepReply_t)); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| goto out; |
| |
| issue_host_reset: |
| if (issue_reset) |
| mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
| FORCE_BIG_HAMMER); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| rc = -EFAULT; |
| out: |
| mutex_unlock(&ioc->base_cmds.mutex); |
| return rc; |
| } |
| |
| /** |
| * _base_get_port_facts - obtain port facts reply and save in ioc |
| * @ioc: per adapter object |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag) |
| { |
| Mpi2PortFactsRequest_t mpi_request; |
| Mpi2PortFactsReply_t mpi_reply; |
| struct mpt3sas_port_facts *pfacts; |
| int mpi_reply_sz, mpi_request_sz, r; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| mpi_reply_sz = sizeof(Mpi2PortFactsReply_t); |
| mpi_request_sz = sizeof(Mpi2PortFactsRequest_t); |
| memset(&mpi_request, 0, mpi_request_sz); |
| mpi_request.Function = MPI2_FUNCTION_PORT_FACTS; |
| mpi_request.PortNumber = port; |
| r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, |
| (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); |
| |
| if (r != 0) { |
| pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n", |
| ioc->name, __func__, r); |
| return r; |
| } |
| |
| pfacts = &ioc->pfacts[port]; |
| memset(pfacts, 0, sizeof(struct mpt3sas_port_facts)); |
| pfacts->PortNumber = mpi_reply.PortNumber; |
| pfacts->VP_ID = mpi_reply.VP_ID; |
| pfacts->VF_ID = mpi_reply.VF_ID; |
| pfacts->MaxPostedCmdBuffers = |
| le16_to_cpu(mpi_reply.MaxPostedCmdBuffers); |
| |
| return 0; |
| } |
| |
| /** |
| * _base_get_ioc_facts - obtain ioc facts reply and save in ioc |
| * @ioc: per adapter object |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) |
| { |
| Mpi2IOCFactsRequest_t mpi_request; |
| Mpi2IOCFactsReply_t mpi_reply; |
| struct mpt3sas_facts *facts; |
| int mpi_reply_sz, mpi_request_sz, r; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t); |
| mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t); |
| memset(&mpi_request, 0, mpi_request_sz); |
| mpi_request.Function = MPI2_FUNCTION_IOC_FACTS; |
| r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, |
| (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); |
| |
| if (r != 0) { |
| pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n", |
| ioc->name, __func__, r); |
| return r; |
| } |
| |
| facts = &ioc->facts; |
| memset(facts, 0, sizeof(struct mpt3sas_facts)); |
| facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion); |
| facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion); |
| facts->VP_ID = mpi_reply.VP_ID; |
| facts->VF_ID = mpi_reply.VF_ID; |
| facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions); |
| facts->MaxChainDepth = mpi_reply.MaxChainDepth; |
| facts->WhoInit = mpi_reply.WhoInit; |
| facts->NumberOfPorts = mpi_reply.NumberOfPorts; |
| facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors; |
| facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit); |
| facts->MaxReplyDescriptorPostQueueDepth = |
| le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth); |
| facts->ProductID = le16_to_cpu(mpi_reply.ProductID); |
| facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities); |
| if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID)) |
| ioc->ir_firmware = 1; |
| if ((facts->IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE)) |
| ioc->rdpq_array_capable = 1; |
| facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word); |
| facts->IOCRequestFrameSize = |
| le16_to_cpu(mpi_reply.IOCRequestFrameSize); |
| facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators); |
| facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets); |
| ioc->shost->max_id = -1; |
| facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders); |
| facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures); |
| facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags); |
| facts->HighPriorityCredit = |
| le16_to_cpu(mpi_reply.HighPriorityCredit); |
| facts->ReplyFrameSize = mpi_reply.ReplyFrameSize; |
| facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle); |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "hba queue depth(%d), max chains per io(%d)\n", |
| ioc->name, facts->RequestCredit, |
| facts->MaxChainDepth)); |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT |
| "request frame size(%d), reply frame size(%d)\n", ioc->name, |
| facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4)); |
| return 0; |
| } |
| |
| /** |
| * _base_send_ioc_init - send ioc_init to firmware |
| * @ioc: per adapter object |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) |
| { |
| Mpi2IOCInitRequest_t mpi_request; |
| Mpi2IOCInitReply_t mpi_reply; |
| int i, r = 0; |
| struct timeval current_time; |
| u16 ioc_status; |
| u32 reply_post_free_array_sz = 0; |
| Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL; |
| dma_addr_t reply_post_free_array_dma; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_IOC_INIT; |
| mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER; |
| mpi_request.VF_ID = 0; /* TODO */ |
| mpi_request.VP_ID = 0; |
| mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION); |
| mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION); |
| |
| if (_base_is_controller_msix_enabled(ioc)) |
| mpi_request.HostMSIxVectors = ioc->reply_queue_count; |
| mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4); |
| mpi_request.ReplyDescriptorPostQueueDepth = |
| cpu_to_le16(ioc->reply_post_queue_depth); |
| mpi_request.ReplyFreeQueueDepth = |
| cpu_to_le16(ioc->reply_free_queue_depth); |
| |
| mpi_request.SenseBufferAddressHigh = |
| cpu_to_le32((u64)ioc->sense_dma >> 32); |
| mpi_request.SystemReplyAddressHigh = |
| cpu_to_le32((u64)ioc->reply_dma >> 32); |
| mpi_request.SystemRequestFrameBaseAddress = |
| cpu_to_le64((u64)ioc->request_dma); |
| mpi_request.ReplyFreeQueueAddress = |
| cpu_to_le64((u64)ioc->reply_free_dma); |
| |
| if (ioc->rdpq_array_enable) { |
| reply_post_free_array_sz = ioc->reply_queue_count * |
| sizeof(Mpi2IOCInitRDPQArrayEntry); |
| reply_post_free_array = pci_alloc_consistent(ioc->pdev, |
| reply_post_free_array_sz, &reply_post_free_array_dma); |
| if (!reply_post_free_array) { |
| pr_err(MPT3SAS_FMT |
| "reply_post_free_array: pci_alloc_consistent failed\n", |
| ioc->name); |
| r = -ENOMEM; |
| goto out; |
| } |
| memset(reply_post_free_array, 0, reply_post_free_array_sz); |
| for (i = 0; i < ioc->reply_queue_count; i++) |
| reply_post_free_array[i].RDPQBaseAddress = |
| cpu_to_le64( |
| (u64)ioc->reply_post[i].reply_post_free_dma); |
| mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE; |
| mpi_request.ReplyDescriptorPostQueueAddress = |
| cpu_to_le64((u64)reply_post_free_array_dma); |
| } else { |
| mpi_request.ReplyDescriptorPostQueueAddress = |
| cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma); |
| } |
| |
| /* This time stamp specifies number of milliseconds |
| * since epoch ~ midnight January 1, 1970. |
| */ |
| do_gettimeofday(¤t_time); |
| mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 + |
| (current_time.tv_usec / 1000)); |
| |
| if (ioc->logging_level & MPT_DEBUG_INIT) { |
| __le32 *mfp; |
| int i; |
| |
| mfp = (__le32 *)&mpi_request; |
| pr_info("\toffset:data\n"); |
| for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++) |
| pr_info("\t[0x%02x]:%08x\n", i*4, |
| le32_to_cpu(mfp[i])); |
| } |
| |
| r = _base_handshake_req_reply_wait(ioc, |
| sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request, |
| sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10, |
| sleep_flag); |
| |
| if (r != 0) { |
| pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n", |
| ioc->name, __func__, r); |
| goto out; |
| } |
| |
| ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; |
| if (ioc_status != MPI2_IOCSTATUS_SUCCESS || |
| mpi_reply.IOCLogInfo) { |
| pr_err(MPT3SAS_FMT "%s: failed\n", ioc->name, __func__); |
| r = -EIO; |
| } |
| |
| out: |
| if (reply_post_free_array) |
| pci_free_consistent(ioc->pdev, reply_post_free_array_sz, |
| reply_post_free_array, |
| reply_post_free_array_dma); |
| return r; |
| } |
| |
| /** |
| * mpt3sas_port_enable_done - command completion routine for port enable |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @msix_index: MSIX table index supplied by the OS |
| * @reply: reply message frame(lower 32bit addr) |
| * |
| * Return 1 meaning mf should be freed from _base_interrupt |
| * 0 means the mf is freed from this function. |
| */ |
| u8 |
| mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, |
| u32 reply) |
| { |
| MPI2DefaultReply_t *mpi_reply; |
| u16 ioc_status; |
| |
| if (ioc->port_enable_cmds.status == MPT3_CMD_NOT_USED) |
| return 1; |
| |
| mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); |
| if (!mpi_reply) |
| return 1; |
| |
| if (mpi_reply->Function != MPI2_FUNCTION_PORT_ENABLE) |
| return 1; |
| |
| ioc->port_enable_cmds.status &= ~MPT3_CMD_PENDING; |
| ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE; |
| ioc->port_enable_cmds.status |= MPT3_CMD_REPLY_VALID; |
| memcpy(ioc->port_enable_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); |
| ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; |
| if (ioc_status != MPI2_IOCSTATUS_SUCCESS) |
| ioc->port_enable_failed = 1; |
| |
| if (ioc->is_driver_loading) { |
| if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { |
| mpt3sas_port_enable_complete(ioc); |
| return 1; |
| } else { |
| ioc->start_scan_failed = ioc_status; |
| ioc->start_scan = 0; |
| return 1; |
| } |
| } |
| complete(&ioc->port_enable_cmds.done); |
| return 1; |
| } |
| |
| /** |
| * _base_send_port_enable - send port_enable(discovery stuff) to firmware |
| * @ioc: per adapter object |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_send_port_enable(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) |
| { |
| Mpi2PortEnableRequest_t *mpi_request; |
| Mpi2PortEnableReply_t *mpi_reply; |
| unsigned long timeleft; |
| int r = 0; |
| u16 smid; |
| u16 ioc_status; |
| |
| pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name); |
| |
| if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { |
| pr_err(MPT3SAS_FMT "%s: internal command already in use\n", |
| ioc->name, __func__); |
| return -EAGAIN; |
| } |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx); |
| if (!smid) { |
| pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| return -EAGAIN; |
| } |
| |
| ioc->port_enable_cmds.status = MPT3_CMD_PENDING; |
| mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->port_enable_cmds.smid = smid; |
| memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); |
| mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; |
| |
| init_completion(&ioc->port_enable_cmds.done); |
| mpt3sas_base_put_smid_default(ioc, smid); |
| timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done, |
| 300*HZ); |
| if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) { |
| pr_err(MPT3SAS_FMT "%s: timeout\n", |
| ioc->name, __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi2PortEnableRequest_t)/4); |
| if (ioc->port_enable_cmds.status & MPT3_CMD_RESET) |
| r = -EFAULT; |
| else |
| r = -ETIME; |
| goto out; |
| } |
| |
| mpi_reply = ioc->port_enable_cmds.reply; |
| ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; |
| if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { |
| pr_err(MPT3SAS_FMT "%s: failed with (ioc_status=0x%08x)\n", |
| ioc->name, __func__, ioc_status); |
| r = -EFAULT; |
| goto out; |
| } |
| |
| out: |
| ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; |
| pr_info(MPT3SAS_FMT "port enable: %s\n", ioc->name, ((r == 0) ? |
| "SUCCESS" : "FAILED")); |
| return r; |
| } |
| |
| /** |
| * mpt3sas_port_enable - initiate firmware discovery (don't wait for reply) |
| * @ioc: per adapter object |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc) |
| { |
| Mpi2PortEnableRequest_t *mpi_request; |
| u16 smid; |
| |
| pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name); |
| |
| if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { |
| pr_err(MPT3SAS_FMT "%s: internal command already in use\n", |
| ioc->name, __func__); |
| return -EAGAIN; |
| } |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx); |
| if (!smid) { |
| pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| return -EAGAIN; |
| } |
| |
| ioc->port_enable_cmds.status = MPT3_CMD_PENDING; |
| mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->port_enable_cmds.smid = smid; |
| memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); |
| mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; |
| |
| mpt3sas_base_put_smid_default(ioc, smid); |
| return 0; |
| } |
| |
| /** |
| * _base_determine_wait_on_discovery - desposition |
| * @ioc: per adapter object |
| * |
| * Decide whether to wait on discovery to complete. Used to either |
| * locate boot device, or report volumes ahead of physical devices. |
| * |
| * Returns 1 for wait, 0 for don't wait |
| */ |
| static int |
| _base_determine_wait_on_discovery(struct MPT3SAS_ADAPTER *ioc) |
| { |
| /* We wait for discovery to complete if IR firmware is loaded. |
| * The sas topology events arrive before PD events, so we need time to |
| * turn on the bit in ioc->pd_handles to indicate PD |
| * Also, it maybe required to report Volumes ahead of physical |
| * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set. |
| */ |
| if (ioc->ir_firmware) |
| return 1; |
| |
| /* if no Bios, then we don't need to wait */ |
| if (!ioc->bios_pg3.BiosVersion) |
| return 0; |
| |
| /* Bios is present, then we drop down here. |
| * |
| * If there any entries in the Bios Page 2, then we wait |
| * for discovery to complete. |
| */ |
| |
| /* Current Boot Device */ |
| if ((ioc->bios_pg2.CurrentBootDeviceForm & |
| MPI2_BIOSPAGE2_FORM_MASK) == |
| MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED && |
| /* Request Boot Device */ |
| (ioc->bios_pg2.ReqBootDeviceForm & |
| MPI2_BIOSPAGE2_FORM_MASK) == |
| MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED && |
| /* Alternate Request Boot Device */ |
| (ioc->bios_pg2.ReqAltBootDeviceForm & |
| MPI2_BIOSPAGE2_FORM_MASK) == |
| MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED) |
| return 0; |
| |
| return 1; |
| } |
| |
| /** |
| * _base_unmask_events - turn on notification for this event |
| * @ioc: per adapter object |
| * @event: firmware event |
| * |
| * The mask is stored in ioc->event_masks. |
| */ |
| static void |
| _base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event) |
| { |
| u32 desired_event; |
| |
| if (event >= 128) |
| return; |
| |
| desired_event = (1 << (event % 32)); |
| |
| if (event < 32) |
| ioc->event_masks[0] &= ~desired_event; |
| else if (event < 64) |
| ioc->event_masks[1] &= ~desired_event; |
| else if (event < 96) |
| ioc->event_masks[2] &= ~desired_event; |
| else if (event < 128) |
| ioc->event_masks[3] &= ~desired_event; |
| } |
| |
| /** |
| * _base_event_notification - send event notification |
| * @ioc: per adapter object |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_event_notification(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) |
| { |
| Mpi2EventNotificationRequest_t *mpi_request; |
| unsigned long timeleft; |
| u16 smid; |
| int r = 0; |
| int i; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| if (ioc->base_cmds.status & MPT3_CMD_PENDING) { |
| pr_err(MPT3SAS_FMT "%s: internal command already in use\n", |
| ioc->name, __func__); |
| return -EAGAIN; |
| } |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); |
| if (!smid) { |
| pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| return -EAGAIN; |
| } |
| ioc->base_cmds.status = MPT3_CMD_PENDING; |
| mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->base_cmds.smid = smid; |
| memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t)); |
| mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; |
| mpi_request->VF_ID = 0; /* TODO */ |
| mpi_request->VP_ID = 0; |
| for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) |
| mpi_request->EventMasks[i] = |
| cpu_to_le32(ioc->event_masks[i]); |
| init_completion(&ioc->base_cmds.done); |
| mpt3sas_base_put_smid_default(ioc, smid); |
| timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ); |
| if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { |
| pr_err(MPT3SAS_FMT "%s: timeout\n", |
| ioc->name, __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi2EventNotificationRequest_t)/4); |
| if (ioc->base_cmds.status & MPT3_CMD_RESET) |
| r = -EFAULT; |
| else |
| r = -ETIME; |
| } else |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s: complete\n", |
| ioc->name, __func__)); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| return r; |
| } |
| |
| /** |
| * mpt3sas_base_validate_event_type - validating event types |
| * @ioc: per adapter object |
| * @event: firmware event |
| * |
| * This will turn on firmware event notification when application |
| * ask for that event. We don't mask events that are already enabled. |
| */ |
| void |
| mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type) |
| { |
| int i, j; |
| u32 event_mask, desired_event; |
| u8 send_update_to_fw; |
| |
| for (i = 0, send_update_to_fw = 0; i < |
| MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) { |
| event_mask = ~event_type[i]; |
| desired_event = 1; |
| for (j = 0; j < 32; j++) { |
| if (!(event_mask & desired_event) && |
| (ioc->event_masks[i] & desired_event)) { |
| ioc->event_masks[i] &= ~desired_event; |
| send_update_to_fw = 1; |
| } |
| desired_event = (desired_event << 1); |
| } |
| } |
| |
| if (!send_update_to_fw) |
| return; |
| |
| mutex_lock(&ioc->base_cmds.mutex); |
| _base_event_notification(ioc, CAN_SLEEP); |
| mutex_unlock(&ioc->base_cmds.mutex); |
| } |
| |
| /** |
| * _base_diag_reset - the "big hammer" start of day reset |
| * @ioc: per adapter object |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) |
| { |
| u32 host_diagnostic; |
| u32 ioc_state; |
| u32 count; |
| u32 hcb_size; |
| |
| pr_info(MPT3SAS_FMT "sending diag reset !!\n", ioc->name); |
| |
| drsprintk(ioc, pr_info(MPT3SAS_FMT "clear interrupts\n", |
| ioc->name)); |
| |
| count = 0; |
| do { |
| /* Write magic sequence to WriteSequence register |
| * Loop until in diagnostic mode |
| */ |
| drsprintk(ioc, pr_info(MPT3SAS_FMT |
| "write magic sequence\n", ioc->name)); |
| writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence); |
| |
| /* wait 100 msec */ |
| if (sleep_flag == CAN_SLEEP) |
| msleep(100); |
| else |
| mdelay(100); |
| |
| if (count++ > 20) |
| goto out; |
| |
| host_diagnostic = readl(&ioc->chip->HostDiagnostic); |
| drsprintk(ioc, pr_info(MPT3SAS_FMT |
| "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n", |
| ioc->name, count, host_diagnostic)); |
| |
| } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); |
| |
| hcb_size = readl(&ioc->chip->HCBSize); |
| |
| drsprintk(ioc, pr_info(MPT3SAS_FMT "diag reset: issued\n", |
| ioc->name)); |
| writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, |
| &ioc->chip->HostDiagnostic); |
| |
| /*This delay allows the chip PCIe hardware time to finish reset tasks*/ |
| if (sleep_flag == CAN_SLEEP) |
| msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000); |
| else |
| mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000); |
| |
| /* Approximately 300 second max wait */ |
| for (count = 0; count < (300000000 / |
| MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) { |
| |
| host_diagnostic = readl(&ioc->chip->HostDiagnostic); |
| |
| if (host_diagnostic == 0xFFFFFFFF) |
| goto out; |
| if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) |
| break; |
| |
| /* Wait to pass the second read delay window */ |
| if (sleep_flag == CAN_SLEEP) |
| msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC |
| / 1000); |
| else |
| mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC |
| / 1000); |
| } |
| |
| if (host_diagnostic & MPI2_DIAG_HCB_MODE) { |
| |
| drsprintk(ioc, pr_info(MPT3SAS_FMT |
| "restart the adapter assuming the HCB Address points to good F/W\n", |
| ioc->name)); |
| host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK; |
| host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW; |
| writel(host_diagnostic, &ioc->chip->HostDiagnostic); |
| |
| drsprintk(ioc, pr_info(MPT3SAS_FMT |
| "re-enable the HCDW\n", ioc->name)); |
| writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE, |
| &ioc->chip->HCBSize); |
| } |
| |
| drsprintk(ioc, pr_info(MPT3SAS_FMT "restart the adapter\n", |
| ioc->name)); |
| writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET, |
| &ioc->chip->HostDiagnostic); |
| |
| drsprintk(ioc, pr_info(MPT3SAS_FMT |
| "disable writes to the diagnostic register\n", ioc->name)); |
| writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); |
| |
| drsprintk(ioc, pr_info(MPT3SAS_FMT |
| "Wait for FW to go to the READY state\n", ioc->name)); |
| ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20, |
| sleep_flag); |
| if (ioc_state) { |
| pr_err(MPT3SAS_FMT |
| "%s: failed going to ready state (ioc_state=0x%x)\n", |
| ioc->name, __func__, ioc_state); |
| goto out; |
| } |
| |
| pr_info(MPT3SAS_FMT "diag reset: SUCCESS\n", ioc->name); |
| return 0; |
| |
| out: |
| pr_err(MPT3SAS_FMT "diag reset: FAILED\n", ioc->name); |
| return -EFAULT; |
| } |
| |
| /** |
| * _base_make_ioc_ready - put controller in READY state |
| * @ioc: per adapter object |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * @type: FORCE_BIG_HAMMER or SOFT_RESET |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag, |
| enum reset_type type) |
| { |
| u32 ioc_state; |
| int rc; |
| int count; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| if (ioc->pci_error_recovery) |
| return 0; |
| |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| dhsprintk(ioc, pr_info(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n", |
| ioc->name, __func__, ioc_state)); |
| |
| /* if in RESET state, it should move to READY state shortly */ |
| count = 0; |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_RESET) { |
| while ((ioc_state & MPI2_IOC_STATE_MASK) != |
| MPI2_IOC_STATE_READY) { |
| if (count++ == 10) { |
| pr_err(MPT3SAS_FMT |
| "%s: failed going to ready state (ioc_state=0x%x)\n", |
| ioc->name, __func__, ioc_state); |
| return -EFAULT; |
| } |
| if (sleep_flag == CAN_SLEEP) |
| ssleep(1); |
| else |
| mdelay(1000); |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| } |
| } |
| |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) |
| return 0; |
| |
| if (ioc_state & MPI2_DOORBELL_USED) { |
| dhsprintk(ioc, pr_info(MPT3SAS_FMT |
| "unexpected doorbell active!\n", |
| ioc->name)); |
| goto issue_diag_reset; |
| } |
| |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { |
| mpt3sas_base_fault_info(ioc, ioc_state & |
| MPI2_DOORBELL_DATA_MASK); |
| goto issue_diag_reset; |
| } |
| |
| if (type == FORCE_BIG_HAMMER) |
| goto issue_diag_reset; |
| |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL) |
| if (!(_base_send_ioc_reset(ioc, |
| MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) { |
| return 0; |
| } |
| |
| issue_diag_reset: |
| rc = _base_diag_reset(ioc, CAN_SLEEP); |
| return rc; |
| } |
| |
| /** |
| * _base_make_ioc_operational - put controller in OPERATIONAL state |
| * @ioc: per adapter object |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) |
| { |
| int r, i; |
| unsigned long flags; |
| u32 reply_address; |
| u16 smid; |
| struct _tr_list *delayed_tr, *delayed_tr_next; |
| struct adapter_reply_queue *reply_q; |
| long reply_post_free; |
| u32 reply_post_free_sz, index = 0; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| /* clean the delayed target reset list */ |
| list_for_each_entry_safe(delayed_tr, delayed_tr_next, |
| &ioc->delayed_tr_list, list) { |
| list_del(&delayed_tr->list); |
| kfree(delayed_tr); |
| } |
| |
| |
| list_for_each_entry_safe(delayed_tr, delayed_tr_next, |
| &ioc->delayed_tr_volume_list, list) { |
| list_del(&delayed_tr->list); |
| kfree(delayed_tr); |
| } |
| |
| /* initialize the scsi lookup free list */ |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| INIT_LIST_HEAD(&ioc->free_list); |
| smid = 1; |
| for (i = 0; i < ioc->scsiio_depth; i++, smid++) { |
| INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list); |
| ioc->scsi_lookup[i].cb_idx = 0xFF; |
| ioc->scsi_lookup[i].smid = smid; |
| ioc->scsi_lookup[i].scmd = NULL; |
| list_add_tail(&ioc->scsi_lookup[i].tracker_list, |
| &ioc->free_list); |
| } |
| |
| /* hi-priority queue */ |
| INIT_LIST_HEAD(&ioc->hpr_free_list); |
| smid = ioc->hi_priority_smid; |
| for (i = 0; i < ioc->hi_priority_depth; i++, smid++) { |
| ioc->hpr_lookup[i].cb_idx = 0xFF; |
| ioc->hpr_lookup[i].smid = smid; |
| list_add_tail(&ioc->hpr_lookup[i].tracker_list, |
| &ioc->hpr_free_list); |
| } |
| |
| /* internal queue */ |
| INIT_LIST_HEAD(&ioc->internal_free_list); |
| smid = ioc->internal_smid; |
| for (i = 0; i < ioc->internal_depth; i++, smid++) { |
| ioc->internal_lookup[i].cb_idx = 0xFF; |
| ioc->internal_lookup[i].smid = smid; |
| list_add_tail(&ioc->internal_lookup[i].tracker_list, |
| &ioc->internal_free_list); |
| } |
| |
| /* chain pool */ |
| INIT_LIST_HEAD(&ioc->free_chain_list); |
| for (i = 0; i < ioc->chain_depth; i++) |
| list_add_tail(&ioc->chain_lookup[i].tracker_list, |
| &ioc->free_chain_list); |
| |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| |
| /* initialize Reply Free Queue */ |
| for (i = 0, reply_address = (u32)ioc->reply_dma ; |
| i < ioc->reply_free_queue_depth ; i++, reply_address += |
| ioc->reply_sz) |
| ioc->reply_free[i] = cpu_to_le32(reply_address); |
| |
| /* initialize reply queues */ |
| if (ioc->is_driver_loading) |
| _base_assign_reply_queues(ioc); |
| |
| /* initialize Reply Post Free Queue */ |
| reply_post_free_sz = ioc->reply_post_queue_depth * |
| sizeof(Mpi2DefaultReplyDescriptor_t); |
| reply_post_free = (long)ioc->reply_post[index].reply_post_free; |
| list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { |
| reply_q->reply_post_host_index = 0; |
| reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *) |
| reply_post_free; |
| for (i = 0; i < ioc->reply_post_queue_depth; i++) |
| reply_q->reply_post_free[i].Words = |
| cpu_to_le64(ULLONG_MAX); |
| if (!_base_is_controller_msix_enabled(ioc)) |
| goto skip_init_reply_post_free_queue; |
| /* |
| * If RDPQ is enabled, switch to the next allocation. |
| * Otherwise advance within the contiguous region. |
| */ |
| if (ioc->rdpq_array_enable) |
| reply_post_free = (long) |
| ioc->reply_post[++index].reply_post_free; |
| else |
| reply_post_free += reply_post_free_sz; |
| } |
| skip_init_reply_post_free_queue: |
| |
| r = _base_send_ioc_init(ioc, sleep_flag); |
| if (r) |
| return r; |
| |
| /* initialize reply free host index */ |
| ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1; |
| writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex); |
| |
| /* initialize reply post host index */ |
| list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { |
| writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT, |
| &ioc->chip->ReplyPostHostIndex); |
| if (!_base_is_controller_msix_enabled(ioc)) |
| goto skip_init_reply_post_host_index; |
| } |
| |
| skip_init_reply_post_host_index: |
| |
| _base_unmask_interrupts(ioc); |
| r = _base_event_notification(ioc, sleep_flag); |
| if (r) |
| return r; |
| |
| if (sleep_flag == CAN_SLEEP) |
| _base_static_config_pages(ioc); |
| |
| |
| if (ioc->is_driver_loading) { |
| ioc->wait_for_discovery_to_complete = |
| _base_determine_wait_on_discovery(ioc); |
| |
| return r; /* scan_start and scan_finished support */ |
| } |
| |
| r = _base_send_port_enable(ioc, sleep_flag); |
| if (r) |
| return r; |
| |
| return r; |
| } |
| |
| /** |
| * mpt3sas_base_free_resources - free resources controller resources |
| * @ioc: per adapter object |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct pci_dev *pdev = ioc->pdev; |
| |
| dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| if (ioc->chip_phys && ioc->chip) { |
| _base_mask_interrupts(ioc); |
| ioc->shost_recovery = 1; |
| _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); |
| ioc->shost_recovery = 0; |
| } |
| |
| _base_free_irq(ioc); |
| _base_disable_msix(ioc); |
| |
| if (ioc->chip_phys && ioc->chip) |
| iounmap(ioc->chip); |
| ioc->chip_phys = 0; |
| |
| if (pci_is_enabled(pdev)) { |
| pci_release_selected_regions(ioc->pdev, ioc->bars); |
| pci_disable_pcie_error_reporting(pdev); |
| pci_disable_device(pdev); |
| } |
| return; |
| } |
| |
| /** |
| * mpt3sas_base_attach - attach controller instance |
| * @ioc: per adapter object |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int r, i; |
| int cpu_id, last_cpu_id = 0; |
| |
| dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| /* setup cpu_msix_table */ |
| ioc->cpu_count = num_online_cpus(); |
| for_each_online_cpu(cpu_id) |
| last_cpu_id = cpu_id; |
| ioc->cpu_msix_table_sz = last_cpu_id + 1; |
| ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL); |
| ioc->reply_queue_count = 1; |
| if (!ioc->cpu_msix_table) { |
| dfailprintk(ioc, pr_info(MPT3SAS_FMT |
| "allocation for cpu_msix_table failed!!!\n", |
| ioc->name)); |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| |
| ioc->rdpq_array_enable_assigned = 0; |
| ioc->dma_mask = 0; |
| r = mpt3sas_base_map_resources(ioc); |
| if (r) |
| goto out_free_resources; |
| |
| |
| pci_set_drvdata(ioc->pdev, ioc->shost); |
| r = _base_get_ioc_facts(ioc, CAN_SLEEP); |
| if (r) |
| goto out_free_resources; |
| |
| /* |
| * In SAS3.0, |
| * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and |
| * Target Status - all require the IEEE formated scatter gather |
| * elements. |
| */ |
| |
| ioc->build_sg_scmd = &_base_build_sg_scmd_ieee; |
| ioc->build_sg = &_base_build_sg_ieee; |
| ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee; |
| ioc->mpi25 = 1; |
| ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t); |
| |
| /* |
| * These function pointers for other requests that don't |
| * the require IEEE scatter gather elements. |
| * |
| * For example Configuration Pages and SAS IOUNIT Control don't. |
| */ |
| ioc->build_sg_mpi = &_base_build_sg; |
| ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge; |
| |
| r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); |
| if (r) |
| goto out_free_resources; |
| |
| ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts, |
| sizeof(struct mpt3sas_port_facts), GFP_KERNEL); |
| if (!ioc->pfacts) { |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| |
| for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) { |
| r = _base_get_port_facts(ioc, i, CAN_SLEEP); |
| if (r) |
| goto out_free_resources; |
| } |
| |
| r = _base_allocate_memory_pools(ioc, CAN_SLEEP); |
| if (r) |
| goto out_free_resources; |
| |
| init_waitqueue_head(&ioc->reset_wq); |
| |
| /* allocate memory pd handle bitmask list */ |
| ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8); |
| if (ioc->facts.MaxDevHandle % 8) |
| ioc->pd_handles_sz++; |
| ioc->pd_handles = kzalloc(ioc->pd_handles_sz, |
| GFP_KERNEL); |
| if (!ioc->pd_handles) { |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| ioc->blocking_handles = kzalloc(ioc->pd_handles_sz, |
| GFP_KERNEL); |
| if (!ioc->blocking_handles) { |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| |
| ioc->fwfault_debug = mpt3sas_fwfault_debug; |
| |
| /* base internal command bits */ |
| mutex_init(&ioc->base_cmds.mutex); |
| ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| |
| /* port_enable command bits */ |
| ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; |
| |
| /* transport internal command bits */ |
| ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->transport_cmds.status = MPT3_CMD_NOT_USED; |
| mutex_init(&ioc->transport_cmds.mutex); |
| |
| /* scsih internal command bits */ |
| ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; |
| mutex_init(&ioc->scsih_cmds.mutex); |
| |
| /* task management internal command bits */ |
| ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->tm_cmds.status = MPT3_CMD_NOT_USED; |
| mutex_init(&ioc->tm_cmds.mutex); |
| |
| /* config page internal command bits */ |
| ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->config_cmds.status = MPT3_CMD_NOT_USED; |
| mutex_init(&ioc->config_cmds.mutex); |
| |
| /* ctl module internal command bits */ |
| ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); |
| ioc->ctl_cmds.status = MPT3_CMD_NOT_USED; |
| mutex_init(&ioc->ctl_cmds.mutex); |
| |
| if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply || |
| !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply || |
| !ioc->config_cmds.reply || !ioc->ctl_cmds.reply || |
| !ioc->ctl_cmds.sense) { |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| |
| for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) |
| ioc->event_masks[i] = -1; |
| |
| /* here we enable the events we care about */ |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY); |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE); |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST); |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE); |
| _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST); |
| _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME); |
| _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK); |
| _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS); |
| _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED); |
| _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD); |
| |
| r = _base_make_ioc_operational(ioc, CAN_SLEEP); |
| if (r) |
| goto out_free_resources; |
| |
| return 0; |
| |
| out_free_resources: |
| |
| ioc->remove_host = 1; |
| |
| mpt3sas_base_free_resources(ioc); |
| _base_release_memory_pools(ioc); |
| pci_set_drvdata(ioc->pdev, NULL); |
| kfree(ioc->cpu_msix_table); |
| kfree(ioc->pd_handles); |
| kfree(ioc->blocking_handles); |
| kfree(ioc->tm_cmds.reply); |
| kfree(ioc->transport_cmds.reply); |
| kfree(ioc->scsih_cmds.reply); |
| kfree(ioc->config_cmds.reply); |
| kfree(ioc->base_cmds.reply); |
| kfree(ioc->port_enable_cmds.reply); |
| kfree(ioc->ctl_cmds.reply); |
| kfree(ioc->ctl_cmds.sense); |
| kfree(ioc->pfacts); |
| ioc->ctl_cmds.reply = NULL; |
| ioc->base_cmds.reply = NULL; |
| ioc->tm_cmds.reply = NULL; |
| ioc->scsih_cmds.reply = NULL; |
| ioc->transport_cmds.reply = NULL; |
| ioc->config_cmds.reply = NULL; |
| ioc->pfacts = NULL; |
| return r; |
| } |
| |
| |
| /** |
| * mpt3sas_base_detach - remove controller instance |
| * @ioc: per adapter object |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc) |
| { |
| dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| mpt3sas_base_stop_watchdog(ioc); |
| mpt3sas_base_free_resources(ioc); |
| _base_release_memory_pools(ioc); |
| pci_set_drvdata(ioc->pdev, NULL); |
| kfree(ioc->cpu_msix_table); |
| kfree(ioc->pd_handles); |
| kfree(ioc->blocking_handles); |
| kfree(ioc->pfacts); |
| kfree(ioc->ctl_cmds.reply); |
| kfree(ioc->ctl_cmds.sense); |
| kfree(ioc->base_cmds.reply); |
| kfree(ioc->port_enable_cmds.reply); |
| kfree(ioc->tm_cmds.reply); |
| kfree(ioc->transport_cmds.reply); |
| kfree(ioc->scsih_cmds.reply); |
| kfree(ioc->config_cmds.reply); |
| } |
| |
| /** |
| * _base_reset_handler - reset callback handler (for base) |
| * @ioc: per adapter object |
| * @reset_phase: phase |
| * |
| * The handler for doing any required cleanup or initialization. |
| * |
| * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET, |
| * MPT3_IOC_DONE_RESET |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase) |
| { |
| mpt3sas_scsih_reset_handler(ioc, reset_phase); |
| mpt3sas_ctl_reset_handler(ioc, reset_phase); |
| switch (reset_phase) { |
| case MPT3_IOC_PRE_RESET: |
| dtmprintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__)); |
| break; |
| case MPT3_IOC_AFTER_RESET: |
| dtmprintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__)); |
| if (ioc->transport_cmds.status & MPT3_CMD_PENDING) { |
| ioc->transport_cmds.status |= MPT3_CMD_RESET; |
| mpt3sas_base_free_smid(ioc, ioc->transport_cmds.smid); |
| complete(&ioc->transport_cmds.done); |
| } |
| if (ioc->base_cmds.status & MPT3_CMD_PENDING) { |
| ioc->base_cmds.status |= MPT3_CMD_RESET; |
| mpt3sas_base_free_smid(ioc, ioc->base_cmds.smid); |
| complete(&ioc->base_cmds.done); |
| } |
| if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { |
| ioc->port_enable_failed = 1; |
| ioc->port_enable_cmds.status |= MPT3_CMD_RESET; |
| mpt3sas_base_free_smid(ioc, ioc->port_enable_cmds.smid); |
| if (ioc->is_driver_loading) { |
| ioc->start_scan_failed = |
| MPI2_IOCSTATUS_INTERNAL_ERROR; |
| ioc->start_scan = 0; |
| ioc->port_enable_cmds.status = |
| MPT3_CMD_NOT_USED; |
| } else |
| complete(&ioc->port_enable_cmds.done); |
| } |
| if (ioc->config_cmds.status & MPT3_CMD_PENDING) { |
| ioc->config_cmds.status |= MPT3_CMD_RESET; |
| mpt3sas_base_free_smid(ioc, ioc->config_cmds.smid); |
| ioc->config_cmds.smid = USHRT_MAX; |
| complete(&ioc->config_cmds.done); |
| } |
| break; |
| case MPT3_IOC_DONE_RESET: |
| dtmprintk(ioc, pr_info(MPT3SAS_FMT |
| "%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__)); |
| break; |
| } |
| } |
| |
| /** |
| * _wait_for_commands_to_complete - reset controller |
| * @ioc: Pointer to MPT_ADAPTER structure |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * |
| * This function waiting(3s) for all pending commands to complete |
| * prior to putting controller in reset. |
| */ |
| static void |
| _wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) |
| { |
| u32 ioc_state; |
| unsigned long flags; |
| u16 i; |
| |
| ioc->pending_io_count = 0; |
| if (sleep_flag != CAN_SLEEP) |
| return; |
| |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) |
| return; |
| |
| /* pending command count */ |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| for (i = 0; i < ioc->scsiio_depth; i++) |
| if (ioc->scsi_lookup[i].cb_idx != 0xFF) |
| ioc->pending_io_count++; |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| |
| if (!ioc->pending_io_count) |
| return; |
| |
| /* wait for pending commands to complete */ |
| wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ); |
| } |
| |
| /** |
| * mpt3sas_base_hard_reset_handler - reset controller |
| * @ioc: Pointer to MPT_ADAPTER structure |
| * @sleep_flag: CAN_SLEEP or NO_SLEEP |
| * @type: FORCE_BIG_HAMMER or SOFT_RESET |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag, |
| enum reset_type type) |
| { |
| int r; |
| unsigned long flags; |
| u32 ioc_state; |
| u8 is_fault = 0, is_trigger = 0; |
| |
| dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name, |
| __func__)); |
| |
| if (ioc->pci_error_recovery) { |
| pr_err(MPT3SAS_FMT "%s: pci error recovery reset\n", |
| ioc->name, __func__); |
| r = 0; |
| goto out_unlocked; |
| } |
| |
| if (mpt3sas_fwfault_debug) |
| mpt3sas_halt_firmware(ioc); |
| |
| /* TODO - What we really should be doing is pulling |
| * out all the code associated with NO_SLEEP; its never used. |
| * That is legacy code from mpt fusion driver, ported over. |
| * I will leave this BUG_ON here for now till its been resolved. |
| */ |
| BUG_ON(sleep_flag == NO_SLEEP); |
| |
| /* wait for an active reset in progress to complete */ |
| if (!mutex_trylock(&ioc->reset_in_progress_mutex)) { |
| do { |
| ssleep(1); |
| } while (ioc->shost_recovery == 1); |
| dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, |
| __func__)); |
| return ioc->ioc_reset_in_progress_status; |
| } |
| |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| ioc->shost_recovery = 1; |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_REGISTERED) && |
| (!(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_RELEASED))) { |
| is_trigger = 1; |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) |
| is_fault = 1; |
| } |
| _base_reset_handler(ioc, MPT3_IOC_PRE_RESET); |
| _wait_for_commands_to_complete(ioc, sleep_flag); |
| _base_mask_interrupts(ioc); |
| r = _base_make_ioc_ready(ioc, sleep_flag, type); |
| if (r) |
| goto out; |
| _base_reset_handler(ioc, MPT3_IOC_AFTER_RESET); |
| |
| /* If this hard reset is called while port enable is active, then |
| * there is no reason to call make_ioc_operational |
| */ |
| if (ioc->is_driver_loading && ioc->port_enable_failed) { |
| ioc->remove_host = 1; |
| r = -EFAULT; |
| goto out; |
| } |
| r = _base_get_ioc_facts(ioc, CAN_SLEEP); |
| if (r) |
| goto out; |
| |
| if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable) |
| panic("%s: Issue occurred with flashing controller firmware." |
| "Please reboot the system and ensure that the correct" |
| " firmware version is running\n", ioc->name); |
| |
| r = _base_make_ioc_operational(ioc, sleep_flag); |
| if (!r) |
| _base_reset_handler(ioc, MPT3_IOC_DONE_RESET); |
| |
| out: |
| dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: %s\n", |
| ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED"))); |
| |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| ioc->ioc_reset_in_progress_status = r; |
| ioc->shost_recovery = 0; |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| ioc->ioc_reset_count++; |
| mutex_unlock(&ioc->reset_in_progress_mutex); |
| |
| out_unlocked: |
| if ((r == 0) && is_trigger) { |
| if (is_fault) |
| mpt3sas_trigger_master(ioc, MASTER_TRIGGER_FW_FAULT); |
| else |
| mpt3sas_trigger_master(ioc, |
| MASTER_TRIGGER_ADAPTER_RESET); |
| } |
| dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, |
| __func__)); |
| return r; |
| } |