V4L/DVB (7655): tda10086 coding stlye fixes
This patch replaces the c++ style comments.
No functional changes
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c
index acf1471..a17ce3c 100644
--- a/drivers/media/dvb/frontends/tda10086.c
+++ b/drivers/media/dvb/frontends/tda10086.c
@@ -90,16 +90,16 @@
{
int val;
- // read a byte and check
+ /* read a byte and check */
val = tda10086_read_byte(state, reg);
if (val < 0)
return val;
- // mask if off
+ /* mask if off */
val = val & ~mask;
val |= data & 0xff;
- // write it out again
+ /* write it out again */
return tda10086_write_byte(state, reg, val);
}
@@ -112,63 +112,63 @@
if (state->config->diseqc_tone)
t22k_off = 0;
- // reset
+ /* reset */
tda10086_write_byte(state, 0x00, 0x00);
msleep(10);
- // misc setup
+ /* misc setup */
tda10086_write_byte(state, 0x01, 0x94);
- tda10086_write_byte(state, 0x02, 0x35); // NOTE: TT drivers appear to disable CSWP
+ tda10086_write_byte(state, 0x02, 0x35); /* NOTE: TT drivers appear to disable CSWP */
tda10086_write_byte(state, 0x03, 0xe4);
tda10086_write_byte(state, 0x04, 0x43);
tda10086_write_byte(state, 0x0c, 0x0c);
- tda10086_write_byte(state, 0x1b, 0xb0); // noise threshold
- tda10086_write_byte(state, 0x20, 0x89); // misc
- tda10086_write_byte(state, 0x30, 0x04); // acquisition period length
- tda10086_write_byte(state, 0x32, 0x00); // irq off
- tda10086_write_byte(state, 0x31, 0x56); // setup AFC
+ tda10086_write_byte(state, 0x1b, 0xb0); /* noise threshold */
+ tda10086_write_byte(state, 0x20, 0x89); /* misc */
+ tda10086_write_byte(state, 0x30, 0x04); /* acquisition period length */
+ tda10086_write_byte(state, 0x32, 0x00); /* irq off */
+ tda10086_write_byte(state, 0x31, 0x56); /* setup AFC */
- // setup PLL (this assumes SACLK = 96MHz)
- tda10086_write_byte(state, 0x55, 0x2c); // misc PLL setup
+ /* setup PLL (this assumes SACLK = 96MHz) */
+ tda10086_write_byte(state, 0x55, 0x2c); /* misc PLL setup */
if (state->config->xtal_freq == TDA10086_XTAL_16M) {
- tda10086_write_byte(state, 0x3a, 0x0b); // M=12
- tda10086_write_byte(state, 0x3b, 0x01); // P=2
+ tda10086_write_byte(state, 0x3a, 0x0b); /* M=12 */
+ tda10086_write_byte(state, 0x3b, 0x01); /* P=2 */
} else {
- tda10086_write_byte(state, 0x3a, 0x17); // M=24
- tda10086_write_byte(state, 0x3b, 0x00); // P=1
+ tda10086_write_byte(state, 0x3a, 0x17); /* M=24 */
+ tda10086_write_byte(state, 0x3b, 0x00); /* P=1 */
}
- tda10086_write_mask(state, 0x55, 0x20, 0x00); // powerup PLL
+ tda10086_write_mask(state, 0x55, 0x20, 0x00); /* powerup PLL */
- // setup TS interface
+ /* setup TS interface */
tda10086_write_byte(state, 0x11, 0x81);
tda10086_write_byte(state, 0x12, 0x81);
- tda10086_write_byte(state, 0x19, 0x40); // parallel mode A + MSBFIRST
- tda10086_write_byte(state, 0x56, 0x80); // powerdown WPLL - unused in the mode we use
- tda10086_write_byte(state, 0x57, 0x08); // bypass WPLL - unused in the mode we use
+ tda10086_write_byte(state, 0x19, 0x40); /* parallel mode A + MSBFIRST */
+ tda10086_write_byte(state, 0x56, 0x80); /* powerdown WPLL - unused in the mode we use */
+ tda10086_write_byte(state, 0x57, 0x08); /* bypass WPLL - unused in the mode we use */
tda10086_write_byte(state, 0x10, 0x2a);
- // setup ADC
- tda10086_write_byte(state, 0x58, 0x61); // ADC setup
- tda10086_write_mask(state, 0x58, 0x01, 0x00); // powerup ADC
+ /* setup ADC */
+ tda10086_write_byte(state, 0x58, 0x61); /* ADC setup */
+ tda10086_write_mask(state, 0x58, 0x01, 0x00); /* powerup ADC */
- // setup AGC
+ /* setup AGC */
tda10086_write_byte(state, 0x05, 0x0B);
tda10086_write_byte(state, 0x37, 0x63);
- tda10086_write_byte(state, 0x3f, 0x0a); // NOTE: flydvb varies it
+ tda10086_write_byte(state, 0x3f, 0x0a); /* NOTE: flydvb varies it */
tda10086_write_byte(state, 0x40, 0x64);
tda10086_write_byte(state, 0x41, 0x4f);
tda10086_write_byte(state, 0x42, 0x43);
- // setup viterbi
- tda10086_write_byte(state, 0x1a, 0x11); // VBER 10^6, DVB, QPSK
+ /* setup viterbi */
+ tda10086_write_byte(state, 0x1a, 0x11); /* VBER 10^6, DVB, QPSK */
- // setup carrier recovery
+ /* setup carrier recovery */
tda10086_write_byte(state, 0x3d, 0x80);
- // setup SEC
- tda10086_write_byte(state, 0x36, t22k_off); // all SEC off, 22k tone
- tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000))); // } tone frequency
- tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8); // }
+ /* setup SEC */
+ tda10086_write_byte(state, 0x36, t22k_off); /* all SEC off, 22k tone */
+ tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000)));
+ tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8);
return 0;
}
@@ -307,7 +307,7 @@
dprintk ("%s %i\n", __func__, symbol_rate);
- // setup the decimation and anti-aliasing filters..
+ /* setup the decimation and anti-aliasing filters.. */
if (symbol_rate < (u32) (SACLK * 0.0137)) {
dfn=4;
afs=1;
@@ -344,13 +344,13 @@
byp=1;
}
- // calculate BDR
+ /* calculate BDR */
big = (1ULL<<21) * ((u64) symbol_rate/1000ULL) * (1ULL<<dfn);
big += ((SACLK/1000ULL)-1ULL);
do_div(big, (SACLK/1000ULL));
bdr = big & 0xfffff;
- // calculate BDRI
+ /* calculate BDRI */
tmp = (1<<dfn)*(symbol_rate/1000);
bdri = ((32 * (SACLK/1000)) + (tmp-1)) / tmp;
@@ -419,11 +419,11 @@
dprintk ("%s\n", __func__);
- // modify parameters for tuning
+ /* modify parameters for tuning */
tda10086_write_byte(state, 0x02, 0x35);
state->has_lock = false;
- // set params
+ /* set params */
if (fe->ops.tuner_ops.set_params) {
fe->ops.tuner_ops.set_params(fe, fe_params);
if (fe->ops.i2c_gate_ctrl)
@@ -435,7 +435,7 @@
fe->ops.i2c_gate_ctrl(fe, 0);
}
- // calcluate the frequency offset (in *Hz* not kHz)
+ /* calcluate the frequency offset (in *Hz* not kHz) */
freqoff = fe_params->frequency - freq;
freqoff = ((1<<16) * freqoff) / (SACLK/1000);
tda10086_write_byte(state, 0x3d, 0x80 | ((freqoff >> 8) & 0x7f));
@@ -448,7 +448,7 @@
if ((ret = tda10086_set_fec(state, fe_params)) < 0)
return ret;
- // soft reset + disable TS output until lock
+ /* soft reset + disable TS output until lock */
tda10086_write_mask(state, 0x10, 0x40, 0x40);
tda10086_write_mask(state, 0x00, 0x01, 0x00);
@@ -466,11 +466,11 @@
dprintk ("%s\n", __func__);
- // check for invalid symbol rate
+ /* check for invalid symbol rate */
if (fe_params->u.qpsk.symbol_rate < 500000)
return -EINVAL;
- // calculate the updated frequency (note: we convert from Hz->kHz)
+ /* calculate the updated frequency (note: we convert from Hz->kHz) */
tmp64 = tda10086_read_byte(state, 0x52);
tmp64 |= (tda10086_read_byte(state, 0x51) << 8);
if (tmp64 & 0x8000)
@@ -479,7 +479,7 @@
do_div(tmp64, (1ULL<<15) * (1ULL<<1));
fe_params->frequency = (int) state->frequency + (int) tmp64;
- // the inversion
+ /* the inversion */
val = tda10086_read_byte(state, 0x0c);
if (val & 0x80) {
switch(val & 0x40) {
@@ -510,7 +510,7 @@
}
}
- // calculate the updated symbol rate
+ /* calculate the updated symbol rate */
tmp = tda10086_read_byte(state, 0x1d);
if (tmp & 0x80)
tmp |= 0xffffff00;
@@ -518,7 +518,7 @@
tmp = ((state->symbol_rate/1000) * tmp) / (1000000/1000);
fe_params->u.qpsk.symbol_rate = state->symbol_rate + tmp;
- // the FEC
+ /* the FEC */
val = (tda10086_read_byte(state, 0x0d) & 0x70) >> 4;
switch(val) {
case 0x00:
@@ -571,7 +571,7 @@
*fe_status |= FE_HAS_LOCK;
if (!state->has_lock) {
state->has_lock = true;
- // modify parameters for stable reception
+ /* modify parameters for stable reception */
tda10086_write_byte(state, 0x02, 0x00);
}
}
@@ -611,10 +611,10 @@
dprintk ("%s\n", __func__);
- // read it
+ /* read it */
*ucblocks = tda10086_read_byte(state, 0x18) & 0x7f;
- // reset counter
+ /* reset counter */
tda10086_write_byte(state, 0x18, 0x00);
tda10086_write_byte(state, 0x18, 0x80);
@@ -627,7 +627,7 @@
dprintk ("%s\n", __func__);
- // read it
+ /* read it */
*ber = 0;
*ber |= tda10086_read_byte(state, 0x15);
*ber |= tda10086_read_byte(state, 0x16) << 8;