diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index a76bc48..98766f2 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -38,8 +38,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/input/mt.h>
 #include <linux/input/touchscreen.h>
-
-#define MAX_SUPPORT_POINTS		5
+#include <linux/of_device.h>
 
 #define WORK_REGISTER_THRESHOLD		0x00
 #define WORK_REGISTER_REPORT_RATE	0x08
@@ -105,6 +104,7 @@
 	int gain;
 	int offset;
 	int report_rate;
+	int max_support_points;
 
 	char name[EDT_NAME_LEN];
 
@@ -112,6 +112,10 @@
 	enum edt_ver version;
 };
 
+struct edt_i2c_chip_data {
+	int  max_support_points;
+};
+
 static int edt_ft5x06_ts_readwrite(struct i2c_client *client,
 				   u16 wr_len, u8 *wr_buf,
 				   u16 rd_len, u8 *rd_buf)
@@ -193,7 +197,7 @@
 	}
 
 	memset(rdbuf, 0, sizeof(rdbuf));
-	datalen = tplen * MAX_SUPPORT_POINTS + offset + crclen;
+	datalen = tplen * tsdata->max_support_points + offset + crclen;
 
 	error = edt_ft5x06_ts_readwrite(tsdata->client,
 					sizeof(cmd), &cmd,
@@ -218,7 +222,7 @@
 			goto out;
 	}
 
-	for (i = 0; i < MAX_SUPPORT_POINTS; i++) {
+	for (i = 0; i < tsdata->max_support_points; i++) {
 		u8 *buf = &rdbuf[i * tplen + offset];
 		bool down;
 
@@ -874,6 +878,7 @@
 static int edt_ft5x06_ts_probe(struct i2c_client *client,
 					 const struct i2c_device_id *id)
 {
+	const struct edt_i2c_chip_data *chip_data;
 	struct edt_ft5x06_ts_data *tsdata;
 	struct input_dev *input;
 	unsigned long irq_flags;
@@ -888,6 +893,16 @@
 		return -ENOMEM;
 	}
 
+	chip_data = of_device_get_match_data(&client->dev);
+	if (!chip_data)
+		chip_data = (const struct edt_i2c_chip_data *)id->driver_data;
+	if (!chip_data || !chip_data->max_support_points) {
+		dev_err(&client->dev, "invalid or missing chip data\n");
+		return -EINVAL;
+	}
+
+	tsdata->max_support_points = chip_data->max_support_points;
+
 	tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev,
 						     "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(tsdata->reset_gpio)) {
@@ -953,7 +968,8 @@
 
 	touchscreen_parse_properties(input, true);
 
-	error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, INPUT_MT_DIRECT);
+	error = input_mt_init_slots(input, tsdata->max_support_points,
+				INPUT_MT_DIRECT);
 	if (error) {
 		dev_err(&client->dev, "Unable to init MT slots.\n");
 		return error;
@@ -1032,17 +1048,21 @@
 static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
 			 edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
 
+static const struct edt_i2c_chip_data edt_ft5x06_data = {
+	.max_support_points = 5,
+};
+
 static const struct i2c_device_id edt_ft5x06_ts_id[] = {
-	{ "edt-ft5x06", 0, },
+	{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id edt_ft5x06_of_match[] = {
-	{ .compatible = "edt,edt-ft5206", },
-	{ .compatible = "edt,edt-ft5306", },
-	{ .compatible = "edt,edt-ft5406", },
+	{ .compatible = "edt,edt-ft5206", .data = &edt_ft5x06_data },
+	{ .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data },
+	{ .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match);