power_supply: bq2415x_charger: Add ACPI support
Replace of_property_read_u32() with device_property_read_u32(), which is a
wrapper over ACPI and device tree enumeration methods.
When ACPI enumeration is used, automode is not supported. Therefore,
bq2415x_charger does not update its input current automatically, depending
on the USB port type that is connected to. Input current may be updated via
sysfs.
Signed-off-by: Anda-Maria Nicolae <anda-maria.nicolae@intel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c
index 2cf8ec7..e98dcb6 100644
--- a/drivers/power/bq2415x_charger.c
+++ b/drivers/power/bq2415x_charger.c
@@ -35,6 +35,7 @@
#include <linux/idr.h>
#include <linux/i2c.h>
#include <linux/slab.h>
+#include <linux/acpi.h>
#include <linux/power/bq2415x_charger.h>
@@ -1530,13 +1531,14 @@
{
int ret;
int num;
- char *name;
+ char *name = NULL;
struct bq2415x_device *bq;
struct device_node *np = client->dev.of_node;
struct bq2415x_platform_data *pdata = client->dev.platform_data;
+ const struct acpi_device_id *acpi_id = NULL;
- if (!np && !pdata) {
- dev_err(&client->dev, "platform data missing\n");
+ if (!np && !pdata && !ACPI_HANDLE(&client->dev)) {
+ dev_err(&client->dev, "Neither devicetree, nor platform data, nor ACPI support\n");
return -ENODEV;
}
@@ -1547,7 +1549,14 @@
if (num < 0)
return num;
- name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num);
+ if (id) {
+ name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num);
+ } else if (ACPI_HANDLE(&client->dev)) {
+ acpi_id =
+ acpi_match_device(client->dev.driver->acpi_match_table,
+ &client->dev);
+ name = kasprintf(GFP_KERNEL, "%s-%d", acpi_id->id, num);
+ }
if (!name) {
dev_err(&client->dev, "failed to allocate device name\n");
ret = -ENOMEM;
@@ -1573,7 +1582,7 @@
ret = -EPROBE_DEFER;
goto error_2;
}
- } else if (pdata->notify_device) {
+ } else if (pdata && pdata->notify_device) {
bq->notify_psy = power_supply_get_by_name(pdata->notify_device);
} else {
bq->notify_psy = NULL;
@@ -1583,36 +1592,45 @@
bq->id = num;
bq->dev = &client->dev;
- bq->chip = id->driver_data;
+ if (id)
+ bq->chip = id->driver_data;
+ else if (ACPI_HANDLE(bq->dev))
+ bq->chip = acpi_id->driver_data;
bq->name = name;
bq->mode = BQ2415X_MODE_OFF;
bq->reported_mode = BQ2415X_MODE_OFF;
bq->autotimer = 0;
bq->automode = 0;
- if (np) {
- ret = of_property_read_u32(np, "ti,current-limit",
- &bq->init_data.current_limit);
+ if (np || ACPI_HANDLE(bq->dev)) {
+ ret = device_property_read_u32(bq->dev,
+ "ti,current-limit",
+ &bq->init_data.current_limit);
if (ret)
goto error_3;
- ret = of_property_read_u32(np, "ti,weak-battery-voltage",
- &bq->init_data.weak_battery_voltage);
+ ret = device_property_read_u32(bq->dev,
+ "ti,weak-battery-voltage",
+ &bq->init_data.weak_battery_voltage);
if (ret)
goto error_3;
- ret = of_property_read_u32(np, "ti,battery-regulation-voltage",
+ ret = device_property_read_u32(bq->dev,
+ "ti,battery-regulation-voltage",
&bq->init_data.battery_regulation_voltage);
if (ret)
goto error_3;
- ret = of_property_read_u32(np, "ti,charge-current",
- &bq->init_data.charge_current);
+ ret = device_property_read_u32(bq->dev,
+ "ti,charge-current",
+ &bq->init_data.charge_current);
if (ret)
goto error_3;
- ret = of_property_read_u32(np, "ti,termination-current",
- &bq->init_data.termination_current);
+ ret = device_property_read_u32(bq->dev,
+ "ti,termination-current",
+ &bq->init_data.termination_current);
if (ret)
goto error_3;
- ret = of_property_read_u32(np, "ti,resistor-sense",
- &bq->init_data.resistor_sense);
+ ret = device_property_read_u32(bq->dev,
+ "ti,resistor-sense",
+ &bq->init_data.resistor_sense);
if (ret)
goto error_3;
} else {
@@ -1728,9 +1746,28 @@
};
MODULE_DEVICE_TABLE(i2c, bq2415x_i2c_id_table);
+static const struct acpi_device_id bq2415x_i2c_acpi_match[] = {
+ { "BQ2415X", BQUNKNOWN },
+ { "BQ241500", BQ24150 },
+ { "BQA24150", BQ24150A },
+ { "BQ241510", BQ24151 },
+ { "BQA24151", BQ24151A },
+ { "BQ241520", BQ24152 },
+ { "BQ241530", BQ24153 },
+ { "BQA24153", BQ24153A },
+ { "BQ241550", BQ24155 },
+ { "BQ241560", BQ24156 },
+ { "BQA24156", BQ24156A },
+ { "BQS24157", BQ24157S },
+ { "BQ241580", BQ24158 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, bq2415x_i2c_acpi_match);
+
static struct i2c_driver bq2415x_driver = {
.driver = {
.name = "bq2415x-charger",
+ .acpi_match_table = ACPI_PTR(bq2415x_i2c_acpi_match),
},
.probe = bq2415x_probe,
.remove = bq2415x_remove,