can: Proper ctrlmode handling for CAN devices
This patch adds error checking of ctrlmode values for CAN devices. As
an example all availabe bits are implemented in the mcp251x driver.
Signed-off-by: Christian Pellegrin <chripell@fsfe.org>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index f728749..a2f29a3 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1073,6 +1073,7 @@
priv->can.bittiming_const = &at91_bittiming_const;
priv->can.do_set_bittiming = at91_set_bittiming;
priv->can.do_set_mode = at91_set_mode;
+ priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
priv->reg_base = addr;
priv->dev = dev;
priv->clk = clk;
diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
index 7e1926e..bf7f9ba 100644
--- a/drivers/net/can/bfin_can.c
+++ b/drivers/net/can/bfin_can.c
@@ -603,6 +603,7 @@
priv->can.bittiming_const = &bfin_can_bittiming_const;
priv->can.do_set_bittiming = bfin_can_set_bittiming;
priv->can.do_set_mode = bfin_can_set_mode;
+ priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
return dev;
}
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index c1bb29f..f08f120 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -592,6 +592,8 @@
if (dev->flags & IFF_UP)
return -EBUSY;
cm = nla_data(data[IFLA_CAN_CTRLMODE]);
+ if (cm->flags & ~priv->ctrlmode_supported)
+ return -EOPNOTSUPP;
priv->ctrlmode &= ~cm->mask;
priv->ctrlmode |= cm->flags;
}
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index afa2fa4..bbe186b 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -539,9 +539,14 @@
if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
/* Put device into loopback mode */
mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LOOPBACK);
+ } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) {
+ /* Put device into listen-only mode */
+ mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LISTEN_ONLY);
} else {
/* Put device into normal mode */
- mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL);
+ mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL |
+ (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT ?
+ CANCTRL_OSM : 0));
/* Wait for the device to enter normal mode */
timeout = jiffies + HZ;
@@ -948,6 +953,10 @@
priv->can.bittiming_const = &mcp251x_bittiming_const;
priv->can.do_set_mode = mcp251x_do_set_mode;
priv->can.clock.freq = pdata->oscillator_frequency / 2;
+ priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
+ CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY;
+ if (pdata->model == CAN_MCP251X_MCP2515)
+ priv->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT;
priv->net = net;
dev_set_drvdata(&spi->dev, priv);
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 40827c1..6b7dd57 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -686,6 +686,7 @@
priv->can.bittiming_const = &mscan_bittiming_const;
priv->can.do_set_bittiming = mscan_do_set_bittiming;
priv->can.do_set_mode = mscan_do_set_mode;
+ priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
for (i = 0; i < TX_QUEUE_SIZE; i++) {
priv->tx_queue[i].id = i;
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 345304d..ace103a 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -567,6 +567,7 @@
priv->can.bittiming_const = &sja1000_bittiming_const;
priv->can.do_set_bittiming = sja1000_set_bittiming;
priv->can.do_set_mode = sja1000_set_mode;
+ priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
if (sizeof_priv)
priv->priv = (void *)priv + sizeof(struct sja1000_priv);
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 7d370e3..8332e24 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -909,6 +909,7 @@
priv->can.bittiming_const = &ti_hecc_bittiming_const;
priv->can.do_set_mode = ti_hecc_do_set_mode;
priv->can.do_get_state = ti_hecc_get_state;
+ priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
ndev->irq = irq->start;
ndev->flags |= IFF_ECHO;
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index ddb17e2..bfab283 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -1022,6 +1022,7 @@
dev->can.bittiming_const = &ems_usb_bittiming_const;
dev->can.do_set_bittiming = ems_usb_set_bittiming;
dev->can.do_set_mode = ems_usb_set_mode;
+ dev->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
netdev->flags |= IFF_ECHO; /* we support local echo */