ASoC: Intel: Add Baytrail suspend/resume support
Add suspend and resume support to Baytrail SST DSP. This is implemented by
unloading firmware modules and putting DSP into reset prior suspend and
restarting DSP again in normal boot state after resume.
Context restore for running streams is implemented by scheduling a work from
sst_byt_pcm_trigger() that will allocate a stream with existing parameters
and start it from last known buffer position before suspend.
[Jarkko: Squashed together 5 WIP patches from Liam and 1 from me]
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/sound/soc/intel/sst-baytrail-pcm.c b/sound/soc/intel/sst-baytrail-pcm.c
index e2c2540..00a2118 100644
--- a/sound/soc/intel/sst-baytrail-pcm.c
+++ b/sound/soc/intel/sst-baytrail-pcm.c
@@ -48,6 +48,8 @@
/* latest DSP DMA hw pointer */
u32 hw_ptr;
+
+ struct work_struct work;
};
/* private data for the driver */
@@ -133,6 +135,38 @@
return 0;
}
+static int sst_byt_pcm_restore_stream_context(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct sst_byt_priv_data *pdata =
+ snd_soc_platform_get_drvdata(rtd->platform);
+ struct sst_byt_pcm_data *pcm_data = snd_soc_pcm_get_drvdata(rtd);
+ struct sst_byt *byt = pdata->byt;
+ int ret;
+
+ /* commit stream using existing stream params */
+ ret = sst_byt_stream_commit(byt, pcm_data->stream);
+ if (ret < 0) {
+ dev_err(rtd->dev, "PCM: failed stream commit %d\n", ret);
+ return ret;
+ }
+
+ sst_byt_stream_start(byt, pcm_data->stream, pcm_data->hw_ptr);
+
+ dev_dbg(rtd->dev, "stream context restored at offset %d\n",
+ pcm_data->hw_ptr);
+
+ return 0;
+}
+
+static void sst_byt_pcm_work(struct work_struct *work)
+{
+ struct sst_byt_pcm_data *pcm_data =
+ container_of(work, struct sst_byt_pcm_data, work);
+
+ sst_byt_pcm_restore_stream_context(pcm_data->substream);
+}
+
static int sst_byt_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
@@ -148,6 +182,8 @@
sst_byt_stream_start(byt, pcm_data->stream, 0);
break;
case SNDRV_PCM_TRIGGER_RESUME:
+ schedule_work(&pcm_data->work);
+ break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
sst_byt_stream_resume(byt, pcm_data->stream);
break;
@@ -344,8 +380,10 @@
priv_data->byt = plat_data->dsp;
snd_soc_platform_set_drvdata(platform, priv_data);
- for (i = 0; i < ARRAY_SIZE(byt_dais); i++)
+ for (i = 0; i < ARRAY_SIZE(byt_dais); i++) {
mutex_init(&priv_data->pcm[i].mutex);
+ INIT_WORK(&priv_data->pcm[i].work, sst_byt_pcm_work);
+ }
return 0;
}
@@ -367,6 +405,72 @@
.name = "byt-dai",
};
+#ifdef CONFIG_PM
+static int sst_byt_pcm_dev_suspend_noirq(struct device *dev)
+{
+ struct sst_pdata *sst_pdata = dev_get_platdata(dev);
+ int ret;
+
+ dev_dbg(dev, "suspending noirq\n");
+
+ /* at this point all streams will be stopped and context saved */
+ ret = sst_byt_dsp_suspend_noirq(dev, sst_pdata);
+ if (ret < 0) {
+ dev_err(dev, "failed to suspend %d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int sst_byt_pcm_dev_suspend_late(struct device *dev)
+{
+ struct sst_pdata *sst_pdata = dev_get_platdata(dev);
+ int ret;
+
+ dev_dbg(dev, "suspending late\n");
+
+ ret = sst_byt_dsp_suspend_late(dev, sst_pdata);
+ if (ret < 0) {
+ dev_err(dev, "failed to suspend %d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int sst_byt_pcm_dev_resume_early(struct device *dev)
+{
+ struct sst_pdata *sst_pdata = dev_get_platdata(dev);
+
+ dev_dbg(dev, "resume early\n");
+
+ /* load fw and boot DSP */
+ return sst_byt_dsp_boot(dev, sst_pdata);
+}
+
+static int sst_byt_pcm_dev_resume(struct device *dev)
+{
+ struct sst_pdata *sst_pdata = dev_get_platdata(dev);
+
+ dev_dbg(dev, "resume\n");
+
+ /* wait for FW to finish booting */
+ return sst_byt_dsp_wait_for_ready(dev, sst_pdata);
+}
+
+static const struct dev_pm_ops sst_byt_pm_ops = {
+ .suspend_noirq = sst_byt_pcm_dev_suspend_noirq,
+ .suspend_late = sst_byt_pcm_dev_suspend_late,
+ .resume_early = sst_byt_pcm_dev_resume_early,
+ .resume = sst_byt_pcm_dev_resume,
+};
+
+#define SST_BYT_PM_OPS (&sst_byt_pm_ops)
+#else
+#define SST_BYT_PM_OPS NULL
+#endif
+
static int sst_byt_pcm_dev_probe(struct platform_device *pdev)
{
struct sst_pdata *sst_pdata = dev_get_platdata(&pdev->dev);
@@ -409,6 +513,7 @@
.driver = {
.name = "baytrail-pcm-audio",
.owner = THIS_MODULE,
+ .pm = SST_BYT_PM_OPS,
},
.probe = sst_byt_pcm_dev_probe,