| /* |
| * ipmi_smic_sm.c |
| * |
| * The state-machine driver for an IPMI SMIC driver |
| * |
| * It started as a copy of Corey Minyard's driver for the KSC interface |
| * and the kernel patch "mmcdev-patch-245" by HP |
| * |
| * modified by: Hannes Schulz <schulz@schwaar.com> |
| * ipmi@schwaar.com |
| * |
| * |
| * Corey Minyard's driver for the KSC interface has the following |
| * copyright notice: |
| * Copyright 2002 MontaVista Software Inc. |
| * |
| * the kernel patch "mmcdev-patch-245" by HP has the following |
| * copyright notice: |
| * (c) Copyright 2001 Grant Grundler (c) Copyright |
| * 2001 Hewlett-Packard Company |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. */ |
| |
| #include <linux/kernel.h> /* For printk. */ |
| #include <linux/string.h> |
| #include <linux/ipmi_msgdefs.h> /* for completion codes */ |
| #include "ipmi_si_sm.h" |
| |
| #define IPMI_SMIC_VERSION "v33" |
| |
| /* smic_debug is a bit-field |
| * SMIC_DEBUG_ENABLE - turned on for now |
| * SMIC_DEBUG_MSG - commands and their responses |
| * SMIC_DEBUG_STATES - state machine |
| */ |
| #define SMIC_DEBUG_STATES 4 |
| #define SMIC_DEBUG_MSG 2 |
| #define SMIC_DEBUG_ENABLE 1 |
| |
| static int smic_debug = 1; |
| |
| enum smic_states { |
| SMIC_IDLE, |
| SMIC_START_OP, |
| SMIC_OP_OK, |
| SMIC_WRITE_START, |
| SMIC_WRITE_NEXT, |
| SMIC_WRITE_END, |
| SMIC_WRITE2READ, |
| SMIC_READ_START, |
| SMIC_READ_NEXT, |
| SMIC_READ_END, |
| SMIC_HOSED |
| }; |
| |
| #define MAX_SMIC_READ_SIZE 80 |
| #define MAX_SMIC_WRITE_SIZE 80 |
| #define SMIC_MAX_ERROR_RETRIES 3 |
| |
| /* Timeouts in microseconds. */ |
| #define SMIC_RETRY_TIMEOUT 100000 |
| |
| /* SMIC Flags Register Bits */ |
| #define SMIC_RX_DATA_READY 0x80 |
| #define SMIC_TX_DATA_READY 0x40 |
| #define SMIC_SMI 0x10 |
| #define SMIC_EVM_DATA_AVAIL 0x08 |
| #define SMIC_SMS_DATA_AVAIL 0x04 |
| #define SMIC_FLAG_BSY 0x01 |
| |
| /* SMIC Error Codes */ |
| #define EC_NO_ERROR 0x00 |
| #define EC_ABORTED 0x01 |
| #define EC_ILLEGAL_CONTROL 0x02 |
| #define EC_NO_RESPONSE 0x03 |
| #define EC_ILLEGAL_COMMAND 0x04 |
| #define EC_BUFFER_FULL 0x05 |
| |
| struct si_sm_data |
| { |
| enum smic_states state; |
| struct si_sm_io *io; |
| unsigned char write_data[MAX_SMIC_WRITE_SIZE]; |
| int write_pos; |
| int write_count; |
| int orig_write_count; |
| unsigned char read_data[MAX_SMIC_READ_SIZE]; |
| int read_pos; |
| int truncated; |
| unsigned int error_retries; |
| long smic_timeout; |
| }; |
| |
| static unsigned int init_smic_data (struct si_sm_data *smic, |
| struct si_sm_io *io) |
| { |
| smic->state = SMIC_IDLE; |
| smic->io = io; |
| smic->write_pos = 0; |
| smic->write_count = 0; |
| smic->orig_write_count = 0; |
| smic->read_pos = 0; |
| smic->error_retries = 0; |
| smic->truncated = 0; |
| smic->smic_timeout = SMIC_RETRY_TIMEOUT; |
| |
| /* We use 3 bytes of I/O. */ |
| return 3; |
| } |
| |
| static int start_smic_transaction(struct si_sm_data *smic, |
| unsigned char *data, unsigned int size) |
| { |
| unsigned int i; |
| |
| if ((size < 2) || (size > MAX_SMIC_WRITE_SIZE)) { |
| return -1; |
| } |
| if ((smic->state != SMIC_IDLE) && (smic->state != SMIC_HOSED)) { |
| return -2; |
| } |
| if (smic_debug & SMIC_DEBUG_MSG) { |
| printk(KERN_INFO "start_smic_transaction -"); |
| for (i = 0; i < size; i ++) { |
| printk (" %02x", (unsigned char) (data [i])); |
| } |
| printk ("\n"); |
| } |
| smic->error_retries = 0; |
| memcpy(smic->write_data, data, size); |
| smic->write_count = size; |
| smic->orig_write_count = size; |
| smic->write_pos = 0; |
| smic->read_pos = 0; |
| smic->state = SMIC_START_OP; |
| smic->smic_timeout = SMIC_RETRY_TIMEOUT; |
| return 0; |
| } |
| |
| static int smic_get_result(struct si_sm_data *smic, |
| unsigned char *data, unsigned int length) |
| { |
| int i; |
| |
| if (smic_debug & SMIC_DEBUG_MSG) { |
| printk (KERN_INFO "smic_get result -"); |
| for (i = 0; i < smic->read_pos; i ++) { |
| printk (" %02x", (smic->read_data [i])); |
| } |
| printk ("\n"); |
| } |
| if (length < smic->read_pos) { |
| smic->read_pos = length; |
| smic->truncated = 1; |
| } |
| memcpy(data, smic->read_data, smic->read_pos); |
| |
| if ((length >= 3) && (smic->read_pos < 3)) { |
| data[2] = IPMI_ERR_UNSPECIFIED; |
| smic->read_pos = 3; |
| } |
| if (smic->truncated) { |
| data[2] = IPMI_ERR_MSG_TRUNCATED; |
| smic->truncated = 0; |
| } |
| return smic->read_pos; |
| } |
| |
| static inline unsigned char read_smic_flags(struct si_sm_data *smic) |
| { |
| return smic->io->inputb(smic->io, 2); |
| } |
| |
| static inline unsigned char read_smic_status(struct si_sm_data *smic) |
| { |
| return smic->io->inputb(smic->io, 1); |
| } |
| |
| static inline unsigned char read_smic_data(struct si_sm_data *smic) |
| { |
| return smic->io->inputb(smic->io, 0); |
| } |
| |
| static inline void write_smic_flags(struct si_sm_data *smic, |
| unsigned char flags) |
| { |
| smic->io->outputb(smic->io, 2, flags); |
| } |
| |
| static inline void write_smic_control(struct si_sm_data *smic, |
| unsigned char control) |
| { |
| smic->io->outputb(smic->io, 1, control); |
| } |
| |
| static inline void write_si_sm_data (struct si_sm_data *smic, |
| unsigned char data) |
| { |
| smic->io->outputb(smic->io, 0, data); |
| } |
| |
| static inline void start_error_recovery(struct si_sm_data *smic, char *reason) |
| { |
| (smic->error_retries)++; |
| if (smic->error_retries > SMIC_MAX_ERROR_RETRIES) { |
| if (smic_debug & SMIC_DEBUG_ENABLE) { |
| printk(KERN_WARNING |
| "ipmi_smic_drv: smic hosed: %s\n", reason); |
| } |
| smic->state = SMIC_HOSED; |
| } else { |
| smic->write_count = smic->orig_write_count; |
| smic->write_pos = 0; |
| smic->read_pos = 0; |
| smic->state = SMIC_START_OP; |
| smic->smic_timeout = SMIC_RETRY_TIMEOUT; |
| } |
| } |
| |
| static inline void write_next_byte(struct si_sm_data *smic) |
| { |
| write_si_sm_data(smic, smic->write_data[smic->write_pos]); |
| (smic->write_pos)++; |
| (smic->write_count)--; |
| } |
| |
| static inline void read_next_byte (struct si_sm_data *smic) |
| { |
| if (smic->read_pos >= MAX_SMIC_READ_SIZE) { |
| read_smic_data (smic); |
| smic->truncated = 1; |
| } else { |
| smic->read_data[smic->read_pos] = read_smic_data(smic); |
| (smic->read_pos)++; |
| } |
| } |
| |
| /* SMIC Control/Status Code Components */ |
| #define SMIC_GET_STATUS 0x00 /* Control form's name */ |
| #define SMIC_READY 0x00 /* Status form's name */ |
| #define SMIC_WR_START 0x01 /* Unified Control/Status names... */ |
| #define SMIC_WR_NEXT 0x02 |
| #define SMIC_WR_END 0x03 |
| #define SMIC_RD_START 0x04 |
| #define SMIC_RD_NEXT 0x05 |
| #define SMIC_RD_END 0x06 |
| #define SMIC_CODE_MASK 0x0f |
| |
| #define SMIC_CONTROL 0x00 |
| #define SMIC_STATUS 0x80 |
| #define SMIC_CS_MASK 0x80 |
| |
| #define SMIC_SMS 0x40 |
| #define SMIC_SMM 0x60 |
| #define SMIC_STREAM_MASK 0x60 |
| |
| /* SMIC Control Codes */ |
| #define SMIC_CC_SMS_GET_STATUS (SMIC_CONTROL|SMIC_SMS|SMIC_GET_STATUS) |
| #define SMIC_CC_SMS_WR_START (SMIC_CONTROL|SMIC_SMS|SMIC_WR_START) |
| #define SMIC_CC_SMS_WR_NEXT (SMIC_CONTROL|SMIC_SMS|SMIC_WR_NEXT) |
| #define SMIC_CC_SMS_WR_END (SMIC_CONTROL|SMIC_SMS|SMIC_WR_END) |
| #define SMIC_CC_SMS_RD_START (SMIC_CONTROL|SMIC_SMS|SMIC_RD_START) |
| #define SMIC_CC_SMS_RD_NEXT (SMIC_CONTROL|SMIC_SMS|SMIC_RD_NEXT) |
| #define SMIC_CC_SMS_RD_END (SMIC_CONTROL|SMIC_SMS|SMIC_RD_END) |
| |
| #define SMIC_CC_SMM_GET_STATUS (SMIC_CONTROL|SMIC_SMM|SMIC_GET_STATUS) |
| #define SMIC_CC_SMM_WR_START (SMIC_CONTROL|SMIC_SMM|SMIC_WR_START) |
| #define SMIC_CC_SMM_WR_NEXT (SMIC_CONTROL|SMIC_SMM|SMIC_WR_NEXT) |
| #define SMIC_CC_SMM_WR_END (SMIC_CONTROL|SMIC_SMM|SMIC_WR_END) |
| #define SMIC_CC_SMM_RD_START (SMIC_CONTROL|SMIC_SMM|SMIC_RD_START) |
| #define SMIC_CC_SMM_RD_NEXT (SMIC_CONTROL|SMIC_SMM|SMIC_RD_NEXT) |
| #define SMIC_CC_SMM_RD_END (SMIC_CONTROL|SMIC_SMM|SMIC_RD_END) |
| |
| /* SMIC Status Codes */ |
| #define SMIC_SC_SMS_READY (SMIC_STATUS|SMIC_SMS|SMIC_READY) |
| #define SMIC_SC_SMS_WR_START (SMIC_STATUS|SMIC_SMS|SMIC_WR_START) |
| #define SMIC_SC_SMS_WR_NEXT (SMIC_STATUS|SMIC_SMS|SMIC_WR_NEXT) |
| #define SMIC_SC_SMS_WR_END (SMIC_STATUS|SMIC_SMS|SMIC_WR_END) |
| #define SMIC_SC_SMS_RD_START (SMIC_STATUS|SMIC_SMS|SMIC_RD_START) |
| #define SMIC_SC_SMS_RD_NEXT (SMIC_STATUS|SMIC_SMS|SMIC_RD_NEXT) |
| #define SMIC_SC_SMS_RD_END (SMIC_STATUS|SMIC_SMS|SMIC_RD_END) |
| |
| #define SMIC_SC_SMM_READY (SMIC_STATUS|SMIC_SMM|SMIC_READY) |
| #define SMIC_SC_SMM_WR_START (SMIC_STATUS|SMIC_SMM|SMIC_WR_START) |
| #define SMIC_SC_SMM_WR_NEXT (SMIC_STATUS|SMIC_SMM|SMIC_WR_NEXT) |
| #define SMIC_SC_SMM_WR_END (SMIC_STATUS|SMIC_SMM|SMIC_WR_END) |
| #define SMIC_SC_SMM_RD_START (SMIC_STATUS|SMIC_SMM|SMIC_RD_START) |
| #define SMIC_SC_SMM_RD_NEXT (SMIC_STATUS|SMIC_SMM|SMIC_RD_NEXT) |
| #define SMIC_SC_SMM_RD_END (SMIC_STATUS|SMIC_SMM|SMIC_RD_END) |
| |
| /* these are the control/status codes we actually use |
| SMIC_CC_SMS_GET_STATUS 0x40 |
| SMIC_CC_SMS_WR_START 0x41 |
| SMIC_CC_SMS_WR_NEXT 0x42 |
| SMIC_CC_SMS_WR_END 0x43 |
| SMIC_CC_SMS_RD_START 0x44 |
| SMIC_CC_SMS_RD_NEXT 0x45 |
| SMIC_CC_SMS_RD_END 0x46 |
| |
| SMIC_SC_SMS_READY 0xC0 |
| SMIC_SC_SMS_WR_START 0xC1 |
| SMIC_SC_SMS_WR_NEXT 0xC2 |
| SMIC_SC_SMS_WR_END 0xC3 |
| SMIC_SC_SMS_RD_START 0xC4 |
| SMIC_SC_SMS_RD_NEXT 0xC5 |
| SMIC_SC_SMS_RD_END 0xC6 |
| */ |
| |
| static enum si_sm_result smic_event (struct si_sm_data *smic, long time) |
| { |
| unsigned char status; |
| unsigned char flags; |
| unsigned char data; |
| |
| if (smic->state == SMIC_HOSED) { |
| init_smic_data(smic, smic->io); |
| return SI_SM_HOSED; |
| } |
| if (smic->state != SMIC_IDLE) { |
| if (smic_debug & SMIC_DEBUG_STATES) { |
| printk(KERN_INFO |
| "smic_event - smic->smic_timeout = %ld," |
| " time = %ld\n", |
| smic->smic_timeout, time); |
| } |
| /* FIXME: smic_event is sometimes called with time > SMIC_RETRY_TIMEOUT */ |
| if (time < SMIC_RETRY_TIMEOUT) { |
| smic->smic_timeout -= time; |
| if (smic->smic_timeout < 0) { |
| start_error_recovery(smic, "smic timed out."); |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| } |
| } |
| flags = read_smic_flags(smic); |
| if (flags & SMIC_FLAG_BSY) |
| return SI_SM_CALL_WITH_DELAY; |
| |
| status = read_smic_status (smic); |
| if (smic_debug & SMIC_DEBUG_STATES) |
| printk(KERN_INFO |
| "smic_event - state = %d, flags = 0x%02x," |
| " status = 0x%02x\n", |
| smic->state, flags, status); |
| |
| switch (smic->state) { |
| case SMIC_IDLE: |
| /* in IDLE we check for available messages */ |
| if (flags & (SMIC_SMI | |
| SMIC_EVM_DATA_AVAIL | SMIC_SMS_DATA_AVAIL)) |
| { |
| return SI_SM_ATTN; |
| } |
| return SI_SM_IDLE; |
| |
| case SMIC_START_OP: |
| /* sanity check whether smic is really idle */ |
| write_smic_control(smic, SMIC_CC_SMS_GET_STATUS); |
| write_smic_flags(smic, flags | SMIC_FLAG_BSY); |
| smic->state = SMIC_OP_OK; |
| break; |
| |
| case SMIC_OP_OK: |
| if (status != SMIC_SC_SMS_READY) { |
| /* this should not happen */ |
| start_error_recovery(smic, |
| "state = SMIC_OP_OK," |
| " status != SMIC_SC_SMS_READY"); |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| /* OK so far; smic is idle let us start ... */ |
| write_smic_control(smic, SMIC_CC_SMS_WR_START); |
| write_next_byte(smic); |
| write_smic_flags(smic, flags | SMIC_FLAG_BSY); |
| smic->state = SMIC_WRITE_START; |
| break; |
| |
| case SMIC_WRITE_START: |
| if (status != SMIC_SC_SMS_WR_START) { |
| start_error_recovery(smic, |
| "state = SMIC_WRITE_START, " |
| "status != SMIC_SC_SMS_WR_START"); |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| /* we must not issue WR_(NEXT|END) unless |
| TX_DATA_READY is set */ |
| if (flags & SMIC_TX_DATA_READY) { |
| if (smic->write_count == 1) { |
| /* last byte */ |
| write_smic_control(smic, SMIC_CC_SMS_WR_END); |
| smic->state = SMIC_WRITE_END; |
| } else { |
| write_smic_control(smic, SMIC_CC_SMS_WR_NEXT); |
| smic->state = SMIC_WRITE_NEXT; |
| } |
| write_next_byte(smic); |
| write_smic_flags(smic, flags | SMIC_FLAG_BSY); |
| } |
| else { |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| break; |
| |
| case SMIC_WRITE_NEXT: |
| if (status != SMIC_SC_SMS_WR_NEXT) { |
| start_error_recovery(smic, |
| "state = SMIC_WRITE_NEXT, " |
| "status != SMIC_SC_SMS_WR_NEXT"); |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| /* this is the same code as in SMIC_WRITE_START */ |
| if (flags & SMIC_TX_DATA_READY) { |
| if (smic->write_count == 1) { |
| write_smic_control(smic, SMIC_CC_SMS_WR_END); |
| smic->state = SMIC_WRITE_END; |
| } |
| else { |
| write_smic_control(smic, SMIC_CC_SMS_WR_NEXT); |
| smic->state = SMIC_WRITE_NEXT; |
| } |
| write_next_byte(smic); |
| write_smic_flags(smic, flags | SMIC_FLAG_BSY); |
| } |
| else { |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| break; |
| |
| case SMIC_WRITE_END: |
| if (status != SMIC_SC_SMS_WR_END) { |
| start_error_recovery (smic, |
| "state = SMIC_WRITE_END, " |
| "status != SMIC_SC_SMS_WR_END"); |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| /* data register holds an error code */ |
| data = read_smic_data(smic); |
| if (data != 0) { |
| if (smic_debug & SMIC_DEBUG_ENABLE) { |
| printk(KERN_INFO |
| "SMIC_WRITE_END: data = %02x\n", data); |
| } |
| start_error_recovery(smic, |
| "state = SMIC_WRITE_END, " |
| "data != SUCCESS"); |
| return SI_SM_CALL_WITH_DELAY; |
| } else { |
| smic->state = SMIC_WRITE2READ; |
| } |
| break; |
| |
| case SMIC_WRITE2READ: |
| /* we must wait for RX_DATA_READY to be set before we |
| can continue */ |
| if (flags & SMIC_RX_DATA_READY) { |
| write_smic_control(smic, SMIC_CC_SMS_RD_START); |
| write_smic_flags(smic, flags | SMIC_FLAG_BSY); |
| smic->state = SMIC_READ_START; |
| } else { |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| break; |
| |
| case SMIC_READ_START: |
| if (status != SMIC_SC_SMS_RD_START) { |
| start_error_recovery(smic, |
| "state = SMIC_READ_START, " |
| "status != SMIC_SC_SMS_RD_START"); |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| if (flags & SMIC_RX_DATA_READY) { |
| read_next_byte(smic); |
| write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); |
| write_smic_flags(smic, flags | SMIC_FLAG_BSY); |
| smic->state = SMIC_READ_NEXT; |
| } else { |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| break; |
| |
| case SMIC_READ_NEXT: |
| switch (status) { |
| /* smic tells us that this is the last byte to be read |
| --> clean up */ |
| case SMIC_SC_SMS_RD_END: |
| read_next_byte(smic); |
| write_smic_control(smic, SMIC_CC_SMS_RD_END); |
| write_smic_flags(smic, flags | SMIC_FLAG_BSY); |
| smic->state = SMIC_READ_END; |
| break; |
| case SMIC_SC_SMS_RD_NEXT: |
| if (flags & SMIC_RX_DATA_READY) { |
| read_next_byte(smic); |
| write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); |
| write_smic_flags(smic, flags | SMIC_FLAG_BSY); |
| smic->state = SMIC_READ_NEXT; |
| } else { |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| break; |
| default: |
| start_error_recovery( |
| smic, |
| "state = SMIC_READ_NEXT, " |
| "status != SMIC_SC_SMS_RD_(NEXT|END)"); |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| break; |
| |
| case SMIC_READ_END: |
| if (status != SMIC_SC_SMS_READY) { |
| start_error_recovery(smic, |
| "state = SMIC_READ_END, " |
| "status != SMIC_SC_SMS_READY"); |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| data = read_smic_data(smic); |
| /* data register holds an error code */ |
| if (data != 0) { |
| if (smic_debug & SMIC_DEBUG_ENABLE) { |
| printk(KERN_INFO |
| "SMIC_READ_END: data = %02x\n", data); |
| } |
| start_error_recovery(smic, |
| "state = SMIC_READ_END, " |
| "data != SUCCESS"); |
| return SI_SM_CALL_WITH_DELAY; |
| } else { |
| smic->state = SMIC_IDLE; |
| return SI_SM_TRANSACTION_COMPLETE; |
| } |
| |
| case SMIC_HOSED: |
| init_smic_data(smic, smic->io); |
| return SI_SM_HOSED; |
| |
| default: |
| if (smic_debug & SMIC_DEBUG_ENABLE) { |
| printk(KERN_WARNING "smic->state = %d\n", smic->state); |
| start_error_recovery(smic, "state = UNKNOWN"); |
| return SI_SM_CALL_WITH_DELAY; |
| } |
| } |
| smic->smic_timeout = SMIC_RETRY_TIMEOUT; |
| return SI_SM_CALL_WITHOUT_DELAY; |
| } |
| |
| static int smic_detect(struct si_sm_data *smic) |
| { |
| /* It's impossible for the SMIC fnags register to be all 1's, |
| (assuming a properly functioning, self-initialized BMC) |
| but that's what you get from reading a bogus address, so we |
| test that first. */ |
| if (read_smic_flags(smic) == 0xff) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void smic_cleanup(struct si_sm_data *kcs) |
| { |
| } |
| |
| static int smic_size(void) |
| { |
| return sizeof(struct si_sm_data); |
| } |
| |
| struct si_sm_handlers smic_smi_handlers = |
| { |
| .version = IPMI_SMIC_VERSION, |
| .init_data = init_smic_data, |
| .start_transaction = start_smic_transaction, |
| .get_result = smic_get_result, |
| .event = smic_event, |
| .detect = smic_detect, |
| .cleanup = smic_cleanup, |
| .size = smic_size, |
| }; |