advansys: Remove 'TRUE' and 'FALSE' definitions
Use 'bool' type instead.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 4e52625..9c32977 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -78,13 +78,6 @@
typedef unsigned char uchar;
-#ifndef TRUE
-#define TRUE (1)
-#endif
-#ifndef FALSE
-#define FALSE (0)
-#endif
-
#define ERR (-1)
#define UW_ERR (uint)(0xFFFF)
#define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0)
@@ -556,7 +549,7 @@
dma_addr_t overrun_dma;
uchar scsi_reset_wait;
uchar chip_no;
- char is_in_int;
+ bool is_in_int;
uchar max_total_qng;
uchar cur_total_qng;
uchar in_critical_cnt;
@@ -3754,7 +3747,7 @@
return (1);
}
-static int AscStopChip(PortAddr iop_base)
+static bool AscStopChip(PortAddr iop_base)
{
uchar cc_val;
@@ -3765,9 +3758,9 @@
AscSetChipIH(iop_base, INS_HALT);
AscSetChipIH(iop_base, INS_RFLAG_WTM);
if ((AscGetChipStatus(iop_base) & CSW_HALTED) == 0) {
- return (0);
+ return false;
}
- return (1);
+ return true;
}
static bool AscIsChipHalted(PortAddr iop_base)
@@ -6453,7 +6446,7 @@
EXT_MSG ext_msg;
EXT_MSG out_msg;
ushort halt_q_addr;
- int sdtr_accept;
+ bool sdtr_accept;
ushort int_halt_code;
ASC_SCSI_BIT_ID_TYPE scsi_busy;
ASC_SCSI_BIT_ID_TYPE target_id;
@@ -6512,10 +6505,10 @@
if (ext_msg.msg_type == EXTENDED_MESSAGE &&
ext_msg.msg_req == EXTENDED_SDTR &&
ext_msg.msg_len == MS_SDTR_LEN) {
- sdtr_accept = TRUE;
+ sdtr_accept = true;
if ((ext_msg.req_ack_offset > ASC_SYN_MAX_OFFSET)) {
- sdtr_accept = FALSE;
+ sdtr_accept = false;
ext_msg.req_ack_offset = ASC_SYN_MAX_OFFSET;
}
if ((ext_msg.xfer_period <
@@ -6523,7 +6516,7 @@
|| (ext_msg.xfer_period >
asc_dvc->sdtr_period_tbl[asc_dvc->
max_sdtr_index])) {
- sdtr_accept = FALSE;
+ sdtr_accept = false;
ext_msg.xfer_period =
asc_dvc->sdtr_period_tbl[asc_dvc->
min_sdtr_index];
@@ -7111,7 +7104,7 @@
uchar cur_target_qng;
ASC_QDONE_INFO scsiq_buf;
ASC_QDONE_INFO *scsiq;
- int false_overrun;
+ bool false_overrun;
iop_base = asc_dvc->iop_base;
n_q_used = 1;
@@ -7189,7 +7182,11 @@
((scsiq->q_status & QS_ABORTED) != 0)) {
return (0x11);
} else if (scsiq->q_status == QS_DONE) {
- false_overrun = FALSE;
+ /*
+ * This is also curious.
+ * false_overrun will _always_ be set to 'false'
+ */
+ false_overrun = false;
if (scsiq->extra_bytes != 0) {
scsiq->remain_bytes += scsiq->extra_bytes;
}
@@ -7262,23 +7259,23 @@
uchar host_flag;
iop_base = asc_dvc->iop_base;
- int_pending = FALSE;
+ int_pending = ASC_FALSE;
if (AscIsIntPending(iop_base) == 0)
return int_pending;
if ((asc_dvc->init_state & ASC_INIT_STATE_END_LOAD_MC) == 0) {
- return ERR;
+ return ASC_ERROR;
}
if (asc_dvc->in_critical_cnt != 0) {
AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_ON_CRITICAL);
- return ERR;
+ return ASC_ERROR;
}
if (asc_dvc->is_in_int) {
AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_RE_ENTRY);
- return ERR;
+ return ASC_ERROR;
}
- asc_dvc->is_in_int = TRUE;
+ asc_dvc->is_in_int = true;
ctrl_reg = AscGetChipControl(iop_base);
saved_ctrl_reg = ctrl_reg & (~(CC_SCSI_RESET | CC_CHIP_RESET |
CC_SINGLE_STEP | CC_DIAG | CC_TEST));
@@ -7286,7 +7283,7 @@
if (chipstat & CSW_SCSI_RESET_LATCH) {
if (!(asc_dvc->bus_type & (ASC_IS_VL | ASC_IS_EISA))) {
int i = 10;
- int_pending = TRUE;
+ int_pending = ASC_TRUE;
asc_dvc->sdtr_done = 0;
saved_ctrl_reg &= (uchar)(~CC_HALT);
while ((AscGetChipStatus(iop_base) &
@@ -7308,7 +7305,7 @@
(uchar)(host_flag | (uchar)ASC_HOST_FLAG_IN_ISR));
if ((chipstat & CSW_INT_PENDING) || (int_pending)) {
AscAckInterrupt(iop_base);
- int_pending = TRUE;
+ int_pending = ASC_TRUE;
if ((chipstat & CSW_HALTED) && (ctrl_reg & CC_SINGLE_STEP)) {
if (AscIsrChipHalted(asc_dvc) == ERR) {
goto ISR_REPORT_QDONE_FATAL_ERROR;
@@ -7330,13 +7327,13 @@
} while (status == 0x11);
}
if ((status & 0x80) != 0)
- int_pending = ERR;
+ int_pending = ASC_ERROR;
}
}
AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag);
AscSetChipLramAddr(iop_base, saved_ram_addr);
AscSetChipControl(iop_base, saved_ctrl_reg);
- asc_dvc->is_in_int = FALSE;
+ asc_dvc->is_in_int = false;
return int_pending;
}
@@ -8423,7 +8420,7 @@
PortAddr iop_base;
int sta;
int n_q_required;
- int disable_syn_offset_one_fix;
+ bool disable_syn_offset_one_fix;
int i;
u32 addr;
ushort sg_entry_cnt = 0;
@@ -8488,7 +8485,7 @@
sg_entry_cnt_minus_one = sg_entry_cnt - 1;
}
scsi_cmd = scsiq->cdbptr[0];
- disable_syn_offset_one_fix = FALSE;
+ disable_syn_offset_one_fix = false;
if ((asc_dvc->pci_fix_asyn_xfer & scsiq->q1.target_id) &&
!(asc_dvc->pci_fix_asyn_xfer_always & scsiq->q1.target_id)) {
if (scsiq->q1.cntl & QC_SG_HEAD) {
@@ -8502,7 +8499,7 @@
}
if (data_cnt != 0UL) {
if (data_cnt < 512UL) {
- disable_syn_offset_one_fix = TRUE;
+ disable_syn_offset_one_fix = true;
} else {
for (i = 0; i < ASC_SYN_OFFSET_ONE_DISABLE_LIST;
i++) {
@@ -8513,7 +8510,7 @@
}
if (scsi_cmd == disable_cmd) {
disable_syn_offset_one_fix =
- TRUE;
+ true;
break;
}
}
@@ -9058,7 +9055,7 @@
/* asc_dvc->init_state initialized in AscInitGetConfig(). */
asc_dvc->sdtr_done = 0;
asc_dvc->cur_total_qng = 0;
- asc_dvc->is_in_int = 0;
+ asc_dvc->is_in_int = false;
asc_dvc->in_critical_cnt = 0;
asc_dvc->last_q_shortage = 0;
asc_dvc->use_tagged_qng = 0;
@@ -9238,7 +9235,7 @@
int retry;
retry = 0;
- while (TRUE) {
+ while (true) {
AscSetChipEEPData(iop_base, data_reg);
mdelay(1);
read_back = AscGetChipEEPData(iop_base);
@@ -9374,7 +9371,7 @@
int n_error;
retry = 0;
- while (TRUE) {
+ while (true) {
if ((n_error = AscSetEEPConfigOnce(iop_base, cfg_buf,
bus_type)) == 0) {
break;
@@ -9401,7 +9398,7 @@
warn_code = 0;
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0x00FE);
AscStopQueueExe(iop_base);
- if ((AscStopChip(iop_base) == FALSE) ||
+ if ((AscStopChip(iop_base)) ||
(AscGetChipScsiCtrl(iop_base) != 0)) {
asc_dvc->init_state |= ASC_INIT_RESET_SCSI_DONE;
AscResetChipAndScsiBus(asc_dvc);
@@ -11093,7 +11090,7 @@
* must be set. The flag will be cleared in advansys_board_found
* for non-ISA adapters.
*/
- .unchecked_isa_dma = 1,
+ .unchecked_isa_dma = true,
/*
* All adapters controlled by this driver are capable of large
* scatter-gather lists. According to the mid-level SCSI documentation
@@ -11269,28 +11266,28 @@
switch (asc_dvc_varp->bus_type) {
#ifdef CONFIG_ISA
case ASC_IS_ISA:
- shost->unchecked_isa_dma = TRUE;
+ shost->unchecked_isa_dma = true;
share_irq = 0;
break;
case ASC_IS_VL:
- shost->unchecked_isa_dma = FALSE;
+ shost->unchecked_isa_dma = false;
share_irq = 0;
break;
case ASC_IS_EISA:
- shost->unchecked_isa_dma = FALSE;
+ shost->unchecked_isa_dma = false;
share_irq = IRQF_SHARED;
break;
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
case ASC_IS_PCI:
- shost->unchecked_isa_dma = FALSE;
+ shost->unchecked_isa_dma = false;
share_irq = IRQF_SHARED;
break;
#endif /* CONFIG_PCI */
default:
shost_printk(KERN_ERR, shost, "unknown adapter type: "
"%d\n", asc_dvc_varp->bus_type);
- shost->unchecked_isa_dma = TRUE;
+ shost->unchecked_isa_dma = false;
share_irq = 0;
break;
}
@@ -11309,7 +11306,7 @@
* For Wide boards set PCI information before calling
* AdvInitGetConfig().
*/
- shost->unchecked_isa_dma = FALSE;
+ shost->unchecked_isa_dma = false;
share_irq = IRQF_SHARED;
ASC_DBG(2, "AdvInitGetConfig()\n");