[MIPS] Remove mips_machtype for LASAT machines

This is the LASAT part of the mips_machtype removal.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index a56c150..d1ac7a2 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -22,8 +22,8 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/bootinfo.h>
 #include <asm/irq_cpu.h>
+#include <asm/lasat/lasat.h>
 #include <asm/lasat/lasatint.h>
 
 #include <irq.h>
@@ -112,23 +112,18 @@
 {
 	int i;
 
-	switch (mips_machtype) {
-	case MACH_LASAT_100:
-		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
-		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
-		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
-		get_int_status = get_int_status_100;
-		*lasat_int_mask = 0;
-		break;
-	case MACH_LASAT_200:
+	if (IS_LASAT_200()) {
 		lasat_int_status = (void *)LASAT_INT_STATUS_REG_200;
 		lasat_int_mask = (void *)LASAT_INT_MASK_REG_200;
 		lasat_int_mask_shift = LASATINT_MASK_SHIFT_200;
 		get_int_status = get_int_status_200;
 		*lasat_int_mask &= 0xffff;
-		break;
-	default:
-		panic("arch_init_irq: mips_machtype incorrect");
+	} else {
+		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
+		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
+		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
+		get_int_status = get_int_status_100;
+		*lasat_int_mask = 0;
 	}
 
 	mips_cpu_irq_init();
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
index 31e328b..577bb46 100644
--- a/arch/mips/lasat/lasat_board.c
+++ b/arch/mips/lasat/lasat_board.c
@@ -24,7 +24,6 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/mutex.h>
-#include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 #include "at93c.h"
 /* New model description table */
@@ -66,7 +65,7 @@
 	ls[LASAT_MTD_SERVICE] = 0xC0000;
 	ls[LASAT_MTD_NORMAL] = 0x100000;
 
-	if (mips_machtype == MACH_LASAT_100) {
+	if (!IS_LASAT_200()) {
 		lasat_board_info.li_flash_base = 0x1e000000;
 
 		lb[LASAT_MTD_BOOTLOADER] = 0x1e400000;
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
index 209edcc..6acc6cb 100644
--- a/arch/mips/lasat/prom.c
+++ b/arch/mips/lasat/prom.c
@@ -86,18 +86,16 @@
 
 	setup_prom_vectors();
 
-	if (current_cpu_data.cputype == CPU_R5000) {
+	if (IS_LASAT_200()) {
 		printk(KERN_INFO "LASAT 200 board\n");
-		mips_machtype = MACH_LASAT_200;
 		lasat_ndelay_divider = LASAT_200_DIVIDER;
+		at93c = &at93c_defs[1];
 	} else {
 		printk(KERN_INFO "LASAT 100 board\n");
-		mips_machtype = MACH_LASAT_100;
 		lasat_ndelay_divider = LASAT_100_DIVIDER;
+		at93c = &at93c_defs[0];
 	}
 
-	at93c = &at93c_defs[mips_machtype];
-
 	lasat_init_board_info();		/* Read info from EEPROM */
 
 	/* Get the command line */
diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c
index 205bd39..5bcb6e8 100644
--- a/arch/mips/lasat/serial.c
+++ b/arch/mips/lasat/serial.c
@@ -23,7 +23,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/bootinfo.h>
 #include <asm/lasat/lasat.h>
 #include <asm/lasat/serial.h>
 
@@ -47,7 +46,7 @@
 	if (!pdev)
 		return -ENOMEM;
 
-	if (mips_machtype == MACH_LASAT_100) {
+	if (!IS_LASAT_200()) {
 		lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100);
 		lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1;
 		lasat_serial_res[0].flags = IORESOURCE_MEM;
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index e072da4..dbd3163 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -127,9 +127,11 @@
 void __init plat_mem_setup(void)
 {
 	int i;
-	lasat_misc  = &lasat_misc_info[mips_machtype];
+	int lasat_type = IS_LASAT_200() ? 1 : 0;
+
+	lasat_misc  = &lasat_misc_info[lasat_type];
 #ifdef CONFIG_PICVUE
-	picvue = &pvc_defs[mips_machtype];
+	picvue = &pvc_defs[lasat_type];
 #endif
 
 	/* Set up panic notifier */
@@ -140,7 +142,7 @@
 	lasat_reboot_setup();
 
 #ifdef CONFIG_DS1603
-	ds1603 = &ds_defs[mips_machtype];
+	ds1603 = &ds_defs[lasat_type];
 #endif
 
 #ifdef DYNAMIC_SERIAL_INIT