Merge "msm: cam: add UAPI support for UBWC and HFR changes" into msm-4.9
diff --git a/Documentation/devicetree/bindings/arm/msm/spss_utils.txt b/Documentation/devicetree/bindings/arm/msm/spss_utils.txt
new file mode 100644
index 0000000..d325574
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/spss_utils.txt
@@ -0,0 +1,35 @@
+Qualcomm Technologies, Inc. Secure Processor SubSystem Utilities (spss_utils)
+
+The Secure Processor SubSystem (SPSS) is a dedicated subsystem for security.
+It has its own CPU, memories, and cryptographic engine.
+It shall provide cryptographic services to other subsystems.
+The SPSS firmware is loaded by PIL driver.
+The communication with SPSS is done via spcom driver, using glink.
+
+The spss_utils driver selects the SPSS firmware file,
+according to a dedicated fuse and the platform HW version.
+
+Required properties:
+-compatible : should be "qcom,spss_utils"
+-qcom,spss-fuse1-addr: fuse1 register physical address
+-qcom,spss-fuse1-bit: fuse1 relevant bit
+-qcom,spss-fuse2-addr: fuse2 register physical address
+-qcom,spss-fuse2-bit: fuse2 relevant bit
+-qcom,spss-dev-firmware-name: dev firmware file name
+-qcom,spss-test-firmware-name: test firmware file name
+-qcom,spss-prod-firmware-name: production firmware file name
+-qcom,spss-debug-reg-addr: debug register physical address
+
+Example:
+ qcom,spss_utils {
+ compatible = "qcom,spss-utils";
+
+ qcom,spss-fuse1-addr = <0x007841c4>;
+ qcom,spss-fuse1-bit = <27>;
+ qcom,spss-fuse2-addr = <0x007841c4>;
+ qcom,spss-fuse2-bit = <26>;
+ qcom,spss-dev-firmware-name = "spss1d"; /* 8 chars max */
+ qcom,spss-test-firmware-name = "spss1t"; /* 8 chars max */
+ qcom,spss-prod-firmware-name = "spss1p"; /* 8 chars max */
+ qcom,spss-debug-reg-addr = <0x01886020>;
+ };
diff --git a/Makefile b/Makefile
index 51b7f2f..c2660d2 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 4
PATCHLEVEL = 9
-SUBLEVEL = 22
+SUBLEVEL = 23
EXTRAVERSION =
NAME = Roaring Lionus
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index ba0695b..d2deed5 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -83,7 +83,6 @@
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_GCC_PLUGINS
select HAVE_GENERIC_DMA_COHERENT
- select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP if NUMA
diff --git a/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-cdp.dtsi b/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-cdp.dtsi
new file mode 100644
index 0000000..fce1687
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-cdp.dtsi
@@ -0,0 +1,352 @@
+/*
+ * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&soc {
+ led_flash_rear: qcom,camera-flash@0 {
+ cell-index = <0>;
+ reg = <0x0>;
+ compatible = "qcom,camera-flash";
+ qcom,flash-source = <&pmi8998_flash0 &pmi8998_flash1>;
+ qcom,torch-source = <&pmi8998_torch0 &pmi8998_torch1>;
+ qcom,switch-source = <&pmi8998_switch0>;
+ status = "ok";
+ };
+
+ led_flash_front: qcom,camera-flash@1 {
+ cell-index = <1>;
+ reg = <0x1>;
+ compatible = "qcom,camera-flash";
+ qcom,flash-source = <&pmi8998_flash2>;
+ qcom,torch-source = <&pmi8998_torch2>;
+ qcom,switch-source = <&pmi8998_switch1>;
+ status = "ok";
+ };
+
+ actuator_regulator: gpio-regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0x0>;
+ regulator-name = "actuator_regulator";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <100>;
+ enable-active-high;
+ gpio = <&tlmm 27 0>;
+ vin-supply = <&pmi8998_bob>;
+ };
+
+ camera_rear_ldo: gpio-regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <0x1>;
+ regulator-name = "camera_rear_ldo";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <135>;
+ enable-active-high;
+ gpio = <&pm8998_gpios 12 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_rear_dvdd_en_default>;
+ vin-supply = <&pm8998_s3>;
+ };
+
+ camera_ldo: gpio-regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <0x2>;
+ regulator-name = "camera_ldo";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <233>;
+ enable-active-high;
+ gpio = <&pm8998_gpios 9 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_dvdd_en_default>;
+ vin-supply = <&pm8998_s3>;
+ };
+};
+
+&cci {
+ actuator_rear: qcom,actuator@0 {
+ cell-index = <0>;
+ reg = <0x0>;
+ compatible = "qcom,actuator";
+ qcom,cci-master = <0>;
+ cam_vaf-supply = <&actuator_regulator>;
+ qcom,cam-vreg-name = "cam_vaf";
+ qcom,cam-vreg-min-voltage = <2800000>;
+ qcom,cam-vreg-max-voltage = <2800000>;
+ qcom,cam-vreg-op-mode = <0>;
+ };
+
+ actuator_front: qcom,actuator@1 {
+ cell-index = <1>;
+ reg = <0x1>;
+ compatible = "qcom,actuator";
+ qcom,cci-master = <1>;
+ cam_vaf-supply = <&actuator_regulator>;
+ qcom,cam-vreg-name = "cam_vaf";
+ qcom,cam-vreg-min-voltage = <2800000>;
+ qcom,cam-vreg-max-voltage = <2800000>;
+ qcom,cam-vreg-op-mode = <0>;
+ };
+
+ ois_rear: qcom,ois@0 {
+ cell-index = <0>;
+ reg = <0x0>;
+ compatible = "qcom,ois";
+ qcom,cci-master = <0>;
+ cam_vaf-supply = <&actuator_regulator>;
+ qcom,cam-vreg-name = "cam_vaf";
+ qcom,cam-vreg-min-voltage = <2800000>;
+ qcom,cam-vreg-max-voltage = <2800000>;
+ qcom,cam-vreg-op-mode = <0>;
+ status = "disabled";
+ };
+
+ eeprom_rear: qcom,eeprom@0 {
+ cell-index = <0>;
+ reg = <0>;
+ compatible = "qcom,eeprom";
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ cam_vdig-supply = <&camera_rear_ldo>;
+ qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+ qcom,cam-vreg-min-voltage = <0 3312000 1050000>;
+ qcom,cam-vreg-max-voltage = <0 3600000 1050000>;
+ qcom,cam-vreg-op-mode = <0 80000 105000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk0_active
+ &cam_sensor_rear_active>;
+ pinctrl-1 = <&cam_sensor_mclk0_suspend
+ &cam_sensor_rear_suspend>;
+ gpios = <&tlmm 13 0>,
+ <&tlmm 80 0>,
+ <&tlmm 79 0>,
+ <&tlmm 27 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-vaf = <3>;
+ qcom,gpio-req-tbl-num = <0 1 2 3>;
+ qcom,gpio-req-tbl-flags = <1 0 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
+ "CAM_RESET0",
+ "CAM_VANA0",
+ "CAM_VAF";
+ qcom,sensor-position = <0>;
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <0>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+
+ eeprom_rear_aux: qcom,eeprom@1 {
+ cell-index = <1>;
+ reg = <0x1>;
+ compatible = "qcom,eeprom";
+ cam_vdig-supply = <&camera_ldo>;
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
+ qcom,cam-vreg-min-voltage = <1050000 0 3312000>;
+ qcom,cam-vreg-max-voltage = <1050000 0 3600000>;
+ qcom,cam-vreg-op-mode = <105000 0 80000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk2_active
+ &cam_sensor_rear2_active>;
+ pinctrl-1 = <&cam_sensor_mclk2_suspend
+ &cam_sensor_rear2_suspend>;
+ gpios = <&tlmm 15 0>,
+ <&tlmm 9 0>,
+ <&tlmm 8 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
+ "CAM_RESET1",
+ "CAM_VANA1";
+ qcom,sensor-position = <0>;
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <1>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+
+ eeprom_front: qcom,eeprom@2 {
+ cell-index = <2>;
+ reg = <0x2>;
+ compatible = "qcom,eeprom";
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ cam_vdig-supply = <&camera_ldo>;
+ qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+ qcom,cam-vreg-min-voltage = <0 3312000 1050000>;
+ qcom,cam-vreg-max-voltage = <0 3600000 1050000>;
+ qcom,cam-vreg-op-mode = <0 80000 105000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk1_active
+ &cam_sensor_front_active>;
+ pinctrl-1 = <&cam_sensor_mclk1_suspend
+ &cam_sensor_front_suspend>;
+ gpios = <&tlmm 14 0>,
+ <&tlmm 28 0>,
+ <&tlmm 8 0>,
+ <&tlmm 27 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-vaf = <3>;
+ qcom,gpio-req-tbl-num = <0 1 2 3>;
+ qcom,gpio-req-tbl-flags = <1 0 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
+ "CAM_RESET2",
+ "CAM_VANA2",
+ "CAM_VAF";
+ qcom,sensor-position = <1>;
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <1>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+
+ qcom,cam-sensor@0 {
+ cell-index = <0>;
+ compatible = "qcom,cam-sensor";
+ reg = <0x0>;
+ qcom,csiphy-sd-index = <0>;
+ qcom,sensor-position-roll = <90>;
+ qcom,sensor-position-pitch = <0>;
+ qcom,sensor-position-yaw = <180>;
+ qcom,led-flash-src = <&led_flash_rear>;
+ qcom,actuator-src = <&actuator_rear>;
+ qcom,ois-src = <&ois_rear>;
+ qcom,eeprom-src = <&eeprom_rear>;
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ cam_vdig-supply = <&camera_rear_ldo>;
+ qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+ qcom,cam-vreg-min-voltage = <0 3312000 1050000>;
+ qcom,cam-vreg-max-voltage = <0 3600000 1050000>;
+ qcom,cam-vreg-op-mode = <0 80000 105000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk0_active
+ &cam_sensor_rear_active>;
+ pinctrl-1 = <&cam_sensor_mclk0_suspend
+ &cam_sensor_rear_suspend>;
+ gpios = <&tlmm 13 0>,
+ <&tlmm 80 0>,
+ <&tlmm 79 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
+ "CAM_RESET0",
+ "CAM_VANA";
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <0>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+
+ qcom,cam-sensor@1 {
+ cell-index = <1>;
+ compatible = "qcom,cam-sensor";
+ reg = <0x1>;
+ qcom,csiphy-sd-index = <1>;
+ qcom,sensor-position-roll = <90>;
+ qcom,sensor-position-pitch = <0>;
+ qcom,sensor-position-yaw = <180>;
+ qcom,eeprom-src = <&eeprom_rear_aux>;
+ cam_vdig-supply = <&camera_ldo>;
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
+ qcom,cam-vreg-min-voltage = <1050000 0 3312000>;
+ qcom,cam-vreg-max-voltage = <1050000 0 3600000>;
+ qcom,cam-vreg-op-mode = <105000 0 80000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk2_active
+ &cam_sensor_rear2_active>;
+ pinctrl-1 = <&cam_sensor_mclk2_suspend
+ &cam_sensor_rear2_suspend>;
+ gpios = <&tlmm 15 0>,
+ <&tlmm 9 0>,
+ <&tlmm 8 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
+ "CAM_RESET1",
+ "CAM_VANA1";
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <1>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+
+ qcom,cam-sensor@2 {
+ cell-index = <2>;
+ compatible = "qcom,cam-sensor";
+ reg = <0x02>;
+ qcom,csiphy-sd-index = <2>;
+ qcom,sensor-position-roll = <90>;
+ qcom,sensor-position-pitch = <0>;
+ qcom,sensor-position-yaw = <0>;
+ qcom,eeprom-src = <&eeprom_front>;
+ qcom,actuator-src = <&actuator_front>;
+ qcom,led-flash-src = <&led_flash_front>;
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ cam_vdig-supply = <&camera_ldo>;
+ qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+ qcom,cam-vreg-min-voltage = <0 3312000 1050000>;
+ qcom,cam-vreg-max-voltage = <0 3600000 1050000>;
+ qcom,cam-vreg-op-mode = <0 80000 105000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk1_active
+ &cam_sensor_front_active>;
+ pinctrl-1 = <&cam_sensor_mclk1_suspend
+ &cam_sensor_front_suspend>;
+ gpios = <&tlmm 14 0>,
+ <&tlmm 28 0>,
+ <&tlmm 8 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
+ "CAM_RESET2",
+ "CAM_VANA1";
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <1>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-mtp.dtsi b/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-mtp.dtsi
new file mode 100644
index 0000000..fce1687
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-mtp.dtsi
@@ -0,0 +1,352 @@
+/*
+ * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&soc {
+ led_flash_rear: qcom,camera-flash@0 {
+ cell-index = <0>;
+ reg = <0x0>;
+ compatible = "qcom,camera-flash";
+ qcom,flash-source = <&pmi8998_flash0 &pmi8998_flash1>;
+ qcom,torch-source = <&pmi8998_torch0 &pmi8998_torch1>;
+ qcom,switch-source = <&pmi8998_switch0>;
+ status = "ok";
+ };
+
+ led_flash_front: qcom,camera-flash@1 {
+ cell-index = <1>;
+ reg = <0x1>;
+ compatible = "qcom,camera-flash";
+ qcom,flash-source = <&pmi8998_flash2>;
+ qcom,torch-source = <&pmi8998_torch2>;
+ qcom,switch-source = <&pmi8998_switch1>;
+ status = "ok";
+ };
+
+ actuator_regulator: gpio-regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0x0>;
+ regulator-name = "actuator_regulator";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <100>;
+ enable-active-high;
+ gpio = <&tlmm 27 0>;
+ vin-supply = <&pmi8998_bob>;
+ };
+
+ camera_rear_ldo: gpio-regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <0x1>;
+ regulator-name = "camera_rear_ldo";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <135>;
+ enable-active-high;
+ gpio = <&pm8998_gpios 12 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_rear_dvdd_en_default>;
+ vin-supply = <&pm8998_s3>;
+ };
+
+ camera_ldo: gpio-regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <0x2>;
+ regulator-name = "camera_ldo";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <233>;
+ enable-active-high;
+ gpio = <&pm8998_gpios 9 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_dvdd_en_default>;
+ vin-supply = <&pm8998_s3>;
+ };
+};
+
+&cci {
+ actuator_rear: qcom,actuator@0 {
+ cell-index = <0>;
+ reg = <0x0>;
+ compatible = "qcom,actuator";
+ qcom,cci-master = <0>;
+ cam_vaf-supply = <&actuator_regulator>;
+ qcom,cam-vreg-name = "cam_vaf";
+ qcom,cam-vreg-min-voltage = <2800000>;
+ qcom,cam-vreg-max-voltage = <2800000>;
+ qcom,cam-vreg-op-mode = <0>;
+ };
+
+ actuator_front: qcom,actuator@1 {
+ cell-index = <1>;
+ reg = <0x1>;
+ compatible = "qcom,actuator";
+ qcom,cci-master = <1>;
+ cam_vaf-supply = <&actuator_regulator>;
+ qcom,cam-vreg-name = "cam_vaf";
+ qcom,cam-vreg-min-voltage = <2800000>;
+ qcom,cam-vreg-max-voltage = <2800000>;
+ qcom,cam-vreg-op-mode = <0>;
+ };
+
+ ois_rear: qcom,ois@0 {
+ cell-index = <0>;
+ reg = <0x0>;
+ compatible = "qcom,ois";
+ qcom,cci-master = <0>;
+ cam_vaf-supply = <&actuator_regulator>;
+ qcom,cam-vreg-name = "cam_vaf";
+ qcom,cam-vreg-min-voltage = <2800000>;
+ qcom,cam-vreg-max-voltage = <2800000>;
+ qcom,cam-vreg-op-mode = <0>;
+ status = "disabled";
+ };
+
+ eeprom_rear: qcom,eeprom@0 {
+ cell-index = <0>;
+ reg = <0>;
+ compatible = "qcom,eeprom";
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ cam_vdig-supply = <&camera_rear_ldo>;
+ qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+ qcom,cam-vreg-min-voltage = <0 3312000 1050000>;
+ qcom,cam-vreg-max-voltage = <0 3600000 1050000>;
+ qcom,cam-vreg-op-mode = <0 80000 105000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk0_active
+ &cam_sensor_rear_active>;
+ pinctrl-1 = <&cam_sensor_mclk0_suspend
+ &cam_sensor_rear_suspend>;
+ gpios = <&tlmm 13 0>,
+ <&tlmm 80 0>,
+ <&tlmm 79 0>,
+ <&tlmm 27 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-vaf = <3>;
+ qcom,gpio-req-tbl-num = <0 1 2 3>;
+ qcom,gpio-req-tbl-flags = <1 0 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
+ "CAM_RESET0",
+ "CAM_VANA0",
+ "CAM_VAF";
+ qcom,sensor-position = <0>;
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <0>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+
+ eeprom_rear_aux: qcom,eeprom@1 {
+ cell-index = <1>;
+ reg = <0x1>;
+ compatible = "qcom,eeprom";
+ cam_vdig-supply = <&camera_ldo>;
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
+ qcom,cam-vreg-min-voltage = <1050000 0 3312000>;
+ qcom,cam-vreg-max-voltage = <1050000 0 3600000>;
+ qcom,cam-vreg-op-mode = <105000 0 80000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk2_active
+ &cam_sensor_rear2_active>;
+ pinctrl-1 = <&cam_sensor_mclk2_suspend
+ &cam_sensor_rear2_suspend>;
+ gpios = <&tlmm 15 0>,
+ <&tlmm 9 0>,
+ <&tlmm 8 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
+ "CAM_RESET1",
+ "CAM_VANA1";
+ qcom,sensor-position = <0>;
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <1>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+
+ eeprom_front: qcom,eeprom@2 {
+ cell-index = <2>;
+ reg = <0x2>;
+ compatible = "qcom,eeprom";
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ cam_vdig-supply = <&camera_ldo>;
+ qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+ qcom,cam-vreg-min-voltage = <0 3312000 1050000>;
+ qcom,cam-vreg-max-voltage = <0 3600000 1050000>;
+ qcom,cam-vreg-op-mode = <0 80000 105000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk1_active
+ &cam_sensor_front_active>;
+ pinctrl-1 = <&cam_sensor_mclk1_suspend
+ &cam_sensor_front_suspend>;
+ gpios = <&tlmm 14 0>,
+ <&tlmm 28 0>,
+ <&tlmm 8 0>,
+ <&tlmm 27 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-vaf = <3>;
+ qcom,gpio-req-tbl-num = <0 1 2 3>;
+ qcom,gpio-req-tbl-flags = <1 0 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
+ "CAM_RESET2",
+ "CAM_VANA2",
+ "CAM_VAF";
+ qcom,sensor-position = <1>;
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <1>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+
+ qcom,cam-sensor@0 {
+ cell-index = <0>;
+ compatible = "qcom,cam-sensor";
+ reg = <0x0>;
+ qcom,csiphy-sd-index = <0>;
+ qcom,sensor-position-roll = <90>;
+ qcom,sensor-position-pitch = <0>;
+ qcom,sensor-position-yaw = <180>;
+ qcom,led-flash-src = <&led_flash_rear>;
+ qcom,actuator-src = <&actuator_rear>;
+ qcom,ois-src = <&ois_rear>;
+ qcom,eeprom-src = <&eeprom_rear>;
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ cam_vdig-supply = <&camera_rear_ldo>;
+ qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+ qcom,cam-vreg-min-voltage = <0 3312000 1050000>;
+ qcom,cam-vreg-max-voltage = <0 3600000 1050000>;
+ qcom,cam-vreg-op-mode = <0 80000 105000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk0_active
+ &cam_sensor_rear_active>;
+ pinctrl-1 = <&cam_sensor_mclk0_suspend
+ &cam_sensor_rear_suspend>;
+ gpios = <&tlmm 13 0>,
+ <&tlmm 80 0>,
+ <&tlmm 79 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
+ "CAM_RESET0",
+ "CAM_VANA";
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <0>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+
+ qcom,cam-sensor@1 {
+ cell-index = <1>;
+ compatible = "qcom,cam-sensor";
+ reg = <0x1>;
+ qcom,csiphy-sd-index = <1>;
+ qcom,sensor-position-roll = <90>;
+ qcom,sensor-position-pitch = <0>;
+ qcom,sensor-position-yaw = <180>;
+ qcom,eeprom-src = <&eeprom_rear_aux>;
+ cam_vdig-supply = <&camera_ldo>;
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
+ qcom,cam-vreg-min-voltage = <1050000 0 3312000>;
+ qcom,cam-vreg-max-voltage = <1050000 0 3600000>;
+ qcom,cam-vreg-op-mode = <105000 0 80000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk2_active
+ &cam_sensor_rear2_active>;
+ pinctrl-1 = <&cam_sensor_mclk2_suspend
+ &cam_sensor_rear2_suspend>;
+ gpios = <&tlmm 15 0>,
+ <&tlmm 9 0>,
+ <&tlmm 8 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
+ "CAM_RESET1",
+ "CAM_VANA1";
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <1>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+
+ qcom,cam-sensor@2 {
+ cell-index = <2>;
+ compatible = "qcom,cam-sensor";
+ reg = <0x02>;
+ qcom,csiphy-sd-index = <2>;
+ qcom,sensor-position-roll = <90>;
+ qcom,sensor-position-pitch = <0>;
+ qcom,sensor-position-yaw = <0>;
+ qcom,eeprom-src = <&eeprom_front>;
+ qcom,actuator-src = <&actuator_front>;
+ qcom,led-flash-src = <&led_flash_front>;
+ cam_vio-supply = <&pm8998_lvs1>;
+ cam_vana-supply = <&pmi8998_bob>;
+ cam_vdig-supply = <&camera_ldo>;
+ qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+ qcom,cam-vreg-min-voltage = <0 3312000 1050000>;
+ qcom,cam-vreg-max-voltage = <0 3600000 1050000>;
+ qcom,cam-vreg-op-mode = <0 80000 105000>;
+ qcom,gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk1_active
+ &cam_sensor_front_active>;
+ pinctrl-1 = <&cam_sensor_mclk1_suspend
+ &cam_sensor_front_suspend>;
+ gpios = <&tlmm 14 0>,
+ <&tlmm 28 0>,
+ <&tlmm 8 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-vana = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
+ "CAM_RESET2",
+ "CAM_VANA1";
+ qcom,sensor-mode = <0>;
+ qcom,cci-master = <1>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;
+ clock-names = "cam_clk";
+ qcom,clock-rates = <24000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-camera.dtsi b/arch/arm64/boot/dts/qcom/sdm845-camera.dtsi
index c197d65..cd9c8a8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-camera.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-camera.dtsi
@@ -16,4 +16,213 @@
compatible = "qcom,cam-req-mgr";
status = "ok";
};
+
+ qcom,csiphy@ac65000 {
+ cell-index = <0>;
+ compatible = "qcom,csiphy-v1.0", "qcom,csiphy";
+ reg = <0x0ac65000 0x1000>;
+ reg-names = "csiphy";
+ interrupts = <0 477 0>;
+ interrupt-names = "csiphy";
+ gdscr-supply = <&titan_top_gdsc>;
+ qcom,cam-vreg-name = "gdscr";
+ qcom,csi-vdd-voltage = <1200000>;
+ qcom,mipi-csi-vdd-supply = <&pm8998_l26>;
+ clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+ <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+ <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY0_CLK>,
+ <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>;
+ clock-names = "camnoc_axi_clk",
+ "soc_ahb_clk",
+ "slow_ahb_src_clk",
+ "cpas_ahb_clk",
+ "cphy_rx_clk_src",
+ "csiphy0_clk",
+ "csi0phytimer_clk_src",
+ "csi0phytimer_clk",
+ "ife_0_csid_clk",
+ "ife_0_csid_clk_src";
+ qcom,clock-rates =
+ <0 0 80000000 0 320000000 0 269333333 0 0 384000000>;
+ status = "ok";
+ };
+
+ qcom,csiphy@ac66000{
+ cell-index = <1>;
+ compatible = "qcom,csiphy-v1.0", "qcom,csiphy";
+ reg = <0xac66000 0x1000>;
+ reg-names = "csiphy";
+ interrupts = <0 478 0>;
+ interrupt-names = "csiphy";
+ gdscr-supply = <&titan_top_gdsc>;
+ qcom,cam-vreg-name = "gdscr";
+ qcom,csi-vdd-voltage = <1200000>;
+ qcom,mipi-csi-vdd-supply = <&pm8998_l26>;
+ clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+ <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+ <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY1_CLK>,
+ <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>;
+ clock-names = "camnoc_axi_clk",
+ "soc_ahb_clk",
+ "slow_ahb_src_clk",
+ "cpas_ahb_clk",
+ "cphy_rx_clk_src",
+ "csiphy1_clk",
+ "csi1phytimer_clk_src",
+ "csi1phytimer_clk",
+ "ife_1_csid_clk",
+ "ife_1_csid_clk_src";
+ qcom,clock-rates =
+ <0 0 80000000 0 320000000 0 269333333 0 0 384000000>;
+
+ status = "ok";
+ };
+
+ qcom,csiphy@ac67000 {
+ cell-index = <2>;
+ compatible = "qcom,csiphy-v1.0", "qcom,csiphy";
+ reg = <0xac67000 0x1000>;
+ reg-names = "csiphy";
+ interrupts = <0 479 0>;
+ interrupt-names = "csiphy";
+ gdscr-supply = <&titan_top_gdsc>;
+ qcom,cam-vreg-name = "gdscr";
+ qcom,csi-vdd-voltage = <1200000>;
+ qcom,mipi-csi-vdd-supply = <&pm8998_l26>;
+ clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+ <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+ <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY2_CLK>,
+ <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>;
+ clock-names = "camnoc_axi_clk",
+ "soc_ahb_clk",
+ "slow_ahb_src_clk",
+ "cpas_ahb_clk",
+ "cphy_rx_clk_src",
+ "csiphy2_clk",
+ "csi2phytimer_clk_src",
+ "csi2phytimer_clk",
+ "ife_lite_csid_clk",
+ "ife_lite_csid_clk_src";
+ qcom,clock-rates =
+ <0 0 80000000 0 320000000 0 269333333 0 0 384000000>;
+ status = "ok";
+ };
+
+ cci: qcom,cci@ac4a000 {
+ cell-index = <0>;
+ compatible = "qcom,cci";
+ reg = <0xac4a000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "cci";
+ interrupts = <0 460 0>;
+ interrupt-names = "cci";
+ status = "ok";
+ gdscr-supply = <&titan_top_gdsc>;
+ qcom,cam-vreg-name = "gdscr";
+ clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+ <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+ <&clock_camcc CAM_CC_CCI_CLK>,
+ <&clock_camcc CAM_CC_CCI_CLK_SRC>;
+ clock-names = "camnoc_axi_clk",
+ "soc_ahb_clk",
+ "slow_ahb_src_clk",
+ "cpas_ahb_clk",
+ "cci_clk",
+ "cci_clk_src";
+ qcom,clock-rates = <0 0 80000000 0 0 37500000>;
+ pinctrl-names = "cci_default", "cci_suspend";
+ pinctrl-0 = <&cci0_active &cci1_active>;
+ pinctrl-1 = <&cci0_suspend &cci1_suspend>;
+ gpios = <&tlmm 17 0>,
+ <&tlmm 18 0>,
+ <&tlmm 19 0>,
+ <&tlmm 20 0>;
+ qcom,gpio-tbl-num = <0 1 2 3>;
+ qcom,gpio-tbl-flags = <1 1 1 1>;
+ qcom,gpio-tbl-label = "CCI_I2C_DATA0",
+ "CCI_I2C_CLK0",
+ "CCI_I2C_DATA1",
+ "CCI_I2C_CLK1";
+
+ i2c_freq_100Khz: qcom,i2c_standard_mode {
+ qcom,hw-thigh = <201>;
+ qcom,hw-tlow = <174>;
+ qcom,hw-tsu-sto = <204>;
+ qcom,hw-tsu-sta = <231>;
+ qcom,hw-thd-dat = <22>;
+ qcom,hw-thd-sta = <162>;
+ qcom,hw-tbuf = <227>;
+ qcom,hw-scl-stretch-en = <0>;
+ qcom,hw-trdhld = <6>;
+ qcom,hw-tsp = <3>;
+ qcom,cci-clk-src = <37500000>;
+ status = "ok";
+ };
+
+ i2c_freq_400Khz: qcom,i2c_fast_mode {
+ qcom,hw-thigh = <38>;
+ qcom,hw-tlow = <56>;
+ qcom,hw-tsu-sto = <40>;
+ qcom,hw-tsu-sta = <40>;
+ qcom,hw-thd-dat = <22>;
+ qcom,hw-thd-sta = <35>;
+ qcom,hw-tbuf = <62>;
+ qcom,hw-scl-stretch-en = <0>;
+ qcom,hw-trdhld = <6>;
+ qcom,hw-tsp = <3>;
+ qcom,cci-clk-src = <37500000>;
+ status = "ok";
+ };
+
+ i2c_freq_custom: qcom,i2c_custom_mode {
+ qcom,hw-thigh = <38>;
+ qcom,hw-tlow = <56>;
+ qcom,hw-tsu-sto = <40>;
+ qcom,hw-tsu-sta = <40>;
+ qcom,hw-thd-dat = <22>;
+ qcom,hw-thd-sta = <35>;
+ qcom,hw-tbuf = <62>;
+ qcom,hw-scl-stretch-en = <1>;
+ qcom,hw-trdhld = <6>;
+ qcom,hw-tsp = <3>;
+ qcom,cci-clk-src = <37500000>;
+ status = "ok";
+ };
+
+ i2c_freq_1Mhz: qcom,i2c_fast_plus_mode {
+ qcom,hw-thigh = <16>;
+ qcom,hw-tlow = <22>;
+ qcom,hw-tsu-sto = <17>;
+ qcom,hw-tsu-sta = <18>;
+ qcom,hw-thd-dat = <16>;
+ qcom,hw-thd-sta = <15>;
+ qcom,hw-tbuf = <24>;
+ qcom,hw-scl-stretch-en = <0>;
+ qcom,hw-trdhld = <3>;
+ qcom,hw-tsp = <3>;
+ qcom,cci-clk-src = <37500000>;
+ status = "ok";
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cdp.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cdp.dtsi
index 7f9351d..96ce5a8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cdp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cdp.dtsi
@@ -11,7 +11,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
-
+#include "sdm845-camera-sensor-cdp.dtsi"
&soc {
sound-tavil {
qcom,us-euro-gpios = <&tavil_us_euro_sw>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi b/arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi
index f7da384..e36ccf2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi
@@ -11,7 +11,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
-
+#include "sdm845-camera-sensor-mtp.dtsi"
&soc {
gpio_keys {
compatible = "gpio-keys";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-pinctrl.dtsi b/arch/arm64/boot/dts/qcom/sdm845-pinctrl.dtsi
index a5ed9aa..bd09c7c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-pinctrl.dtsi
@@ -2285,6 +2285,231 @@
};
};
};
+
+ cci0_active: cci0_active {
+ mux {
+ /* CLK, DATA */
+ pins = "gpio17","gpio18"; // Only 2
+ function = "cci_i2c";
+ };
+
+ config {
+ pins = "gpio17","gpio18";
+ bias-pull-up; /* PULL UP*/
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cci0_suspend: cci0_suspend {
+ mux {
+ /* CLK, DATA */
+ pins = "gpio17","gpio18";
+ function = "cci_i2c";
+ };
+
+ config {
+ pins = "gpio17","gpio18";
+ bias-pull-down; /* PULL DOWN */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cci1_active: cci1_active {
+ mux {
+ /* CLK, DATA */
+ pins = "gpio19","gpio20";
+ function = "cci_i2c";
+ };
+
+ config {
+ pins = "gpio19","gpio20";
+ bias-pull-up; /* PULL UP*/
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cci1_suspend: cci1_suspend {
+ mux {
+ /* CLK, DATA */
+ pins = "gpio19","gpio20";
+ function = "cci_i2c";
+ };
+
+ config {
+ pins = "gpio19","gpio20";
+ bias-pull-down; /* PULL DOWN */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+ /* MCLK0 */
+ mux {
+ pins = "gpio13";
+ function = "cam_mclk";
+ };
+
+ config {
+ pins = "gpio13";
+ bias-disable; /* No PULL */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+ /* MCLK0 */
+ mux {
+ pins = "gpio13";
+ function = "cam_mclk";
+ };
+
+ config {
+ pins = "gpio13";
+ bias-pull-down; /* PULL DOWN */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_rear_active: cam_sensor_rear_active {
+ /* RESET, AVDD LDO */
+ mux {
+ pins = "gpio80","gpio79";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio80","gpio79";
+ bias-disable; /* No PULL */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_rear_suspend: cam_sensor_rear_suspend {
+ /* RESET, AVDD LDO */
+ mux {
+ pins = "gpio80","gpio79";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio80","gpio79";
+ bias-disable; /* No PULL */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+ /* MCLK1 */
+ mux {
+ pins = "gpio14";
+ function = "cam_mclk";
+ };
+
+ config {
+ pins = "gpio14";
+ bias-disable; /* No PULL */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+ /* MCLK1 */
+ mux {
+ pins = "gpio14";
+ function = "cam_mclk";
+ };
+
+ config {
+ pins = "gpio14";
+ bias-pull-down; /* PULL DOWN */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_front_active: cam_sensor_front_active {
+ /* RESET AVDD_LDO*/
+ mux {
+ pins = "gpio28", "gpio8";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio28", "gpio8";
+ bias-disable; /* No PULL */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_front_suspend: cam_sensor_front_suspend {
+ /* RESET */
+ mux {
+ pins = "gpio28";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio28";
+ bias-disable; /* No PULL */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+ /* MCLK1 */
+ mux {
+ /* CLK, DATA */
+ pins = "gpio15";
+ function = "cam_mclk";
+ };
+
+ config {
+ pins = "gpio15";
+ bias-disable; /* No PULL */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+ /* MCLK1 */
+ mux {
+ /* CLK, DATA */
+ pins = "gpio15";
+ function = "cam_mclk";
+ };
+
+ config {
+ pins = "gpio15";
+ bias-pull-down; /* PULL DOWN */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_rear2_active: cam_sensor_rear2_active {
+ /* RESET, STANDBY */
+ mux {
+ pins = "gpio9","gpio8";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio9","gpio8";
+ bias-disable; /* No PULL */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ cam_sensor_rear2_suspend: cam_sensor_rear2_suspend {
+ /* RESET, STANDBY */
+ mux {
+ pins = "gpio9","gpio8";
+ function = "gpio";
+ };
+ config {
+ pins = "gpio9","gpio8";
+ bias-disable; /* No PULL */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
};
};
@@ -2328,6 +2553,24 @@
power-source = <0>;
};
};
+
+ camera_dvdd_en {
+ camera_dvdd_en_default: camera_dvdd_en_default {
+ pins = "gpio9";
+ function = "normal";
+ power-source = <0>;
+ output-low;
+ };
+ };
+
+ camera_rear_dvdd_en {
+ camera_rear_dvdd_en_default: camera_rear_dvdd_en_default {
+ pins = "gpio12";
+ function = "normal";
+ power-source = <0>;
+ output-low;
+ };
+ };
};
&pmi8998_gpios {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-vidc.dtsi b/arch/arm64/boot/dts/qcom/sdm845-vidc.dtsi
index 2d181a4..da1414d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-vidc.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-vidc.dtsi
@@ -34,15 +34,19 @@
/* Clocks */
clock-names = "core_clk", "iface_clk", "bus_clk",
- "core0_clk", "core1_clk";
+ "core0_clk", "core0_bus_clk",
+ "core1_clk", "core1_bus_clk";
clocks = <&clock_videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
<&clock_videocc VIDEO_CC_VENUS_AHB_CLK>,
<&clock_videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
<&clock_videocc VIDEO_CC_VCODEC0_CORE_CLK>,
- <&clock_videocc VIDEO_CC_VCODEC1_CORE_CLK>;
+ <&clock_videocc VIDEO_CC_VCODEC0_AXI_CLK>,
+ <&clock_videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+ <&clock_videocc VIDEO_CC_VCODEC1_AXI_CLK>;
qcom,proxy-clock-names = "core_clk", "iface_clk",
- "bus_clk", "core0_clk", "core1_clk";
- qcom,clock-configs = <0x0 0x0 0x0 0x0 0x0>;
+ "bus_clk", "core0_clk", "core0_bus_clk",
+ "core1_clk", "core1_bus_clk";
+ qcom,clock-configs = <0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
qcom,allowed-clock-rates = <200000000 320000000 380000000
444000000 533000000>;
qcom,clock-freq-tbl {
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 259c5b7..a852277 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -909,7 +909,7 @@
< 652800000 0x401c0422 0x00002020 0x1 5 >,
< 729600000 0x401c0526 0x00002020 0x1 6 >,
< 806400000 0x401c062a 0x00002222 0x1 7 >,
- < 883200000 0x4024072b 0x00002525 0x1 8 >,
+ < 883200000 0x4024072e 0x00002525 0x1 8 >,
< 960000000 0x40240832 0x00002828 0x1 9 >,
< 1036800000 0x40240936 0x00002b2b 0x1 10 >,
< 1113600000 0x402c0a3a 0x00002e2e 0x1 11 >,
@@ -1879,6 +1879,20 @@
status = "ok";
};
+ spss_utils: qcom,spss_utils {
+ compatible = "qcom,spss-utils";
+ /* spss fuses physical address */
+ qcom,spss-fuse1-addr = <0x007841c4>;
+ qcom,spss-fuse1-bit = <27>;
+ qcom,spss-fuse2-addr = <0x007841c4>;
+ qcom,spss-fuse2-bit = <26>;
+ qcom,spss-dev-firmware-name = "spss1d"; /* 8 chars max */
+ qcom,spss-test-firmware-name = "spss1t"; /* 8 chars max */
+ qcom,spss-prod-firmware-name = "spss1p"; /* 8 chars max */
+ qcom,spss-debug-reg-addr = <0x01886020>;
+ status = "ok";
+ };
+
qcom,glink_pkt {
compatible = "qcom,glinkpkt";
diff --git a/arch/arm64/configs/sdm845-perf_defconfig b/arch/arm64/configs/sdm845-perf_defconfig
index 59aaff4..1d0b50d 100644
--- a/arch/arm64/configs/sdm845-perf_defconfig
+++ b/arch/arm64/configs/sdm845-perf_defconfig
@@ -225,6 +225,7 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_QSEECOM=y
CONFIG_MEMORY_STATE_TIME=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
@@ -409,6 +410,7 @@
CONFIG_QPNP_COINCELL=y
CONFIG_QPNP_REVID=y
CONFIG_USB_BAM=y
+CONFIG_SEEMP_CORE=y
CONFIG_MSM_GCC_SDM845=y
CONFIG_MSM_VIDEOCC_SDM845=y
CONFIG_MSM_CAMCC_SDM845=y
@@ -440,6 +442,7 @@
CONFIG_MSM_GLINK_SMEM_NATIVE_XPRT=y
CONFIG_MSM_GLINK_SPI_XPRT=y
CONFIG_MSM_SPCOM=y
+CONFIG_MSM_SPSS_UTILS=y
CONFIG_TRACER_PKT=y
CONFIG_QTI_RPMH_API=y
CONFIG_MSM_SMP2P=y
diff --git a/arch/arm64/configs/sdm845_defconfig b/arch/arm64/configs/sdm845_defconfig
index 3ccc503..d9c54c5 100644
--- a/arch/arm64/configs/sdm845_defconfig
+++ b/arch/arm64/configs/sdm845_defconfig
@@ -234,6 +234,7 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_QSEECOM=y
CONFIG_UID_SYS_STATS=y
CONFIG_MEMORY_STATE_TIME=y
CONFIG_SCSI=y
@@ -426,6 +427,7 @@
CONFIG_QPNP_COINCELL=y
CONFIG_QPNP_REVID=y
CONFIG_USB_BAM=y
+CONFIG_SEEMP_CORE=y
CONFIG_MSM_GCC_SDM845=y
CONFIG_MSM_VIDEOCC_SDM845=y
CONFIG_MSM_CAMCC_SDM845=y
@@ -460,6 +462,7 @@
CONFIG_MSM_GLINK_SMEM_NATIVE_XPRT=y
CONFIG_MSM_GLINK_SPI_XPRT=y
CONFIG_MSM_SPCOM=y
+CONFIG_MSM_SPSS_UTILS=y
CONFIG_TRACER_PKT=y
CONFIG_QTI_RPMH_API=y
CONFIG_MSM_SMP2P=y
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9a6e11b6..5a4f2eb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -9,6 +9,7 @@
select HAVE_CONTEXT_TRACKING
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
+ select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_OPROFILE
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 6bf10e7..956db6e 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -17,6 +17,18 @@
#include <irq.h>
+#define IRQ_STACK_SIZE THREAD_SIZE
+
+extern void *irq_stack[NR_CPUS];
+
+static inline bool on_irq_stack(int cpu, unsigned long sp)
+{
+ unsigned long low = (unsigned long)irq_stack[cpu];
+ unsigned long high = low + IRQ_STACK_SIZE;
+
+ return (low <= sp && sp <= high);
+}
+
#ifdef CONFIG_I8259
static inline int irq_canonicalize(int irq)
{
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index eebf395..2f182bd 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -216,12 +216,19 @@
LONG_S $25, PT_R25(sp)
LONG_S $28, PT_R28(sp)
LONG_S $31, PT_R31(sp)
+
+ /* Set thread_info if we're coming from user mode */
+ mfc0 k0, CP0_STATUS
+ sll k0, 3 /* extract cu0 bit */
+ bltz k0, 9f
+
ori $28, sp, _THREAD_MASK
xori $28, _THREAD_MASK
#ifdef CONFIG_CPU_CAVIUM_OCTEON
.set mips64
pref 0, 0($28) /* Prefetch the current pointer */
#endif
+9:
.set pop
.endm
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index fae2f94..4be2763 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -102,6 +102,7 @@
OFFSET(TI_REGS, thread_info, regs);
DEFINE(_THREAD_SIZE, THREAD_SIZE);
DEFINE(_THREAD_MASK, THREAD_MASK);
+ DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE);
BLANK();
}
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 52a4fdf..2ac6c26 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -187,9 +187,44 @@
LONG_L s0, TI_REGS($28)
LONG_S sp, TI_REGS($28)
- PTR_LA ra, ret_from_irq
- PTR_LA v0, plat_irq_dispatch
- jr v0
+
+ /*
+ * SAVE_ALL ensures we are using a valid kernel stack for the thread.
+ * Check if we are already using the IRQ stack.
+ */
+ move s1, sp # Preserve the sp
+
+ /* Get IRQ stack for this CPU */
+ ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+ lui k1, %hi(irq_stack)
+#else
+ lui k1, %highest(irq_stack)
+ daddiu k1, %higher(irq_stack)
+ dsll k1, 16
+ daddiu k1, %hi(irq_stack)
+ dsll k1, 16
+#endif
+ LONG_SRL k0, SMP_CPUID_PTRSHIFT
+ LONG_ADDU k1, k0
+ LONG_L t0, %lo(irq_stack)(k1)
+
+ # Check if already on IRQ stack
+ PTR_LI t1, ~(_THREAD_SIZE-1)
+ and t1, t1, sp
+ beq t0, t1, 2f
+
+ /* Switch to IRQ stack */
+ li t1, _IRQ_STACK_SIZE
+ PTR_ADD sp, t0, t1
+
+2:
+ jal plat_irq_dispatch
+
+ /* Restore sp */
+ move sp, s1
+
+ j ret_from_irq
#ifdef CONFIG_CPU_MICROMIPS
nop
#endif
@@ -262,8 +297,44 @@
LONG_L s0, TI_REGS($28)
LONG_S sp, TI_REGS($28)
- PTR_LA ra, ret_from_irq
- jr v0
+
+ /*
+ * SAVE_ALL ensures we are using a valid kernel stack for the thread.
+ * Check if we are already using the IRQ stack.
+ */
+ move s1, sp # Preserve the sp
+
+ /* Get IRQ stack for this CPU */
+ ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+ lui k1, %hi(irq_stack)
+#else
+ lui k1, %highest(irq_stack)
+ daddiu k1, %higher(irq_stack)
+ dsll k1, 16
+ daddiu k1, %hi(irq_stack)
+ dsll k1, 16
+#endif
+ LONG_SRL k0, SMP_CPUID_PTRSHIFT
+ LONG_ADDU k1, k0
+ LONG_L t0, %lo(irq_stack)(k1)
+
+ # Check if already on IRQ stack
+ PTR_LI t1, ~(_THREAD_SIZE-1)
+ and t1, t1, sp
+ beq t0, t1, 2f
+
+ /* Switch to IRQ stack */
+ li t1, _IRQ_STACK_SIZE
+ PTR_ADD sp, t0, t1
+
+2:
+ jalr v0
+
+ /* Restore sp */
+ move sp, s1
+
+ j ret_from_irq
END(except_vec_vi_handler)
/*
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index f25f7ea..2b0a371 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -25,6 +25,8 @@
#include <linux/atomic.h>
#include <asm/uaccess.h>
+void *irq_stack[NR_CPUS];
+
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
@@ -58,6 +60,15 @@
clear_c0_status(ST0_IM);
arch_init_irq();
+
+ for_each_possible_cpu(i) {
+ int irq_pages = IRQ_STACK_SIZE / PAGE_SIZE;
+ void *s = (void *)__get_free_pages(GFP_KERNEL, irq_pages);
+
+ irq_stack[i] = s;
+ pr_debug("CPU%d IRQ stack at 0x%p - 0x%p\n", i,
+ irq_stack[i], irq_stack[i] + IRQ_STACK_SIZE);
+ }
}
#ifdef CONFIG_DEBUG_STACKOVERFLOW
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 1652f36..fbbf5fc 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -33,6 +33,7 @@
#include <asm/dsemul.h>
#include <asm/dsp.h>
#include <asm/fpu.h>
+#include <asm/irq.h>
#include <asm/msa.h>
#include <asm/pgtable.h>
#include <asm/mipsregs.h>
@@ -556,7 +557,19 @@
unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
unsigned long pc, unsigned long *ra)
{
- unsigned long stack_page = (unsigned long)task_stack_page(task);
+ unsigned long stack_page = 0;
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ if (on_irq_stack(cpu, *sp)) {
+ stack_page = (unsigned long)irq_stack[cpu];
+ break;
+ }
+ }
+
+ if (!stack_page)
+ stack_page = (unsigned long)task_stack_page(task);
+
return unwind_stack_by_address(stack_page, sp, pc, ra);
}
#endif
diff --git a/block/blk-mq.c b/block/blk-mq.c
index ee54ad0..7b597ec 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1474,7 +1474,7 @@
INIT_LIST_HEAD(&tags->page_list);
tags->rqs = kzalloc_node(set->queue_depth * sizeof(struct request *),
- GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY,
+ GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY,
set->numa_node);
if (!tags->rqs) {
blk_mq_free_tags(tags);
@@ -1500,7 +1500,7 @@
do {
page = alloc_pages_node(set->numa_node,
- GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY | __GFP_ZERO,
+ GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY | __GFP_ZERO,
this_order);
if (page)
break;
@@ -1521,7 +1521,7 @@
* Allow kmemleak to scan these pages as they contain pointers
* to additional allocations like via ops->init_request().
*/
- kmemleak_alloc(p, order_to_size(this_order), 1, GFP_KERNEL);
+ kmemleak_alloc(p, order_to_size(this_order), 1, GFP_NOIO);
entries_per_page = order_to_size(this_order) / rq_size;
to_do = min(entries_per_page, set->queue_depth - i);
left -= to_do * rq_size;
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index bc48a84..3e1367a 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -573,9 +573,12 @@
controlling the behavior of this hardware.
config DEVPORT
- bool
+ bool "/dev/port character device"
depends on ISA || PCI
default y
+ help
+ Say Y here if you want to support the /dev/port device. The /dev/port
+ device is similar to /dev/mem, but for I/O ports.
source "drivers/s390/char/Kconfig"
diff --git a/drivers/char/diag/diagchar_core.c b/drivers/char/diag/diagchar_core.c
index ac777b0..c44a9ea 100644
--- a/drivers/char/diag/diagchar_core.c
+++ b/drivers/char/diag/diagchar_core.c
@@ -701,6 +701,11 @@
list_for_each_safe(start, temp, &driver->cmd_reg_list) {
item = list_entry(start, struct diag_cmd_reg_t, link);
+ if (item == NULL || &item->entry == NULL) {
+ pr_err("diag: In %s, unable to search command\n",
+ __func__);
+ return NULL;
+ }
temp_entry = &item->entry;
if (temp_entry->cmd_code == entry->cmd_code &&
temp_entry->subsys_id == entry->subsys_id &&
diff --git a/drivers/char/diag/diagfwd_peripheral.c b/drivers/char/diag/diagfwd_peripheral.c
index 4f7c1e0..6685be3 100644
--- a/drivers/char/diag/diagfwd_peripheral.c
+++ b/drivers/char/diag/diagfwd_peripheral.c
@@ -983,8 +983,6 @@
}
if (fwd_info->buf_1 && !atomic_read(&fwd_info->buf_1->in_busy)) {
- temp_buf = fwd_info->buf_1;
- atomic_set(&temp_buf->in_busy, 1);
if (driver->feature[fwd_info->peripheral].encode_hdlc &&
(fwd_info->type == TYPE_DATA ||
fwd_info->type == TYPE_CMD)) {
@@ -994,9 +992,11 @@
read_buf = fwd_info->buf_1->data;
read_len = fwd_info->buf_1->len;
}
+ if (read_buf) {
+ temp_buf = fwd_info->buf_1;
+ atomic_set(&temp_buf->in_busy, 1);
+ }
} else if (fwd_info->buf_2 && !atomic_read(&fwd_info->buf_2->in_busy)) {
- temp_buf = fwd_info->buf_2;
- atomic_set(&temp_buf->in_busy, 1);
if (driver->feature[fwd_info->peripheral].encode_hdlc &&
(fwd_info->type == TYPE_DATA ||
fwd_info->type == TYPE_CMD)) {
@@ -1006,6 +1006,10 @@
read_buf = fwd_info->buf_2->data;
read_len = fwd_info->buf_2->len;
}
+ if (read_buf) {
+ temp_buf = fwd_info->buf_2;
+ atomic_set(&temp_buf->in_busy, 1);
+ }
} else {
pr_debug("diag: In %s, both buffers are empty for p: %d, t: %d\n",
__func__, fwd_info->peripheral, fwd_info->type);
diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index 8fc2345..79b1a59 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -796,7 +796,10 @@
};
static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = {
+ F(400000, P_BI_TCXO, 12, 1, 4),
F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2),
+ F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
{ }
@@ -824,8 +827,9 @@
};
static const struct freq_tbl ftbl_gcc_sdcc4_apps_clk_src[] = {
- F(9600000, P_BI_TCXO, 2, 0, 0),
+ F(400000, P_BI_TCXO, 12, 1, 4),
F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2),
F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
{ }
@@ -1474,7 +1478,7 @@
static struct clk_branch gcc_ddrss_gpu_axi_clk = {
.halt_reg = 0x44038,
- .halt_check = BRANCH_HALT,
+ .halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x44038,
.enable_mask = BIT(0),
@@ -1661,7 +1665,7 @@
static struct clk_branch gcc_gpu_memnoc_gfx_clk = {
.halt_reg = 0x7100c,
- .halt_check = BRANCH_HALT,
+ .halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x7100c,
.enable_mask = BIT(0),
diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
index 851015e..354a16a 100644
--- a/drivers/crypto/caam/caampkc.c
+++ b/drivers/crypto/caam/caampkc.c
@@ -506,7 +506,7 @@
ctx->dev = caam_jr_alloc();
if (IS_ERR(ctx->dev)) {
- dev_err(ctx->dev, "Job Ring Device allocation for transform failed\n");
+ pr_err("Job Ring Device allocation for transform failed\n");
return PTR_ERR(ctx->dev);
}
diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index e483b78..98468b9 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -282,7 +282,8 @@
/* Try to run it through DECO0 */
ret = run_descriptor_deco0(ctrldev, desc, &status);
- if (ret || status) {
+ if (ret ||
+ (status && status != JRSTA_SSRC_JUMP_HALT_CC)) {
dev_err(ctrldev,
"Failed to deinstantiate RNG4 SH%d\n",
sh_idx);
diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index cf04d24..6b54e02 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -303,6 +303,9 @@
.llseek = dma_buf_llseek,
.poll = dma_buf_poll,
.unlocked_ioctl = dma_buf_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = dma_buf_ioctl,
+#endif
};
/*
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 670beeb..923150d 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -240,6 +240,7 @@
case I915_PARAM_IRQ_ACTIVE:
case I915_PARAM_ALLOW_BATCHBUFFER:
case I915_PARAM_LAST_DISPATCH:
+ case I915_PARAM_HAS_EXEC_CONSTANTS:
/* Reject all old ums/dri params. */
return -ENODEV;
case I915_PARAM_CHIPSET_ID:
@@ -266,9 +267,6 @@
case I915_PARAM_HAS_BSD2:
value = intel_engine_initialized(&dev_priv->engine[VCS2]);
break;
- case I915_PARAM_HAS_EXEC_CONSTANTS:
- value = INTEL_GEN(dev_priv) >= 4;
- break;
case I915_PARAM_HAS_LLC:
value = HAS_LLC(dev_priv);
break;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index da832d3..e0d7245 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1225,7 +1225,7 @@
unsigned boosts;
/* manual wa residency calculations */
- struct intel_rps_ei up_ei, down_ei;
+ struct intel_rps_ei ei;
/*
* Protects RPS/RC6 register access and PCU communication.
@@ -1751,8 +1751,6 @@
const struct intel_device_info info;
- int relative_constants_mode;
-
void __iomem *regs;
struct intel_uncore uncore;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 00eb481..7b203092 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4587,8 +4587,6 @@
init_waitqueue_head(&dev_priv->gpu_error.wait_queue);
init_waitqueue_head(&dev_priv->gpu_error.reset_queue);
- dev_priv->relative_constants_mode = I915_EXEC_CONSTANTS_REL_GENERAL;
-
init_waitqueue_head(&dev_priv->pending_flip_queue);
dev_priv->mm.interruptible = true;
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 0c400f8..2117f17 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -1454,10 +1454,7 @@
struct drm_i915_gem_execbuffer2 *args,
struct list_head *vmas)
{
- struct drm_i915_private *dev_priv = params->request->i915;
u64 exec_start, exec_len;
- int instp_mode;
- u32 instp_mask;
int ret;
ret = i915_gem_execbuffer_move_to_gpu(params->request, vmas);
@@ -1468,56 +1465,11 @@
if (ret)
return ret;
- instp_mode = args->flags & I915_EXEC_CONSTANTS_MASK;
- instp_mask = I915_EXEC_CONSTANTS_MASK;
- switch (instp_mode) {
- case I915_EXEC_CONSTANTS_REL_GENERAL:
- case I915_EXEC_CONSTANTS_ABSOLUTE:
- case I915_EXEC_CONSTANTS_REL_SURFACE:
- if (instp_mode != 0 && params->engine->id != RCS) {
- DRM_DEBUG("non-0 rel constants mode on non-RCS\n");
- return -EINVAL;
- }
-
- if (instp_mode != dev_priv->relative_constants_mode) {
- if (INTEL_INFO(dev_priv)->gen < 4) {
- DRM_DEBUG("no rel constants on pre-gen4\n");
- return -EINVAL;
- }
-
- if (INTEL_INFO(dev_priv)->gen > 5 &&
- instp_mode == I915_EXEC_CONSTANTS_REL_SURFACE) {
- DRM_DEBUG("rel surface constants mode invalid on gen5+\n");
- return -EINVAL;
- }
-
- /* The HW changed the meaning on this bit on gen6 */
- if (INTEL_INFO(dev_priv)->gen >= 6)
- instp_mask &= ~I915_EXEC_CONSTANTS_REL_SURFACE;
- }
- break;
- default:
- DRM_DEBUG("execbuf with unknown constants: %d\n", instp_mode);
+ if (args->flags & I915_EXEC_CONSTANTS_MASK) {
+ DRM_DEBUG("I915_EXEC_CONSTANTS_* unsupported\n");
return -EINVAL;
}
- if (params->engine->id == RCS &&
- instp_mode != dev_priv->relative_constants_mode) {
- struct intel_ring *ring = params->request->ring;
-
- ret = intel_ring_begin(params->request, 4);
- if (ret)
- return ret;
-
- intel_ring_emit(ring, MI_NOOP);
- intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
- intel_ring_emit_reg(ring, INSTPM);
- intel_ring_emit(ring, instp_mask << 16 | instp_mode);
- intel_ring_advance(ring);
-
- dev_priv->relative_constants_mode = instp_mode;
- }
-
if (args->flags & I915_EXEC_GEN7_SOL_RESET) {
ret = i915_reset_gen7_sol_offsets(params->request);
if (ret)
diff --git a/drivers/gpu/drm/i915/i915_gem_shrinker.c b/drivers/gpu/drm/i915/i915_gem_shrinker.c
index 1c237d0..755d788 100644
--- a/drivers/gpu/drm/i915/i915_gem_shrinker.c
+++ b/drivers/gpu/drm/i915/i915_gem_shrinker.c
@@ -233,7 +233,7 @@
I915_SHRINK_BOUND |
I915_SHRINK_UNBOUND |
I915_SHRINK_ACTIVE);
- rcu_barrier(); /* wait until our RCU delayed slab frees are completed */
+ synchronize_rcu(); /* wait for our earlier RCU delayed slab frees */
return freed;
}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 3fc286cd..02908e3 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -990,68 +990,51 @@
ei->media_c0 = I915_READ(VLV_MEDIA_C0_COUNT);
}
-static bool vlv_c0_above(struct drm_i915_private *dev_priv,
- const struct intel_rps_ei *old,
- const struct intel_rps_ei *now,
- int threshold)
-{
- u64 time, c0;
- unsigned int mul = 100;
-
- if (old->cz_clock == 0)
- return false;
-
- if (I915_READ(VLV_COUNTER_CONTROL) & VLV_COUNT_RANGE_HIGH)
- mul <<= 8;
-
- time = now->cz_clock - old->cz_clock;
- time *= threshold * dev_priv->czclk_freq;
-
- /* Workload can be split between render + media, e.g. SwapBuffers
- * being blitted in X after being rendered in mesa. To account for
- * this we need to combine both engines into our activity counter.
- */
- c0 = now->render_c0 - old->render_c0;
- c0 += now->media_c0 - old->media_c0;
- c0 *= mul * VLV_CZ_CLOCK_TO_MILLI_SEC;
-
- return c0 >= time;
-}
-
void gen6_rps_reset_ei(struct drm_i915_private *dev_priv)
{
- vlv_c0_read(dev_priv, &dev_priv->rps.down_ei);
- dev_priv->rps.up_ei = dev_priv->rps.down_ei;
+ memset(&dev_priv->rps.ei, 0, sizeof(dev_priv->rps.ei));
}
static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir)
{
+ const struct intel_rps_ei *prev = &dev_priv->rps.ei;
struct intel_rps_ei now;
u32 events = 0;
- if ((pm_iir & (GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED)) == 0)
+ if ((pm_iir & GEN6_PM_RP_UP_EI_EXPIRED) == 0)
return 0;
vlv_c0_read(dev_priv, &now);
if (now.cz_clock == 0)
return 0;
- if (pm_iir & GEN6_PM_RP_DOWN_EI_EXPIRED) {
- if (!vlv_c0_above(dev_priv,
- &dev_priv->rps.down_ei, &now,
- dev_priv->rps.down_threshold))
- events |= GEN6_PM_RP_DOWN_THRESHOLD;
- dev_priv->rps.down_ei = now;
+ if (prev->cz_clock) {
+ u64 time, c0;
+ unsigned int mul;
+
+ mul = VLV_CZ_CLOCK_TO_MILLI_SEC * 100; /* scale to threshold% */
+ if (I915_READ(VLV_COUNTER_CONTROL) & VLV_COUNT_RANGE_HIGH)
+ mul <<= 8;
+
+ time = now.cz_clock - prev->cz_clock;
+ time *= dev_priv->czclk_freq;
+
+ /* Workload can be split between render + media,
+ * e.g. SwapBuffers being blitted in X after being rendered in
+ * mesa. To account for this we need to combine both engines
+ * into our activity counter.
+ */
+ c0 = now.render_c0 - prev->render_c0;
+ c0 += now.media_c0 - prev->media_c0;
+ c0 *= mul;
+
+ if (c0 > time * dev_priv->rps.up_threshold)
+ events = GEN6_PM_RP_UP_THRESHOLD;
+ else if (c0 < time * dev_priv->rps.down_threshold)
+ events = GEN6_PM_RP_DOWN_THRESHOLD;
}
- if (pm_iir & GEN6_PM_RP_UP_EI_EXPIRED) {
- if (vlv_c0_above(dev_priv,
- &dev_priv->rps.up_ei, &now,
- dev_priv->rps.up_threshold))
- events |= GEN6_PM_RP_UP_THRESHOLD;
- dev_priv->rps.up_ei = now;
- }
-
+ dev_priv->rps.ei = now;
return events;
}
@@ -4490,7 +4473,7 @@
/* Let's track the enabled rps events */
if (IS_VALLEYVIEW(dev_priv))
/* WaGsvRC0ResidencyMethod:vlv */
- dev_priv->pm_rps_events = GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED;
+ dev_priv->pm_rps_events = GEN6_PM_RP_UP_EI_EXPIRED;
else
dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
@@ -4531,6 +4514,16 @@
if (!IS_GEN2(dev_priv))
dev->vblank_disable_immediate = true;
+ /* Most platforms treat the display irq block as an always-on
+ * power domain. vlv/chv can disable it at runtime and need
+ * special care to avoid writing any of the display block registers
+ * outside of the power domain. We defer setting up the display irqs
+ * in this case to the runtime pm.
+ */
+ dev_priv->display_irqs_enabled = true;
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+ dev_priv->display_irqs_enabled = false;
+
dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b9be8a6..5dc6082 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3696,10 +3696,6 @@
/* drm_atomic_helper_update_legacy_modeset_state might not be called. */
crtc->base.mode = crtc->base.state->mode;
- DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
- old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
- pipe_config->pipe_src_w, pipe_config->pipe_src_h);
-
/*
* Update pipe size and adjust fitter if needed: the reason for this is
* that in compute_mode_changes we check the native mode (not the pfit
@@ -4832,23 +4828,17 @@
struct intel_crtc_scaler_state *scaler_state =
&crtc->config->scaler_state;
- DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
-
if (crtc->config->pch_pfit.enabled) {
int id;
- if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
- DRM_ERROR("Requesting pfit without getting a scaler first\n");
+ if (WARN_ON(crtc->config->scaler_state.scaler_id < 0))
return;
- }
id = scaler_state->scaler_id;
I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
-
- DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
}
}
diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c
index 334d47b..db3afdf 100644
--- a/drivers/gpu/drm/i915/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/intel_hotplug.c
@@ -219,7 +219,7 @@
}
}
}
- if (dev_priv->display.hpd_irq_setup)
+ if (dev_priv->display_irqs_enabled && dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev_priv);
spin_unlock_irq(&dev_priv->irq_lock);
@@ -425,7 +425,7 @@
}
}
- if (storm_detected)
+ if (storm_detected && dev_priv->display_irqs_enabled)
dev_priv->display.hpd_irq_setup(dev_priv);
spin_unlock(&dev_priv->irq_lock);
@@ -471,10 +471,12 @@
* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked checks happy.
*/
- spin_lock_irq(&dev_priv->irq_lock);
- if (dev_priv->display.hpd_irq_setup)
- dev_priv->display.hpd_irq_setup(dev_priv);
- spin_unlock_irq(&dev_priv->irq_lock);
+ if (dev_priv->display_irqs_enabled && dev_priv->display.hpd_irq_setup) {
+ spin_lock_irq(&dev_priv->irq_lock);
+ if (dev_priv->display_irqs_enabled)
+ dev_priv->display.hpd_irq_setup(dev_priv);
+ spin_unlock_irq(&dev_priv->irq_lock);
+ }
}
static void i915_hpd_poll_init_work(struct work_struct *work)
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 4147e51..67db157 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -2152,42 +2152,30 @@
void intel_lr_context_resume(struct drm_i915_private *dev_priv)
{
+ struct i915_gem_context *ctx = dev_priv->kernel_context;
struct intel_engine_cs *engine;
- struct i915_gem_context *ctx;
- /* Because we emit WA_TAIL_DWORDS there may be a disparity
- * between our bookkeeping in ce->ring->head and ce->ring->tail and
- * that stored in context. As we only write new commands from
- * ce->ring->tail onwards, everything before that is junk. If the GPU
- * starts reading from its RING_HEAD from the context, it may try to
- * execute that junk and die.
- *
- * So to avoid that we reset the context images upon resume. For
- * simplicity, we just zero everything out.
- */
- list_for_each_entry(ctx, &dev_priv->context_list, link) {
- for_each_engine(engine, dev_priv) {
- struct intel_context *ce = &ctx->engine[engine->id];
- u32 *reg;
+ for_each_engine(engine, dev_priv) {
+ struct intel_context *ce = &ctx->engine[engine->id];
+ void *vaddr;
+ uint32_t *reg_state;
- if (!ce->state)
- continue;
+ if (!ce->state)
+ continue;
- reg = i915_gem_object_pin_map(ce->state->obj,
- I915_MAP_WB);
- if (WARN_ON(IS_ERR(reg)))
- continue;
+ vaddr = i915_gem_object_pin_map(ce->state->obj, I915_MAP_WB);
+ if (WARN_ON(IS_ERR(vaddr)))
+ continue;
- reg += LRC_STATE_PN * PAGE_SIZE / sizeof(*reg);
- reg[CTX_RING_HEAD+1] = 0;
- reg[CTX_RING_TAIL+1] = 0;
+ reg_state = vaddr + LRC_STATE_PN * PAGE_SIZE;
- ce->state->obj->dirty = true;
- i915_gem_object_unpin_map(ce->state->obj);
+ reg_state[CTX_RING_HEAD+1] = 0;
+ reg_state[CTX_RING_TAIL+1] = 0;
- ce->ring->head = ce->ring->tail = 0;
- ce->ring->last_retired_head = -1;
- intel_ring_update_space(ce->ring);
- }
+ ce->state->obj->dirty = true;
+ i915_gem_object_unpin_map(ce->state->obj);
+
+ ce->ring->head = 0;
+ ce->ring->tail = 0;
}
}
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index e559a45..2c6d59d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4903,6 +4903,12 @@
break;
}
+ /* When byt can survive without system hang with dynamic
+ * sw freq adjustments, this restriction can be lifted.
+ */
+ if (IS_VALLEYVIEW(dev_priv))
+ goto skip_hw_write;
+
I915_WRITE(GEN6_RP_UP_EI,
GT_INTERVAL_FROM_US(dev_priv, ei_up));
I915_WRITE(GEN6_RP_UP_THRESHOLD,
@@ -4923,6 +4929,7 @@
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
+skip_hw_write:
dev_priv->rps.power = new_power;
dev_priv->rps.up_threshold = threshold_up;
dev_priv->rps.down_threshold = threshold_down;
@@ -4933,8 +4940,9 @@
{
u32 mask = 0;
+ /* We use UP_EI_EXPIRED interupts for both up/down in manual mode */
if (val > dev_priv->rps.min_freq_softlimit)
- mask |= GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT;
+ mask |= GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT;
if (val < dev_priv->rps.max_freq_softlimit)
mask |= GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_UP_THRESHOLD;
@@ -5034,7 +5042,7 @@
{
mutex_lock(&dev_priv->rps.hw_lock);
if (dev_priv->rps.enabled) {
- if (dev_priv->pm_rps_events & (GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED))
+ if (dev_priv->pm_rps_events & GEN6_PM_RP_UP_EI_EXPIRED)
gen6_rps_reset_ei(dev_priv);
I915_WRITE(GEN6_PMINTRMSK,
gen6_rps_pm_mask(dev_priv, dev_priv->rps.cur_freq));
@@ -7960,10 +7968,10 @@
* @timeout_base_ms: timeout for polling with preemption enabled
*
* Keep resending the @request to @mbox until PCODE acknowledges it, PCODE
- * reports an error or an overall timeout of @timeout_base_ms+10 ms expires.
+ * reports an error or an overall timeout of @timeout_base_ms+50 ms expires.
* The request is acknowledged once the PCODE reply dword equals @reply after
* applying @reply_mask. Polling is first attempted with preemption enabled
- * for @timeout_base_ms and if this times out for another 10 ms with
+ * for @timeout_base_ms and if this times out for another 50 ms with
* preemption disabled.
*
* Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
@@ -7999,14 +8007,15 @@
* worst case) _and_ PCODE was busy for some reason even after a
* (queued) request and @timeout_base_ms delay. As a workaround retry
* the poll with preemption disabled to maximize the number of
- * requests. Increase the timeout from @timeout_base_ms to 10ms to
+ * requests. Increase the timeout from @timeout_base_ms to 50ms to
* account for interrupts that could reduce the number of these
- * requests.
+ * requests, and for any quirks of the PCODE firmware that delays
+ * the request completion.
*/
DRM_DEBUG_KMS("PCODE timeout, retrying with preemption disabled\n");
WARN_ON_ONCE(timeout_base_ms > 3);
preempt_disable();
- ret = wait_for_atomic(COND, 10);
+ ret = wait_for_atomic(COND, 50);
preempt_enable();
out:
diff --git a/drivers/gpu/drm/msm/sde/sde_crtc.c b/drivers/gpu/drm/msm/sde/sde_crtc.c
index db637ad..e7a867f 100644
--- a/drivers/gpu/drm/msm/sde/sde_crtc.c
+++ b/drivers/gpu/drm/msm/sde/sde_crtc.c
@@ -602,10 +602,9 @@
struct sde_crtc *sde_crtc, struct sde_crtc_mixer *mixer,
struct sde_hw_dim_layer *dim_layer)
{
+ struct sde_crtc_state *cstate;
struct sde_hw_mixer *lm;
- struct sde_rect mixer_rect;
struct sde_hw_dim_layer split_dim_layer;
- u32 mixer_width, mixer_height;
int i;
if (!dim_layer->rect.w || !dim_layer->rect.h) {
@@ -613,9 +612,7 @@
return;
}
- mixer_width = get_crtc_split_width(crtc);
- mixer_height = get_crtc_mixer_height(crtc);
- mixer_rect = (struct sde_rect) {0, 0, mixer_width, mixer_height};
+ cstate = to_sde_crtc_state(crtc->state);
split_dim_layer.stage = dim_layer->stage;
split_dim_layer.color_fill = dim_layer->color_fill;
@@ -626,17 +623,15 @@
*/
for (i = 0; i < sde_crtc->num_mixers; i++) {
split_dim_layer.flags = dim_layer->flags;
- mixer_rect.x = i * mixer_width;
- sde_kms_rect_intersect(&mixer_rect, &dim_layer->rect,
+ sde_kms_rect_intersect(&cstate->lm_bounds[i], &dim_layer->rect,
&split_dim_layer.rect);
- if (!split_dim_layer.rect.w && !split_dim_layer.rect.h) {
+ if (sde_kms_rect_is_null(&split_dim_layer.rect)) {
/*
* no extra programming required for non-intersecting
* layer mixers with INCLUSIVE dim layer
*/
- if (split_dim_layer.flags
- & SDE_DRM_DIM_LAYER_INCLUSIVE)
+ if (split_dim_layer.flags & SDE_DRM_DIM_LAYER_INCLUSIVE)
continue;
/*
@@ -646,12 +641,13 @@
*/
split_dim_layer.flags &= ~SDE_DRM_DIM_LAYER_EXCLUSIVE;
split_dim_layer.flags |= SDE_DRM_DIM_LAYER_INCLUSIVE;
- split_dim_layer.rect = (struct sde_rect) {0, 0,
- mixer_width, mixer_height};
+ memcpy(&split_dim_layer.rect, &cstate->lm_bounds[i],
+ sizeof(split_dim_layer.rect));
} else {
- split_dim_layer.rect.x = split_dim_layer.rect.x
- - (i * mixer_width);
+ split_dim_layer.rect.x =
+ split_dim_layer.rect.x -
+ cstate->lm_bounds[i].w;
}
lm = mixer[i].hw_lm;
@@ -660,6 +656,32 @@
}
}
+static void _sde_crtc_program_lm_output_roi(struct drm_crtc *crtc)
+{
+ struct sde_crtc *sde_crtc;
+ struct sde_crtc_state *crtc_state;
+ int lm_idx, lm_horiz_position;
+
+ sde_crtc = to_sde_crtc(crtc);
+ crtc_state = to_sde_crtc_state(crtc->state);
+
+ lm_horiz_position = 0;
+ for (lm_idx = 0; lm_idx < sde_crtc->num_mixers; lm_idx++) {
+ const struct sde_rect *lm_roi = &crtc_state->lm_bounds[lm_idx];
+ struct sde_hw_mixer *hw_lm = sde_crtc->mixers[lm_idx].hw_lm;
+ struct sde_hw_mixer_cfg cfg;
+
+ if (sde_kms_rect_is_null(lm_roi))
+ continue;
+
+ cfg.out_width = lm_roi->w;
+ cfg.out_height = lm_roi->h;
+ cfg.right_mixer = lm_horiz_position++;
+ cfg.flags = 0;
+ hw_lm->ops.setup_mixer_out(hw_lm, &cfg);
+ }
+}
+
static void _sde_crtc_blend_setup_mixer(struct drm_crtc *crtc,
struct sde_crtc *sde_crtc, struct sde_crtc_mixer *mixer)
{
@@ -672,13 +694,12 @@
struct sde_hw_ctl *ctl;
struct sde_hw_mixer *lm;
struct sde_hw_stage_cfg *stage_cfg;
+ struct sde_rect plane_crtc_roi;
- u32 flush_mask = 0, crtc_split_width;
- uint32_t lm_idx = LEFT_MIXER, idx;
+ u32 flush_mask = 0;
+ uint32_t lm_idx = LEFT_MIXER, stage_idx;
bool bg_alpha_enable[CRTC_DUAL_MIXERS] = {false};
- bool lm_right = false;
- int left_crtc_zpos_cnt[SDE_STAGE_MAX + 1] = {0};
- int right_crtc_zpos_cnt[SDE_STAGE_MAX + 1] = {0};
+ int zpos_cnt[CRTC_DUAL_MIXERS][SDE_STAGE_MAX + 1] = { {0} };
int i;
bool sbuf_mode = false;
u32 prefill = 0;
@@ -691,13 +712,18 @@
ctl = mixer->hw_ctl;
lm = mixer->hw_lm;
stage_cfg = &sde_crtc->stage_cfg;
- crtc_split_width = get_crtc_split_width(crtc);
+ cstate = to_sde_crtc_state(crtc->state);
drm_atomic_crtc_for_each_plane(plane, crtc) {
state = plane->state;
if (!state)
continue;
+ plane_crtc_roi.x = state->crtc_x;
+ plane_crtc_roi.y = state->crtc_y;
+ plane_crtc_roi.w = state->crtc_w;
+ plane_crtc_roi.h = state->crtc_h;
+
pstate = to_sde_plane_state(state);
fb = state->fb;
@@ -706,25 +732,6 @@
sde_plane_get_ctl_flush(plane, ctl, &flush_mask);
- /* always stage plane on either left or right lm */
- if (state->crtc_x >= crtc_split_width) {
- lm_idx = RIGHT_MIXER;
- idx = right_crtc_zpos_cnt[pstate->stage]++;
- } else {
- lm_idx = LEFT_MIXER;
- idx = left_crtc_zpos_cnt[pstate->stage]++;
- }
-
- /* stage plane on right LM if it crosses the boundary */
- lm_right = (lm_idx == LEFT_MIXER) &&
- (state->crtc_x + state->crtc_w > crtc_split_width);
-
- stage_cfg->stage[lm_idx][pstate->stage][idx] =
- sde_plane_pipe(plane);
- stage_cfg->multirect_index
- [lm_idx][pstate->stage][idx] =
- pstate->multirect_index;
- mixer[lm_idx].flush_mask |= flush_mask;
SDE_DEBUG("crtc %d stage:%d - plane %d sspp %d fb %d\n",
crtc->base.id,
@@ -738,47 +745,46 @@
SDE_EVT32(DRMID(plane), state->src_x, state->src_y,
state->src_w >> 16, state->src_h >> 16, state->crtc_x,
state->crtc_y, state->crtc_w, state->crtc_h);
- SDE_EVT32(DRMID(plane), DRMID(crtc), lm_idx, lm_right,
- pstate->stage, pstate->multirect_index,
- pstate->multirect_mode, format->base.pixel_format,
- fb ? fb->modifier[0] : 0);
- /* blend config update */
- if (pstate->stage != SDE_STAGE_BASE) {
- _sde_crtc_setup_blend_cfg(mixer + lm_idx, pstate,
- format);
+ for (lm_idx = 0; lm_idx < sde_crtc->num_mixers; lm_idx++) {
+ struct sde_rect intersect;
- if (bg_alpha_enable[lm_idx] && !format->alpha_enable)
- mixer[lm_idx].mixer_op_mode = 0;
- else
- mixer[lm_idx].mixer_op_mode |=
- 1 << pstate->stage;
- } else if (format->alpha_enable) {
- bg_alpha_enable[lm_idx] = true;
- }
+ /* skip if the roi doesn't fall within LM's bounds */
+ sde_kms_rect_intersect(&plane_crtc_roi,
+ &cstate->lm_bounds[lm_idx],
+ &intersect);
+ if (sde_kms_rect_is_null(&intersect))
+ continue;
- if (lm_right) {
- idx = right_crtc_zpos_cnt[pstate->stage]++;
- stage_cfg->stage[RIGHT_MIXER][pstate->stage][idx] =
- sde_plane_pipe(plane);
+ stage_idx = zpos_cnt[lm_idx][pstate->stage]++;
+ stage_cfg->stage[lm_idx][pstate->stage][stage_idx] =
+ sde_plane_pipe(plane);
stage_cfg->multirect_index
- [RIGHT_MIXER][pstate->stage][idx] =
- pstate->multirect_index;
- mixer[RIGHT_MIXER].flush_mask |= flush_mask;
+ [lm_idx][pstate->stage][stage_idx] =
+ pstate->multirect_index;
+
+ mixer[lm_idx].flush_mask |= flush_mask;
+
+
+ SDE_EVT32(DRMID(plane), DRMID(crtc), lm_idx, stage_idx,
+ pstate->stage, pstate->multirect_index,
+ pstate->multirect_mode,
+ format->base.pixel_format,
+ fb ? fb->modifier[0] : 0);
/* blend config update */
if (pstate->stage != SDE_STAGE_BASE) {
- _sde_crtc_setup_blend_cfg(mixer + RIGHT_MIXER,
- pstate, format);
+ _sde_crtc_setup_blend_cfg(mixer + lm_idx,
+ pstate, format);
- if (bg_alpha_enable[RIGHT_MIXER] &&
+ if (bg_alpha_enable[lm_idx] &&
!format->alpha_enable)
- mixer[RIGHT_MIXER].mixer_op_mode = 0;
+ mixer[lm_idx].mixer_op_mode = 0;
else
- mixer[RIGHT_MIXER].mixer_op_mode |=
+ mixer[lm_idx].mixer_op_mode |=
1 << pstate->stage;
} else if (format->alpha_enable) {
- bg_alpha_enable[RIGHT_MIXER] = true;
+ bg_alpha_enable[lm_idx] = true;
}
}
}
@@ -804,6 +810,8 @@
ctl->ops.setup_sbuf_cfg(ctl, &cstate->sbuf_cfg);
}
+
+ _sde_crtc_program_lm_output_roi(crtc);
}
/**
@@ -1296,9 +1304,44 @@
_sde_crtc_setup_mixer_for_encoder(crtc, enc);
}
+
mutex_unlock(&sde_crtc->crtc_lock);
}
+static void _sde_crtc_setup_lm_bounds(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ struct sde_crtc *sde_crtc;
+ struct sde_crtc_state *cstate;
+ struct drm_display_mode *adj_mode;
+ u32 crtc_split_width;
+ int i;
+
+ if (!crtc || !state) {
+ SDE_ERROR("invalid args\n");
+ return;
+ }
+
+ sde_crtc = to_sde_crtc(crtc);
+ cstate = to_sde_crtc_state(state);
+
+ adj_mode = &state->adjusted_mode;
+ crtc_split_width = sde_crtc_mixer_width(sde_crtc, adj_mode);
+
+ for (i = 0; i < sde_crtc->num_mixers; i++) {
+ struct sde_rect *lm_bound = &cstate->lm_bounds[i];
+
+ lm_bound->x = crtc_split_width * i;
+ lm_bound->y = 0;
+ lm_bound->w = crtc_split_width;
+ lm_bound->h = adj_mode->vdisplay;
+ SDE_EVT32(DRMID(crtc), i, lm_bound->x, lm_bound->y,
+ lm_bound->w, lm_bound->h);
+ }
+
+ drm_mode_debug_printmodeline(adj_mode);
+}
+
static void sde_crtc_atomic_begin(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
@@ -1326,6 +1369,8 @@
if (!sde_crtc->num_mixers)
_sde_crtc_setup_mixers(crtc);
+ _sde_crtc_setup_lm_bounds(crtc, crtc->state);
+
if (sde_crtc->event) {
WARN_ON(sde_crtc->event);
} else {
@@ -1776,13 +1821,10 @@
static void sde_crtc_enable(struct drm_crtc *crtc)
{
struct sde_crtc *sde_crtc;
- struct sde_crtc_mixer *mixer;
- struct sde_hw_mixer *lm;
- struct drm_display_mode *mode;
struct drm_encoder *encoder;
unsigned long flags;
struct sde_crtc_irq_info *node = NULL;
- int i, ret;
+ int ret;
if (!crtc) {
SDE_ERROR("invalid crtc\n");
@@ -1791,16 +1833,7 @@
SDE_DEBUG("crtc%d\n", crtc->base.id);
SDE_EVT32(DRMID(crtc));
-
sde_crtc = to_sde_crtc(crtc);
- mixer = sde_crtc->mixers;
-
- if (WARN_ON(!crtc->state))
- return;
-
- mode = &crtc->state->adjusted_mode;
-
- drm_mode_debug_printmodeline(mode);
drm_for_each_encoder(encoder, crtc->dev) {
if (encoder->crtc != crtc)
@@ -1809,15 +1842,6 @@
sde_crtc_frame_event_cb, (void *)crtc);
}
- for (i = 0; i < sde_crtc->num_mixers; i++) {
- lm = mixer[i].hw_lm;
- lm->cfg.out_width = sde_crtc_mixer_width(sde_crtc, mode);
- lm->cfg.out_height = mode->vdisplay;
- lm->cfg.right_mixer = (i == 0) ? false : true;
- lm->cfg.flags = 0;
- lm->ops.setup_mixer_out(lm, &lm->cfg);
- }
-
spin_lock_irqsave(&sde_crtc->spin_lock, flags);
list_for_each_entry(node, &sde_crtc->user_event_list, list) {
ret = 0;
@@ -1894,6 +1918,8 @@
mixer_width = sde_crtc_mixer_width(sde_crtc, mode);
+ _sde_crtc_setup_lm_bounds(crtc, state);
+
/* get plane state for all drm planes associated with crtc state */
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) {
if (IS_ERR_OR_NULL(pstate)) {
diff --git a/drivers/gpu/drm/msm/sde/sde_crtc.h b/drivers/gpu/drm/msm/sde/sde_crtc.h
index 19ae27f..36231d4 100644
--- a/drivers/gpu/drm/msm/sde/sde_crtc.h
+++ b/drivers/gpu/drm/msm/sde/sde_crtc.h
@@ -108,7 +108,7 @@
* @name : ASCII description of this crtc
* @num_ctls : Number of ctl paths in use
* @num_mixers : Number of mixers in use
- * @mixer : List of active mixers
+ * @mixers : List of active mixers
* @event : Pointer to last received drm vblank event. If there is a
* pending vblank event, this will be non-null.
* @vsync_count : Running count of received vsync events
@@ -248,6 +248,8 @@
* @num_connectors: Number of associated drm connectors
* @intf_mode : Interface mode of the primary connector
* @rsc_client : sde rsc client when mode is valid
+ * @lm_bounds : LM boundaries based on current mode full resolution, no ROI.
+ * Origin top left of CRTC.
* @property_values: Current crtc property values
* @input_fence_timeout_ns : Cached input fence timeout, in ns
* @property_blobs: Reference pointers for blob properties
@@ -267,6 +269,8 @@
struct sde_rsc_client *rsc_client;
bool rsc_update;
+ struct sde_rect lm_bounds[CRTC_DUAL_MIXERS];
+
uint64_t property_values[CRTC_PROP_COUNT];
uint64_t input_fence_timeout_ns;
struct drm_property_blob *property_blobs[CRTC_PROP_COUNT];
@@ -303,30 +307,6 @@
mode->hdisplay / CRTC_DUAL_MIXERS : mode->hdisplay;
}
-static inline uint32_t get_crtc_split_width(struct drm_crtc *crtc)
-{
- struct drm_display_mode *mode;
- struct sde_crtc *sde_crtc;
-
- if (!crtc || !crtc->state)
- return 0;
-
- sde_crtc = to_sde_crtc(crtc);
- mode = &crtc->state->adjusted_mode;
- return sde_crtc_mixer_width(sde_crtc, mode);
-}
-
-static inline uint32_t get_crtc_mixer_height(struct drm_crtc *crtc)
-{
- struct drm_display_mode *mode;
-
- if (!crtc || !crtc->state)
- return 0;
-
- mode = &crtc->state->adjusted_mode;
- return mode->vdisplay;
-}
-
/**
* sde_crtc_vblank - enable or disable vblanks for this crtc
* @crtc: Pointer to drm crtc object
diff --git a/drivers/gpu/msm/adreno_a6xx_snapshot.c b/drivers/gpu/msm/adreno_a6xx_snapshot.c
index e501a68..b5d7fe1 100644
--- a/drivers/gpu/msm/adreno_a6xx_snapshot.c
+++ b/drivers/gpu/msm/adreno_a6xx_snapshot.c
@@ -126,31 +126,31 @@
ARRAY_SIZE(a6xx_sp_vs_hlsq_cluster) / 2 },
{ CP_CLUSTER_SP_VS, 0x0002A000, 0x21, a6xx_sp_vs_sp_cluster,
ARRAY_SIZE(a6xx_sp_vs_sp_cluster) / 2 },
- { CP_CLUSTER_SP_VS, 0x0002EC00, 0x41, a6xx_hlsq_duplicate_cluster,
+ { CP_CLUSTER_SP_VS, 0x0002E000, 0x41, a6xx_hlsq_duplicate_cluster,
ARRAY_SIZE(a6xx_hlsq_duplicate_cluster) / 2 },
{ CP_CLUSTER_SP_VS, 0x0002F000, 0x45, a6xx_hlsq_2d_duplicate_cluster,
ARRAY_SIZE(a6xx_hlsq_2d_duplicate_cluster) / 2 },
- { CP_CLUSTER_SP_VS, 0x0002AC00, 0x21, a6xx_sp_duplicate_cluster,
+ { CP_CLUSTER_SP_VS, 0x0002A000, 0x21, a6xx_sp_duplicate_cluster,
ARRAY_SIZE(a6xx_sp_duplicate_cluster) / 2 },
- { CP_CLUSTER_SP_VS, 0x0002CC00, 0x1, a6xx_tp_duplicate_cluster,
+ { CP_CLUSTER_SP_VS, 0x0002C000, 0x1, a6xx_tp_duplicate_cluster,
ARRAY_SIZE(a6xx_tp_duplicate_cluster) / 2 },
- { CP_CLUSTER_SP_PS, 0x0002E600, 0x42, a6xx_sp_ps_hlsq_cluster,
+ { CP_CLUSTER_SP_PS, 0x0002E000, 0x42, a6xx_sp_ps_hlsq_cluster,
ARRAY_SIZE(a6xx_sp_ps_hlsq_cluster) / 2 },
- { CP_CLUSTER_SP_PS, 0x0002F300, 0x46, a6xx_sp_ps_hlsq_2d_cluster,
+ { CP_CLUSTER_SP_PS, 0x0002F000, 0x46, a6xx_sp_ps_hlsq_2d_cluster,
ARRAY_SIZE(a6xx_sp_ps_hlsq_2d_cluster) / 2 },
- { CP_CLUSTER_SP_PS, 0x0002A600, 0x22, a6xx_sp_ps_sp_cluster,
+ { CP_CLUSTER_SP_PS, 0x0002A000, 0x22, a6xx_sp_ps_sp_cluster,
ARRAY_SIZE(a6xx_sp_ps_sp_cluster) / 2 },
- { CP_CLUSTER_SP_PS, 0x0002B300, 0x26, a6xx_sp_ps_sp_2d_cluster,
+ { CP_CLUSTER_SP_PS, 0x0002B000, 0x26, a6xx_sp_ps_sp_2d_cluster,
ARRAY_SIZE(a6xx_sp_ps_sp_2d_cluster) / 2 },
- { CP_CLUSTER_SP_PS, 0x0002C600, 0x2, a6xx_sp_ps_tp_cluster,
+ { CP_CLUSTER_SP_PS, 0x0002C000, 0x2, a6xx_sp_ps_tp_cluster,
ARRAY_SIZE(a6xx_sp_ps_tp_cluster) / 2 },
- { CP_CLUSTER_SP_PS, 0x0002D300, 0x6, a6xx_sp_ps_tp_2d_cluster,
+ { CP_CLUSTER_SP_PS, 0x0002D000, 0x6, a6xx_sp_ps_tp_2d_cluster,
ARRAY_SIZE(a6xx_sp_ps_tp_2d_cluster) / 2 },
- { CP_CLUSTER_SP_PS, 0x0002EC00, 0x42, a6xx_hlsq_duplicate_cluster,
+ { CP_CLUSTER_SP_PS, 0x0002E000, 0x42, a6xx_hlsq_duplicate_cluster,
ARRAY_SIZE(a6xx_hlsq_duplicate_cluster) / 2 },
- { CP_CLUSTER_SP_VS, 0x0002AC00, 0x22, a6xx_sp_duplicate_cluster,
+ { CP_CLUSTER_SP_VS, 0x0002A000, 0x22, a6xx_sp_duplicate_cluster,
ARRAY_SIZE(a6xx_sp_duplicate_cluster) / 2 },
- { CP_CLUSTER_SP_VS, 0x0002CC00, 0x2, a6xx_tp_duplicate_cluster,
+ { CP_CLUSTER_SP_VS, 0x0002C000, 0x2, a6xx_tp_duplicate_cluster,
ARRAY_SIZE(a6xx_tp_duplicate_cluster) / 2 },
};
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
index 5d67089..af94ad7 100644
--- a/drivers/hwtracing/coresight/Makefile
+++ b/drivers/hwtracing/coresight/Makefile
@@ -22,5 +22,5 @@
obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
obj-$(CONFIG_CORESIGHT_CSR) += coresight-csr.o
obj-$(CONFIG_CORESIGHT_HWEVENT) += coresight-hwevent.o
-obj-$(CONFIG_CORESIGHT_SOURCE_DUMMY) += coresight-dummy.o
+obj-$(CONFIG_CORESIGHT_DUMMY) += coresight-dummy.o
obj-$(CONFIG_CORESIGHT_REMOTE_ETM) += coresight-remote-etm.o
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index d4f3239..f283b71 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -64,6 +64,7 @@
int irq;
struct i2c_adapter adapter;
struct completion completion;
+ struct i2c_msg *curr_msg;
u32 msg_err;
u8 *msg_buf;
size_t msg_buf_remaining;
@@ -126,14 +127,13 @@
return IRQ_HANDLED;
}
- if (val & BCM2835_I2C_S_RXD) {
- bcm2835_drain_rxfifo(i2c_dev);
- if (!(val & BCM2835_I2C_S_DONE))
- return IRQ_HANDLED;
- }
-
if (val & BCM2835_I2C_S_DONE) {
- if (i2c_dev->msg_buf_remaining)
+ if (i2c_dev->curr_msg->flags & I2C_M_RD) {
+ bcm2835_drain_rxfifo(i2c_dev);
+ val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
+ }
+
+ if ((val & BCM2835_I2C_S_RXD) || i2c_dev->msg_buf_remaining)
i2c_dev->msg_err = BCM2835_I2C_S_LEN;
else
i2c_dev->msg_err = 0;
@@ -141,11 +141,16 @@
return IRQ_HANDLED;
}
- if (val & BCM2835_I2C_S_TXD) {
+ if (val & BCM2835_I2C_S_TXW) {
bcm2835_fill_txfifo(i2c_dev);
return IRQ_HANDLED;
}
+ if (val & BCM2835_I2C_S_RXR) {
+ bcm2835_drain_rxfifo(i2c_dev);
+ return IRQ_HANDLED;
+ }
+
return IRQ_NONE;
}
@@ -155,6 +160,7 @@
u32 c;
unsigned long time_left;
+ i2c_dev->curr_msg = msg;
i2c_dev->msg_buf = msg->buf;
i2c_dev->msg_buf_remaining = msg->len;
reinit_completion(&i2c_dev->completion);
diff --git a/drivers/media/platform/msm/vidc/msm_vidc.c b/drivers/media/platform/msm/vidc/msm_vidc.c
index d3af24e..f160582 100644
--- a/drivers/media/platform/msm/vidc/msm_vidc.c
+++ b/drivers/media/platform/msm/vidc/msm_vidc.c
@@ -1428,18 +1428,9 @@
* - v4l2 client issues CONTINUE to firmware to resume decoding of
* submitted ETBs.
*/
- if (inst->in_reconfig) {
- dprintk(VIDC_DBG, "send session_continue after reconfig\n");
- rc = call_hfi_op(hdev, session_continue,
- (void *) inst->session);
- if (rc) {
- dprintk(VIDC_ERR,
- "%s - failed to send session_continue\n",
- __func__);
- goto fail_start;
- }
- }
- inst->in_reconfig = false;
+ rc = msm_comm_session_continue(inst);
+ if (rc)
+ goto fail_start;
msm_comm_scale_clocks_and_bus(inst);
diff --git a/drivers/media/platform/msm/vidc/msm_vidc_common.c b/drivers/media/platform/msm/vidc/msm_vidc_common.c
index 8f77ebb..78e499b 100644
--- a/drivers/media/platform/msm/vidc/msm_vidc_common.c
+++ b/drivers/media/platform/msm/vidc/msm_vidc_common.c
@@ -1167,53 +1167,70 @@
static void msm_vidc_comm_update_ctrl_limits(struct msm_vidc_inst *inst)
{
- msm_vidc_comm_update_ctrl(inst,
- V4L2_CID_MPEG_VIDC_VIDEO_HYBRID_HIERP_MODE,
- &inst->capability.hier_p_hybrid);
- msm_vidc_comm_update_ctrl(inst,
- V4L2_CID_MPEG_VIDC_VIDEO_HIER_B_NUM_LAYERS,
- &inst->capability.hier_b);
- msm_vidc_comm_update_ctrl(inst,
- V4L2_CID_MPEG_VIDC_VIDEO_HIER_P_NUM_LAYERS,
- &inst->capability.hier_p);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDEO_BITRATE,
- &inst->capability.bitrate);
- msm_vidc_comm_update_ctrl(inst,
- V4L2_CID_MPEG_VIDC_VENC_PARAM_LAYER_BITRATE,
- &inst->capability.bitrate);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
- &inst->capability.peakbitrate);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_I_FRAME_QP,
- &inst->capability.i_qp);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_P_FRAME_QP,
- &inst->capability.p_qp);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_B_FRAME_QP,
- &inst->capability.b_qp);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_I_FRAME_QP_MIN,
- &inst->capability.i_qp);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_P_FRAME_QP_MIN,
- &inst->capability.p_qp);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_B_FRAME_QP_MIN,
- &inst->capability.b_qp);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_I_FRAME_QP_MAX,
- &inst->capability.i_qp);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_P_FRAME_QP_MAX,
- &inst->capability.p_qp);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_B_FRAME_QP_MAX,
- &inst->capability.b_qp);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_BLUR_WIDTH,
- &inst->capability.blur_width);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_BLUR_HEIGHT,
- &inst->capability.blur_height);
- msm_vidc_comm_update_ctrl(inst,
- V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES,
- &inst->capability.slice_bytes);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB,
- &inst->capability.slice_mbs);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_LTRCOUNT,
- &inst->capability.ltr_count);
- msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDC_VIDEO_NUM_B_FRAMES,
- &inst->capability.bframe);
+ if (inst->session_type == MSM_VIDC_ENCODER) {
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_HYBRID_HIERP_MODE,
+ &inst->capability.hier_p_hybrid);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_HIER_B_NUM_LAYERS,
+ &inst->capability.hier_b);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_HIER_P_NUM_LAYERS,
+ &inst->capability.hier_p);
+ msm_vidc_comm_update_ctrl(inst, V4L2_CID_MPEG_VIDEO_BITRATE,
+ &inst->capability.bitrate);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VENC_PARAM_LAYER_BITRATE,
+ &inst->capability.bitrate);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
+ &inst->capability.peakbitrate);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_I_FRAME_QP,
+ &inst->capability.i_qp);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_P_FRAME_QP,
+ &inst->capability.p_qp);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_B_FRAME_QP,
+ &inst->capability.b_qp);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_I_FRAME_QP_MIN,
+ &inst->capability.i_qp);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_P_FRAME_QP_MIN,
+ &inst->capability.p_qp);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_B_FRAME_QP_MIN,
+ &inst->capability.b_qp);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_I_FRAME_QP_MAX,
+ &inst->capability.i_qp);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_P_FRAME_QP_MAX,
+ &inst->capability.p_qp);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_B_FRAME_QP_MAX,
+ &inst->capability.b_qp);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_BLUR_WIDTH,
+ &inst->capability.blur_width);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_BLUR_HEIGHT,
+ &inst->capability.blur_height);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES,
+ &inst->capability.slice_bytes);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB,
+ &inst->capability.slice_mbs);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_LTRCOUNT,
+ &inst->capability.ltr_count);
+ msm_vidc_comm_update_ctrl(inst,
+ V4L2_CID_MPEG_VIDC_VIDEO_NUM_B_FRAMES,
+ &inst->capability.bframe);
+ }
}
static void handle_session_init_done(enum hal_command_response cmd, void *data)
@@ -1361,7 +1378,7 @@
switch (event_notify->hal_event_type) {
case HAL_EVENT_SEQ_CHANGED_SUFFICIENT_RESOURCES:
- event = V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT;
+ event = V4L2_EVENT_SEQ_CHANGED_SUFFICIENT;
break;
case HAL_EVENT_SEQ_CHANGED_INSUFFICIENT_RESOURCES:
event = V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT;
@@ -1434,18 +1451,17 @@
}
/* Bit depth and pic struct changed event are combined into a single
- * event (insufficient event) for the userspace. Currently bitdepth
- * changes is only for HEVC and interlaced support is for all
- * codecs except HEVC
- * event data is now as follows:
- * u32 *ptr = seq_changed_event.u.data;
- * ptr[0] = height
- * ptr[1] = width
- * ptr[2] = flag to indicate bit depth or/and pic struct changed
- * ptr[3] = bit depth
- * ptr[4] = pic struct (progressive or interlaced)
- * ptr[5] = colour space
- */
+ * event (insufficient event) for the userspace. Currently bitdepth
+ * changes is only for HEVC and interlaced support is for all
+ * codecs except HEVC
+ * event data is now as follows:
+ * u32 *ptr = seq_changed_event.u.data;
+ * ptr[0] = height
+ * ptr[1] = width
+ * ptr[2] = bit depth
+ * ptr[3] = pic struct (progressive or interlaced)
+ * ptr[4] = colour space
+ */
inst->entropy_mode = msm_comm_hal_to_v4l2(
V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE,
@@ -1458,55 +1474,35 @@
event_notify->level);
ptr = (u32 *)seq_changed_event.u.data;
+ ptr[0] = event_notify->height;
+ ptr[1] = event_notify->width;
+ ptr[2] = event_notify->bit_depth;
+ ptr[3] = event_notify->pic_struct;
+ ptr[4] = event_notify->colour_space;
- if (ptr != NULL) {
- ptr[2] = 0x0;
- ptr[3] = inst->bit_depth;
- ptr[4] = inst->pic_struct;
- ptr[5] = inst->colour_space;
+ dprintk(VIDC_DBG,
+ "Event payload: height = %d width = %d\n",
+ event_notify->height, event_notify->width);
- if (inst->bit_depth != event_notify->bit_depth) {
- inst->bit_depth = event_notify->bit_depth;
- ptr[2] |= V4L2_EVENT_BITDEPTH_FLAG;
- ptr[3] = inst->bit_depth;
- event = V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT;
- dprintk(VIDC_DBG,
- "V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT due to bit-depth change\n");
- }
+ dprintk(VIDC_DBG,
+ "Event payload: bit_depth = %d pic_struct = %d colour_space = %d\n",
+ event_notify->bit_depth, event_notify->pic_struct,
+ event_notify->colour_space);
- if (inst->pic_struct != event_notify->pic_struct) {
- inst->pic_struct = event_notify->pic_struct;
- event = V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT;
- ptr[2] |= V4L2_EVENT_PICSTRUCT_FLAG;
- ptr[4] = inst->pic_struct;
- dprintk(VIDC_DBG,
- "V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT due to pic-struct change\n");
- }
-
- if (inst->bit_depth == MSM_VIDC_BIT_DEPTH_10
- && inst->colour_space !=
- event_notify->colour_space) {
- inst->colour_space = event_notify->colour_space;
- event = V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT;
- ptr[2] |= V4L2_EVENT_COLOUR_SPACE_FLAG;
- ptr[5] = inst->colour_space;
- dprintk(VIDC_DBG,
- "V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT due to colour space change\n");
- }
-
- }
+ mutex_lock(&inst->lock);
+ inst->in_reconfig = true;
+ inst->reconfig_height = event_notify->height;
+ inst->reconfig_width = event_notify->width;
+ mutex_unlock(&inst->lock);
if (event == V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT) {
dprintk(VIDC_DBG, "V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT\n");
- inst->reconfig_height = event_notify->height;
- inst->reconfig_width = event_notify->width;
- inst->in_reconfig = true;
} else {
dprintk(VIDC_DBG, "V4L2_EVENT_SEQ_CHANGED_SUFFICIENT\n");
dprintk(VIDC_DBG,
- "event_notify->height = %d event_notify->width = %d\n",
- event_notify->height,
- event_notify->width);
+ "event_notify->height = %d event_notify->width = %d\n",
+ event_notify->height,
+ event_notify->width);
inst->prop.height[OUTPUT_PORT] = event_notify->height;
inst->prop.width[OUTPUT_PORT] = event_notify->width;
}
@@ -1514,13 +1510,6 @@
rc = msm_vidc_check_session_supported(inst);
if (!rc) {
seq_changed_event.type = event;
- if (event == V4L2_EVENT_SEQ_CHANGED_INSUFFICIENT) {
- u32 *ptr = NULL;
-
- ptr = (u32 *)seq_changed_event.u.data;
- ptr[0] = event_notify->height;
- ptr[1] = event_notify->width;
- }
v4l2_event_queue_fh(&inst->event_handler, &seq_changed_event);
} else if (rc == -ENOTSUPP) {
msm_vidc_queue_v4l2_event(inst,
@@ -3651,6 +3640,11 @@
}
break;
}
+ case V4L2_QCOM_CMD_SESSION_CONTINUE:
+ {
+ rc = msm_comm_session_continue(inst);
+ break;
+ }
default:
dprintk(VIDC_ERR, "Unknown Command %d\n", which_cmd);
rc = -ENOTSUPP;
@@ -5462,3 +5456,36 @@
}
mutex_unlock(&core->lock);
}
+
+int msm_comm_session_continue(void *instance)
+{
+ struct msm_vidc_inst *inst = instance;
+ int rc = 0;
+ struct hfi_device *hdev;
+
+ if (!inst || !inst->core || !inst->core->device)
+ return -EINVAL;
+ hdev = inst->core->device;
+ mutex_lock(&inst->lock);
+ if (inst->session_type == MSM_VIDC_DECODER && inst->in_reconfig) {
+ dprintk(VIDC_DBG, "send session_continue\n");
+ rc = call_hfi_op(hdev, session_continue,
+ (void *)inst->session);
+ if (rc) {
+ dprintk(VIDC_ERR,
+ "failed to send session_continue\n");
+ rc = -EINVAL;
+ goto sess_continue_fail;
+ }
+ inst->in_reconfig = false;
+ } else if (inst->session_type == MSM_VIDC_ENCODER) {
+ dprintk(VIDC_DBG,
+ "session_continue not supported for encoder");
+ } else {
+ dprintk(VIDC_ERR,
+ "session_continue called in wrong state for decoder");
+ }
+sess_continue_fail:
+ mutex_unlock(&inst->lock);
+ return rc;
+}
diff --git a/drivers/media/platform/msm/vidc/msm_vidc_common.h b/drivers/media/platform/msm/vidc/msm_vidc_common.h
index 39a28b3..9c7eec5 100644
--- a/drivers/media/platform/msm/vidc/msm_vidc_common.h
+++ b/drivers/media/platform/msm/vidc/msm_vidc_common.h
@@ -97,4 +97,5 @@
void msm_comm_print_inst_info(struct msm_vidc_inst *inst);
int msm_comm_v4l2_to_hal(int id, int value);
int msm_comm_hal_to_v4l2(int id, int value);
+int msm_comm_session_continue(void *instance);
#endif
diff --git a/drivers/media/platform/msm/vidc/venus_hfi.c b/drivers/media/platform/msm/vidc/venus_hfi.c
index b56fd14..bfe3790 100644
--- a/drivers/media/platform/msm/vidc/venus_hfi.c
+++ b/drivers/media/platform/msm/vidc/venus_hfi.c
@@ -3386,6 +3386,7 @@
static inline void __disable_unprepare_clks(struct venus_hfi_device *device)
{
struct clock_info *cl;
+ int rc = 0;
if (!device) {
dprintk(VIDC_ERR, "Invalid params: %pK\n", device);
@@ -3395,6 +3396,18 @@
venus_hfi_for_each_clock_reverse(device, cl) {
dprintk(VIDC_DBG, "Clock: %s disable and unprepare\n",
cl->name);
+ rc = clk_set_flags(cl->clk, CLKFLAG_NORETAIN_PERIPH);
+ if (rc) {
+ dprintk(VIDC_WARN,
+ "Failed set flag NORETAIN_PERIPH %s\n",
+ cl->name);
+ }
+ rc = clk_set_flags(cl->clk, CLKFLAG_NORETAIN_MEM);
+ if (rc) {
+ dprintk(VIDC_WARN,
+ "Failed set flag NORETAIN_MEM %s\n",
+ cl->name);
+ }
clk_disable_unprepare(cl->clk);
}
}
@@ -3418,22 +3431,18 @@
if (cl->has_scaling)
clk_set_rate(cl->clk, clk_round_rate(cl->clk, 0));
- if (cl->has_mem_retention) {
- rc = clk_set_flags(cl->clk, CLKFLAG_NORETAIN_PERIPH);
- if (rc) {
- dprintk(VIDC_WARN,
- "Failed set flag NORETAIN_PERIPH %s\n",
+ rc = clk_set_flags(cl->clk, CLKFLAG_RETAIN_PERIPH);
+ if (rc) {
+ dprintk(VIDC_WARN,
+ "Failed set flag RETAIN_PERIPH %s\n",
cl->name);
- }
-
- rc = clk_set_flags(cl->clk, CLKFLAG_NORETAIN_MEM);
- if (rc) {
- dprintk(VIDC_WARN,
- "Failed set flag NORETAIN_MEM %s\n",
- cl->name);
- }
}
-
+ rc = clk_set_flags(cl->clk, CLKFLAG_RETAIN_MEM);
+ if (rc) {
+ dprintk(VIDC_WARN,
+ "Failed set flag RETAIN_MEM %s\n",
+ cl->name);
+ }
rc = clk_prepare_enable(cl->clk);
if (rc) {
dprintk(VIDC_ERR, "Failed to enable clocks\n");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 47096fd..744e520 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1523,7 +1523,7 @@
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
/* Wait max 20 ms */
- timeout = 20000;
+ timeout = 20;
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
@@ -1533,9 +1533,7 @@
return;
}
timeout--;
- spin_unlock_irq(&host->lock);
usleep_range(900, 1100);
- spin_lock_irq(&host->lock);
}
clk |= SDHCI_CLOCK_CARD_EN;
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index 3779475..283ff7e 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -229,12 +229,10 @@
last_trx_part = curr_part - 1;
- /*
- * We have whole TRX scanned, skip to the next part. Use
- * roundown (not roundup), as the loop will increase
- * offset in next step.
- */
- offset = rounddown(offset + trx->length, blocksize);
+ /* Jump to the end of TRX */
+ offset = roundup(offset + trx->length, blocksize);
+ /* Next loop iteration will increase the offset */
+ offset -= blocksize;
continue;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c
index a849da9..6b86353 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cq.c
@@ -101,13 +101,19 @@
{
struct mlx4_cq *cq;
+ rcu_read_lock();
cq = radix_tree_lookup(&mlx4_priv(dev)->cq_table.tree,
cqn & (dev->caps.num_cqs - 1));
+ rcu_read_unlock();
+
if (!cq) {
mlx4_dbg(dev, "Completion event for bogus CQ %08x\n", cqn);
return;
}
+ /* Acessing the CQ outside of rcu_read_lock is safe, because
+ * the CQ is freed only after interrupt handling is completed.
+ */
++cq->arm_sn;
cq->comp(cq);
@@ -118,23 +124,19 @@
struct mlx4_cq_table *cq_table = &mlx4_priv(dev)->cq_table;
struct mlx4_cq *cq;
- spin_lock(&cq_table->lock);
-
+ rcu_read_lock();
cq = radix_tree_lookup(&cq_table->tree, cqn & (dev->caps.num_cqs - 1));
- if (cq)
- atomic_inc(&cq->refcount);
-
- spin_unlock(&cq_table->lock);
+ rcu_read_unlock();
if (!cq) {
- mlx4_warn(dev, "Async event for bogus CQ %08x\n", cqn);
+ mlx4_dbg(dev, "Async event for bogus CQ %08x\n", cqn);
return;
}
+ /* Acessing the CQ outside of rcu_read_lock is safe, because
+ * the CQ is freed only after interrupt handling is completed.
+ */
cq->event(cq, event_type);
-
- if (atomic_dec_and_test(&cq->refcount))
- complete(&cq->free);
}
static int mlx4_SW2HW_CQ(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox,
@@ -301,9 +303,9 @@
if (err)
return err;
- spin_lock_irq(&cq_table->lock);
+ spin_lock(&cq_table->lock);
err = radix_tree_insert(&cq_table->tree, cq->cqn, cq);
- spin_unlock_irq(&cq_table->lock);
+ spin_unlock(&cq_table->lock);
if (err)
goto err_icm;
@@ -349,9 +351,9 @@
return 0;
err_radix:
- spin_lock_irq(&cq_table->lock);
+ spin_lock(&cq_table->lock);
radix_tree_delete(&cq_table->tree, cq->cqn);
- spin_unlock_irq(&cq_table->lock);
+ spin_unlock(&cq_table->lock);
err_icm:
mlx4_cq_free_icm(dev, cq->cqn);
@@ -370,15 +372,15 @@
if (err)
mlx4_warn(dev, "HW2SW_CQ failed (%d) for CQN %06x\n", err, cq->cqn);
+ spin_lock(&cq_table->lock);
+ radix_tree_delete(&cq_table->tree, cq->cqn);
+ spin_unlock(&cq_table->lock);
+
synchronize_irq(priv->eq_table.eq[MLX4_CQ_TO_EQ_VECTOR(cq->vector)].irq);
if (priv->eq_table.eq[MLX4_CQ_TO_EQ_VECTOR(cq->vector)].irq !=
priv->eq_table.eq[MLX4_EQ_ASYNC].irq)
synchronize_irq(priv->eq_table.eq[MLX4_EQ_ASYNC].irq);
- spin_lock_irq(&cq_table->lock);
- radix_tree_delete(&cq_table->tree, cq->cqn);
- spin_unlock_irq(&cq_table->lock);
-
if (atomic_dec_and_test(&cq->refcount))
complete(&cq->free);
wait_for_completion(&cq->free);
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index 4d3ddc2..5d48458 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -444,8 +444,14 @@
ring->cqn = priv->rx_cq[ring_ind]->mcq.cqn;
ring->stride = stride;
- if (ring->stride <= TXBB_SIZE)
+ if (ring->stride <= TXBB_SIZE) {
+ /* Stamp first unused send wqe */
+ __be32 *ptr = (__be32 *)ring->buf;
+ __be32 stamp = cpu_to_be32(1 << STAMP_SHIFT);
+ *ptr = stamp;
+ /* Move pointer to start of rx section */
ring->buf += TXBB_SIZE;
+ }
ring->log_stride = ffs(ring->stride) - 1;
ring->buf_size = ring->size * ring->stride;
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index c548bea..32f76bf 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -2980,6 +2980,9 @@
put_res(dev, slave, srqn, RES_SRQ);
qp->srq = srq;
}
+
+ /* Save param3 for dynamic changes from VST back to VGT */
+ qp->param3 = qpc->param3;
put_res(dev, slave, rcqn, RES_CQ);
put_res(dev, slave, mtt_base, RES_MTT);
res_end_move(dev, slave, RES_QP, qpn);
@@ -3772,7 +3775,6 @@
int qpn = vhcr->in_modifier & 0x7fffff;
struct res_qp *qp;
u8 orig_sched_queue;
- __be32 orig_param3 = qpc->param3;
u8 orig_vlan_control = qpc->pri_path.vlan_control;
u8 orig_fvl_rx = qpc->pri_path.fvl_rx;
u8 orig_pri_path_fl = qpc->pri_path.fl;
@@ -3814,7 +3816,6 @@
*/
if (!err) {
qp->sched_queue = orig_sched_queue;
- qp->param3 = orig_param3;
qp->vlan_control = orig_vlan_control;
qp->fvl_rx = orig_fvl_rx;
qp->pri_path_fl = orig_pri_path_fl;
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index 4e0c565..b7273be 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1422,7 +1422,7 @@
cancel_work_sync(&rt2x00dev->intf_work);
cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
cancel_work_sync(&rt2x00dev->sleep_work);
-#ifdef CONFIG_RT2X00_LIB_USB
+#if IS_ENABLED(CONFIG_RT2X00_LIB_USB)
if (rt2x00_is_usb(rt2x00dev)) {
usb_kill_anchored_urbs(rt2x00dev->anchor);
hrtimer_cancel(&rt2x00dev->txstatus_timer);
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
index 6005e14..662705e 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
@@ -319,10 +319,8 @@
entry->skb->data, length,
rt2x00usb_interrupt_txdone, entry);
- usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
if (status) {
- usb_unanchor_urb(entry_priv->urb);
if (status == -ENODEV)
clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
@@ -410,10 +408,8 @@
entry->skb->data, entry->skb->len,
rt2x00usb_interrupt_rxdone, entry);
- usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
if (status) {
- usb_unanchor_urb(entry_priv->urb);
if (status == -ENODEV)
clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
@@ -824,10 +820,6 @@
if (retval)
goto exit_free_device;
- retval = rt2x00lib_probe_dev(rt2x00dev);
- if (retval)
- goto exit_free_reg;
-
rt2x00dev->anchor = devm_kmalloc(&usb_dev->dev,
sizeof(struct usb_anchor),
GFP_KERNEL);
@@ -835,10 +827,17 @@
retval = -ENOMEM;
goto exit_free_reg;
}
-
init_usb_anchor(rt2x00dev->anchor);
+
+ retval = rt2x00lib_probe_dev(rt2x00dev);
+ if (retval)
+ goto exit_free_anchor;
+
return 0;
+exit_free_anchor:
+ usb_kill_anchored_urbs(rt2x00dev->anchor);
+
exit_free_reg:
rt2x00usb_free_reg(rt2x00dev);
diff --git a/drivers/pci/host/pci-msm.c b/drivers/pci/host/pci-msm.c
index 1e45c73..8b3216cd 100644
--- a/drivers/pci/host/pci-msm.c
+++ b/drivers/pci/host/pci-msm.c
@@ -5819,9 +5819,10 @@
struct msi_msg *msg)
{
struct iommu_domain *domain = iommu_get_domain_for_dev(&pdev->dev);
- int ret, bypass_en = 0;
+ struct iommu_domain_geometry geometry;
+ int ret, fastmap_en = 0, bypass_en = 0;
dma_addr_t iova;
- phys_addr_t pcie_base_addr, gicm_db_offset;
+ phys_addr_t gicm_db_offset;
msg->address_hi = 0;
msg->address_lo = dev->msi_gicm_addr;
@@ -5843,16 +5844,25 @@
if (bypass_en)
return 0;
- gicm_db_offset = dev->msi_gicm_addr -
- rounddown(dev->msi_gicm_addr, PAGE_SIZE);
- /*
- * Use PCIe DBI address as the IOVA since client cannot
- * use this address for their IOMMU mapping. This will
- * prevent any conflicts between PCIe host and
- * client's mapping.
- */
- pcie_base_addr = dev->res[MSM_PCIE_RES_DM_CORE].resource->start;
- iova = rounddown(pcie_base_addr, PAGE_SIZE);
+ iommu_domain_get_attr(domain, DOMAIN_ATTR_FAST, &fastmap_en);
+ if (fastmap_en) {
+ iommu_domain_get_attr(domain, DOMAIN_ATTR_GEOMETRY, &geometry);
+ iova = geometry.aperture_start;
+ PCIE_DBG(dev,
+ "PCIe: RC%d: Use client's IOVA 0x%llx to map QGIC MSI address\n",
+ dev->rc_idx, iova);
+ } else {
+ phys_addr_t pcie_base_addr;
+
+ /*
+ * Use PCIe DBI address as the IOVA since client cannot
+ * use this address for their IOMMU mapping. This will
+ * prevent any conflicts between PCIe host and
+ * client's mapping.
+ */
+ pcie_base_addr = dev->res[MSM_PCIE_RES_DM_CORE].resource->start;
+ iova = rounddown(pcie_base_addr, PAGE_SIZE);
+ }
ret = iommu_map(domain, iova, rounddown(dev->msi_gicm_addr, PAGE_SIZE),
PAGE_SIZE, IOMMU_READ | IOMMU_WRITE);
@@ -5863,6 +5873,8 @@
return -ENOMEM;
}
+ gicm_db_offset = dev->msi_gicm_addr -
+ rounddown(dev->msi_gicm_addr, PAGE_SIZE);
msg->address_lo = iova + gicm_db_offset;
return 0;
diff --git a/drivers/regulator/cprh-kbss-regulator.c b/drivers/regulator/cprh-kbss-regulator.c
index a93e7d8..b84d9f0 100644
--- a/drivers/regulator/cprh-kbss-regulator.c
+++ b/drivers/regulator/cprh-kbss-regulator.c
@@ -983,6 +983,9 @@
return -EINVAL;
}
+ vreg->fuse_corner_count = fuse_corners;
+ vreg->platform_fuses = fuse;
+
fuse->ro_sel = devm_kcalloc(vreg->thread->ctrl->dev, fuse_corners,
sizeof(*fuse->ro_sel), GFP_KERNEL);
fuse->init_voltage = devm_kcalloc(vreg->thread->ctrl->dev, fuse_corners,
@@ -1037,8 +1040,6 @@
vreg->speed_bin_fuse = fuse->speed_bin;
vreg->cpr_rev_fuse = fuse->cpr_fusing_rev;
- vreg->fuse_corner_count = fuse_corners;
- vreg->platform_fuses = fuse;
return 0;
}
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 82c4acc..602c359 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -9415,10 +9415,11 @@
/* scale up to G3 now */
new_pwr_info.gear_tx = UFS_HS_G3;
new_pwr_info.gear_rx = UFS_HS_G3;
- ret = ufshcd_change_power_mode(hba, &new_pwr_info);
- if (ret)
- goto out;
+ /* now, fall through to set the HS-G3 */
}
+ ret = ufshcd_change_power_mode(hba, &new_pwr_info);
+ if (ret)
+ goto out;
} else {
memcpy(&new_pwr_info, &hba->pwr_info,
sizeof(struct ufs_pa_layer_attr));
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 0f8d9b6..dbb7ebe 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -324,6 +324,17 @@
spcom provides clients/server API, although currently only one client
or server is allowed per logical channel.
+config MSM_SPSS_UTILS
+ depends on MSM_PIL
+ bool "Secure Processor Utilities"
+ help
+ spss-utils driver selects Secure Processor firmware file name.
+ The firmware file name for dev, test or production is selected
+ based on two fuses.
+ Different file name is used for differnt SPSS HW versions,
+ because the SPSS firmware size is too small to support multiple
+ HW versions.
+
config TRACER_PKT
bool "Tracer Packet"
help
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 00a1284..060ac04 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -31,6 +31,7 @@
obj-$(CONFIG_MSM_GLINK_SMEM_NATIVE_XPRT) += glink_smem_native_xprt.o
obj-$(CONFIG_MSM_GLINK_SPI_XPRT) += glink_spi_xprt.o
obj-$(CONFIG_MSM_SPCOM) += spcom.o
+obj-$(CONFIG_MSM_SPSS_UTILS) += spss_utils.o
obj-$(CONFIG_TRACER_PKT) += tracer_pkt.o
obj-$(CONFIG_QCOM_BUS_SCALING) += msm_bus/
obj-$(CONFIG_QTI_RPMH_API) += rpmh.o
diff --git a/drivers/soc/qcom/service-notifier.c b/drivers/soc/qcom/service-notifier.c
index 614bfd6..68592fe 100644
--- a/drivers/soc/qcom/service-notifier.c
+++ b/drivers/soc/qcom/service-notifier.c
@@ -103,6 +103,7 @@
struct work_struct svc_exit;
struct work_struct svc_rcv_msg;
struct work_struct ind_ack;
+ struct work_struct qmi_handle_free;
struct workqueue_struct *svc_event_wq;
struct qmi_handle *clnt_handle;
struct notifier_block notifier;
@@ -122,6 +123,18 @@
static void root_service_service_arrive(struct work_struct *work);
static void root_service_exit_work(struct work_struct *work);
+static void free_qmi_handle(struct work_struct *work)
+{
+ struct qmi_client_info *data = container_of(work,
+ struct qmi_client_info, qmi_handle_free);
+
+ mutex_lock(&qmi_client_release_lock);
+ data->service_connected = false;
+ qmi_handle_destroy(data->clnt_handle);
+ data->clnt_handle = NULL;
+ mutex_unlock(&qmi_client_release_lock);
+}
+
static struct service_notif_info *_find_service_info(const char *service_path)
{
struct service_notif_info *service_notif;
@@ -425,11 +438,7 @@
* Destroy client handle and try connecting when
* service comes up again.
*/
- mutex_lock(&qmi_client_release_lock);
- data->service_connected = false;
- qmi_handle_destroy(data->clnt_handle);
- data->clnt_handle = NULL;
- mutex_unlock(&qmi_client_release_lock);
+ queue_work(data->svc_event_wq, &data->qmi_handle_free);
}
static void root_service_exit_work(struct work_struct *work)
@@ -485,7 +494,7 @@
info->subsys_state = ROOT_PD_SHUTDOWN;
break;
}
- queue_work(info->svc_event_wq, &info->svc_exit);
+ root_service_service_exit(info, info->subsys_state);
break;
default:
break;
@@ -560,6 +569,7 @@
INIT_WORK(&qmi_data->svc_exit, root_service_exit_work);
INIT_WORK(&qmi_data->svc_rcv_msg, root_service_clnt_recv_msg);
INIT_WORK(&qmi_data->ind_ack, send_ind_ack);
+ INIT_WORK(&qmi_data->qmi_handle_free, free_qmi_handle);
*curr_state = service_notif->curr_state =
SERVREG_NOTIF_SERVICE_STATE_UNINIT_V01;
diff --git a/drivers/soc/qcom/spss_utils.c b/drivers/soc/qcom/spss_utils.c
new file mode 100644
index 0000000..c70ef3a
--- /dev/null
+++ b/drivers/soc/qcom/spss_utils.c
@@ -0,0 +1,439 @@
+/*
+ * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Secure-Processor-SubSystem (SPSS) utilities.
+ *
+ * This driver provides utilities for the Secure Processor (SP).
+ *
+ * The SP daemon needs to load different SPSS images based on:
+ *
+ * 1. Test/Production key used to sign the SPSS image (read fuses).
+ * 2. SPSS HW version (selected via Device Tree).
+ *
+ */
+
+#define pr_fmt(fmt) "spss_utils [%s]: " fmt, __func__
+
+#include <linux/kernel.h> /* min() */
+#include <linux/module.h> /* MODULE_LICENSE */
+#include <linux/device.h> /* class_create() */
+#include <linux/slab.h> /* kzalloc() */
+#include <linux/fs.h> /* file_operations */
+#include <linux/cdev.h> /* cdev_add() */
+#include <linux/errno.h> /* EINVAL, ETIMEDOUT */
+#include <linux/printk.h> /* pr_err() */
+#include <linux/bitops.h> /* BIT(x) */
+#include <linux/platform_device.h> /* platform_driver_register() */
+#include <linux/of.h> /* of_property_count_strings() */
+#include <linux/io.h> /* ioremap_nocache() */
+
+#include <soc/qcom/subsystem_restart.h>
+
+/* driver name */
+#define DEVICE_NAME "spss-utils"
+
+enum spss_firmware_type {
+ SPSS_FW_TYPE_DEV = 'd',
+ SPSS_FW_TYPE_TEST = 't',
+ SPSS_FW_TYPE_PROD = 'p',
+};
+
+static enum spss_firmware_type firmware_type = SPSS_FW_TYPE_TEST;
+static const char *dev_firmware_name;
+static const char *test_firmware_name;
+static const char *prod_firmware_name;
+static const char *firmware_name = "NA";
+static struct device *spss_dev;
+static u32 spss_debug_reg_addr; /* SP_SCSR_MBn_SP2CL_GPm(n,m) */
+
+/*==========================================================================*/
+/* Device Sysfs */
+/*==========================================================================*/
+
+static ssize_t firmware_name_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+
+ if (!dev || !attr || !buf) {
+ pr_err("invalid param.\n");
+ return -EINVAL;
+ }
+
+ if (firmware_name == NULL)
+ ret = snprintf(buf, PAGE_SIZE, "%s\n", "unknown");
+ else
+ ret = snprintf(buf, PAGE_SIZE, "%s\n", firmware_name);
+
+ return ret;
+}
+
+static ssize_t firmware_name_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ pr_err("set firmware name is not allowed.\n");
+
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(firmware_name, 0444,
+ firmware_name_show, firmware_name_store);
+
+static ssize_t test_fuse_state_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+
+ if (!dev || !attr || !buf) {
+ pr_err("invalid param.\n");
+ return -EINVAL;
+ }
+
+ switch (firmware_type) {
+ case SPSS_FW_TYPE_DEV:
+ ret = snprintf(buf, PAGE_SIZE, "%s", "dev");
+ break;
+ case SPSS_FW_TYPE_TEST:
+ ret = snprintf(buf, PAGE_SIZE, "%s", "test");
+ break;
+ case SPSS_FW_TYPE_PROD:
+ ret = snprintf(buf, PAGE_SIZE, "%s", "prod");
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static ssize_t test_fuse_state_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ pr_err("set test fuse state is not allowed.\n");
+
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(test_fuse_state, 0444,
+ test_fuse_state_show, test_fuse_state_store);
+
+static ssize_t spss_debug_reg_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ void __iomem *spss_debug_reg = NULL;
+ u32 val1, val2;
+
+ if (!dev || !attr || !buf) {
+ pr_err("invalid param.\n");
+ return -EINVAL;
+ }
+
+ pr_debug("spss_debug_reg_addr [0x%x].\n", spss_debug_reg_addr);
+
+ spss_debug_reg = ioremap_nocache(spss_debug_reg_addr, sizeof(u32)*2);
+
+ if (!spss_debug_reg) {
+ pr_err("can't map debug reg addr.\n");
+ return -EFAULT;
+ }
+
+ val1 = readl_relaxed(spss_debug_reg);
+ val2 = readl_relaxed(((char *) spss_debug_reg) + sizeof(u32));
+
+ ret = snprintf(buf, PAGE_SIZE, "val1 [0x%x] val2 [0x%x]", val1, val2);
+
+ iounmap(spss_debug_reg);
+
+ return ret;
+}
+
+static ssize_t spss_debug_reg_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ pr_err("set debug reg is not allowed.\n");
+
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(spss_debug_reg, 0444,
+ spss_debug_reg_show, spss_debug_reg_store);
+
+static int spss_create_sysfs(struct device *dev)
+{
+ int ret;
+
+ ret = device_create_file(dev, &dev_attr_firmware_name);
+ if (ret < 0) {
+ pr_err("failed to create sysfs file for firmware_name.\n");
+ return ret;
+ }
+
+ ret = device_create_file(dev, &dev_attr_test_fuse_state);
+ if (ret < 0) {
+ pr_err("failed to create sysfs file for test_fuse_state.\n");
+ device_remove_file(dev, &dev_attr_firmware_name);
+ return ret;
+ }
+
+ ret = device_create_file(dev, &dev_attr_spss_debug_reg);
+ if (ret < 0) {
+ pr_err("failed to create sysfs file for spss_debug_reg.\n");
+ device_remove_file(dev, &dev_attr_firmware_name);
+ device_remove_file(dev, &dev_attr_test_fuse_state);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*==========================================================================*/
+/* Device Tree */
+/*==========================================================================*/
+
+/**
+ * spss_parse_dt() - Parse Device Tree info.
+ */
+static int spss_parse_dt(struct device_node *node)
+{
+ int ret;
+ u32 spss_fuse1_addr = 0;
+ u32 spss_fuse1_bit = 0;
+ u32 spss_fuse1_mask = 0;
+ void __iomem *spss_fuse1_reg = NULL;
+ u32 spss_fuse2_addr = 0;
+ u32 spss_fuse2_bit = 0;
+ u32 spss_fuse2_mask = 0;
+ void __iomem *spss_fuse2_reg = NULL;
+ u32 val1 = 0;
+ u32 val2 = 0;
+
+ ret = of_property_read_string(node, "qcom,spss-dev-firmware-name",
+ &dev_firmware_name);
+ if (ret < 0) {
+ pr_err("can't get dev fw name.\n");
+ return -EFAULT;
+ }
+
+ ret = of_property_read_string(node, "qcom,spss-test-firmware-name",
+ &test_firmware_name);
+ if (ret < 0) {
+ pr_err("can't get test fw name.\n");
+ return -EFAULT;
+ }
+
+ ret = of_property_read_string(node, "qcom,spss-prod-firmware-name",
+ &prod_firmware_name);
+ if (ret < 0) {
+ pr_err("can't get prod fw name.\n");
+ return -EFAULT;
+ }
+
+ ret = of_property_read_u32(node, "qcom,spss-fuse1-addr",
+ &spss_fuse1_addr);
+ if (ret < 0) {
+ pr_err("can't get fuse1 addr.\n");
+ return -EFAULT;
+ }
+
+ ret = of_property_read_u32(node, "qcom,spss-fuse2-addr",
+ &spss_fuse2_addr);
+ if (ret < 0) {
+ pr_err("can't get fuse2 addr.\n");
+ return -EFAULT;
+ }
+
+ ret = of_property_read_u32(node, "qcom,spss-fuse1-bit",
+ &spss_fuse1_bit);
+ if (ret < 0) {
+ pr_err("can't get fuse1 bit.\n");
+ return -EFAULT;
+ }
+
+ ret = of_property_read_u32(node, "qcom,spss-fuse2-bit",
+ &spss_fuse2_bit);
+ if (ret < 0) {
+ pr_err("can't get fuse2 bit.\n");
+ return -EFAULT;
+ }
+
+
+ spss_fuse1_mask = BIT(spss_fuse1_bit);
+ spss_fuse2_mask = BIT(spss_fuse2_bit);
+
+ pr_debug("spss fuse1 addr [0x%x] bit [%d] .\n",
+ (int) spss_fuse1_addr, (int) spss_fuse1_bit);
+ pr_debug("spss fuse2 addr [0x%x] bit [%d] .\n",
+ (int) spss_fuse2_addr, (int) spss_fuse2_bit);
+
+ spss_fuse1_reg = ioremap_nocache(spss_fuse1_addr, sizeof(u32));
+
+ if (!spss_fuse1_reg) {
+ pr_err("can't map fuse1 addr.\n");
+ return -EFAULT;
+ }
+
+ spss_fuse2_reg = ioremap_nocache(spss_fuse2_addr, sizeof(u32));
+
+ if (!spss_fuse2_reg) {
+ iounmap(spss_fuse1_reg);
+ pr_err("can't map fuse2 addr.\n");
+ return -EFAULT;
+ }
+
+ val1 = readl_relaxed(spss_fuse1_reg);
+ val2 = readl_relaxed(spss_fuse2_reg);
+
+ pr_debug("spss fuse1 value [0x%08x].\n", (int) val1);
+ pr_debug("spss fuse2 value [0x%08x].\n", (int) val2);
+
+ pr_debug("spss fuse1 mask [0x%08x].\n", (int) spss_fuse1_mask);
+ pr_debug("spss fuse2 mask [0x%08x].\n", (int) spss_fuse2_mask);
+
+ /**
+ * Set firmware_type based on fuses:
+ * SPSS_CONFIG_MODE 11: dev
+ * SPSS_CONFIG_MODE 01 or 10: test
+ * SPSS_CONFIG_MODE 00: prod
+ */
+ if ((val1 & spss_fuse1_mask) && (val2 & spss_fuse2_mask))
+ firmware_type = SPSS_FW_TYPE_DEV;
+ else if ((val1 & spss_fuse1_mask) || (val2 & spss_fuse2_mask))
+ firmware_type = SPSS_FW_TYPE_TEST;
+ else
+ firmware_type = SPSS_FW_TYPE_PROD;
+
+ iounmap(spss_fuse1_reg);
+ iounmap(spss_fuse2_reg);
+
+ ret = of_property_read_u32(node, "qcom,spss-debug-reg-addr",
+ &spss_debug_reg_addr);
+ if (ret < 0) {
+ pr_err("can't get debug regs addr.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * spss_probe() - initialization sequence
+ */
+static int spss_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct device_node *np = NULL;
+ struct device *dev = NULL;
+
+ if (!pdev) {
+ pr_err("invalid pdev.\n");
+ return -ENODEV;
+ }
+
+ np = pdev->dev.of_node;
+ if (!np) {
+ pr_err("invalid DT node.\n");
+ return -EINVAL;
+ }
+
+ dev = &pdev->dev;
+ spss_dev = dev;
+
+ if (dev == NULL) {
+ pr_err("invalid dev.\n");
+ return -EINVAL;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ ret = spss_parse_dt(np);
+ if (ret < 0) {
+ pr_err("fail to parse device tree.\n");
+ return -EFAULT;
+ }
+
+ switch (firmware_type) {
+ case SPSS_FW_TYPE_DEV:
+ firmware_name = dev_firmware_name;
+ break;
+ case SPSS_FW_TYPE_TEST:
+ firmware_name = test_firmware_name;
+ break;
+ case SPSS_FW_TYPE_PROD:
+ firmware_name = prod_firmware_name;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = subsystem_set_fwname("spss", firmware_name);
+ if (ret < 0) {
+ pr_err("fail to set fw name.\n");
+ return -EFAULT;
+ }
+
+ ret = spss_create_sysfs(dev);
+ if (ret < 0) {
+ pr_err("fail to create sysfs.\n");
+ return -EFAULT;
+ }
+
+ pr_info("Initialization completed ok, firmware_name [%s].\n",
+ firmware_name);
+
+ return 0;
+}
+
+static const struct of_device_id spss_match_table[] = {
+ { .compatible = "qcom,spss-utils", },
+ { },
+};
+
+static struct platform_driver spss_driver = {
+ .probe = spss_probe,
+ .driver = {
+ .name = DEVICE_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(spss_match_table),
+ },
+};
+
+/*==========================================================================*/
+/* Driver Init/Exit */
+/*==========================================================================*/
+static int __init spss_init(void)
+{
+ int ret = 0;
+
+ pr_info("spss-utils driver Ver 2.0 30-Mar-2017.\n");
+
+ ret = platform_driver_register(&spss_driver);
+ if (ret)
+ pr_err("register platform driver failed, ret [%d]\n", ret);
+
+ return ret;
+}
+late_initcall(spss_init); /* start after PIL driver */
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Secure Processor Utilities");
diff --git a/drivers/tty/serial/msm_geni_serial.c b/drivers/tty/serial/msm_geni_serial.c
index 9c3b6ff..b3cb5c0 100644
--- a/drivers/tty/serial/msm_geni_serial.c
+++ b/drivers/tty/serial/msm_geni_serial.c
@@ -205,15 +205,17 @@
}
static int msm_geni_serial_poll_bit(struct uart_port *uport,
- int offset, int bit_field)
+ int offset, int bit_field, bool set)
{
int iter = 0;
unsigned int reg;
bool met = false;
+ bool cond = false;
while (iter < 1000) {
reg = geni_read_reg_nolog(uport->membase, offset);
- if (reg & bit_field) {
+ cond = reg & bit_field;
+ if (cond == set) {
met = true;
break;
}
@@ -226,8 +228,11 @@
static void msm_geni_serial_setup_tx(struct uart_port *uport,
unsigned int xmit_size)
{
+ u32 m_cmd = 0;
+
geni_write_reg_nolog(xmit_size, uport->membase, SE_UART_TX_TRANS_LEN);
- geni_setup_m_cmd(uport->membase, UART_START_TX, 0);
+ m_cmd |= (UART_START_TX << M_OPCODE_SHFT);
+ geni_write_reg_nolog(m_cmd, uport->membase, SE_GENI_M_CMD0);
/*
* Writes to enable the primary sequencer should go through before
* exiting this function.
@@ -241,41 +246,36 @@
unsigned int irq_clear = M_CMD_DONE_EN;
done = msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
- M_CMD_DONE_EN);
+ M_CMD_DONE_EN, true);
if (!done) {
- geni_cancel_m_cmd(uport->membase);
+ geni_write_reg_nolog(M_GENI_CMD_CANCEL, uport->membase,
+ SE_GENI_S_CMD_CTRL_REG);
irq_clear |= M_CMD_CANCEL_EN;
if (!msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
- M_CMD_CANCEL_EN)) {
- geni_abort_m_cmd(uport->membase);
+ M_CMD_CANCEL_EN, true)) {
+ geni_write_reg_nolog(M_GENI_CMD_ABORT, uport->membase,
+ SE_GENI_M_CMD_CTRL_REG);
irq_clear |= M_CMD_ABORT_EN;
msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
- M_CMD_ABORT_EN);
+ M_CMD_ABORT_EN, true);
}
}
geni_write_reg_nolog(irq_clear, uport->membase, SE_GENI_M_IRQ_CLEAR);
}
-static void msm_geni_serial_poll_cancel_rx(struct uart_port *uport)
+static void msm_geni_serial_abort_rx(struct uart_port *uport)
{
- int done = 0;
unsigned int irq_clear = S_CMD_DONE_EN;
- done = msm_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS,
- S_CMD_DONE_EN);
- if (!done) {
- geni_cancel_s_cmd(uport->membase);
- irq_clear |= S_CMD_CANCEL_EN;
- if (!msm_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS,
- S_CMD_CANCEL_EN)) {
- geni_abort_s_cmd(uport->membase);
- irq_clear |= S_CMD_ABORT_EN;
- msm_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS,
- S_CMD_ABORT_EN);
- }
- }
+ geni_abort_s_cmd(uport->membase);
+ /* Ensure this goes through before polling. */
+ mb();
+ irq_clear |= S_CMD_ABORT_EN;
+ msm_geni_serial_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG,
+ S_GENI_CMD_ABORT, false);
geni_write_reg_nolog(irq_clear, uport->membase, SE_GENI_S_IRQ_CLEAR);
}
+
#ifdef CONFIG_CONSOLE_POLL
static int msm_geni_serial_get_char(struct uart_port *uport)
{
@@ -284,7 +284,7 @@
unsigned int s_irq_status;
if (!(msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
- M_SEC_IRQ_EN))) {
+ M_SEC_IRQ_EN, true))) {
dev_err(uport->dev, "%s: Failed waiting for SE\n", __func__);
return -ENXIO;
}
@@ -297,7 +297,7 @@
geni_write_reg_nolog(s_irq_status, uport->membase, SE_GENI_S_IRQ_CLEAR);
if (!(msm_geni_serial_poll_bit(uport, SE_GENI_RX_FIFO_STATUS,
- RX_FIFO_WC_MSK))) {
+ RX_FIFO_WC_MSK, true))) {
dev_err(uport->dev, "%s: Failed waiting for Rx\n", __func__);
return -ENXIO;
}
@@ -323,7 +323,7 @@
SE_GENI_TX_WATERMARK_REG);
msm_geni_serial_setup_tx(uport, 1);
if (!msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
- M_TX_FIFO_WATERMARK_EN))
+ M_TX_FIFO_WATERMARK_EN, true))
WARN_ON(1);
geni_write_reg_nolog(b, uport->membase, SE_GENI_TX_FIFOn);
geni_write_reg_nolog(M_TX_FIFO_WATERMARK_EN, uport->membase,
@@ -378,7 +378,7 @@
* lost.
*/
while (!msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
- M_TX_FIFO_WATERMARK_EN))
+ M_TX_FIFO_WATERMARK_EN, true))
break;
chars_to_write = min((unsigned int)(count - i),
avail_fifo_bytes);
@@ -496,10 +496,10 @@
geni_cancel_m_cmd(uport->membase);
if (!msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
- M_CMD_CANCEL_EN)) {
+ M_CMD_CANCEL_EN, true)) {
geni_abort_m_cmd(uport->membase);
msm_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
- M_CMD_ABORT_EN);
+ M_CMD_ABORT_EN, true);
geni_write_reg_nolog(M_CMD_ABORT_EN, uport->membase,
SE_GENI_M_IRQ_CLEAR);
}
@@ -510,11 +510,8 @@
{
unsigned int geni_s_irq_en;
unsigned int geni_m_irq_en;
- unsigned int geni_status;
- geni_status = geni_read_reg_nolog(uport->membase, SE_GENI_STATUS);
- if (geni_status & S_GENI_CMD_ACTIVE)
- msm_geni_serial_poll_cancel_rx(uport);
+ msm_geni_serial_abort_rx(uport);
geni_s_irq_en = geni_read_reg_nolog(uport->membase,
SE_GENI_S_IRQ_EN);
geni_m_irq_en = geni_read_reg_nolog(uport->membase,
@@ -552,11 +549,7 @@
/* Possible stop rx is called multiple times. */
if (!(geni_status & S_GENI_CMD_ACTIVE))
return;
- geni_write_reg_nolog(S_GENI_CMD_CANCEL, uport->membase,
- SE_GENI_S_CMD_CTRL_REG);
- if (!msm_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS,
- S_CMD_CANCEL_EN))
- WARN_ON(1);
+ msm_geni_serial_abort_rx(uport);
}
static int handle_rx_hs(struct uart_port *uport,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c3d249f..edb7a9a 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2661,8 +2661,15 @@
if (ret < 0)
return ret;
- /* The port state is unknown until the reset completes. */
- if (!(portstatus & USB_PORT_STAT_RESET))
+ /*
+ * The port state is unknown until the reset completes.
+ *
+ * On top of that, some chips may require additional time
+ * to re-establish a connection after the reset is complete,
+ * so also wait for the connection to be re-established.
+ */
+ if (!(portstatus & USB_PORT_STAT_RESET) &&
+ (portstatus & USB_PORT_STAT_CONNECTION))
break;
/* switch to the long delay after two short delay failures */
diff --git a/drivers/usb/dwc3/dwc3-msm.c b/drivers/usb/dwc3/dwc3-msm.c
index a88b26b..a159011 100644
--- a/drivers/usb/dwc3/dwc3-msm.c
+++ b/drivers/usb/dwc3/dwc3-msm.c
@@ -808,7 +808,8 @@
/* Provide physical USB addresses for DEPCMD and GEVENTCNT registers */
ch_info->depcmd_low_addr = (u32)(dwc->reg_phys +
- DWC3_DEPCMD);
+ DWC3_DEP_BASE(dep->number) + DWC3_DEPCMD);
+
ch_info->depcmd_hi_addr = 0;
ch_info->xfer_ring_base_addr = dwc3_trb_dma_offset(dep,
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index b4d4499..0dfe271 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -319,9 +319,6 @@
if (unmap_after_complete)
usb_gadget_unmap_request(&dwc->gadget,
&req->request, req->direction);
-
- if (dep->number > 1)
- pm_runtime_put(dwc->dev);
}
int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
@@ -1241,7 +1238,6 @@
return ret;
}
- pm_runtime_get(dwc->dev);
req->request.actual = 0;
req->request.status = -EINPROGRESS;
req->direction = dep->direction;
diff --git a/fs/orangefs/devorangefs-req.c b/fs/orangefs/devorangefs-req.c
index 516ffb4..f419dd9 100644
--- a/fs/orangefs/devorangefs-req.c
+++ b/fs/orangefs/devorangefs-req.c
@@ -402,8 +402,9 @@
/* remove the op from the in progress hash table */
op = orangefs_devreq_remove_op(head.tag);
if (!op) {
- gossip_err("WARNING: No one's waiting for tag %llu\n",
- llu(head.tag));
+ gossip_debug(GOSSIP_DEV_DEBUG,
+ "%s: No one's waiting for tag %llu\n",
+ __func__, llu(head.tag));
return ret;
}
diff --git a/fs/orangefs/orangefs-debugfs.c b/fs/orangefs/orangefs-debugfs.c
index 38887cc..0748a26 100644
--- a/fs/orangefs/orangefs-debugfs.c
+++ b/fs/orangefs/orangefs-debugfs.c
@@ -671,8 +671,10 @@
*/
cdm_element_count =
orangefs_prepare_cdm_array(client_debug_array_string);
- if (cdm_element_count <= 0)
+ if (cdm_element_count <= 0) {
+ kfree(new);
goto out;
+ }
for (i = 0; i < cdm_element_count; i++) {
strlcat(new, "\t", string_size);
@@ -963,13 +965,13 @@
int ret;
ret = copy_from_user(&client_debug_array_string,
- (void __user *)arg,
- ORANGEFS_MAX_DEBUG_STRING_LEN);
+ (void __user *)arg,
+ ORANGEFS_MAX_DEBUG_STRING_LEN);
if (ret != 0) {
pr_info("%s: CLIENT_STRING: copy_from_user failed\n",
__func__);
- return -EIO;
+ return -EFAULT;
}
/*
@@ -984,17 +986,18 @@
*/
client_debug_array_string[ORANGEFS_MAX_DEBUG_STRING_LEN - 1] =
'\0';
-
+
pr_info("%s: client debug array string has been received.\n",
__func__);
if (!help_string_initialized) {
/* Build a proper debug help string. */
- if (orangefs_prepare_debugfs_help_string(0)) {
+ ret = orangefs_prepare_debugfs_help_string(0);
+ if (ret) {
gossip_err("%s: no debug help string \n",
__func__);
- return -EIO;
+ return ret;
}
}
@@ -1007,7 +1010,7 @@
help_string_initialized++;
- return ret;
+ return 0;
}
int orangefs_debugfs_new_debug(void __user *arg)
diff --git a/fs/orangefs/orangefs-dev-proto.h b/fs/orangefs/orangefs-dev-proto.h
index a3d84ff..f380f9ed 100644
--- a/fs/orangefs/orangefs-dev-proto.h
+++ b/fs/orangefs/orangefs-dev-proto.h
@@ -50,8 +50,7 @@
* Misc constants. Please retain them as multiples of 8!
* Otherwise 32-64 bit interactions will be messed up :)
*/
-#define ORANGEFS_MAX_DEBUG_STRING_LEN 0x00000400
-#define ORANGEFS_MAX_DEBUG_ARRAY_LEN 0x00000800
+#define ORANGEFS_MAX_DEBUG_STRING_LEN 0x00000800
/*
* The maximum number of directory entries in a single request is 96.
diff --git a/include/linux/seemp_instrumentation.h b/include/linux/seemp_instrumentation.h
index 2c050cb..21bc436 100644
--- a/include/linux/seemp_instrumentation.h
+++ b/include/linux/seemp_instrumentation.h
@@ -66,91 +66,11 @@
seemp_logk_kernel_end(blck);
}
-
-/*
- * NOTE: only recvfrom is going to be instrumented
- * since recv sys call internally calls recvfrom
- * with 2 extra parameters
- */
-static inline void seemp_logk_recvfrom(int fd, void __user *ubuf,
- size_t size, unsigned int flags, struct sockaddr __user *addr,
- int __user *addr_len)
-{
- char *buf = NULL;
- void *blck = NULL;
-
- /*sets up buf and blck correctly*/
- blck = seemp_setup_buf(&buf);
- if (!blck)
- return;
-
- /*fill the buf*/
- SEEMP_LOGK_RECORD(SEEMP_API_kernel__recvfrom, "size=%u,fd=%d",
- (unsigned int)size, fd);
-
- seemp_logk_kernel_end(blck);
-}
-
-static inline void seemp_logk_oom_adjust_write(pid_t pid,
- kuid_t uid, int oom_adj)
-{
- char *buf = NULL;
- void *blck = NULL;
-
- /*sets up buf and blck correctly*/
- blck = seemp_setup_buf(&buf);
- if (!blck)
- return;
-
- /*fill the buf*/
- SEEMP_LOGK_RECORD(SEEMP_API_kernel__oom_adjust_write,
- "app_uid=%d,app_pid=%d,oom_adj=%d",
- uid.val, pid, oom_adj);
-
- seemp_logk_kernel_end(blck);
-}
-
-static inline void seemp_logk_oom_score_adj_write(pid_t pid, kuid_t uid,
- int oom_adj_score)
-{
- char *buf = NULL;
- void *blck = NULL;
-
- /*sets up buf and blck correctly*/
- blck = seemp_setup_buf(&buf);
- if (!blck)
- return;
-
- /*fill the buf*/
- snprintf(buf, MAX_BUF_SIZE,
- "-1|kernel|oom_score_adj_write|app_uid=%d,app_pid=%d,oom_adj=%d|--end",
- uid.val, pid, oom_adj_score);
-
- seemp_logk_kernel_end(blck);
-}
-
#else
static inline void seemp_logk_sendto(int fd, void __user *buff,
size_t len, unsigned int flags, struct sockaddr __user *addr,
int addr_len)
{
}
-
-static inline void seemp_logk_recvfrom
- (int fd, void __user *ubuf, size_t size,
- unsigned int flags, struct sockaddr __user *addr,
- int __user *addr_len)
-{
-}
-
-static inline void seemp_logk_oom_adjust_write
- (pid_t pid, kuid_t uid, int oom_adj)
-{
-}
-
-static inline void seemp_logk_oom_score_adj_write
- (pid_t pid, kuid_t uid, int oom_adj_score)
-{
-}
#endif
#endif
diff --git a/include/uapi/linux/seemp_param_id.h b/include/uapi/linux/seemp_param_id.h
index 8f1f05f..c72c579 100644
--- a/include/uapi/linux/seemp_param_id.h
+++ b/include/uapi/linux/seemp_param_id.h
@@ -1,6 +1,9 @@
#ifndef _PARAM_ID_H_
#define _PARAM_ID_H_
+#include <linux/string.h>
+#include <linux/types.h>
+
#define PARAM_ID_LEN 0
#define PARAM_ID_OOM_ADJ 1
#define PARAM_ID_APP_UID 2
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 86cb858..4f1f9e9 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -1890,7 +1890,7 @@
#define V4L2_DEC_CMD_RESUME (3)
#define V4L2_QCOM_CMD_FLUSH (4)
#define V4L2_DEC_QCOM_CMD_RECONFIG_HINT (5)
-
+#define V4L2_QCOM_CMD_SESSION_CONTINUE (6)
/* Flags for V4L2_DEC_CMD_START */
#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 873df83..e6acef5 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -798,6 +798,7 @@
struct rtable *rt;
struct flowi4 fl4;
const struct iphdr *iph = (const struct iphdr *) skb->data;
+ struct net *net = dev_net(skb->dev);
int oif = skb->dev->ifindex;
u8 tos = RT_TOS(iph->tos);
u8 prot = iph->protocol;
@@ -805,7 +806,7 @@
rt = (struct rtable *) dst;
- __build_flow_key(sock_net(sk), &fl4, sk, iph, oif, tos, prot, mark, 0);
+ __build_flow_key(net, &fl4, sk, iph, oif, tos, prot, mark, 0);
__ip_do_redirect(rt, skb, &fl4, true);
}
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index f2b04a7..8ab0974 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -4235,8 +4235,8 @@
if (unlikely(!PAGE_ALIGNED(req->tp_block_size)))
goto out;
if (po->tp_version >= TPACKET_V3 &&
- (int)(req->tp_block_size -
- BLK_PLUS_PRIV(req_u->req3.tp_sizeof_priv)) <= 0)
+ req->tp_block_size <=
+ BLK_PLUS_PRIV((u64)req_u->req3.tp_sizeof_priv))
goto out;
if (unlikely(req->tp_frame_size < po->tp_hdrlen +
po->tp_reserve))
diff --git a/net/socket.c b/net/socket.c
index c518841..a4fb472 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -535,7 +535,7 @@
return used;
}
-int sockfs_setattr(struct dentry *dentry, struct iattr *iattr)
+static int sockfs_setattr(struct dentry *dentry, struct iattr *iattr)
{
int err = simple_setattr(dentry, iattr);
diff --git a/net/wireless/db.txt b/net/wireless/db.txt
index a2fc3a0..449e4a3 100644
--- a/net/wireless/db.txt
+++ b/net/wireless/db.txt
@@ -1,17 +1,1491 @@
-#
-# This file is a placeholder to prevent accidental build breakage if someone
-# enables CONFIG_CFG80211_INTERNAL_REGDB. Almost no one actually needs to
-# enable that build option.
-#
-# You should be using CRDA instead. It is even better if you use the CRDA
-# package provided by your distribution, since they will probably keep it
-# up-to-date on your behalf.
-#
-# If you _really_ intend to use CONFIG_CFG80211_INTERNAL_REGDB then you will
-# need to replace this file with one containing appropriately formatted
-# regulatory rules that cover the regulatory domains you will be using. Your
-# best option is to extract the db.txt file from the wireless-regdb git
-# repository:
-#
-# git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-regdb.git
-#
+# This is the world regulatory domain
+country 00:
+ (2402 - 2472 @ 40), (20)
+ # Channel 12 - 13.
+ (2457 - 2482 @ 40), (20), PASSIVE-SCAN, NO-IBSS
+ # Channel 14. Only JP enables this and for 802.11b only
+ (2474 - 2494 @ 20), (20), PASSIVE-SCAN, NO-IBSS, NO-OFDM
+ # Channel 36 - 48
+ (5170 - 5250 @ 80), (20), PASSIVE-SCAN, NO-IBSS
+ (5250 - 5330 @ 80), (20), PASSIVE-SCAN, NO-IBSS
+ (5490 - 5710 @ 80), (20), PASSIVE-SCAN, NO-IBSS
+ # NB: 5260 MHz - 5700 MHz requies DFS
+ # Channel 149 - 165
+ (5735 - 5835 @ 80), (20), PASSIVE-SCAN, NO-IBSS
+ # IEEE 802.11ad (60GHz), channels 1..3
+ (57240 - 63720 @ 2160), (0)
+
+
+country AE: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country AF: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country AI: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country AL: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5150 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5350 @ 80), (23), DFS, AUTO-BW
+ (5470 - 5710 @ 160), (30), DFS
+
+country AM: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 20), (18)
+ (5250 - 5330 @ 20), (18), DFS
+
+country AN: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country AR:
+ (2402 - 2482 @ 40), (36)
+ (5170 - 5330 @ 160), (23)
+ (5490 - 5590 @ 80), (36)
+ (5650 - 5730 @ 80), (36)
+ (5735 - 5835 @ 80), (36)
+
+country AS: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5850 @ 80), (30)
+
+country AT: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country AU: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5590 @ 80), (24), DFS
+ (5650 - 5730 @ 80), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country AW: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country AZ: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (18), AUTO-BW
+ (5250 - 5330 @ 80), (18), DFS, AUTO-BW
+
+country BA: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country BB: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5735 - 5835 @ 80), (30)
+
+country BD:
+ (2402 - 2482 @ 40), (20)
+ (5735 - 5835 @ 80), (30)
+
+country BE: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country BF: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country BG: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country BH:
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5330 @ 20), (23)
+ (5735 - 5835 @ 20), (33)
+
+country BL: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country BM: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country BN: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (20), AUTO-BW
+ (5250 - 5330 @ 80), (20), DFS, AUTO-BW
+ (5735 - 5835 @ 80), (20)
+
+country BO: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5250 - 5330 @ 80), (30), DFS
+ (5735 - 5835 @ 80), (30)
+
+country BR: DFS-FCC
+ (2402 - 2482 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country BS: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country BT: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country BY: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country BZ:
+ (2402 - 2482 @ 40), (36)
+ (5170 - 5330 @ 160), (27)
+ (5490 - 5730 @ 160), (36)
+ (5735 - 5835 @ 80), (36)
+
+country CA: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5590 @ 80), (24), DFS
+ (5650 - 5730 @ 80), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country CF: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 40), (24)
+ (5250 - 5330 @ 40), (24), DFS
+ (5490 - 5730 @ 40), (24), DFS
+ (5735 - 5835 @ 40), (30)
+
+country CH: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+
+country CI: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country CL:
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5330 @ 160), (20)
+ (5735 - 5835 @ 80), (20)
+
+country CN: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5735 - 5835 @ 80), (33)
+ # 60 gHz band channels 1,4: 28dBm, channels 2,3: 44dBm
+ # ref: http://www.miit.gov.cn/n11293472/n11505629/n11506593/n11960250/n11960606/n11960700/n12330791.files/n12330790.pdf
+ (57240 - 59400 @ 2160), (28)
+ (59400 - 63720 @ 2160), (44)
+ (63720 - 65880 @ 2160), (28)
+
+country CO: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country CR: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 20), (24)
+ (5250 - 5330 @ 20), (24), DFS
+ (5490 - 5730 @ 20), (24), DFS
+ (5735 - 5835 @ 20), (30)
+
+country CX: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country CY: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+# Data from http://www.ctu.eu/164/download/VOR/VOR-12-08-2005-34.pdf
+# and http://www.ctu.eu/164/download/VOR/VOR-12-05-2007-6-AN.pdf
+country CZ: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+# Data from "Frequenznutzungsplan" (as published in April 2008), downloaded from
+# http://www.bundesnetzagentur.de/cae/servlet/contentblob/38448/publicationFile/2659/Frequenznutzungsplan2008_Id17448pdf.pdf
+# For the 5GHz range also see
+# http://www.bundesnetzagentur.de/cae/servlet/contentblob/38216/publicationFile/6579/WLAN5GHzVfg7_2010_28042010pdf.pdf
+
+country DE: DFS-ETSI
+ # entries 279004 and 280006
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country DK: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country DM: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5735 - 5835 @ 80), (30)
+
+country DO: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5735 - 5835 @ 80), (30)
+
+country DZ: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5670 @ 160), (23), DFS
+
+country EC: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 20), (24)
+ (5250 - 5330 @ 20), (24), DFS
+ (5490 - 5730 @ 20), (24), DFS
+ (5735 - 5835 @ 20), (30)
+
+country EE: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country EG: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 40), (23)
+ (5250 - 5330 @ 40), (23), DFS
+
+country ES: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country ET: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country FI: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country FM: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country FR: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country GB: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country GD: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country GE: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (18), AUTO-BW
+ (5250 - 5330 @ 80), (18), DFS, AUTO-BW
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country GF: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country GH: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country GL: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country GP: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country GR: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country GT: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country GU: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country GY:
+ (2402 - 2482 @ 40), (30)
+ (5735 - 5835 @ 80), (30)
+
+country HK: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country HN:
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5330 @ 160), (24)
+ (5490 - 5730 @ 160), (24)
+ (5735 - 5835 @ 80), (30)
+
+country HR: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country HT: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country HU: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country ID:
+ # ref: http://www.postel.go.id/content/ID/regulasi/standardisasi/kepdir/bwa%205,8%20ghz.pdf
+ (2402 - 2482 @ 40), (30)
+ (5735 - 5815 @ 20), (30)
+
+country IE: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country IL: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+
+country IN:
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5330 @ 160), (23)
+ (5735 - 5835 @ 80), (30)
+
+country IR:
+ (2402 - 2482 @ 40), (20)
+ (5735 - 5835 @ 80), (30)
+
+country IS: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country IT: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country JM: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country JO:
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23)
+ (5735 - 5835 @ 80), (23)
+
+country JP: DFS-JP
+ (2402 - 2482 @ 40), (20)
+ (2474 - 2494 @ 20), (20), NO-OFDM
+ (5170 - 5250 @ 80), (20), AUTO-BW, NO-OUTDOOR
+ (5250 - 5330 @ 80), (20), DFS, AUTO-BW, NO-OUTDOOR
+ (5490 - 5710 @ 160), (20), DFS
+ # 60 GHz band channels 2-4 at 10mW,
+ # ref: http://www.arib.or.jp/english/html/overview/doc/1-STD-T74v1_1.pdf
+ (59000 - 66000 @ 2160), (10 mW)
+
+country KE: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23)
+ (5490 - 5570 @ 80), (30), DFS
+ (5735 - 5775 @ 40), (23)
+
+country KH: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country KN: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ (5735 - 5815 @ 80), (30)
+
+country KR: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (20), AUTO-BW
+ (5250 - 5330 @ 80), (20), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ (5735 - 5835 @ 80), (30)
+ # 60 GHz band channels 1-4,
+ # ref: http://www.law.go.kr/%ED%96%89%EC%A0%95%EA%B7%9C%EC%B9%99/%EB%AC%B4%EC%84%A0%EC%84%A4%EB%B9%84%EA%B7%9C%EC%B9%99
+ (57000 - 66000 @ 2160), (43)
+
+country KP: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (20)
+ (5250 - 5330 @ 80), (20), DFS
+ (5490 - 5630 @ 80), (30), DFS
+ (5735 - 5815 @ 80), (30)
+
+country KW: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+
+country KY: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country KZ:
+ (2402 - 2482 @ 40), (20)
+
+country LB: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country LC: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (20), AUTO-BW
+ (5250 - 5330 @ 80), (30), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ (5735 - 5815 @ 80), (30)
+
+country LI: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+
+country LK: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 20), (24)
+ (5250 - 5330 @ 20), (24), DFS
+ (5490 - 5730 @ 20), (24), DFS
+ (5735 - 5835 @ 20), (30)
+
+country LS: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country LT: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country LU: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country LV: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country MA: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+
+country MC: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country MD: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country ME: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country MF: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country MH: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country MK: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country MN: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country MO: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country MP: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country MQ: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country MR: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country MT: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country MU: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country MV: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (20), AUTO-BW
+ (5250 - 5330 @ 80), (20), DFS, AUTO-BW
+ (5735 - 5835 @ 80), (20)
+
+country MW: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country MX: DFS-FCC
+ (2402 - 2482 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country MY: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5650 @ 160), (24), DFS
+ (5735 - 5815 @ 80), (24)
+
+country NA: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ (5735 - 5835 @ 80), (33)
+
+country NG: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5250 - 5330 @ 80), (30), DFS
+ (5735 - 5835 @ 80), (30)
+
+country NI: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country NL: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country NO: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country NP:
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5330 @ 160), (20)
+ (5735 - 5835 @ 80), (20)
+
+country NZ: DFS-FCC
+ (2402 - 2482 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country OM: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country PA:
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (23), AUT0-BW
+ (5250 - 5330 @ 80), (30), AUTO-BW
+ (5735 - 5835 @ 80), (36)
+
+country PE: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country PF: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country PG: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country PH: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country PK:
+ (2402 - 2482 @ 40), (30)
+ (5735 - 5835 @ 80), (30)
+
+country PL: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country PM: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country PR: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+# Public Safety FCCA, FCC4
+# 27dBm [4.9GHz 1/4 rate], 30dBm [1/2 rate], 33dBm [full rate], and 5GHz same as FCC1
+# db.txt cannot express the limitation on 5G so disable all 5G channels for FCC4
+country PS: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (4940 - 4990 @ 40), (33)
+
+country PT: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country PW: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country PY: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country QA:
+ (2402 - 2482 @ 40), (20)
+ (5735 - 5835 @ 80), (30)
+
+country RE: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country RO: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+# Source:
+# http://www.ratel.rs/upload/documents/Plan_namene/Plan_namene-sl_glasnik.pdf
+country RS: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country RU:
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5330 @ 160), (23)
+ (5490 - 5730 @ 160), (30)
+ (5735 - 5835 @ 80), (30)
+
+country RW: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country SA: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country SE: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country SG: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country SI: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country SK: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 5.9ghz band
+ # reference: http://www.etsi.org/deliver/etsi_en/302500_302599/302571/01.02.00_20/en_302571v010200a.pdf
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country SN:
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5330 @ 160), (24)
+ (5490 - 5730 @ 160), (24)
+ (5735 - 5835 @ 80), (30)
+
+country SR: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country SV: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 20), (23)
+ (5250 - 5330 @ 20), (23), DFS
+ (5735 - 5835 @ 20), (30)
+
+country SY:
+ (2402 - 2482 @ 40), (20)
+
+country TC: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country TD: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country TG: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 40), (23)
+ (5250 - 5330 @ 40), (23), DFS
+ (5490 - 5710 @ 40), (30), DFS
+
+country TH: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country TN: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+
+country TR: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country TT:
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5330 @ 160), (27)
+ (5490 - 5730 @ 160), (36)
+ (5735 - 5835 @ 80), (36)
+
+country TW: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country TZ:
+ (2402 - 2482 @ 40), (20)
+ (5735 - 5835 @ 80), (30)
+
+# Source:
+# #914 / 06 Sep 2007: http://www.ucrf.gov.ua/uk/doc/nkrz/1196068874
+# #1174 / 23 Oct 2008: http://www.nkrz.gov.ua/uk/activities/ruling/1225269361
+# (appendix 8)
+# Listed 5GHz range is a lowest common denominator for all related
+# rules in the referenced laws. Such a range is used because of
+# disputable definitions there.
+country UA: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (20), AUTO-BW
+ (5250 - 5330 @ 80), (20), DFS, AUTO-BW
+ (5490 - 5670 @ 160), (20), DFS
+ (5735 - 5835 @ 80), (20)
+ # 60 gHz band channels 1-4, ref: Etsi En 302 567
+ (57240 - 65880 @ 2160), (40), NO-OUTDOOR
+
+country UG: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country US: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+ # 5.9ghz band
+ # reference: https://apps.fcc.gov/edocs_public/attachmatch/FCC-03-324A1.pdf
+ (5842 - 5863 @ 5), (30)
+ (5850 - 5870 @ 10), (30)
+ (5860 - 5880 @ 10), (30)
+ (5865 - 5885 @ 20), (30)
+ (5870 - 5890 @ 10), (30)
+ (5880 - 5900 @ 10), (30)
+ (5890 - 5910 @ 10), (30)
+ (5895 - 5915 @ 20), (30)
+ (5900 - 5920 @ 10), (30)
+ (5910 - 5930 @ 10), (30)
+ # 60g band
+ # reference: http://cfr.regstoday.com/47cfr15.aspx#47_CFR_15p255
+ # channels 1,2,3, EIRP=40dBm(43dBm peak)
+ (57240 - 63720 @ 2160), (40)
+
+country UY: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5735 - 5835 @ 80), (30)
+
+country UZ: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (20), DFS, AUTO-BW
+
+country VC: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country VE: DFS-FCC
+ (2402 - 2482 @ 40), (30)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5735 - 5835 @ 80), (30)
+
+country VI: DFS-FCC
+ (2402 - 2472 @ 40), (30)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country VN: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country VU: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country WF: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country WS: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 40), (23)
+ (5250 - 5330 @ 40), (23), DFS
+ (5490 - 5710 @ 40), (30), DFS
+
+country XA: DFS-JP
+ (2402 - 2482 @ 40), (20)
+ (2474 - 2494 @ 20), (20), NO-OFDM
+ (5170 - 5250 @ 80), (20), NO-IR, AUTO-BW, NO-OUTDOOR
+ (5250 - 5330 @ 80), (20), DFS, AUTO-BW, NO-OUTDOOR
+ (5490 - 5710 @ 160), (20), DFS
+ (59000 - 66000 @ 2160), (10 mW)
+
+country YE:
+ (2402 - 2482 @ 40), (20)
+
+country YT: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS
+
+country ZA: DFS-FCC
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (24), AUTO-BW
+ (5250 - 5330 @ 80), (24), DFS, AUTO-BW
+ (5490 - 5730 @ 160), (24), DFS
+ (5735 - 5835 @ 80), (30)
+
+country ZW: DFS-ETSI
+ (2402 - 2482 @ 40), (20)
+ (5170 - 5250 @ 80), (23), AUTO-BW
+ (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (5490 - 5710 @ 160), (30), DFS