arch/sparc/kernel/pci_sabre.c - kernel/msm-4.9 - Gitiles

 /* pci_sabre.c: Sabre specific PCI controller support.
  *
  * Copyright (C) 1997, 1998, 1999, 2007 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1998, 1999 Eddie C. Dost   (ecd@skynet.be)
  * Copyright (C) 1999 Jakub Jelinek   (jakub@redhat.com)
  */

 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/of_device.h>

 #include <asm/apb.h>
 #include <asm/iommu.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
 #include <asm/upa.h>

 #include "pci_impl.h"
 #include "iommu_common.h"
 #include "psycho_common.h"

 #define DRIVER_NAME	"sabre"
 #define PFX		DRIVER_NAME ": "

 /* SABRE PCI controller register offsets and definitions. */
 #define SABRE_UE_AFSR		0x0030UL
 #define  SABRE_UEAFSR_PDRD	 0x4000000000000000UL	/* Primary PCI DMA Read */
 #define  SABRE_UEAFSR_PDWR	 0x2000000000000000UL	/* Primary PCI DMA Write */
 #define  SABRE_UEAFSR_SDRD	 0x0800000000000000UL	/* Secondary PCI DMA Read */
 #define  SABRE_UEAFSR_SDWR	 0x0400000000000000UL	/* Secondary PCI DMA Write */
 #define  SABRE_UEAFSR_SDTE	 0x0200000000000000UL	/* Secondary DMA Translation Error */
 #define  SABRE_UEAFSR_PDTE	 0x0100000000000000UL	/* Primary DMA Translation Error */
 #define  SABRE_UEAFSR_BMSK	 0x0000ffff00000000UL	/* Bytemask */
 #define  SABRE_UEAFSR_OFF	 0x00000000e0000000UL	/* Offset (AFAR bits [5:3] */
 #define  SABRE_UEAFSR_BLK	 0x0000000000800000UL	/* Was block operation */
 #define SABRE_UECE_AFAR		0x0038UL
 #define SABRE_CE_AFSR		0x0040UL
 #define  SABRE_CEAFSR_PDRD	 0x4000000000000000UL	/* Primary PCI DMA Read */
 #define  SABRE_CEAFSR_PDWR	 0x2000000000000000UL	/* Primary PCI DMA Write */
 #define  SABRE_CEAFSR_SDRD	 0x0800000000000000UL	/* Secondary PCI DMA Read */
 #define  SABRE_CEAFSR_SDWR	 0x0400000000000000UL	/* Secondary PCI DMA Write */
 #define  SABRE_CEAFSR_ESYND	 0x00ff000000000000UL	/* ECC Syndrome */
 #define  SABRE_CEAFSR_BMSK	 0x0000ffff00000000UL	/* Bytemask */
 #define  SABRE_CEAFSR_OFF	 0x00000000e0000000UL	/* Offset */
 #define  SABRE_CEAFSR_BLK	 0x0000000000800000UL	/* Was block operation */
 #define SABRE_UECE_AFAR_ALIAS	0x0048UL	/* Aliases to 0x0038 */
 #define SABRE_IOMMU_CONTROL	0x0200UL
 #define  SABRE_IOMMUCTRL_ERRSTS	 0x0000000006000000UL	/* Error status bits */
 #define  SABRE_IOMMUCTRL_ERR	 0x0000000001000000UL	/* Error present in IOTLB */
 #define  SABRE_IOMMUCTRL_LCKEN	 0x0000000000800000UL	/* IOTLB lock enable */
 #define  SABRE_IOMMUCTRL_LCKPTR	 0x0000000000780000UL	/* IOTLB lock pointer */
 #define  SABRE_IOMMUCTRL_TSBSZ	 0x0000000000070000UL	/* TSB Size */
 #define  SABRE_IOMMU_TSBSZ_1K   0x0000000000000000
 #define  SABRE_IOMMU_TSBSZ_2K   0x0000000000010000
 #define  SABRE_IOMMU_TSBSZ_4K   0x0000000000020000
 #define  SABRE_IOMMU_TSBSZ_8K   0x0000000000030000
 #define  SABRE_IOMMU_TSBSZ_16K  0x0000000000040000
 #define  SABRE_IOMMU_TSBSZ_32K  0x0000000000050000
 #define  SABRE_IOMMU_TSBSZ_64K  0x0000000000060000
 #define  SABRE_IOMMU_TSBSZ_128K 0x0000000000070000
 #define  SABRE_IOMMUCTRL_TBWSZ	 0x0000000000000004UL	/* TSB assumed page size */
 #define  SABRE_IOMMUCTRL_DENAB	 0x0000000000000002UL	/* Diagnostic Mode Enable */
 #define  SABRE_IOMMUCTRL_ENAB	 0x0000000000000001UL	/* IOMMU Enable */
 #define SABRE_IOMMU_TSBBASE	0x0208UL
 #define SABRE_IOMMU_FLUSH	0x0210UL
 #define SABRE_IMAP_A_SLOT0	0x0c00UL
 #define SABRE_IMAP_B_SLOT0	0x0c20UL
 #define SABRE_IMAP_SCSI		0x1000UL
 #define SABRE_IMAP_ETH		0x1008UL
 #define SABRE_IMAP_BPP		0x1010UL
 #define SABRE_IMAP_AU_REC	0x1018UL
 #define SABRE_IMAP_AU_PLAY	0x1020UL
 #define SABRE_IMAP_PFAIL	0x1028UL
 #define SABRE_IMAP_KMS		0x1030UL
 #define SABRE_IMAP_FLPY		0x1038UL
 #define SABRE_IMAP_SHW		0x1040UL
 #define SABRE_IMAP_KBD		0x1048UL
 #define SABRE_IMAP_MS		0x1050UL
 #define SABRE_IMAP_SER		0x1058UL
 #define SABRE_IMAP_UE		0x1070UL
 #define SABRE_IMAP_CE		0x1078UL
 #define SABRE_IMAP_PCIERR	0x1080UL
 #define SABRE_IMAP_GFX		0x1098UL
 #define SABRE_IMAP_EUPA		0x10a0UL
 #define SABRE_ICLR_A_SLOT0	0x1400UL
 #define SABRE_ICLR_B_SLOT0	0x1480UL
 #define SABRE_ICLR_SCSI		0x1800UL
 #define SABRE_ICLR_ETH		0x1808UL
 #define SABRE_ICLR_BPP		0x1810UL
 #define SABRE_ICLR_AU_REC	0x1818UL
 #define SABRE_ICLR_AU_PLAY	0x1820UL
 #define SABRE_ICLR_PFAIL	0x1828UL
 #define SABRE_ICLR_KMS		0x1830UL
 #define SABRE_ICLR_FLPY		0x1838UL
 #define SABRE_ICLR_SHW		0x1840UL
 #define SABRE_ICLR_KBD		0x1848UL
 #define SABRE_ICLR_MS		0x1850UL
 #define SABRE_ICLR_SER		0x1858UL
 #define SABRE_ICLR_UE		0x1870UL
 #define SABRE_ICLR_CE		0x1878UL
 #define SABRE_ICLR_PCIERR	0x1880UL
 #define SABRE_WRSYNC		0x1c20UL
 #define SABRE_PCICTRL		0x2000UL
 #define  SABRE_PCICTRL_MRLEN	 0x0000001000000000UL	/* Use MemoryReadLine for block loads/stores */
 #define  SABRE_PCICTRL_SERR	 0x0000000400000000UL	/* Set when SERR asserted on PCI bus */
 #define  SABRE_PCICTRL_ARBPARK	 0x0000000000200000UL	/* Bus Parking 0=Ultra-IIi 1=prev-bus-owner */
 #define  SABRE_PCICTRL_CPUPRIO	 0x0000000000100000UL	/* Ultra-IIi granted every other bus cycle */
 #define  SABRE_PCICTRL_ARBPRIO	 0x00000000000f0000UL	/* Slot which is granted every other bus cycle */
 #define  SABRE_PCICTRL_ERREN	 0x0000000000000100UL	/* PCI Error Interrupt Enable */
 #define  SABRE_PCICTRL_RTRYWE	 0x0000000000000080UL	/* DMA Flow Control 0=wait-if-possible 1=retry */
 #define  SABRE_PCICTRL_AEN	 0x000000000000000fUL	/* Slot PCI arbitration enables */
 #define SABRE_PIOAFSR		0x2010UL
 #define  SABRE_PIOAFSR_PMA	 0x8000000000000000UL	/* Primary Master Abort */
 #define  SABRE_PIOAFSR_PTA	 0x4000000000000000UL	/* Primary Target Abort */
 #define  SABRE_PIOAFSR_PRTRY	 0x2000000000000000UL	/* Primary Excessive Retries */
 #define  SABRE_PIOAFSR_PPERR	 0x1000000000000000UL	/* Primary Parity Error */
 #define  SABRE_PIOAFSR_SMA	 0x0800000000000000UL	/* Secondary Master Abort */
 #define  SABRE_PIOAFSR_STA	 0x0400000000000000UL	/* Secondary Target Abort */
 #define  SABRE_PIOAFSR_SRTRY	 0x0200000000000000UL	/* Secondary Excessive Retries */
 #define  SABRE_PIOAFSR_SPERR	 0x0100000000000000UL	/* Secondary Parity Error */
 #define  SABRE_PIOAFSR_BMSK	 0x0000ffff00000000UL	/* Byte Mask */
 #define  SABRE_PIOAFSR_BLK	 0x0000000080000000UL	/* Was Block Operation */
 #define SABRE_PIOAFAR		0x2018UL
 #define SABRE_PCIDIAG		0x2020UL
 #define  SABRE_PCIDIAG_DRTRY	 0x0000000000000040UL	/* Disable PIO Retry Limit */
 #define  SABRE_PCIDIAG_IPAPAR	 0x0000000000000008UL	/* Invert PIO Address Parity */
 #define  SABRE_PCIDIAG_IPDPAR	 0x0000000000000004UL	/* Invert PIO Data Parity */
 #define  SABRE_PCIDIAG_IDDPAR	 0x0000000000000002UL	/* Invert DMA Data Parity */
 #define  SABRE_PCIDIAG_ELPBK	 0x0000000000000001UL	/* Loopback Enable - not supported */
 #define SABRE_PCITASR		0x2028UL
 #define  SABRE_PCITASR_EF	 0x0000000000000080UL	/* Respond to 0xe0000000-0xffffffff */
 #define  SABRE_PCITASR_CD	 0x0000000000000040UL	/* Respond to 0xc0000000-0xdfffffff */
 #define  SABRE_PCITASR_AB	 0x0000000000000020UL	/* Respond to 0xa0000000-0xbfffffff */
 #define  SABRE_PCITASR_89	 0x0000000000000010UL	/* Respond to 0x80000000-0x9fffffff */
 #define  SABRE_PCITASR_67	 0x0000000000000008UL	/* Respond to 0x60000000-0x7fffffff */
 #define  SABRE_PCITASR_45	 0x0000000000000004UL	/* Respond to 0x40000000-0x5fffffff */
 #define  SABRE_PCITASR_23	 0x0000000000000002UL	/* Respond to 0x20000000-0x3fffffff */
 #define  SABRE_PCITASR_01	 0x0000000000000001UL	/* Respond to 0x00000000-0x1fffffff */
 #define SABRE_PIOBUF_DIAG	0x5000UL
 #define SABRE_DMABUF_DIAGLO	0x5100UL
 #define SABRE_DMABUF_DIAGHI	0x51c0UL
 #define SABRE_IMAP_GFX_ALIAS	0x6000UL	/* Aliases to 0x1098 */
 #define SABRE_IMAP_EUPA_ALIAS	0x8000UL	/* Aliases to 0x10a0 */
 #define SABRE_IOMMU_VADIAG	0xa400UL
 #define SABRE_IOMMU_TCDIAG	0xa408UL
 #define SABRE_IOMMU_TAG		0xa580UL
 #define  SABRE_IOMMUTAG_ERRSTS	 0x0000000001800000UL	/* Error status bits */
 #define  SABRE_IOMMUTAG_ERR	 0x0000000000400000UL	/* Error present */
 #define  SABRE_IOMMUTAG_WRITE	 0x0000000000200000UL	/* Page is writable */
 #define  SABRE_IOMMUTAG_STREAM	 0x0000000000100000UL	/* Streamable bit - unused */
 #define  SABRE_IOMMUTAG_SIZE	 0x0000000000080000UL	/* 0=8k 1=16k */
 #define  SABRE_IOMMUTAG_VPN	 0x000000000007ffffUL	/* Virtual Page Number [31:13] */
 #define SABRE_IOMMU_DATA	0xa600UL
 #define SABRE_IOMMUDATA_VALID	 0x0000000040000000UL	/* Valid */
 #define SABRE_IOMMUDATA_USED	 0x0000000020000000UL	/* Used (for LRU algorithm) */
 #define SABRE_IOMMUDATA_CACHE	 0x0000000010000000UL	/* Cacheable */
 #define SABRE_IOMMUDATA_PPN	 0x00000000001fffffUL	/* Physical Page Number [33:13] */
 #define SABRE_PCI_IRQSTATE	0xa800UL
 #define SABRE_OBIO_IRQSTATE	0xa808UL
 #define SABRE_FFBCFG		0xf000UL
 #define  SABRE_FFBCFG_SPRQS	 0x000000000f000000	/* Slave P_RQST queue size */
 #define  SABRE_FFBCFG_ONEREAD	 0x0000000000004000	/* Slave supports one outstanding read */
 #define SABRE_MCCTRL0		0xf010UL
 #define  SABRE_MCCTRL0_RENAB	 0x0000000080000000	/* Refresh Enable */
 #define  SABRE_MCCTRL0_EENAB	 0x0000000010000000	/* Enable all ECC functions */
 #define  SABRE_MCCTRL0_11BIT	 0x0000000000001000	/* Enable 11-bit column addressing */
 #define  SABRE_MCCTRL0_DPP	 0x0000000000000f00	/* DIMM Pair Present Bits */
 #define  SABRE_MCCTRL0_RINTVL	 0x00000000000000ff	/* Refresh Interval */
 #define SABRE_MCCTRL1		0xf018UL
 #define  SABRE_MCCTRL1_AMDC	 0x0000000038000000	/* Advance Memdata Clock */
 #define  SABRE_MCCTRL1_ARDC	 0x0000000007000000	/* Advance DRAM Read Data Clock */
 #define  SABRE_MCCTRL1_CSR	 0x0000000000e00000	/* CAS to RAS delay for CBR refresh */
 #define  SABRE_MCCTRL1_CASRW	 0x00000000001c0000	/* CAS length for read/write */
 #define  SABRE_MCCTRL1_RCD	 0x0000000000038000	/* RAS to CAS delay */
 #define  SABRE_MCCTRL1_CP	 0x0000000000007000	/* CAS Precharge */
 #define  SABRE_MCCTRL1_RP	 0x0000000000000e00	/* RAS Precharge */
 #define  SABRE_MCCTRL1_RAS	 0x00000000000001c0	/* Length of RAS for refresh */
 #define  SABRE_MCCTRL1_CASRW2	 0x0000000000000038	/* Must be same as CASRW */
 #define  SABRE_MCCTRL1_RSC	 0x0000000000000007	/* RAS after CAS hold time */
 #define SABRE_RESETCTRL		0xf020UL

 #define SABRE_CONFIGSPACE	0x001000000UL
 #define SABRE_IOSPACE		0x002000000UL
 #define SABRE_IOSPACE_SIZE	0x000ffffffUL
 #define SABRE_MEMSPACE		0x100000000UL
 #define SABRE_MEMSPACE_SIZE	0x07fffffffUL

 static int hummingbird_p;
 static struct pci_bus *sabre_root_bus;

 static irqreturn_t sabre_ue_intr(int irq, void *dev_id)
 {
 	struct pci_pbm_info *pbm = dev_id;
 	unsigned long afsr_reg = pbm->controller_regs + SABRE_UE_AFSR;
 	unsigned long afar_reg = pbm->controller_regs + SABRE_UECE_AFAR;
 	unsigned long afsr, afar, error_bits;
 	int reported;

 	/* Latch uncorrectable error status. */
 	afar = upa_readq(afar_reg);
 	afsr = upa_readq(afsr_reg);

 	/* Clear the primary/secondary error status bits. */
 	error_bits = afsr &
 		(SABRE_UEAFSR_PDRD | SABRE_UEAFSR_PDWR |
 		 SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR |
 		 SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE);
 	if (!error_bits)
 		return IRQ_NONE;
 	upa_writeq(error_bits, afsr_reg);

 	/* Log the error. */
 	printk("%s: Uncorrectable Error, primary error type[%s%s]\n",
 	       pbm->name,
 	       ((error_bits & SABRE_UEAFSR_PDRD) ?
 		"DMA Read" :
 		((error_bits & SABRE_UEAFSR_PDWR) ?
 		 "DMA Write" : "???")),
 	       ((error_bits & SABRE_UEAFSR_PDTE) ?
 		":Translation Error" : ""));
 	printk("%s: bytemask[%04lx] dword_offset[%lx] was_block(%d)\n",
 	       pbm->name,
 	       (afsr & SABRE_UEAFSR_BMSK) >> 32UL,
 	       (afsr & SABRE_UEAFSR_OFF) >> 29UL,
 	       ((afsr & SABRE_UEAFSR_BLK) ? 1 : 0));
 	printk("%s: UE AFAR [%016lx]\n", pbm->name, afar);
 	printk("%s: UE Secondary errors [", pbm->name);
 	reported = 0;
 	if (afsr & SABRE_UEAFSR_SDRD) {
 		reported++;
 		printk("(DMA Read)");
 	}
 	if (afsr & SABRE_UEAFSR_SDWR) {
 		reported++;
 		printk("(DMA Write)");
 	}
 	if (afsr & SABRE_UEAFSR_SDTE) {
 		reported++;
 		printk("(Translation Error)");
 	}
 	if (!reported)
 		printk("(none)");
 	printk("]\n");

 	/* Interrogate IOMMU for error status. */
 	psycho_check_iommu_error(pbm, afsr, afar, UE_ERR);

 	return IRQ_HANDLED;
 }

 static irqreturn_t sabre_ce_intr(int irq, void *dev_id)
 {
 	struct pci_pbm_info *pbm = dev_id;
 	unsigned long afsr_reg = pbm->controller_regs + SABRE_CE_AFSR;
 	unsigned long afar_reg = pbm->controller_regs + SABRE_UECE_AFAR;
 	unsigned long afsr, afar, error_bits;
 	int reported;

 	/* Latch error status. */
 	afar = upa_readq(afar_reg);
 	afsr = upa_readq(afsr_reg);

 	/* Clear primary/secondary error status bits. */
 	error_bits = afsr &
 		(SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR |
 		 SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR);
 	if (!error_bits)
 		return IRQ_NONE;
 	upa_writeq(error_bits, afsr_reg);

 	/* Log the error. */
 	printk("%s: Correctable Error, primary error type[%s]\n",
 	       pbm->name,
 	       ((error_bits & SABRE_CEAFSR_PDRD) ?
 		"DMA Read" :
 		((error_bits & SABRE_CEAFSR_PDWR) ?
 		 "DMA Write" : "???")));

 	/* XXX Use syndrome and afar to print out module string just like
 	 * XXX UDB CE trap handler does... -DaveM
 	 */
 	printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] "
 	       "was_block(%d)\n",
 	       pbm->name,
 	       (afsr & SABRE_CEAFSR_ESYND) >> 48UL,
 	       (afsr & SABRE_CEAFSR_BMSK) >> 32UL,
 	       (afsr & SABRE_CEAFSR_OFF) >> 29UL,
 	       ((afsr & SABRE_CEAFSR_BLK) ? 1 : 0));
 	printk("%s: CE AFAR [%016lx]\n", pbm->name, afar);
 	printk("%s: CE Secondary errors [", pbm->name);
 	reported = 0;
 	if (afsr & SABRE_CEAFSR_SDRD) {
 		reported++;
 		printk("(DMA Read)");
 	}
 	if (afsr & SABRE_CEAFSR_SDWR) {
 		reported++;
 		printk("(DMA Write)");
 	}
 	if (!reported)
 		printk("(none)");
 	printk("]\n");

 	return IRQ_HANDLED;
 }

 static void sabre_register_error_handlers(struct pci_pbm_info *pbm)
 {
 	struct device_node *dp = pbm->op->dev.of_node;
 	struct platform_device *op;
 	unsigned long base = pbm->controller_regs;
 	u64 tmp;
 	int err;

 	if (pbm->chip_type == PBM_CHIP_TYPE_SABRE)
 		dp = dp->parent;

 	op = of_find_device_by_node(dp);
 	if (!op)
 		return;

 	/* Sabre/Hummingbird IRQ property layout is:
 	 * 0: PCI ERR
 	 * 1: UE ERR
 	 * 2: CE ERR
 	 * 3: POWER FAIL
 	 */
 	if (op->archdata.num_irqs < 4)
 		return;

 	/* We clear the error bits in the appropriate AFSR before
 	 * registering the handler so that we don't get spurious
 	 * interrupts.
 	 */
 	upa_writeq((SABRE_UEAFSR_PDRD | SABRE_UEAFSR_PDWR |
 		    SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR |
 		    SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE),
 		   base + SABRE_UE_AFSR);

 	err = request_irq(op->archdata.irqs[1], sabre_ue_intr, 0, "SABRE_UE", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Couldn't register UE, err=%d.\n",
 		       pbm->name, err);

 	upa_writeq((SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR |
 		    SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR),
 		   base + SABRE_CE_AFSR);


 	err = request_irq(op->archdata.irqs[2], sabre_ce_intr, 0, "SABRE_CE", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Couldn't register CE, err=%d.\n",
 		       pbm->name, err);
 	err = request_irq(op->archdata.irqs[0], psycho_pcierr_intr, 0,
 			  "SABRE_PCIERR", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Couldn't register PCIERR, err=%d.\n",
 		       pbm->name, err);

 	tmp = upa_readq(base + SABRE_PCICTRL);
 	tmp |= SABRE_PCICTRL_ERREN;
 	upa_writeq(tmp, base + SABRE_PCICTRL);
 }

 static void apb_init(struct pci_bus *sabre_bus)
 {
 	struct pci_dev *pdev;

 	list_for_each_entry(pdev, &sabre_bus->devices, bus_list) {
 		if (pdev->vendor == PCI_VENDOR_ID_SUN &&
 		    pdev->device == PCI_DEVICE_ID_SUN_SIMBA) {
 			u16 word16;

 			pci_read_config_word(pdev, PCI_COMMAND, &word16);
 			word16 |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
 				PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY |
 				PCI_COMMAND_IO;
 			pci_write_config_word(pdev, PCI_COMMAND, word16);

 			/* Status register bits are "write 1 to clear". */
 			pci_write_config_word(pdev, PCI_STATUS, 0xffff);
 			pci_write_config_word(pdev, PCI_SEC_STATUS, 0xffff);

 			/* Use a primary/seconday latency timer value
 			 * of 64.
 			 */
 			pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
 			pci_write_config_byte(pdev, PCI_SEC_LATENCY_TIMER, 64);

 			/* Enable reporting/forwarding of master aborts,
 			 * parity, and SERR.
 			 */
 			pci_write_config_byte(pdev, PCI_BRIDGE_CONTROL,
 					      (PCI_BRIDGE_CTL_PARITY |
 					       PCI_BRIDGE_CTL_SERR |
 					       PCI_BRIDGE_CTL_MASTER_ABORT));
 		}
 	}
 }

 static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm,
 				     struct device *parent)
 {
 	static int once;

 	/* The APB bridge speaks to the Sabre host PCI bridge
 	 * at 66Mhz, but the front side of APB runs at 33Mhz
 	 * for both segments.
 	 *
 	 * Hummingbird systems do not use APB, so they run
 	 * at 66MHZ.
 	 */
 	if (hummingbird_p)
 		pbm->is_66mhz_capable = 1;
 	else
 		pbm->is_66mhz_capable = 0;

 	/* This driver has not been verified to handle
 	 * multiple SABREs yet, so trap this.
 	 *
 	 * Also note that the SABRE host bridge is hardwired
 	 * to live at bus 0.
 	 */
 	if (once != 0) {
 		printk(KERN_ERR PFX "Multiple controllers unsupported.\n");
 		return;
 	}
 	once++;

 	pbm->pci_bus = pci_scan_one_pbm(pbm, parent);
 	if (!pbm->pci_bus)
 		return;

 	sabre_root_bus = pbm->pci_bus;

 	apb_init(pbm->pci_bus);

 	sabre_register_error_handlers(pbm);
 }

 static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm,
 				     struct platform_device *op)
 {
 	psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE);
 	pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR;
 	pbm->pci_afar = pbm->controller_regs + SABRE_PIOAFAR;
 	pbm->pci_csr = pbm->controller_regs + SABRE_PCICTRL;
 	sabre_scan_bus(pbm, &op->dev);
 }

 static const struct of_device_id sabre_match[];
 static int __devinit sabre_probe(struct platform_device *op)
 {
 	const struct of_device_id *match;
 	const struct linux_prom64_registers *pr_regs;
 	struct device_node *dp = op->dev.of_node;
 	struct pci_pbm_info *pbm;
 	u32 upa_portid, dma_mask;
 	struct iommu *iommu;
 	int tsbsize, err;
 	const u32 *vdma;
 	u64 clear_irq;

 	match = of_match_device(sabre_match, &op->dev);
 	hummingbird_p = match && (match->data != NULL);
 	if (!hummingbird_p) {
 		struct device_node *cpu_dp;

 		/* Of course, Sun has to encode things a thousand
 		 * different ways, inconsistently.
 		 */
 		for_each_node_by_type(cpu_dp, "cpu") {
 			if (!strcmp(cpu_dp->name, "SUNW,UltraSPARC-IIe"))
 				hummingbird_p = 1;
 		}
 	}

 	err = -ENOMEM;
 	pbm = kzalloc(sizeof(*pbm), GFP_KERNEL);
 	if (!pbm) {
 		printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n");
 		goto out_err;
 	}

 	iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
 	if (!iommu) {
 		printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n");
 		goto out_free_controller;
 	}

 	pbm->iommu = iommu;

 	upa_portid = of_getintprop_default(dp, "upa-portid", 0xff);

 	pbm->portid = upa_portid;

 	/*
 	 * Map in SABRE register set and report the presence of this SABRE.
 	 */

 	pr_regs = of_get_property(dp, "reg", NULL);
 	err = -ENODEV;
 	if (!pr_regs) {
 		printk(KERN_ERR PFX "No reg property\n");
 		goto out_free_iommu;
 	}

 	/*
 	 * First REG in property is base of entire SABRE register space.
 	 */
 	pbm->controller_regs = pr_regs[0].phys_addr;

 	/* Clear interrupts */

 	/* PCI first */
 	for (clear_irq = SABRE_ICLR_A_SLOT0; clear_irq < SABRE_ICLR_B_SLOT0 + 0x80; clear_irq += 8)
 		upa_writeq(0x0UL, pbm->controller_regs + clear_irq);

 	/* Then OBIO */
 	for (clear_irq = SABRE_ICLR_SCSI; clear_irq < SABRE_ICLR_SCSI + 0x80; clear_irq += 8)
 		upa_writeq(0x0UL, pbm->controller_regs + clear_irq);

 	/* Error interrupts are enabled later after the bus scan. */
 	upa_writeq((SABRE_PCICTRL_MRLEN   | SABRE_PCICTRL_SERR |
 		    SABRE_PCICTRL_ARBPARK | SABRE_PCICTRL_AEN),
 		   pbm->controller_regs + SABRE_PCICTRL);

 	/* Now map in PCI config space for entire SABRE. */
 	pbm->config_space = pbm->controller_regs + SABRE_CONFIGSPACE;

 	vdma = of_get_property(dp, "virtual-dma", NULL);
 	if (!vdma) {
 		printk(KERN_ERR PFX "No virtual-dma property\n");
 		goto out_free_iommu;
 	}

 	dma_mask = vdma[0];
 	switch(vdma[1]) {
 		case 0x20000000:
 			dma_mask |= 0x1fffffff;
 			tsbsize = 64;
 			break;
 		case 0x40000000:
 			dma_mask |= 0x3fffffff;
 			tsbsize = 128;
 			break;

 		case 0x80000000:
 			dma_mask |= 0x7fffffff;
 			tsbsize = 128;
 			break;
 		default:
 			printk(KERN_ERR PFX "Strange virtual-dma size.\n");
 			goto out_free_iommu;
 	}

 	err = psycho_iommu_init(pbm, tsbsize, vdma[0], dma_mask, SABRE_WRSYNC);
 	if (err)
 		goto out_free_iommu;

 	/*
 	 * Look for APB underneath.
 	 */
 	sabre_pbm_init(pbm, op);

 	pbm->next = pci_pbm_root;
 	pci_pbm_root = pbm;

 	dev_set_drvdata(&op->dev, pbm);

 	return 0;

 out_free_iommu:
 	kfree(pbm->iommu);

 out_free_controller:
 	kfree(pbm);

 out_err:
 	return err;
 }

 static const struct of_device_id sabre_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pci108e,a001",
 		.data = (void *) 1,
 	},
 	{
 		.name = "pci",
 		.compatible = "pci108e,a000",
 	},
 	{},
 };

 static struct platform_driver sabre_driver = {
 	.driver = {
 		.name = DRIVER_NAME,
 		.owner = THIS_MODULE,
 		.of_match_table = sabre_match,
 	},
 	.probe		= sabre_probe,
 };

 static int __init sabre_init(void)
 {
 	return platform_driver_register(&sabre_driver);
 }

 subsys_initcall(sabre_init);
	/* pci_sabre.c: Sabre specific PCI controller support.
	*
	* Copyright (C) 1997, 1998, 1999, 2007 David S. Miller (davem@davemloft.net)
	* Copyright (C) 1998, 1999 Eddie C. Dost (ecd@skynet.be)
	* Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
	*/

	#include <linux/kernel.h>
	#include <linux/types.h>
	#include <linux/pci.h>
	#include <linux/init.h>
	#include <linux/slab.h>
	#include <linux/interrupt.h>
	#include <linux/of_device.h>

	#include <asm/apb.h>
	#include <asm/iommu.h>
	#include <asm/irq.h>
	#include <asm/prom.h>
	#include <asm/upa.h>

	#include "pci_impl.h"
	#include "iommu_common.h"
	#include "psycho_common.h"

	#define DRIVER_NAME "sabre"
	#define PFX DRIVER_NAME ": "

	/* SABRE PCI controller register offsets and definitions. */
	#define SABRE_UE_AFSR 0x0030UL
	#define SABRE_UEAFSR_PDRD 0x4000000000000000UL /* Primary PCI DMA Read */
	#define SABRE_UEAFSR_PDWR 0x2000000000000000UL /* Primary PCI DMA Write */
	#define SABRE_UEAFSR_SDRD 0x0800000000000000UL /* Secondary PCI DMA Read */
	#define SABRE_UEAFSR_SDWR 0x0400000000000000UL /* Secondary PCI DMA Write */
	#define SABRE_UEAFSR_SDTE 0x0200000000000000UL /* Secondary DMA Translation Error */
	#define SABRE_UEAFSR_PDTE 0x0100000000000000UL /* Primary DMA Translation Error */
	#define SABRE_UEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask */
	#define SABRE_UEAFSR_OFF 0x00000000e0000000UL /* Offset (AFAR bits [5:3] */
	#define SABRE_UEAFSR_BLK 0x0000000000800000UL /* Was block operation */
	#define SABRE_UECE_AFAR 0x0038UL
	#define SABRE_CE_AFSR 0x0040UL
	#define SABRE_CEAFSR_PDRD 0x4000000000000000UL /* Primary PCI DMA Read */
	#define SABRE_CEAFSR_PDWR 0x2000000000000000UL /* Primary PCI DMA Write */
	#define SABRE_CEAFSR_SDRD 0x0800000000000000UL /* Secondary PCI DMA Read */
	#define SABRE_CEAFSR_SDWR 0x0400000000000000UL /* Secondary PCI DMA Write */
	#define SABRE_CEAFSR_ESYND 0x00ff000000000000UL /* ECC Syndrome */
	#define SABRE_CEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask */
	#define SABRE_CEAFSR_OFF 0x00000000e0000000UL /* Offset */
	#define SABRE_CEAFSR_BLK 0x0000000000800000UL /* Was block operation */
	#define SABRE_UECE_AFAR_ALIAS 0x0048UL /* Aliases to 0x0038 */
	#define SABRE_IOMMU_CONTROL 0x0200UL
	#define SABRE_IOMMUCTRL_ERRSTS 0x0000000006000000UL /* Error status bits */
	#define SABRE_IOMMUCTRL_ERR 0x0000000001000000UL /* Error present in IOTLB */
	#define SABRE_IOMMUCTRL_LCKEN 0x0000000000800000UL /* IOTLB lock enable */
	#define SABRE_IOMMUCTRL_LCKPTR 0x0000000000780000UL /* IOTLB lock pointer */
	#define SABRE_IOMMUCTRL_TSBSZ 0x0000000000070000UL /* TSB Size */
	#define SABRE_IOMMU_TSBSZ_1K 0x0000000000000000
	#define SABRE_IOMMU_TSBSZ_2K 0x0000000000010000
	#define SABRE_IOMMU_TSBSZ_4K 0x0000000000020000
	#define SABRE_IOMMU_TSBSZ_8K 0x0000000000030000
	#define SABRE_IOMMU_TSBSZ_16K 0x0000000000040000
	#define SABRE_IOMMU_TSBSZ_32K 0x0000000000050000
	#define SABRE_IOMMU_TSBSZ_64K 0x0000000000060000
	#define SABRE_IOMMU_TSBSZ_128K 0x0000000000070000
	#define SABRE_IOMMUCTRL_TBWSZ 0x0000000000000004UL /* TSB assumed page size */
	#define SABRE_IOMMUCTRL_DENAB 0x0000000000000002UL /* Diagnostic Mode Enable */
	#define SABRE_IOMMUCTRL_ENAB 0x0000000000000001UL /* IOMMU Enable */
	#define SABRE_IOMMU_TSBBASE 0x0208UL
	#define SABRE_IOMMU_FLUSH 0x0210UL
	#define SABRE_IMAP_A_SLOT0 0x0c00UL
	#define SABRE_IMAP_B_SLOT0 0x0c20UL
	#define SABRE_IMAP_SCSI 0x1000UL
	#define SABRE_IMAP_ETH 0x1008UL
	#define SABRE_IMAP_BPP 0x1010UL
	#define SABRE_IMAP_AU_REC 0x1018UL
	#define SABRE_IMAP_AU_PLAY 0x1020UL
	#define SABRE_IMAP_PFAIL 0x1028UL
	#define SABRE_IMAP_KMS 0x1030UL
	#define SABRE_IMAP_FLPY 0x1038UL
	#define SABRE_IMAP_SHW 0x1040UL
	#define SABRE_IMAP_KBD 0x1048UL
	#define SABRE_IMAP_MS 0x1050UL
	#define SABRE_IMAP_SER 0x1058UL
	#define SABRE_IMAP_UE 0x1070UL
	#define SABRE_IMAP_CE 0x1078UL
	#define SABRE_IMAP_PCIERR 0x1080UL
	#define SABRE_IMAP_GFX 0x1098UL
	#define SABRE_IMAP_EUPA 0x10a0UL
	#define SABRE_ICLR_A_SLOT0 0x1400UL
	#define SABRE_ICLR_B_SLOT0 0x1480UL
	#define SABRE_ICLR_SCSI 0x1800UL
	#define SABRE_ICLR_ETH 0x1808UL
	#define SABRE_ICLR_BPP 0x1810UL
	#define SABRE_ICLR_AU_REC 0x1818UL
	#define SABRE_ICLR_AU_PLAY 0x1820UL
	#define SABRE_ICLR_PFAIL 0x1828UL
	#define SABRE_ICLR_KMS 0x1830UL
	#define SABRE_ICLR_FLPY 0x1838UL
	#define SABRE_ICLR_SHW 0x1840UL
	#define SABRE_ICLR_KBD 0x1848UL
	#define SABRE_ICLR_MS 0x1850UL
	#define SABRE_ICLR_SER 0x1858UL
	#define SABRE_ICLR_UE 0x1870UL
	#define SABRE_ICLR_CE 0x1878UL
	#define SABRE_ICLR_PCIERR 0x1880UL
	#define SABRE_WRSYNC 0x1c20UL
	#define SABRE_PCICTRL 0x2000UL
	#define SABRE_PCICTRL_MRLEN 0x0000001000000000UL /* Use MemoryReadLine for block loads/stores */
	#define SABRE_PCICTRL_SERR 0x0000000400000000UL /* Set when SERR asserted on PCI bus */
	#define SABRE_PCICTRL_ARBPARK 0x0000000000200000UL /* Bus Parking 0=Ultra-IIi 1=prev-bus-owner */
	#define SABRE_PCICTRL_CPUPRIO 0x0000000000100000UL /* Ultra-IIi granted every other bus cycle */
	#define SABRE_PCICTRL_ARBPRIO 0x00000000000f0000UL /* Slot which is granted every other bus cycle */
	#define SABRE_PCICTRL_ERREN 0x0000000000000100UL /* PCI Error Interrupt Enable */
	#define SABRE_PCICTRL_RTRYWE 0x0000000000000080UL /* DMA Flow Control 0=wait-if-possible 1=retry */
	#define SABRE_PCICTRL_AEN 0x000000000000000fUL /* Slot PCI arbitration enables */
	#define SABRE_PIOAFSR 0x2010UL
	#define SABRE_PIOAFSR_PMA 0x8000000000000000UL /* Primary Master Abort */
	#define SABRE_PIOAFSR_PTA 0x4000000000000000UL /* Primary Target Abort */
	#define SABRE_PIOAFSR_PRTRY 0x2000000000000000UL /* Primary Excessive Retries */
	#define SABRE_PIOAFSR_PPERR 0x1000000000000000UL /* Primary Parity Error */
	#define SABRE_PIOAFSR_SMA 0x0800000000000000UL /* Secondary Master Abort */
	#define SABRE_PIOAFSR_STA 0x0400000000000000UL /* Secondary Target Abort */
	#define SABRE_PIOAFSR_SRTRY 0x0200000000000000UL /* Secondary Excessive Retries */
	#define SABRE_PIOAFSR_SPERR 0x0100000000000000UL /* Secondary Parity Error */
	#define SABRE_PIOAFSR_BMSK 0x0000ffff00000000UL /* Byte Mask */
	#define SABRE_PIOAFSR_BLK 0x0000000080000000UL /* Was Block Operation */
	#define SABRE_PIOAFAR 0x2018UL
	#define SABRE_PCIDIAG 0x2020UL
	#define SABRE_PCIDIAG_DRTRY 0x0000000000000040UL /* Disable PIO Retry Limit */
	#define SABRE_PCIDIAG_IPAPAR 0x0000000000000008UL /* Invert PIO Address Parity */
	#define SABRE_PCIDIAG_IPDPAR 0x0000000000000004UL /* Invert PIO Data Parity */
	#define SABRE_PCIDIAG_IDDPAR 0x0000000000000002UL /* Invert DMA Data Parity */
	#define SABRE_PCIDIAG_ELPBK 0x0000000000000001UL /* Loopback Enable - not supported */
	#define SABRE_PCITASR 0x2028UL
	#define SABRE_PCITASR_EF 0x0000000000000080UL /* Respond to 0xe0000000-0xffffffff */
	#define SABRE_PCITASR_CD 0x0000000000000040UL /* Respond to 0xc0000000-0xdfffffff */
	#define SABRE_PCITASR_AB 0x0000000000000020UL /* Respond to 0xa0000000-0xbfffffff */
	#define SABRE_PCITASR_89 0x0000000000000010UL /* Respond to 0x80000000-0x9fffffff */
	#define SABRE_PCITASR_67 0x0000000000000008UL /* Respond to 0x60000000-0x7fffffff */
	#define SABRE_PCITASR_45 0x0000000000000004UL /* Respond to 0x40000000-0x5fffffff */
	#define SABRE_PCITASR_23 0x0000000000000002UL /* Respond to 0x20000000-0x3fffffff */
	#define SABRE_PCITASR_01 0x0000000000000001UL /* Respond to 0x00000000-0x1fffffff */
	#define SABRE_PIOBUF_DIAG 0x5000UL
	#define SABRE_DMABUF_DIAGLO 0x5100UL
	#define SABRE_DMABUF_DIAGHI 0x51c0UL
	#define SABRE_IMAP_GFX_ALIAS 0x6000UL /* Aliases to 0x1098 */
	#define SABRE_IMAP_EUPA_ALIAS 0x8000UL /* Aliases to 0x10a0 */
	#define SABRE_IOMMU_VADIAG 0xa400UL
	#define SABRE_IOMMU_TCDIAG 0xa408UL
	#define SABRE_IOMMU_TAG 0xa580UL
	#define SABRE_IOMMUTAG_ERRSTS 0x0000000001800000UL /* Error status bits */
	#define SABRE_IOMMUTAG_ERR 0x0000000000400000UL /* Error present */
	#define SABRE_IOMMUTAG_WRITE 0x0000000000200000UL /* Page is writable */
	#define SABRE_IOMMUTAG_STREAM 0x0000000000100000UL /* Streamable bit - unused */
	#define SABRE_IOMMUTAG_SIZE 0x0000000000080000UL /* 0=8k 1=16k */
	#define SABRE_IOMMUTAG_VPN 0x000000000007ffffUL /* Virtual Page Number [31:13] */
	#define SABRE_IOMMU_DATA 0xa600UL
	#define SABRE_IOMMUDATA_VALID 0x0000000040000000UL /* Valid */
	#define SABRE_IOMMUDATA_USED 0x0000000020000000UL /* Used (for LRU algorithm) */
	#define SABRE_IOMMUDATA_CACHE 0x0000000010000000UL /* Cacheable */
	#define SABRE_IOMMUDATA_PPN 0x00000000001fffffUL /* Physical Page Number [33:13] */
	#define SABRE_PCI_IRQSTATE 0xa800UL
	#define SABRE_OBIO_IRQSTATE 0xa808UL
	#define SABRE_FFBCFG 0xf000UL
	#define SABRE_FFBCFG_SPRQS 0x000000000f000000 /* Slave P_RQST queue size */
	#define SABRE_FFBCFG_ONEREAD 0x0000000000004000 /* Slave supports one outstanding read */
	#define SABRE_MCCTRL0 0xf010UL
	#define SABRE_MCCTRL0_RENAB 0x0000000080000000 /* Refresh Enable */
	#define SABRE_MCCTRL0_EENAB 0x0000000010000000 /* Enable all ECC functions */
	#define SABRE_MCCTRL0_11BIT 0x0000000000001000 /* Enable 11-bit column addressing */
	#define SABRE_MCCTRL0_DPP 0x0000000000000f00 /* DIMM Pair Present Bits */
	#define SABRE_MCCTRL0_RINTVL 0x00000000000000ff /* Refresh Interval */
	#define SABRE_MCCTRL1 0xf018UL
	#define SABRE_MCCTRL1_AMDC 0x0000000038000000 /* Advance Memdata Clock */
	#define SABRE_MCCTRL1_ARDC 0x0000000007000000 /* Advance DRAM Read Data Clock */
	#define SABRE_MCCTRL1_CSR 0x0000000000e00000 /* CAS to RAS delay for CBR refresh */
	#define SABRE_MCCTRL1_CASRW 0x00000000001c0000 /* CAS length for read/write */
	#define SABRE_MCCTRL1_RCD 0x0000000000038000 /* RAS to CAS delay */
	#define SABRE_MCCTRL1_CP 0x0000000000007000 /* CAS Precharge */
	#define SABRE_MCCTRL1_RP 0x0000000000000e00 /* RAS Precharge */
	#define SABRE_MCCTRL1_RAS 0x00000000000001c0 /* Length of RAS for refresh */
	#define SABRE_MCCTRL1_CASRW2 0x0000000000000038 /* Must be same as CASRW */
	#define SABRE_MCCTRL1_RSC 0x0000000000000007 /* RAS after CAS hold time */
	#define SABRE_RESETCTRL 0xf020UL

	#define SABRE_CONFIGSPACE 0x001000000UL
	#define SABRE_IOSPACE 0x002000000UL
	#define SABRE_IOSPACE_SIZE 0x000ffffffUL
	#define SABRE_MEMSPACE 0x100000000UL
	#define SABRE_MEMSPACE_SIZE 0x07fffffffUL

	static int hummingbird_p;
	static struct pci_bus *sabre_root_bus;

	static irqreturn_t sabre_ue_intr(int irq, void *dev_id)
	{
	struct pci_pbm_info *pbm = dev_id;
	unsigned long afsr_reg = pbm->controller_regs + SABRE_UE_AFSR;
	unsigned long afar_reg = pbm->controller_regs + SABRE_UECE_AFAR;
	unsigned long afsr, afar, error_bits;
	int reported;

	/* Latch uncorrectable error status. */
	afar = upa_readq(afar_reg);
	afsr = upa_readq(afsr_reg);

	/* Clear the primary/secondary error status bits. */
	error_bits = afsr &
	(SABRE_UEAFSR_PDRD \| SABRE_UEAFSR_PDWR \|
	SABRE_UEAFSR_SDRD \| SABRE_UEAFSR_SDWR \|
	SABRE_UEAFSR_SDTE \| SABRE_UEAFSR_PDTE);
	if (!error_bits)
	return IRQ_NONE;
	upa_writeq(error_bits, afsr_reg);

	/* Log the error. */
	printk("%s: Uncorrectable Error, primary error type[%s%s]\n",
	pbm->name,
	((error_bits & SABRE_UEAFSR_PDRD) ?
	"DMA Read" :
	((error_bits & SABRE_UEAFSR_PDWR) ?
	"DMA Write" : "???")),
	((error_bits & SABRE_UEAFSR_PDTE) ?
	":Translation Error" : ""));
	printk("%s: bytemask[%04lx] dword_offset[%lx] was_block(%d)\n",
	pbm->name,
	(afsr & SABRE_UEAFSR_BMSK) >> 32UL,
	(afsr & SABRE_UEAFSR_OFF) >> 29UL,
	((afsr & SABRE_UEAFSR_BLK) ? 1 : 0));
	printk("%s: UE AFAR [%016lx]\n", pbm->name, afar);
	printk("%s: UE Secondary errors [", pbm->name);
	reported = 0;
	if (afsr & SABRE_UEAFSR_SDRD) {
	reported++;
	printk("(DMA Read)");
	}
	if (afsr & SABRE_UEAFSR_SDWR) {
	reported++;
	printk("(DMA Write)");
	}
	if (afsr & SABRE_UEAFSR_SDTE) {
	reported++;
	printk("(Translation Error)");
	}
	if (!reported)
	printk("(none)");
	printk("]\n");

	/* Interrogate IOMMU for error status. */
	psycho_check_iommu_error(pbm, afsr, afar, UE_ERR);

	return IRQ_HANDLED;
	}

	static irqreturn_t sabre_ce_intr(int irq, void *dev_id)
	{
	struct pci_pbm_info *pbm = dev_id;
	unsigned long afsr_reg = pbm->controller_regs + SABRE_CE_AFSR;
	unsigned long afar_reg = pbm->controller_regs + SABRE_UECE_AFAR;
	unsigned long afsr, afar, error_bits;
	int reported;

	/* Latch error status. */
	afar = upa_readq(afar_reg);
	afsr = upa_readq(afsr_reg);

	/* Clear primary/secondary error status bits. */
	error_bits = afsr &
	(SABRE_CEAFSR_PDRD \| SABRE_CEAFSR_PDWR \|
	SABRE_CEAFSR_SDRD \| SABRE_CEAFSR_SDWR);
	if (!error_bits)
	return IRQ_NONE;
	upa_writeq(error_bits, afsr_reg);

	/* Log the error. */
	printk("%s: Correctable Error, primary error type[%s]\n",
	pbm->name,
	((error_bits & SABRE_CEAFSR_PDRD) ?
	"DMA Read" :
	((error_bits & SABRE_CEAFSR_PDWR) ?
	"DMA Write" : "???")));

	/* XXX Use syndrome and afar to print out module string just like
	* XXX UDB CE trap handler does... -DaveM
	*/
	printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] "
	"was_block(%d)\n",
	pbm->name,
	(afsr & SABRE_CEAFSR_ESYND) >> 48UL,
	(afsr & SABRE_CEAFSR_BMSK) >> 32UL,
	(afsr & SABRE_CEAFSR_OFF) >> 29UL,
	((afsr & SABRE_CEAFSR_BLK) ? 1 : 0));
	printk("%s: CE AFAR [%016lx]\n", pbm->name, afar);
	printk("%s: CE Secondary errors [", pbm->name);
	reported = 0;
	if (afsr & SABRE_CEAFSR_SDRD) {
	reported++;
	printk("(DMA Read)");
	}
	if (afsr & SABRE_CEAFSR_SDWR) {
	reported++;
	printk("(DMA Write)");
	}
	if (!reported)
	printk("(none)");
	printk("]\n");

	return IRQ_HANDLED;
	}

	static void sabre_register_error_handlers(struct pci_pbm_info *pbm)
	{
	struct device_node *dp = pbm->op->dev.of_node;
	struct platform_device *op;
	unsigned long base = pbm->controller_regs;
	u64 tmp;
	int err;

	if (pbm->chip_type == PBM_CHIP_TYPE_SABRE)
	dp = dp->parent;

	op = of_find_device_by_node(dp);
	if (!op)
	return;

	/* Sabre/Hummingbird IRQ property layout is:
	* 0: PCI ERR
	* 1: UE ERR
	* 2: CE ERR
	* 3: POWER FAIL
	*/
	if (op->archdata.num_irqs < 4)
	return;

	/* We clear the error bits in the appropriate AFSR before
	* registering the handler so that we don't get spurious
	* interrupts.
	*/
	upa_writeq((SABRE_UEAFSR_PDRD \| SABRE_UEAFSR_PDWR \|
	SABRE_UEAFSR_SDRD \| SABRE_UEAFSR_SDWR \|
	SABRE_UEAFSR_SDTE \| SABRE_UEAFSR_PDTE),
	base + SABRE_UE_AFSR);

	err = request_irq(op->archdata.irqs[1], sabre_ue_intr, 0, "SABRE_UE", pbm);
	if (err)
	printk(KERN_WARNING "%s: Couldn't register UE, err=%d.\n",
	pbm->name, err);

	upa_writeq((SABRE_CEAFSR_PDRD \| SABRE_CEAFSR_PDWR \|
	SABRE_CEAFSR_SDRD \| SABRE_CEAFSR_SDWR),
	base + SABRE_CE_AFSR);


	err = request_irq(op->archdata.irqs[2], sabre_ce_intr, 0, "SABRE_CE", pbm);
	if (err)
	printk(KERN_WARNING "%s: Couldn't register CE, err=%d.\n",
	pbm->name, err);
	err = request_irq(op->archdata.irqs[0], psycho_pcierr_intr, 0,
	"SABRE_PCIERR", pbm);
	if (err)
	printk(KERN_WARNING "%s: Couldn't register PCIERR, err=%d.\n",
	pbm->name, err);

	tmp = upa_readq(base + SABRE_PCICTRL);
	tmp \|= SABRE_PCICTRL_ERREN;
	upa_writeq(tmp, base + SABRE_PCICTRL);
	}

	static void apb_init(struct pci_bus *sabre_bus)
	{
	struct pci_dev *pdev;

	list_for_each_entry(pdev, &sabre_bus->devices, bus_list) {
	if (pdev->vendor == PCI_VENDOR_ID_SUN &&
	pdev->device == PCI_DEVICE_ID_SUN_SIMBA) {
	u16 word16;

	pci_read_config_word(pdev, PCI_COMMAND, &word16);
	word16 \|= PCI_COMMAND_SERR \| PCI_COMMAND_PARITY \|
	PCI_COMMAND_MASTER \| PCI_COMMAND_MEMORY \|
	PCI_COMMAND_IO;
	pci_write_config_word(pdev, PCI_COMMAND, word16);

	/* Status register bits are "write 1 to clear". */
	pci_write_config_word(pdev, PCI_STATUS, 0xffff);
	pci_write_config_word(pdev, PCI_SEC_STATUS, 0xffff);

	/* Use a primary/seconday latency timer value
	* of 64.
	*/
	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
	pci_write_config_byte(pdev, PCI_SEC_LATENCY_TIMER, 64);

	/* Enable reporting/forwarding of master aborts,
	* parity, and SERR.
	*/
	pci_write_config_byte(pdev, PCI_BRIDGE_CONTROL,
	(PCI_BRIDGE_CTL_PARITY \|
	PCI_BRIDGE_CTL_SERR \|
	PCI_BRIDGE_CTL_MASTER_ABORT));
	}
	}
	}

	static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm,
	struct device *parent)
	{
	static int once;

	/* The APB bridge speaks to the Sabre host PCI bridge
	* at 66Mhz, but the front side of APB runs at 33Mhz
	* for both segments.
	*
	* Hummingbird systems do not use APB, so they run
	* at 66MHZ.
	*/
	if (hummingbird_p)
	pbm->is_66mhz_capable = 1;
	else
	pbm->is_66mhz_capable = 0;

	/* This driver has not been verified to handle
	* multiple SABREs yet, so trap this.
	*
	* Also note that the SABRE host bridge is hardwired
	* to live at bus 0.
	*/
	if (once != 0) {
	printk(KERN_ERR PFX "Multiple controllers unsupported.\n");
	return;
	}
	once++;

	pbm->pci_bus = pci_scan_one_pbm(pbm, parent);
	if (!pbm->pci_bus)
	return;

	sabre_root_bus = pbm->pci_bus;

	apb_init(pbm->pci_bus);

	sabre_register_error_handlers(pbm);
	}

	static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm,
	struct platform_device *op)
	{
	psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE);
	pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR;
	pbm->pci_afar = pbm->controller_regs + SABRE_PIOAFAR;
	pbm->pci_csr = pbm->controller_regs + SABRE_PCICTRL;
	sabre_scan_bus(pbm, &op->dev);
	}

	static const struct of_device_id sabre_match[];
	static int __devinit sabre_probe(struct platform_device *op)
	{
	const struct of_device_id *match;
	const struct linux_prom64_registers *pr_regs;
	struct device_node *dp = op->dev.of_node;
	struct pci_pbm_info *pbm;
	u32 upa_portid, dma_mask;
	struct iommu *iommu;
	int tsbsize, err;
	const u32 *vdma;
	u64 clear_irq;

	match = of_match_device(sabre_match, &op->dev);
	hummingbird_p = match && (match->data != NULL);
	if (!hummingbird_p) {
	struct device_node *cpu_dp;

	/* Of course, Sun has to encode things a thousand
	* different ways, inconsistently.
	*/
	for_each_node_by_type(cpu_dp, "cpu") {
	if (!strcmp(cpu_dp->name, "SUNW,UltraSPARC-IIe"))
	hummingbird_p = 1;
	}
	}

	err = -ENOMEM;
	pbm = kzalloc(sizeof(*pbm), GFP_KERNEL);
	if (!pbm) {
	printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n");
	goto out_err;
	}

	iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
	if (!iommu) {
	printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n");
	goto out_free_controller;
	}

	pbm->iommu = iommu;

	upa_portid = of_getintprop_default(dp, "upa-portid", 0xff);

	pbm->portid = upa_portid;

	/*
	* Map in SABRE register set and report the presence of this SABRE.
	*/

	pr_regs = of_get_property(dp, "reg", NULL);
	err = -ENODEV;
	if (!pr_regs) {
	printk(KERN_ERR PFX "No reg property\n");
	goto out_free_iommu;
	}

	/*
	* First REG in property is base of entire SABRE register space.
	*/
	pbm->controller_regs = pr_regs[0].phys_addr;

	/* Clear interrupts */

	/* PCI first */
	for (clear_irq = SABRE_ICLR_A_SLOT0; clear_irq < SABRE_ICLR_B_SLOT0 + 0x80; clear_irq += 8)
	upa_writeq(0x0UL, pbm->controller_regs + clear_irq);

	/* Then OBIO */
	for (clear_irq = SABRE_ICLR_SCSI; clear_irq < SABRE_ICLR_SCSI + 0x80; clear_irq += 8)
	upa_writeq(0x0UL, pbm->controller_regs + clear_irq);

	/* Error interrupts are enabled later after the bus scan. */
	upa_writeq((SABRE_PCICTRL_MRLEN \| SABRE_PCICTRL_SERR \|
	SABRE_PCICTRL_ARBPARK \| SABRE_PCICTRL_AEN),
	pbm->controller_regs + SABRE_PCICTRL);

	/* Now map in PCI config space for entire SABRE. */
	pbm->config_space = pbm->controller_regs + SABRE_CONFIGSPACE;

	vdma = of_get_property(dp, "virtual-dma", NULL);
	if (!vdma) {
	printk(KERN_ERR PFX "No virtual-dma property\n");
	goto out_free_iommu;
	}

	dma_mask = vdma[0];
	switch(vdma[1]) {
	case 0x20000000:
	dma_mask \|= 0x1fffffff;
	tsbsize = 64;
	break;
	case 0x40000000:
	dma_mask \|= 0x3fffffff;
	tsbsize = 128;
	break;

	case 0x80000000:
	dma_mask \|= 0x7fffffff;
	tsbsize = 128;
	break;
	default:
	printk(KERN_ERR PFX "Strange virtual-dma size.\n");
	goto out_free_iommu;
	}

	err = psycho_iommu_init(pbm, tsbsize, vdma[0], dma_mask, SABRE_WRSYNC);
	if (err)
	goto out_free_iommu;

	/*
	* Look for APB underneath.
	*/
	sabre_pbm_init(pbm, op);

	pbm->next = pci_pbm_root;
	pci_pbm_root = pbm;

	dev_set_drvdata(&op->dev, pbm);

	return 0;

	out_free_iommu:
	kfree(pbm->iommu);

	out_free_controller:
	kfree(pbm);

	out_err:
	return err;
	}

	static const struct of_device_id sabre_match[] = {
	{
	.name = "pci",
	.compatible = "pci108e,a001",
	.data = (void *) 1,
	},
	{
	.name = "pci",
	.compatible = "pci108e,a000",
	},
	{},
	};

	static struct platform_driver sabre_driver = {
	.driver = {
	.name = DRIVER_NAME,
	.owner = THIS_MODULE,
	.of_match_table = sabre_match,
	},
	.probe = sabre_probe,
	};

	static int __init sabre_init(void)
	{
	return platform_driver_register(&sabre_driver);
	}

	subsys_initcall(sabre_init);