[PATCH] V4L/DVB: (3086c) Whitespaces cleanups part 3
Clean up whitespaces at v4l/dvb files
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 206cc2f..2899d34 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -174,8 +174,8 @@
int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
{
- u32 *cpu;
- dma_addr_t dma_addr;
+ u32 *cpu;
+ dma_addr_t dma_addr;
cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr);
if (NULL == cpu) {
@@ -405,7 +405,7 @@
pci_set_drvdata(pci, dev);
- init_MUTEX(&dev->lock);
+ init_MUTEX(&dev->lock);
spin_lock_init(&dev->int_slock);
spin_lock_init(&dev->slock);
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index 3788898..09ec964 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -1,6 +1,6 @@
#include <media/saa7146_vv.h>
-#define BOARD_CAN_DO_VBI(dev) (dev->revision != 0 && dev->vv_data->vbi_minor != -1)
+#define BOARD_CAN_DO_VBI(dev) (dev->revision != 0 && dev->vv_data->vbi_minor != -1)
/****************************************************************************/
/* resource management functions, shamelessly stolen from saa7134 driver */
@@ -102,9 +102,9 @@
/* finish current buffer */
if (NULL == q->curr) {
DEB_D(("aiii. no current buffer\n"));
- return;
+ return;
}
-
+
q->curr->vb.state = state;
do_gettimeofday(&q->curr->vb.ts);
wake_up(&q->curr->vb.done);
@@ -143,13 +143,13 @@
// fixme: fix this for vflip != 0
saa7146_write(dev, PROT_ADDR1, 0);
- saa7146_write(dev, MC2, (MASK_02|MASK_18));
+ saa7146_write(dev, MC2, (MASK_02|MASK_18));
/* write the address of the rps-program */
saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
/* turn on rps */
saa7146_write(dev, MC1, (MASK_12 | MASK_28));
-
+
/*
printk("vdma%d.base_even: 0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
printk("vdma%d.base_odd: 0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
@@ -246,7 +246,7 @@
goto out;
}
memset(fh,0,sizeof(*fh));
-
+
file->private_data = fh;
fh->dev = dev;
fh->type = type;
@@ -275,7 +275,7 @@
file->private_data = NULL;
}
up(&saa7146_devices_lock);
- return result;
+ return result;
}
static int fops_release(struct inode *inode, struct file *file)
@@ -405,7 +405,7 @@
static void vv_callback(struct saa7146_dev *dev, unsigned long status)
{
u32 isr = status;
-
+
DEB_INT(("dev:%p, isr:0x%08x\n",dev,(u32)status));
if (0 != (isr & (MASK_27))) {
@@ -454,11 +454,11 @@
handle different devices that might need different
configuration data) */
dev->ext_vv_data = ext_vv;
-
+
vv->video_minor = -1;
vv->vbi_minor = -1;
- vv->d_clipping.cpu_addr = pci_alloc_consistent(dev->pci, SAA7146_CLIPPING_MEM, &vv->d_clipping.dma_handle);
+ vv->d_clipping.cpu_addr = pci_alloc_consistent(dev->pci, SAA7146_CLIPPING_MEM, &vv->d_clipping.dma_handle);
if( NULL == vv->d_clipping.cpu_addr ) {
ERR(("out of memory. aborting.\n"));
kfree(vv);
@@ -468,7 +468,7 @@
saa7146_video_uops.init(dev,vv);
saa7146_vbi_uops.init(dev,vv);
-
+
dev->vv_data = vv;
dev->vv_callback = &vv_callback;
@@ -480,12 +480,12 @@
struct saa7146_vv *vv = dev->vv_data;
DEB_EE(("dev:%p\n",dev));
-
+
pci_free_consistent(dev->pci, SAA7146_RPS_MEM, vv->d_clipping.cpu_addr, vv->d_clipping.dma_handle);
- kfree(vv);
+ kfree(vv);
dev->vv_data = NULL;
dev->vv_callback = NULL;
-
+
return 0;
}
@@ -498,7 +498,7 @@
DEB_EE(("dev:%p, name:'%s', type:%d\n",dev,name,type));
// released by vfd->release
- vfd = video_device_alloc();
+ vfd = video_device_alloc();
if (vfd == NULL)
return -ENOMEM;
@@ -530,7 +530,7 @@
int saa7146_unregister_device(struct video_device **vid, struct saa7146_dev* dev)
{
struct saa7146_vv *vv = dev->vv_data;
-
+
DEB_EE(("dev:%p\n",dev));
if( VFL_TYPE_GRABBER == (*vid)->type ) {
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index fec6bea..8aabdd8fb 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -276,8 +276,8 @@
int i = 0, count = 0;
u32* buffer = dev->d_i2c.cpu_addr;
int err = 0;
- int address_err = 0;
- int short_delay = 0;
+ int address_err = 0;
+ int short_delay = 0;
if (down_interruptible (&dev->i2c_lock))
return -ERESTARTSYS;
@@ -325,7 +325,7 @@
if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) {
goto out;
}
- address_err++;
+ address_err++;
}
DEB_I2C(("error while sending message(s). starting again.\n"));
break;
@@ -336,14 +336,14 @@
break;
}
- /* delay a bit before retrying */
- msleep(10);
+ /* delay a bit before retrying */
+ msleep(10);
} while (err != num && retries--);
- /* if every retry had an address error, exit right away */
- if (address_err == retries) {
- goto out;
+ /* if every retry had an address error, exit right away */
+ if (address_err == retries) {
+ goto out;
}
/* if any things had to be read, get the results */
diff --git a/drivers/media/common/saa7146_vbi.c b/drivers/media/common/saa7146_vbi.c
index cb86a97..063986e 100644
--- a/drivers/media/common/saa7146_vbi.c
+++ b/drivers/media/common/saa7146_vbi.c
@@ -6,8 +6,8 @@
{
struct saa7146_vv *vv = dev->vv_data;
- u32 *cpu;
- dma_addr_t dma_addr;
+ u32 *cpu;
+ dma_addr_t dma_addr;
int count = 0;
int i;
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 8dd4d15..1d96102 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -150,23 +150,23 @@
maxh = vv->standard->v_max_out;
if (V4L2_FIELD_ANY == field) {
- field = (win->w.height > maxh/2)
- ? V4L2_FIELD_INTERLACED
- : V4L2_FIELD_TOP;
- }
- switch (field) {
- case V4L2_FIELD_TOP:
- case V4L2_FIELD_BOTTOM:
- case V4L2_FIELD_ALTERNATE:
- maxh = maxh / 2;
- break;
- case V4L2_FIELD_INTERLACED:
- break;
- default: {
+ field = (win->w.height > maxh/2)
+ ? V4L2_FIELD_INTERLACED
+ : V4L2_FIELD_TOP;
+ }
+ switch (field) {
+ case V4L2_FIELD_TOP:
+ case V4L2_FIELD_BOTTOM:
+ case V4L2_FIELD_ALTERNATE:
+ maxh = maxh / 2;
+ break;
+ case V4L2_FIELD_INTERLACED:
+ break;
+ default: {
DEB_D(("no known field mode '%d'.\n",field));
- return -EINVAL;
+ return -EINVAL;
}
- }
+ }
win->field = field;
if (win->w.width > maxw)
@@ -887,7 +887,7 @@
DEB_EE(("VIDIOC_QUERYCAP\n"));
- strcpy(cap->driver, "saa7146 v4l2");
+ strcpy(cap->driver, "saa7146 v4l2");
strlcpy(cap->card, dev->ext->name, sizeof(cap->card));
sprintf(cap->bus_info,"PCI:%s", pci_name(dev->pci));
cap->version = SAA7146_VERSION_CODE;
@@ -1011,19 +1011,19 @@
err = set_control(fh,arg);
return err;
}
- case VIDIOC_G_PARM:
- {
- struct v4l2_streamparm *parm = arg;
+ case VIDIOC_G_PARM:
+ {
+ struct v4l2_streamparm *parm = arg;
if( parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ) {
return -EINVAL;
}
- memset(&parm->parm.capture,0,sizeof(struct v4l2_captureparm));
+ memset(&parm->parm.capture,0,sizeof(struct v4l2_captureparm));
parm->parm.capture.readbuffers = 1;
// fixme: only for PAL!
parm->parm.capture.timeperframe.numerator = 1;
parm->parm.capture.timeperframe.denominator = 25;
- return 0;
- }
+ return 0;
+ }
case VIDIOC_G_FMT:
{
struct v4l2_format *f = arg;
@@ -1383,7 +1383,7 @@
static void video_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
{
- INIT_LIST_HEAD(&vv->video_q.queue);
+ INIT_LIST_HEAD(&vv->video_q.queue);
init_timer(&vv->video_q.timeout);
vv->video_q.timeout.function = saa7146_buffer_timeout;