| /* |
| * DesignWare HDMI audio driver |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Written and tested against the Designware HDMI Tx found in iMX6. |
| */ |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <drm/bridge/dw_hdmi.h> |
| #include <drm/drm_edid.h> |
| |
| #include <sound/asoundef.h> |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_drm_eld.h> |
| #include <sound/pcm_iec958.h> |
| |
| #include "dw-hdmi-audio.h" |
| |
| #define DRIVER_NAME "dw-hdmi-ahb-audio" |
| |
| /* Provide some bits rather than bit offsets */ |
| enum { |
| HDMI_AHB_DMA_CONF0_SW_FIFO_RST = BIT(7), |
| HDMI_AHB_DMA_CONF0_EN_HLOCK = BIT(3), |
| HDMI_AHB_DMA_START_START = BIT(0), |
| HDMI_AHB_DMA_STOP_STOP = BIT(0), |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR = BIT(5), |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST = BIT(4), |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY = BIT(3), |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE = BIT(2), |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL = BIT(1), |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY = BIT(0), |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL = |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR | |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST | |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY | |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE | |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL | |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY, |
| HDMI_IH_AHBDMAAUD_STAT0_ERROR = BIT(5), |
| HDMI_IH_AHBDMAAUD_STAT0_LOST = BIT(4), |
| HDMI_IH_AHBDMAAUD_STAT0_RETRY = BIT(3), |
| HDMI_IH_AHBDMAAUD_STAT0_DONE = BIT(2), |
| HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL = BIT(1), |
| HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY = BIT(0), |
| HDMI_IH_AHBDMAAUD_STAT0_ALL = |
| HDMI_IH_AHBDMAAUD_STAT0_ERROR | |
| HDMI_IH_AHBDMAAUD_STAT0_LOST | |
| HDMI_IH_AHBDMAAUD_STAT0_RETRY | |
| HDMI_IH_AHBDMAAUD_STAT0_DONE | |
| HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL | |
| HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY, |
| HDMI_AHB_DMA_CONF0_INCR16 = 2 << 1, |
| HDMI_AHB_DMA_CONF0_INCR8 = 1 << 1, |
| HDMI_AHB_DMA_CONF0_INCR4 = 0, |
| HDMI_AHB_DMA_CONF0_BURST_MODE = BIT(0), |
| HDMI_AHB_DMA_MASK_DONE = BIT(7), |
| |
| HDMI_REVISION_ID = 0x0001, |
| HDMI_IH_AHBDMAAUD_STAT0 = 0x0109, |
| HDMI_IH_MUTE_AHBDMAAUD_STAT0 = 0x0189, |
| HDMI_FC_AUDICONF2 = 0x1027, |
| HDMI_FC_AUDSCONF = 0x1063, |
| HDMI_FC_AUDSCONF_LAYOUT1 = 1 << 0, |
| HDMI_FC_AUDSCONF_LAYOUT0 = 0 << 0, |
| HDMI_AHB_DMA_CONF0 = 0x3600, |
| HDMI_AHB_DMA_START = 0x3601, |
| HDMI_AHB_DMA_STOP = 0x3602, |
| HDMI_AHB_DMA_THRSLD = 0x3603, |
| HDMI_AHB_DMA_STRADDR0 = 0x3604, |
| HDMI_AHB_DMA_STPADDR0 = 0x3608, |
| HDMI_AHB_DMA_MASK = 0x3614, |
| HDMI_AHB_DMA_POL = 0x3615, |
| HDMI_AHB_DMA_CONF1 = 0x3616, |
| HDMI_AHB_DMA_BUFFPOL = 0x361a, |
| }; |
| |
| struct dw_hdmi_channel_conf { |
| u8 conf1; |
| u8 ca; |
| }; |
| |
| /* |
| * The default mapping of ALSA channels to HDMI channels and speaker |
| * allocation bits. Note that we can't do channel remapping here - |
| * channels must be in the same order. |
| * |
| * Mappings for alsa-lib pcm/surround*.conf files: |
| * |
| * Front Sur4.0 Sur4.1 Sur5.0 Sur5.1 Sur7.1 |
| * Channels 2 4 6 6 6 8 |
| * |
| * Our mapping from ALSA channel to CEA686D speaker name and HDMI channel: |
| * |
| * Number of ALSA channels |
| * ALSA Channel 2 3 4 5 6 7 8 |
| * 0 FL:0 = = = = = = |
| * 1 FR:1 = = = = = = |
| * 2 FC:3 RL:4 LFE:2 = = = |
| * 3 RR:5 RL:4 FC:3 = = |
| * 4 RR:5 RL:4 = = |
| * 5 RR:5 = = |
| * 6 RC:6 = |
| * 7 RLC/FRC RLC/FRC |
| */ |
| static struct dw_hdmi_channel_conf default_hdmi_channel_config[7] = { |
| { 0x03, 0x00 }, /* FL,FR */ |
| { 0x0b, 0x02 }, /* FL,FR,FC */ |
| { 0x33, 0x08 }, /* FL,FR,RL,RR */ |
| { 0x37, 0x09 }, /* FL,FR,LFE,RL,RR */ |
| { 0x3f, 0x0b }, /* FL,FR,LFE,FC,RL,RR */ |
| { 0x7f, 0x0f }, /* FL,FR,LFE,FC,RL,RR,RC */ |
| { 0xff, 0x13 }, /* FL,FR,LFE,FC,RL,RR,[FR]RC,[FR]LC */ |
| }; |
| |
| struct snd_dw_hdmi { |
| struct snd_card *card; |
| struct snd_pcm *pcm; |
| spinlock_t lock; |
| struct dw_hdmi_audio_data data; |
| struct snd_pcm_substream *substream; |
| void (*reformat)(struct snd_dw_hdmi *, size_t, size_t); |
| void *buf_src; |
| void *buf_dst; |
| dma_addr_t buf_addr; |
| unsigned buf_offset; |
| unsigned buf_period; |
| unsigned buf_size; |
| unsigned channels; |
| u8 revision; |
| u8 iec_offset; |
| u8 cs[192][8]; |
| }; |
| |
| static void dw_hdmi_writel(u32 val, void __iomem *ptr) |
| { |
| writeb_relaxed(val, ptr); |
| writeb_relaxed(val >> 8, ptr + 1); |
| writeb_relaxed(val >> 16, ptr + 2); |
| writeb_relaxed(val >> 24, ptr + 3); |
| } |
| |
| /* |
| * Convert to hardware format: The userspace buffer contains IEC958 samples, |
| * with the PCUV bits in bits 31..28 and audio samples in bits 27..4. We |
| * need these to be in bits 27..24, with the IEC B bit in bit 28, and audio |
| * samples in 23..0. |
| * |
| * Default preamble in bits 3..0: 8 = block start, 4 = even 2 = odd |
| * |
| * Ideally, we could do with having the data properly formatted in userspace. |
| */ |
| static void dw_hdmi_reformat_iec958(struct snd_dw_hdmi *dw, |
| size_t offset, size_t bytes) |
| { |
| u32 *src = dw->buf_src + offset; |
| u32 *dst = dw->buf_dst + offset; |
| u32 *end = dw->buf_src + offset + bytes; |
| |
| do { |
| u32 b, sample = *src++; |
| |
| b = (sample & 8) << (28 - 3); |
| |
| sample >>= 4; |
| |
| *dst++ = sample | b; |
| } while (src < end); |
| } |
| |
| static u32 parity(u32 sample) |
| { |
| sample ^= sample >> 16; |
| sample ^= sample >> 8; |
| sample ^= sample >> 4; |
| sample ^= sample >> 2; |
| sample ^= sample >> 1; |
| return (sample & 1) << 27; |
| } |
| |
| static void dw_hdmi_reformat_s24(struct snd_dw_hdmi *dw, |
| size_t offset, size_t bytes) |
| { |
| u32 *src = dw->buf_src + offset; |
| u32 *dst = dw->buf_dst + offset; |
| u32 *end = dw->buf_src + offset + bytes; |
| |
| do { |
| unsigned i; |
| u8 *cs; |
| |
| cs = dw->cs[dw->iec_offset++]; |
| if (dw->iec_offset >= 192) |
| dw->iec_offset = 0; |
| |
| i = dw->channels; |
| do { |
| u32 sample = *src++; |
| |
| sample &= ~0xff000000; |
| sample |= *cs++ << 24; |
| sample |= parity(sample & ~0xf8000000); |
| |
| *dst++ = sample; |
| } while (--i); |
| } while (src < end); |
| } |
| |
| static void dw_hdmi_create_cs(struct snd_dw_hdmi *dw, |
| struct snd_pcm_runtime *runtime) |
| { |
| u8 cs[4]; |
| unsigned ch, i, j; |
| |
| snd_pcm_create_iec958_consumer(runtime, cs, sizeof(cs)); |
| |
| memset(dw->cs, 0, sizeof(dw->cs)); |
| |
| for (ch = 0; ch < 8; ch++) { |
| cs[2] &= ~IEC958_AES2_CON_CHANNEL; |
| cs[2] |= (ch + 1) << 4; |
| |
| for (i = 0; i < ARRAY_SIZE(cs); i++) { |
| unsigned c = cs[i]; |
| |
| for (j = 0; j < 8; j++, c >>= 1) |
| dw->cs[i * 8 + j][ch] = (c & 1) << 2; |
| } |
| } |
| dw->cs[0][0] |= BIT(4); |
| } |
| |
| static void dw_hdmi_start_dma(struct snd_dw_hdmi *dw) |
| { |
| void __iomem *base = dw->data.base; |
| unsigned offset = dw->buf_offset; |
| unsigned period = dw->buf_period; |
| u32 start, stop; |
| |
| dw->reformat(dw, offset, period); |
| |
| /* Clear all irqs before enabling irqs and starting DMA */ |
| writeb_relaxed(HDMI_IH_AHBDMAAUD_STAT0_ALL, |
| base + HDMI_IH_AHBDMAAUD_STAT0); |
| |
| start = dw->buf_addr + offset; |
| stop = start + period - 1; |
| |
| /* Setup the hardware start/stop addresses */ |
| dw_hdmi_writel(start, base + HDMI_AHB_DMA_STRADDR0); |
| dw_hdmi_writel(stop, base + HDMI_AHB_DMA_STPADDR0); |
| |
| writeb_relaxed((u8)~HDMI_AHB_DMA_MASK_DONE, base + HDMI_AHB_DMA_MASK); |
| writeb(HDMI_AHB_DMA_START_START, base + HDMI_AHB_DMA_START); |
| |
| offset += period; |
| if (offset >= dw->buf_size) |
| offset = 0; |
| dw->buf_offset = offset; |
| } |
| |
| static void dw_hdmi_stop_dma(struct snd_dw_hdmi *dw) |
| { |
| /* Disable interrupts before disabling DMA */ |
| writeb_relaxed(~0, dw->data.base + HDMI_AHB_DMA_MASK); |
| writeb_relaxed(HDMI_AHB_DMA_STOP_STOP, dw->data.base + HDMI_AHB_DMA_STOP); |
| } |
| |
| static irqreturn_t snd_dw_hdmi_irq(int irq, void *data) |
| { |
| struct snd_dw_hdmi *dw = data; |
| struct snd_pcm_substream *substream; |
| unsigned stat; |
| |
| stat = readb_relaxed(dw->data.base + HDMI_IH_AHBDMAAUD_STAT0); |
| if (!stat) |
| return IRQ_NONE; |
| |
| writeb_relaxed(stat, dw->data.base + HDMI_IH_AHBDMAAUD_STAT0); |
| |
| substream = dw->substream; |
| if (stat & HDMI_IH_AHBDMAAUD_STAT0_DONE && substream) { |
| snd_pcm_period_elapsed(substream); |
| |
| spin_lock(&dw->lock); |
| if (dw->substream) |
| dw_hdmi_start_dma(dw); |
| spin_unlock(&dw->lock); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct snd_pcm_hardware dw_hdmi_hw = { |
| .info = SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_MMAP_VALID, |
| .formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE | |
| SNDRV_PCM_FMTBIT_S24_LE, |
| .rates = SNDRV_PCM_RATE_32000 | |
| SNDRV_PCM_RATE_44100 | |
| SNDRV_PCM_RATE_48000 | |
| SNDRV_PCM_RATE_88200 | |
| SNDRV_PCM_RATE_96000 | |
| SNDRV_PCM_RATE_176400 | |
| SNDRV_PCM_RATE_192000, |
| .channels_min = 2, |
| .channels_max = 8, |
| .buffer_bytes_max = 1024 * 1024, |
| .period_bytes_min = 256, |
| .period_bytes_max = 8192, /* ERR004323: must limit to 8k */ |
| .periods_min = 2, |
| .periods_max = 16, |
| .fifo_size = 0, |
| }; |
| |
| static int dw_hdmi_open(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_dw_hdmi *dw = substream->private_data; |
| void __iomem *base = dw->data.base; |
| int ret; |
| |
| runtime->hw = dw_hdmi_hw; |
| |
| ret = snd_pcm_hw_constraint_eld(runtime, dw->data.eld); |
| if (ret < 0) |
| return ret; |
| |
| ret = snd_pcm_limit_hw_rates(runtime); |
| if (ret < 0) |
| return ret; |
| |
| ret = snd_pcm_hw_constraint_integer(runtime, |
| SNDRV_PCM_HW_PARAM_PERIODS); |
| if (ret < 0) |
| return ret; |
| |
| /* Limit the buffer size to the size of the preallocated buffer */ |
| ret = snd_pcm_hw_constraint_minmax(runtime, |
| SNDRV_PCM_HW_PARAM_BUFFER_SIZE, |
| 0, substream->dma_buffer.bytes); |
| if (ret < 0) |
| return ret; |
| |
| /* Clear FIFO */ |
| writeb_relaxed(HDMI_AHB_DMA_CONF0_SW_FIFO_RST, |
| base + HDMI_AHB_DMA_CONF0); |
| |
| /* Configure interrupt polarities */ |
| writeb_relaxed(~0, base + HDMI_AHB_DMA_POL); |
| writeb_relaxed(~0, base + HDMI_AHB_DMA_BUFFPOL); |
| |
| /* Keep interrupts masked, and clear any pending */ |
| writeb_relaxed(~0, base + HDMI_AHB_DMA_MASK); |
| writeb_relaxed(~0, base + HDMI_IH_AHBDMAAUD_STAT0); |
| |
| ret = request_irq(dw->data.irq, snd_dw_hdmi_irq, IRQF_SHARED, |
| "dw-hdmi-audio", dw); |
| if (ret) |
| return ret; |
| |
| /* Un-mute done interrupt */ |
| writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL & |
| ~HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE, |
| base + HDMI_IH_MUTE_AHBDMAAUD_STAT0); |
| |
| return 0; |
| } |
| |
| static int dw_hdmi_close(struct snd_pcm_substream *substream) |
| { |
| struct snd_dw_hdmi *dw = substream->private_data; |
| |
| /* Mute all interrupts */ |
| writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL, |
| dw->data.base + HDMI_IH_MUTE_AHBDMAAUD_STAT0); |
| |
| free_irq(dw->data.irq, dw); |
| |
| return 0; |
| } |
| |
| static int dw_hdmi_hw_free(struct snd_pcm_substream *substream) |
| { |
| return snd_pcm_lib_free_vmalloc_buffer(substream); |
| } |
| |
| static int dw_hdmi_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| /* Allocate the PCM runtime buffer, which is exposed to userspace. */ |
| return snd_pcm_lib_alloc_vmalloc_buffer(substream, |
| params_buffer_bytes(params)); |
| } |
| |
| static int dw_hdmi_prepare(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_dw_hdmi *dw = substream->private_data; |
| u8 threshold, conf0, conf1, layout, ca; |
| |
| /* Setup as per 3.0.5 FSL 4.1.0 BSP */ |
| switch (dw->revision) { |
| case 0x0a: |
| conf0 = HDMI_AHB_DMA_CONF0_BURST_MODE | |
| HDMI_AHB_DMA_CONF0_INCR4; |
| if (runtime->channels == 2) |
| threshold = 126; |
| else |
| threshold = 124; |
| break; |
| case 0x1a: |
| conf0 = HDMI_AHB_DMA_CONF0_BURST_MODE | |
| HDMI_AHB_DMA_CONF0_INCR8; |
| threshold = 128; |
| break; |
| default: |
| /* NOTREACHED */ |
| return -EINVAL; |
| } |
| |
| dw_hdmi_set_sample_rate(dw->data.hdmi, runtime->rate); |
| |
| /* Minimum number of bytes in the fifo. */ |
| runtime->hw.fifo_size = threshold * 32; |
| |
| conf0 |= HDMI_AHB_DMA_CONF0_EN_HLOCK; |
| conf1 = default_hdmi_channel_config[runtime->channels - 2].conf1; |
| ca = default_hdmi_channel_config[runtime->channels - 2].ca; |
| |
| /* |
| * For >2 channel PCM audio, we need to select layout 1 |
| * and set an appropriate channel map. |
| */ |
| if (runtime->channels > 2) |
| layout = HDMI_FC_AUDSCONF_LAYOUT1; |
| else |
| layout = HDMI_FC_AUDSCONF_LAYOUT0; |
| |
| writeb_relaxed(threshold, dw->data.base + HDMI_AHB_DMA_THRSLD); |
| writeb_relaxed(conf0, dw->data.base + HDMI_AHB_DMA_CONF0); |
| writeb_relaxed(conf1, dw->data.base + HDMI_AHB_DMA_CONF1); |
| writeb_relaxed(layout, dw->data.base + HDMI_FC_AUDSCONF); |
| writeb_relaxed(ca, dw->data.base + HDMI_FC_AUDICONF2); |
| |
| switch (runtime->format) { |
| case SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE: |
| dw->reformat = dw_hdmi_reformat_iec958; |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| dw_hdmi_create_cs(dw, runtime); |
| dw->reformat = dw_hdmi_reformat_s24; |
| break; |
| } |
| dw->iec_offset = 0; |
| dw->channels = runtime->channels; |
| dw->buf_src = runtime->dma_area; |
| dw->buf_dst = substream->dma_buffer.area; |
| dw->buf_addr = substream->dma_buffer.addr; |
| dw->buf_period = snd_pcm_lib_period_bytes(substream); |
| dw->buf_size = snd_pcm_lib_buffer_bytes(substream); |
| |
| return 0; |
| } |
| |
| static int dw_hdmi_trigger(struct snd_pcm_substream *substream, int cmd) |
| { |
| struct snd_dw_hdmi *dw = substream->private_data; |
| unsigned long flags; |
| int ret = 0; |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| spin_lock_irqsave(&dw->lock, flags); |
| dw->buf_offset = 0; |
| dw->substream = substream; |
| dw_hdmi_start_dma(dw); |
| dw_hdmi_audio_enable(dw->data.hdmi); |
| spin_unlock_irqrestore(&dw->lock, flags); |
| substream->runtime->delay = substream->runtime->period_size; |
| break; |
| |
| case SNDRV_PCM_TRIGGER_STOP: |
| spin_lock_irqsave(&dw->lock, flags); |
| dw->substream = NULL; |
| dw_hdmi_stop_dma(dw); |
| dw_hdmi_audio_disable(dw->data.hdmi); |
| spin_unlock_irqrestore(&dw->lock, flags); |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static snd_pcm_uframes_t dw_hdmi_pointer(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_dw_hdmi *dw = substream->private_data; |
| |
| /* |
| * We are unable to report the exact hardware position as |
| * reading the 32-bit DMA position using 8-bit reads is racy. |
| */ |
| return bytes_to_frames(runtime, dw->buf_offset); |
| } |
| |
| static struct snd_pcm_ops snd_dw_hdmi_ops = { |
| .open = dw_hdmi_open, |
| .close = dw_hdmi_close, |
| .ioctl = snd_pcm_lib_ioctl, |
| .hw_params = dw_hdmi_hw_params, |
| .hw_free = dw_hdmi_hw_free, |
| .prepare = dw_hdmi_prepare, |
| .trigger = dw_hdmi_trigger, |
| .pointer = dw_hdmi_pointer, |
| .page = snd_pcm_lib_get_vmalloc_page, |
| }; |
| |
| static int snd_dw_hdmi_probe(struct platform_device *pdev) |
| { |
| const struct dw_hdmi_audio_data *data = pdev->dev.platform_data; |
| struct device *dev = pdev->dev.parent; |
| struct snd_dw_hdmi *dw; |
| struct snd_card *card; |
| struct snd_pcm *pcm; |
| unsigned revision; |
| int ret; |
| |
| writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL, |
| data->base + HDMI_IH_MUTE_AHBDMAAUD_STAT0); |
| revision = readb_relaxed(data->base + HDMI_REVISION_ID); |
| if (revision != 0x0a && revision != 0x1a) { |
| dev_err(dev, "dw-hdmi-audio: unknown revision 0x%02x\n", |
| revision); |
| return -ENXIO; |
| } |
| |
| ret = snd_card_new(dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, |
| THIS_MODULE, sizeof(struct snd_dw_hdmi), &card); |
| if (ret < 0) |
| return ret; |
| |
| strlcpy(card->driver, DRIVER_NAME, sizeof(card->driver)); |
| strlcpy(card->shortname, "DW-HDMI", sizeof(card->shortname)); |
| snprintf(card->longname, sizeof(card->longname), |
| "%s rev 0x%02x, irq %d", card->shortname, revision, |
| data->irq); |
| |
| dw = card->private_data; |
| dw->card = card; |
| dw->data = *data; |
| dw->revision = revision; |
| |
| spin_lock_init(&dw->lock); |
| |
| ret = snd_pcm_new(card, "DW HDMI", 0, 1, 0, &pcm); |
| if (ret < 0) |
| goto err; |
| |
| dw->pcm = pcm; |
| pcm->private_data = dw; |
| strlcpy(pcm->name, DRIVER_NAME, sizeof(pcm->name)); |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_dw_hdmi_ops); |
| |
| /* |
| * To support 8-channel 96kHz audio reliably, we need 512k |
| * to satisfy alsa with our restricted period (ERR004323). |
| */ |
| snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, |
| dev, 128 * 1024, 1024 * 1024); |
| |
| ret = snd_card_register(card); |
| if (ret < 0) |
| goto err; |
| |
| platform_set_drvdata(pdev, dw); |
| |
| return 0; |
| |
| err: |
| snd_card_free(card); |
| return ret; |
| } |
| |
| static int snd_dw_hdmi_remove(struct platform_device *pdev) |
| { |
| struct snd_dw_hdmi *dw = platform_get_drvdata(pdev); |
| |
| snd_card_free(dw->card); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_PM_SLEEP) && defined(IS_NOT_BROKEN) |
| /* |
| * This code is fine, but requires implementation in the dw_hdmi_trigger() |
| * method which is currently missing as I have no way to test this. |
| */ |
| static int snd_dw_hdmi_suspend(struct device *dev) |
| { |
| struct snd_dw_hdmi *dw = dev_get_drvdata(dev); |
| |
| snd_power_change_state(dw->card, SNDRV_CTL_POWER_D3cold); |
| snd_pcm_suspend_all(dw->pcm); |
| |
| return 0; |
| } |
| |
| static int snd_dw_hdmi_resume(struct device *dev) |
| { |
| struct snd_dw_hdmi *dw = dev_get_drvdata(dev); |
| |
| snd_power_change_state(dw->card, SNDRV_CTL_POWER_D0); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(snd_dw_hdmi_pm, snd_dw_hdmi_suspend, |
| snd_dw_hdmi_resume); |
| #define PM_OPS &snd_dw_hdmi_pm |
| #else |
| #define PM_OPS NULL |
| #endif |
| |
| static struct platform_driver snd_dw_hdmi_driver = { |
| .probe = snd_dw_hdmi_probe, |
| .remove = snd_dw_hdmi_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| .pm = PM_OPS, |
| }, |
| }; |
| |
| module_platform_driver(snd_dw_hdmi_driver); |
| |
| MODULE_AUTHOR("Russell King <rmk+kernel@arm.linux.org.uk>"); |
| MODULE_DESCRIPTION("Synopsis Designware HDMI AHB ALSA interface"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |