| /* |
| * linux/arch/arm/mach-imx/irq.c |
| * |
| * Copyright (C) 1999 ARM Limited |
| * Copyright (C) 2002 Shane Nay (shane@minirl.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * 03/03/2004 Sascha Hauer <sascha@saschahauer.de> |
| * Copied from the motorola bsp package and added gpio demux |
| * interrupt handler |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/timer.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| |
| #include <asm/mach/irq.h> |
| |
| /* |
| * |
| * We simply use the ENABLE DISABLE registers inside of the IMX |
| * to turn on/off specific interrupts. FIXME- We should |
| * also add support for the accelerated interrupt controller |
| * by putting offets to irq jump code in the appropriate |
| * places. |
| * |
| */ |
| |
| #define INTENNUM_OFF 0x8 |
| #define INTDISNUM_OFF 0xC |
| |
| #define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE) |
| #define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF) |
| #define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF) |
| |
| #if 0 |
| #define DEBUG_IRQ(fmt...) printk(fmt) |
| #else |
| #define DEBUG_IRQ(fmt...) do { } while (0) |
| #endif |
| |
| static void |
| imx_mask_irq(unsigned int irq) |
| { |
| __raw_writel(irq, IMX_AITC_INTDISNUM); |
| } |
| |
| static void |
| imx_unmask_irq(unsigned int irq) |
| { |
| __raw_writel(irq, IMX_AITC_INTENNUM); |
| } |
| |
| static int |
| imx_gpio_irq_type(unsigned int _irq, unsigned int type) |
| { |
| unsigned int irq_type = 0, irq, reg, bit; |
| |
| irq = _irq - IRQ_GPIOA(0); |
| reg = irq >> 5; |
| bit = 1 << (irq % 32); |
| |
| if (type == IRQT_PROBE) { |
| /* Don't mess with enabled GPIOs using preconfigured edges or |
| GPIOs set to alternate function during probe */ |
| /* TODO: support probe */ |
| // if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) & |
| // GPIO_bit(gpio)) |
| // return 0; |
| // if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) |
| // return 0; |
| // type = __IRQT_RISEDGE | __IRQT_FALEDGE; |
| } |
| |
| GIUS(reg) |= bit; |
| DDIR(reg) &= ~(bit); |
| |
| DEBUG_IRQ("setting type of irq %d to ", _irq); |
| |
| if (type & __IRQT_RISEDGE) { |
| DEBUG_IRQ("rising edges\n"); |
| irq_type = 0x0; |
| } |
| if (type & __IRQT_FALEDGE) { |
| DEBUG_IRQ("falling edges\n"); |
| irq_type = 0x1; |
| } |
| if (type & __IRQT_LOWLVL) { |
| DEBUG_IRQ("low level\n"); |
| irq_type = 0x3; |
| } |
| if (type & __IRQT_HIGHLVL) { |
| DEBUG_IRQ("high level\n"); |
| irq_type = 0x2; |
| } |
| |
| if (irq % 32 < 16) { |
| ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) | |
| (irq_type << ((irq % 16) * 2)); |
| } else { |
| ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) | |
| (irq_type << ((irq % 16) * 2)); |
| } |
| |
| return 0; |
| |
| } |
| |
| static void |
| imx_gpio_ack_irq(unsigned int irq) |
| { |
| DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq); |
| ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32); |
| } |
| |
| static void |
| imx_gpio_mask_irq(unsigned int irq) |
| { |
| DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq); |
| IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32)); |
| } |
| |
| static void |
| imx_gpio_unmask_irq(unsigned int irq) |
| { |
| DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq); |
| IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32); |
| } |
| |
| static void |
| imx_gpio_handler(unsigned int mask, unsigned int irq, |
| struct irq_desc *desc) |
| { |
| desc = irq_desc + irq; |
| while (mask) { |
| if (mask & 1) { |
| DEBUG_IRQ("handling irq %d\n", irq); |
| desc_handle_irq(irq, desc); |
| } |
| irq++; |
| desc++; |
| mask >>= 1; |
| } |
| } |
| |
| static void |
| imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) |
| { |
| unsigned int mask, irq; |
| |
| mask = ISR(0); |
| irq = IRQ_GPIOA(0); |
| imx_gpio_handler(mask, irq, desc); |
| } |
| |
| static void |
| imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) |
| { |
| unsigned int mask, irq; |
| |
| mask = ISR(1); |
| irq = IRQ_GPIOB(0); |
| imx_gpio_handler(mask, irq, desc); |
| } |
| |
| static void |
| imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) |
| { |
| unsigned int mask, irq; |
| |
| mask = ISR(2); |
| irq = IRQ_GPIOC(0); |
| imx_gpio_handler(mask, irq, desc); |
| } |
| |
| static void |
| imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) |
| { |
| unsigned int mask, irq; |
| |
| mask = ISR(3); |
| irq = IRQ_GPIOD(0); |
| imx_gpio_handler(mask, irq, desc); |
| } |
| |
| static struct irq_chip imx_internal_chip = { |
| .name = "MPU", |
| .ack = imx_mask_irq, |
| .mask = imx_mask_irq, |
| .unmask = imx_unmask_irq, |
| }; |
| |
| static struct irq_chip imx_gpio_chip = { |
| .name = "GPIO", |
| .ack = imx_gpio_ack_irq, |
| .mask = imx_gpio_mask_irq, |
| .unmask = imx_gpio_unmask_irq, |
| .set_type = imx_gpio_irq_type, |
| }; |
| |
| void __init |
| imx_init_irq(void) |
| { |
| unsigned int irq; |
| |
| DEBUG_IRQ("Initializing imx interrupts\n"); |
| |
| /* Mask all interrupts initially */ |
| IMR(0) = 0; |
| IMR(1) = 0; |
| IMR(2) = 0; |
| IMR(3) = 0; |
| |
| for (irq = 0; irq < IMX_IRQS; irq++) { |
| set_irq_chip(irq, &imx_internal_chip); |
| set_irq_handler(irq, handle_level_irq); |
| set_irq_flags(irq, IRQF_VALID); |
| } |
| |
| for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) { |
| set_irq_chip(irq, &imx_gpio_chip); |
| set_irq_handler(irq, handle_edge_irq); |
| set_irq_flags(irq, IRQF_VALID); |
| } |
| |
| set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler); |
| set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler); |
| set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler); |
| set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler); |
| |
| /* Disable all interrupts initially. */ |
| /* In IMX this is done in the bootloader. */ |
| } |