| /* |
| * Rockchip usb PHY driver |
| * |
| * Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com> |
| * Copyright (C) 2014 ROCKCHIP, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/reset.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/syscon.h> |
| |
| /* |
| * The higher 16-bit of this register is used for write protection |
| * only if BIT(13 + 16) set to 1 the BIT(13) can be written. |
| */ |
| #define SIDDQ_WRITE_ENA BIT(29) |
| #define SIDDQ_ON BIT(13) |
| #define SIDDQ_OFF (0 << 13) |
| |
| struct rockchip_usb_phy { |
| unsigned int reg_offset; |
| struct regmap *reg_base; |
| struct clk *clk; |
| struct phy *phy; |
| }; |
| |
| static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, |
| bool siddq) |
| { |
| return regmap_write(phy->reg_base, phy->reg_offset, |
| SIDDQ_WRITE_ENA | (siddq ? SIDDQ_ON : SIDDQ_OFF)); |
| } |
| |
| static int rockchip_usb_phy_power_off(struct phy *_phy) |
| { |
| struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); |
| int ret = 0; |
| |
| /* Power down usb phy analog blocks by set siddq 1 */ |
| ret = rockchip_usb_phy_power(phy, 1); |
| if (ret) |
| return ret; |
| |
| clk_disable_unprepare(phy->clk); |
| |
| return 0; |
| } |
| |
| static int rockchip_usb_phy_power_on(struct phy *_phy) |
| { |
| struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); |
| int ret = 0; |
| |
| ret = clk_prepare_enable(phy->clk); |
| if (ret) |
| return ret; |
| |
| /* Power up usb phy analog blocks by set siddq 0 */ |
| ret = rockchip_usb_phy_power(phy, 0); |
| if (ret) { |
| clk_disable_unprepare(phy->clk); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct phy_ops ops = { |
| .power_on = rockchip_usb_phy_power_on, |
| .power_off = rockchip_usb_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int rockchip_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct rockchip_usb_phy *rk_phy; |
| struct phy_provider *phy_provider; |
| struct device_node *child; |
| struct regmap *grf; |
| unsigned int reg_offset; |
| |
| grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf"); |
| if (IS_ERR(grf)) { |
| dev_err(&pdev->dev, "Missing rockchip,grf property\n"); |
| return PTR_ERR(grf); |
| } |
| |
| for_each_available_child_of_node(dev->of_node, child) { |
| rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL); |
| if (!rk_phy) |
| return -ENOMEM; |
| |
| if (of_property_read_u32(child, "reg", ®_offset)) { |
| dev_err(dev, "missing reg property in node %s\n", |
| child->name); |
| return -EINVAL; |
| } |
| |
| rk_phy->reg_offset = reg_offset; |
| rk_phy->reg_base = grf; |
| |
| rk_phy->clk = of_clk_get_by_name(child, "phyclk"); |
| if (IS_ERR(rk_phy->clk)) |
| rk_phy->clk = NULL; |
| |
| rk_phy->phy = devm_phy_create(dev, child, &ops); |
| if (IS_ERR(rk_phy->phy)) { |
| dev_err(dev, "failed to create PHY\n"); |
| return PTR_ERR(rk_phy->phy); |
| } |
| phy_set_drvdata(rk_phy->phy, rk_phy); |
| } |
| |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static const struct of_device_id rockchip_usb_phy_dt_ids[] = { |
| { .compatible = "rockchip,rk3288-usb-phy" }, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids); |
| |
| static struct platform_driver rockchip_usb_driver = { |
| .probe = rockchip_usb_phy_probe, |
| .driver = { |
| .name = "rockchip-usb-phy", |
| .owner = THIS_MODULE, |
| .of_match_table = rockchip_usb_phy_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(rockchip_usb_driver); |
| |
| MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>"); |
| MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver"); |
| MODULE_LICENSE("GPL v2"); |