rtc: kconfig cleanup
Remove double spaces and adds some suggestions. It also fixes the
descriptions of options that are no more available as modules.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index fe1d7a2..92c2db6 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -35,8 +35,8 @@
default "rtc0"
help
The RTC device that will be used to (re)initialize the system
- clock, usually rtc0. Initialization is done when the system
- starts up, and when it resumes from a low power state. This
+ clock, usually rtc0. Initialization is done when the system
+ starts up, and when it resumes from a low power state. This
device should record time in UTC, since the kernel won't do
timezone correction.
@@ -44,7 +44,7 @@
functions run, so it must usually be statically linked.
This clock should be battery-backed, so that it reads the correct
- time when the system boots from a power-off state. Otherwise, your
+ time when the system boots from a power-off state. Otherwise, your
system will need an external clock source (like an NTP server).
If the clock you specify here is not battery backed, it may still
@@ -69,8 +69,7 @@
Say yes here if you want to use your RTCs using sysfs interfaces,
/sys/class/rtc/rtc0 through /sys/.../rtcN.
- This driver can also be built as a module. If so, the module
- will be called rtc-sysfs.
+ If unsure, say Y.
config RTC_INTF_PROC
boolean "/proc/driver/rtc (procfs for rtc0)"
@@ -78,11 +77,10 @@
default RTC_CLASS
help
Say yes here if you want to use your first RTC through the proc
- interface, /proc/driver/rtc. Other RTCs will not be available
+ interface, /proc/driver/rtc. Other RTCs will not be available
through that API.
- This driver can also be built as a module. If so, the module
- will be called rtc-proc.
+ If unsure, say Y.
config RTC_INTF_DEV
boolean "/dev/rtcN (character devices)"
@@ -90,12 +88,14 @@
help
Say yes here if you want to use your RTCs using the /dev
interfaces, which "udev" sets up as /dev/rtc0 through
- /dev/rtcN. You may want to set up a symbolic link so one
- of these can be accessed as /dev/rtc, which is a name
- expected by "hwclock" and some other programs.
+ /dev/rtcN.
- This driver can also be built as a module. If so, the module
- will be called rtc-dev.
+ You may want to set up a symbolic link so one of these
+ can be accessed as /dev/rtc, which is a name
+ expected by "hwclock" and some other programs. Recent
+ versions of "udev" are known to set up the symlink for you.
+
+ If unsure, say Y.
config RTC_INTF_DEV_UIE_EMUL
bool "RTC UIE emulation on dev interface"
@@ -132,14 +132,14 @@
tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00"
help
If you say yes here you get support for various compatible RTC
- chips (often with battery backup) connected with I2C. This driver
+ chips (often with battery backup) connected with I2C. This driver
should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00,
- and probably other chips. In some cases the RTC must already
+ and probably other chips. In some cases the RTC must already
have been initialized (by manufacturing or a bootloader).
The first seven registers on these chips hold an RTC, and other
registers may add features such as NVRAM, a trickle charger for
- the RTC/NVRAM backup power, and alarms. NVRAM is visible in
+ the RTC/NVRAM backup power, and alarms. NVRAM is visible in
sysfs, but other chip features may not be available.
This driver can also be built as a module. If so, the module
@@ -150,10 +150,10 @@
depends on RTC_CLASS && I2C
help
If you say yes here you get support for Dallas Semiconductor
- DS1374 real-time clock chips. If an interrupt is associated
+ DS1374 real-time clock chips. If an interrupt is associated
with the device, the alarm functionality is supported.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called rtc-ds1374.
config RTC_DRV_DS1672
@@ -247,7 +247,7 @@
help
If you say yes here you get support for the RTC on the
TWL92330 "Menelaus" power management chip, used with OMAP2
- platforms. The support is integrated with the rest of
+ platforms. The support is integrated with the rest of
the Menelaus driver; it's not separate module.
config RTC_DRV_TWL4030
@@ -308,7 +308,7 @@
tristate "Dallas/Maxim DS1305/DS1306"
help
Select this driver to get support for the Dallas/Maxim DS1305
- and DS1306 real time clock chips. These support a trickle
+ and DS1306 real time clock chips. These support a trickle
charger, alarms, and NVRAM in addition to the clock.
This driver can also be built as a module. If so, the module
@@ -382,7 +382,7 @@
or LPC bus chips, and so on.
Your system will need to define the platform device used by
- this driver, otherwise it won't be accessible. This means
+ this driver, otherwise it won't be accessible. This means
you can safely enable this driver if you don't know whether
or not your board has this kind of hardware.
@@ -599,7 +599,7 @@
depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL
help
Driver for the internal RTC (Realtime Clock) module found on
- Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips
+ Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips
this is powered by the backup power supply.
config RTC_DRV_AT91SAM9
@@ -621,8 +621,8 @@
prompt "RTT module Number" if ARCH_AT91SAM9263
depends on RTC_DRV_AT91SAM9
help
- More than one RTT module is available. You can choose which
- one will be used as an RTC. The default of zero is normally
+ More than one RTT module is available. You can choose which
+ one will be used as an RTC. The default of zero is normally
OK to use, though some systems use that for non-RTC purposes.
config RTC_DRV_AT91SAM9_GPBR
@@ -634,8 +634,8 @@
depends on RTC_DRV_AT91SAM9
help
The RTC driver needs to use one of the General Purpose Backup
- Registers (GPBRs) as well as the RTT. You can choose which one
- will be used. The default of zero is normally OK to use, but
+ Registers (GPBRs) as well as the RTT. You can choose which one
+ will be used. The default of zero is normally OK to use, but
on some systems other software needs to use that register.
config RTC_DRV_BFIN