hwmon: (it87) Add support for IT8771E and IT8772E
Assume that IT8771E and IT8772E are fully compatible with IT8728F.
IT8771E support contributed by Kelly Anderson.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 29632e8..37fc980 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -19,6 +19,8 @@
* IT8726F Super I/O chip w/LPC interface
* IT8728F Super I/O chip w/LPC interface
* IT8758E Super I/O chip w/LPC interface
+ * IT8771E Super I/O chip w/LPC interface
+ * IT8772E Super I/O chip w/LPC interface
* IT8782F Super I/O chip w/LPC interface
* IT8783E/F Super I/O chip w/LPC interface
* Sis950 A clone of the IT8705F
@@ -61,8 +63,8 @@
#define DRVNAME "it87"
-enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8782,
- it8783 };
+enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
+ it8772, it8782, it8783 };
static unsigned short force_id;
module_param(force_id, ushort, 0);
@@ -140,6 +142,8 @@
#define IT8721F_DEVID 0x8721
#define IT8726F_DEVID 0x8726
#define IT8728F_DEVID 0x8728
+#define IT8771E_DEVID 0x8771
+#define IT8772E_DEVID 0x8772
#define IT8782F_DEVID 0x8782
#define IT8783E_DEVID 0x8783
#define IT87_ACT_REG 0x30
@@ -281,6 +285,24 @@
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
.peci_mask = 0x07,
},
+ [it8771] = {
+ .name = "it8771",
+ .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
+ /* PECI: guesswork */
+ /* 12mV ADC (OHM) */
+ /* 16 bit fans (OHM) */
+ .peci_mask = 0x07,
+ },
+ [it8772] = {
+ .name = "it8772",
+ .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
+ /* PECI (coreboot) */
+ /* 12mV ADC (HWSensors4, OHM) */
+ /* 16 bit fans (HWSensors4, OHM) */
+ .peci_mask = 0x07,
+ },
[it8782] = {
.name = "it8782",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
@@ -1708,6 +1730,12 @@
case IT8728F_DEVID:
sio_data->type = it8728;
break;
+ case IT8771E_DEVID:
+ sio_data->type = it8771;
+ break;
+ case IT8772E_DEVID:
+ sio_data->type = it8772;
+ break;
case IT8782F_DEVID:
sio_data->type = it8782;
break;
@@ -1825,10 +1853,11 @@
reg = superio_inb(IT87_SIO_GPIO3_REG);
if (sio_data->type == it8721 || sio_data->type == it8728 ||
+ sio_data->type == it8771 || sio_data->type == it8772 ||
sio_data->type == it8782) {
/*
* IT8721F/IT8758E, and IT8782F don't have VID pins
- * at all, not sure about the IT8728F.
+ * at all, not sure about the IT8728F and compatibles.
*/
sio_data->skip_vid = 1;
} else {
@@ -1882,7 +1911,9 @@
if (reg & (1 << 0))
sio_data->internal |= (1 << 0);
if ((reg & (1 << 1)) || sio_data->type == it8721 ||
- sio_data->type == it8728)
+ sio_data->type == it8728 ||
+ sio_data->type == it8771 ||
+ sio_data->type == it8772)
sio_data->internal |= (1 << 1);
/*