ARM: dts: rockchip: move the public part to rk3288-evb common
Rk3288-evb-act8846 and rk3288-evb-rk808 are the power boards of
rk3288-evb, they provide the same power supply interface to the
motherboard. Sort out them, put the public part to rk3288-evb.dtsi,
such as gmac and cpu-supply, leaving only the power section.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 7b768b7..e662147 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -65,10 +65,6 @@
};
};
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
&i2c0 {
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 18eb6cb..736b08b 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -43,17 +43,6 @@
/ {
compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- #clock-cells = <0>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
};
&i2c0 {
@@ -244,19 +233,3 @@
};
};
};
-
-&gmac {
- phy-supply = <&vcc_phy>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "ok";
-};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e78..4faabdb 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -89,6 +89,13 @@
pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
};
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ #clock-cells = <0>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -160,6 +167,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
&emmc {
broken-cd;
bus-width = <8>;
@@ -172,11 +183,6 @@
status = "okay";
};
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -191,6 +197,27 @@
vqmmc-supply = <&vccio_sd>;
};
+&gmac {
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};