hwmon: (lm90) Add support for GMT G781
GMT G781 is a ADM1032-compatible temperature sensor chip.
Add support to the LM90 driver.
Cc: Mike Gorchak <lestat@i.com.ua>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 22efae3..3309a51 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -57,6 +57,9 @@
* This driver also supports the SA56004 from Philips. This device is
* pin-compatible with the LM86, the ED/EDP parts are also address-compatible.
*
+ * This driver also supports the G781 from GMT. This device is compatible
+ * with the ADM1032.
+ *
* Since the LM90 was the first chipset supported by this driver, most
* comments will refer to this chipset, but are actually general and
* concern all supported chipsets, unless mentioned otherwise.
@@ -107,7 +110,7 @@
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
- max6646, w83l771, max6696, sa56004 };
+ max6646, w83l771, max6696, sa56004, g781 };
/*
* The LM90 registers
@@ -184,6 +187,7 @@
{ "adm1032", adm1032 },
{ "adt7461", adt7461 },
{ "adt7461a", adt7461 },
+ { "g781", g781 },
{ "lm90", lm90 },
{ "lm86", lm86 },
{ "lm89", lm86 },
@@ -229,6 +233,12 @@
.alert_alarms = 0x7c,
.max_convrate = 10,
},
+ [g781] = {
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+ | LM90_HAVE_BROKEN_ALERT,
+ .alert_alarms = 0x7c,
+ .max_convrate = 8,
+ },
[lm86] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
.alert_alarms = 0x7b,
@@ -1289,6 +1299,13 @@
&& convrate <= 0x09) {
name = "sa56004";
}
+ } else
+ if ((address == 0x4C || address == 0x4D)
+ && man_id == 0x47) { /* GMT */
+ if (chip_id == 0x01 /* G781 */
+ && (config1 & 0x3F) == 0x00
+ && convrate <= 0x08)
+ name = "g781";
}
if (!name) { /* identification failed */