V4L/DVB (3669): Configurable dma buffer size for saa7146-based budget dvb cards
- Issue a warning when more than 80% of the DMA buffer is being used
(probably due to bad IRQ latency). Warnings are rate-limited.
- Introduce a new parameter 'bufsize' (in KByte) which increases the
default DMA buffer of 188 KByte up to 1410 KByte (Activy: 564 KByte).
Signed-off-by: Ingo Schneider <mail@ingo-schneider.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index 633e68c..ea2066d 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -39,9 +39,21 @@
#include "budget.h"
#include "ttpci-eeprom.h"
+#define TS_WIDTH (2 * TS_SIZE)
+#define TS_WIDTH_ACTIVY TS_SIZE
+#define TS_HEIGHT_MASK 0xf00
+#define TS_HEIGHT_MASK_ACTIVY 0xc00
+#define TS_MIN_BUFSIZE_K 188
+#define TS_MAX_BUFSIZE_K 1410
+#define TS_MAX_BUFSIZE_K_ACTIVY 564
+#define BUFFER_WARNING_WAIT (30*HZ)
+
int budget_debug;
+static int dma_buffer_size = TS_MIN_BUFSIZE_K;
module_param_named(debug, budget_debug, int, 0644);
+module_param_named(bufsize, dma_buffer_size, int, 0444);
MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off).");
+MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)");
/****************************************************************************
* TT budget / WinTV Nova
@@ -70,11 +82,10 @@
saa7146_write(dev, MC1, MASK_20); // DMA3 off
- memset(budget->grabbing, 0x00, TS_HEIGHT * TS_WIDTH);
+ memset(budget->grabbing, 0x00, budget->buffer_size);
saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000));
- budget->tsf = 0xff;
budget->ttbp = 0;
/*
@@ -115,16 +126,12 @@
saa7146_write(dev, BASE_ODD3, 0);
saa7146_write(dev, BASE_EVEN3, 0);
- saa7146_write(dev, PROT_ADDR3, TS_WIDTH * TS_HEIGHT);
+ saa7146_write(dev, PROT_ADDR3, budget->buffer_size);
saa7146_write(dev, BASE_PAGE3, budget->pt.dma | ME1 | 0x90);
- if (budget->card->type == BUDGET_FS_ACTIVY) {
- saa7146_write(dev, PITCH3, TS_WIDTH / 2);
- saa7146_write(dev, NUM_LINE_BYTE3, ((TS_HEIGHT * 2) << 16) | (TS_WIDTH / 2));
- } else {
- saa7146_write(dev, PITCH3, TS_WIDTH);
- saa7146_write(dev, NUM_LINE_BYTE3, (TS_HEIGHT << 16) | TS_WIDTH);
- }
+ saa7146_write(dev, PITCH3, budget->buffer_width);
+ saa7146_write(dev, NUM_LINE_BYTE3,
+ (budget->buffer_height << 16) | budget->buffer_width);
saa7146_write(dev, MC2, (MASK_04 | MASK_20));
@@ -141,11 +148,12 @@
u8 *mem = (u8 *) (budget->grabbing);
u32 olddma = budget->ttbp;
u32 newdma = saa7146_read(budget->dev, PCI_VDP3);
+ u32 count;
/* nearest lower position divisible by 188 */
newdma -= newdma % 188;
- if (newdma >= TS_BUFLEN)
+ if (newdma >= budget->buffer_size)
return;
budget->ttbp = newdma;
@@ -154,11 +162,24 @@
return;
if (newdma > olddma) { /* no wraparound, dump olddma..newdma */
- dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, (newdma - olddma) / 188);
+ count = newdma - olddma;
+ dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188);
} else { /* wraparound, dump olddma..buflen and 0..newdma */
- dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, (TS_BUFLEN - olddma) / 188);
+ count = budget->buffer_size - olddma;
+ dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188);
+ count += newdma;
dvb_dmx_swfilter_packets(&budget->demux, mem, newdma / 188);
}
+
+ if (count > budget->buffer_warning_threshold)
+ budget->buffer_warnings++;
+
+ if (budget->buffer_warnings && time_after(jiffies, budget->buffer_warning_time)) {
+ printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n",
+ budget->dev->name, __FUNCTION__, budget->buffer_warnings, count);
+ budget->buffer_warning_time = jiffies + BUFFER_WARNING_WAIT;
+ budget->buffer_warnings = 0;
+ }
}
@@ -341,9 +362,10 @@
struct saa7146_pci_extension_data *info,
struct module *owner)
{
- int length = TS_WIDTH * TS_HEIGHT;
int ret = 0;
struct budget_info *bi = info->ext_priv;
+ int max_bufsize;
+ int height_mask;
memset(budget, 0, sizeof(struct budget));
@@ -352,6 +374,32 @@
budget->card = bi;
budget->dev = (struct saa7146_dev *) dev;
+ if (budget->card->type == BUDGET_FS_ACTIVY) {
+ budget->buffer_width = TS_WIDTH_ACTIVY;
+ max_bufsize = TS_MAX_BUFSIZE_K_ACTIVY;
+ height_mask = TS_HEIGHT_MASK_ACTIVY;
+ } else {
+ budget->buffer_width = TS_WIDTH;
+ max_bufsize = TS_MAX_BUFSIZE_K;
+ height_mask = TS_HEIGHT_MASK;
+ }
+
+ if (dma_buffer_size < TS_MIN_BUFSIZE_K)
+ dma_buffer_size = TS_MIN_BUFSIZE_K;
+ else if (dma_buffer_size > max_bufsize)
+ dma_buffer_size = max_bufsize;
+
+ budget->buffer_height = dma_buffer_size * 1024 / budget->buffer_width;
+ budget->buffer_height &= height_mask;
+ budget->buffer_size = budget->buffer_height * budget->buffer_width;
+ budget->buffer_warning_threshold = budget->buffer_size * 80/100;
+ budget->buffer_warnings = 0;
+ budget->buffer_warning_time = jiffies;
+
+ dprintk(2, "%s: width = %d, height = %d\n",
+ budget->dev->name, budget->buffer_width, budget->buffer_height);
+ printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size);
+
dvb_register_adapter(&budget->dvb_adapter, budget->card->name, owner);
/* set dd1 stream a & b */
@@ -392,7 +440,7 @@
ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac);
if (NULL ==
- (budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, length, &budget->pt))) {
+ (budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, budget->buffer_size, &budget->pt))) {
ret = -ENOMEM;
goto err;
}
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 9fc9185..1b3aaac 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -577,20 +577,6 @@
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
// Set RPS1 Address register to point to RPS code (r108 p42)
saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
- // Set Source Line Counter Threshold, using BRS (rCC p43)
- // It generates HS event every TS_HEIGHT lines
- // this is related to TS_WIDTH set in register
- // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
- // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
- //,then RPS_THRESH1
- // should be set to trigger every TS_HEIGHT (512) lines.
- //
- saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
-
- // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
- // Enable RPS1 (rFC p33)
- saa7146_write(dev, MC1, (MASK_13 | MASK_29));
-
if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
return -ENOMEM;
@@ -602,6 +588,20 @@
return err;
}
+ // Set Source Line Counter Threshold, using BRS (rCC p43)
+ // It generates HS event every TS_HEIGHT lines
+ // this is related to TS_WIDTH set in register
+ // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
+ // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
+ //,then RPS_THRESH1
+ // should be set to trigger every TS_HEIGHT (512) lines.
+ //
+ saa7146_write(dev, RPS_THRESH1, budget->buffer_height | MASK_12 );
+
+ // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
+ // Enable RPS1 (rFC p33)
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
dev->ext_priv = budget;
diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h
index 4ac0f4d..ecea3a1 100644
--- a/drivers/media/dvb/ttpci/budget.h
+++ b/drivers/media/dvb/ttpci/budget.h
@@ -58,7 +58,13 @@
int ci_present;
int video_port;
- u8 tsf;
+ u32 buffer_width;
+ u32 buffer_height;
+ u32 buffer_size;
+ u32 buffer_warning_threshold;
+ u32 buffer_warnings;
+ unsigned long buffer_warning_time;
+
u32 ttbp;
int feeding;
@@ -79,11 +85,6 @@
.ext_priv = &x_var ## _info, \
.ext = &budget_extension };
-#define TS_WIDTH (376)
-#define TS_HEIGHT (512)
-#define TS_BUFLEN (TS_WIDTH*TS_HEIGHT)
-#define TS_MAX_PACKETS (TS_BUFLEN/TS_SIZE)
-
#define BUDGET_TT 0
#define BUDGET_TT_HW_DISEQC 1
#define BUDGET_PATCH 3