mpt2sas, mpt3sas: Remove SCSI_MPTXSAS_LOGGING entry from Kconfig
Currently there is a logging level option provided for each of our
drivers in the kernel configuration utility. Users can enable this
option to get more verbose information. By default it is enabled.
Only when this option is enabled will the functions which display the
required information get compiled in.
As we are merging the both drivers we can no longer provide this
configuration option. Remove the SCSI_MPTXSAS_LOGGING entry from Kconfig
and unconditionally enable logging (by removing the #ifdef
CONFIG_SCSI_MPT3SAS_LOGGING preprocessor check conditions) so that all
functions which are defined to display more verbose information get
compiled in.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/drivers/scsi/mpt2sas/Kconfig b/drivers/scsi/mpt2sas/Kconfig
index 657b45c..1356a0a 100644
--- a/drivers/scsi/mpt2sas/Kconfig
+++ b/drivers/scsi/mpt2sas/Kconfig
@@ -59,9 +59,3 @@
SAFE_PHYS_SEGMENTS. However, it may decreased down to 16.
Decreasing this parameter will reduce memory requirements
on a per controller instance.
-
-config SCSI_MPT2SAS_LOGGING
- bool "LSI MPT Fusion logging facility"
- depends on PCI && SCSI && SCSI_MPT2SAS
- ---help---
- This turns on a logging facility.
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
index 4d235dd..18b64bc 100644
--- a/drivers/scsi/mpt3sas/Kconfig
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -59,9 +59,3 @@
MAX_PHYS_SEGMENTS in most kernels. However in SuSE kernels this
can be 256. However, it may decreased down to 16. Decreasing this
parameter will reduce memory requirements on a per controller instance.
-
-config SCSI_MPT3SAS_LOGGING
- bool "LSI MPT Fusion logging facility"
- depends on PCI && SCSI && SCSI_MPT3SAS
- ---help---
- This turns on a logging facility.
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 8a7f93e..31d0ca8 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -324,7 +324,6 @@
panic("panic in %s\n", __func__);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _base_sas_ioc_info - verbose translation of the ioc status
* @ioc: per adapter object
@@ -630,7 +629,6 @@
pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc);
}
-#endif
/**
* _base_sas_log_info - verbose translation of firmware log info
@@ -710,13 +708,13 @@
return;
}
ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
(ioc->logging_level & MPT_DEBUG_REPLY)) {
_base_sas_ioc_info(ioc , mpi_reply,
mpt3sas_base_get_msg_frame(ioc, smid));
}
-#endif
+
if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
_base_sas_log_info(ioc, loginfo);
@@ -783,9 +781,9 @@
return 1;
if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
return 1;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
_base_display_event_data(ioc, mpi_reply);
-#endif
+
if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
goto out;
smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index e45c461..53eb701 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -83,7 +83,6 @@
dma_addr_t page_dma;
};
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _config_display_some_debug - debug routine
* @ioc: per adapter object
@@ -173,7 +172,6 @@
ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo));
}
-#endif
/**
* _config_alloc_config_dma_memory - obtain physical memory
@@ -255,9 +253,7 @@
mpi_reply->MsgLength*4);
}
ioc->config_cmds.status &= ~MPT3_CMD_PENDING;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
-#endif
ioc->config_cmds.smid = USHRT_MAX;
complete(&ioc->config_cmds.done);
return 1;
@@ -387,9 +383,7 @@
config_request = mpt3sas_base_get_msg_frame(ioc, smid);
ioc->config_cmds.smid = smid;
memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_config_display_some_debug(ioc, smid, "config_request", NULL);
-#endif
init_completion(&ioc->config_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 8b46cbf..5c08d31 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -78,7 +78,6 @@
BLOCKING,
};
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _ctl_sas_device_find_by_handle - sas device search
* @ioc: per adapter object
@@ -254,8 +253,6 @@
}
}
-#endif
-
/**
* mpt3sas_ctl_done - ctl module completion routine
* @ioc: per adapter object
@@ -302,9 +299,7 @@
}
}
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
-#endif
ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
complete(&ioc->ctl_cmds.done);
return 1;
@@ -759,9 +754,7 @@
psge = (void *)request + (karg.data_sge_offset*4);
/* send command to firmware */
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
-#endif
init_completion(&ioc->ctl_cmds.done);
switch (mpi_request->Function) {
@@ -916,7 +909,6 @@
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
(ioc->logging_level & MPT_DEBUG_TM)) {
Mpi2SCSITaskManagementReply_t *tm_reply =
@@ -929,7 +921,7 @@
le32_to_cpu(tm_reply->IOCLogInfo),
le32_to_cpu(tm_reply->TerminationCount));
}
-#endif
+
/* copy out xdata to user */
if (data_in_sz) {
if (copy_to_user(karg.data_in_buf_ptr, data_in,
diff --git a/drivers/scsi/mpt3sas/mpt3sas_debug.h b/drivers/scsi/mpt3sas/mpt3sas_debug.h
index 4e8a63f..cceeb2c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_debug.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_debug.h
@@ -68,20 +68,11 @@
#define MPT_DEBUG_TRIGGER_DIAG 0x00200000
-/*
- * CONFIG_SCSI_MPT3SAS_LOGGING - enabled in Kconfig
- */
-
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
#define MPT_CHECK_LOGGING(IOC, CMD, BITS) \
{ \
if (IOC->logging_level & BITS) \
CMD; \
}
-#else
-#define MPT_CHECK_LOGGING(IOC, CMD, BITS)
-#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */
-
/*
* debug macros
@@ -153,7 +144,7 @@
/* inline functions for dumping debug data*/
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
/**
* _debug_dump_mf - print message frame contents
* @mpi_request: pointer to message frame
@@ -211,10 +202,5 @@
}
pr_info("\n");
}
-#else
-#define _debug_dump_mf(mpi_request, sz)
-#define _debug_dump_reply(mpi_request, sz)
-#define _debug_dump_config(mpi_request, sz)
-#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */
#endif /* MPT3SAS_DEBUG_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 233627d..a638920 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3624,10 +3624,8 @@
u16 smid;
u16 handle;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_SCSI)
scsi_print_command(scmd);
-#endif
sas_device_priv_data = scmd->device->hostdata;
if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
@@ -3758,7 +3756,6 @@
}
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
* @ioc: per adapter object
@@ -3971,7 +3968,6 @@
_scsih_response_code(ioc, response_bytes[0]);
}
}
-#endif
/**
* _scsih_turn_on_pfa_led - illuminate PFA LED
@@ -4239,13 +4235,11 @@
le16_to_cpu(mpi_reply->DevHandle));
mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq);
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (!(ioc->logging_level & MPT_DEBUG_REPLY) &&
((scmd->sense_buffer[2] == UNIT_ATTENTION) ||
(scmd->sense_buffer[2] == MEDIUM_ERROR) ||
(scmd->sense_buffer[2] == HARDWARE_ERROR)))
_scsih_scsi_ioc_info(ioc, scmd, mpi_reply, smid);
-#endif
}
switch (ioc_status) {
case MPI2_IOCSTATUS_BUSY:
@@ -4352,10 +4346,8 @@
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
_scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
-#endif
out:
@@ -5152,7 +5144,6 @@
kfree(sas_device);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_topology_change_event_debug - debug for topology event
* @ioc: per adapter object
@@ -5230,7 +5221,6 @@
}
}
-#endif
/**
* _scsih_sas_topology_change_event - handle topology changes
@@ -5255,10 +5245,8 @@
(Mpi2EventDataSasTopologyChangeList_t *)
fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_topology_change_event_debug(ioc, event_data);
-#endif
if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
return 0;
@@ -5364,7 +5352,6 @@
return 0;
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_device_status_change_event_debug - debug for device event
* @event_data: event data payload
@@ -5432,7 +5419,6 @@
event_data->ASC, event_data->ASCQ);
pr_info("\n");
}
-#endif
/**
* _scsih_sas_device_status_change_event - handle device status change
@@ -5454,11 +5440,9 @@
(Mpi2EventDataSasDeviceStatusChange_t *)
fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_device_status_change_event_debug(ioc,
event_data);
-#endif
/* In MPI Revision K (0xC), the internal device reset complete was
* implemented, so avoid setting tm_busy flag for older firmware.
@@ -5496,7 +5480,6 @@
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure
* event
@@ -5531,7 +5514,6 @@
(unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
le16_to_cpu(event_data->StartSlot));
}
-#endif
/**
* _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
@@ -5545,12 +5527,10 @@
_scsih_sas_enclosure_dev_status_change_event(struct MPT3SAS_ADAPTER *ioc,
struct fw_event_work *fw_event)
{
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_enclosure_dev_status_change_event_debug(ioc,
(Mpi2EventDataSasEnclDevStatusChange_t *)
fw_event->event_data);
-#endif
}
/**
@@ -5730,17 +5710,15 @@
Mpi2EventDataSasDiscovery_t *event_data =
(Mpi2EventDataSasDiscovery_t *) fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
pr_info(MPT3SAS_FMT "discovery event: (%s)", ioc->name,
(event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
"start" : "stop");
- if (event_data->DiscoveryStatus)
- pr_info("discovery_status(0x%08x)",
- le32_to_cpu(event_data->DiscoveryStatus));
- pr_info("\n");
+ if (event_data->DiscoveryStatus)
+ pr_info("discovery_status(0x%08x)",
+ le32_to_cpu(event_data->DiscoveryStatus));
+ pr_info("\n");
}
-#endif
if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
!ioc->sas_hba.num_phys) {
@@ -6117,7 +6095,6 @@
_scsih_add_device(ioc, handle, 0, 1);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
* @ioc: per adapter object
@@ -6197,7 +6174,6 @@
element->PhysDiskNum);
}
}
-#endif
/**
* _scsih_sas_ir_config_change_event - handle ir configuration change events
@@ -6218,12 +6194,9 @@
(Mpi2EventDataIrConfigChangeList_t *)
fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_ir_config_change_event_debug(ioc, event_data);
-#endif
-
foreign_config = (le32_to_cpu(event_data->Flags) &
MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
@@ -6435,7 +6408,6 @@
}
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_ir_operation_status_event_debug - debug for IR op event
* @ioc: per adapter object
@@ -6477,7 +6449,6 @@
le16_to_cpu(event_data->VolDevHandle),
event_data->PercentComplete);
}
-#endif
/**
* _scsih_sas_ir_operation_status_event - handle RAID operation events
@@ -6498,11 +6469,9 @@
unsigned long flags;
u16 handle;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_ir_operation_status_event_debug(ioc,
event_data);
-#endif
/* code added for raid transport support */
if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {