i40e: implement DCB support infastructure
Intel XL710 series of adapters support QoS as per the
IEEE 802.1 DCB (Data Center Bridging) standard.
This is supported in conjuction with:
- Enhanced Transmission Selection (ETS) - IEEE 802.1Qaz
- Priority Flow Control (PFC) - IEEE 802.1Qbb
- DCB eXchange Protocol (DCBX) - IEEE 802.1Qaz
On Intel XL710 adapters DCBX is performed by the adapter
firmware. The firmware runs DCBX in willing mode and configures
the port as per the DCB settings recommended by it's link
partner.
By default in absence of any DCBX; firmware would configure the
port with a single traffic class and all of the port bandwith
will be allocated to that traffic class.
This patch adds functions and calls to support querying and
configuring DCB using firmware APIs.
Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-By: Jack Morgan<jack.morgan@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index 8c426f4..ed91f93 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -167,6 +167,8 @@
i40e_status i40e_aq_mac_address_write(struct i40e_hw *hw,
u16 flags, u8 *mac_addr,
struct i40e_asq_cmd_details *cmd_details);
+i40e_status i40e_aq_dcb_updated(struct i40e_hw *hw,
+ struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_aq_set_hmc_resource_profile(struct i40e_hw *hw,
enum i40e_aq_hmc_profile profile,
u8 pe_vf_enabled_count,
@@ -177,6 +179,15 @@
i40e_status i40e_aq_config_vsi_tc_bw(struct i40e_hw *hw, u16 seid,
struct i40e_aqc_configure_vsi_tc_bw_data *bw_data,
struct i40e_asq_cmd_details *cmd_details);
+i40e_status i40e_aq_config_switch_comp_ets(struct i40e_hw *hw,
+ u16 seid,
+ struct i40e_aqc_configure_switching_comp_ets_data *ets_data,
+ enum i40e_admin_queue_opc opcode,
+ struct i40e_asq_cmd_details *cmd_details);
+i40e_status i40e_aq_config_switch_comp_bw_config(struct i40e_hw *hw,
+ u16 seid,
+ struct i40e_aqc_configure_switching_comp_bw_config_data *bw_data,
+ struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_aq_query_vsi_bw_config(struct i40e_hw *hw,
u16 seid,
struct i40e_aqc_query_vsi_bw_config_resp *bw_data,
@@ -204,8 +215,7 @@
bool i40e_get_link_status(struct i40e_hw *hw);
i40e_status i40e_get_mac_addr(struct i40e_hw *hw,
u8 *mac_addr);
-i40e_status i40e_read_lldp_cfg(struct i40e_hw *hw,
- struct i40e_lldp_variables *lldp_cfg);
+i40e_status i40e_validate_mac_addr(u8 *mac_addr);
/* prototype for functions used for NVM access */
i40e_status i40e_init_nvm(struct i40e_hw *hw);
i40e_status i40e_acquire_nvm(struct i40e_hw *hw,
@@ -234,4 +244,9 @@
struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_set_filter_control(struct i40e_hw *hw,
struct i40e_filter_control_settings *settings);
+i40e_status i40e_aq_add_rem_control_packet_filter(struct i40e_hw *hw,
+ u8 *mac_addr, u16 ethtype, u16 flags,
+ u16 vsi_seid, u16 queue, bool is_add,
+ struct i40e_control_filter_stats *stats,
+ struct i40e_asq_cmd_details *cmd_details);
#endif /* _I40E_PROTOTYPE_H_ */