| config RC_CORE |
| tristate |
| depends on MEDIA_RC_SUPPORT |
| depends on INPUT |
| default y |
| |
| source "drivers/media/rc/keymaps/Kconfig" |
| |
| menuconfig RC_DECODERS |
| bool "Remote controller decoders" |
| depends on RC_CORE |
| default y |
| |
| if RC_DECODERS |
| config LIRC |
| tristate "LIRC interface driver" |
| depends on RC_CORE |
| |
| ---help--- |
| Enable this option to build the Linux Infrared Remote |
| Control (LIRC) core device interface driver. The LIRC |
| interface passes raw IR to and from userspace, where the |
| LIRC daemon handles protocol decoding for IR reception and |
| encoding for IR transmitting (aka "blasting"). |
| |
| config IR_LIRC_CODEC |
| tristate "Enable IR to LIRC bridge" |
| depends on RC_CORE |
| depends on LIRC |
| default y |
| |
| ---help--- |
| Enable this option to pass raw IR to and from userspace via |
| the LIRC interface. |
| |
| |
| config IR_NEC_DECODER |
| tristate "Enable IR raw decoder for the NEC protocol" |
| depends on RC_CORE |
| select BITREVERSE |
| default y |
| |
| ---help--- |
| Enable this option if you have IR with NEC protocol, and |
| if the IR is decoded in software |
| |
| config IR_RC5_DECODER |
| tristate "Enable IR raw decoder for the RC-5 protocol" |
| depends on RC_CORE |
| select BITREVERSE |
| default y |
| |
| ---help--- |
| Enable this option if you have IR with RC-5 protocol, and |
| if the IR is decoded in software |
| |
| config IR_RC6_DECODER |
| tristate "Enable IR raw decoder for the RC6 protocol" |
| depends on RC_CORE |
| select BITREVERSE |
| default y |
| |
| ---help--- |
| Enable this option if you have an infrared remote control which |
| uses the RC6 protocol, and you need software decoding support. |
| |
| config IR_JVC_DECODER |
| tristate "Enable IR raw decoder for the JVC protocol" |
| depends on RC_CORE |
| select BITREVERSE |
| default y |
| |
| ---help--- |
| Enable this option if you have an infrared remote control which |
| uses the JVC protocol, and you need software decoding support. |
| |
| config IR_SONY_DECODER |
| tristate "Enable IR raw decoder for the Sony protocol" |
| depends on RC_CORE |
| select BITREVERSE |
| default y |
| |
| ---help--- |
| Enable this option if you have an infrared remote control which |
| uses the Sony protocol, and you need software decoding support. |
| |
| config IR_RC5_SZ_DECODER |
| tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol" |
| depends on RC_CORE |
| select BITREVERSE |
| default y |
| |
| ---help--- |
| Enable this option if you have IR with RC-5 (streamzap) protocol, |
| and if the IR is decoded in software. (The Streamzap PC Remote |
| uses an IR protocol that is almost standard RC-5, but not quite, |
| as it uses an additional bit). |
| |
| config IR_SANYO_DECODER |
| tristate "Enable IR raw decoder for the Sanyo protocol" |
| depends on RC_CORE |
| default y |
| |
| ---help--- |
| Enable this option if you have an infrared remote control which |
| uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes), |
| and you need software decoding support. |
| |
| config IR_SHARP_DECODER |
| tristate "Enable IR raw decoder for the Sharp protocol" |
| depends on RC_CORE |
| default y |
| |
| ---help--- |
| Enable this option if you have an infrared remote control which |
| uses the Sharp protocol, and you need software decoding support. |
| |
| config IR_MCE_KBD_DECODER |
| tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" |
| depends on RC_CORE |
| select BITREVERSE |
| default y |
| |
| ---help--- |
| Enable this option if you have a Microsoft Remote Keyboard for |
| Windows Media Center Edition, which you would like to use with |
| a raw IR receiver in your system. |
| endif #RC_DECODERS |
| |
| menuconfig RC_DEVICES |
| bool "Remote Controller devices" |
| depends on RC_CORE |
| |
| if RC_DEVICES |
| |
| config RC_ATI_REMOTE |
| tristate "ATI / X10 based USB RF remote controls" |
| depends on USB_ARCH_HAS_HCD |
| depends on RC_CORE |
| select USB |
| help |
| Say Y here if you want to use an X10 based USB remote control. |
| These are RF remotes with USB receivers. |
| |
| Such devices include the ATI remote that comes with many of ATI's |
| All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote, |
| Medion RF remote, and SnapStream FireFly remote. |
| |
| This driver provides mouse pointer, left and right mouse buttons, |
| and maps all the other remote buttons to keypress events. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ati_remote. |
| |
| config IR_ENE |
| tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" |
| depends on PNP |
| depends on RC_CORE |
| ---help--- |
| Say Y here to enable support for integrated infrared receiver |
| /transceiver made by ENE. |
| |
| You can see if you have it by looking at lspnp output. |
| Output should include ENE0100 ENE0200 or something similar. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ene_ir. |
| |
| config IR_IMON |
| tristate "SoundGraph iMON Receiver and Display" |
| depends on USB_ARCH_HAS_HCD |
| depends on RC_CORE |
| select USB |
| ---help--- |
| Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) |
| IR Receiver and/or LCD/VFD/VGA display. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called imon. |
| |
| config IR_MCEUSB |
| tristate "Windows Media Center Ed. eHome Infrared Transceiver" |
| depends on USB_ARCH_HAS_HCD |
| depends on RC_CORE |
| select USB |
| ---help--- |
| Say Y here if you want to use a Windows Media Center Edition |
| eHome Infrared Transceiver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mceusb. |
| |
| config IR_ITE_CIR |
| tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" |
| depends on PNP |
| depends on RC_CORE |
| ---help--- |
| Say Y here to enable support for integrated infrared receivers |
| /transceivers made by ITE Tech Inc. These are found in |
| several ASUS devices, like the ASUS Digimatrix or the ASUS |
| EEEBox 1501U. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ite-cir. |
| |
| config IR_FINTEK |
| tristate "Fintek Consumer Infrared Transceiver" |
| depends on PNP |
| depends on RC_CORE |
| ---help--- |
| Say Y here to enable support for integrated infrared receiver |
| /transciever made by Fintek. This chip is found on assorted |
| Jetway motherboards (and of course, possibly others). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called fintek-cir. |
| |
| config IR_NUVOTON |
| tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" |
| depends on PNP |
| depends on RC_CORE |
| ---help--- |
| Say Y here to enable support for integrated infrared receiver |
| /transciever made by Nuvoton (formerly Winbond). This chip is |
| found in the ASRock ION 330HT, as well as assorted Intel |
| DP55-series motherboards (and of course, possibly others). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called nuvoton-cir. |
| |
| config IR_REDRAT3 |
| tristate "RedRat3 IR Transceiver" |
| depends on USB_ARCH_HAS_HCD |
| depends on RC_CORE |
| select NEW_LEDS |
| select LEDS_CLASS |
| select USB |
| ---help--- |
| Say Y here if you want to use a RedRat3 Infrared Transceiver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called redrat3. |
| |
| config IR_STREAMZAP |
| tristate "Streamzap PC Remote IR Receiver" |
| depends on USB_ARCH_HAS_HCD |
| depends on RC_CORE |
| select USB |
| ---help--- |
| Say Y here if you want to use a Streamzap PC Remote |
| Infrared Receiver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called streamzap. |
| |
| config IR_WINBOND_CIR |
| tristate "Winbond IR remote control" |
| depends on X86 && PNP |
| depends on RC_CORE |
| select NEW_LEDS |
| select LEDS_CLASS |
| select BITREVERSE |
| ---help--- |
| Say Y here if you want to use the IR remote functionality found |
| in some Winbond SuperI/O chips. Currently only the WPCD376I |
| chip is supported (included in some Intel Media series |
| motherboards). |
| |
| To compile this driver as a module, choose M here: the module will |
| be called winbond_cir. |
| |
| config IR_IGUANA |
| tristate "IguanaWorks USB IR Transceiver" |
| depends on USB_ARCH_HAS_HCD |
| depends on RC_CORE |
| select USB |
| ---help--- |
| Say Y here if you want to use the IguanaWorks USB IR Transceiver. |
| Both infrared receive and send are supported. If you want to |
| change the ID or the pin config, use the user space driver from |
| IguanaWorks. |
| |
| Only firmware 0x0205 and later is supported. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called iguanair. |
| |
| config IR_TTUSBIR |
| tristate "TechnoTrend USB IR Receiver" |
| depends on USB_ARCH_HAS_HCD |
| depends on RC_CORE |
| select USB |
| select NEW_LEDS |
| select LEDS_CLASS |
| ---help--- |
| Say Y here if you want to use the TechnoTrend USB IR Receiver. The |
| driver can control the led. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called ttusbir. |
| |
| config IR_RX51 |
| tristate "Nokia N900 IR transmitter diode" |
| depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM |
| ---help--- |
| Say Y or M here if you want to enable support for the IR |
| transmitter diode built in the Nokia N900 (RX51) device. |
| |
| The driver uses omap DM timers for generating the carrier |
| wave and pulses. |
| |
| config RC_LOOPBACK |
| tristate "Remote Control Loopback Driver" |
| depends on RC_CORE |
| ---help--- |
| Say Y here if you want support for the remote control loopback |
| driver which allows TX data to be sent back as RX data. |
| This is mostly useful for debugging purposes. |
| |
| If you're not sure, select N here. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called rc_loopback. |
| |
| config IR_GPIO_CIR |
| tristate "GPIO IR remote control" |
| depends on RC_CORE |
| ---help--- |
| Say Y if you want to use GPIO based IR Receiver. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called gpio-ir-recv. |
| |
| config RC_ST |
| tristate "ST remote control receiver" |
| depends on ARCH_STI && RC_CORE |
| help |
| Say Y here if you want support for ST remote control driver |
| which allows both IR and UHF RX. |
| The driver passes raw pulse and space information to the LIRC decoder. |
| |
| If you're not sure, select N here. |
| |
| endif #RC_DEVICES |