diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 870cb1a..e63d5e2 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -30,7 +30,6 @@
 ALC260
 ======
   fujitsu	Fujitsu S7020
-  favorit100	Maxdata Favorit 100XS
   basic		fixed pin assignment (old default model)
   test		for testing/debugging purpose, almost all controls can
 		adjusted.  Appearing only when compiled with
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c
index 55da43d..94e7a27 100644
--- a/sound/pci/hda/alc260_quirks.c
+++ b/sound/pci/hda/alc260_quirks.c
@@ -8,7 +8,6 @@
 	ALC260_AUTO,
 	ALC260_BASIC,
 	ALC260_FUJITSU_S702X,
-	ALC260_FAVORIT100,
 #ifdef CONFIG_SND_DEBUG
 	ALC260_TEST,
 #endif
@@ -103,25 +102,6 @@
 	},
 };
 
-/* Maxdata Favorit 100XS */
-static const struct hda_input_mux alc260_favorit100_capture_sources[2] = {
-	{
-		.num_items = 2,
-		.items = {
-			{ "Line/Mic", 0x0 },
-			{ "CD", 0x4 },
-		},
-	},
-	{
-		.num_items = 3,
-		.items = {
-			{ "Line/Mic", 0x0 },
-			{ "CD", 0x4 },
-			{ "Mixer", 0x5 },
-		},
-	},
-};
-
 /*
  * This is just place-holder, so there's something for alc_build_pcms to look
  * at when it calculates the maximum number of channels. ALC260 has no mixer
@@ -179,18 +159,6 @@
 	{ } /* end */
 };
 
-/* Maxdata Favorit 100XS: one output and one input (0x12) jack
- */
-static const struct snd_kcontrol_new alc260_favorit100_mixer[] = {
-	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
-	ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
-	HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
-	ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
-	{ } /* end */
-};
-
 /*
  * initialization verbs
  */
@@ -340,89 +308,6 @@
 	{ }
 };
 
-/* Initialisation sequence for Maxdata Favorit 100XS
- * (adapted from Acer init verbs).
- */
-static const struct hda_verb alc260_favorit100_init_verbs[] = {
-	/* GPIO 0 enables the output jack.
-	 * Turn this on and rely on the standard mute
-	 * methods whenever the user wants to turn these outputs off.
-	 */
-	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
-	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
-	{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
-	/* Line/Mic input jack is connected to Mic1 pin */
-	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
-	/* Ensure all other unused pins are disabled and muted. */
-	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	/* Disable digital (SPDIF) pins */
-	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
-	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
-	/* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
-	 * bus when acting as outputs.
-	 */
-	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
-	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-
-	/* Start with output sum widgets muted and their output gains at min */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
-	/* Unmute Line-out pin widget amp left and right
-	 * (no equiv mixer ctrl)
-	 */
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Unmute Mic1 and Line1 pin widget input buffers since they start as
-	 * inputs. If the pin mode is changed by the user the pin mode control
-	 * will take care of enabling the pin's input/output buffers as needed.
-	 * Therefore there's no need to enable the input buffer at this
-	 * stage.
-	 */
-	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
-	/* Mute capture amp left and right */
-	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	/* Set ADC connection select to match default mixer setting - mic
-	 * (on mic1 pin)
-	 */
-	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Do similar with the second ADC: mute capture input amp and
-	 * set ADC connection to mic to match ALSA's default state.
-	 */
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Mute all inputs to mixer widget (even unconnected ones) */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
-	{ }
-};
-
 static const struct hda_verb alc260_hp_dc7600_verbs[] = {
 	{0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
 	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
@@ -631,7 +516,6 @@
 static const char * const alc260_models[ALC260_MODEL_LAST] = {
 	[ALC260_BASIC]		= "basic",
 	[ALC260_FUJITSU_S702X]	= "fujitsu",
-	[ALC260_FAVORIT100]	= "favorit100",
 #ifdef CONFIG_SND_DEBUG
 	[ALC260_TEST]		= "test",
 #endif
@@ -639,7 +523,6 @@
 };
 
 static const struct snd_pci_quirk alc260_cfg_tbl[] = {
-	SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
 	SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
 	SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
 	SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
@@ -673,18 +556,6 @@
 		.num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources),
 		.input_mux = alc260_fujitsu_capture_sources,
 	},
-	[ALC260_FAVORIT100] = {
-		.mixers = { alc260_favorit100_mixer },
-		.init_verbs = { alc260_favorit100_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
-		.dac_nids = alc260_dac_nids,
-		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
-		.adc_nids = alc260_dual_adc_nids,
-		.num_channel_mode = ARRAY_SIZE(alc260_modes),
-		.channel_mode = alc260_modes,
-		.num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources),
-		.input_mux = alc260_favorit100_capture_sources,
-	},
 #ifdef CONFIG_SND_DEBUG
 	[ALC260_TEST] = {
 		.mixers = { alc260_test_mixer },
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index db1d8c8..0d81eeb 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4300,6 +4300,7 @@
 	SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_FIXUP_GPIO1),
 	SND_PCI_QUIRK(0x103c, 0x280a, "HP dc5750", ALC260_FIXUP_HP_DC5750),
 	SND_PCI_QUIRK(0x103c, 0x30ba, "HP Presario B1900", ALC260_FIXUP_HP_B1900),
+	SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FIXUP_GPIO1),
 	SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_FIXUP_REPLACER),
 	SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_FIXUP_COEF),
 	{}