| /* |
| * LEDs driver for LT3593 controllers |
| * |
| * See the datasheet at http://cds.linear.com/docs/Datasheet/3593f.pdf |
| * |
| * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> |
| * |
| * Based on leds-gpio.c, |
| * |
| * Copyright (C) 2007 8D Technologies inc. |
| * Raphael Assenat <raph@8d.com> |
| * Copyright (C) 2008 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/leds.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| |
| struct lt3593_led_data { |
| struct led_classdev cdev; |
| unsigned gpio; |
| }; |
| |
| static int lt3593_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct lt3593_led_data *led_dat = |
| container_of(led_cdev, struct lt3593_led_data, cdev); |
| int pulses; |
| |
| /* |
| * The LT3593 resets its internal current level register to the maximum |
| * level on the first falling edge on the control pin. Each following |
| * falling edge decreases the current level by 625uA. Up to 32 pulses |
| * can be sent, so the maximum power reduction is 20mA. |
| * After a timeout of 128us, the value is taken from the register and |
| * applied is to the output driver. |
| */ |
| |
| if (value == 0) { |
| gpio_set_value_cansleep(led_dat->gpio, 0); |
| return 0; |
| } |
| |
| pulses = 32 - (value * 32) / 255; |
| |
| if (pulses == 0) { |
| gpio_set_value_cansleep(led_dat->gpio, 0); |
| mdelay(1); |
| gpio_set_value_cansleep(led_dat->gpio, 1); |
| return 0; |
| } |
| |
| gpio_set_value_cansleep(led_dat->gpio, 1); |
| |
| while (pulses--) { |
| gpio_set_value_cansleep(led_dat->gpio, 0); |
| udelay(1); |
| gpio_set_value_cansleep(led_dat->gpio, 1); |
| udelay(1); |
| } |
| |
| return 0; |
| } |
| |
| static int create_lt3593_led(const struct gpio_led *template, |
| struct lt3593_led_data *led_dat, struct device *parent) |
| { |
| int ret, state; |
| |
| /* skip leds on GPIOs that aren't available */ |
| if (!gpio_is_valid(template->gpio)) { |
| dev_info(parent, "%s: skipping unavailable LT3593 LED at gpio %d (%s)\n", |
| KBUILD_MODNAME, template->gpio, template->name); |
| return 0; |
| } |
| |
| led_dat->cdev.name = template->name; |
| led_dat->cdev.default_trigger = template->default_trigger; |
| led_dat->gpio = template->gpio; |
| |
| led_dat->cdev.brightness_set_blocking = lt3593_led_set; |
| |
| state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); |
| led_dat->cdev.brightness = state ? LED_FULL : LED_OFF; |
| |
| if (!template->retain_state_suspended) |
| led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; |
| |
| ret = devm_gpio_request_one(parent, template->gpio, state ? |
| GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, |
| template->name); |
| if (ret < 0) |
| return ret; |
| |
| ret = led_classdev_register(parent, &led_dat->cdev); |
| if (ret < 0) |
| return ret; |
| |
| dev_info(parent, "%s: registered LT3593 LED '%s' at GPIO %d\n", |
| KBUILD_MODNAME, template->name, template->gpio); |
| |
| return 0; |
| } |
| |
| static void delete_lt3593_led(struct lt3593_led_data *led) |
| { |
| if (!gpio_is_valid(led->gpio)) |
| return; |
| |
| led_classdev_unregister(&led->cdev); |
| } |
| |
| static int lt3593_led_probe(struct platform_device *pdev) |
| { |
| struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev); |
| struct lt3593_led_data *leds_data; |
| int i, ret = 0; |
| |
| if (!pdata) |
| return -EBUSY; |
| |
| leds_data = devm_kzalloc(&pdev->dev, |
| sizeof(struct lt3593_led_data) * pdata->num_leds, |
| GFP_KERNEL); |
| if (!leds_data) |
| return -ENOMEM; |
| |
| for (i = 0; i < pdata->num_leds; i++) { |
| ret = create_lt3593_led(&pdata->leds[i], &leds_data[i], |
| &pdev->dev); |
| if (ret < 0) |
| goto err; |
| } |
| |
| platform_set_drvdata(pdev, leds_data); |
| |
| return 0; |
| |
| err: |
| for (i = i - 1; i >= 0; i--) |
| delete_lt3593_led(&leds_data[i]); |
| |
| return ret; |
| } |
| |
| static int lt3593_led_remove(struct platform_device *pdev) |
| { |
| int i; |
| struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev); |
| struct lt3593_led_data *leds_data; |
| |
| leds_data = platform_get_drvdata(pdev); |
| |
| for (i = 0; i < pdata->num_leds; i++) |
| delete_lt3593_led(&leds_data[i]); |
| |
| return 0; |
| } |
| |
| static struct platform_driver lt3593_led_driver = { |
| .probe = lt3593_led_probe, |
| .remove = lt3593_led_remove, |
| .driver = { |
| .name = "leds-lt3593", |
| }, |
| }; |
| |
| module_platform_driver(lt3593_led_driver); |
| |
| MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); |
| MODULE_DESCRIPTION("LED driver for LT3593 controllers"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:leds-lt3593"); |