[MIPS] Sort system types alphabetically
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a3ee9b7..0893e08 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -15,29 +15,6 @@
prompt "System type"
default SGI_IP22
-config LEMOTE_FULONG
- bool "Lemote Fulong mini-PC"
- select ARCH_SPARSEMEM_ENABLE
- select SYS_HAS_CPU_LOONGSON2
- select DMA_NONCOHERENT
- select BOOT_ELF32
- select BOARD_SCACHE
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select I8259
- select ISA
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_HAS_EARLY_PRINTK
- select GENERIC_HARDIRQS_NO__DO_IRQ
- select CPU_HAS_WB
- help
- Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
- an FPGA northbridge
-
config MACH_ALCHEMY
bool "Alchemy processor based machines"
@@ -131,6 +108,29 @@
Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
Olivetti M700-10 workstations.
+config LEMOTE_FULONG
+ bool "Lemote Fulong mini-PC"
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_HAS_CPU_LOONGSON2
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select BOARD_SCACHE
+ select HAVE_STD_PC_SERIAL_PORT
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select IRQ_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_HAS_EARLY_PRINTK
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select CPU_HAS_WB
+ help
+ Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
+ an FPGA northbridge
+
config MIPS_ATLAS
bool "MIPS Atlas board"
select BOOT_ELF32
@@ -210,27 +210,6 @@
This enables support for the MIPS Technologies SEAD evaluation
board.
-config WR_PPMC
- bool "Wind River PPMC board"
- select IRQ_CPU
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select PCI_GT64XXX_PCI0
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_CPU_MIPS64_R1
- select SYS_HAS_CPU_NEVADA
- select SYS_HAS_CPU_RM7000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the Wind River MIPS32 4KC PPMC evaluation
- board, which is based on GT64120 bridge chip.
-
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
@@ -266,16 +245,6 @@
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
Momentum Computer <http://www.momenco.com/>.
-config PNX8550_JBS
- bool "Philips PNX8550 based JBS board"
- select PNX8550
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config PNX8550_STB810
- bool "Philips PNX8550 based STB810 board"
- select PNX8550
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
config DDB5477
bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
@@ -296,11 +265,35 @@
Features : kernel debugging, serial terminal, NFS root fs, on-board
ether port USB, AC97, PCI, etc.
+config MARKEINS
+ bool "NEC EMMA2RH Mark-eins"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_CPU_R5000
+ help
+ This enables support for the R5432-based NEC Mark-eins
+ boards with R5500 CPU.
+
config MACH_VR41XX
bool "NEC VR4100 series based machines"
select SYS_HAS_CPU_VR41XX
select GENERIC_HARDIRQS_NO__DO_IRQ
+config PNX8550_JBS
+ bool "Philips PNX8550 based JBS board"
+ select PNX8550
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PNX8550_STB810
+ bool "Philips PNX8550 based STB810 board"
+ select PNX8550
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
config PMC_MSP
bool "PMC-Sierra MSP chipsets"
depends on EXPERIMENTAL
@@ -367,20 +360,6 @@
simulate actual MIPS hardware platforms. More information on Qemu
can be found at http://www.linux-mips.org/wiki/Qemu.
-config MARKEINS
- bool "NEC EMMA2RH Mark-eins"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_HAS_CPU_R5000
- help
- This enables support for the R5432-based NEC Mark-eins
- boards with R5500 CPU.
-
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
select ARC
@@ -443,56 +422,8 @@
help
If you want this kernel to run on SGI O2 workstation, say Y here.
-config SIBYTE_BIGSUR
- bool "Sibyte BCM91480B-BigSur"
- select BOOT_ELF32
- select DMA_COHERENT
- select NR_CPUS_DEFAULT_4
- select PCI_DOMAINS
- select SIBYTE_BCM1x80
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_SB1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config SIBYTE_SWARM
- bool "Sibyte BCM91250A-SWARM"
- select BOOT_ELF32
- select DMA_COHERENT
- select NR_CPUS_DEFAULT_2
- select SIBYTE_SB1250
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_SB1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_KGDB
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config SIBYTE_SENTOSA
- bool "Sibyte BCM91250E-Sentosa"
- depends on EXPERIMENTAL
- select BOOT_ELF32
- select DMA_COHERENT
- select NR_CPUS_DEFAULT_2
- select SIBYTE_SB1250
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_SB1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config SIBYTE_RHONE
- bool "Sibyte BCM91125E-Rhone"
- depends on EXPERIMENTAL
- select BOOT_ELF32
- select DMA_COHERENT
- select SIBYTE_BCM1125H
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_SB1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config SIBYTE_CARMEL
- bool "Sibyte BCM91120x-Carmel"
+config SIBYTE_CRHINE
+ bool "Sibyte BCM91120C-CRhine"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -502,34 +433,8 @@
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
-config SIBYTE_PTSWARM
- bool "Sibyte BCM91250PT-PTSWARM"
- depends on EXPERIMENTAL
- select BOOT_ELF32
- select DMA_COHERENT
- select NR_CPUS_DEFAULT_2
- select SIBYTE_SB1250
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_SB1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config SIBYTE_LITTLESUR
- bool "Sibyte BCM91250C2-LittleSur"
- depends on EXPERIMENTAL
- select BOOT_ELF32
- select DMA_COHERENT
- select NR_CPUS_DEFAULT_2
- select SIBYTE_SB1250
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_SB1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config SIBYTE_CRHINE
- bool "Sibyte BCM91120C-CRhine"
+config SIBYTE_CARMEL
+ bool "Sibyte BCM91120x-Carmel"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -551,6 +456,80 @@
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
+config SIBYTE_RHONE
+ bool "Sibyte BCM91125E-Rhone"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_BCM1125H
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_SWARM
+ bool "Sibyte BCM91250A-SWARM"
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_KGDB
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_LITTLESUR
+ bool "Sibyte BCM91250C2-LittleSur"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_SENTOSA
+ bool "Sibyte BCM91250E-Sentosa"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_PTSWARM
+ bool "Sibyte BCM91250PT-PTSWARM"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_BIGSUR
+ bool "Sibyte BCM91480B-BigSur"
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select NR_CPUS_DEFAULT_4
+ select PCI_DOMAINS
+ select SIBYTE_BCM1x80
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
config SNI_RM
bool "SNI RM200/300/400"
select ARC if CPU_LITTLE_ENDIAN
@@ -632,6 +611,27 @@
This Toshiba board is based on the TX4938 processor. Say Y here to
support this machine type
+config WR_PPMC
+ bool "Wind River PPMC board"
+ select IRQ_CPU
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select PCI_GT64XXX_PCI0
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_NEVADA
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the Wind River MIPS32 4KC PPMC evaluation
+ board, which is based on GT64120 bridge chip.
+
endchoice
source "arch/mips/au1000/Kconfig"