[ARM] 3098/1: pxa2xx disable ssp irq
Patch from Liam Girdwood
This patch allows users of the pxa SSP driver to register their own irq
handlers instead of using the default SSP handler. It also cleans up the
CKEN clock and irq detection as the values are now stored in a table.
This patch replaces 2845/1
Changes:-
o Added flags parameter to ssp_init()
o Added SSP_NO_IRQ flag to disable registering of ssp irq handler (for
drivers that want to register their own handler)
o Cleaned up clock and irq detection, values are now stored in table.
o Added build changes to allow other drivers (e.g audio) to select the
ssp driver.
o corgi_ssp.c changed to use new interface.
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index b380a438..e201aa9 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -60,6 +60,7 @@
bool "Enable Sharp SL-C700 (Corgi) Support"
depends PXA_SHARPSL_25x
select PXA_SHARP_C7xx
+ select PXA_SSP
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
@@ -102,12 +103,18 @@
config PXA_SHARP_C7xx
bool
+ select PXA_SSP
help
Enable support for all Sharp C7xx models
config PXA_SHARP_Cxx00
bool
+ select PXA_SSP
help
Enable common support for Sharp Cxx00 models
+config PXA_SSP
+ tristate
+ help
+ Enable support for PXA2xx SSP ports
endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 8bc72d0..d210bd5 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -11,8 +11,8 @@
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
-obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o
-obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o
+obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o
+obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
@@ -26,6 +26,7 @@
# Misc features
obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PXA_SSP) += ssp.o
ifeq ($(CONFIG_PXA27x),y)
obj-$(CONFIG_PM) += standby.o
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 591e5f3..bdf10cf 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -203,7 +203,7 @@
GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846); /* output */
GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
- ret = ssp_init(&corgi_ssp_dev,ssp_machinfo->port);
+ ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
if (ret)
printk(KERN_ERR "Unable to register SSP handler!\n");
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 4d826c0..a68b30e 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -19,6 +19,8 @@
* 22nd Aug 2003 Initial version.
* 20th Dec 2004 Added ssp_config for changing port config without
* closing the port.
+ * 4th Aug 2005 Added option to disable irq handler registration and
+ * cleaned up irq and clock detection.
*/
#include <linux/module.h>
@@ -37,6 +39,26 @@
#define PXA_SSP_PORTS 3
+struct ssp_info_ {
+ int irq;
+ u32 clock;
+};
+
+/*
+ * SSP port clock and IRQ settings
+ */
+static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = {
+#if defined (CONFIG_PXA27x)
+ {IRQ_SSP, CKEN23_SSP1},
+ {IRQ_SSP2, CKEN3_SSP2},
+ {IRQ_SSP3, CKEN4_SSP3},
+#else
+ {IRQ_SSP, CKEN3_SSP},
+ {IRQ_NSSP, CKEN9_NSSP},
+ {IRQ_ASSP, CKEN10_ASSP},
+#endif
+};
+
static DECLARE_MUTEX(sem);
static int use_count[PXA_SSP_PORTS] = {0, 0, 0};
@@ -210,9 +232,9 @@
* %-EBUSY if the resources are already in use
* %0 on success
*/
-int ssp_init(struct ssp_dev *dev, u32 port)
+int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
{
- int ret, irq;
+ int ret;
if (port > PXA_SSP_PORTS || port == 0)
return -ENODEV;
@@ -229,61 +251,20 @@
up(&sem);
return -EBUSY;
}
-
- switch (port) {
- case 1:
- irq = IRQ_SSP;
- break;
-#if defined (CONFIG_PXA27x)
- case 2:
- irq = IRQ_SSP2;
- break;
- case 3:
- irq = IRQ_SSP3;
- break;
-#else
- case 2:
- irq = IRQ_NSSP;
- break;
- case 3:
- irq = IRQ_ASSP;
- break;
-#endif
- default:
- return -ENODEV;
- }
-
dev->port = port;
- ret = request_irq(irq, ssp_interrupt, 0, "SSP", dev);
- if (ret)
- goto out_region;
+ /* do we need to get irq */
+ if (!(init_flags & SSP_NO_IRQ)) {
+ ret = request_irq(ssp_info[port-1].irq, ssp_interrupt,
+ 0, "SSP", dev);
+ if (ret)
+ goto out_region;
+ dev->irq = ssp_info[port-1].irq;
+ } else
+ dev->irq = 0;
/* turn on SSP port clock */
- switch (dev->port) {
-#if defined (CONFIG_PXA27x)
- case 1:
- pxa_set_cken(CKEN23_SSP1, 1);
- break;
- case 2:
- pxa_set_cken(CKEN3_SSP2, 1);
- break;
- case 3:
- pxa_set_cken(CKEN4_SSP3, 1);
- break;
-#else
- case 1:
- pxa_set_cken(CKEN3_SSP, 1);
- break;
- case 2:
- pxa_set_cken(CKEN9_NSSP, 1);
- break;
- case 3:
- pxa_set_cken(CKEN10_ASSP, 1);
- break;
-#endif
- }
-
+ pxa_set_cken(ssp_info[port-1].clock, 1);
up(&sem);
return 0;
@@ -301,46 +282,17 @@
*/
void ssp_exit(struct ssp_dev *dev)
{
- int irq;
-
down(&sem);
SSCR0_P(dev->port) &= ~SSCR0_SSE;
- /* find irq, save power and turn off SSP port clock */
- switch (dev->port) {
-#if defined (CONFIG_PXA27x)
- case 1:
- irq = IRQ_SSP;
- pxa_set_cken(CKEN23_SSP1, 0);
- break;
- case 2:
- irq = IRQ_SSP2;
- pxa_set_cken(CKEN3_SSP2, 0);
- break;
- case 3:
- irq = IRQ_SSP3;
- pxa_set_cken(CKEN4_SSP3, 0);
- break;
-#else
- case 1:
- irq = IRQ_SSP;
- pxa_set_cken(CKEN3_SSP, 0);
- break;
- case 2:
- irq = IRQ_NSSP;
- pxa_set_cken(CKEN9_NSSP, 0);
- break;
- case 3:
- irq = IRQ_ASSP;
- pxa_set_cken(CKEN10_ASSP, 0);
- break;
-#endif
- default:
- printk(KERN_WARNING "SSP: tried to close invalid port\n");
- return;
+ if (dev->port > PXA_SSP_PORTS || dev->port == 0) {
+ printk(KERN_WARNING "SSP: tried to close invalid port\n");
+ return;
}
- free_irq(irq, dev);
+ pxa_set_cken(ssp_info[dev->port-1].clock, 0);
+ if (dev->irq)
+ free_irq(dev->irq, dev);
release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c);
use_count[dev->port - 1]--;
up(&sem);
diff --git a/include/asm-arm/arch-pxa/ssp.h b/include/asm-arm/arch-pxa/ssp.h
index 6ec67b0..949878c 100644
--- a/include/asm-arm/arch-pxa/ssp.h
+++ b/include/asm-arm/arch-pxa/ssp.h
@@ -18,6 +18,11 @@
#ifndef SSP_H
#define SSP_H
+/*
+ * SSP initialisation flags
+ */
+#define SSP_NO_IRQ 0x1 /* don't register an irq handler in SSP driver */
+
struct ssp_state {
u32 cr0;
u32 cr1;
@@ -31,6 +36,7 @@
u32 flags;
u32 psp_flags;
u32 speed;
+ int irq;
};
int ssp_write_word(struct ssp_dev *dev, u32 data);
@@ -40,7 +46,7 @@
void ssp_disable(struct ssp_dev *dev);
void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp);
void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
-int ssp_init(struct ssp_dev *dev, u32 port);
+int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
void ssp_exit(struct ssp_dev *dev);