blob: 05eae63f85baf173efe6473caccf12f8fde75139 [file] [log] [blame]
/**
* \file drm_irq.c
* IRQ support
*
* \author Rickard E. (Rik) Faith <faith@valinux.com>
* \author Gareth Hughes <gareth@valinux.com>
*/
/*
* Created: Fri Mar 19 14:30:16 1999 by faith@valinux.com
*
* Copyright 1999, 2000 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "drmP.h"
#include <linux/interrupt.h> /* For task queue support */
/**
* Get interrupt from bus id.
*
* \param inode device inode.
* \param file_priv DRM file private.
* \param cmd command.
* \param arg user argument, pointing to a drm_irq_busid structure.
* \return zero on success or a negative number on failure.
*
* Finds the PCI device with the specified bus id and gets its IRQ number.
* This IOCTL is deprecated, and will now return EINVAL for any busid not equal
* to that of the device that this DRM instance attached to.
*/
int drm_irq_by_busid(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_irq_busid *p = data;
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
return -EINVAL;
if ((p->busnum >> 8) != drm_get_pci_domain(dev) ||
(p->busnum & 0xff) != dev->pdev->bus->number ||
p->devnum != PCI_SLOT(dev->pdev->devfn) || p->funcnum != PCI_FUNC(dev->pdev->devfn))
return -EINVAL;
p->irq = dev->irq;
DRM_DEBUG("%d:%d:%d => IRQ %d\n", p->busnum, p->devnum, p->funcnum,
p->irq);
return 0;
}
/**
* Install IRQ handler.
*
* \param dev DRM device.
* \param irq IRQ number.
*
* Initializes the IRQ related data, and setups drm_device::vbl_queue. Installs the handler, calling the driver
* \c drm_driver_irq_preinstall() and \c drm_driver_irq_postinstall() functions
* before and after the installation.
*/
static int drm_irq_install(struct drm_device * dev)
{
int ret;
unsigned long sh_flags = 0;
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
return -EINVAL;
if (dev->irq == 0)
return -EINVAL;
mutex_lock(&dev->struct_mutex);
/* Driver must have been initialized */
if (!dev->dev_private) {
mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
if (dev->irq_enabled) {
mutex_unlock(&dev->struct_mutex);
return -EBUSY;
}
dev->irq_enabled = 1;
mutex_unlock(&dev->struct_mutex);
DRM_DEBUG("%s: irq=%d\n", __FUNCTION__, dev->irq);
if (drm_core_check_feature(dev, DRIVER_IRQ_VBL)) {
init_waitqueue_head(&dev->vbl_queue);
spin_lock_init(&dev->vbl_lock);
INIT_LIST_HEAD(&dev->vbl_sigs);
INIT_LIST_HEAD(&dev->vbl_sigs2);
dev->vbl_pending = 0;
}
/* Before installing handler */
dev->driver->irq_preinstall(dev);
/* Install handler */
if (drm_core_check_feature(dev, DRIVER_IRQ_SHARED))
sh_flags = IRQF_SHARED;
ret = request_irq(dev->irq, dev->driver->irq_handler,
sh_flags, dev->devname, dev);
if (ret < 0) {
mutex_lock(&dev->struct_mutex);
dev->irq_enabled = 0;
mutex_unlock(&dev->struct_mutex);
return ret;
}
/* After installing handler */
dev->driver->irq_postinstall(dev);
return 0;
}
/**
* Uninstall the IRQ handler.
*
* \param dev DRM device.
*
* Calls the driver's \c drm_driver_irq_uninstall() function, and stops the irq.
*/
int drm_irq_uninstall(struct drm_device * dev)
{
int irq_enabled;
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
return -EINVAL;
mutex_lock(&dev->struct_mutex);
irq_enabled = dev->irq_enabled;
dev->irq_enabled = 0;
mutex_unlock(&dev->struct_mutex);
if (!irq_enabled)
return -EINVAL;
DRM_DEBUG("%s: irq=%d\n", __FUNCTION__, dev->irq);
dev->driver->irq_uninstall(dev);
free_irq(dev->irq, dev);
dev->locked_tasklet_func = NULL;
return 0;
}
EXPORT_SYMBOL(drm_irq_uninstall);
/**
* IRQ control ioctl.
*
* \param inode device inode.
* \param file_priv DRM file private.
* \param cmd command.
* \param arg user argument, pointing to a drm_control structure.
* \return zero on success or a negative number on failure.
*
* Calls irq_install() or irq_uninstall() according to \p arg.
*/
int drm_control(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_control *ctl = data;
/* if we haven't irq we fallback for compatibility reasons - this used to be a separate function in drm_dma.h */
switch (ctl->func) {
case DRM_INST_HANDLER:
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
return 0;
if (dev->if_version < DRM_IF_VERSION(1, 2) &&
ctl->irq != dev->irq)
return -EINVAL;
return drm_irq_install(dev);
case DRM_UNINST_HANDLER:
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
return 0;
return drm_irq_uninstall(dev);
default:
return -EINVAL;
}
}
/**
* Wait for VBLANK.
*
* \param inode device inode.
* \param file_priv DRM file private.
* \param cmd command.
* \param data user argument, pointing to a drm_wait_vblank structure.
* \return zero on success or a negative number on failure.
*
* Verifies the IRQ is installed.
*
* If a signal is requested checks if this task has already scheduled the same signal
* for the same vblank sequence number - nothing to be done in
* that case. If the number of tasks waiting for the interrupt exceeds 100 the
* function fails. Otherwise adds a new entry to drm_device::vbl_sigs for this
* task.
*
* If a signal is not requested, then calls vblank_wait().
*/
int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
union drm_wait_vblank *vblwait = data;
struct timeval now;
int ret = 0;
unsigned int flags, seq;
if ((!dev->irq) || (!dev->irq_enabled))
return -EINVAL;
if (vblwait->request.type &
~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK)) {
DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n",
vblwait->request.type,
(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK));
return -EINVAL;
}
flags = vblwait->request.type & _DRM_VBLANK_FLAGS_MASK;
if (!drm_core_check_feature(dev, (flags & _DRM_VBLANK_SECONDARY) ?
DRIVER_IRQ_VBL2 : DRIVER_IRQ_VBL))
return -EINVAL;
seq = atomic_read((flags & _DRM_VBLANK_SECONDARY) ? &dev->vbl_received2
: &dev->vbl_received);
switch (vblwait->request.type & _DRM_VBLANK_TYPES_MASK) {
case _DRM_VBLANK_RELATIVE:
vblwait->request.sequence += seq;
vblwait->request.type &= ~_DRM_VBLANK_RELATIVE;
case _DRM_VBLANK_ABSOLUTE:
break;
default:
return -EINVAL;
}
if ((flags & _DRM_VBLANK_NEXTONMISS) &&
(seq - vblwait->request.sequence) <= (1<<23)) {
vblwait->request.sequence = seq + 1;
}
if (flags & _DRM_VBLANK_SIGNAL) {
unsigned long irqflags;
struct list_head *vbl_sigs = (flags & _DRM_VBLANK_SECONDARY)
? &dev->vbl_sigs2 : &dev->vbl_sigs;
struct drm_vbl_sig *vbl_sig;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
/* Check if this task has already scheduled the same signal
* for the same vblank sequence number; nothing to be done in
* that case
*/
list_for_each_entry(vbl_sig, vbl_sigs, head) {
if (vbl_sig->sequence == vblwait->request.sequence
&& vbl_sig->info.si_signo ==
vblwait->request.signal
&& vbl_sig->task == current) {
spin_unlock_irqrestore(&dev->vbl_lock,
irqflags);
vblwait->reply.sequence = seq;
goto done;
}
}
if (dev->vbl_pending >= 100) {
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
return -EBUSY;
}
dev->vbl_pending++;
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
if (!
(vbl_sig =
drm_alloc(sizeof(struct drm_vbl_sig), DRM_MEM_DRIVER))) {
return -ENOMEM;
}
memset((void *)vbl_sig, 0, sizeof(*vbl_sig));
vbl_sig->sequence = vblwait->request.sequence;
vbl_sig->info.si_signo = vblwait->request.signal;
vbl_sig->task = current;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
list_add_tail(&vbl_sig->head, vbl_sigs);
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
vblwait->reply.sequence = seq;
} else {
if (flags & _DRM_VBLANK_SECONDARY) {
if (dev->driver->vblank_wait2)
ret = dev->driver->vblank_wait2(dev, &vblwait->request.sequence);
} else if (dev->driver->vblank_wait)
ret =
dev->driver->vblank_wait(dev,
&vblwait->request.sequence);
do_gettimeofday(&now);
vblwait->reply.tval_sec = now.tv_sec;
vblwait->reply.tval_usec = now.tv_usec;
}
done:
return ret;
}
/**
* Send the VBLANK signals.
*
* \param dev DRM device.
*
* Sends a signal for each task in drm_device::vbl_sigs and empties the list.
*
* If a signal is not requested, then calls vblank_wait().
*/
void drm_vbl_send_signals(struct drm_device * dev)
{
unsigned long flags;
int i;
spin_lock_irqsave(&dev->vbl_lock, flags);
for (i = 0; i < 2; i++) {
struct drm_vbl_sig *vbl_sig, *tmp;
struct list_head *vbl_sigs = i ? &dev->vbl_sigs2 : &dev->vbl_sigs;
unsigned int vbl_seq = atomic_read(i ? &dev->vbl_received2 :
&dev->vbl_received);
list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) {
if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
vbl_sig->info.si_code = vbl_seq;
send_sig_info(vbl_sig->info.si_signo,
&vbl_sig->info, vbl_sig->task);
list_del(&vbl_sig->head);
drm_free(vbl_sig, sizeof(*vbl_sig),
DRM_MEM_DRIVER);
dev->vbl_pending--;
}
}
}
spin_unlock_irqrestore(&dev->vbl_lock, flags);
}
EXPORT_SYMBOL(drm_vbl_send_signals);
/**
* Tasklet wrapper function.
*
* \param data DRM device in disguise.
*
* Attempts to grab the HW lock and calls the driver callback on success. On
* failure, leave the lock marked as contended so the callback can be called
* from drm_unlock().
*/
static void drm_locked_tasklet_func(unsigned long data)
{
struct drm_device *dev = (struct drm_device *)data;
unsigned long irqflags;
spin_lock_irqsave(&dev->tasklet_lock, irqflags);
if (!dev->locked_tasklet_func ||
!drm_lock_take(&dev->lock,
DRM_KERNEL_CONTEXT)) {
spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
return;
}
dev->lock.lock_time = jiffies;
atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
dev->locked_tasklet_func(dev);
drm_lock_free(&dev->lock,
DRM_KERNEL_CONTEXT);
dev->locked_tasklet_func = NULL;
spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
}
/**
* Schedule a tasklet to call back a driver hook with the HW lock held.
*
* \param dev DRM device.
* \param func Driver callback.
*
* This is intended for triggering actions that require the HW lock from an
* interrupt handler. The lock will be grabbed ASAP after the interrupt handler
* completes. Note that the callback may be called from interrupt or process
* context, it must not make any assumptions about this. Also, the HW lock will
* be held with the kernel context or any client context.
*/
void drm_locked_tasklet(struct drm_device *dev, void (*func)(struct drm_device *))
{
unsigned long irqflags;
static DECLARE_TASKLET(drm_tasklet, drm_locked_tasklet_func, 0);
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ) ||
test_bit(TASKLET_STATE_SCHED, &drm_tasklet.state))
return;
spin_lock_irqsave(&dev->tasklet_lock, irqflags);
if (dev->locked_tasklet_func) {
spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
return;
}
dev->locked_tasklet_func = func;
spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
drm_tasklet.data = (unsigned long)dev;
tasklet_hi_schedule(&drm_tasklet);
}
EXPORT_SYMBOL(drm_locked_tasklet);