iwlwifi: kill bus_apm_config
This handler was called from the transport layer only. Merge it
to the transport's apm_init.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-bus.h b/drivers/net/wireless/iwlwifi/iwl-bus.h
index 2065c5b..d385f69 100644
--- a/drivers/net/wireless/iwlwifi/iwl-bus.h
+++ b/drivers/net/wireless/iwlwifi/iwl-bus.h
@@ -121,13 +121,11 @@
/**
* struct iwl_bus_ops - bus specific operations
* @get_pm_support: must returns true if the bus can go to sleep
- * @apm_config: will be called during the config of the APM
* @get_hw_id_string: prints the hw_id in the provided buffer
* @get_hw_id: get hw_id in u32
*/
struct iwl_bus_ops {
bool (*get_pm_support)(struct iwl_bus *bus);
- void (*apm_config)(struct iwl_bus *bus);
void (*get_hw_id_string)(struct iwl_bus *bus, char buf[], int buf_len);
u32 (*get_hw_id)(struct iwl_bus *bus);
};
@@ -156,11 +154,6 @@
return bus->ops->get_pm_support(bus);
}
-static inline void bus_apm_config(struct iwl_bus *bus)
-{
- bus->ops->apm_config(bus);
-}
-
static inline void bus_get_hw_id_string(struct iwl_bus *bus, char buf[],
int buf_len)
{
diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c
index 6451739..353022d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-pci.c
+++ b/drivers/net/wireless/iwlwifi/iwl-pci.c
@@ -106,34 +106,6 @@
return !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
}
-static void iwl_pci_apm_config(struct iwl_bus *bus)
-{
- /*
- * HW bug W/A for instability in PCIe bus L0S->L1 transition.
- * Check if BIOS (or OS) enabled L1-ASPM on this device.
- * If so (likely), disable L0S, so device moves directly L0->L1;
- * costs negligible amount of power savings.
- * If not (unlikely), enable L0S, so there is at least some
- * power savings, even without L1.
- */
- u16 lctl = iwl_pciexp_link_ctrl(bus);
-
- if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
- PCI_CFG_LINK_CTRL_VAL_L1_EN) {
- /* L1-ASPM enabled; disable(!) L0S */
- iwl_set_bit(trans(bus), CSR_GIO_REG,
- CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_printk(KERN_INFO, trans(bus)->dev,
- "L1 Enabled; Disabling L0S\n");
- } else {
- /* L1-ASPM disabled; enable(!) L0S */
- iwl_clear_bit(trans(bus), CSR_GIO_REG,
- CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_printk(KERN_INFO, trans(bus)->dev,
- "L1 Disabled; Enabling L0S\n");
- }
-}
-
static void iwl_pci_get_hw_id_string(struct iwl_bus *bus, char buf[],
int buf_len)
{
@@ -152,7 +124,6 @@
static const struct iwl_bus_ops bus_ops_pci = {
.get_pm_support = iwl_pci_is_pm_supported,
- .apm_config = iwl_pci_apm_config,
.get_hw_id_string = iwl_pci_get_hw_id_string,
.get_hw_id = iwl_pci_get_hw_id,
};
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index 1030a25..c9fe888 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -633,6 +633,51 @@
~APMG_PS_CTRL_MSK_PWR_SRC);
}
+/* PCI registers */
+#define PCI_CFG_RETRY_TIMEOUT 0x041
+#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01
+#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02
+
+static u16 iwl_pciexp_link_ctrl(struct iwl_trans *trans)
+{
+ int pos;
+ u16 pci_lnk_ctl;
+ struct iwl_trans_pcie *trans_pcie =
+ IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ struct pci_dev *pci_dev = trans_pcie->pci_dev;
+
+ pos = pci_pcie_cap(pci_dev);
+ pci_read_config_word(pci_dev, pos + PCI_EXP_LNKCTL, &pci_lnk_ctl);
+ return pci_lnk_ctl;
+}
+
+static void iwl_apm_config(struct iwl_trans *trans)
+{
+ /*
+ * HW bug W/A for instability in PCIe bus L0S->L1 transition.
+ * Check if BIOS (or OS) enabled L1-ASPM on this device.
+ * If so (likely), disable L0S, so device moves directly L0->L1;
+ * costs negligible amount of power savings.
+ * If not (unlikely), enable L0S, so there is at least some
+ * power savings, even without L1.
+ */
+ u16 lctl = iwl_pciexp_link_ctrl(trans);
+
+ if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
+ PCI_CFG_LINK_CTRL_VAL_L1_EN) {
+ /* L1-ASPM enabled; disable(!) L0S */
+ iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
+ dev_printk(KERN_INFO, trans->dev,
+ "L1 Enabled; Disabling L0S\n");
+ } else {
+ /* L1-ASPM disabled; enable(!) L0S */
+ iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
+ dev_printk(KERN_INFO, trans->dev,
+ "L1 Disabled; Enabling L0S\n");
+ }
+}
+
/*
* Start up NIC's basic functionality after it has been reset
* (e.g. after platform boot, or shutdown via iwl_apm_stop())
@@ -669,7 +714,7 @@
iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
- bus_apm_config(bus(trans));
+ iwl_apm_config(trans);
/* Configure analog phase-lock-loop before activating to D0A */
if (cfg(trans)->base_params->pll_cfg_val)
@@ -2187,9 +2232,6 @@
.read32 = iwl_trans_pcie_read32,
};
-/* PCI registers */
-#define PCI_CFG_RETRY_TIMEOUT 0x041
-
struct iwl_trans *iwl_trans_pcie_alloc(struct iwl_shared *shrd,
struct pci_dev *pdev,
const struct pci_device_id *ent)