diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 7337005e..cffc93d 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -89,7 +89,7 @@
 16	xor1	XOR DMA 1
 17	crypto	CESA engine
 18	pex1	PCIe Cntrl 1
-19	ge1	Gigabit Ethernet 0
+19	ge1	Gigabit Ethernet 1
 20	tdm	Time Division Mplx
 
 Required properties:
diff --git a/MAINTAINERS b/MAINTAINERS
index 22b754a..f4da1b8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4231,6 +4231,7 @@
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
+F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 09238c8..c038431 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -344,10 +344,10 @@
 	select ARM_ERRATA_411920
 	select ARM_TIMER_SP804
 	select CLKDEV_LOOKUP
+	select CLKSRC_OF
 	select COMMON_CLK
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select MULTI_IRQ_HANDLER
 	select PINCTRL
 	select PINCTRL_BCM2835
@@ -642,9 +642,9 @@
 	select ARCH_HAS_CPUFREQ
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
@@ -744,7 +744,6 @@
 	select ARCH_HAS_CPUFREQ
 	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -787,7 +786,6 @@
 	select CLKSRC_MMIO
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -802,7 +800,6 @@
 	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
 	select CPU_V7
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -820,7 +817,6 @@
 	select CLKSRC_MMIO
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -838,7 +834,6 @@
 	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -873,7 +868,6 @@
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_TCM
 	select SPARSE_IRQ
 	help
@@ -957,7 +951,6 @@
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
@@ -1086,17 +1079,12 @@
 source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
-source "arch/arm/plat-s3c24xx/Kconfig"
 
 source "arch/arm/mach-socfpga/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
 source "arch/arm/mach-s3c24xx/Kconfig"
-if ARCH_S3C24XX
-source "arch/arm/mach-s3c2412/Kconfig"
-source "arch/arm/mach-s3c2440/Kconfig"
-endif
 
 if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index fc2a591..ad375a5 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -219,12 +219,12 @@
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX51.
 
-	config DEBUG_IMX50_IMX53_UART
-		bool "i.MX50 and i.MX53 Debug UART"
-		depends on SOC_IMX50 || SOC_IMX53
+	config DEBUG_IMX53_UART
+		bool "i.MX53 Debug UART"
+		depends on SOC_IMX53
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX50 or i.MX53.
+		  on i.MX53.
 
 	config DEBUG_IMX6Q_UART
 		bool "i.MX6Q Debug UART"
@@ -497,7 +497,7 @@
 				 DEBUG_IMX21_IMX27_UART || \
 				 DEBUG_IMX31_IMX35_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX50_IMX53_UART ||\
+				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4bcd2d6..1b70716 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -173,7 +173,7 @@
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_RPC)		+= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
 machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		+= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
@@ -204,7 +204,7 @@
 plat-$(CONFIG_PLAT_IOP)		+= iop
 plat-$(CONFIG_PLAT_ORION)	+= orion
 plat-$(CONFIG_PLAT_PXA)		+= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	+= s3c24xx samsung
+plat-$(CONFIG_PLAT_S3C24XX)	+= samsung
 plat-$(CONFIG_PLAT_S5P)		+= samsung
 plat-$(CONFIG_PLAT_SPEAR)	+= spear
 plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index 9deb56a..24b0475 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -13,8 +13,6 @@
 #define STATIC static
 #define STATIC_RW_DATA	/* non-static please */
 
-#define ARCH_HAS_DECOMP_WDOG
-
 /* Diagnostic functions */
 #ifdef DEBUG
 #  define Assert(cond,msg) {if(!(cond)) error(msg);}
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 45ceeb0..9353184 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,26 +1,3 @@
-config ARM_GIC
-	bool
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-
-config GIC_NON_BANKED
-	bool
-
-config ARM_VIC
-	bool
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-
-config ARM_VIC_NR
-	int
-	default 4 if ARCH_S5PV210
-	default 3 if ARCH_S5PC100
-	default 2
-	depends on ARM_VIC
-	help
-	  The maximum number of VICs available in the system, for
-	  power management.
-
 config ICST
 	bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index e8a4e58..dc8dd0d 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-$(CONFIG_ARM_GIC)		+= gic.o
-obj-$(CONFIG_ARM_VIC)		+= vic.o
 obj-$(CONFIG_ICST)		+= icst.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig
index c5212f4..36fed66b 100644
--- a/arch/arm/configs/at91sam9263_defconfig
+++ b/arch/arm/configs/at91sam9263_defconfig
@@ -18,7 +18,6 @@
 CONFIG_ARCH_AT91SAM9263=y
 CONFIG_MACH_AT91SAM9263EK=y
 CONFIG_MACH_USB_A9263=y
-CONFIG_MACH_NEOCORE926=y
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 6966713..6dddbf8 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -32,7 +32,6 @@
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_VPR200=y
 CONFIG_MACH_IMX51_DT=y
-CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 917d4fc..308ad7d 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -12,7 +12,6 @@
 
 struct tag;
 struct meminfo;
-struct sys_timer;
 struct pt_regs;
 struct smp_operations;
 #ifdef CONFIG_SMP
@@ -48,7 +47,7 @@
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_early)(void);
 	void			(*init_irq)(void);
-	struct sys_timer	*timer;		/* system tick timer	*/
+	void			(*init_time)(void);
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
 #ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index 15cb035..18c8830 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -22,6 +22,7 @@
 
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 extern void (*handle_arch_irq)(struct pt_regs *);
+extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 #endif
 
 /*
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index 6ca945f..90c12e1 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -10,36 +10,6 @@
 #ifndef __ASM_ARM_MACH_TIME_H
 #define __ASM_ARM_MACH_TIME_H
 
-/*
- * This is our kernel timer structure.
- *
- * - init
- *   Initialise the kernels jiffy timer source, claim interrupt
- *   using setup_irq.  This is called early on during initialisation
- *   while interrupts are still disabled on the local CPU.
- * - suspend
- *   Suspend the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled, after all normal devices
- *   have been suspended.  If no action is required, set this to
- *   NULL.
- * - resume
- *   Resume the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled before any normal devices
- *   are resumed.  If no action is required, set this to NULL.
- * - offset
- *   Return the timer offset in microseconds since the last timer
- *   interrupt.  Note: this must take account of any unprocessed
- *   timer interrupt which may be pending.
- */
-struct sys_timer {
-	void			(*init)(void);
-	void			(*suspend)(void);
-	void			(*resume)(void);
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-	unsigned long		(*offset)(void);
-#endif
-};
-
 extern void timer_tick(void);
 
 struct timespec;
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
index 0c4e17d..c6f294c 100644
--- a/arch/arm/include/debug/imx.S
+++ b/arch/arm/include/debug/imx.S
@@ -34,7 +34,7 @@
 #define UART_PADDR	0x43f90000
 #elif defined (CONFIG_DEBUG_IMX51_UART)
 #define UART_PADDR	0x73fbc000
-#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
+#elif defined (CONFIG_DEBUG_IMX53_UART)
 #define UART_PADDR	0x53fbc000
 #elif defined (CONFIG_DEBUG_IMX6Q_UART)
 #define UART_PADDR	IMX6Q_DEBUG_UART_BASE
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 8961650..8e4ef4c 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -117,6 +117,16 @@
 	machine_desc->init_irq();
 }
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+	if (handle_arch_irq)
+		return;
+
+	handle_arch_irq = handle_irq;
+}
+#endif
+
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 365c8d9..60340fa 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -401,7 +401,8 @@
 
 void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
 {
-	smp_cross_call = fn;
+	if (!smp_cross_call)
+		smp_cross_call = fn;
 }
 
 void arch_send_call_function_ipi_mask(const struct cpumask *mask)
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index ae0c7bb..c092115 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -24,7 +24,6 @@
 
 #include <asm/smp_twd.h>
 #include <asm/localtimer.h>
-#include <asm/hardware/gic.h>
 
 /* set up by the platform code */
 static void __iomem *twd_base;
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 09be0c3..955d92d 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -21,7 +21,6 @@
 #include <linux/timex.h>
 #include <linux/errno.h>
 #include <linux/profile.h>
-#include <linux/syscore_ops.h>
 #include <linux/timer.h>
 #include <linux/irq.h>
 
@@ -31,11 +30,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-/*
- * Our system timer.
- */
-static struct sys_timer *system_timer;
-
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
     defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
 /* this needs a better home */
@@ -69,16 +63,6 @@
 EXPORT_SYMBOL(profile_pc);
 #endif
 
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-u32 arch_gettimeoffset(void)
-{
-	if (system_timer->offset != NULL)
-		return system_timer->offset() * 1000;
-
-	return 0;
-}
-#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * Kernel system timer support.
@@ -129,43 +113,8 @@
 	return -EINVAL;
 }
 
-#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
-static int timer_suspend(void)
-{
-	if (system_timer->suspend)
-		system_timer->suspend();
-
-	return 0;
-}
-
-static void timer_resume(void)
-{
-	if (system_timer->resume)
-		system_timer->resume();
-}
-#else
-#define timer_suspend NULL
-#define timer_resume NULL
-#endif
-
-static struct syscore_ops timer_syscore_ops = {
-	.suspend	= timer_suspend,
-	.resume		= timer_resume,
-};
-
-static int __init timer_init_syscore_ops(void)
-{
-	register_syscore_ops(&timer_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(timer_init_syscore_ops);
-
 void __init time_init(void)
 {
-	system_timer = machine_desc->timer;
-	system_timer->init();
+	machine_desc->init_time();
 	sched_clock_postinit();
 }
-
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 958358c..6071f4c 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -352,12 +352,6 @@
 	  Select this if you are using a Calao Systems USB-A9263.
 	  <http://www.calao-systems.com>
 
-config MACH_NEOCORE926
-	bool "Adeneo NEOCORE926"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using the Adeneo Neocore 926 board.
-
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index b38a1dc..39218ca 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -66,7 +66,6 @@
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
 obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a926x.o
-obj-$(CONFIG_MACH_NEOCORE926)	+= board-neocore926.o
 
 # AT91SAM9RL board-specific support
 obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index cafe988..2acdff4 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -174,7 +174,6 @@
 static struct clock_event_device clkevt = {
 	.name		= "at91_tick",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 150,
 	.set_next_event	= clkevt32k_next_event,
 	.set_mode	= clkevt32k_mode,
@@ -265,17 +264,10 @@
 	at91_st_write(AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
-	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
-	clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
-	clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
 	clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&clkevt);
+	clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+					2, AT91_ST_ALMV);
 
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
 }
-
-struct sys_timer at91rm9200_timer = {
-	.init		= at91rm9200_timer_init,
-};
-
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 358412f..3a4bc2e 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -104,12 +104,38 @@
 	}
 }
 
+static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
+{
+	/* Disable timer */
+	pit_write(AT91_PIT_MR, 0);
+}
+
+static void at91sam926x_pit_reset(void)
+{
+	/* Disable timer and irqs */
+	pit_write(AT91_PIT_MR, 0);
+
+	/* Clear any pending interrupts, wait for PIT to stop counting */
+	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
+		cpu_relax();
+
+	/* Start PIT but don't enable IRQ */
+	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+}
+
+static void at91sam926x_pit_resume(struct clock_event_device *cedev)
+{
+	at91sam926x_pit_reset();
+}
+
 static struct clock_event_device pit_clkevt = {
 	.name		= "pit",
 	.features	= CLOCK_EVT_FEAT_PERIODIC,
 	.shift		= 32,
 	.rating		= 100,
 	.set_mode	= pit_clkevt_mode,
+	.suspend	= at91sam926x_pit_suspend,
+	.resume		= at91sam926x_pit_resume,
 };
 
 
@@ -150,19 +176,6 @@
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
 
-static void at91sam926x_pit_reset(void)
-{
-	/* Disable timer and irqs */
-	pit_write(AT91_PIT_MR, 0);
-
-	/* Clear any pending interrupts, wait for PIT to stop counting */
-	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
-		cpu_relax();
-
-	/* Start PIT but don't enable IRQ */
-	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-}
-
 #ifdef CONFIG_OF
 static struct of_device_id pit_timer_ids[] = {
 	{ .compatible = "atmel,at91sam9260-pit" },
@@ -211,7 +224,7 @@
 /*
  * Set up both clocksource and clockevent support.
  */
-static void __init at91sam926x_pit_init(void)
+void __init at91sam926x_pit_init(void)
 {
 	unsigned long	pit_rate;
 	unsigned	bits;
@@ -250,12 +263,6 @@
 	clockevents_register_device(&pit_clkevt);
 }
 
-static void at91sam926x_pit_suspend(void)
-{
-	/* Disable timer */
-	pit_write(AT91_PIT_MR, 0);
-}
-
 void __init at91sam926x_ioremap_pit(u32 addr)
 {
 #if defined(CONFIG_OF)
@@ -272,9 +279,3 @@
 	if (!pit_base_addr)
 		panic("Impossible to ioremap PIT\n");
 }
-
-struct sys_timer at91sam926x_timer = {
-	.init		= at91sam926x_pit_init,
-	.suspend	= at91sam926x_pit_suspend,
-	.resume		= at91sam926x_pit_reset,
-};
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 0e57e44..0c07a44 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -42,9 +42,10 @@
 #define	AT91_TC_CLK1BASE	0x40
 #define	AT91_TC_CLK2BASE	0x80
 
-static unsigned long at91x40_gettimeoffset(void)
+static u32 at91x40_gettimeoffset(void)
 {
-	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
+	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
+		(AT91X40_MASTER_CLOCK / 128)) * 1000;
 }
 
 static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
@@ -64,6 +65,8 @@
 {
 	unsigned int v;
 
+	arch_gettimeoffset = at91x40_gettimeoffset;
+
 	at91_tc_write(AT91_TC_BCR, 0);
 	v = at91_tc_read(AT91_TC_BMR);
 	v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
@@ -79,9 +82,3 @@
 
 	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
 }
-
-struct sys_timer at91x40_timer = {
-	.init	= at91x40_timer_init,
-	.offset	= at91x40_gettimeoffset,
-};
-
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index b99b575..35ab632 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -90,7 +90,7 @@
 
 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= onearm_init_early,
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 854b979..f95e31c 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -210,7 +210,7 @@
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= afeb9260_init_early,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 28a18ce..ade948b 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -187,7 +187,7 @@
 
 MACHINE_START(CAM60, "KwikByte CAM60")
 	/* Maintainer: KwikByte */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cam60_init_early,
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index c17bb53..9298305 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -157,7 +157,7 @@
 
 MACHINE_START(CARMEVA, "Carmeva")
 	/* Maintainer: Conitec Datasystems */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= carmeva_init_early,
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 8474324..008527e 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -374,7 +374,7 @@
 MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cpu9krea_init_early,
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2a7af78..42f1353 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -178,7 +178,7 @@
 
 MACHINE_START(CPUAT91, "Eukrea")
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cpuat91_init_early,
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 48a531e..e5fde215 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -251,7 +251,7 @@
 
 MACHINE_START(CSB337, "Cogent CSB337")
 	/* Maintainer: Bill Gatliff */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= csb337_init_early,
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index ec0f3ab..fdf1106 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -132,7 +132,7 @@
 
 MACHINE_START(CSB637, "Cogent CSB637")
 	/* Maintainer: Bill Gatliff */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= csb637_init_early,
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 881170c..8db3013 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -49,7 +49,7 @@
 
 DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91_dt_initialize,
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index b489388..becf0a6 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -44,7 +44,7 @@
 
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
-	.timer		= &at91x40_timer,
+	.init_time	= at91x40_timer_init,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91eb01_init_early,
 	.init_irq	= at91eb01_init_irq,
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 9f5e71c..f9be816 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -116,7 +116,7 @@
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= eb9200_init_early,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index ef69e0e..b2fcd71 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -181,7 +181,7 @@
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
 	/* Maintainer: emQbit.com */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ecb_at91init_early,
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 50f3d37..77de410 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -149,7 +149,7 @@
 
 MACHINE_START(ECO920, "eco920")
 	/* Maintainer: Sascha Hauer */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= eco920_init_early,
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 5d44eba..737c085 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -159,7 +159,7 @@
 
 MACHINE_START(FLEXIBITY, "Flexibity Connect")
 	/* Maintainer: Maxim Osipov */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= flexibity_init_early,
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 191d37c..2ea7059 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -261,7 +261,7 @@
 
 MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
 	/* Maintainer: Sergio Tanzilli */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= foxg20_init_early,
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 23a2fa1..c1d61d2 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -574,7 +574,7 @@
 }
 
 MACHINE_START(GSIA18S, "GS_IA18_S")
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= gsia18s_init_early,
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 9a43d1e..88e2f5d 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -103,7 +103,7 @@
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
 	/* Maintainer: Sergei Sharonov */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= kafa_init_early,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index f168bec..0c519d9 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -149,7 +149,7 @@
 
 MACHINE_START(KB9200, "KB920x")
 	/* Maintainer: KwikByte, Inc. */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= kb9202_init_early,
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
deleted file mode 100644
index bc7a1c4..0000000
--- a/arch/arm/mach-at91/board-neocore926.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-neocore926.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation
- *  Copyright (C) 2008 ADENEO.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init neocore926_init_early(void)
-{
-	/* Initialize processor: 20 MHz crystal */
-	at91_initialize(20000000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata neocore926_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata neocore926_udc_data = {
-	.vbus_pin	= AT91_PIN_PA25,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-	return !at91_get_gpio_value(AT91_PIN_PA15);	/* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7843,
-	.x_min			= 150,
-	.x_max			= 3830,
-	.y_min			= 190,
-	.y_max			= 3830,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 450,
-	.y_plate_ohms		= 250,
-	.pressure_max		= 15000,
-	.debounce_max		= 1,
-	.debounce_rep		= 0,
-	.debounce_tol		= (~0),
-	.get_pendown_state	= ads7843_pendown_state,
-};
-
-static void __init neocore926_add_device_ts(void)
-{
-	at91_set_B_periph(AT91_PIN_PA15, 1);	/* External IRQ1, with pullup */
-	at91_set_gpio_input(AT91_PIN_PC13, 1);	/* Touchscreen BUSY signal */
-}
-#else
-static void __init neocore926_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info neocore926_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	{
-		.modalias	= "ads7846",
-		.chip_select	= 1,
-		.max_speed_hz	= 125000 * 16,
-		.bus_num	= 0,
-		.platform_data	= &ads_info,
-		.irq		= NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
-	},
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata neocore926_mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PE18,
-		.wp_pin		= AT91_PIN_PE19,
-	},
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata neocore926_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PE31,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata neocore926_nand_partition[] = {
-	{
-		.name	= "Linux Kernel",	/* "Partition 1", */
-		.offset	= 0,
-		.size	= SZ_8M,
-	},
-	{
-		.name	= "Filesystem",		/* "Partition 2", */
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_32M,
-	},
-	{
-		.name	= "Free",		/* "Partition 3", */
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata neocore926_nand_data = {
-	.ale			= 21,
-	.cle			= 22,
-	.rdy_pin		= AT91_PIN_PB19,
-	.rdy_pin_active_low	= 1,
-	.enable_pin		= AT91_PIN_PD15,
-	.ecc_mode		= NAND_ECC_SOFT,
-	.parts			= neocore926_nand_partition,
-	.num_parts		= ARRAY_SIZE(neocore926_nand_partition),
-	.det_pin		= -EINVAL,
-};
-
-static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 6,
-	.write_cycle		= 6,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init neocore926_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &neocore926_nand_smc_config);
-
-	at91_add_device_nand(&neocore926_nand_data);
-}
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
-	{
-		.name		= "TX09D50VM1CCA @ 60",
-		.refresh	= 60,
-		.xres		= 240,		.yres		= 320,
-		.pixclock	= KHZ2PICOS(5000),
-
-		.left_margin	= 1,		.right_margin	= 33,
-		.upper_margin	= 1,		.lower_margin	= 0,
-		.hsync_len	= 5,		.vsync_len	= 1,
-
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
-	.manufacturer	= "HIT",
-	.monitor	= "TX09D70VM1CCA",
-
-	.modedb		= at91_tft_vga_modes,
-	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-	.hfmin		= 15000,
-	.hfmax		= 64000,
-	.vfmin		= 50,
-	.vfmax		= 150,
-};
-
-#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
-	at91_set_gpio_value(AT91_PIN_PA30, on);
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata neocore926_lcdc_data = {
-	.lcdcon_is_backlight		= true,
-	.default_bpp			= 16,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91SAM9263_DEFAULT_LCDCON2,
-	.default_monspecs		= &at91fb_default_monspecs,
-	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
-	.guard_time			= 1,
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB555,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata neocore926_lcdc_data;
-#endif
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button neocore926_buttons[] = {
-	{	/* BP1, "leftclic" */
-		.code		= BTN_LEFT,
-		.gpio		= AT91_PIN_PC5,
-		.active_low	= 1,
-		.desc		= "left_click",
-		.wakeup		= 1,
-	},
-	{	/* BP2, "rightclic" */
-		.code		= BTN_RIGHT,
-		.gpio		= AT91_PIN_PC4,
-		.active_low	= 1,
-		.desc		= "right_click",
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data neocore926_button_data = {
-	.buttons	= neocore926_buttons,
-	.nbuttons	= ARRAY_SIZE(neocore926_buttons),
-};
-
-static struct platform_device neocore926_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &neocore926_button_data,
-	}
-};
-
-static void __init neocore926_add_device_buttons(void)
-{
-	at91_set_GPIO_periph(AT91_PIN_PC5, 0);	/* left button */
-	at91_set_deglitch(AT91_PIN_PC5, 1);
-	at91_set_GPIO_periph(AT91_PIN_PC4, 0);	/* right button */
-	at91_set_deglitch(AT91_PIN_PC4, 1);
-
-	platform_device_register(&neocore926_button_device);
-}
-#else
-static void __init neocore926_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- */
-static struct ac97c_platform_data neocore926_ac97_data = {
-	.reset_pin	= AT91_PIN_PA13,
-};
-
-
-static void __init neocore926_board_init(void)
-{
-	/* Serial */
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-	at91_add_device_serial();
-
-	/* USB Host */
-	at91_add_device_usbh(&neocore926_usbh_data);
-
-	/* USB Device */
-	at91_add_device_udc(&neocore926_udc_data);
-
-	/* SPI */
-	at91_set_gpio_output(AT91_PIN_PE20, 1);		/* select spi0 clock */
-	at91_add_device_spi(neocore926_spi_devices, ARRAY_SIZE(neocore926_spi_devices));
-
-	/* Touchscreen */
-	neocore926_add_device_ts();
-
-	/* MMC */
-	at91_add_device_mci(0, &neocore926_mci0_data);
-
-	/* Ethernet */
-	at91_add_device_eth(&neocore926_macb_data);
-
-	/* NAND */
-	neocore926_add_device_nand();
-
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-
-	/* LCD Controller */
-	at91_add_device_lcdc(&neocore926_lcdc_data);
-
-	/* Push Buttons */
-	neocore926_add_device_buttons();
-
-	/* AC97 */
-	at91_add_device_ac97(&neocore926_ac97_data);
-}
-
-MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
-	/* Maintainer: ADENEO */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= neocore926_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= neocore926_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 0299554..65c0d6b 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -217,7 +217,7 @@
 
 MACHINE_START(PCONTROL_G20, "PControl G20")
 	/* Maintainer: pgsellmann@portner-elektronik.at */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= pcontrol_g20_init_early,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 4938f1c..ab2b2ec 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -119,7 +119,7 @@
 
 MACHINE_START(PICOTUX2XX, "picotux 200")
 	/* Maintainer: Kleinhenz Elektronik GmbH */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= picotux200_init_early,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 33b1628..aa3bc9b 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -257,7 +257,7 @@
 
 MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c
index 5f9ce3d..3fcb662 100644
--- a/arch/arm/mach-at91/board-rm9200-dt.c
+++ b/arch/arm/mach-at91/board-rm9200-dt.c
@@ -47,7 +47,7 @@
 };
 
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
-	.timer		= &at91rm9200_timer,
+	.init_time      = at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91rm9200_dt_initialize,
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 9e5061b..690541b 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -219,7 +219,7 @@
 
 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 	/* Maintainer: SAN People/Atmel */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= dk_init_early,
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 58277db..8b17dad 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -186,7 +186,7 @@
 
 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
 	/* Maintainer: SAN People/Atmel */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index 2e8b833..f6d7f19 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -222,7 +222,7 @@
 
 MACHINE_START(RSI_EWS, "RSI EWS")
 	/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= rsi_ews_init_early,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index b75fbf6..43ee4dc 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -218,7 +218,7 @@
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	/* Maintainer: Olimex */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index f0135cd..0b153c8 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -343,7 +343,7 @@
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 13ebaa8..b446645 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -612,7 +612,7 @@
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 89b9608..3284df0 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -443,7 +443,7 @@
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 1b7dd9f..f9cd1f2 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -409,7 +409,7 @@
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -419,7 +419,7 @@
 
 MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index e4cc375..2a94896 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -502,7 +502,7 @@
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 377a109..aa265dc 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -320,7 +320,7 @@
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 9877150..3aaa978 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -177,7 +177,7 @@
 }
 
 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= snapper9260_init_early,
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 48a962b..a033b8d 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -272,7 +272,7 @@
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= stamp9g20_init_early,
@@ -282,7 +282,7 @@
 
 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= stamp9g20_init_early,
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index c1060f9..2487d94 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -355,7 +355,7 @@
 
 MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -365,7 +365,7 @@
 
 MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -375,7 +375,7 @@
 
 MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
 	/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 8673aeb..be08377 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -587,7 +587,7 @@
 
 MACHINE_START(YL9200, "uCdragon YL-9200")
 	/* Maintainer: S.Birtles */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= yl9200_init_early,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index fc593d6..78ab065 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -36,12 +36,11 @@
 
 
  /* Timer */
-struct sys_timer;
 extern void at91rm9200_ioremap_st(u32 addr);
-extern struct sys_timer at91rm9200_timer;
+extern void at91rm9200_timer_init(void);
 extern void at91sam926x_ioremap_pit(u32 addr);
-extern struct sys_timer at91sam926x_timer;
-extern struct sys_timer at91x40_timer;
+extern void at91sam926x_pit_init(void);
+extern void at91x40_timer_init(void);
 
  /* Clocks */
 #ifdef CONFIG_AT91_PMC_UNIT
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 97ad68a..5659f7c 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -196,6 +196,4 @@
 		barrier();
 }
 
-#define arch_decomp_wdog()
-
 #endif
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 48705c1..bf02471 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -7,7 +7,6 @@
 	select ARM_GIC
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GPIO_BCM
 	select SPARSE_IRQ
diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c
index 3a62f1b..f0f9aba 100644
--- a/arch/arm/mach-bcm/board_bcm.c
+++ b/arch/arm/mach-bcm/board_bcm.c
@@ -11,34 +11,19 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/irqchip.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-
 #include <asm/mach/time.h>
 
-static const struct of_device_id irq_match[] = {
-	{.compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{}
-};
-
 static void timer_init(void)
 {
 }
 
-static struct sys_timer timer = {
-	.init = timer_init,
-};
-
-static void __init init_irq(void)
-{
-	of_irq_init(irq_match);
-}
 
 static void __init board_init(void)
 {
@@ -49,9 +34,8 @@
 static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
 
 DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
-	.init_irq = init_irq,
-	.timer = &timer,
+	.init_irq = irqchip_init,
+	.init_time = timer_init,
 	.init_machine = board_init,
 	.dt_compat = bcm11351_dt_compat,
-	.handle_irq = gic_handle_irq,
 MACHINE_END
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index f0d739f..d615a61 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -17,8 +17,8 @@
 #include <linux/irqchip/bcm2835.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/bcm2835_timer.h>
 #include <linux/clk/bcm2835.h>
+#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -104,7 +104,7 @@
 	.init_irq = bcm2835_init_irq,
 	.handle_irq = bcm2835_handle_irq,
 	.init_machine = bcm2835_init,
-	.timer = &bcm2835_timer,
+	.init_time = clocksource_of_init,
 	.restart = bcm2835_restart,
 	.dt_compat = bcm2835_compat
 MACHINE_END
diff --git a/arch/arm/mach-bcm2835/include/mach/uncompress.h b/arch/arm/mach-bcm2835/include/mach/uncompress.h
index cc46dcc..bf86dca 100644
--- a/arch/arm/mach-bcm2835/include/mach/uncompress.h
+++ b/arch/arm/mach-bcm2835/include/mach/uncompress.h
@@ -42,4 +42,3 @@
 }
 
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index 3fbf43f..f385847 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -170,7 +170,7 @@
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.init_machine	= autcpu12_init,
 	.init_late	= autcpu12_init_late,
 	.handle_irq	= clps711x_handle_irq,
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index 60900dd..baab7da 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -140,7 +140,7 @@
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.init_machine	= cdb89712_init,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
index 0b32a48..014aa3c 100644
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ b/arch/arm/mach-clps711x/board-clep7312.c
@@ -40,7 +40,7 @@
 	.fixup		= fixup_clep7312,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 71aa5cf..5f928e9 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -173,7 +173,7 @@
 	.reserve	= edb7211_reserve,
 	.map_io		= edb7211_map_io,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.init_machine	= edb7211_init,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c
index 7d01255..c5675ef 100644
--- a/arch/arm/mach-clps711x/board-fortunet.c
+++ b/arch/arm/mach-clps711x/board-fortunet.c
@@ -78,7 +78,7 @@
 	.fixup		= fortunet_fixup,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 1518fc8..8d3ee67 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -224,7 +224,7 @@
 	.map_io		= p720t_map_io,
 	.init_early	= p720t_init_early,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.init_machine	= p720t_init,
 	.init_late	= p720t_init_late,
 	.handle_irq	= clps711x_handle_irq,
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index e046439..20ff50f 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -282,7 +282,7 @@
 	clk_register_clkdev(clk, name, NULL);
 }
 
-static void __init clps711x_timer_init(void)
+void __init clps711x_timer_init(void)
 {
 	int osc, ext, pll, cpu, bus, timl, timh, uart, spi;
 	u32 tmp;
@@ -345,10 +345,6 @@
 	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
 }
 
-struct sys_timer clps711x_timer = {
-	.init		= clps711x_timer_init,
-};
-
 void clps711x_restart(char mode, const char *cmd)
 {
 	soft_restart(0);
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index b7c0c75..f84a729 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -8,10 +8,8 @@
 #define CLPS711X_NR_GPIO	(4 * 8 + 3)
 #define CLPS711X_GPIO(prt, bit)	((prt) * 8 + (bit))
 
-struct sys_timer;
-
 extern void clps711x_map_io(void);
 extern void clps711x_init_irq(void);
+extern void clps711x_timer_init(void);
 extern void clps711x_handle_irq(struct pt_regs *regs);
 extern void clps711x_restart(char mode, const char *cmd);
-extern struct sys_timer clps711x_timer;
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
index 7b28d6a..5f02d06 100644
--- a/arch/arm/mach-clps711x/include/mach/uncompress.h
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -53,5 +53,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index ae30539..a71867e 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -28,7 +28,6 @@
 #include <linux/usb/ohci_pdriver.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -250,8 +249,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
-	.timer		= &cns3xxx_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= cns3xxx_timer_init,
 	.init_machine	= cns3420_init,
 	.restart	= cns3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 031805b..e698f26 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -12,10 +12,10 @@
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <mach/cns3xxx.h>
 #include "core.h"
@@ -134,7 +134,6 @@
 
 static struct clock_event_device cns3xxx_tmr1_clockevent = {
 	.name		= "cns3xxx timer1",
-	.shift		= 8,
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= cns3xxx_timer_set_mode,
 	.set_next_event	= cns3xxx_timer_set_next_event,
@@ -145,15 +144,9 @@
 static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
 {
 	cns3xxx_tmr1_clockevent.irq = timer_irq;
-	cns3xxx_tmr1_clockevent.mult =
-		div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC,
-		       cns3xxx_tmr1_clockevent.shift);
-	cns3xxx_tmr1_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent);
-	cns3xxx_tmr1_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent);
-
-	clockevents_register_device(&cns3xxx_tmr1_clockevent);
+	clockevents_config_and_register(&cns3xxx_tmr1_clockevent,
+					(cns3xxx_cpu_clock() >> 3) * 1000000,
+					0xf, 0xffffffff);
 }
 
 /*
@@ -235,17 +228,13 @@
 	cns3xxx_clockevents_init(timer_irq);
 }
 
-static void __init cns3xxx_timer_init(void)
+void __init cns3xxx_timer_init(void)
 {
 	cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
 
 	__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
 }
 
-struct sys_timer cns3xxx_timer = {
-	.init = cns3xxx_timer_init,
-};
-
 #ifdef CONFIG_CACHE_L2X0
 
 void __init cns3xxx_l2x0_init(void)
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index 4894b8c..b23b17b 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -11,7 +11,7 @@
 #ifndef __CNS3XXX_CORE_H
 #define __CNS3XXX_CORE_H
 
-extern struct sys_timer cns3xxx_timer;
+extern void cns3xxx_timer_init(void);
 
 #ifdef CONFIG_CACHE_L2X0
 void __init cns3xxx_l2x0_init(void);
diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
index a91b605..7a030b9 100644
--- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
@@ -51,4 +51,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 95b5e10..e374271 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -679,7 +679,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= da830_evm_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= da830_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 0299915..3b33560 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1599,7 +1599,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= da850_evm_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= da850_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index cdf8d07..147b8e1 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -355,7 +355,7 @@
 	.atag_offset  = 0x100,
 	.map_io	      = dm355_evm_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = dm355_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index d419545..dff4ddc 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -274,7 +274,7 @@
 	.atag_offset  = 0x100,
 	.map_io	      = dm355_leopard_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = dm355_leopard_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 5d49c75..c2d4958 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -616,7 +616,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= dm365_evm_map_io,
 	.init_irq	= davinci_irq_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= dm365_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index f5e018d..e4a16f9 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -825,7 +825,7 @@
 	.atag_offset  = 0x100,
 	.map_io	      = davinci_evm_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = davinci_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 6e2f163..de7adff 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -818,7 +818,7 @@
 	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer        = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
@@ -829,7 +829,7 @@
 	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer        = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 43e4a0d..b0df578 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -570,7 +570,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= mityomapl138_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= mityomapl138_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 3e3e3af..1c98107 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -237,7 +237,7 @@
 	.atag_offset	= 0x100,
 	.map_io		 = davinci_ntosd2_map_io,
 	.init_irq	= davinci_irq_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = davinci_ntosd2_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index dc1208e..deb3922 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -341,7 +341,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= omapl138_hawk_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= omapl138_hawk_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 6957787..739be7e 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -155,7 +155,7 @@
 	.atag_offset  = 0x100,
 	.map_io	      = davinci_sffsdr_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = davinci_sffsdr_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index be30997..4f41602 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -280,7 +280,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= tnetv107x_init,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= tnetv107x_evm_board_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 37c27af..9a7c76e 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -56,7 +56,7 @@
 DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
 	.map_io		= da850_init,
 	.init_irq	= da8xx_init_irq,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= da850_init_machine,
 	.dt_compat	= da850_boards_compat,
 	.init_late	= davinci_init_late,
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 046c723..b124b77 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -15,9 +15,7 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 
-struct sys_timer;
-
-extern struct sys_timer davinci_timer;
+extern void davinci_timer_init(void);
 
 extern void davinci_irq_init(void);
 extern void __iomem *davinci_intc_base;
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 3a0ff90..f49c2916 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -101,4 +101,3 @@
 }
 
 #define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 9847938..bad361e 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -337,7 +337,7 @@
 };
 
 
-static void __init davinci_timer_init(void)
+void __init davinci_timer_init(void)
 {
 	struct clk *timer_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -410,11 +410,6 @@
 		timer32_config(&timers[i]);
 }
 
-struct sys_timer davinci_timer = {
-	.init   = davinci_timer_init,
-};
-
-
 /* reset board using watchdog timer */
 void davinci_watchdog_reset(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 792b4e2..0dc39cf 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -92,6 +92,6 @@
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
-	.timer		= &dove_timer,
+	.init_time	= dove_timer_init,
 	.restart	= dove_restart,
 MACHINE_END
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 89f4f99..ea84c535 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -8,35 +8,24 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
 #include <linux/clk-provider.h>
 #include <linux/clk/mvebu.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/timex.h>
+#include <linux/platform_data/dma-mv_xor.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_device.h>
 #include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/mach/pci.h>
-#include <mach/dove.h>
-#include <mach/pm.h>
 #include <mach/bridge-regs.h>
-#include <asm/mach/arch.h>
-#include <linux/irq.h>
-#include <plat/time.h>
-#include <linux/platform_data/usb-ehci-orion.h>
-#include <linux/platform_data/dma-mv_xor.h>
-#include <plat/irq.h>
+#include <mach/pm.h>
 #include <plat/common.h>
-#include <plat/addr-map.h>
+#include <plat/irq.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -242,17 +231,13 @@
 	return 166666667;
 }
 
-static void __init dove_timer_init(void)
+void __init dove_timer_init(void)
 {
 	dove_tclk = dove_find_tclk();
 	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
 			IRQ_DOVE_BRIDGE, dove_tclk);
 }
 
-struct sys_timer dove_timer = {
-	.init = dove_timer_init,
-};
-
 /*****************************************************************************
  * Cryptographic Engines and Security Accelerator (CESA)
  ****************************************************************************/
@@ -454,7 +439,7 @@
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
 	.init_irq	= orion_dt_init_irq,
-	.timer		= &dove_timer,
+	.init_time	= dove_timer_init,
 	.init_machine	= dove_dt_init,
 	.restart	= dove_restart,
 	.dt_compat	= dove_dt_board_compat,
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 1a23340..ee59fba 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -14,7 +14,7 @@
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
-extern struct sys_timer dove_timer;
+extern void dove_timer_init(void);
 
 /*
  * Basic Dove init functions used early by machine-setup.
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index bc2867f..76e26f9 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -98,6 +98,6 @@
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
-	.timer		= &dove_timer,
+	.init_time	= dove_timer_init,
 	.restart	= dove_restart,
 MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
index 2c5cdd7..5c8ae9b 100644
--- a/arch/arm/mach-dove/include/mach/uncompress.h
+++ b/arch/arm/mach-dove/include/mach/uncompress.h
@@ -34,4 +34,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index f0fe6b5..b13cc74 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -158,7 +158,7 @@
  * interrupt, then the PIT counter will roll over (ie, be negative).
  * This actually works out to be convenient.
  */
-static unsigned long ebsa110_gettimeoffset(void)
+static u32 ebsa110_gettimeoffset(void)
 {
 	unsigned long offset, count;
 
@@ -181,7 +181,7 @@
 	 */
 	offset = offset * (1000000 / HZ) / COUNT;
 
-	return offset;
+	return offset * 1000;
 }
 
 static irqreturn_t
@@ -213,8 +213,10 @@
 /*
  * Set up timer interrupt.
  */
-static void __init ebsa110_timer_init(void)
+void __init ebsa110_timer_init(void)
 {
+	arch_gettimeoffset = ebsa110_gettimeoffset;
+
 	/*
 	 * Timer 1, mode 2, LSB/MSB
 	 */
@@ -225,11 +227,6 @@
 	setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
 }
 
-static struct sys_timer ebsa110_timer = {
-	.init		= ebsa110_timer_init,
-	.offset		= ebsa110_gettimeoffset,
-};
-
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.iobase		= 0x3f8,
@@ -328,6 +325,6 @@
 	.map_io		= ebsa110_map_io,
 	.init_early	= ebsa110_init_early,
 	.init_irq	= ebsa110_init_irq,
-	.timer		= &ebsa110_timer,
+	.init_time	= ebsa110_timer_init,
 	.restart	= ebsa110_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
index 3204150..ab64bea 100644
--- a/arch/arm/mach-ebsa110/include/mach/uncompress.h
+++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h
@@ -42,4 +42,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 41383bf..bda6c3a 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -17,7 +17,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -39,8 +38,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= adssphere_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index e85bf17..c49ed3d 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -34,6 +34,7 @@
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/export.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <mach/hardware.h>
 #include <linux/platform_data/video-ep93xx.h>
@@ -44,8 +45,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <asm/hardware/vic.h>
-
 #include "soc.h"
 
 /*************************************************************************
@@ -140,11 +139,29 @@
 	.handler	= ep93xx_timer_interrupt,
 };
 
-static void __init ep93xx_timer_init(void)
+static u32 ep93xx_gettimeoffset(void)
+{
+	int offset;
+
+	offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
+
+	/*
+	 * Timer 4 is based on a 983.04 kHz reference clock,
+	 * so dividing by 983040 gives the fraction of a second,
+	 * so dividing by 0.983040 converts to uS.
+	 * Refactor the calculation to avoid overflow.
+	 * Finally, multiply by 1000 to give nS.
+	 */
+	return (offset + (53 * offset / 3072)) * 1000;
+}
+
+void __init ep93xx_timer_init(void)
 {
 	u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
 		    EP93XX_TIMER123_CONTROL_CLKSEL;
 
+	arch_gettimeoffset = ep93xx_gettimeoffset;
+
 	/* Enable periodic HZ timer.  */
 	__raw_writel(tmode, EP93XX_TIMER1_CONTROL);
 	__raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
@@ -158,21 +175,6 @@
 	setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
 }
 
-static unsigned long ep93xx_gettimeoffset(void)
-{
-	int offset;
-
-	offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
-
-	/* Calculate (1000000 / 983040) * offset.  */
-	return offset + (53 * offset / 3072);
-}
-
-struct sys_timer ep93xx_timer = {
-	.init		= ep93xx_timer_init,
-	.offset		= ep93xx_gettimeoffset,
-};
-
 
 /*************************************************************************
  * EP93xx IRQ handling
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index b8f53d5..27b14ae 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -39,7 +39,6 @@
 #include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -276,8 +275,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -290,8 +288,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -304,8 +301,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -318,8 +314,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -332,8 +327,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -346,8 +340,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -360,8 +353,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -374,8 +366,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 7fd705b..0cca5b1 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -17,7 +17,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -39,8 +38,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= gesbc9312_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 33a5122..a14e1b3 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -53,7 +53,7 @@
 void ep93xx_ide_release_gpio(struct platform_device *pdev);
 
 void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
+extern void ep93xx_timer_init(void);
 
 void ep93xx_restart(char, const char *);
 void ep93xx_init_late(void);
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index d64274f..d2afb4d 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -86,5 +86,3 @@
 {
 	ethernet_reset();
 }
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 3d7cdab..373583c 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -18,7 +18,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -82,8 +81,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= micro9_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -96,8 +94,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= micro9_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -110,8 +107,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= micro9_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -124,8 +120,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= micro9_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 0eb3f17..36f22c1 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -25,7 +25,6 @@
 #include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -83,8 +82,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= simone_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 50043ee..aa86f86 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -31,7 +31,6 @@
 #include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -176,8 +175,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer 		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= snappercl15_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 3c4c233..61f4b5d 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -22,7 +22,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -246,8 +245,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= ts72xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index ba92e25..605956f 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -34,7 +34,6 @@
 #include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -364,8 +363,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= vision_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 0c7e3ad..d63d399c 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
@@ -22,12 +23,13 @@
 #include <linux/of_irq.h>
 #include <linux/export.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip.h>
 #include <linux/of_address.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/cacheflush.h>
@@ -35,7 +37,6 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 #include <mach/regs-gpio.h>
-#include <mach/pmu.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
@@ -440,220 +441,6 @@
 #endif
 }
 
-#define COMBINER_ENABLE_SET	0x0
-#define COMBINER_ENABLE_CLEAR	0x4
-#define COMBINER_INT_STATUS	0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
-	unsigned int irq_offset;
-	unsigned int irq_mask;
-	void __iomem *base;
-};
-
-static struct irq_domain *combiner_irq_domain;
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
-	struct combiner_chip_data *combiner_data =
-		irq_data_get_irq_chip_data(data);
-
-	return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->hwirq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->hwirq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
-	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-	unsigned int cascade_irq, combiner_irq;
-	unsigned long status;
-
-	chained_irq_enter(chip, desc);
-
-	spin_lock(&irq_controller_lock);
-	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
-	spin_unlock(&irq_controller_lock);
-	status &= chip_data->irq_mask;
-
-	if (status == 0)
-		goto out;
-
-	combiner_irq = __ffs(status);
-
-	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
-	if (unlikely(cascade_irq >= NR_IRQS))
-		do_bad_IRQ(cascade_irq, desc);
-	else
-		generic_handle_irq(cascade_irq);
-
- out:
-	chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
-	.name		= "COMBINER",
-	.irq_mask	= combiner_mask_irq,
-	.irq_unmask	= combiner_unmask_irq,
-};
-
-static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
-	unsigned int max_nr;
-
-	if (soc_is_exynos5250())
-		max_nr = EXYNOS5_MAX_COMBINER_NR;
-	else
-		max_nr = EXYNOS4_MAX_COMBINER_NR;
-
-	if (combiner_nr >= max_nr)
-		BUG();
-	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
-		BUG();
-	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-static void __init combiner_init_one(unsigned int combiner_nr,
-				     void __iomem *base)
-{
-	combiner_data[combiner_nr].base = base;
-	combiner_data[combiner_nr].irq_offset = irq_find_mapping(
-		combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
-	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
-	/* Disable all interrupts */
-	__raw_writel(combiner_data[combiner_nr].irq_mask,
-		     base + COMBINER_ENABLE_CLEAR);
-}
-
-#ifdef CONFIG_OF
-static int combiner_irq_domain_xlate(struct irq_domain *d,
-				     struct device_node *controller,
-				     const u32 *intspec, unsigned int intsize,
-				     unsigned long *out_hwirq,
-				     unsigned int *out_type)
-{
-	if (d->of_node != controller)
-		return -EINVAL;
-
-	if (intsize < 2)
-		return -EINVAL;
-
-	*out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
-	*out_type = 0;
-
-	return 0;
-}
-#else
-static int combiner_irq_domain_xlate(struct irq_domain *d,
-				     struct device_node *controller,
-				     const u32 *intspec, unsigned int intsize,
-				     unsigned long *out_hwirq,
-				     unsigned int *out_type)
-{
-	return -EINVAL;
-}
-#endif
-
-static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
-				   irq_hw_number_t hw)
-{
-	irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
-	irq_set_chip_data(irq, &combiner_data[hw >> 3]);
-	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-
-	return 0;
-}
-
-static struct irq_domain_ops combiner_irq_domain_ops = {
-	.xlate	= combiner_irq_domain_xlate,
-	.map	= combiner_irq_domain_map,
-};
-
-static void __init combiner_init(void __iomem *combiner_base,
-				 struct device_node *np)
-{
-	int i, irq, irq_base;
-	unsigned int max_nr, nr_irq;
-
-	if (np) {
-		if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
-			pr_warning("%s: number of combiners not specified, "
-				"setting default as %d.\n",
-				__func__, EXYNOS4_MAX_COMBINER_NR);
-			max_nr = EXYNOS4_MAX_COMBINER_NR;
-		}
-	} else {
-		max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
-						EXYNOS4_MAX_COMBINER_NR;
-	}
-	nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
-
-	irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
-	if (IS_ERR_VALUE(irq_base)) {
-		irq_base = COMBINER_IRQ(0, 0);
-		pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
-	}
-
-	combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
-				&combiner_irq_domain_ops, &combiner_data);
-	if (WARN_ON(!combiner_irq_domain)) {
-		pr_warning("%s: irq domain init failed\n", __func__);
-		return;
-	}
-
-	for (i = 0; i < max_nr; i++) {
-		combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
-		irq = IRQ_SPI(i);
-#ifdef CONFIG_OF
-		if (np)
-			irq = irq_of_parse_and_map(np, i);
-#endif
-		combiner_cascade_irq(i, irq);
-	}
-}
-
-#ifdef CONFIG_OF
-static int __init combiner_of_init(struct device_node *np,
-				   struct device_node *parent)
-{
-	void __iomem *combiner_base;
-
-	combiner_base = of_iomap(np, 0);
-	if (!combiner_base) {
-		pr_err("%s: failed to map combiner registers\n", __func__);
-		return -ENXIO;
-	}
-
-	combiner_init(combiner_base, np);
-
-	return 0;
-}
-
-static const struct of_device_id exynos_dt_irq_match[] = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{ .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
-	{ .compatible = "samsung,exynos4210-combiner",
-			.data = combiner_of_init, },
-	{},
-};
-#endif
-
 void __init exynos4_init_irq(void)
 {
 	unsigned int gic_bank_offset;
@@ -664,7 +451,7 @@
 		gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL);
 #ifdef CONFIG_OF
 	else
-		of_irq_init(exynos_dt_irq_match);
+		irqchip_init();
 #endif
 
 	if (!of_have_populated_dt())
@@ -681,7 +468,7 @@
 void __init exynos5_init_irq(void)
 {
 #ifdef CONFIG_OF
-	of_irq_init(exynos_dt_irq_match);
+	irqchip_init();
 #endif
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 04744f9..9339bb8 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,7 +12,7 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
-extern struct sys_timer exynos4_timer;
+extern void exynos4_timer_init(void);
 
 struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);
@@ -60,8 +60,31 @@
 #define exynos4212_register_clocks()
 #endif
 
+struct device_node;
+void combiner_init(void __iomem *combiner_base, struct device_node *np);
+
 extern struct smp_operations exynos_smp_ops;
 
 extern void exynos_cpu_die(unsigned int cpu);
 
+/* PMU(Power Management Unit) support */
+
+#define PMU_TABLE_END	NULL
+
+enum sys_powerdown {
+	SYS_AFTR,
+	SYS_LPA,
+	SYS_SLEEP,
+	NUM_SYS_POWERDOWN,
+};
+
+extern unsigned long l2x0_regs_phys;
+struct exynos_pmu_conf {
+	void __iomem *reg;
+	unsigned int val[NUM_SYS_POWERDOWN];
+};
+
+extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
+extern void s3c_cpu_resume(void);
+
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 0509241..fcfe025 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -23,10 +23,11 @@
 #include <asm/cpuidle.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-pmu.h>
-#include <mach/pmu.h>
 
 #include <plat/cpu.h>
 
+#include "common.h"
+
 #define REG_DIRECTGO_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
 			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
 			(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index 9d1a609..c662c89 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -21,7 +21,8 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
-#include <mach/regs-audss.h>
+
+#define EXYNOS4_AUDSS_INT_MEM	(0x03000000)
 
 static int exynos4_cfg_i2s(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-exynos/include/mach/pmu.h b/arch/arm/mach-exynos/include/mach/pmu.h
deleted file mode 100644
index 7c27c2d..0000000
--- a/arch/arm/mach-exynos/include/mach/pmu.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS4210 - PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PMU_H
-#define __ASM_ARCH_PMU_H __FILE__
-
-#define PMU_TABLE_END	NULL
-
-enum sys_powerdown {
-	SYS_AFTR,
-	SYS_LPA,
-	SYS_SLEEP,
-	NUM_SYS_POWERDOWN,
-};
-
-extern unsigned long l2x0_regs_phys;
-struct exynos_pmu_conf {
-	void __iomem *reg;
-	unsigned int val[NUM_SYS_POWERDOWN];
-};
-
-extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
-
-#endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-audss.h b/arch/arm/mach-exynos/include/mach/regs-audss.h
deleted file mode 100644
index ca5a8b6..0000000
--- a/arch/arm/mach-exynos/include/mach/regs-audss.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-exynos4/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- *		http://www.samsung.com
- *
- * Exynos4 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define EXYNOS4_AUDSS_INT_MEM	(0x03000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-irq.h b/arch/arm/mach-exynos/include/mach/regs-irq.h
index 9c7b4bf..f2b5050 100644
--- a/arch/arm/mach-exynos/include/mach/regs-irq.h
+++ b/arch/arm/mach-exynos/include/mach/regs-irq.h
@@ -13,7 +13,7 @@
 #ifndef __ASM_ARCH_REGS_IRQ_H
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/map.h>
 
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index b938f9f..685f291 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -16,7 +16,6 @@
 #include <linux/smsc911x.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
@@ -201,9 +200,8 @@
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= armlex4210_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 92757ff..112d10e 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -15,7 +15,6 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <mach/map.h>
 
 #include <plat/cpu.h>
@@ -107,10 +106,9 @@
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= exynos4_dt_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index ea9e302..973a066 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -16,7 +16,6 @@
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <mach/map.h>
 #include <mach/regs-pmu.h>
 
@@ -185,10 +184,9 @@
 	.init_irq	= exynos5_init_irq,
 	.smp		= smp_ops(exynos_smp_ops),
 	.map_io		= exynos5_dt_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 27d4ed8..b8b3fbf 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -39,7 +39,6 @@
 #include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
@@ -1379,10 +1378,9 @@
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= nuri_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= nuri_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.reserve        = &nuri_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 5e34b9c..579d2d1 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -29,7 +29,6 @@
 #include <linux/platform_data/usb-exynos.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -814,10 +813,9 @@
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= origen_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= origen_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.reserve	= &origen_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index ae6da40..fe61496 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -25,7 +25,6 @@
 #include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/samsung_fimd.h>
@@ -376,9 +375,8 @@
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.restart	= exynos4_restart,
 	.reserve	= &smdk4x12_reserve,
 MACHINE_END
@@ -390,10 +388,9 @@
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.restart	= exynos4_restart,
 	.reserve	= &smdk4x12_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 35548e3..d716729 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -26,7 +26,6 @@
 #include <linux/platform_data/usb-exynos.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -423,9 +422,8 @@
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
@@ -436,10 +434,9 @@
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 9e3340f..c9d33a4 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -29,7 +29,6 @@
 #include <drm/exynos_drm.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/samsung_fimd.h>
@@ -1151,10 +1150,9 @@
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= universal_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &s5p_timer,
+	.init_time	= s5p_timer_init,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 57668eb..c9d6650 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -22,7 +22,6 @@
 #include <linux/of.h>
 
 #include <asm/arch_timer.h>
-#include <asm/hardware/gic.h>
 #include <asm/localtimer.h>
 
 #include <plat/cpu.h>
@@ -255,13 +254,9 @@
 
 static void exynos4_clockevent_init(void)
 {
-	clockevents_calc_mult_shift(&mct_comp_device, clk_rate, 5);
-	mct_comp_device.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &mct_comp_device);
-	mct_comp_device.min_delta_ns =
-		clockevent_delta2ns(0xf, &mct_comp_device);
 	mct_comp_device.cpumask = cpumask_of(0);
-	clockevents_register_device(&mct_comp_device);
+	clockevents_config_and_register(&mct_comp_device, clk_rate,
+					0xf, 0xffffffff);
 
 	if (soc_is_exynos5250())
 		setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
@@ -404,14 +399,8 @@
 	evt->set_mode = exynos4_tick_set_mode;
 	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	evt->rating = 450;
-
-	clockevents_calc_mult_shift(evt, clk_rate / (TICK_BASE_CNT + 1), 5);
-	evt->max_delta_ns =
-		clockevent_delta2ns(0x7fffffff, evt);
-	evt->min_delta_ns =
-		clockevent_delta2ns(0xf, evt);
-
-	clockevents_register_device(evt);
+	clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
+					0xf, 0x7fffffff);
 
 	exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
 
@@ -478,7 +467,7 @@
 #endif /* CONFIG_LOCAL_TIMERS */
 }
 
-static void __init exynos_timer_init(void)
+void __init exynos4_timer_init(void)
 {
 	if (soc_is_exynos5440()) {
 		arch_timer_of_register();
@@ -494,7 +483,3 @@
 	exynos4_clocksource_init();
 	exynos4_clockevent_init();
 }
-
-struct sys_timer exynos4_timer = {
-	.init		= exynos_timer_init,
-};
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index c5c840e..60f7c5b 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -20,9 +20,9 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
@@ -149,7 +149,7 @@
 
 		__raw_writel(virt_to_phys(exynos4_secondary_startup),
 							cpu_boot_reg(phys_cpu));
-		gic_raise_softirq(cpumask_of(cpu), 0);
+		arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
 		if (pen_release == -1)
 			break;
@@ -190,8 +190,6 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 5106ab8..e3faaa81 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -34,7 +34,8 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-pmu.h>
 #include <mach/pm-core.h>
-#include <mach/pmu.h>
+
+#include "common.h"
 
 static struct sleep_save exynos4_set_clksrc[] = {
 	{ .reg = EXYNOS4_CLKSRC_MASK_TOP		, .val = 0x00000001, },
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index 3a48c85..daebc1a 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -14,7 +14,8 @@
 #include <linux/bug.h>
 
 #include <mach/regs-clock.h>
-#include <mach/pmu.h>
+
+#include "common.h"
 
 static struct exynos_pmu_conf *exynos_pmu_config;
 
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 25b4536..6987a09 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -90,6 +90,6 @@
 	.fixup		= fixup_cats,
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
-	.timer		= &isa_timer,
+	.init_time	= isa_timer_init,
 	.restart	= footbridge_restart,
 MACHINE_END
diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h
index c9767b89..a846e50 100644
--- a/arch/arm/mach-footbridge/common.h
+++ b/arch/arm/mach-footbridge/common.h
@@ -1,6 +1,6 @@
 
-extern struct sys_timer footbridge_timer;
-extern struct sys_timer isa_timer;
+extern void footbridge_timer_init(void);
+extern void isa_timer_init(void);
 
 extern void isa_rtc_init(void);
 
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index 3b54196..9ee78f7 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -93,7 +93,7 @@
 /*
  * Set up timer interrupt.
  */
-static void __init footbridge_timer_init(void)
+void __init footbridge_timer_init(void)
 {
 	struct clock_event_device *ce = &ckevt_dc21285;
 
@@ -101,14 +101,6 @@
 
 	setup_irq(ce->irq, &footbridge_timer_irq);
 
-	clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
-	ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
-	ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
 	ce->cpumask = cpumask_of(smp_processor_id());
-
-	clockevents_register_device(ce);
+	clockevents_config_and_register(ce, mem_fclk_21285, 0x4, 0xffffff);
 }
-
-struct sys_timer footbridge_timer = {
-	.init		= footbridge_timer_init,
-};
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index b09551e..b082435 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -101,7 +101,7 @@
 	.video_end	= 0x000bffff,
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
-	.timer		= &footbridge_timer,
+	.init_time	= footbridge_timer_init,
 	.restart	= footbridge_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h
index 5dfa442..a69398c 100644
--- a/arch/arm/mach-footbridge/include/mach/uncompress.h
+++ b/arch/arm/mach-footbridge/include/mach/uncompress.h
@@ -35,4 +35,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index c40bb41..d9301dd 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -31,14 +31,10 @@
 	.dev_id		= &i8253_clockevent,
 };
 
-static void __init isa_timer_init(void)
+void __init isa_timer_init(void)
 {
 	clocksource_i8253_init();
 
 	setup_irq(i8253_clockevent.irq, &pit_timer_irq);
 	clockevent_i8253_init(false);
 }
-
-struct sys_timer isa_timer = {
-	.init		= isa_timer_init,
-};
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index d2d1433..90ea23f 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -766,6 +766,6 @@
 	.fixup		= fixup_netwinder,
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
-	.timer		= &isa_timer,
+	.init_time	= isa_timer_init,
 	.restart	= netwinder_restart,
 MACHINE_END
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index e1e9990..7bdeabd 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -18,7 +18,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
-	.timer		= &footbridge_timer,
+	.init_time	= footbridge_timer_init,
 	.restart	= footbridge_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 5927d3c..08bd650 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -31,10 +31,6 @@
 
 #include "common.h"
 
-static struct sys_timer ib4220b_timer = {
-	.init	= gemini_timer_init,
-};
-
 static struct gpio_led ib4220b_leds[] = {
 	{
 		.name			= "nas4220b:orange:hdd",
@@ -105,6 +101,6 @@
 	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
-	.timer		= &ib4220b_timer,
+	.init_time	= gemini_timer_init,
 	.init_machine	= ib4220b_init,
 MACHINE_END
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index cd7437a..fa0a363 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -71,10 +71,6 @@
 	},
 };
 
-static struct sys_timer rut1xx_timer = {
-	.init	= gemini_timer_init,
-};
-
 static void __init rut1xx_init(void)
 {
 	gemini_gpio_init();
@@ -89,6 +85,6 @@
 	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
-	.timer		= &rut1xx_timer,
+	.init_time	= gemini_timer_init,
 	.init_machine	= rut1xx_init,
 MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index a367880..3321cd6 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -80,10 +80,6 @@
 	},
 };
 
-static struct sys_timer wbd111_timer = {
-	.init	= gemini_timer_init,
-};
-
 static struct mtd_partition wbd111_partitions[] = {
 	{
 		.name		= "RedBoot",
@@ -132,6 +128,6 @@
 	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
-	.timer		= &wbd111_timer,
+	.init_time	= gemini_timer_init,
 	.init_machine	= wbd111_init,
 MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index f382811..fe33c82 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -80,10 +80,6 @@
 	},
 };
 
-static struct sys_timer wbd222_timer = {
-	.init	= gemini_timer_init,
-};
-
 static struct mtd_partition wbd222_partitions[] = {
 	{
 		.name		= "RedBoot",
@@ -132,6 +128,6 @@
 	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
-	.timer		= &wbd222_timer,
+	.init_time	= gemini_timer_init,
 	.init_machine	= wbd222_init,
 MACHINE_END
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
index 0efa262..02e2256 100644
--- a/arch/arm/mach-gemini/include/mach/uncompress.h
+++ b/arch/arm/mach-gemini/include/mach/uncompress.h
@@ -39,6 +39,4 @@
  */
 #define arch_decomp_setup()
 
-#define arch_decomp_wdog()
-
 #endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index aa1331e..17ef91f 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -42,12 +42,12 @@
 }
 
 /*
- * Return usecs since last timer reload
+ * Return nsecs since last timer reload
  * (timercount * (usecs perjiffie)) / (ticks per jiffie)
  */
-unsigned long h720x_gettimeoffset(void)
+u32 h720x_gettimeoffset(void)
 {
-	return (CPU_REG (TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH;
+	return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000;
 }
 
 /*
diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h
index 2489537..7e73841 100644
--- a/arch/arm/mach-h720x/common.h
+++ b/arch/arm/mach-h720x/common.h
@@ -13,18 +13,18 @@
  *
  */
 
-extern unsigned long h720x_gettimeoffset(void);
+extern u32 h720x_gettimeoffset(void);
 extern void __init h720x_init_irq(void);
 extern void __init h720x_map_io(void);
 extern void h720x_restart(char, const char *);
 
 #ifdef CONFIG_ARCH_H7202
-extern struct sys_timer h7202_timer;
+extern void h7202_timer_init(void);
 extern void __init init_hw_h7202(void);
 extern void __init h7202_init_irq(void);
 extern void __init h7202_init_time(void);
 #endif
 
 #ifdef CONFIG_ARCH_H7201
-extern struct sys_timer h7201_timer;
+extern void h7201_timer_init(void);
 #endif
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index 24df2a3..13c7412 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -44,8 +44,10 @@
 /*
  * Setup TIMER0 as system timer
  */
-void __init h7201_init_time(void)
+void __init h7201_timer_init(void)
 {
+	arch_gettimeoffset = h720x_gettimeoffset;
+
 	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
 	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
 	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
@@ -53,8 +55,3 @@
 
 	setup_irq(IRQ_TIMER0, &h7201_timer_irq);
 }
-
-struct sys_timer h7201_timer = {
-	.init		= h7201_init_time,
-	.offset		= h720x_gettimeoffset,
-};
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index c37d570..e2ae7e8 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -178,8 +178,10 @@
 /*
  * Setup TIMER0 as system timer
  */
-void __init h7202_init_time(void)
+void __init h7202_timer_init(void)
 {
+	arch_gettimeoffset = h720x_gettimeoffset;
+
 	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
 	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
 	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
@@ -188,11 +190,6 @@
 	setup_irq(IRQ_TIMER0, &h7202_timer_irq);
 }
 
-struct sys_timer h7202_timer = {
-	.init		= h7202_init_time,
-	.offset		= h720x_gettimeoffset,
-};
-
 void __init h7202_init_irq (void)
 {
 	int 	irq;
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 5fdb20c..4fdeb68 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -32,7 +32,7 @@
 	.atag_offset	= 0x1000,
 	.map_io		= h720x_map_io,
 	.init_irq	= h720x_init_irq,
-	.timer		= &h7201_timer,
+	.init_time	= h7201_timer_init,
 	.dma_zone_size	= SZ_256M,
 	.restart	= h720x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 1696730..f68e967 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -74,7 +74,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= h720x_map_io,
 	.init_irq	= h7202_init_irq,
-	.timer		= &h7202_timer,
+	.init_time	= h7202_timer_init,
 	.init_machine	= init_eval_h7202,
 	.dma_zone_size	= SZ_256M,
 	.restart	= h720x_restart,
diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h
index d662323..43e343c 100644
--- a/arch/arm/mach-h720x/include/mach/uncompress.h
+++ b/arch/arm/mach-h720x/include/mach/uncompress.h
@@ -32,6 +32,5 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
 
 #endif
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 65656ff..a4f9f50 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -18,6 +18,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
@@ -34,7 +35,6 @@
 #include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -68,12 +68,6 @@
 			  HB_JUMP_TABLE_PHYS(cpu) + 15);
 }
 
-const static struct of_device_id irq_match[] = {
-	{ .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{}
-};
-
 #ifdef CONFIG_CACHE_L2X0
 static void highbank_l2x0_disable(void)
 {
@@ -84,7 +78,7 @@
 
 static void __init highbank_init_irq(void)
 {
-	of_irq_init(irq_match);
+	irqchip_init();
 
 	if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
 		highbank_scu_map_io();
@@ -131,10 +125,6 @@
 	arch_timer_sched_clock_init();
 }
 
-static struct sys_timer highbank_timer = {
-	.init = highbank_timer_init,
-};
-
 static void highbank_power_off(void)
 {
 	highbank_set_pwr_shutdown();
@@ -211,8 +201,7 @@
 	.smp		= smp_ops(highbank_smp_ops),
 	.map_io		= debug_ll_io_init,
 	.init_irq	= highbank_init_irq,
-	.timer		= &highbank_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= highbank_timer_init,
 	.init_machine	= highbank_init,
 	.dt_compat	= highbank_match,
 	.restart	= highbank_restart,
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
index 4ecc864..8797a70 100644
--- a/arch/arm/mach-highbank/platsmp.c
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -17,9 +17,9 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
 
 #include "core.h"
 
@@ -33,7 +33,7 @@
 static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	highbank_set_cpu_jump(cpu, secondary_startup);
-	gic_raise_softirq(cpumask_of(cpu), 0);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 	return 0;
 }
 
@@ -56,8 +56,6 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 64b40a4..4c9c6f9 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -95,9 +95,6 @@
 config ARCH_MX5
 	bool
 
-config ARCH_MX50
-	bool
-
 config ARCH_MX51
 	bool
 
@@ -164,11 +161,6 @@
 	select CPU_V7
 	select MXC_TZIC
 
-config SOC_IMX50
-	bool
-	select ARCH_MX50
-	select SOC_IMX5
-
 config	SOC_IMX51
 	bool
 	select ARCH_MX5
@@ -738,25 +730,10 @@
 
 if ARCH_MULTI_V7
 
-comment "i.MX5 platforms:"
-
-config MACH_MX50_RDP
-	bool "Support MX50 reference design platform"
-	depends on BROKEN
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select SOC_IMX50
-	help
-	  Include support for MX50 reference design platform (RDP) board. This
-	  includes specific configurations for the board and its peripherals.
-
 comment "i.MX51 machines:"
 
 config MACH_IMX51_DT
 	bool "Support i.MX51 platforms from device tree"
-	select MACH_MX51_BABBAGE
 	select SOC_IMX51
 	help
 	  Include support for Freescale i.MX51 based platforms
@@ -777,19 +754,6 @@
 	  u-boot. This includes specific configurations for the board and its
 	  peripherals.
 
-config MACH_MX51_3DS
-	bool "Support MX51PDK (3DS)"
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_DEBUG_BOARD
-	select SOC_IMX51
-	help
-	  Include support for MX51PDK (3DS) platform. This includes specific
-	  configurations for the board and its peripherals.
-
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 0634b31..240e029 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -88,7 +88,6 @@
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
 
-obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
@@ -103,10 +102,8 @@
 
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
 
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index b27815d..41ba1bb 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -22,10 +22,6 @@
 params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
 initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
 
-zreladdr-$(CONFIG_SOC_IMX50)	+= 0x70008000
-params_phys-$(CONFIG_SOC_IMX50)	:= 0x70000100
-initrd_phys-$(CONFIG_SOC_IMX50)	:= 0x70800000
-
 zreladdr-$(CONFIG_SOC_IMX51)	+= 0x90008000
 params_phys-$(CONFIG_SOC_IMX51)	:= 0x90000100
 initrd_phys-$(CONFIG_SOC_IMX51)	:= 0x90800000
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index c0c4e72..19644f6 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -56,8 +56,6 @@
 
 static void __iomem *ccm_base;
 
-void __init imx6q_clock_map_io(void) { }
-
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 {
 	u32 val = readl_relaxed(ccm_base + CLPCR);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index fa36fb8..76c4200 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -21,7 +21,6 @@
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
-extern void mx50_map_io(void);
 extern void mx51_map_io(void);
 extern void mx53_map_io(void);
 extern void imx1_init_early(void);
@@ -30,7 +29,6 @@
 extern void imx27_init_early(void);
 extern void imx31_init_early(void);
 extern void imx35_init_early(void);
-extern void imx50_init_early(void);
 extern void imx51_init_early(void);
 extern void imx53_init_early(void);
 extern void mxc_init_irq(void __iomem *);
@@ -41,7 +39,6 @@
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
-extern void mx50_init_irq(void);
 extern void mx51_init_irq(void);
 extern void mx53_init_irq(void);
 extern void imx1_soc_init(void);
@@ -50,7 +47,6 @@
 extern void imx27_soc_init(void);
 extern void imx31_soc_init(void);
 extern void imx35_soc_init(void);
-extern void imx50_soc_init(void);
 extern void imx51_soc_init(void);
 extern void imx51_init_late(void);
 extern void imx53_init_late(void);
@@ -109,18 +105,11 @@
 #define imx27_handle_irq avic_handle_irq
 #define imx31_handle_irq avic_handle_irq
 #define imx35_handle_irq avic_handle_irq
-#define imx50_handle_irq tzic_handle_irq
 #define imx51_handle_irq tzic_handle_irq
 #define imx53_handle_irq tzic_handle_irq
-#define imx6q_handle_irq gic_handle_irq
 
 extern void imx_enable_cpu(int cpu, bool enable);
 extern void imx_set_cpu_jump(int cpu, void *jump_addr);
-#ifdef CONFIG_DEBUG_LL
-extern void imx_lluart_map_io(void);
-#else
-static inline void imx_lluart_map_io(void) {}
-#endif
 extern void v7_cpu_resume(void);
 extern u32 *pl310_get_save_ptr(void);
 #ifdef CONFIG_SMP
@@ -139,7 +128,6 @@
 extern void imx_gpc_pre_suspend(void);
 extern void imx_gpc_post_resume(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-extern void imx6q_clock_map_io(void);
 
 extern void imx_cpu_die(unsigned int cpu);
 extern int imx_cpu_kill(unsigned int cpu);
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index d887600..d7ce722 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -22,7 +22,6 @@
 static int mx5_cpu_rev = -1;
 
 #define IIM_SREV 0x24
-#define MX50_HW_ADADIG_DIGPROG	0xB0
 
 static int get_mx51_srev(void)
 {
@@ -108,41 +107,3 @@
 	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx53_revision);
-
-static int get_mx50_srev(void)
-{
-	void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
-	u32 rev;
-
-	if (!anatop) {
-		mx5_cpu_rev = -EINVAL;
-		return 0;
-	}
-
-	rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
-	rev &= 0xff;
-
-	iounmap(anatop);
-	if (rev == 0x0)
-		return IMX_CHIP_REVISION_1_0;
-	else if (rev == 0x1)
-		return IMX_CHIP_REVISION_1_1;
-	return 0;
-}
-
-/*
- * Returns:
- *	the silicon revision of the cpu
- *	-EINVAL - not a mx50
- */
-int mx50_revision(void)
-{
-	if (!cpu_is_mx50())
-		return -EINVAL;
-
-	if (mx5_cpu_rev == -1)
-		mx5_cpu_rev = get_mx50_srev();
-
-	return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx50_revision);
diff --git a/arch/arm/mach-imx/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h
deleted file mode 100644
index 2c29039..0000000
--- a/arch/arm/mach-imx/devices-imx50.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "devices/devices-common.h"
-
-extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
-#define imx50_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
-
-extern const struct imx_fec_data imx50_fec_data;
-#define imx50_add_fec(pdata)	\
-	imx_add_fec(&imx50_fec_data, pdata)
-
-extern const struct imx_imx_i2c_data imx50_imx_i2c_data[];
-#define imx50_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 9a8f1ca..9b9ba1f 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -1,6 +1,6 @@
 config IMX_HAVE_PLATFORM_FEC
 	bool
-	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
+	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
 
 config IMX_HAVE_PLATFORM_FLEXCAN
 	bool
diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
index 2cb188a..63eba08 100644
--- a/arch/arm/mach-imx/devices/platform-fec.c
+++ b/arch/arm/mach-imx/devices/platform-fec.c
@@ -35,12 +35,6 @@
 	imx_fec_data_entry_single(MX35, "imx27-fec");
 #endif
 
-#ifdef CONFIG_SOC_IMX50
-/* i.mx50 has the i.mx25 type fec */
-const struct imx_fec_data imx50_fec_data __initconst =
-	imx_fec_data_entry_single(MX50, "imx25-fec");
-#endif
-
 #ifdef CONFIG_SOC_IMX51
 /* i.mx51 has the i.mx27 type fec */
 const struct imx_fec_data imx51_fec_data __initconst =
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index 8e30e57..57d342e 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -70,16 +70,6 @@
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX50
-const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
-#define imx50_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K)
-	imx50_imx_i2c_data_entry(0, 1),
-	imx50_imx_i2c_data_entry(1, 2),
-	imx50_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
 #define imx51_imx_i2c_data_entry(_id, _hwid)				\
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index 67bf866a..faac4aa 100644
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -94,18 +94,6 @@
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX50
-const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst = {
-#define imx50_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX50, _id, _hwid, SZ_4K)
-	imx50_imx_uart_data_entry(0, 1),
-	imx50_imx_uart_data_entry(1, 2),
-	imx50_imx_uart_data_entry(2, 3),
-	imx50_imx_uart_data_entry(3, 4),
-	imx50_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX50 */
-
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
 #define imx51_imx_uart_data_entry(_id, _hwid)				\
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index 04a5961..e02de18 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -178,7 +178,6 @@
 static struct clock_event_device clockevent_epit = {
 	.name		= "epit",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.set_mode	= epit_set_mode,
 	.set_next_event	= epit_set_next_event,
 	.rating		= 200,
@@ -186,18 +185,10 @@
 
 static int __init epit_clockevent_init(struct clk *timer_clk)
 {
-	unsigned int c = clk_get_rate(timer_clk);
-
-	clockevent_epit.mult = div_sc(c, NSEC_PER_SEC,
-					clockevent_epit.shift);
-	clockevent_epit.max_delta_ns =
-			clockevent_delta2ns(0xfffffffe, &clockevent_epit);
-	clockevent_epit.min_delta_ns =
-			clockevent_delta2ns(0x800, &clockevent_epit);
-
 	clockevent_epit.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_epit);
+	clockevents_config_and_register(&clockevent_epit,
+					clk_get_rate(timer_clk),
+					0x800, 0xfffffffe);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index e1537f9..ff24920 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -15,7 +15,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
 
 #define GPC_IMR1		0x008
 #define GPC_PGC_CPU_PDN		0x2a0
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index 3ce7fa3..911e9b31 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -72,11 +72,6 @@
  *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
  *	X_MEMC	0xb8000000+0x010000	->	0xf5c00000+0x010000
  *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
- * mx50:
- *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
- *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
- *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
- *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
  * mx51:
  *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
  *	IRAM	0x1ffe0000+0x020000	->	0xf4fe0000+0x020000
@@ -108,7 +103,6 @@
 #include "mxc.h"
 
 #include "mx6q.h"
-#include "mx50.h"
 #include "mx51.h"
 #include "mx53.h"
 #include "mx3x.h"
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index e17dfbc..03b65e5 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -22,15 +22,6 @@
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static void __init imx25_timer_init(void)
-{
-	mx25_clocks_init_dt();
-}
-
-static struct sys_timer imx25_timer = {
-	.init = imx25_timer_init,
-};
-
 static const char * const imx25_dt_board_compat[] __initconst = {
 	"fsl,imx25",
 	NULL
@@ -41,7 +32,7 @@
 	.init_early	= imx25_init_early,
 	.init_irq	= mx25_init_irq,
 	.handle_irq	= imx25_handle_irq,
-	.timer		= &imx25_timer,
+	.init_time	= imx25_timer_init,
 	.init_machine	= imx25_dt_init,
 	.dt_compat	= imx25_dt_board_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index ebfae96..c915a49 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -39,26 +39,22 @@
 			     imx27_auxdata_lookup, NULL);
 }
 
-static void __init imx27_timer_init(void)
-{
-	mx27_clocks_init_dt();
-}
-
-static struct sys_timer imx27_timer = {
-	.init = imx27_timer_init,
-};
-
 static const char * const imx27_dt_board_compat[] __initconst = {
 	"fsl,imx27",
 	NULL
 };
 
+static void __init imx27_timer_init(void)
+{
+	mx27_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.map_io		= mx27_map_io,
 	.init_early	= imx27_init_early,
 	.init_irq	= mx27_init_irq,
 	.handle_irq	= imx27_handle_irq,
-	.timer		= &imx27_timer,
+	.init_time	= imx27_timer_init,
 	.init_machine	= imx27_dt_init,
 	.dt_compat	= imx27_dt_board_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
index af476de..b5c04ee 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -38,26 +38,22 @@
 			     imx31_auxdata_lookup, NULL);
 }
 
-static void __init imx31_timer_init(void)
-{
-	mx31_clocks_init_dt();
-}
-
-static struct sys_timer imx31_timer = {
-	.init = imx31_timer_init,
-};
-
 static const char *imx31_dt_board_compat[] __initdata = {
 	"fsl,imx31",
 	NULL
 };
 
+static void __init imx31_dt_timer_init(void)
+{
+	mx31_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
 	.map_io		= mx31_map_io,
 	.init_early	= imx31_init_early,
 	.init_irq	= mx31_init_irq,
 	.handle_irq	= imx31_handle_irq,
-	.timer		= &imx31_timer,
+	.init_time	= imx31_dt_timer_init,
 	.init_machine	= imx31_dt_init,
 	.dt_compat	= imx31_dt_board_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 5ffa40c..e2926a8 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -24,26 +24,22 @@
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static void __init imx51_timer_init(void)
-{
-	mx51_clocks_init_dt();
-}
-
-static struct sys_timer imx51_timer = {
-	.init = imx51_timer_init,
-};
-
 static const char *imx51_dt_board_compat[] __initdata = {
 	"fsl,imx51",
 	NULL
 };
 
+static void __init imx51_timer_init(void)
+{
+	mx51_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.map_io		= mx51_map_io,
 	.init_early	= imx51_init_early,
 	.init_irq	= mx51_init_irq,
 	.handle_irq	= imx51_handle_irq,
-	.timer		= &imx51_timer,
+	.init_time	= imx51_timer_init,
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/iomux-mx50.h b/arch/arm/mach-imx/iomux-mx50.h
deleted file mode 100644
index 00f56e0..0000000
--- a/arch/arm/mach-imx/iomux-mx50.h
+++ /dev/null
@@ -1,977 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_IOMUX_MX50_H__
-#define __MACH_IOMUX_MX50_H__
-
-#include "iomux-v3.h"
-
-#define MX50_ELCDIF_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-
-#define MX50_SD_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_UART_PAD_CTRL	(PAD_CTL_DSE_HIGH | PAD_CTL_PKE)
-
-#define MX50_I2C_PAD_CTRL	(PAD_CTL_ODE | PAD_CTL_DSE_HIGH | \
-					PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
-
-#define MX50_USB_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP)
-
-#define MX50_FEC_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | \
-					PAD_CTL_DSE_HIGH)
-
-#define MX50_OWIRE_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_PUS_100K_UP | PAD_CTL_ODE | \
-					PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
-
-#define MX50_KEYPAD_CTRL        (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_CSPI_SS_PAD	(PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL0__KEY_COL0	IOMUX_PAD(0x2CC, 0x20, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL0__GPIO_4_0	IOMUX_PAD(0x2CC, 0x20, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL0__NANDF_CLE	IOMUX_PAD(0x2CC, 0x20, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW0__KEY_ROW0	IOMUX_PAD(0x2D0, 0x24, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW0__GPIO_4_1	IOMUX_PAD(0x2D0, 0x24, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW0__NANDF_ALE	IOMUX_PAD(0x2D0, 0x24, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL1__KEY_COL1	IOMUX_PAD(0x2D4, 0x28, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL1__GPIO_4_2	IOMUX_PAD(0x2D4, 0x28, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL1__NANDF_CE0	IOMUX_PAD(0x2D4, 0x28, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW1__KEY_ROW1	IOMUX_PAD(0x2D8, 0x2C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW1__GPIO_4_3	IOMUX_PAD(0x2D8, 0x2C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW1__NANDF_CE1	IOMUX_PAD(0x2D8, 0x2C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL2__KEY_COL2	IOMUX_PAD(0x2DC, 0x30, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_COL2__GPIO_4_4	IOMUX_PAD(0x2DC, 0x30, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL2__NANDF_CE2	IOMUX_PAD(0x2DC, 0x30, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW2__KEY_ROW2	IOMUX_PAD(0x2E0, 0x34, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW2__GPIO_4_5	IOMUX_PAD(0x2E0, 0x34, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW2__NANDF_CE3	IOMUX_PAD(0x2E0, 0x34, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL3__KEY_COL3	IOMUX_PAD(0x2E4, 0x38, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL3__GPIO_4_6	IOMUX_PAD(0x2E4, 0x38, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL3__NANDF_READY	IOMUX_PAD(0x2E4, 0x38, 2, 0x7b4, 0, PAD_CTL_PKE | \
-							PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_KEY_COL3__SDMA_EXT0	IOMUX_PAD(0x2E4, 0x38, 6, 0x7b8, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_KEY_ROW3__KEY_ROW3	IOMUX_PAD(0x2E8, 0x3C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW3__GPIO_4_7	IOMUX_PAD(0x2E8, 0x3C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW3__NANDF_DQS	IOMUX_PAD(0x2E8, 0x3C, 2, 0x7b0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_KEY_ROW3__SDMA_EXT1	IOMUX_PAD(0x2E8, 0x3C, 6, 0x7bc, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C1_SCL__I2C1_SCL	IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C1_SCL__GPIO_6_18	IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C1_SCL__UART2_TXD	IOMUX_PAD(0x2EC, 0x40, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-
-#define MX50_PAD_I2C1_SDA__I2C1_SDA	IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C1_SDA__GPIO_6_19	IOMUX_PAD(0x2F0, 0x44, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C1_SDA__UART2_RXD	IOMUX_PAD(0x2F0, 0x44, 2, 0x7cc, 1, MX50_UART_PAD_CTRL)
-
-#define MX50_PAD_I2C2_SCL__I2C2_SCL	IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__GPIO_6_20	IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__UART2_CTS	IOMUX_PAD(0x2F4, 0x48, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__DCDC_OK	IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C2_SDA__I2C2_SDA	IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__GPIO_6_21	IOMUX_PAD(0x2F8, 0x4C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__UART2_RTS	IOMUX_PAD(0x2F8, 0x4C, 2, 0x7c8, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__PWRSTABLE	IOMUX_PAD(0x2F8, 0x4C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C3_SCL__I2C3_SCL	IOMUX_PAD(0x2FC, 0x50, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__GPIO_6_22	IOMUX_PAD(0x2FC, 0x50, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__FEC_MDC	IOMUX_PAD(0x2FC, 0x50, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_I2C3_SCL__PMIC_RDY	IOMUX_PAD(0x2FC, 0x50, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__GPT_CAPIN1	IOMUX_PAD(0x2FC, 0x50, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__USBOTG_OC	IOMUX_PAD(0x2FC, 0x50, 7, 0x7E8, 0, MX50_USB_PAD_CTRL)
-
-#define MX50_PAD_I2C3_SDA__I2C3_SDA	IOMUX_PAD(0x300, 0x54, IOMUX_CONFIG_SION, 0x0, 0, \
-								MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__GPIO_6_23	IOMUX_PAD(0x300, 0x54, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__FEC_MDIO	IOMUX_PAD(0x300, 0x54, 2, 0x774, 0, MX50_FEC_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__PWRFAIL_INT	IOMUX_PAD(0x300, 0x54, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__ALARM_DEB	IOMUX_PAD(0x300, 0x54, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__GPT_CAPIN1	IOMUX_PAD(0x300, 0x54, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__USBOTG_PWR	IOMUX_PAD(0x300, 0x54, 7, 0x0, 0, \
-							PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_PWM1__PWM1_PWMO	IOMUX_PAD(0x304, 0x58, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM1__GPIO_6_24	IOMUX_PAD(0x304, 0x58, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM1__USBOTG_OC	IOMUX_PAD(0x304, 0x58, 2, 0x7E8, 1, MX50_USB_PAD_CTRL)
-#define MX50_PAD_PWM1__GPT_CMPOUT1	IOMUX_PAD(0x304, 0x58, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PWM2__PWM2_PWMO	IOMUX_PAD(0x308, 0x5C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__GPIO_6_25	IOMUX_PAD(0x308, 0x5C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__USBOTG_PWR	IOMUX_PAD(0x308, 0x5C, 2, 0x0, 0, \
-							PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-#define MX50_PAD_PWM2__DCDC_PWM		IOMUX_PAD(0x308, 0x5C, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__GPT_CMPOUT2	IOMUX_PAD(0x308, 0x5C, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__ANY_PU_RST	IOMUX_PAD(0x308, 0x5C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_OWIRE__OWIRE		IOMUX_PAD(0x30C, 0x60, 0, 0x0, 0, MX50_OWIRE_PAD_CTRL)
-#define MX50_PAD_OWIRE__GPIO_6_26	IOMUX_PAD(0x30C, 0x60, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__USBH1_OC	IOMUX_PAD(0x30C, 0x60, 2, 0x0, 0, MX50_USB_PAD_CTRL)
-#define MX50_PAD_OWIRE__SSI_EXT1_CLK	IOMUX_PAD(0x30C, 0x60, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__EPDC_PWRIRQ	IOMUX_PAD(0x30C, 0x60, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__GPT_CMPOUT3	IOMUX_PAD(0x30C, 0x60, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPITO__EPITO		IOMUX_PAD(0x310, 0x64, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__GPIO_6_27	IOMUX_PAD(0x310, 0x64, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__USBH1_PWR	IOMUX_PAD(0x310, 0x64, 2, 0x0, 0, \
-							PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EPITO__SSI_EXT2_CLK	IOMUX_PAD(0x310, 0x64, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__TOG_EN		IOMUX_PAD(0x310, 0x64, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__GPT_CLKIN	IOMUX_PAD(0x310, 0x64, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_WDOG__WDOG		IOMUX_PAD(0x314, 0x68, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__GPIO_6_28	IOMUX_PAD(0x314, 0x68, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__WDOG_RST		IOMUX_PAD(0x314, 0x68, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__XTAL32K		IOMUX_PAD(0x314, 0x68, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXFS__SSI_TXFS	IOMUX_PAD(0x318, 0x6C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXFS__GPIO_6_0	IOMUX_PAD(0x318, 0x6C, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXC__SSI_TXC	IOMUX_PAD(0x31C, 0x70, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXC__GPIO_6_1	IOMUX_PAD(0x31C, 0x70, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXD__SSI_TXD	IOMUX_PAD(0x320, 0x74, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXD__GPIO_6_2	IOMUX_PAD(0x320, 0x74, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXD__CSPI_RDY	IOMUX_PAD(0x320, 0x74, 4, 0x6e8, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_RXD__SSI_RXD	IOMUX_PAD(0x324, 0x78, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXD__GPIO_6_3	IOMUX_PAD(0x324, 0x78, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXD__CSPI_SS3	IOMUX_PAD(0x324, 0x78, 4, 0x6f4, 0, MX50_CSPI_SS_PAD)
-
-#define MX50_PAD_SSI_RXFS__AUD3_RXFS	IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__GPIO_6_4	IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__UART5_TXD	IOMUX_PAD(0x328, 0x7C, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__WEIM_D6	IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__CSPI_SS2	IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_SSI_RXFS__FEC_COL	IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SSI_RXFS__FEC_MDC	IOMUX_PAD(0x328, 0x7C, 6, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_SSI_RXC__AUD3_RXC	IOMUX_PAD(0x32C, 0x80, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__GPIO_6_5	IOMUX_PAD(0x32C, 0x80, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__UART5_RXD	IOMUX_PAD(0x32C, 0x80, 2, 0x7e4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__WEIM_D7	IOMUX_PAD(0x32C, 0x80, 3, 0x808, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__CSPI_SS1	IOMUX_PAD(0x32C, 0x80, 4, 0x6ec, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_SSI_RXC__FEC_RX_CLK	IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__FEC_MDIO	IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL)
-
-#define MX50_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x330, 0x84, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_TXD__GPIO_6_6	IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RXD__GPIO_6_7	IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x338, 0x8C, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__GPIO_6_8	IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__UART5_TXD	IOMUX_PAD(0x338, 0x8C, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__SD4_D4	IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__SD4_CMD	IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__GPIO_6_9	IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__UART5_RXD	IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__SD4_D5	IOMUX_PAD(0x33C, 0x90, 4, 0x764, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__SD4_CLK	IOMUX_PAD(0x33C, 0x90, 5, 0x748, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x340, 0x94, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__GPIO_6_10	IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__SD4_D6	IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__SD4_D4	IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x344, 0x98, 0, 0x7cc, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__GPIO_6_11	IOMUX_PAD(0x344, 0x98, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__SD4_D7	IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__SD4_D5	IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x348, 0x9C, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__GPIO_6_12	IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__SD4_CMD	IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__SD4_D6	IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x34C, 0xA0, 0, 0x7c8, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__GPIO_6_13	IOMUX_PAD(0x34C, 0xA0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__SD4_CLK	IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__SD4_D7	IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART3_TXD__UART3_TXD	IOMUX_PAD(0x350, 0xA4, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__GPIO_6_14	IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD1_D4	IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD4_D0	IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD2_WP	IOMUX_PAD(0x350, 0xA4, 5, 0x744, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__WEIM_D12	IOMUX_PAD(0x350, 0xA4, 6, 0x81c, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART3_RXD__UART3_RXD	IOMUX_PAD(0x354, 0xA8, 0, 0x7d4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__GPIO_6_15	IOMUX_PAD(0x354, 0xA8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD1_D5	IOMUX_PAD(0x354, 0xA8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD4_D1	IOMUX_PAD(0x354, 0xA8, 4, 0x754, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD2_CD	IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__WEIM_D13	IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART4_TXD__UART4_TXD	IOMUX_PAD(0x358, 0xAC, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__GPIO_6_16	IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__UART3_CTS	IOMUX_PAD(0x358, 0xAC, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD1_D6	IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD4_D2	IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD2_LCTL	IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__WEIM_D14	IOMUX_PAD(0x358, 0xAC, 6, 0x824, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART4_RXD__UART4_RXD	IOMUX_PAD(0x35C, 0xB0, 0, 0x7dc, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__GPIO_6_17	IOMUX_PAD(0x35C, 0xB0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__UART3_RTS	IOMUX_PAD(0x35C, 0xB0, 2, 0x7d0, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD1_D7	IOMUX_PAD(0x35C, 0xB0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD4_D3	IOMUX_PAD(0x35C, 0xB0, 4, 0x75c, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD1_LCTL	IOMUX_PAD(0x35C, 0xB0, 5, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__WEIM_D15	IOMUX_PAD(0x35C, 0xB0, 6, 0x828, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_SCLK__CSPI_SCLK	IOMUX_PAD(0x360, 0xB4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_SCLK__GPIO_4_8	IOMUX_PAD(0x360, 0xB4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_MOSI__CSPI_MOSI	IOMUX_PAD(0x364, 0xB8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_MOSI__GPIO_4_9	IOMUX_PAD(0x364, 0xB8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_MISO__CSPI_MISO	IOMUX_PAD(0x368, 0xBC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_MISO__GPIO_4_10	IOMUX_PAD(0x368, 0xBC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_SS0__CSPI_SS0	IOMUX_PAD(0x36C, 0xC0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_CSPI_SS0__GPIO_4_11	IOMUX_PAD(0x36C, 0xC0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK	IOMUX_PAD(0x370, 0xC4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__GPIO_4_12		IOMUX_PAD(0x370, 0xC4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY		IOMUX_PAD(0x370, 0xC4, 2, 0x6e8, 1, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY	IOMUX_PAD(0x370, 0xC4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__UART3_RTS		IOMUX_PAD(0x370, 0xC4, 4, 0x7d0, 2, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE6	IOMUX_PAD(0x370, 0xC4, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__WEIM_D8		IOMUX_PAD(0x370, 0xC4, 7, 0x80c, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI	IOMUX_PAD(0x374, 0xC8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__GPIO_4_13		IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1		IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1	IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MOSI__UART3_CTS		IOMUX_PAD(0x374, 0xC8, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7	IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__WEIM_D9		IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO	IOMUX_PAD(0x378, 0xCC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__GPIO_4_14		IOMUX_PAD(0x378, 0xCC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__CSPI_SS2		IOMUX_PAD(0x378, 0xCC, 2, 0x6f0, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2	IOMUX_PAD(0x378, 0xCC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MISO__UART4_RTS		IOMUX_PAD(0x378, 0xCC, 4, 0x7d8, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE8	IOMUX_PAD(0x378, 0xCC, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__WEIM_D10		IOMUX_PAD(0x378, 0xCC, 7, 0x814, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0		IOMUX_PAD(0x37C, 0xD0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__GPIO_4_15		IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_ECSPI1_SS0__CSPI_SS3		IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3		IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__UART4_CTS		IOMUX_PAD(0x37C, 0xD0, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9		IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SS0__WEIM_D11		IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK	IOMUX_PAD(0x380, 0xD4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__GPIO_4_16		IOMUX_PAD(0x380, 0xD4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR		IOMUX_PAD(0x380, 0xD4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY	IOMUX_PAD(0x380, 0xD4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__UART5_RTS		IOMUX_PAD(0x380, 0xD4, 4, 0x7e0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK	IOMUX_PAD(0x380, 0xD4, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__NANDF_CEN4	IOMUX_PAD(0x380, 0xD4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__WEIM_D8		IOMUX_PAD(0x380, 0xD4, 7, 0x80c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI	IOMUX_PAD(0x384, 0xD8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__GPIO_4_17		IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD		IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1	IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_MOSI__UART5_CTS		IOMUX_PAD(0x384, 0xD8, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN		IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5	IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__WEIM_D9		IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO	IOMUX_PAD(0x388, 0xDC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__GPIO_4_18		IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS		IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2	IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_MISO__UART5_TXD		IOMUX_PAD(0x388, 0xDC, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC	IOMUX_PAD(0x388, 0xDC, 5, 0x73c, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__NANDF_CEN6	IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__WEIM_D10		IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0		IOMUX_PAD(0x38C, 0xE0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_SS0__GPIO_4_19		IOMUX_PAD(0x38C, 0xE0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS		IOMUX_PAD(0x38C, 0xE0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ECSPI1_SS3		IOMUX_PAD(0x38C, 0xE0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_SS0__UART5_RXD		IOMUX_PAD(0x38C, 0xE0, 4, 0x7e4, 5, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC	IOMUX_PAD(0x38C, 0xE0, 5, 0x6f8, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__NANDF_CEN7		IOMUX_PAD(0x38C, 0xE0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__WEIM_D11		IOMUX_PAD(0x38C, 0xE0, 7, 0x818, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x390, 0xE4, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_CLK__GPIO_5_0	IOMUX_PAD(0x390, 0xE4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_CLK__CLKO		IOMUX_PAD(0x390, 0xE4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x394, 0xE8, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_CMD__GPIO_5_1	IOMUX_PAD(0x394, 0xE8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_CMD__CLKO2		IOMUX_PAD(0x394, 0xE8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D0__SD1_D0		IOMUX_PAD(0x398, 0xEC, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D0__GPIO_5_2	IOMUX_PAD(0x398, 0xEC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D0__PLL1_BYP	IOMUX_PAD(0x398, 0xEC, 7, 0x6dc, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D1__SD1_D1		IOMUX_PAD(0x39C, 0xF0, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D1__GPIO_5_3	IOMUX_PAD(0x39C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D1__PLL2_BYP	IOMUX_PAD(0x39C, 0xF0, 7, 0x6e0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D2__SD1_D2		IOMUX_PAD(0x3A0, 0xF4, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D2__GPIO_5_4	IOMUX_PAD(0x3A0, 0xF4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D2__PLL3_BYP	IOMUX_PAD(0x3A0, 0xF4, 7, 0x6e4, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D3__SD1_D3		IOMUX_PAD(0x3A4, 0xF8, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D3__GPIO_5_5	IOMUX_PAD(0x3A4, 0xF8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_CLK__SD2_CLK	IOMUX_PAD(0x3A8, 0xFC, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CLK__GPIO_5_6	IOMUX_PAD(0x3A8, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CLK__MSHC_SCLK	IOMUX_PAD(0x3A8, 0xFC, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_SD2_CMD__SD2_CMD	IOMUX_PAD(0x3AC, 0x100, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CMD__GPIO_5_7	IOMUX_PAD(0x3AC, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CMD__MSHC_BS	IOMUX_PAD(0x3AC, 0x100, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_SD2_D0__SD2_D0		IOMUX_PAD(0x3B0, 0x104, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D0__GPIO_5_8	IOMUX_PAD(0x3B0, 0x104, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D0__MSHC_D0	IOMUX_PAD(0x3B0, 0x104, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D0__KEY_COL4	IOMUX_PAD(0x3B0, 0x104, 3, 0x790, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D1__SD2_D1		IOMUX_PAD(0x3B4, 0x108, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D1__GPIO_5_9	IOMUX_PAD(0x3B4, 0x108, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D1__MSHC_D1	IOMUX_PAD(0x3B4, 0x108, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D1__KEY_ROW4	IOMUX_PAD(0x3B4, 0x108, 3, 0x7a0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D2__SD2_D2		IOMUX_PAD(0x3B8, 0x10C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D2__GPIO_5_10	IOMUX_PAD(0x3B8, 0x10C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D2__MSHC_D2	IOMUX_PAD(0x3B8, 0x10C, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D2__KEY_COL5	IOMUX_PAD(0x3B8, 0x10C, 3, 0x794, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D3__SD2_D3		IOMUX_PAD(0x3BC, 0x110, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D3__GPIO_5_11	IOMUX_PAD(0x3BC, 0x110, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D3__MSHC_D3	IOMUX_PAD(0x3BC, 0x110, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D3__KEY_ROW5	IOMUX_PAD(0x3BC, 0x110, 3, 0x7a4, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D4__SD2_D4		IOMUX_PAD(0x3C0, 0x114, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D4__GPIO_5_12	IOMUX_PAD(0x3C0, 0x114, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__AUD4_RXFS	IOMUX_PAD(0x3C0, 0x114, 2, 0x6d0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__KEY_COL6	IOMUX_PAD(0x3C0, 0x114, 3, 0x798, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__WEIM_D0	IOMUX_PAD(0x3C0, 0x114, 4, 0x7ec, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__CCM_OUT0	IOMUX_PAD(0x3C0, 0x114, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D5__SD2_D5		IOMUX_PAD(0x3C4, 0x118, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D5__GPIO_5_13	IOMUX_PAD(0x3C4, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__AUD4_RXC	IOMUX_PAD(0x3C4, 0x118, 2, 0x6cc, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__KEY_ROW6	IOMUX_PAD(0x3C4, 0x118, 3, 0x7a8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__WEIM_D1	IOMUX_PAD(0x3C4, 0x118, 4, 0x7f0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__CCM_OUT1	IOMUX_PAD(0x3C4, 0x118, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D6__SD2_D6		IOMUX_PAD(0x3C8, 0x11C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D6__GPIO_5_14	IOMUX_PAD(0x3C8, 0x11C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__AUD4_RXD	IOMUX_PAD(0x3C8, 0x11C, 2, 0x6c4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__KEY_COL7	IOMUX_PAD(0x3C8, 0x11C, 3, 0x79c, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__WEIM_D2	IOMUX_PAD(0x3C8, 0x11C, 4, 0x7f4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__CCM_OUT2	IOMUX_PAD(0x3C8, 0x11C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D7__SD2_D7		IOMUX_PAD(0x3CC, 0x120, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D7__GPIO_5_15	IOMUX_PAD(0x3CC, 0x120, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__AUD4_TXFS	IOMUX_PAD(0x3CC, 0x120, 2, 0x6d8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__KEY_ROW7	IOMUX_PAD(0x3CC, 0x120, 3, 0x7ac, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__WEIM_D3	IOMUX_PAD(0x3CC, 0x120, 4, 0x7f8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__CCM_STOP	IOMUX_PAD(0x3CC, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_WP__SD2_WP		IOMUX_PAD(0x3D0, 0x124, 0, 0x744, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_WP__GPIO_5_16	IOMUX_PAD(0x3D0, 0x124, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__AUD4_TXD	IOMUX_PAD(0x3D0, 0x124, 2, 0x6c8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__WEIM_D4	IOMUX_PAD(0x3D0, 0x124, 4, 0x7fc, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__CCM_WAIT	IOMUX_PAD(0x3D0, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_CD__SD2_CD		IOMUX_PAD(0x3D4, 0x128, 0, 0x740, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CD__GPIO_5_17	IOMUX_PAD(0x3D4, 0x128, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__AUD4_TXC	IOMUX_PAD(0x3D4, 0x128, 2, 0x6d4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__WEIM_D5	IOMUX_PAD(0x3D4, 0x128, 4, 0x800, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__CCM_REF_EN	IOMUX_PAD(0x3D4, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_ON_REQ__PMIC_ON_REQ	IOMUX_PAD(0x3D8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ	IOMUX_PAD(0x3DC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_PORT_B__PMIC_PORT_B	IOMUX_PAD(0x3E0, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_BOOT_MODE1__PMIC_BOOT_MODE1	IOMUX_PAD(0x3E4, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_RESET_IN_B__PMIC_RESET_IN_B	IOMUX_PAD(0x3E8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_BOOT_MODE0__PMIC_BOOT_MODE0	IOMUX_PAD(0x3EC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_TEST_MODE__PMIC_TEST_MODE	IOMUX_PAD(0x3F0, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TMS__PMIC_JTAG_TMS	IOMUX_PAD(0x3F4, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_MOD__PMIC_JTAG_MOD	IOMUX_PAD(0x3F8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TRSTB__PMIC_JTAG_TRSTB	IOMUX_PAD(0x3FC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TDI__PMIC_JTAG_TDI	IOMUX_PAD(0x400, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TCK__PMIC_JTAG_TCK	IOMUX_PAD(0x404, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TDO__PMIC_JTAG_TDO	IOMUX_PAD(0x408, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D0__DISP_D0	IOMUX_PAD(0x40C, 0x12C, 0, 0x6fc, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D0__GPIO_2_0	IOMUX_PAD(0x40C, 0x12C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D0__FEC_TXCLK	IOMUX_PAD(0x40C, 0x12C, 2, 0x78c, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-
-#define MX50_PAD_DISP_D1__DISP_D1	IOMUX_PAD(0x410, 0x130, 0, 0x700, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D1__GPIO_2_1	IOMUX_PAD(0x410, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D1__FEC_RX_ER	IOMUX_PAD(0x410, 0x130, 2, 0x788, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D1__WEIM_A17	IOMUX_PAD(0x410, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D2__DISP_D2	IOMUX_PAD(0x414, 0x134, 0, 0x704, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D2__GPIO_2_2	IOMUX_PAD(0x414, 0x134, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D2__FEC_RX_DV	IOMUX_PAD(0x414, 0x134, 2, 0x784, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D2__WEIM_A18	IOMUX_PAD(0x414, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D3__DISP_D3	IOMUX_PAD(0x418, 0x138, 0, 0x708, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D3__GPIO_2_3	IOMUX_PAD(0x418, 0x138, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D3__FEC_RXD1	IOMUX_PAD(0x418, 0x138, 2, 0x77C, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D3__WEIM_A19	IOMUX_PAD(0x418, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D3__FEC_COL	IOMUX_PAD(0x418, 0x138, 4, 0x770, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D4__DISP_D4	IOMUX_PAD(0x41C, 0x13C, 0, 0x70c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D4__GPIO_2_4	IOMUX_PAD(0x41C, 0x13C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D4__FEC_RXD0	IOMUX_PAD(0x41C, 0x13C, 2, 0x778, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D4__WEIM_A20	IOMUX_PAD(0x41C, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D5__DISP_D5	IOMUX_PAD(0x420, 0x140, 0, 0x710, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D5__GPIO_2_5	IOMUX_PAD(0x420, 0x140, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D5__FEC_TX_EN	IOMUX_PAD(0x420, 0x140, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D5__WEIM_A21	IOMUX_PAD(0x420, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D6__DISP_D6	IOMUX_PAD(0x424, 0x144, 0, 0x714, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D6__GPIO_2_6	IOMUX_PAD(0x424, 0x144, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D6__FEC_TXD1	IOMUX_PAD(0x424, 0x144, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D6__WEIM_A22	IOMUX_PAD(0x424, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D6__FEC_RX_CLK	IOMUX_PAD(0x424, 0x144, 4, 0x780, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D7__DISP_D7	IOMUX_PAD(0x428, 0x148, 0, 0x718, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D7__GPIO_2_7	IOMUX_PAD(0x428, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D7__FEC_TXD0	IOMUX_PAD(0x428, 0x148, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D7__WEIM_A23	IOMUX_PAD(0x428, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
-
-
-#define MX50_PAD_DISP_WR__ELCDIF_WR	IOMUX_PAD(0x42C, 0x14C, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_WR__GPIO_2_16	IOMUX_PAD(0x42C, 0x14C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_WR__ELCDIF_PIXCLK	IOMUX_PAD(0x42C, 0x14C, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_WR__WEIM_A24	IOMUX_PAD(0x42C, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RD__ELCDIF_RD	IOMUX_PAD(0x430, 0x150, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RD__GPIO_2_19	IOMUX_PAD(0x430, 0x150, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RD__ELCDIF_EN	IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RD__WEIM_A25	IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RS__ELCDIF_RS	IOMUX_PAD(0x434, 0x154, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RS__GPIO_2_17	IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RS__ELCDIF_VSYNC	IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RS__WEIM_A26	IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_CS__ELCDIF_CS	IOMUX_PAD(0x438, 0x158, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_CS__GPIO_2_21	IOMUX_PAD(0x438, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_CS__ELCDIF_HSYNC	IOMUX_PAD(0x438, 0x158, 2, 0x6f8, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_CS__WEIM_A27	IOMUX_PAD(0x438, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_CS__WEIM_CS3	IOMUX_PAD(0x438, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_BUSY__ELCDIF_HSYNC	IOMUX_PAD(0x43C, 0x15C, 0, 0x6f8, 2, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_BUSY__GPIO_2_18		IOMUX_PAD(0x43C, 0x15C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_BUSY__WEIM_CS3		IOMUX_PAD(0x43C, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RESET__ELCDIF_RST	IOMUX_PAD(0x440, 0x160, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RESET__GPIO_2_20	IOMUX_PAD(0x440, 0x160, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RESET__WEIM_CS3	IOMUX_PAD(0x440, 0x160, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_CMD__SD3_CMD	IOMUX_PAD(0x444, 0x164, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_CMD__GPIO_5_18	IOMUX_PAD(0x444, 0x164, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_CMD__NANDF_WRN	IOMUX_PAD(0x444, 0x164, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_CMD__SSP_CMD	IOMUX_PAD(0x444, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_CLK__SD3_CLK	IOMUX_PAD(0x448, 0x168, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_CLK__GPIO_5_19	IOMUX_PAD(0x448, 0x168, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_CLK__NANDF_RDN	IOMUX_PAD(0x448, 0x168, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_CLK__SSP_CLK	IOMUX_PAD(0x448, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D0__SD3_D0		IOMUX_PAD(0x44C, 0x16C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D0__GPIO_5_20	IOMUX_PAD(0x44C, 0x16C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D0__NANDF_D4	IOMUX_PAD(0x44C, 0x16C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D0__SSP_D0		IOMUX_PAD(0x44C, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_D0__PLL1_BYP	IOMUX_PAD(0x44C, 0x16C, 7, 0x6dc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D1__SD3_D1		IOMUX_PAD(0x450, 0x170, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D1__GPIO_5_21	IOMUX_PAD(0x450, 0x170, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D1__NANDF_D5	IOMUX_PAD(0x450, 0x170, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D1__PLL2_BYP	IOMUX_PAD(0x450, 0x170, 7, 0x6e0, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D2__SD3_D2		IOMUX_PAD(0x454, 0x174, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D2__GPIO_5_22	IOMUX_PAD(0x454, 0x174, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D2__NANDF_D6	IOMUX_PAD(0x454, 0x174, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D2__SSP_D2		IOMUX_PAD(0x454, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_D2__PLL3_BYP	IOMUX_PAD(0x454, 0x174, 7, 0x6e4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D3__SD3_D3		IOMUX_PAD(0x458, 0x178, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D3__GPIO_5_23	IOMUX_PAD(0x458, 0x178, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D3__NANDF_D7	IOMUX_PAD(0x458, 0x178, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D3__SSP_D3		IOMUX_PAD(0x458, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D4__SD3_D4		IOMUX_PAD(0x45C, 0x17C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D4__GPIO_5_24	IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D4__NANDF_D0	IOMUX_PAD(0x45C, 0x17C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D4__SSP_D4		IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D5__SD3_D5		IOMUX_PAD(0x460, 0x180, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D5__GPIO_5_25	IOMUX_PAD(0x460, 0x180, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D5__NANDF_D1	IOMUX_PAD(0x460, 0x180, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D5__SSP_D5		IOMUX_PAD(0x460, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D6__SD3_D6		IOMUX_PAD(0x464, 0x184, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D6__GPIO_5_26	IOMUX_PAD(0x464, 0x184, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D6__NANDF_D2	IOMUX_PAD(0x464, 0x184, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D6__SSP_D6		IOMUX_PAD(0x464, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D7__SD3_D7		IOMUX_PAD(0x468, 0x188, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D7__GPIO_5_27	IOMUX_PAD(0x468, 0x188, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D7__NANDF_D3	IOMUX_PAD(0x468, 0x188, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D7__SSP_D7		IOMUX_PAD(0x468, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_WP__SD3_WP		IOMUX_PAD(0x46C, 0x18C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_WP__GPIO_5_28	IOMUX_PAD(0x46C, 0x18C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_WP__NANDF_RESETN	IOMUX_PAD(0x46C, 0x18C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_WP__SSP_CD		IOMUX_PAD(0x46C, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_WP__SD4_LCTL	IOMUX_PAD(0x46C, 0x18C, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_WP__WEIM_CS3	IOMUX_PAD(0x46C, 0x18C, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D8__DISP_D8	IOMUX_PAD(0x470, 0x190, 0, 0x71c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D8__GPIO_2_8	IOMUX_PAD(0x470, 0x190, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__NANDF_CLE	IOMUX_PAD(0x470, 0x190, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__SD1_LCTL	IOMUX_PAD(0x470, 0x190, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D8__SD4_CMD	IOMUX_PAD(0x470, 0x190, 4, 0x74c, 2, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D8__KEY_COL4	IOMUX_PAD(0x470, 0x190, 5, 0x790, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__FEC_TX_CLK	IOMUX_PAD(0x470, 0x190, 6, 0x78c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D9__DISP_D9	IOMUX_PAD(0x474, 0x194, 0, 0x720, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D9__GPIO_2_9	IOMUX_PAD(0x474, 0x194, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__NANDF_ALE	IOMUX_PAD(0x474, 0x194, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__SD2_LCTL	IOMUX_PAD(0x474, 0x194, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D9__SD4_CLK	IOMUX_PAD(0x474, 0x194, 4, 0x748, 2, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D9__KEY_ROW4	IOMUX_PAD(0x474, 0x194, 5, 0x7a0, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__FEC_RX_ER	IOMUX_PAD(0x474, 0x194, 6, 0x788, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D10__DISP_D10	IOMUX_PAD(0x478, 0x198, 0, 0x724, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D10__GPIO_2_10	IOMUX_PAD(0x478, 0x198, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__NANDF_CEN0	IOMUX_PAD(0x478, 0x198, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__SD3_LCTL	IOMUX_PAD(0x478, 0x198, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D10__SD4_D0	IOMUX_PAD(0x478, 0x198, 4, 0x750, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D10__KEY_COL5	IOMUX_PAD(0x478, 0x198, 5, 0x794, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__FEC_RX_DV	IOMUX_PAD(0x478, 0x198, 6, 0x784, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D11__DISP_D11	IOMUX_PAD(0x47C, 0x19C, 0, 0x728, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D11__GPIO_2_11	IOMUX_PAD(0x47C, 0x19C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__NANDF_CEN1	IOMUX_PAD(0x47C, 0x19C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__SD4_D1	IOMUX_PAD(0x47C, 0x19C, 4, 0x754, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D11__KEY_ROW5	IOMUX_PAD(0x47C, 0x19C, 5, 0x7a4, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__FEC_RDAT1	IOMUX_PAD(0x47C, 0x19C, 6, 0x77c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D12__DISP_D12	IOMUX_PAD(0x480, 0x1A0, 0, 0x72c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D12__GPIO_2_12	IOMUX_PAD(0x480, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__NANDF_CEN2	IOMUX_PAD(0x480, 0x1A0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__SD1_CD	IOMUX_PAD(0x480, 0x1A0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D12__SD4_D2	IOMUX_PAD(0x480, 0x1A0, 4, 0x758, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D12__KEY_COL6	IOMUX_PAD(0x480, 0x1A0, 5, 0x798, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__FEC_RDAT0	IOMUX_PAD(0x480, 0x1A0, 6, 0x778, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D13__DISP_D13	IOMUX_PAD(0x484, 0x1A4, 0, 0x730, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D13__GPIO_2_13	IOMUX_PAD(0x484, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__NANDF_CEN3	IOMUX_PAD(0x484, 0x1A4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__SD3_CD	IOMUX_PAD(0x484, 0x1A4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D13__SD4_D3	IOMUX_PAD(0x484, 0x1A4, 4, 0x75c, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D13__KEY_ROW6	IOMUX_PAD(0x484, 0x1A4, 5, 0x7a8, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__FEC_TX_EN	IOMUX_PAD(0x484, 0x1A4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D14__DISP_D14	IOMUX_PAD(0x488, 0x1A8, 0, 0x734, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D14__GPIO_2_14	IOMUX_PAD(0x488, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__NANDF_RDY0	IOMUX_PAD(0x488, 0x1A8, 2, 0x7b4, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__SD1_WP	IOMUX_PAD(0x488, 0x1A8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D14__SD4_WP	IOMUX_PAD(0x488, 0x1A8, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D14__KEY_COL7	IOMUX_PAD(0x488, 0x1A8, 5, 0x79c, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__FEC_TDAT1	IOMUX_PAD(0x488, 0x1A8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D15__DISP_D15	IOMUX_PAD(0x48C, 0x1AC, 0, 0x738, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D15__GPIO_2_15	IOMUX_PAD(0x48C, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__NANDF_DQS	IOMUX_PAD(0x48C, 0x1AC, 2, 0x7b0, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__SD3_RST	IOMUX_PAD(0x48C, 0x1AC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D15__SD4_CD	IOMUX_PAD(0x48C, 0x1AC, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D15__KEY_ROW7	IOMUX_PAD(0x48C, 0x1AC, 5, 0x7ac, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__FEC_TDAT0	IOMUX_PAD(0x48C, 0x1AC, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D0__EPDC_D0	IOMUX_PAD(0x54C, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__GPIO_3_0	IOMUX_PAD(0x54C, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__WEIM_D0	IOMUX_PAD(0x54C, 0x1B0, 2, 0x7ec, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__ELCDIF_RS	IOMUX_PAD(0x54C, 0x1B0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__ELCDIF_PIXCLK	IOMUX_PAD(0x54C, 0x1B0, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D1__EPDC_D1	IOMUX_PAD(0x550, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__GPIO_3_1	IOMUX_PAD(0x550, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__WEIM_D1	IOMUX_PAD(0x550, 0x1B4, 2, 0x7f0, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__ELCDIF_CS	IOMUX_PAD(0x550, 0x1B4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__ELCDIF_EN	IOMUX_PAD(0x550, 0x1B4, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D2__EPDC_D2	IOMUX_PAD(0x554, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__GPIO_3_2	IOMUX_PAD(0x554, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__WEIM_D2	IOMUX_PAD(0x554, 0x1B8, 2, 0x7f4, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__ELCDIF_WR	IOMUX_PAD(0x554, 0x1B8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC	IOMUX_PAD(0x554, 0x1B8, 4, 0x73c, 2, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D3__EPDC_D3	IOMUX_PAD(0x558, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__GPIO_3_3	IOMUX_PAD(0x558, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__WEIM_D3	IOMUX_PAD(0x558, 0x1BC, 2, 0x7f8, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__ELCDIF_RD	IOMUX_PAD(0x558, 0x1BC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC	IOMUX_PAD(0x558, 0x1BC, 4, 0x6f8, 3, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D4__EPDC_D4	IOMUX_PAD(0x55C, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D4__GPIO_3_4	IOMUX_PAD(0x55C, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D4__WEIM_D4	IOMUX_PAD(0x55C, 0x1C0, 2, 0x7fc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D5__EPDC_D5	IOMUX_PAD(0x560, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D5__GPIO_3_5	IOMUX_PAD(0x560, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D5__WEIM_D5	IOMUX_PAD(0x560, 0x1C4, 2, 0x800, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D6__EPDC_D6	IOMUX_PAD(0x564, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D6__GPIO_3_6	IOMUX_PAD(0x564, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D6__WEIM_D6	IOMUX_PAD(0x564, 0x1C8, 2, 0x804, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D7__EPDC_D7	IOMUX_PAD(0x568, 0x1CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D7__GPIO_3_7	IOMUX_PAD(0x568, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D7__WEIM_D7	IOMUX_PAD(0x568, 0x1CC, 2, 0x808, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D8__EPDC_D8	IOMUX_PAD(0x56C, 0x1D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__GPIO_3_8	IOMUX_PAD(0x56C, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__WEIM_D8	IOMUX_PAD(0x56C, 0x1D0, 2, 0x80c, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__ELCDIF_D24	IOMUX_PAD(0x56C, 0x1D0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D9__EPDC_D9	IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__GPIO_3_9	IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__WEIM_D9	IOMUX_PAD(0x570, 0x1D4, 2, 0x810, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__ELCDIF_D25	IOMUX_PAD(0x570, 0x1D4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D10__EPDC_D10	IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__GPIO_3_10	IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__WEIM_D10	IOMUX_PAD(0x574, 0x1D8, 2, 0x814, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__ELCDIF_D26	IOMUX_PAD(0x574, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D11__EPDC_D11	IOMUX_PAD(0x578, 0x1DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__GPIO_3_11	IOMUX_PAD(0x578, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__WEIM_D11	IOMUX_PAD(0x578, 0x1DC, 2, 0x818, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__ELCDIF_D27	IOMUX_PAD(0x578, 0x1DC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D12__EPDC_D12	IOMUX_PAD(0x57C, 0x1E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__GPIO_3_12	IOMUX_PAD(0x57C, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__WEIM_D12	IOMUX_PAD(0x57C, 0x1E0, 2, 0x81c, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__ELCDIF_D28	IOMUX_PAD(0x57C, 0x1E0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D13__EPDC_D13	IOMUX_PAD(0x580, 0x1E4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__GPIO_3_13	IOMUX_PAD(0x580, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__WEIM_D13	IOMUX_PAD(0x580, 0x1E4, 2, 0x820, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__ELCDIF_D29	IOMUX_PAD(0x580, 0x1E4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D14__EPDC_D14	IOMUX_PAD(0x584, 0x1E8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__GPIO_3_14	IOMUX_PAD(0x584, 0x1E8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__WEIM_D14	IOMUX_PAD(0x584, 0x1E8, 2, 0x824, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__ELCDIF_D30	IOMUX_PAD(0x584, 0x1E8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__AUD6_TXD	IOMUX_PAD(0x584, 0x1E8, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D15__EPDC_D15	IOMUX_PAD(0x588, 0x1EC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__GPIO_3_15	IOMUX_PAD(0x588, 0x1EC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__WEIM_D15	IOMUX_PAD(0x588, 0x1EC, 2, 0x828, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__ELCDIF_D31	IOMUX_PAD(0x588, 0x1EC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__AUD6_TXC	IOMUX_PAD(0x588, 0x1EC, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK	IOMUX_PAD(0x58C, 0x1F0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__GPIO_3_16	IOMUX_PAD(0x58C, 0x1F0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__WEIM_D16	IOMUX_PAD(0x58C, 0x1F0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__ELCDIF_D16	IOMUX_PAD(0x58C, 0x1F0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__AUD6_TXFS	IOMUX_PAD(0x58C, 0x1F0, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDSP__EPDC_GDSP	IOMUX_PAD(0x590, 0x1F4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__GPIO_3_17	IOMUX_PAD(0x590, 0x1F4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__WEIM_D17	IOMUX_PAD(0x590, 0x1F4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__ELCDIF_D17	IOMUX_PAD(0x590, 0x1F4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__AUD6_RXD	IOMUX_PAD(0x590, 0x1F4, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDOE__EPDC_GDOE	IOMUX_PAD(0x594, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__GPIO_3_18	IOMUX_PAD(0x594, 0x1F8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__WEIM_D18	IOMUX_PAD(0x594, 0x1F8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__ELCDIF_D18	IOMUX_PAD(0x594, 0x1F8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__AUD6_RXC	IOMUX_PAD(0x594, 0x1F8, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDRL__EPDC_GDRL	IOMUX_PAD(0x598, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__GPIO_3_19	IOMUX_PAD(0x598, 0x1FC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__WEIM_D19	IOMUX_PAD(0x598, 0x1FC, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__ELCDIF_D19	IOMUX_PAD(0x598, 0x1FC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__AUD6_RXFS	IOMUX_PAD(0x598, 0x1FC, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCLK__EPDC_SDCLK	IOMUX_PAD(0x59C, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__GPIO_3_20	IOMUX_PAD(0x59C, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__WEIM_D20	IOMUX_PAD(0x59C, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__ELCDIF_D20	IOMUX_PAD(0x59C, 0x200, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__AUD5_TXD	IOMUX_PAD(0x59C, 0x200, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOEZ__EPDC_SDOEZ	IOMUX_PAD(0x5A0, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__GPIO_3_21	IOMUX_PAD(0x5A0, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__WEIM_D21	IOMUX_PAD(0x5A0, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__ELCDIF_D21	IOMUX_PAD(0x5A0, 0x204, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__AUD5_TXC	IOMUX_PAD(0x5A0, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOED__EPDC_SDOED	IOMUX_PAD(0x5A4, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__GPIO_3_22	IOMUX_PAD(0x5A4, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__WEIM_D22	IOMUX_PAD(0x5A4, 0x208, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__ELCDIF_D22	IOMUX_PAD(0x5A4, 0x208, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__AUD5_TXFS	IOMUX_PAD(0x5A4, 0x208, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOE__EPDC_SDOE	IOMUX_PAD(0x5A8, 0x20C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__GPIO_3_23	IOMUX_PAD(0x5A8, 0x20C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__WEIM_D23	IOMUX_PAD(0x5A8, 0x20C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__ELCDIF_D23	IOMUX_PAD(0x5A8, 0x20C, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__AUD5_RXD	IOMUX_PAD(0x5A8, 0x20C, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDLE__EPDC_SDLE	IOMUX_PAD(0x5AC, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__GPIO_3_24	IOMUX_PAD(0x5AC, 0x210, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__WEIM_D24	IOMUX_PAD(0x5AC, 0x210, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__ELCDIF_D8	IOMUX_PAD(0x5AC, 0x210, 3, 0x71c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__AUD5_RXC	IOMUX_PAD(0x5AC, 0x210, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCLKN__EPDC_SDCLKN	IOMUX_PAD(0x5B0, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__GPIO_3_25		IOMUX_PAD(0x5B0, 0x214, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__WEIM_D25		IOMUX_PAD(0x5B0, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__ELCDIF_D9		IOMUX_PAD(0x5B0, 0x214, 3, 0x720, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__AUD5_RXFS		IOMUX_PAD(0x5B0, 0x214, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDSHR__EPDC_SDSHR	IOMUX_PAD(0x5B4, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__GPIO_3_26	IOMUX_PAD(0x5B4, 0x218, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__WEIM_D26	IOMUX_PAD(0x5B4, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__ELCDIF_D10	IOMUX_PAD(0x5B4, 0x218, 3, 0x724, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__AUD4_TXD	IOMUX_PAD(0x5B4, 0x218, 4, 0x6c8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCOM__EPDC_PWRCOM	IOMUX_PAD(0x5B8, 0x21C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__GPIO_3_27		IOMUX_PAD(0x5B8, 0x21C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__WEIM_D27		IOMUX_PAD(0x5B8, 0x21C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__ELCDIF_D11	IOMUX_PAD(0x5B8, 0x21C, 3, 0x728, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__AUD4_TXC		IOMUX_PAD(0x5B8, 0x21C, 4, 0x6d4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRSTAT__EPDC_PWRSTAT	IOMUX_PAD(0x5BC, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__GPIO_3_28	IOMUX_PAD(0x5BC, 0x220, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__WEIM_D28		IOMUX_PAD(0x5BC, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_D12	IOMUX_PAD(0x5BC, 0x220, 3, 0x72c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__AUD4_TXFS	IOMUX_PAD(0x5BC, 0x220, 4, 0x6d8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL0__EPDC_PWRCTRL0	IOMUX_PAD(0x5C0, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__GPIO_3_29	IOMUX_PAD(0x5C0, 0x224, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__WEIM_D29	IOMUX_PAD(0x5C0, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_D13	IOMUX_PAD(0x5C0, 0x224, 3, 0x730, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__AUD4_RXD	IOMUX_PAD(0x5C0, 0x224, 4, 0x6c4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL1__EPDC_PWRCTRL1	IOMUX_PAD(0x5C4, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__GPIO_3_30	IOMUX_PAD(0x5C4, 0x228, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__WEIM_D30	IOMUX_PAD(0x5C4, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_D14	IOMUX_PAD(0x5C4, 0x228, 3, 0x734, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__AUD4_RXC	IOMUX_PAD(0x5C4, 0x228, 4, 0x6cc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL2__EPDC_PWRCTRL2	IOMUX_PAD(0x5C8, 0x22C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__GPIO_3_31	IOMUX_PAD(0x5C8, 0x22C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__WEIM_D31	IOMUX_PAD(0x5C8, 0x22C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_D15	IOMUX_PAD(0x5C8, 0x22C, 3, 0x738, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__AUD4_RXFS	IOMUX_PAD(0x5C8, 0x22C, 4, 0x6d0, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT0	IOMUX_PAD(0x5C8, 0x22C, 6, 0x7b8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL3__PWRCTRL3	IOMUX_PAD(0x5CC, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__GPIO_4_20	IOMUX_PAD(0x5CC, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__WEIM_EB2	IOMUX_PAD(0x5CC, 0x230, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT1	IOMUX_PAD(0x5CC, 0x230, 6, 0x7bc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_VCOM0__EPDC_VCOM0	IOMUX_PAD(0x5D0, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM0__GPIO_4_21	IOMUX_PAD(0x5D0, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM0__WEIM_EB3	IOMUX_PAD(0x5D0, 0x234, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_VCOM1__EPDC_VCOM1	IOMUX_PAD(0x5D4, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM1__GPIO_4_22	IOMUX_PAD(0x5D4, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM1__WEIM_CS3	IOMUX_PAD(0x5D4, 0x238, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_BDR0__EPDC_BDR0	IOMUX_PAD(0x5D8, 0x23C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR0__GPIO_4_23	IOMUX_PAD(0x5D8, 0x23C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR0__ELCDIF_D7	IOMUX_PAD(0x5D8, 0x23C, 3, 0x718, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_BDR1__EPDC_BDR1	IOMUX_PAD(0x5DC, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR1__GPIO_4_24	IOMUX_PAD(0x5DC, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR1__ELCDIF_D6	IOMUX_PAD(0x5DC, 0x240, 3, 0x714, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE0__EPDC_SDCE0	IOMUX_PAD(0x5E0, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE0__GPIO_4_25	IOMUX_PAD(0x5E0, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE0__ELCDIF_D5	IOMUX_PAD(0x5E0, 0x244, 3, 0x710, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE1__EPDC_SDCE1	IOMUX_PAD(0x5E4, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE1__GPIO_4_26	IOMUX_PAD(0x5E4, 0x248, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE1__ELCDIF_D4	IOMUX_PAD(0x5E4, 0x248, 2, 0x70c, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE2__EPDC_SDCE2		IOMUX_PAD(0x5E8, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE2__GPIO_4_27		IOMUX_PAD(0x5E8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT3	IOMUX_PAD(0x5E8, 0x24C, 3, 0x708, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE3__EPDC_SDCE3	IOMUX_PAD(0x5EC, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE3__GPIO_4_28	IOMUX_PAD(0x5EC, 0x250, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE3__ELCDIF_D2	IOMUX_PAD(0x5EC, 0x250, 3, 0x704, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE4__EPDC_SDCE4	IOMUX_PAD(0x5F0, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE4__GPIO_4_29	IOMUX_PAD(0x5F0, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE4__ELCDIF_D1	IOMUX_PAD(0x5F0, 0x254, 3, 0x700, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE5__EPDC_SDCE5	IOMUX_PAD(0x5F4, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE5__GPIO_4_30	IOMUX_PAD(0x5F4, 0x258, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE5__ELCDIF_D0	IOMUX_PAD(0x5F4, 0x258, 3, 0x6fc, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA0__WEIM_A0	IOMUX_PAD(0x5F8, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA0__GPIO_1_0	IOMUX_PAD(0x5F8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA0__KEY_COL4	IOMUX_PAD(0x5f8, 0x25C, 3, 0x790, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA1__WEIM_A1	IOMUX_PAD(0x5FC, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA1__GPIO_1_1	IOMUX_PAD(0x5FC, 0x260, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA1__KEY_ROW4	IOMUX_PAD(0x5fc, 0x260, 3, 0x7a0, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA2__WEIM_A2	IOMUX_PAD(0x600, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA2__GPIO_1_2	IOMUX_PAD(0x600, 0x264, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA2__KEY_COL5	IOMUX_PAD(0x600, 0x264, 3, 0x794, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA3__WEIM_A3	IOMUX_PAD(0x604, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA3__GPIO_1_3	IOMUX_PAD(0x604, 0x268, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA3__KEY_ROW5	IOMUX_PAD(0x604, 0x268, 3, 0x7a4, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA4__WEIM_A4	IOMUX_PAD(0x608, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA4__GPIO_1_4	IOMUX_PAD(0x608, 0x26C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA4__KEY_COL6	IOMUX_PAD(0x608, 0x26C, 3, 0x798, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA5__WEIM_A5	IOMUX_PAD(0x60C, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA5__GPIO_1_5	IOMUX_PAD(0x60C, 0x270, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA5__KEY_ROW6	IOMUX_PAD(0x60C, 0x270, 3, 0x7a8, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA6__WEIM_A6	IOMUX_PAD(0x610, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA6__GPIO_1_6	IOMUX_PAD(0x610, 0x274, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA6__KEY_COL7	IOMUX_PAD(0x610, 0x274, 3, 0x79c, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA7__WEIM_A7	IOMUX_PAD(0x614, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA7__GPIO_1_7	IOMUX_PAD(0x614, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA7__KEY_ROW7	IOMUX_PAD(0x614, 0x278, 3, 0x7ac, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA8__WEIM_A8	IOMUX_PAD(0x618, 0x27C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA8__GPIO_1_8	IOMUX_PAD(0x618, 0x27C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA8__NANDF_CLE	IOMUX_PAD(0x618, 0x27C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA9__WEIM_A9	IOMUX_PAD(0x61C, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA9__GPIO_1_9	IOMUX_PAD(0x61C, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA9__NANDF_ALE	IOMUX_PAD(0x61C, 0x280, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA10__WEIM_A10	IOMUX_PAD(0x620, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA10__GPIO_1_10	IOMUX_PAD(0x620, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA10__NANDF_CE0	IOMUX_PAD(0x620, 0x284, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA11__WEIM_A11	IOMUX_PAD(0x624, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA11__GPIO_1_11	IOMUX_PAD(0x624, 0x288, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA11__NANDF_CE1	IOMUX_PAD(0x624, 0x288, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA12__WEIM_A12	IOMUX_PAD(0x628, 0x28C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA12__GPIO_1_12	IOMUX_PAD(0x628, 0x28C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA12__NANDF_CE2	IOMUX_PAD(0x628, 0x28C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EIM_DA12__EPDC_SDCE6	IOMUX_PAD(0x628, 0x28C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA13__WEIM_A13	IOMUX_PAD(0x62C, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA13__GPIO_1_13	IOMUX_PAD(0x62C, 0x290, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA13__NANDF_CE3	IOMUX_PAD(0x62C, 0x290, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PIN_EIM_DA13__EPDC_SDCE7	IOMUX_PAD(0x62C, 0x290, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA14__WEIM_A14	IOMUX_PAD(0x630, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA14__GPIO_1_14	IOMUX_PAD(0x630, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA14__NANDF_READY	IOMUX_PAD(0x630, 0x294, 2, 0x7B4, 2, PAD_CTL_PKE | \
-							PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_EIM_DA14__EPDC_SDCE8	IOMUX_PAD(0x630, 0x294, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA15__WEIM_A15	IOMUX_PAD(0x634, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA15__GPIO_1_15	IOMUX_PAD(0x634, 0x298, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA15__NANDF_DQS	IOMUX_PAD(0x634, 0x298, 2, 0x7B0, 2, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EIM_DA15__EPDC_SDCE9	IOMUX_PAD(0x634, 0x298, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS2__WEIM_CS2	IOMUX_PAD(0x638, 0x29C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS2__GPIO_1_16	IOMUX_PAD(0x638, 0x29C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS2__WEIM_A27	IOMUX_PAD(0x638, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS1__WEIM_CS1	IOMUX_PAD(0x63C, 0x2A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS1__GPIO_1_17	IOMUX_PAD(0x63C, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS0__WEIM_CS0	IOMUX_PAD(0x640, 0x2A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS0__GPIO_1_18	IOMUX_PAD(0x640, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_EB0__WEIM_EB0	IOMUX_PAD(0x644, 0x2A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_EB0__GPIO_1_19	IOMUX_PAD(0x644, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_EB1__WEIM_EB1	IOMUX_PAD(0x648, 0x2AC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_EB1__GPIO_1_20	IOMUX_PAD(0x648, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_WAIT__WEIM_WAIT	IOMUX_PAD(0x64C, 0x2B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_WAIT__GPIO_1_21	IOMUX_PAD(0x64C, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_BCLK__WEIM_BCLK	IOMUX_PAD(0x650, 0x2B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_BCLK__GPIO_1_22	IOMUX_PAD(0x650, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_RDY__WEIM_RDY	IOMUX_PAD(0x654, 0x2B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_RDY__GPIO_1_23	IOMUX_PAD(0x654, 0x2B8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_OE__WEIM_OE	IOMUX_PAD(0x658, 0x2BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_OE__GPIO_1_24	IOMUX_PAD(0x658, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_RW__WEIM_RW	IOMUX_PAD(0x65C, 0x2C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_RW__GPIO_1_25	IOMUX_PAD(0x65C, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_LBA__WEIM_LBA	IOMUX_PAD(0x660, 0x2C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_LBA__GPIO_1_26	IOMUX_PAD(0x660, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CRE__WEIM_CRE	IOMUX_PAD(0x664, 0x2C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CRE__GPIO_1_27	IOMUX_PAD(0x664, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX50_H__ */
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
deleted file mode 100644
index 2fdc9bf..0000000
--- a/arch/arm/mach-imx/lluart.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-
-#define IMX6Q_UART1_BASE_ADDR	0x02020000
-#define IMX6Q_UART2_BASE_ADDR	0x021e8000
-#define IMX6Q_UART3_BASE_ADDR	0x021ec000
-#define IMX6Q_UART4_BASE_ADDR	0x021f0000
-#define IMX6Q_UART5_BASE_ADDR	0x021f4000
-
-/*
- * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
- * of IMX6Q_UART##n##_BASE_ADDR.
- */
-#define IMX6Q_UART_BASE_ADDR(n)	IMX6Q_UART##n##_BASE_ADDR
-#define IMX6Q_UART_BASE(n)	IMX6Q_UART_BASE_ADDR(n)
-#define IMX6Q_DEBUG_UART_BASE	IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
-
-static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART
-	.virtual	= IMX_IO_P2V(IMX6Q_DEBUG_UART_BASE),
-	.pfn		= __phys_to_pfn(IMX6Q_DEBUG_UART_BASE),
-	.length		= 0x4000,
-	.type		= MT_DEVICE,
-#endif
-};
-
-void __init imx_lluart_map_io(void)
-{
-	if (imx_lluart_desc.virtual)
-		iotable_init(&imx_lluart_desc, 1);
-}
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 5c9bd2c..067580b 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -137,17 +137,13 @@
 	mx1_clocks_init(32768);
 }
 
-static struct sys_timer apf9328_timer = {
-	.init	= apf9328_timer_init,
-};
-
 MACHINE_START(APF9328, "Armadeus APF9328")
 	/* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
 	.map_io       = mx1_map_io,
 	.init_early   = imx1_init_early,
 	.init_irq     = mx1_init_irq,
 	.handle_irq   = imx1_handle_irq,
-	.timer        = &apf9328_timer,
+	.init_time	= apf9328_timer_init,
 	.init_machine = apf9328_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 59bd6b0..368a6e3 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -557,10 +557,6 @@
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer armadillo5x0_timer = {
-	.init	= armadillo5x0_timer_init,
-};
-
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
 	.atag_offset = 0x100,
@@ -568,7 +564,7 @@
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.handle_irq = imx31_handle_irq,
-	.timer = &armadillo5x0_timer,
+	.init_time	= armadillo5x0_timer_init,
 	.init_machine = armadillo5x0_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 3a39d5a..2d00476 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -53,16 +53,12 @@
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer bug_timer = {
-	.init = bug_timer_init,
-};
-
 MACHINE_START(BUG, "BugLabs BUGBase")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.handle_irq = imx31_handle_irq,
-	.timer = &bug_timer,
+	.init_time	= bug_timer_init,
 	.init_machine = bug_board_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 12a3706..1465593 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -309,17 +309,13 @@
 	mx27_clocks_init(26000000);
 }
 
-static struct sys_timer eukrea_cpuimx27_timer = {
-	.init = eukrea_cpuimx27_timer_init,
-};
-
 MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
 	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
 	.handle_irq = imx27_handle_irq,
-	.timer = &eukrea_cpuimx27_timer,
+	.init_time	= eukrea_cpuimx27_timer_init,
 	.init_machine = eukrea_cpuimx27_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 5a31bf8..771362d 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -193,10 +193,6 @@
 	mx35_clocks_init();
 }
 
-static struct sys_timer eukrea_cpuimx35_timer = {
-	.init	= eukrea_cpuimx35_timer_init,
-};
-
 MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
 	/* Maintainer: Eukrea Electromatique */
 	.atag_offset = 0x100,
@@ -204,7 +200,7 @@
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
 	.handle_irq = imx35_handle_irq,
-	.timer = &eukrea_cpuimx35_timer,
+	.init_time	= eukrea_cpuimx35_timer_init,
 	.init_machine = eukrea_cpuimx35_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index b727de0..9b73932 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -355,10 +355,6 @@
 	mx51_clocks_init(32768, 24000000, 22579200, 0);
 }
 
-static struct sys_timer mxc_timer = {
-	.init	= eukrea_cpuimx51sd_timer_init,
-};
-
 MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	/* Maintainer: Eric Bénard <eric@eukrea.com> */
 	.atag_offset = 0x100,
@@ -366,7 +362,7 @@
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
 	.handle_irq = imx51_handle_irq,
-	.timer = &mxc_timer,
+	.init_time	= eukrea_cpuimx51sd_timer_init,
 	.init_machine = eukrea_cpuimx51sd_init,
 	.init_late	= imx51_init_late,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 75027a5..4bf4544 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -159,10 +159,6 @@
 	mx25_clocks_init();
 }
 
-static struct sys_timer eukrea_cpuimx25_timer = {
-	.init   = eukrea_cpuimx25_timer_init,
-};
-
 MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
 	/* Maintainer: Eukrea Electromatique */
 	.atag_offset = 0x100,
@@ -170,7 +166,7 @@
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
 	.handle_irq = imx25_handle_irq,
-	.timer = &eukrea_cpuimx25_timer,
+	.init_time = eukrea_cpuimx25_timer_init,
 	.init_machine = eukrea_cpuimx25_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 318bd8d..29ac8ee6 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -598,10 +598,6 @@
 	mx27_clocks_init((unsigned long)25000000);
 }
 
-static struct sys_timer visstrim_m10_timer = {
-	.init	= visstrim_m10_timer_init,
-};
-
 MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
 	.atag_offset = 0x100,
 	.reserve = visstrim_reserve,
@@ -609,7 +605,7 @@
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
 	.handle_irq = imx27_handle_irq,
-	.timer = &visstrim_m10_timer,
+	.init_time	= visstrim_m10_timer_init,
 	.init_machine = visstrim_m10_board_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 53a8601..1a851ae 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -65,10 +65,6 @@
 	mx27_clocks_init(25000000);
 }
 
-static struct sys_timer mx27ipcam_timer = {
-	.init	= mx27ipcam_timer_init,
-};
-
 MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
 	/* maintainer: Freescale Semiconductor, Inc. */
 	.atag_offset = 0x100,
@@ -76,7 +72,7 @@
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
 	.handle_irq = imx27_handle_irq,
-	.timer = &mx27ipcam_timer,
+	.init_time	= mx27ipcam_timer_init,
 	.init_machine = mx27ipcam_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index fc8dce9..3da2e3e 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -72,17 +72,13 @@
 	mx27_clocks_init(26000000);
 }
 
-static struct sys_timer mx27lite_timer = {
-	.init	= mx27lite_timer_init,
-};
-
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
 	.handle_irq = imx27_handle_irq,
-	.timer = &mx27lite_timer,
+	.init_time	= mx27lite_timer_init,
 	.init_machine = mx27lite_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 860284d..f579c61 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -44,26 +44,22 @@
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static void __init imx53_timer_init(void)
-{
-	mx53_clocks_init_dt();
-}
-
-static struct sys_timer imx53_timer = {
-	.init = imx53_timer_init,
-};
-
 static const char *imx53_dt_board_compat[] __initdata = {
 	"fsl,imx53",
 	NULL
 };
 
+static void __init imx53_timer_init(void)
+{
+	mx53_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.map_io		= mx53_map_io,
 	.init_early	= imx53_init_early,
 	.init_irq	= mx53_init_irq,
 	.handle_irq	= imx53_handle_irq,
-	.timer		= &imx53_timer,
+	.init_time	= imx53_timer_init,
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 4eb1b3a..5a18e7e 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -29,8 +30,8 @@
 #include <asm/cpuidle.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
@@ -216,22 +217,16 @@
 
 static void __init imx6q_map_io(void)
 {
-	imx_lluart_map_io();
+	debug_ll_io_init();
 	imx_scu_map_io();
-	imx6q_clock_map_io();
 }
 
-static const struct of_device_id imx6q_irq_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{ /* sentinel */ }
-};
-
 static void __init imx6q_init_irq(void)
 {
 	l2x0_of_init(0, ~0UL);
 	imx_src_init();
 	imx_gpc_init();
-	of_irq_init(imx6q_irq_match);
+	irqchip_init();
 }
 
 static void __init imx6q_timer_init(void)
@@ -241,10 +236,6 @@
 	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 
-static struct sys_timer imx6q_timer = {
-	.init = imx6q_timer_init,
-};
-
 static const char *imx6q_dt_compat[] __initdata = {
 	"fsl,imx6q",
 	NULL,
@@ -254,8 +245,7 @@
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,
-	.handle_irq	= imx6q_handle_irq,
-	.timer		= &imx6q_timer,
+	.init_time	= imx6q_timer_init,
 	.init_machine	= imx6q_init_machine,
 	.init_late      = imx6q_init_late,
 	.dt_compat	= imx6q_dt_compat,
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 2e536ea5..c7bc41d 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -284,17 +284,13 @@
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer kzm_timer = {
-	.init = kzm_timer_init,
-};
-
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
 	.atag_offset = 0x100,
 	.map_io = kzm_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.handle_irq = imx31_handle_irq,
-	.timer = &kzm_timer,
+	.init_time	= kzm_timer_init,
 	.init_machine = kzm_board_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 06b4837..9f883e4 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -132,10 +132,6 @@
 	mx1_clocks_init(32000);
 }
 
-static struct sys_timer mx1ads_timer = {
-	.init	= mx1ads_timer_init,
-};
-
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
 	.atag_offset = 0x100,
@@ -143,7 +139,7 @@
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
 	.handle_irq = imx1_handle_irq,
-	.timer = &mx1ads_timer,
+	.init_time	= mx1ads_timer_init,
 	.init_machine = mx1ads_init,
 	.restart	= mxc_restart,
 MACHINE_END
@@ -154,7 +150,7 @@
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
 	.handle_irq = imx1_handle_irq,
-	.timer = &mx1ads_timer,
+	.init_time	= mx1ads_timer_init,
 	.init_machine = mx1ads_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 6adb313..a06aa4d 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -318,10 +318,6 @@
 	mx21_clocks_init(32768, 26000000);
 }
 
-static struct sys_timer mx21ads_timer = {
-	.init	= mx21ads_timer_init,
-};
-
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
 	.atag_offset = 0x100,
@@ -329,7 +325,7 @@
 	.init_early = imx21_init_early,
 	.init_irq = mx21_init_irq,
 	.handle_irq = imx21_handle_irq,
-	.timer = &mx21ads_timer,
+	.init_time	= mx21ads_timer_init,
 	.init_machine = mx21ads_board_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index b1b03aa..8bcda68 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -257,10 +257,6 @@
 	mx25_clocks_init();
 }
 
-static struct sys_timer mx25pdk_timer = {
-	.init   = mx25pdk_timer_init,
-};
-
 MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.atag_offset = 0x100,
@@ -268,7 +264,7 @@
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
 	.handle_irq = imx25_handle_irq,
-	.timer = &mx25pdk_timer,
+	.init_time	= mx25pdk_timer_init,
 	.init_machine = mx25pdk_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index d0e547f..25b3e4c 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -538,10 +538,6 @@
 	mx27_clocks_init(26000000);
 }
 
-static struct sys_timer mx27pdk_timer = {
-	.init	= mx27pdk_timer_init,
-};
-
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	/* maintainer: Freescale Semiconductor, Inc. */
 	.atag_offset = 0x100,
@@ -549,7 +545,7 @@
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
 	.handle_irq = imx27_handle_irq,
-	.timer = &mx27pdk_timer,
+	.init_time	= mx27pdk_timer_init,
 	.init_machine = mx27pdk_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 3d036f5..9821b824 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -323,10 +323,6 @@
 	mx27_clocks_init(fref);
 }
 
-static struct sys_timer mx27ads_timer = {
-	.init	= mx27ads_timer_init,
-};
-
 static struct map_desc mx27ads_io_desc[] __initdata = {
 	{
 		.virtual = PBC_BASE_ADDRESS,
@@ -349,7 +345,7 @@
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
 	.handle_irq = imx27_handle_irq,
-	.timer = &mx27ads_timer,
+	.init_time	= mx27ads_timer_init,
 	.init_machine = mx27ads_board_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index bc301be..1ed9161 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -762,10 +762,6 @@
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31_3ds_timer = {
-	.init	= mx31_3ds_timer_init,
-};
-
 static void __init mx31_3ds_reserve(void)
 {
 	/* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
@@ -780,7 +776,7 @@
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.handle_irq = imx31_handle_irq,
-	.timer = &mx31_3ds_timer,
+	.init_time	= mx31_3ds_timer_init,
 	.init_machine = mx31_3ds_init,
 	.reserve = mx31_3ds_reserve,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 8b56f88..daf8889 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -576,10 +576,6 @@
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31ads_timer = {
-	.init	= mx31ads_timer_init,
-};
-
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.atag_offset = 0x100,
@@ -587,7 +583,7 @@
 	.init_early = imx31_init_early,
 	.init_irq = mx31ads_init_irq,
 	.handle_irq = imx31_handle_irq,
-	.timer = &mx31ads_timer,
+	.init_time	= mx31ads_timer_init,
 	.init_machine = mx31ads_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 08b9965..832b1e2 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -303,17 +303,13 @@
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31lilly_timer = {
-	.init	= mx31lilly_timer_init,
-};
-
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.atag_offset = 0x100,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.handle_irq = imx31_handle_irq,
-	.timer = &mx31lilly_timer,
+	.init_time	= mx31lilly_timer_init,
 	.init_machine = mx31lilly_board_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index bdcd92e..bea0729 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -285,10 +285,6 @@
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31lite_timer = {
-	.init	= mx31lite_timer_init,
-};
-
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.atag_offset = 0x100,
@@ -296,7 +292,7 @@
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.handle_irq = imx31_handle_irq,
-	.timer = &mx31lite_timer,
+	.init_time	= mx31lite_timer_init,
 	.init_machine = mx31lite_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 2517cfa..dae4cd7 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -596,10 +596,6 @@
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31moboard_timer = {
-	.init	= mx31moboard_timer_init,
-};
-
 static void __init mx31moboard_reserve(void)
 {
 	/* reserve 4 MiB for mx3-camera */
@@ -615,7 +611,7 @@
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.handle_irq = imx31_handle_irq,
-	.timer = &mx31moboard_timer,
+	.init_time	= mx31moboard_timer_init,
 	.init_machine = mx31moboard_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 5277da4..a42f4f0 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -602,10 +602,6 @@
 	mx35_clocks_init();
 }
 
-static struct sys_timer mx35pdk_timer = {
-	.init	= mx35pdk_timer_init,
-};
-
 static void __init mx35_3ds_reserve(void)
 {
 	/* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
@@ -620,7 +616,7 @@
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
 	.handle_irq = imx35_handle_irq,
-	.timer = &mx35pdk_timer,
+	.init_time	= mx35pdk_timer_init,
 	.init_machine = mx35_3ds_init,
 	.reserve = mx35_3ds_reserve,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c
deleted file mode 100644
index 0c1f88a..0000000
--- a/arch/arm/mach-imx/mach-mx50_rdp.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx50.h"
-#include "hardware.h"
-#include "iomux-mx50.h"
-
-#define FEC_EN		IMX_GPIO_NR(6, 23)
-#define FEC_RESET_B	IMX_GPIO_NR(4, 12)
-
-static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
-	/* SD1 */
-	MX50_PAD_ECSPI2_SS0__GPIO_4_19,
-	MX50_PAD_EIM_CRE__GPIO_1_27,
-	MX50_PAD_SD1_CMD__SD1_CMD,
-
-	MX50_PAD_SD1_CLK__SD1_CLK,
-	MX50_PAD_SD1_D0__SD1_D0,
-	MX50_PAD_SD1_D1__SD1_D1,
-	MX50_PAD_SD1_D2__SD1_D2,
-	MX50_PAD_SD1_D3__SD1_D3,
-
-	/* SD2 */
-	MX50_PAD_SD2_CD__GPIO_5_17,
-	MX50_PAD_SD2_WP__GPIO_5_16,
-	MX50_PAD_SD2_CMD__SD2_CMD,
-	MX50_PAD_SD2_CLK__SD2_CLK,
-	MX50_PAD_SD2_D0__SD2_D0,
-	MX50_PAD_SD2_D1__SD2_D1,
-	MX50_PAD_SD2_D2__SD2_D2,
-	MX50_PAD_SD2_D3__SD2_D3,
-	MX50_PAD_SD2_D4__SD2_D4,
-	MX50_PAD_SD2_D5__SD2_D5,
-	MX50_PAD_SD2_D6__SD2_D6,
-	MX50_PAD_SD2_D7__SD2_D7,
-
-	/* SD3 */
-	MX50_PAD_SD3_CMD__SD3_CMD,
-	MX50_PAD_SD3_CLK__SD3_CLK,
-	MX50_PAD_SD3_D0__SD3_D0,
-	MX50_PAD_SD3_D1__SD3_D1,
-	MX50_PAD_SD3_D2__SD3_D2,
-	MX50_PAD_SD3_D3__SD3_D3,
-	MX50_PAD_SD3_D4__SD3_D4,
-	MX50_PAD_SD3_D5__SD3_D5,
-	MX50_PAD_SD3_D6__SD3_D6,
-	MX50_PAD_SD3_D7__SD3_D7,
-
-	/* PWR_INT */
-	MX50_PAD_ECSPI2_MISO__GPIO_4_18,
-
-	/* UART pad setting */
-	MX50_PAD_UART1_TXD__UART1_TXD,
-	MX50_PAD_UART1_RXD__UART1_RXD,
-	MX50_PAD_UART1_RTS__UART1_RTS,
-	MX50_PAD_UART2_TXD__UART2_TXD,
-	MX50_PAD_UART2_RXD__UART2_RXD,
-	MX50_PAD_UART2_CTS__UART2_CTS,
-	MX50_PAD_UART2_RTS__UART2_RTS,
-
-	MX50_PAD_I2C1_SCL__I2C1_SCL,
-	MX50_PAD_I2C1_SDA__I2C1_SDA,
-	MX50_PAD_I2C2_SCL__I2C2_SCL,
-	MX50_PAD_I2C2_SDA__I2C2_SDA,
-
-	MX50_PAD_EPITO__USBH1_PWR,
-	/* Need to comment below line if
-	 * one needs to debug owire.
-	 */
-	MX50_PAD_OWIRE__USBH1_OC,
-	/* using gpio to control otg pwr */
-	MX50_PAD_PWM2__GPIO_6_25,
-	MX50_PAD_I2C3_SCL__USBOTG_OC,
-
-	MX50_PAD_SSI_RXC__FEC_MDIO,
-	MX50_PAD_SSI_RXFS__FEC_MDC,
-	MX50_PAD_DISP_D0__FEC_TXCLK,
-	MX50_PAD_DISP_D1__FEC_RX_ER,
-	MX50_PAD_DISP_D2__FEC_RX_DV,
-	MX50_PAD_DISP_D3__FEC_RXD1,
-	MX50_PAD_DISP_D4__FEC_RXD0,
-	MX50_PAD_DISP_D5__FEC_TX_EN,
-	MX50_PAD_DISP_D6__FEC_TXD1,
-	MX50_PAD_DISP_D7__FEC_TXD0,
-	MX50_PAD_I2C3_SDA__GPIO_6_23,
-	MX50_PAD_ECSPI1_SCLK__GPIO_4_12,
-
-	MX50_PAD_CSPI_SS0__CSPI_SS0,
-	MX50_PAD_ECSPI1_MOSI__CSPI_SS1,
-	MX50_PAD_CSPI_MOSI__CSPI_MOSI,
-	MX50_PAD_CSPI_MISO__CSPI_MISO,
-
-	/* SGTL500_OSC_EN */
-	MX50_PAD_UART1_CTS__GPIO_6_8,
-
-	/* SGTL_AMP_SHDN */
-	MX50_PAD_UART3_RXD__GPIO_6_15,
-
-	/* Keypad */
-	MX50_PAD_KEY_COL0__KEY_COL0,
-	MX50_PAD_KEY_ROW0__KEY_ROW0,
-	MX50_PAD_KEY_COL1__KEY_COL1,
-	MX50_PAD_KEY_ROW1__KEY_ROW1,
-	MX50_PAD_KEY_COL2__KEY_COL2,
-	MX50_PAD_KEY_ROW2__KEY_ROW2,
-	MX50_PAD_KEY_COL3__KEY_COL3,
-	MX50_PAD_KEY_ROW3__KEY_ROW3,
-	MX50_PAD_EIM_DA0__KEY_COL4,
-	MX50_PAD_EIM_DA1__KEY_ROW4,
-	MX50_PAD_EIM_DA2__KEY_COL5,
-	MX50_PAD_EIM_DA3__KEY_ROW5,
-	MX50_PAD_EIM_DA4__KEY_COL6,
-	MX50_PAD_EIM_DA5__KEY_ROW6,
-	MX50_PAD_EIM_DA6__KEY_COL7,
-	MX50_PAD_EIM_DA7__KEY_ROW7,
-	/*EIM pads */
-	MX50_PAD_EIM_DA8__GPIO_1_8,
-	MX50_PAD_EIM_DA9__GPIO_1_9,
-	MX50_PAD_EIM_DA10__GPIO_1_10,
-	MX50_PAD_EIM_DA11__GPIO_1_11,
-	MX50_PAD_EIM_DA12__GPIO_1_12,
-	MX50_PAD_EIM_DA13__GPIO_1_13,
-	MX50_PAD_EIM_DA14__GPIO_1_14,
-	MX50_PAD_EIM_DA15__GPIO_1_15,
-	MX50_PAD_EIM_CS2__GPIO_1_16,
-	MX50_PAD_EIM_CS1__GPIO_1_17,
-	MX50_PAD_EIM_CS0__GPIO_1_18,
-	MX50_PAD_EIM_EB0__GPIO_1_19,
-	MX50_PAD_EIM_EB1__GPIO_1_20,
-	MX50_PAD_EIM_WAIT__GPIO_1_21,
-	MX50_PAD_EIM_BCLK__GPIO_1_22,
-	MX50_PAD_EIM_RDY__GPIO_1_23,
-	MX50_PAD_EIM_OE__GPIO_1_24,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct fec_platform_data fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static inline void mx50_rdp_fec_reset(void)
-{
-	gpio_request(FEC_EN, "fec-en");
-	gpio_direction_output(FEC_EN, 0);
-	gpio_request(FEC_RESET_B, "fec-reset_b");
-	gpio_direction_output(FEC_RESET_B, 0);
-	msleep(1);
-	gpio_set_value(FEC_RESET_B, 1);
-}
-
-static const struct imxi2c_platform_data i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx50_rdp_board_init(void)
-{
-	imx50_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
-					ARRAY_SIZE(mx50_rdp_pads));
-
-	imx50_add_imx_uart(0, &uart_pdata);
-	imx50_add_imx_uart(1, &uart_pdata);
-	mx50_rdp_fec_reset();
-	imx50_add_fec(&fec_data);
-	imx50_add_imx_i2c(0, &i2c_data);
-	imx50_add_imx_i2c(1, &i2c_data);
-	imx50_add_imx_i2c(2, &i2c_data);
-}
-
-static void __init mx50_rdp_timer_init(void)
-{
-	mx50_clocks_init(32768, 24000000, 22579200);
-}
-
-static struct sys_timer mx50_rdp_timer = {
-	.init	= mx50_rdp_timer_init,
-};
-
-MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
-	.map_io = mx50_map_io,
-	.init_early = imx50_init_early,
-	.init_irq = mx50_init_irq,
-	.handle_irq = imx50_handle_irq,
-	.timer = &mx50_rdp_timer,
-	.init_machine = mx50_rdp_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
deleted file mode 100644
index abc25bd..0000000
--- a/arch/arm/mach-imx/mach-mx51_3ds.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "3ds_debugboard.h"
-#include "common.h"
-#include "devices-imx51.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-#define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)
-
-static iomux_v3_cfg_t mx51_3ds_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-	MX51_PAD_EIM_D25__UART2_CTS,
-	MX51_PAD_EIM_D26__UART2_RTS,
-
-	/* UART3 */
-	MX51_PAD_UART3_RXD__UART3_RXD,
-	MX51_PAD_UART3_TXD__UART3_TXD,
-	MX51_PAD_EIM_D24__UART3_CTS,
-	MX51_PAD_EIM_D27__UART3_RTS,
-
-	/* CPLD PARENT IRQ PIN */
-	MX51_PAD_GPIO1_6__GPIO1_6,
-
-	/* KPP */
-	MX51_PAD_KEY_ROW0__KEY_ROW0,
-	MX51_PAD_KEY_ROW1__KEY_ROW1,
-	MX51_PAD_KEY_ROW2__KEY_ROW2,
-	MX51_PAD_KEY_ROW3__KEY_ROW3,
-	MX51_PAD_KEY_COL0__KEY_COL0,
-	MX51_PAD_KEY_COL1__KEY_COL1,
-	MX51_PAD_KEY_COL2__KEY_COL2,
-	MX51_PAD_KEY_COL3__KEY_COL3,
-	MX51_PAD_KEY_COL4__KEY_COL4,
-	MX51_PAD_KEY_COL5__KEY_COL5,
-
-	/* eCSPI2 */
-	MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
-	MX51_PAD_NANDF_RB3__ECSPI2_MISO,
-	MX51_PAD_NANDF_D15__ECSPI2_MOSI,
-	MX51_PAD_NANDF_D12__GPIO3_28,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mx51_3ds_board_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(0, 1, KEY_2),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_F1),
-	KEY(0, 4, KEY_UP),
-	KEY(0, 5, KEY_F2),
-
-	KEY(1, 0, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(1, 2, KEY_6),
-	KEY(1, 3, KEY_LEFT),
-	KEY(1, 4, KEY_SELECT),
-	KEY(1, 5, KEY_RIGHT),
-
-	KEY(2, 0, KEY_7),
-	KEY(2, 1, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(2, 3, KEY_F3),
-	KEY(2, 4, KEY_DOWN),
-	KEY(2, 5, KEY_F4),
-
-	KEY(3, 0, KEY_0),
-	KEY(3, 1, KEY_OK),
-	KEY(3, 2, KEY_ESC),
-	KEY(3, 3, KEY_ENTER),
-	KEY(3, 4, KEY_MENU),
-	KEY(3, 5, KEY_BACK)
-};
-
-static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
-	.keymap		= mx51_3ds_board_keymap,
-	.keymap_size	= ARRAY_SIZE(mx51_3ds_board_keymap),
-};
-
-static int mx51_3ds_spi2_cs[] = {
-	MXC_SPI_CS(0),
-	MX51_3DS_ECSPI2_CS,
-};
-
-static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
-	.chipselect	= mx51_3ds_spi2_cs,
-	.num_chipselect	= ARRAY_SIZE(mx51_3ds_spi2_cs),
-};
-
-static struct spi_board_info mx51_3ds_spi_nor_device[] = {
-	{
-	 .modalias = "m25p80",
-	 .max_speed_hz = 25000000,	/* max spi clock (SCK) speed in HZ */
-	 .bus_num = 1,
-	 .chip_select = 1,
-	 .mode = SPI_MODE_0,
-	 .platform_data = NULL,},
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_3ds_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
-					ARRAY_SIZE(mx51_3ds_pads));
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, &uart_pdata);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
-	spi_register_board_info(mx51_3ds_spi_nor_device,
-				ARRAY_SIZE(mx51_3ds_spi_nor_device));
-
-	if (mxc_expio_init(MX51_CS5_BASE_ADDR, IMX_GPIO_NR(1, 6)))
-		printk(KERN_WARNING "Init of the debugboard failed, all "
-				    "devices on the board are unusable.\n");
-
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-	imx51_add_imx_keypad(&mx51_3ds_map_data);
-	imx51_add_imx2_wdt(0);
-}
-
-static void __init mx51_3ds_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx51_3ds_timer = {
-	.init = mx51_3ds_timer_init,
-};
-
-MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_3ds_timer,
-	.init_machine = mx51_3ds_init,
-	.init_late	= imx51_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index d9a84ca..6c4d7fe 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -418,10 +418,6 @@
 	mx51_clocks_init(32768, 24000000, 22579200, 0);
 }
 
-static struct sys_timer mx51_babbage_timer = {
-	.init = mx51_babbage_timer_init,
-};
-
 MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
 	.atag_offset = 0x100,
@@ -429,7 +425,7 @@
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
 	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_babbage_timer,
+	.init_time	= mx51_babbage_timer_init,
 	.init_machine = mx51_babbage_init,
 	.init_late	= imx51_init_late,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index f4a8c7e..a27faab 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -261,10 +261,6 @@
 	mx27_clocks_init(26000000);
 }
 
-static struct sys_timer mxt_td60_timer = {
-	.init	= mxt_td60_timer_init,
-};
-
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
 	.atag_offset = 0x100,
@@ -272,7 +268,7 @@
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
 	.handle_irq = imx27_handle_irq,
-	.timer = &mxt_td60_timer,
+	.init_time	= mxt_td60_timer_init,
 	.init_machine = mxt_td60_board_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index eee369f..b8b15bb 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -416,10 +416,6 @@
 	mx27_clocks_init(26000000);
 }
 
-static struct sys_timer pca100_timer = {
-	.init = pca100_timer_init,
-};
-
 MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
@@ -427,6 +423,6 @@
 	.init_irq = mx27_init_irq,
 	.handle_irq = imx27_handle_irq,
 	.init_machine = pca100_init,
-	.timer = &pca100_timer,
+	.init_time	= pca100_timer_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 547fef1..bc0261e 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -685,10 +685,6 @@
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer pcm037_timer = {
-	.init	= pcm037_timer_init,
-};
-
 static void __init pcm037_reserve(void)
 {
 	/* reserve 4 MiB for mx3-camera */
@@ -709,7 +705,7 @@
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.handle_irq = imx31_handle_irq,
-	.timer = &pcm037_timer,
+	.init_time	= pcm037_timer_init,
 	.init_machine = pcm037_init,
 	.init_late = pcm037_init_late,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 4aa0d07..e805ac2 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -346,17 +346,13 @@
 	mx27_clocks_init(26000000);
 }
 
-static struct sys_timer pcm038_timer = {
-	.init = pcm038_timer_init,
-};
-
 MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
 	.handle_irq = imx27_handle_irq,
-	.timer = &pcm038_timer,
+	.init_time	= pcm038_timer_init,
 	.init_machine = pcm038_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 9244544..8ed533f 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -394,10 +394,6 @@
 	mx35_clocks_init();
 }
 
-static struct sys_timer pcm043_timer = {
-	.init	= pcm043_timer_init,
-};
-
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	/* Maintainer: Pengutronix */
 	.atag_offset = 0x100,
@@ -405,7 +401,7 @@
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
 	.handle_irq = imx35_handle_irq,
-	.timer = &pcm043_timer,
+	.init_time = pcm043_timer_init,
 	.init_machine = pcm043_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 96d9a91..22af27e 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -260,10 +260,6 @@
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer qong_timer = {
-	.init	= qong_timer_init,
-};
-
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	/* Maintainer: DENX Software Engineering GmbH */
 	.atag_offset = 0x100,
@@ -271,7 +267,7 @@
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.handle_irq = imx31_handle_irq,
-	.timer = &qong_timer,
+	.init_time	= qong_timer_init,
 	.init_machine = qong_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index fc97040..b0fa10d 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -131,10 +131,6 @@
 	mx1_clocks_init(32000);
 }
 
-static struct sys_timer scb9328_timer = {
-	.init	= scb9328_timer_init,
-};
-
 MACHINE_START(SCB9328, "Synertronixx scb9328")
 	/* Sascha Hauer */
 	.atag_offset = 100,
@@ -142,7 +138,7 @@
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
 	.handle_irq = imx1_handle_irq,
-	.timer = &scb9328_timer,
+	.init_time	= scb9328_timer_init,
 	.init_machine = scb9328_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 3aecf91..0910761e 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -305,17 +305,13 @@
 	mx35_clocks_init();
 }
 
-static struct sys_timer vpr200_timer = {
-	.init	= vpr200_timer_init,
-};
-
 MACHINE_START(VPR200, "VPR200")
 	/* Maintainer: Creative Product Design */
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
 	.handle_irq = imx35_handle_irq,
-	.timer = &vpr200_timer,
+	.init_time = vpr200_timer_init,
 	.init_machine = vpr200_board_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 79d71cf..cf34994 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -24,16 +24,6 @@
 #include "iomux-v3.h"
 
 /*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
-	imx_map_entry(MX50, TZIC, MT_DEVICE),
-	imx_map_entry(MX50, SPBA0, MT_DEVICE),
-	imx_map_entry(MX50, AIPS1, MT_DEVICE),
-	imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
  * Define the MX51 memory map.
  */
 static struct map_desc mx51_io_desc[] __initdata = {
@@ -59,11 +49,6 @@
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
-void __init mx50_map_io(void)
-{
-	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
 void __init mx51_map_io(void)
 {
 	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
@@ -74,13 +59,6 @@
 	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
 }
 
-void __init imx50_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX50);
-	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
 /*
  * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
  * the Freescale marketing division. However this did not remove the
@@ -115,11 +93,6 @@
 	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
-void __init mx50_init_irq(void)
-{
-	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
 void __init mx51_init_irq(void)
 {
 	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
@@ -148,31 +121,10 @@
 	.script_addrs = &imx51_sdma_script,
 };
 
-static const struct resource imx50_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
 static const struct resource imx51_audmux_res[] __initconst = {
 	DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
 };
 
-void __init imx50_soc_init(void)
-{
-	mxc_device_init();
-
-	/* i.mx50 has the i.mx35 type gpio */
-	mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx35-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx35-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx35-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx35-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-
-	/* i.mx50 has the i.mx31 type audmux */
-	platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res,
-					ARRAY_SIZE(imx50_audmux_res));
-}
-
 void __init imx51_soc_init(void)
 {
 	mxc_device_init();
diff --git a/arch/arm/mach-imx/mx50.h b/arch/arm/mach-imx/mx50.h
deleted file mode 100644
index 09ac19c..0000000
--- a/arch/arm/mach-imx/mx50.h
+++ /dev/null
@@ -1,290 +0,0 @@
-#ifndef __MACH_MX50_H__
-#define __MACH_MX50_H__
-
-/*
- * IROM
- */
-#define MX50_IROM_BASE_ADDR		0x0
-#define MX50_IROM_SIZE			SZ_64K
-
-/* TZIC */
-#define MX50_TZIC_BASE_ADDR		0x0fffc000
-#define MX50_TZIC_SIZE			SZ_16K
-
-/*
- * IRAM
- */
-#define MX50_IRAM_BASE_ADDR	0xf8000000	/* internal ram */
-#define MX50_IRAM_PARTITIONS	16
-#define MX50_IRAM_SIZE		(MX50_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
-
-/*
- * Databahn
- */
-#define MX50_DATABAHN_BASE_ADDR			0x14000000
-
-/*
- * Graphics Memory of GPU
- */
-#define MX50_GPU2D_BASE_ADDR		0x20000000
-
-#define MX50_DEBUG_BASE_ADDR		0x40000000
-#define MX50_DEBUG_SIZE			SZ_1M
-#define MX50_ETB_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00001000)
-#define MX50_ETM_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00002000)
-#define MX50_TPIU_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00003000)
-#define MX50_CTI0_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00004000)
-#define MX50_CTI1_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00005000)
-#define MX50_CTI2_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00006000)
-#define MX50_CTI3_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00007000)
-#define MX50_CORTEX_DBG_BASE_ADDR	(MX50_DEBUG_BASE_ADDR + 0x00008000)
-
-#define MX50_APBHDMA_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01000000)
-#define MX50_OCOTP_CTRL_BASE_ADDR	(MX50_DEBUG_BASE_ADDR + 0x01002000)
-#define MX50_DIGCTL_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01004000)
-#define MX50_GPMI_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01006000)
-#define MX50_BCH_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01008000)
-#define MX50_ELCDIF_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100a000)
-#define MX50_EPXP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100c000)
-#define MX50_DCP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100e000)
-#define MX50_EPDC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01010000)
-#define MX50_QOSC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01012000)
-#define MX50_PERFMON_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01014000)
-#define MX50_SSP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01016000)
-#define MX50_ANATOP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01018000)
-#define MX50_NIC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x08000000)
-
-/*
- * SPBA global module enabled #0
- */
-#define MX50_SPBA0_BASE_ADDR		0x50000000
-#define MX50_SPBA0_SIZE			SZ_1M
-
-#define MX50_MMC_SDHC1_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00004000)
-#define MX50_MMC_SDHC2_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00008000)
-#define MX50_UART3_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x0000c000)
-#define MX50_CSPI1_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x00010000)
-#define MX50_SSI2_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x00014000)
-#define MX50_MMC_SDHC3_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00020000)
-#define MX50_MMC_SDHC4_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00024000)
-
-/*
- * AIPS 1
- */
-#define MX50_AIPS1_BASE_ADDR	0x53f00000
-#define MX50_AIPS1_SIZE		SZ_1M
-
-#define MX50_OTG_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00080000)
-#define MX50_GPIO1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00084000)
-#define MX50_GPIO2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00088000)
-#define MX50_GPIO3_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x0008c000)
-#define MX50_GPIO4_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00090000)
-#define MX50_KPP_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00094000)
-#define MX50_WDOG_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00098000)
-#define MX50_GPT1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a0000)
-#define MX50_SRTC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a4000)
-#define MX50_IOMUXC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a8000)
-#define MX50_EPIT1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000ac000)
-#define MX50_PWM1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000b4000)
-#define MX50_PWM2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000b8000)
-#define MX50_UART1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000bc000)
-#define MX50_UART2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000c0000)
-#define MX50_SRC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d0000)
-#define MX50_CCM_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d4000)
-#define MX50_GPC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d8000)
-#define MX50_GPIO5_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000dc000)
-#define MX50_GPIO6_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000e0000)
-#define MX50_I2C3_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000ec000)
-#define MX50_UART4_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f0000)
-
-#define MX50_MSHC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f4000)
-#define MX50_RNGB_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f8000)
-
-/*
- * AIPS 2
- */
-#define MX50_AIPS2_BASE_ADDR	0x63f00000
-#define MX50_AIPS2_SIZE		SZ_1M
-
-#define MX50_PLL1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00080000)
-#define MX50_PLL2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00084000)
-#define MX50_PLL3_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00088000)
-#define MX50_UART5_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00090000)
-#define MX50_AHBMAX_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00094000)
-#define MX50_ARM_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000a0000)
-#define MX50_OWIRE_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000a4000)
-#define MX50_CSPI2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000ac000)
-#define MX50_SDMA_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000b0000)
-#define MX50_ROMCP_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000b8000)
-#define MX50_CSPI3_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c0000)
-#define MX50_I2C2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c4000)
-#define MX50_I2C1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c8000)
-#define MX50_SSI1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000cc000)
-#define MX50_AUDMUX_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000d0000)
-#define MX50_WEIM_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000d8000)
-#define MX50_FEC_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000ec000)
-
-/*
- * Memory regions and CS
- */
-#define MX50_CSD0_BASE_ADDR		0x70000000
-#define MX50_CSD1_BASE_ADDR		0xb0000000
-#define MX50_CS0_BASE_ADDR		0xf0000000
-
-#define MX50_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX50_IO_ADDRESS(x)		IOMEM(MX50_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX50_SPBA_SDHC1		0x04
-#define MX50_SPBA_SDHC2		0x08
-#define MX50_SPBA_UART3		0x0c
-#define MX50_SPBA_CSPI1		0x10
-#define MX50_SPBA_SSI2		0x14
-#define MX50_SPBA_SDHC3		0x20
-#define MX50_SPBA_SDHC4		0x24
-#define MX50_SPBA_SPDIF		0x28
-#define MX50_SPBA_ATA		0x30
-#define MX50_SPBA_SLIM		0x34
-#define MX50_SPBA_HSI2C		0x38
-#define MX50_SPBA_CTRL		0x3c
-
-/*
- * DMA request assignments
- */
-#define MX50_DMA_REQ_GPC		1
-#define MX50_DMA_REQ_ATA_UART4_RX	2
-#define MX50_DMA_REQ_ATA_UART4_TX	3
-#define MX50_DMA_REQ_CSPI1_RX		6
-#define MX50_DMA_REQ_CSPI1_TX		7
-#define MX50_DMA_REQ_CSPI2_RX		8
-#define MX50_DMA_REQ_CSPI2_TX		9
-#define MX50_DMA_REQ_I2C3_SDHC3		10
-#define MX50_DMA_REQ_SDHC4		11
-#define MX50_DMA_REQ_UART2_FIRI_RX	12
-#define MX50_DMA_REQ_UART2_FIRI_TX	13
-#define MX50_DMA_REQ_EXT0		14
-#define MX50_DMA_REQ_EXT1		15
-#define MX50_DMA_REQ_UART5_RX		16
-#define MX50_DMA_REQ_UART5_TX		17
-#define MX50_DMA_REQ_UART1_RX		18
-#define MX50_DMA_REQ_UART1_TX		19
-#define MX50_DMA_REQ_I2C1_SDHC1		20
-#define MX50_DMA_REQ_I2C2_SDHC2		21
-#define MX50_DMA_REQ_SSI2_RX2		22
-#define MX50_DMA_REQ_SSI2_TX2		23
-#define MX50_DMA_REQ_SSI2_RX1		24
-#define MX50_DMA_REQ_SSI2_TX1		25
-#define MX50_DMA_REQ_SSI1_RX2		26
-#define MX50_DMA_REQ_SSI1_TX2		27
-#define MX50_DMA_REQ_SSI1_RX1		28
-#define MX50_DMA_REQ_SSI1_TX1		29
-#define MX50_DMA_REQ_CSPI_RX		38
-#define MX50_DMA_REQ_CSPI_TX		39
-#define MX50_DMA_REQ_UART3_RX		42
-#define MX50_DMA_REQ_UART3_TX		43
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX50_INT_MMC_SDHC1	(NR_IRQS_LEGACY + 1)
-#define MX50_INT_MMC_SDHC2	(NR_IRQS_LEGACY + 2)
-#define MX50_INT_MMC_SDHC3	(NR_IRQS_LEGACY + 3)
-#define MX50_INT_MMC_SDHC4	(NR_IRQS_LEGACY + 4)
-#define MX50_INT_DAP		(NR_IRQS_LEGACY + 5)
-#define MX50_INT_SDMA		(NR_IRQS_LEGACY + 6)
-#define MX50_INT_IOMUX		(NR_IRQS_LEGACY + 7)
-#define MX50_INT_UART4		(NR_IRQS_LEGACY + 13)
-#define MX50_INT_USB_H1		(NR_IRQS_LEGACY + 14)
-#define MX50_INT_USB_OTG	(NR_IRQS_LEGACY + 18)
-#define MX50_INT_DATABAHN	(NR_IRQS_LEGACY + 19)
-#define MX50_INT_ELCDIF		(NR_IRQS_LEGACY + 20)
-#define MX50_INT_EPXP		(NR_IRQS_LEGACY + 21)
-#define MX50_INT_SRTC_NTZ	(NR_IRQS_LEGACY + 24)
-#define MX50_INT_SRTC_TZ	(NR_IRQS_LEGACY + 25)
-#define MX50_INT_EPDC		(NR_IRQS_LEGACY + 27)
-#define MX50_INT_NIC		(NR_IRQS_LEGACY + 28)
-#define MX50_INT_SSI1		(NR_IRQS_LEGACY + 29)
-#define MX50_INT_SSI2		(NR_IRQS_LEGACY + 30)
-#define MX50_INT_UART1		(NR_IRQS_LEGACY + 31)
-#define MX50_INT_UART2		(NR_IRQS_LEGACY + 32)
-#define MX50_INT_UART3		(NR_IRQS_LEGACY + 33)
-#define MX50_INT_RESV34		(NR_IRQS_LEGACY + 34)
-#define MX50_INT_RESV35		(NR_IRQS_LEGACY + 35)
-#define MX50_INT_CSPI1		(NR_IRQS_LEGACY + 36)
-#define MX50_INT_CSPI2		(NR_IRQS_LEGACY + 37)
-#define MX50_INT_CSPI		(NR_IRQS_LEGACY + 38)
-#define MX50_INT_GPT		(NR_IRQS_LEGACY + 39)
-#define MX50_INT_EPIT1		(NR_IRQS_LEGACY + 40)
-#define MX50_INT_GPIO1_INT7	(NR_IRQS_LEGACY + 42)
-#define MX50_INT_GPIO1_INT6	(NR_IRQS_LEGACY + 43)
-#define MX50_INT_GPIO1_INT5	(NR_IRQS_LEGACY + 44)
-#define MX50_INT_GPIO1_INT4	(NR_IRQS_LEGACY + 45)
-#define MX50_INT_GPIO1_INT3	(NR_IRQS_LEGACY + 46)
-#define MX50_INT_GPIO1_INT2	(NR_IRQS_LEGACY + 47)
-#define MX50_INT_GPIO1_INT1	(NR_IRQS_LEGACY + 48)
-#define MX50_INT_GPIO1_INT0	(NR_IRQS_LEGACY + 49)
-#define MX50_INT_GPIO1_LOW	(NR_IRQS_LEGACY + 50)
-#define MX50_INT_GPIO1_HIGH	(NR_IRQS_LEGACY + 51)
-#define MX50_INT_GPIO2_LOW	(NR_IRQS_LEGACY + 52)
-#define MX50_INT_GPIO2_HIGH	(NR_IRQS_LEGACY + 53)
-#define MX50_INT_GPIO3_LOW	(NR_IRQS_LEGACY + 54)
-#define MX50_INT_GPIO3_HIGH	(NR_IRQS_LEGACY + 55)
-#define MX50_INT_GPIO4_LOW	(NR_IRQS_LEGACY + 56)
-#define MX50_INT_GPIO4_HIGH	(NR_IRQS_LEGACY + 57)
-#define MX50_INT_WDOG1		(NR_IRQS_LEGACY + 58)
-#define MX50_INT_KPP		(NR_IRQS_LEGACY + 60)
-#define MX50_INT_PWM1		(NR_IRQS_LEGACY + 61)
-#define MX50_INT_I2C1		(NR_IRQS_LEGACY + 62)
-#define MX50_INT_I2C2		(NR_IRQS_LEGACY + 63)
-#define MX50_INT_I2C3		(NR_IRQS_LEGACY + 64)
-#define MX50_INT_RESV65		(NR_IRQS_LEGACY + 65)
-#define MX50_INT_DCDC		(NR_IRQS_LEGACY + 66)
-#define MX50_INT_THERMAL_ALARM	(NR_IRQS_LEGACY + 67)
-#define MX50_INT_ANA3		(NR_IRQS_LEGACY + 68)
-#define MX50_INT_ANA4		(NR_IRQS_LEGACY + 69)
-#define MX50_INT_CCM1		(NR_IRQS_LEGACY + 71)
-#define MX50_INT_CCM2		(NR_IRQS_LEGACY + 72)
-#define MX50_INT_GPC1		(NR_IRQS_LEGACY + 73)
-#define MX50_INT_GPC2		(NR_IRQS_LEGACY + 74)
-#define MX50_INT_SRC		(NR_IRQS_LEGACY + 75)
-#define MX50_INT_NM		(NR_IRQS_LEGACY + 76)
-#define MX50_INT_PMU		(NR_IRQS_LEGACY + 77)
-#define MX50_INT_CTI_IRQ	(NR_IRQS_LEGACY + 78)
-#define MX50_INT_CTI1_TG0	(NR_IRQS_LEGACY + 79)
-#define MX50_INT_CTI1_TG1	(NR_IRQS_LEGACY + 80)
-#define MX50_INT_GPU2_IRQ	(NR_IRQS_LEGACY + 84)
-#define MX50_INT_GPU2_BUSY	(NR_IRQS_LEGACY + 85)
-#define MX50_INT_UART5		(NR_IRQS_LEGACY + 86)
-#define MX50_INT_FEC		(NR_IRQS_LEGACY + 87)
-#define MX50_INT_OWIRE		(NR_IRQS_LEGACY + 88)
-#define MX50_INT_CTI1_TG2	(NR_IRQS_LEGACY + 89)
-#define MX50_INT_SJC		(NR_IRQS_LEGACY + 90)
-#define MX50_INT_DCP_CHAN1_3	(NR_IRQS_LEGACY + 91)
-#define MX50_INT_DCP_CHAN0	(NR_IRQS_LEGACY + 92)
-#define MX50_INT_PWM2		(NR_IRQS_LEGACY + 94)
-#define MX50_INT_RNGB		(NR_IRQS_LEGACY + 97)
-#define MX50_INT_CTI1_TG3	(NR_IRQS_LEGACY + 98)
-#define MX50_INT_RAWNAND_BCH	(NR_IRQS_LEGACY + 100)
-#define MX50_INT_RAWNAND_GPMI	(NR_IRQS_LEGACY + 102)
-#define MX50_INT_GPIO5_LOW	(NR_IRQS_LEGACY + 103)
-#define MX50_INT_GPIO5_HIGH	(NR_IRQS_LEGACY + 104)
-#define MX50_INT_GPIO6_LOW	(NR_IRQS_LEGACY + 105)
-#define MX50_INT_GPIO6_HIGH	(NR_IRQS_LEGACY + 106)
-#define MX50_INT_MSHC		(NR_IRQS_LEGACY + 109)
-#define MX50_INT_APBHDMA_CHAN0	(NR_IRQS_LEGACY + 110)
-#define MX50_INT_APBHDMA_CHAN1	(NR_IRQS_LEGACY + 111)
-#define MX50_INT_APBHDMA_CHAN2	(NR_IRQS_LEGACY + 112)
-#define MX50_INT_APBHDMA_CHAN3	(NR_IRQS_LEGACY + 113)
-#define MX50_INT_APBHDMA_CHAN4	(NR_IRQS_LEGACY + 114)
-#define MX50_INT_APBHDMA_CHAN5	(NR_IRQS_LEGACY + 115)
-#define MX50_INT_APBHDMA_CHAN6	(NR_IRQS_LEGACY + 116)
-#define MX50_INT_APBHDMA_CHAN7	(NR_IRQS_LEGACY + 117)
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx50_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX50_H__ */
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index d782983..7dce17a 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -32,7 +32,6 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
-#define MXC_CPU_MX50		50
 #define MXC_CPU_MX51		51
 #define MXC_CPU_MX53		53
 
@@ -126,18 +125,6 @@
 # define cpu_is_mx35()		(0)
 #endif
 
-#ifdef CONFIG_SOC_IMX50
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX50
-# endif
-# define cpu_is_mx50()		(mxc_cpu_type == MXC_CPU_MX50)
-#else
-# define cpu_is_mx50()		(0)
-#endif
-
 #ifdef CONFIG_SOC_IMX51
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 66fae88..b2872ec 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -12,9 +12,9 @@
 
 #include <linux/init.h>
 #include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
 #include <asm/page.h>
 #include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
@@ -71,8 +71,6 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 void imx_smp_prepare(void)
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 2e063c2..f67fd7e 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -34,7 +34,7 @@
 
 /*
  * set cpu low power mode before WFI instruction. This function is called
- * mx5 because it can be used for mx50, mx51, and mx53.
+ * mx5 because it can be used for mx51, and mx53.
  */
 static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 {
@@ -85,10 +85,7 @@
 	__raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
 	__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
 	__raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
-
-	/* Enable NEON SRPG for all but MX50TO1.0. */
-	if (mx50_revision() != IMX_CHIP_REVISION_1_0)
-		__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+	__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
 
 	if (stop_mode) {
 		empgc0 |= MXC_SRPGCR_PCR;
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index f017302..62769df 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -256,7 +256,6 @@
 static struct clock_event_device clockevent_mxc = {
 	.name		= "mxc_timer1",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.set_mode	= mxc_set_mode,
 	.set_next_event	= mx1_2_set_next_event,
 	.rating		= 200,
@@ -264,21 +263,13 @@
 
 static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
-	unsigned int c = clk_get_rate(timer_clk);
-
 	if (timer_is_v2())
 		clockevent_mxc.set_next_event = v2_set_next_event;
 
-	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
-					clockevent_mxc.shift);
-	clockevent_mxc.max_delta_ns =
-			clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
-	clockevent_mxc.min_delta_ns =
-			clockevent_delta2ns(0xff, &clockevent_mxc);
-
 	clockevent_mxc.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_mxc);
+	clockevents_config_and_register(&clockevent_mxc,
+					clk_get_rate(timer_clk),
+					0xff, 0xfffffffe);
 
 	return 0;
 }
diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h
index 30452f0..8f3cc99 100644
--- a/arch/arm/mach-integrator/include/mach/uncompress.h
+++ b/arch/arm/mach-integrator/include/mach/uncompress.h
@@ -46,5 +46,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 592c168..ea96144 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -425,7 +425,7 @@
 
 #ifdef CONFIG_OF
 
-static void __init ap_init_timer_of(void)
+static void __init ap_of_timer_init(void)
 {
 	struct device_node *node;
 	const char *path;
@@ -464,10 +464,6 @@
 	integrator_clockevent_init(rate, base, irq);
 }
 
-static struct sys_timer ap_of_timer = {
-	.init		= ap_init_timer_of,
-};
-
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
 	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
 	{ /* Sentinel */ }
@@ -586,7 +582,7 @@
 	.init_early	= ap_init_early,
 	.init_irq	= ap_init_irq_of,
 	.handle_irq	= fpga_handle_irq,
-	.timer		= &ap_of_timer,
+	.init_time	= ap_of_timer_init,
 	.init_machine	= ap_init_of,
 	.restart	= integrator_restart,
 	.dt_compat      = ap_dt_board_compat,
@@ -637,7 +633,7 @@
 	.resource	= &cfi_flash_resource,
 };
 
-static void __init ap_init_timer(void)
+static void __init ap_timer_init(void)
 {
 	struct clk *clk;
 	unsigned long rate;
@@ -656,10 +652,6 @@
 				IRQ_TIMERINT1);
 }
 
-static struct sys_timer ap_timer = {
-	.init		= ap_init_timer,
-};
-
 #define INTEGRATOR_SC_VALID_INT	0x003fffff
 
 static void __init ap_init_irq(void)
@@ -716,7 +708,7 @@
 	.init_early	= ap_init_early,
 	.init_irq	= ap_init_irq,
 	.handle_irq	= fpga_handle_irq,
-	.timer		= &ap_timer,
+	.init_time	= ap_timer_init,
 	.init_machine	= ap_init,
 	.restart	= integrator_restart,
 MACHINE_END
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 01a888d..2b0db82 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -251,7 +251,7 @@
 
 #ifdef CONFIG_OF
 
-static void __init intcp_timer_init_of(void)
+static void __init cp_of_timer_init(void)
 {
 	struct device_node *node;
 	const char *path;
@@ -283,10 +283,6 @@
 	sp804_clockevents_init(base, irq, node->name);
 }
 
-static struct sys_timer cp_of_timer = {
-	.init		= intcp_timer_init_of,
-};
-
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
 	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
 	{ /* Sentinel */ }
@@ -390,7 +386,7 @@
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq_of,
 	.handle_irq	= fpga_handle_irq,
-	.timer		= &cp_of_timer,
+	.init_time	= cp_of_timer_init,
 	.init_machine	= intcp_init_of,
 	.restart	= integrator_restart,
 	.dt_compat      = intcp_dt_board_compat,
@@ -512,7 +508,7 @@
 #define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
 #define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
 
-static void __init intcp_timer_init(void)
+static void __init cp_timer_init(void)
 {
 	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
@@ -522,10 +518,6 @@
 	sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
 }
 
-static struct sys_timer cp_timer = {
-	.init		= intcp_timer_init,
-};
-
 #define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
 #define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
 
@@ -565,7 +557,7 @@
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq,
 	.handle_irq	= fpga_handle_irq,
-	.timer		= &cp_timer,
+	.init_time	= cp_timer_init,
 	.init_machine	= intcp_init,
 	.restart	= integrator_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop13xx/include/mach/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h
index fa4f805..d3791ec 100644
--- a/arch/arm/mach-iop13xx/include/mach/uncompress.h
+++ b/arch/arm/mach-iop13xx/include/mach/uncompress.h
@@ -20,4 +20,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index e3f3e7d..02a8228 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -84,17 +84,13 @@
 	iop_init_time(bus_freq);
 }
 
-static struct sys_timer iq81340mc_timer = {
-       .init       = iq81340mc_timer_init,
-};
-
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
 	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
 	.atag_offset    = 0x100,
 	.init_early     = iop13xx_init_early,
 	.map_io         = iop13xx_map_io,
 	.init_irq       = iop13xx_init_irq,
-	.timer          = &iq81340mc_timer,
+	.init_time	= iq81340mc_timer_init,
 	.init_machine   = iq81340mc_init,
 	.restart	= iop13xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index e947441..1b80f10 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -86,17 +86,13 @@
 	iop_init_time(bus_freq);
 }
 
-static struct sys_timer iq81340sc_timer = {
-       .init       = iq81340sc_timer_init,
-};
-
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
 	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
 	.atag_offset    = 0x100,
 	.init_early     = iop13xx_init_early,
 	.map_io         = iop13xx_map_io,
 	.init_irq       = iop13xx_init_irq,
-	.timer          = &iq81340sc_timer,
+	.init_time	= iq81340sc_timer_init,
 	.init_machine   = iq81340sc_init,
 	.restart	= iop13xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 9f369f0..31fbb6c 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -40,10 +40,6 @@
 	iop_init_time(200000000);
 }
 
-static struct sys_timer em7210_timer = {
-	.init		= em7210_timer_init,
-};
-
 /*
  * EM7210 RTC
  */
@@ -205,7 +201,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= em7210_map_io,
 	.init_irq	= iop32x_init_irq,
-	.timer		= &em7210_timer,
+	.init_time	= em7210_timer_init,
 	.init_machine	= em7210_init_machine,
 	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 02e20c3..ac30470 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -44,10 +44,6 @@
 	iop_init_time(200000000);
 }
 
-static struct sys_timer glantank_timer = {
-	.init		= glantank_timer_init,
-};
-
 
 /*
  * GLAN Tank I/O.
@@ -209,7 +205,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= glantank_map_io,
 	.init_irq	= iop32x_init_irq,
-	.timer		= &glantank_timer,
+	.init_time	= glantank_timer_init,
 	.init_machine	= glantank_init_machine,
 	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
index 4fd7154..b3d45fd 100644
--- a/arch/arm/mach-iop32x/include/mach/uncompress.h
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -36,4 +36,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index ddd1c7e..f2cd296 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -75,10 +75,6 @@
 	}
 }
 
-static struct sys_timer iq31244_timer = {
-	.init		= iq31244_timer_init,
-};
-
 
 /*
  * IQ31244 I/O.
@@ -314,7 +310,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
-	.timer		= &iq31244_timer,
+	.init_time	= iq31244_timer_init,
 	.init_machine	= iq31244_init_machine,
 	.restart	= iop3xx_restart,
 MACHINE_END
@@ -329,7 +325,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
-	.timer		= &iq31244_timer,
+	.init_time	= iq31244_timer_init,
 	.init_machine	= iq31244_init_machine,
 	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index bf155e6..015435d 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -43,10 +43,6 @@
 	iop_init_time(200000000);
 }
 
-static struct sys_timer iq80321_timer = {
-	.init		= iq80321_timer_init,
-};
-
 
 /*
  * IQ80321 I/O.
@@ -188,7 +184,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= iq80321_map_io,
 	.init_irq	= iop32x_init_irq,
-	.timer		= &iq80321_timer,
+	.init_time	= iq80321_timer_init,
 	.init_machine	= iq80321_init_machine,
 	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 5a7ae91..ea0984a 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -50,10 +50,6 @@
 	iop_init_time(198000000);
 }
 
-static struct sys_timer n2100_timer = {
-	.init		= n2100_timer_init,
-};
-
 
 /*
  * N2100 I/O.
@@ -337,7 +333,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= n2100_map_io,
 	.init_irq	= iop32x_init_irq,
-	.timer		= &n2100_timer,
+	.init_time	= n2100_timer_init,
 	.init_machine	= n2100_init_machine,
 	.restart	= n2100_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
index f99bb84..ed282e1 100644
--- a/arch/arm/mach-iop33x/include/mach/uncompress.h
+++ b/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -34,4 +34,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index e74a7de..c43304a 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -45,10 +45,6 @@
 		iop_init_time(266000000);
 }
 
-static struct sys_timer iq80331_timer = {
-	.init		= iq80331_timer_init,
-};
-
 
 /*
  * IQ80331 PCI.
@@ -143,7 +139,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= iop3xx_map_io,
 	.init_irq	= iop33x_init_irq,
-	.timer		= &iq80331_timer,
+	.init_time	= iq80331_timer_init,
 	.init_machine	= iq80331_init_machine,
 	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index e2f5bee..8192987 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -45,10 +45,6 @@
 		iop_init_time(266000000);
 }
 
-static struct sys_timer iq80332_timer = {
-	.init		= iq80332_timer_init,
-};
-
 
 /*
  * IQ80332 PCI.
@@ -143,7 +139,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= iop3xx_map_io,
 	.init_irq	= iop33x_init_irq,
-	.timer		= &iq80332_timer,
+	.init_time	= iq80332_timer_init,
 	.init_machine	= iq80332_init_machine,
 	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 90e42e9..6beec15 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -167,7 +167,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= avila_init,
 #if defined(CONFIG_PCI)
@@ -187,7 +187,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= avila_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 8c0c0e2..1dbeb7c 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -307,10 +307,6 @@
 	ixp4xx_clockevent_init();
 }
 
-struct sys_timer ixp4xx_timer = {
-	.init		= ixp4xx_timer_init,
-};
-
 static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
 
 void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
@@ -523,22 +519,15 @@
 	.name		= "ixp4xx timer1",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.rating         = 200,
-	.shift		= 24,
 	.set_mode	= ixp4xx_set_mode,
 	.set_next_event	= ixp4xx_set_next_event,
 };
 
 static void __init ixp4xx_clockevent_init(void)
 {
-	clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC,
-					clockevent_ixp4xx.shift);
-	clockevent_ixp4xx.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx);
-	clockevent_ixp4xx.min_delta_ns =
-		clockevent_delta2ns(0xf, &clockevent_ixp4xx);
 	clockevent_ixp4xx.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_ixp4xx);
+	clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ,
+					0xf, 0xfffffffe);
 }
 
 void ixp4xx_restart(char mode, const char *cmd)
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 1b83110..820cae8 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -112,7 +112,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= coyote_init,
 #if defined(CONFIG_PCI)
@@ -132,7 +132,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= coyote_init,
 	.restart	= ixp4xx_restart,
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 97a0af8..5d413f8 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -226,10 +226,6 @@
     ixp4xx_timer_init();
 }
 
-static struct sys_timer dsmg600_timer = {
-    .init   = dsmg600_timer_init,
-};
-
 static void __init dsmg600_init(void)
 {
 	ixp4xx_sys_init();
@@ -282,7 +278,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer          = &dsmg600_timer,
+	.init_time	= dsmg600_timer_init,
 	.init_machine	= dsmg600_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 9175a25..429966b7 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -272,7 +272,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= fsg_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 033c717..3d24b3f 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -99,7 +99,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= gateway7001_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 53b8348..e54ff49 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -498,7 +498,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= gmlr_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 18ebc6b..16a1299 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -167,7 +167,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= gtwx5715_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 5bce94a..db5afb6 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -89,8 +89,6 @@
 	void __iomem	*cs1;
 };
 
-struct sys_timer;
-
 #define IXP4XX_ETH_NPEA		0x00
 #define IXP4XX_ETH_NPEB		0x10
 #define IXP4XX_ETH_NPEC		0x20
@@ -125,7 +123,6 @@
 extern void ixp4xx_init_irq(void);
 extern void ixp4xx_sys_init(void);
 extern void ixp4xx_timer_init(void);
-extern struct sys_timer ixp4xx_timer;
 extern void ixp4xx_restart(char, const char *);
 extern void ixp4xx_pci_preinit(void);
 struct pci_sys_data;
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index eb945a9..7b25c02 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -53,6 +53,4 @@
  */
 #define arch_decomp_setup()	__arch_decomp_setup(arch_id)
 
-#define arch_decomp_wdog()
-
 #endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 108a9d3..22d688b 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -252,7 +252,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(CONFIG_PCI)
@@ -268,7 +268,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(CONFIG_PCI)
@@ -283,7 +283,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(CONFIG_PCI)
@@ -298,7 +298,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 33cb095..ed667ce 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -317,7 +317,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.init_machine	= nas100d_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index e2903fa..7e55236 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -232,10 +232,6 @@
     ixp4xx_timer_init();
 }
 
-static struct sys_timer nslu2_timer = {
-    .init   = nslu2_timer_init,
-};
-
 static void __init nslu2_init(void)
 {
 	uint8_t __iomem *f;
@@ -303,7 +299,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer          = &nslu2_timer,
+	.init_time	= nslu2_timer_init,
 	.init_machine	= nslu2_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 158ddb7..46a89f5 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -245,7 +245,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.init_machine	= omixp_init,
 	.restart	= ixp4xx_restart,
 MACHINE_END
@@ -257,7 +257,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.init_machine	= omixp_init,
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -272,7 +272,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.init_machine	= omixp_init,
 	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 2798f43..d42730a 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -239,7 +239,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= vulcan_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index a785175..8f9ea2f 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -100,7 +100,7 @@
 	.map_io		= ixp4xx_map_io,
 	.init_early	= ixp4xx_init_early,
 	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
+	.init_time	= ixp4xx_timer_init,
 	.atag_offset	= 0x100,
 	.init_machine	= wg302v2_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index de4fd2b..d4af5c1 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -183,7 +183,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= orion_dt_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.init_machine	= kirkwood_dt_init,
 	.restart	= kirkwood_restart,
 	.dt_compat	= kirkwood_dt_board_compat,
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 9f6f496..9a857ae 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/input.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index 56bfe5a..3264925 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -14,7 +14,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
index f58d2e1..970174a 100644
--- a/arch/arm/mach-kirkwood/board-nsa310.c
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -10,12 +10,10 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/i2c.h>
 #include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
+#include <linux/i2c.h>
 #include <mach/kirkwood.h>
+#include <linux/of.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -79,14 +77,10 @@
 
 void __init nsa310_init(void)
 {
-	u32 dev, rev;
-
 	kirkwood_mpp_conf(nsa310_mpp_config);
 
 	nsa310_gpio_init();
 
-	kirkwood_pcie_id(&dev, &rev);
-
 	i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
 }
 
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index bac21a5..b5ad4df 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -530,7 +530,7 @@
 	return 166666667;
 }
 
-static void __init kirkwood_timer_init(void)
+void __init kirkwood_timer_init(void)
 {
 	kirkwood_tclk = kirkwood_find_tclk();
 
@@ -538,10 +538,6 @@
 			IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
 }
 
-struct sys_timer kirkwood_timer = {
-	.init = kirkwood_timer_init,
-};
-
 /*****************************************************************************
  * Audio
  ****************************************************************************/
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5ffa57f..283ab61 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -156,7 +156,7 @@
 void kirkwood_crypto_init(void);
 
 extern int kirkwood_tclk;
-extern struct sys_timer kirkwood_timer;
+extern void kirkwood_timer_init(void);
 
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 2c1a453..4534180 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -226,6 +226,6 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index c49b177..5a369fe 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -103,6 +103,6 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 791a98f..060ccf9 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -19,7 +19,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -107,6 +106,6 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 7cb55f9..1c6e736 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -126,6 +126,6 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
index 75d5497..5bca553 100644
--- a/arch/arm/mach-kirkwood/include/mach/uncompress.h
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h
@@ -44,4 +44,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 6d8364a..ba384b9 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -167,6 +167,6 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 728e86d..3b70661 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -263,7 +263,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
@@ -275,7 +275,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
@@ -287,7 +287,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index a3b0914..913d032 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -404,7 +404,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
@@ -416,7 +416,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 7e81e9b..8ddd69f 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -221,7 +221,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
@@ -234,7 +234,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
@@ -247,7 +247,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 19072c8..e4fd312 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -84,6 +84,6 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 9717101..c7d93b4 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -120,6 +120,6 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 8a17594..55b68fa 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -143,7 +143,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
@@ -155,7 +155,7 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index f2daf71..8736f8c 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -211,6 +211,6 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 73e2b6c..283abff 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -137,6 +137,6 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index e4c6127..81d5858 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -181,6 +181,6 @@
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
+	.init_time	= kirkwood_timer_init,
 	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index b0c306c..456d638 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -227,6 +227,6 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= acs5k_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart	= ks8695_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index e0d36ce..d37c218 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -125,6 +125,6 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= dsm320_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart	= ks8695_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index a827072..3acbdfd 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -57,6 +57,6 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= micrel_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart	= ks8695_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
index 1623ba4..002bc61 100644
--- a/arch/arm/mach-ks8695/board-og.c
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -145,7 +145,7 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= og_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart        = ks8695_restart,
 MACHINE_END
 #endif
@@ -157,7 +157,7 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= og_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart        = ks8695_restart,
 MACHINE_END
 #endif
@@ -169,7 +169,7 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= og_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart        = ks8695_restart,
 MACHINE_END
 #endif
@@ -181,7 +181,7 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= og_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart        = ks8695_restart,
 MACHINE_END
 #endif
@@ -193,7 +193,7 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= og_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart        = ks8695_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c
index f35b98b..fdf2352 100644
--- a/arch/arm/mach-ks8695/board-sg.c
+++ b/arch/arm/mach-ks8695/board-sg.c
@@ -91,7 +91,7 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= sg_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart	= ks8695_restart,
 MACHINE_END
 #endif
@@ -103,7 +103,7 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= sg_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart	= ks8695_restart,
 MACHINE_END
 #endif
@@ -115,7 +115,7 @@
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= sg_init,
-	.timer		= &ks8695_timer,
+	.init_time	= ks8695_timer_init,
 	.restart	= ks8695_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h
index f8bdb11..6e97ce4 100644
--- a/arch/arm/mach-ks8695/generic.h
+++ b/arch/arm/mach-ks8695/generic.h
@@ -13,4 +13,4 @@
 extern __init void ks8695_map_io(void);
 extern __init void ks8695_init_irq(void);
 extern void ks8695_restart(char, const char *);
-extern struct sys_timer ks8695_timer;
+extern void ks8695_timer_init(void);
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
index 8879d61..c089a1a 100644
--- a/arch/arm/mach-ks8695/include/mach/uncompress.h
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -32,6 +32,5 @@
 }
 
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
 
 #endif
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 46c84bc..c272a386 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -146,7 +146,7 @@
 					0xFFFFFFFFU);
 }
 
-static void __init ks8695_timer_init (void)
+void __init ks8695_timer_init(void)
 {
 	ks8695_timer_setup();
 
@@ -154,10 +154,6 @@
 	setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq);
 }
 
-struct sys_timer ks8695_timer = {
-	.init		= ks8695_timer_init,
-};
-
 void ks8695_restart(char mode, const char *cmd)
 {
 	unsigned int reg;
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index afeac3b..e0b2606 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -25,7 +25,7 @@
 /*
  * Other arch specific structures and functions
  */
-extern struct sys_timer lpc32xx_timer;
+extern void lpc32xx_timer_init(void);
 extern void __init lpc32xx_init_irq(void);
 extern void __init lpc32xx_map_io(void);
 extern void __init lpc32xx_serial_init(void);
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
index c142487..1198a89 100644
--- a/arch/arm/mach-lpc32xx/include/mach/uncompress.h
+++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
@@ -55,6 +55,5 @@
 
 /* NULL functions; we don't presently need them */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
 
 #endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index e8ff4c3..c1cd5a9 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -263,7 +263,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= lpc32xx_map_io,
 	.init_irq	= lpc32xx_init_irq,
-	.timer		= &lpc32xx_timer,
+	.init_time	= lpc32xx_timer_init,
 	.init_machine	= lpc3250_machine_init,
 	.dt_compat	= lpc32xx_dt_compat,
 	.restart	= lpc23xx_restart,
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
index c40667c..20eab63 100644
--- a/arch/arm/mach-lpc32xx/timer.c
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -70,7 +70,6 @@
 static struct clock_event_device lpc32xx_clkevt = {
 	.name		= "lpc32xx_clkevt",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 300,
 	.set_next_event	= lpc32xx_clkevt_next_event,
 	.set_mode	= lpc32xx_clkevt_mode,
@@ -100,7 +99,7 @@
  * clocks need to be enabled here manually and then tagged as used in
  * the clock driver initialization
  */
-static void __init lpc32xx_timer_init(void)
+void __init lpc32xx_timer_init(void)
 {
 	u32 clkrate, pllreg;
 
@@ -141,14 +140,8 @@
 	setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
 
 	/* Setup the clockevent structure. */
-	lpc32xx_clkevt.mult = div_sc(clkrate, NSEC_PER_SEC,
-		lpc32xx_clkevt.shift);
-	lpc32xx_clkevt.max_delta_ns = clockevent_delta2ns(-1,
-		&lpc32xx_clkevt);
-	lpc32xx_clkevt.min_delta_ns = clockevent_delta2ns(1,
-		&lpc32xx_clkevt) + 1;
 	lpc32xx_clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&lpc32xx_clkevt);
+	clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1);
 
 	/* Use timer1 as clock source. */
 	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
@@ -161,8 +154,3 @@
 	clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
 		"lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
 }
-
-struct sys_timer lpc32xx_timer = {
-	.init		= &lpc32xx_timer_init,
-};
-
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index e5dba9c..9f64d56 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -262,7 +262,7 @@
 	.map_io		= mmp_map_io,
 	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa168_init_irq,
-	.timer          = &pxa168_timer,
+	.init_time	= pxa168_timer_init,
 	.init_machine   = common_init,
 	.restart	= pxa168_restart,
 MACHINE_END
@@ -271,7 +271,7 @@
 	.map_io		= mmp_map_io,
 	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa168_init_irq,
-	.timer          = &pxa168_timer,
+	.init_time	= pxa168_timer_init,
 	.init_machine   = common_init,
 	.restart	= pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 603542a..1f94957 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -45,7 +45,7 @@
 	.map_io		= mmp_map_io,
 	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa168_init_irq,
-	.timer          = &pxa168_timer,
+	.init_time	= pxa168_timer_init,
 	.init_machine   = avengers_lite_init,
 	.restart	= pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 5cb769c..2358011 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -218,7 +218,7 @@
 	.map_io		= mmp_map_io,
 	.nr_irqs	= BROWNSTONE_NR_IRQS,
 	.init_irq	= mmp2_init_irq,
-	.timer		= &mmp2_timer,
+	.init_time	= mmp2_timer_init,
 	.init_machine	= brownstone_init,
 	.restart	= mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index bd45327..0bdc50b 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -1,7 +1,5 @@
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
-struct sys_timer;
-
 extern void timer_init(int irq);
 
 extern void __init icu_init_irq(void);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index 8059cc0..754c352 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -121,7 +121,7 @@
 	.map_io		= mmp_map_io,
 	.nr_irqs	= FLINT_NR_IRQS,
 	.init_irq       = mmp2_init_irq,
-	.timer          = &mmp2_timer,
+	.init_time	= mmp2_timer_init,
 	.init_machine   = flint_init,
 	.restart	= mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 5c3d61e..d1e2d59 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -194,7 +194,7 @@
 	.map_io		= mmp_map_io,
 	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa168_init_irq,
-	.timer          = &pxa168_timer,
+	.init_time	= pxa168_timer_init,
 	.init_machine   = gplugd_init,
 	.restart	= pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index c4ca4d1..0764f4e 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -3,9 +3,7 @@
 
 #include <linux/platform_data/pxa_sdhci.h>
 
-struct sys_timer;
-
-extern struct sys_timer mmp2_timer;
+extern void mmp2_timer_init(void);
 extern void __init mmp2_init_icu(void);
 extern void __init mmp2_init_irq(void);
 extern void mmp2_clear_pmic_int(void);
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 37632d9..7ed1df2 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,9 +1,7 @@
 #ifndef __ASM_MACH_PXA168_H
 #define __ASM_MACH_PXA168_H
 
-struct sys_timer;
-
-extern struct sys_timer pxa168_timer;
+extern void pxa168_timer_init(void);
 extern void __init pxa168_init_irq(void);
 extern void pxa168_restart(char, const char *);
 extern void pxa168_clear_keypad_wakeup(void);
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 3b58a3b..eff31ab 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,9 +1,7 @@
 #ifndef __ASM_MACH_PXA910_H
 #define __ASM_MACH_PXA910_H
 
-struct sys_timer;
-
-extern struct sys_timer pxa910_timer;
+extern void pxa910_timer_init(void);
 extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
index d6daeb7..8890fa8 100644
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -43,9 +43,3 @@
 	if (machine_is_avengers_lite())
 		UART = (unsigned long *)UART3_BASE;
 }
-
-/*
- * nothing to do
- */
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index ff73249..66634fd 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -174,7 +174,7 @@
 	.map_io		= mmp_map_io,
 	.nr_irqs	= JASPER_NR_IRQS,
 	.init_irq       = mmp2_init_irq,
-	.timer          = &mmp2_timer,
+	.init_time	= mmp2_timer_init,
 	.init_machine   = jasper_init,
 	.restart	= mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index 033cc31..d063efa 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -22,10 +22,6 @@
 extern void __init mmp_dt_irq_init(void);
 extern void __init mmp_dt_init_timer(void);
 
-static struct sys_timer mmp_dt_timer = {
-	.init	= mmp_dt_init_timer,
-};
-
 static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
@@ -69,7 +65,7 @@
 DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
 	.map_io		= mmp_map_io,
 	.init_irq	= mmp_dt_irq_init,
-	.timer		= &mmp_dt_timer,
+	.init_time	= mmp_dt_init_timer,
 	.init_machine	= pxa168_dt_init,
 	.dt_compat	= mmp_dt_board_compat,
 MACHINE_END
@@ -77,7 +73,7 @@
 DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
 	.map_io		= mmp_map_io,
 	.init_irq	= mmp_dt_irq_init,
-	.timer		= &mmp_dt_timer,
+	.init_time	= mmp_dt_init_timer,
 	.init_machine	= pxa910_dt_init,
 	.dt_compat	= mmp_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 535a5ed..fad431a 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -24,10 +24,6 @@
 extern void __init mmp_dt_irq_init(void);
 extern void __init mmp_dt_init_timer(void);
 
-static struct sys_timer mmp_dt_timer = {
-	.init	= mmp_dt_init_timer,
-};
-
 static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
@@ -54,7 +50,7 @@
 DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
 	.map_io		= mmp_map_io,
 	.init_irq	= mmp_dt_irq_init,
-	.timer		= &mmp_dt_timer,
+	.init_time	= mmp_dt_init_timer,
 	.init_machine	= mmp2_dt_init,
 	.dt_compat	= mmp2_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 3a3768c..d94d114 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -114,7 +114,7 @@
 
 #define APBC_TIMERS	APBC_REG(0x024)
 
-static void __init mmp2_timer_init(void)
+void __init mmp2_timer_init(void)
 {
 	unsigned long clk_rst;
 
@@ -130,10 +130,6 @@
 	timer_init(IRQ_MMP2_TIMER1);
 }
 
-struct sys_timer mmp2_timer = {
-	.init	= mmp2_timer_init,
-};
-
 /* on-chip devices */
 MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
 MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index b7f074f..9bc7b86 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -67,7 +67,7 @@
 #define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
 #define APBC_TIMERS	APBC_REG(0x34)
 
-static void __init pxa168_timer_init(void)
+void __init pxa168_timer_init(void)
 {
 	/* this is early, we have to initialize the CCU registers by
 	 * ourselves instead of using clk_* API. Clock rate is defined
@@ -81,10 +81,6 @@
 	timer_init(IRQ_PXA168_TIMER1);
 }
 
-struct sys_timer pxa168_timer = {
-	.init	= pxa168_timer_init,
-};
-
 void pxa168_clear_keypad_wakeup(void)
 {
 	uint32_t val;
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 8b1e16f..c6a89f1 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -101,7 +101,7 @@
 #define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
 #define APBC_TIMERS	APBC_REG(0x34)
 
-static void __init pxa910_timer_init(void)
+void __init pxa910_timer_init(void)
 {
 	/* reset and configure */
 	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
@@ -110,10 +110,6 @@
 	timer_init(IRQ_PXA910_AP1_TIMER1);
 }
 
-struct sys_timer pxa910_timer = {
-	.init	= pxa910_timer_init,
-};
-
 /* on-chip devices */
 
 /* NOTE: there are totally 3 UARTs on PXA910:
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index b28f908..4c127d2 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -103,7 +103,7 @@
 	.map_io		= mmp_map_io,
 	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa910_init_irq,
-	.timer          = &pxa910_timer,
+	.init_time	= pxa910_timer_init,
 	.init_machine   = tavorevb_init,
 	.restart	= mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index dd30ea7..8609967 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -86,7 +86,7 @@
 	.map_io		= mmp_map_io,
 	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa168_init_irq,
-	.timer          = &pxa168_timer,
+	.init_time	= pxa168_timer_init,
 	.init_machine   = teton_bga_init,
 	.restart	= pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 936447c..86a18b3 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -141,7 +141,6 @@
 static struct clock_event_device ckevt = {
 	.name		= "clockevent",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 200,
 	.set_next_event	= timer_set_next_event,
 	.set_mode	= timer_set_mode,
@@ -198,15 +197,13 @@
 
 	setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
 
-	ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
-	ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
-	ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
 	ckevt.cpumask = cpumask_of(0);
 
 	setup_irq(irq, &timer_irq);
 
 	clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
-	clockevents_register_device(&ckevt);
+	clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE,
+					MIN_DELTA, MAX_DELTA);
 }
 
 #ifdef CONFIG_OF
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index ce55fd8..6e47490 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -218,7 +218,7 @@
 	.map_io		= mmp_map_io,
 	.nr_irqs	= TTCDKB_NR_IRQS,
 	.init_irq       = pxa910_init_irq,
-	.timer          = &pxa910_timer,
+	.init_time	= pxa910_timer_init,
 	.init_machine   = ttc_dkb_init,
 	.restart	= mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
index b5b4de2..7dcfc53 100644
--- a/arch/arm/mach-msm/board-dt-8660.c
+++ b/arch/arm/mach-msm/board-dt-8660.c
@@ -11,26 +11,15 @@
  */
 
 #include <linux/init.h>
+#include <linux/irqchip.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/board.h>
 #include "common.h"
 
-static const struct of_device_id msm_dt_gic_match[] __initconst = {
-	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
-	{}
-};
-
-static void __init msm8x60_init_irq(void)
-{
-	of_irq_init(msm_dt_gic_match);
-}
-
 static void __init msm8x60_init_late(void)
 {
 	smd_debugfs_init();
@@ -55,10 +44,9 @@
 DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
 	.smp = smp_ops(msm_smp_ops),
 	.map_io = msm_map_msm8x60_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
+	.init_irq = irqchip_init,
 	.init_machine = msm8x60_dt_init,
 	.init_late = msm8x60_init_late,
-	.timer = &msm_dt_timer,
+	.init_time	= msm_dt_timer_init,
 	.dt_compat = msm8x60_fluid_match,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c
index 4490edb..7301936 100644
--- a/arch/arm/mach-msm/board-dt-8960.c
+++ b/arch/arm/mach-msm/board-dt-8960.c
@@ -11,24 +11,13 @@
  */
 
 #include <linux/init.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 
 #include "common.h"
 
-static const struct of_device_id msm_dt_gic_match[] __initconst = {
-	{ .compatible = "qcom,msm-qgic2", .data = gic_of_init },
-	{ }
-};
-
-static void __init msm_dt_init_irq(void)
-{
-	of_irq_init(msm_dt_gic_match);
-}
-
 static void __init msm_dt_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -42,9 +31,8 @@
 DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
 	.smp = smp_ops(msm_smp_ops),
 	.map_io = msm_map_msm8960_io,
-	.init_irq = msm_dt_init_irq,
-	.timer = &msm_dt_timer,
+	.init_irq = irqchip_init,
+	.init_time	= msm_dt_timer_init,
 	.init_machine = msm_dt_init,
 	.dt_compat = msm8960_dt_match,
-	.handle_irq = gic_handle_irq,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 6ce542e..84d720a 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -106,5 +106,5 @@
 	.init_irq	= halibut_init_irq,
 	.init_machine	= halibut_init,
 	.init_late	= halibut_init_late,
-	.timer		= &msm7x01_timer,
+	.init_time	= msm7x01_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index df00bc0..30c3496 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -75,7 +75,7 @@
 	smd_debugfs_init();
 }
 
-extern struct sys_timer msm_timer;
+void msm_timer_init(void);
 
 MACHINE_START(MAHIMAHI, "mahimahi")
 	.atag_offset	= 0x100,
@@ -84,5 +84,5 @@
 	.init_irq	= msm_init_irq,
 	.init_machine	= mahimahi_init,
 	.init_late	= mahimahi_init_late,
-	.timer		= &msm_timer,
+	.init_time	= msm_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index effa6f4..7bc3f82 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -131,7 +131,7 @@
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
 	.init_late = msm7x30_init_late,
-	.timer = &msm7x30_timer,
+	.init_time	= msm7x30_timer_init,
 MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
@@ -142,7 +142,7 @@
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
 	.init_late = msm7x30_init_late,
-	.timer = &msm7x30_timer,
+	.init_time	= msm7x30_timer_init,
 MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
@@ -153,5 +153,5 @@
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
 	.init_late = msm7x30_init_late,
-	.timer = &msm7x30_timer,
+	.init_time	= msm7x30_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 2448fcf..686e794 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -200,7 +200,7 @@
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
 	.init_late = qsd8x50_init_late,
-	.timer = &qsd8x50_timer,
+	.init_time	= qsd8x50_timer_init,
 MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
@@ -209,5 +209,5 @@
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
 	.init_late = qsd8x50_init_late,
-	.timer = &qsd8x50_timer,
+	.init_time	= qsd8x50_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index b7b0fc7..7073011 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -53,7 +53,7 @@
 	&msm_device_uart3,
 };
 
-extern struct sys_timer msm_timer;
+void msm_timer_init(void);
 
 static void __init sapphire_init_irq(void)
 {
@@ -113,5 +113,5 @@
 	.init_irq       = sapphire_init_irq,
 	.init_machine   = sapphire_init,
 	.init_late      = sapphire_init_late,
-	.timer          = &msm_timer,
+	.init_time	= msm_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 4ba0800..919bfa3 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -110,5 +110,5 @@
 	.init_irq	= trout_init_irq,
 	.init_machine	= trout_init,
 	.init_late	= trout_init_late,
-	.timer		= &msm7x01_timer,
+	.init_time	= msm7x01_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index 633a7159..ce8215a 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -12,10 +12,10 @@
 #ifndef __MACH_COMMON_H
 #define __MACH_COMMON_H
 
-extern struct sys_timer msm7x01_timer;
-extern struct sys_timer msm7x30_timer;
-extern struct sys_timer msm_dt_timer;
-extern struct sys_timer qsd8x50_timer;
+extern void msm7x01_timer_init(void);
+extern void msm7x30_timer_init(void);
+extern void msm_dt_timer_init(void);
+extern void qsd8x50_timer_init(void);
 
 extern void msm_map_common_io(void);
 extern void msm_map_msm7x30_io(void);
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index c14011f..fa97a10 100644
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -60,8 +60,4 @@
 {
 }
 
-static inline void arch_decomp_wdog(void)
-{
-}
-
 #endif
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 7ed69b69..42932865 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -15,8 +15,8 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
@@ -115,7 +115,7 @@
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 */
-	gic_raise_softirq(cpumask_of(cpu), 0);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -153,8 +153,6 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 476549a..2969027 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -25,7 +25,6 @@
 #include <linux/of_irq.h>
 
 #include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
 #include <asm/localtimer.h>
 #include <asm/sched_clock.h>
 
@@ -144,13 +143,9 @@
 	evt->rating = msm_clockevent.rating;
 	evt->set_mode = msm_timer_set_mode;
 	evt->set_next_event = msm_timer_set_next_event;
-	evt->shift = msm_clockevent.shift;
-	evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift);
-	evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt);
-	evt->min_delta_ns = clockevent_delta2ns(4, evt);
 
 	*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
-	clockevents_register_device(evt);
+	clockevents_config_and_register(evt, GPT_HZ, 4, 0xf0000000);
 	enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
 	return 0;
 }
@@ -229,7 +224,7 @@
 	{ },
 };
 
-static void __init msm_dt_timer_init(void)
+void __init msm_dt_timer_init(void)
 {
 	struct device_node *np;
 	u32 freq;
@@ -296,10 +291,6 @@
 
 	msm_timer_init(freq, 32, irq, !!percpu_offset);
 }
-
-struct sys_timer msm_dt_timer = {
-	.init = msm_dt_timer_init
-};
 #endif
 
 static int __init msm_timer_map(phys_addr_t event, phys_addr_t source)
@@ -317,7 +308,7 @@
 	return 0;
 }
 
-static void __init msm7x01_timer_init(void)
+void __init msm7x01_timer_init(void)
 {
 	struct clocksource *cs = &msm_clocksource;
 
@@ -330,28 +321,16 @@
 			false);
 }
 
-struct sys_timer msm7x01_timer = {
-	.init = msm7x01_timer_init
-};
-
-static void __init msm7x30_timer_init(void)
+void __init msm7x30_timer_init(void)
 {
 	if (msm_timer_map(0xc0100004, 0xc0100024))
 		return;
 	msm_timer_init(24576000 / 4, 32, 1, false);
 }
 
-struct sys_timer msm7x30_timer = {
-	.init = msm7x30_timer_init
-};
-
-static void __init qsd8x50_timer_init(void)
+void __init qsd8x50_timer_init(void)
 {
 	if (msm_timer_map(0xAC100000, 0xAC100010))
 		return;
 	msm_timer_init(19200000 / 4, 32, 7, false);
 }
-
-struct sys_timer qsd8x50_timer = {
-	.init = qsd8x50_timer_init
-};
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index ee74ec9..1f2ef98 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -150,6 +150,6 @@
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
-	.timer		= &mv78xx0_timer,
+	.init_time	= mv78xx0_timer_init,
 	.restart	= mv78xx0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index d0cb485..0efa1449 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -336,16 +336,12 @@
 	orion_time_set_base(TIMER_VIRT_BASE);
 }
 
-static void __init_refok mv78xx0_timer_init(void)
+void __init_refok mv78xx0_timer_init(void)
 {
 	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
 			IRQ_MV78XX0_TIMER_1, get_tclk());
 }
 
-struct sys_timer mv78xx0_timer = {
-	.init = mv78xx0_timer_init,
-};
-
 
 /*****************************************************************************
  * General
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 507c767..5e9485b 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -47,7 +47,7 @@
 void mv78xx0_i2c_init(void);
 void mv78xx0_restart(char, const char *);
 
-extern struct sys_timer mv78xx0_timer;
+extern void mv78xx0_timer_init(void);
 
 
 #endif
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 4d6d48b..4e0f22b 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -98,6 +98,6 @@
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
-	.timer		= &mv78xx0_timer,
+	.init_time	= mv78xx0_timer_init,
 	.restart	= mv78xx0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
index 3652642..6a761c4 100644
--- a/arch/arm/mach-mv78xx0/include/mach/uncompress.h
+++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
@@ -44,4 +44,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index 9a88270..d2d06f3 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -83,6 +83,6 @@
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
-	.timer		= &mv78xx0_timer,
+	.init_time	= mv78xx0_timer_init,
 	.restart	= mv78xx0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 7434b5e..a5ea616d 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -56,10 +56,6 @@
 	init_dma_coherent_pool_size(SZ_1M);
 }
 
-struct sys_timer armada_370_xp_timer = {
-	.init		= armada_370_xp_timer_and_clk_init,
-};
-
 static void __init armada_370_xp_dt_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -78,7 +74,7 @@
 	.init_early	= armada_370_xp_init_early,
 	.init_irq	= armada_370_xp_init_irq,
 	.handle_irq     = armada_370_xp_handle_irq,
-	.timer		= &armada_370_xp_timer,
+	.init_time	= armada_370_xp_timer_and_clk_init,
 	.restart	= mvebu_restart,
 	.dt_compat	= armada_370_xp_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index ef28114..533f518 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -72,6 +72,5 @@
 }
 
 #define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
 
 #endif /* __MACH_MXS_UNCOMPRESS_H__ */
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index c66129b..5fad7ce 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -163,19 +163,11 @@
 	mx23_clocks_init();
 }
 
-static struct sys_timer imx23_timer = {
-	.init = imx23_timer_init,
-};
-
 static void __init imx28_timer_init(void)
 {
 	mx28_clocks_init();
 }
 
-static struct sys_timer imx28_timer = {
-	.init = imx28_timer_init,
-};
-
 enum mac_oui {
 	OUI_FSL,
 	OUI_DENX,
@@ -446,7 +438,7 @@
 	.map_io		= mx23_map_io,
 	.init_irq	= icoll_init_irq,
 	.handle_irq	= icoll_handle_irq,
-	.timer		= &imx23_timer,
+	.init_time	= imx23_timer_init,
 	.init_machine	= mxs_machine_init,
 	.dt_compat	= imx23_dt_compat,
 	.restart	= mxs_restart,
@@ -456,7 +448,7 @@
 	.map_io		= mx28_map_io,
 	.init_irq	= icoll_init_irq,
 	.handle_irq	= icoll_handle_irq,
-	.timer		= &imx28_timer,
+	.init_time	= imx28_timer_init,
 	.init_machine	= mxs_machine_init,
 	.dt_compat	= imx28_dt_compat,
 	.restart	= mxs_restart,
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 856f4c7..27451b1 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -195,7 +195,6 @@
 static struct clock_event_device mxs_clockevent_device = {
 	.name		= "mxs_timrot",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.set_mode	= mxs_set_mode,
 	.set_next_event	= timrotv2_set_next_event,
 	.rating		= 200,
@@ -203,25 +202,12 @@
 
 static int __init mxs_clockevent_init(struct clk *timer_clk)
 {
-	unsigned int c = clk_get_rate(timer_clk);
-
-	mxs_clockevent_device.mult =
-		div_sc(c, NSEC_PER_SEC, mxs_clockevent_device.shift);
-	mxs_clockevent_device.cpumask = cpumask_of(0);
-	if (timrot_is_v1()) {
+	if (timrot_is_v1())
 		mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
-		mxs_clockevent_device.max_delta_ns =
-			clockevent_delta2ns(0xfffe, &mxs_clockevent_device);
-		mxs_clockevent_device.min_delta_ns =
-			clockevent_delta2ns(0xf, &mxs_clockevent_device);
-	} else {
-		mxs_clockevent_device.max_delta_ns =
-			clockevent_delta2ns(0xfffffffe, &mxs_clockevent_device);
-		mxs_clockevent_device.min_delta_ns =
-			clockevent_delta2ns(0xf, &mxs_clockevent_device);
-	}
-
-	clockevents_register_device(&mxs_clockevent_device);
+	mxs_clockevent_device.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&mxs_clockevent_device,
+					clk_get_rate(timer_clk), 0xf,
+					timrot_is_v1() ? 0xfffe : 0xfffffffe);
 
 	return 0;
 }
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index aa62746..27c2cb7 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -23,9 +23,9 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-vic.h>
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h
index 9b91511..768b26b 100644
--- a/arch/arm/mach-netx/generic.h
+++ b/arch/arm/mach-netx/generic.h
@@ -21,5 +21,4 @@
 extern void __init netx_init_irq(void);
 extern void netx_restart(char, const char *);
 
-struct sys_timer;
-extern struct sys_timer netx_timer;
+extern void netx_timer_init(void);
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
index 84f9128..5cb1051b 100644
--- a/arch/arm/mach-netx/include/mach/uncompress.h
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -73,4 +73,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 8b781ff..9b558eb 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -28,7 +28,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <linux/platform_data/eth-netx.h>
 
@@ -204,8 +203,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &netx_timer,
+	.init_time	= netx_timer_init,
 	.init_machine	= nxdb500_init,
 	.restart	= netx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index b26dbce..a5e86cd 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -28,7 +28,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <linux/platform_data/eth-netx.h>
 
@@ -97,8 +96,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &netx_timer,
+	.init_time	= netx_timer_init,
 	.init_machine	= nxdkn_init,
 	.restart	= netx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 257382e..ad17885 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -28,7 +28,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <linux/platform_data/eth-netx.h>
 
@@ -181,8 +180,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &netx_timer,
+	.init_time	= netx_timer_init,
 	.init_machine	= nxeb500hmi_init,
 	.restart	= netx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index e24c141..6df42e6 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -76,7 +76,6 @@
 
 static struct clock_event_device netx_clockevent = {
 	.name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
-	.shift = 32,
 	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_next_event = netx_set_next_event,
 	.set_mode = netx_set_mode,
@@ -107,7 +106,7 @@
 /*
  * Set up timer interrupt
  */
-static void __init netx_timer_init(void)
+void __init netx_timer_init(void)
 {
 	/* disable timer initially */
 	writel(0, NETX_GPIO_COUNTER_CTRL(0));
@@ -140,18 +139,9 @@
 	clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
 		"netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up);
 
-	netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
-			netx_clockevent.shift);
-	netx_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &netx_clockevent);
 	/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
 	 * Adding some safety ... */
-	netx_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xa00, &netx_clockevent);
 	netx_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&netx_clockevent);
+	clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE,
+					0xa00, 0xfffffffe);
 }
-
-struct sys_timer netx_timer = {
-	.init		= netx_timer_init,
-};
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9f19069..aaed48d 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,7 +27,6 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -267,10 +266,6 @@
 	nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
 }
 
-static struct sys_timer nomadik_timer = {
-	.init	= nomadik_timer_init,
-};
-
 static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
 	{
 		I2C_BOARD_INFO("stw4811", 0x2d),
@@ -352,8 +347,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= cpu8815_map_io,
 	.init_irq	= cpu8815_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &nomadik_timer,
+	.init_time	= nomadik_timer_init,
 	.init_machine	= nhk8815_platform_init,
 	.restart	= cpu8815_restart,
 MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 1273931..35140467 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -25,13 +25,13 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
+#include <linux/irqchip/arm-vic.h>
 #include <linux/platform_data/clk-nomadik.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
index 7d4687e..f527af6 100644
--- a/arch/arm/mach-nomadik/include/mach/uncompress.h
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -58,6 +58,4 @@
 {
 }
 
-#define arch_decomp_wdog() /* nothing to do here */
-
 #endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2e98a3a..2aab761 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -628,6 +628,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= ams_delta_init,
 	.init_late	= ams_delta_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 560a7dc..702d580 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -364,6 +364,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_fsample_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 608e7d2..e1d9171 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -84,6 +84,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 2274bd6..0dac3d2 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -461,6 +461,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h2_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 1051935..816ecd1 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -454,6 +454,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h3_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 356f816..35a2379 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -603,6 +603,6 @@
 	.init_irq       = omap1_init_irq,
 	.init_machine   = htcherald_init,
 	.init_late	= omap1_init_late,
-	.timer          = &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index f8033fa..bd5f02e 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -458,6 +458,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= innovator_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 24d2f2d..4695ca7 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -242,6 +242,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_nokia770_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 872ea47..a7ce692 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -609,6 +609,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= osk_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index c33dceb..845a1a7 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -268,6 +268,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmte_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 2948b0e..65a4a3e 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -314,6 +314,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmtt_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 7a05895..01c9700 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -330,6 +330,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmz71_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 27f8d12..8b2f712 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -326,6 +326,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_perseus2_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 20ed52a..9732a98 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -407,6 +407,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_sx1_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index abf705f..6c116e1 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -289,6 +289,6 @@
 	.init_irq	= omap1_init_irq,
 	.init_machine	= voiceblue_init,
 	.init_late	= omap1_init_late,
-	.timer		= &omap1_timer,
+	.init_time	= omap1_timer_init,
 	.restart	= voiceblue_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index b53e085..fb18831 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -75,7 +75,7 @@
 extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 			       unsigned int ctrl);
 
-extern struct sys_timer omap1_timer;
+extern void omap1_timer_init(void);
 #ifdef CONFIG_OMAP_32K_TIMER
 extern int omap_32k_timer_init(void);
 #else
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
index ad6fbe7..4869633 100644
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -115,8 +115,3 @@
 		DEBUG_LL_OMAP1(3, sx1);
 	} while (0);
 }
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4d4816f..726ec23 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -145,7 +145,6 @@
 static struct clock_event_device clockevent_mpu_timer1 = {
 	.name		= "mpu_timer1",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.set_next_event	= omap_mpu_set_next_event,
 	.set_mode	= omap_mpu_set_mode,
 };
@@ -170,15 +169,9 @@
 	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
 
-	clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
-					    clockevent_mpu_timer1.shift);
-	clockevent_mpu_timer1.max_delta_ns =
-		clockevent_delta2ns(-1, &clockevent_mpu_timer1);
-	clockevent_mpu_timer1.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_mpu_timer1);
-
 	clockevent_mpu_timer1.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_mpu_timer1);
+	clockevents_config_and_register(&clockevent_mpu_timer1, rate,
+					1, -1);
 }
 
 
@@ -236,12 +229,8 @@
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-static void __init omap1_timer_init(void)
+void __init omap1_timer_init(void)
 {
 	if (omap_32k_timer_init() != 0)
 		omap_mpu_timer_init();
 }
-
-struct sys_timer omap1_timer = {
-	.init		= omap1_timer_init,
-};
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 41152fa..0b74246 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -140,7 +140,6 @@
 static struct clock_event_device clockevent_32k_timer = {
 	.name		= "32k-timer",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.set_next_event	= omap_32k_timer_set_next_event,
 	.set_mode	= omap_32k_timer_set_mode,
 };
@@ -165,16 +164,9 @@
 {
 	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
 
-	clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC,
-					   NSEC_PER_SEC,
-					   clockevent_32k_timer.shift);
-	clockevent_32k_timer.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_32k_timer);
-	clockevent_32k_timer.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_32k_timer);
-
 	clockevent_32k_timer.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_32k_timer);
+	clockevents_config_and_register(&clockevent_32k_timer,
+					OMAP_32K_TICKS_PER_SEC, 1, 0xfffffffe);
 }
 
 /*
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1337f2c..a3e0aaa 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -286,6 +286,6 @@
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_2430sdp_init,
 	.init_late	= omap2430_init_late,
-	.timer		= &omap2_timer,
+	.init_time	= omap2_sync32k_timer_init,
 	.restart	= omap2xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 8a2e242..e71ebde 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -599,6 +599,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_3430sdp_init,
 	.init_late	= omap3430_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 050aaa7..3384627 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -211,6 +211,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_sdp_init,
 	.init_late	= omap3630_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 8e8efcc..508e275 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -26,11 +26,11 @@
 #include <linux/regulator/fixed.h>
 #include <linux/leds.h>
 #include <linux/leds_pwm.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/usb/musb.h>
 #include <linux/usb/phy.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -724,9 +724,8 @@
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap_4430sdp_init,
 	.init_late	= omap4430_init_late,
-	.timer		= &omap4_timer,
+	.init_time	= omap4_local_timer_init,
 	.restart	= omap44xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 51b96a1..07f0be2 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -92,6 +92,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_crane_init,
 	.init_late	= am35xx_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f81a303..6f5b2a0 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -393,6 +393,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_evm_init,
 	.init_late	= am35xx_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 5d0a61f..3a6ca74 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -337,6 +337,6 @@
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_apollon_init,
 	.init_late	= omap2420_init_late,
-	.timer		= &omap2_timer,
+	.init_time	= omap2_sync32k_timer_init,
 	.restart	= omap2xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index f1172f2..231a7d8 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -753,7 +753,7 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t35_init,
 	.init_late	= omap35xx_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
@@ -766,6 +766,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t3730_init,
 	.init_late     = omap3630_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index ebbc2ad..6a9529a 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -297,6 +297,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t3517_init,
 	.init_late	= am35xx_init_late,
-	.timer		= &omap3_gp_timer,
+	.init_time	= omap3_gp_gptimer_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 77cade52..a37514e 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -645,6 +645,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= devkit8000_init,
 	.init_late	= omap35xx_init_late,
-	.timer		= &omap3_secure_timer,
+	.init_time	= omap3_secure_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 53cb380b..2590463 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -16,7 +16,6 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 
 #include "common.h"
@@ -65,7 +64,7 @@
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap2_timer,
+	.init_time	= omap2_sync32k_timer_init,
 	.dt_compat	= omap242x_boards_compat,
 	.restart	= omap2xxx_restart,
 MACHINE_END
@@ -84,7 +83,7 @@
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap2_timer,
+	.init_time	= omap2_sync32k_timer_init,
 	.dt_compat	= omap243x_boards_compat,
 	.restart	= omap2xxx_restart,
 MACHINE_END
@@ -103,7 +102,7 @@
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.dt_compat	= omap3_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
@@ -120,7 +119,7 @@
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap3_secure_timer,
+	.init_time	= omap3_secure_sync32k_timer_init,
 	.dt_compat	= omap3_gp_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
@@ -139,7 +138,7 @@
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap3_am33xx_timer,
+	.init_time	= omap3_am33xx_gptimer_timer_init,
 	.dt_compat	= am33xx_boards_compat,
 MACHINE_END
 #endif
@@ -156,10 +155,9 @@
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= omap_gic_of_init,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap4430_init_late,
-	.timer		= &omap4_timer,
+	.init_time	= omap4_local_timer_init,
 	.dt_compat	= omap4_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END
@@ -177,9 +175,8 @@
 	.map_io		= omap5_map_io,
 	.init_early	= omap5_init_early,
 	.init_irq	= omap_gic_of_init,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap5_timer,
+	.init_time	= omap5_realtime_timer_init,
 	.dt_compat	= omap5_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 3be1311..812c829 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -342,6 +342,6 @@
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_h4_init,
 	.init_late	= omap2420_init_late,
-	.timer		= &omap2_timer,
+	.init_time	= omap2_sync32k_timer_init,
 	.restart	= omap2xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 15e5881..3f97f30 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -657,7 +657,7 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
 	.init_late	= omap35xx_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
@@ -670,6 +670,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
 	.init_late	= omap35xx_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 3b5510a..b12fe96 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -437,6 +437,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_ldp_init,
 	.init_late	= omap3430_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 0abb30f..f6eeb87 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -731,7 +731,7 @@
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.init_late	= omap2420_init_late,
-	.timer		= &omap2_timer,
+	.init_time	= omap2_sync32k_timer_init,
 	.restart	= omap2xxx_restart,
 MACHINE_END
 
@@ -744,7 +744,7 @@
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.init_late	= omap2420_init_late,
-	.timer		= &omap2_timer,
+	.init_time	= omap2_sync32k_timer_init,
 	.restart	= omap2xxx_restart,
 MACHINE_END
 
@@ -757,6 +757,6 @@
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.init_late	= omap2420_init_late,
-	.timer		= &omap2_timer,
+	.init_time	= omap2_sync32k_timer_init,
 	.restart	= omap2xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 4616f92..d07058b 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -546,6 +546,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_beagle_init,
 	.init_late	= omap3_init_late,
-	.timer		= &omap3_secure_timer,
+	.init_time	= omap3_secure_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 2023895..f437636 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -759,6 +759,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_evm_init,
 	.init_late	= omap35xx_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 9409eb8..bab51e6 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -233,7 +233,7 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
 	.init_late	= omap35xx_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
@@ -246,6 +246,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
 	.init_late	= omap35xx_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1ac3e81..07cc088 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -620,6 +620,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3pandora_init,
 	.init_late	= omap35xx_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 63cb204..0490acb 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -429,6 +429,6 @@
 	.handle_irq		= omap3_intc_handle_irq,
 	.init_machine		= omap3_stalker_init,
 	.init_late		= omap35xx_init_late,
-	.timer			= &omap3_secure_timer,
+	.init_time		= omap3_secure_sync32k_timer_init,
 	.restart		= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 6b22ce3..91daf71 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -388,6 +388,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_touchbook_init,
 	.init_late	= omap3430_init_late,
-	.timer		= &omap3_secure_timer,
+	.init_time	= omap3_secure_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 40184cc..7b152d0 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -32,9 +32,9 @@
 #include <linux/usb/musb.h>
 #include <linux/usb/phy.h>
 #include <linux/wl12xx.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -461,9 +461,8 @@
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap4_panda_init,
 	.init_late	= omap4430_init_late,
-	.timer		= &omap4_timer,
+	.init_time	= omap4_local_timer_init,
 	.restart	= omap44xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 7e43ff3..6975a85 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -553,6 +553,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= overo_init,
 	.init_late	= omap35xx_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index f8a272c..345e8c4 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -149,7 +149,7 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rm680_init,
 	.init_late	= omap3630_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
@@ -162,6 +162,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rm680_init,
 	.init_late	= omap3630_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index d0374ea..f7c4616 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -123,6 +123,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rx51_init,
 	.init_late	= omap3430_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index 1a3e056..6273c28 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -43,7 +43,7 @@
 	.map_io		= ti81xx_map_io,
 	.init_early	= ti81xx_init_early,
 	.init_irq	= ti81xx_init_irq,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.init_machine	= ti81xx_evm_init,
 	.init_late	= ti81xx_init_late,
 	.restart	= omap44xx_restart,
@@ -55,7 +55,7 @@
 	.map_io		= ti81xx_map_io,
 	.init_early	= ti81xx_init_early,
 	.init_irq	= ti81xx_init_irq,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.init_machine	= ti81xx_evm_init,
 	.init_late	= ti81xx_init_late,
 	.restart	= omap44xx_restart,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index d7fa31e..d257cf1 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -137,7 +137,7 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_zoom_init,
 	.init_late	= omap3430_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
@@ -150,6 +150,6 @@
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_zoom_init,
 	.init_late	= omap3630_init_late,
-	.timer		= &omap3_timer,
+	.init_time	= omap3_sync32k_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 948bcaa..b435027 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -79,13 +79,13 @@
 
 extern void omap2_init_common_infrastructure(void);
 
-extern struct sys_timer omap2_timer;
-extern struct sys_timer omap3_timer;
-extern struct sys_timer omap3_secure_timer;
-extern struct sys_timer omap3_gp_timer;
-extern struct sys_timer omap3_am33xx_timer;
-extern struct sys_timer omap4_timer;
-extern struct sys_timer omap5_timer;
+extern void omap2_sync32k_timer_init(void);
+extern void omap3_sync32k_timer_init(void);
+extern void omap3_secure_sync32k_timer_init(void);
+extern void omap3_gp_gptimer_timer_init(void);
+extern void omap3_am33xx_gptimer_timer_init(void);
+extern void omap4_local_timer_init(void);
+extern void omap5_realtime_timer_init(void);
 
 void omap2420_init_early(void);
 void omap2430_init_early(void);
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
index 8e3546d..7b360ac 100644
--- a/arch/arm/mach-omap2/include/mach/uncompress.h
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -169,8 +169,3 @@
 		DEBUG_LL_AM33XX(1, am335xevm);
 	} while (0);
 }
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index cd42d92..3616779 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -19,9 +19,9 @@
 #include <linux/device.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 
 #include "omap-secure.h"
@@ -157,7 +157,7 @@
 		booted = true;
 	}
 
-	gic_raise_softirq(cpumask_of(cpu), 0);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
 	/*
 	 * Now the secondary core is starting up let it run its
@@ -231,8 +231,6 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 8633a43..f8bb3b9 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -24,8 +24,7 @@
 #include <linux/cpu.h>
 #include <linux/notifier.h>
 #include <linux/cpu_pm.h>
-
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include "omap-wakeupgen.h"
 #include "omap-secure.h"
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 6897ae2..5470948 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -15,13 +15,14 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/memblock.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/export.h>
+#include <linux/irqchip/arm-gic.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
 #include <asm/memblock.h>
@@ -255,16 +256,10 @@
 }
 early_initcall(omap4_sar_ram_init);
 
-static struct of_device_id irq_match[] __initdata = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{ .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
-	{ }
-};
-
 void __init omap_gic_of_init(void)
 {
 	omap_wakeupgen_init();
-	of_irq_init(irq_match);
+	irqchip_init();
 }
 
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 265de51..7172988 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -131,7 +131,6 @@
 static struct clock_event_device clockevent_gpt = {
 	.name		= "gp_timer",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 300,
 	.set_next_event	= omap2_gp_timer_set_next_event,
 	.set_mode	= omap2_gp_timer_set_mode,
@@ -336,17 +335,11 @@
 
 	__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
 
-	clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC,
-				     clockevent_gpt.shift);
-	clockevent_gpt.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &clockevent_gpt);
-	clockevent_gpt.min_delta_ns =
-		clockevent_delta2ns(3, &clockevent_gpt);
-		/* Timer internal resynch latency. */
-
 	clockevent_gpt.cpumask = cpu_possible_mask;
 	clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev);
-	clockevents_register_device(&clockevent_gpt);
+	clockevents_config_and_register(&clockevent_gpt, clkev.rate,
+					3, /* Timer internal resynch latency */
+					0xffffffff);
 
 	pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
 		gptimer_id, clkev.rate);
@@ -552,7 +545,7 @@
 
 #define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,	\
 			       clksrc_nr, clksrc_src)			\
-static void __init omap##name##_gptimer_timer_init(void)		\
+void __init omap##name##_gptimer_timer_init(void)			\
 {									\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
@@ -561,7 +554,7 @@
 
 #define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,	\
 				clksrc_nr, clksrc_src)			\
-static void __init omap##name##_sync32k_timer_init(void)		\
+void __init omap##name##_sync32k_timer_init(void)		\
 {									\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
@@ -572,33 +565,23 @@
 		omap2_sync32k_clocksource_init();			\
 }
 
-#define OMAP_SYS_TIMER(name, clksrc)					\
-struct sys_timer omap##name##_timer = {					\
-	.init	= omap##name##_##clksrc##_timer_init,			\
-};
-
 #ifdef CONFIG_ARCH_OMAP2
 OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon",
 			2, OMAP2_MPU_SOURCE);
-OMAP_SYS_TIMER(2, sync32k);
 #endif /* CONFIG_ARCH_OMAP2 */
 
 #ifdef CONFIG_ARCH_OMAP3
 OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon",
 			2, OMAP3_MPU_SOURCE);
-OMAP_SYS_TIMER(3, sync32k);
 OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure",
 			2, OMAP3_MPU_SOURCE);
-OMAP_SYS_TIMER(3_secure, sync32k);
 OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon",
 		       2, OMAP3_MPU_SOURCE);
-OMAP_SYS_TIMER(3_gp, gptimer);
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #ifdef CONFIG_SOC_AM33XX
 OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon",
 		       2, OMAP4_MPU_SOURCE);
-OMAP_SYS_TIMER(3_am33xx, gptimer);
 #endif /* CONFIG_SOC_AM33XX */
 
 #ifdef CONFIG_ARCH_OMAP4
@@ -606,7 +589,7 @@
 			2, OMAP4_MPU_SOURCE);
 #ifdef CONFIG_LOCAL_TIMERS
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
-static void __init omap4_local_timer_init(void)
+void __init omap4_local_timer_init(void)
 {
 	omap4_sync32k_timer_init();
 	/* Local timers are not supprted on OMAP4430 ES1.0 */
@@ -624,18 +607,17 @@
 	}
 }
 #else /* CONFIG_LOCAL_TIMERS */
-static void __init omap4_local_timer_init(void)
+void __init omap4_local_timer_init(void)
 {
 	omap4_sync32k_timer_init();
 }
 #endif /* CONFIG_LOCAL_TIMERS */
-OMAP_SYS_TIMER(4, local);
 #endif /* CONFIG_ARCH_OMAP4 */
 
 #ifdef CONFIG_SOC_OMAP5
 OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
 			2, OMAP4_MPU_SOURCE);
-static void __init omap5_realtime_timer_init(void)
+void __init omap5_realtime_timer_init(void)
 {
 	int err;
 
@@ -646,7 +628,6 @@
 	if (err)
 		pr_err("%s: arch_timer_register failed %d\n", __func__, err);
 }
-OMAP_SYS_TIMER(5, realtime);
 #endif /* CONFIG_SOC_OMAP5 */
 
 /**
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index 32e5c21..35a8014 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -72,7 +72,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion_dt_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.init_machine	= orion5x_dt_init,
 	.restart	= orion5x_restart,
 	.dt_compat	= orion5x_dt_compat,
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 550f923..d068f14 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -217,7 +217,7 @@
 	return 166666667;
 }
 
-static void __init orion5x_timer_init(void)
+void __init orion5x_timer_init(void)
 {
 	orion5x_tclk = orion5x_find_tclk();
 
@@ -225,10 +225,6 @@
 			IRQ_ORION5X_BRIDGE, orion5x_tclk);
 }
 
-struct sys_timer orion5x_timer = {
-	.init = orion5x_timer_init,
-};
-
 
 /*****************************************************************************
  * General
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 7db5cdd..e603457 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -15,7 +15,7 @@
 void orion5x_id(u32 *dev, u32 *rev, char **dev_name);
 void clk_init(void);
 extern int orion5x_tclk;
-extern struct sys_timer orion5x_timer;
+extern void orion5x_timer_init(void);
 
 /*
  * Enumerations and functions for Orion windows mapping. Used by Orion core
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index e3629c0..57d0af7 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -342,7 +342,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
@@ -355,7 +355,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 41fe2b1..7666564 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -362,6 +362,6 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index e533588..6eb1732 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -714,7 +714,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
index 4322dba..abd26b5 100644
--- a/arch/arm/mach-orion5x/include/mach/uncompress.h
+++ b/arch/arm/mach-orion5x/include/mach/uncompress.h
@@ -46,4 +46,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index f1ae10a..b984035 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -383,7 +383,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
@@ -397,7 +397,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 0c9e413..044da5b 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -322,7 +322,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index c1b5d8a..d49f934 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -269,7 +269,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 949eaa8..8e3965c 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -271,7 +271,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 1c16d04..0ec94a1 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -265,7 +265,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index c87fde4..18143f2 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -233,7 +233,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 3506f16..282e503 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -425,7 +425,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 9b1c953..d6e72f67 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -171,7 +171,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 51ba2b8..c8b7913 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -183,7 +183,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 0a56b94..f9e1567 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -281,6 +281,6 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index ed50910..78a1e6a 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -123,7 +123,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 90e571d..acc0877 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -361,7 +361,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index b184f68..9c17f0c 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -326,7 +326,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index a5c2e64..8cc5ab6 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -315,7 +315,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index b0727dc..e960855 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -619,6 +619,6 @@
 	.map_io		= ts78xx_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 754c12b..66552ca 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -176,7 +176,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 45c2125..2c5408e 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -264,7 +264,7 @@
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
+	.init_time	= orion5x_timer_init,
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
index 868796f..13bae78 100644
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -7,7 +7,6 @@
 	select DW_APB_TIMER
 	select DW_APB_TIMER_OF
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_TCM
 	select NO_IOPORT
 	select SPARSE_IRQ
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index f6c0849..70b441a 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -9,6 +9,7 @@
  */
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -17,7 +18,6 @@
 #include <linux/dw_apb_timer.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
@@ -70,16 +70,6 @@
 	NULL
 };
 
-static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,pl192-vic", .data = vic_of_init, },
-	{ /* Sentinel */ }
-};
-
-static void __init picoxcell_init_irq(void)
-{
-	of_irq_init(vic_of_match);
-}
-
 static void picoxcell_wdt_restart(char mode, const char *cmd)
 {
 	/*
@@ -97,9 +87,8 @@
 DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
 	.map_io		= picoxcell_map_io,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= picoxcell_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &dw_apb_timer,
+	.init_irq	= irqchip_init,
+	.init_time	= dw_apb_timer_init,
 	.init_machine	= picoxcell_init_machine,
 	.dt_compat	= picoxcell_dt_match,
 	.restart	= picoxcell_wdt_restart,
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
index a65cb02..481b42a 100644
--- a/arch/arm/mach-picoxcell/common.h
+++ b/arch/arm/mach-picoxcell/common.h
@@ -12,6 +12,6 @@
 
 #include <asm/mach/time.h>
 
-extern struct sys_timer dw_apb_timer;
+extern void dw_apb_timer_init(void);
 
 #endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index f25a541..ed3570e 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -40,7 +40,7 @@
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.map_io         = sirfsoc_map_lluart,
 	.init_irq	= sirfsoc_of_irq_init,
-	.timer		= &sirfsoc_timer,
+	.init_time	= sirfsoc_timer_init,
 	.dma_zone_size	= SZ_256M,
 	.init_machine	= sirfsoc_mach_init,
 	.init_late	= sirfsoc_init_late,
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 60d826f..9c75f12 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <asm/mach/time.h>
 
-extern struct sys_timer sirfsoc_timer;
+extern void sirfsoc_timer_init(void);
 
 extern void __init sirfsoc_of_irq_init(void);
 extern void __init sirfsoc_of_clk_init(void);
diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h
index 0c898fc..f72ca26 100644
--- a/arch/arm/mach-prima2/include/mach/uncompress.h
+++ b/arch/arm/mach-prima2/include/mach/uncompress.h
@@ -17,8 +17,6 @@
 {
 }
 
-#define arch_decomp_wdog()
-
 static __inline__ void putc(char c)
 {
 	/*
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
index d95bf25..a7a2c19 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer.c
@@ -175,19 +175,13 @@
 
 static void __init sirfsoc_clockevent_init(void)
 {
-	clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60);
-
-	sirfsoc_clockevent.max_delta_ns =
-		clockevent_delta2ns(-2, &sirfsoc_clockevent);
-	sirfsoc_clockevent.min_delta_ns =
-		clockevent_delta2ns(2, &sirfsoc_clockevent);
-
 	sirfsoc_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&sirfsoc_clockevent);
+	clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE,
+					2, -2);
 }
 
 /* initialize the kernel jiffy timer source */
-static void __init sirfsoc_timer_init(void)
+void __init sirfsoc_timer_init(void)
 {
 	unsigned long rate;
 	struct clk *clk;
@@ -226,7 +220,7 @@
 	{},
 };
 
-static void __init sirfsoc_of_timer_map(void)
+void __init sirfsoc_of_timer_map(void)
 {
 	struct device_node *np;
 	const unsigned int *intspec;
@@ -245,7 +239,3 @@
 
 	of_node_put(np);
 }
-
-struct sys_timer sirfsoc_timer = {
-	.init = sirfsoc_timer_init,
-};
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 2082293..2f71b3f 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -822,7 +822,7 @@
 	.nr_irqs	= BALLOON3_NR_IRQS,
 	.init_irq	= balloon3_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= balloon3_init,
 	.atag_offset	= 0x100,
 	.restart	= pxa_restart,
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 9a8760b..c092730 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -153,7 +153,7 @@
 	.nr_irqs = PXA_NR_IRQS,
 	.init_irq = pxa3xx_init_irq,
 	.handle_irq = pxa3xx_handle_irq,
-	.timer = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine = capc7117_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index a103c8f..bb99f59 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -520,7 +520,7 @@
 	.init_irq	= cmx2xx_init_irq,
 	/* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */
 	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= cmx2xx_init,
 #ifdef CONFIG_PCI
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index cc2b23a..8091aac 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -854,7 +854,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= cm_x300_init,
 	.fixup		= cm_x300_fixup,
 	.restart	= pxa_restart,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index b2f227d..5f9d930 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -313,7 +313,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 
@@ -324,7 +324,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index a9c9c16..f1a1ac1 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -189,7 +189,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 25515cd..f6cc8b0 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -259,7 +259,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 7c83f52..a5b8fead 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -733,7 +733,7 @@
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= corgi_restart,
 MACHINE_END
 #endif
@@ -746,7 +746,7 @@
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= corgi_restart,
 MACHINE_END
 #endif
@@ -759,7 +759,7 @@
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= corgi_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 7039f44..fadfff8 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -278,6 +278,6 @@
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
 	.init_machine   = csb726_init,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 1b64114..446563a 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1298,7 +1298,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= em_x270_init,
 	.restart	= pxa_restart,
 MACHINE_END
@@ -1309,7 +1309,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= em_x270_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index be2ee9b..8280ebc 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -195,7 +195,7 @@
 	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e330_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 #endif
@@ -246,7 +246,7 @@
 	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e350_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 #endif
@@ -370,7 +370,7 @@
 	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e400_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 #endif
@@ -566,7 +566,7 @@
 	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e740_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 #endif
@@ -765,7 +765,7 @@
 	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e750_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 #endif
@@ -977,7 +977,7 @@
 	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e800_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index dc58fa0..dca1070 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -802,7 +802,7 @@
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine   = a780_init,
 	.restart	= pxa_restart,
 MACHINE_END
@@ -869,7 +869,7 @@
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine   = e680_init,
 	.restart	= pxa_restart,
 MACHINE_END
@@ -936,7 +936,7 @@
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine   = a1200_init,
 	.restart	= pxa_restart,
 MACHINE_END
@@ -1128,7 +1128,7 @@
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine   = a910_init,
 	.restart	= pxa_restart,
 MACHINE_END
@@ -1195,7 +1195,7 @@
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine   = e6_init,
 	.restart	= pxa_restart,
 MACHINE_END
@@ -1236,7 +1236,7 @@
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine   = e2_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 42d5cca..fd7ea39 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -10,9 +10,8 @@
  */
 
 struct irq_data;
-struct sys_timer;
 
-extern struct sys_timer pxa_timer;
+extern void pxa_timer_init(void);
 
 extern void __init pxa_map_io(void);
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 60755a6..00b92da 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -238,7 +238,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= gumstix_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index e7dec58..875ec33 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -208,7 +208,7 @@
 	.nr_irqs = PXA_NR_IRQS,
 	.init_irq = pxa25x_init_irq,
 	.handle_irq = pxa25x_handle_irq,
-	.timer = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine = h5000_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 2962de8..7a8d749 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -164,6 +164,6 @@
 	.init_irq = pxa25x_init_irq,
 	.handle_irq = pxa25x_handle_irq,
 	.init_machine = himalaya_init,
-	.timer = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index e2c6391..133109e 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -900,6 +900,6 @@
 	.init_irq     = pxa27x_init_irq,
 	.handle_irq     = pxa27x_handle_irq,
 	.init_machine = hx4700_init,
-	.timer        = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 1d02eab..fe31bfc 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -196,7 +196,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= icontrol_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 64507cd..343c4e3 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -279,7 +279,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= idp_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 5519a34..8c27757 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -72,8 +72,3 @@
 		uart_is_pxa = 0;
 	}
 }
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 402874f..e848c46 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -443,7 +443,7 @@
 	.nr_irqs	= LITTLETON_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= littleton_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1a63eaa..1255ee0 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -503,7 +503,7 @@
 	.nr_irqs	= LPD270_NR_IRQS,
 	.init_irq	= lpd270_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= lpd270_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 553056d..d8a1be6 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -650,7 +650,7 @@
 	.nr_irqs	= LUBBOCK_NR_IRQS,
 	.init_irq	= lubbock_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= lubbock_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index f792240..f44532f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -774,6 +774,6 @@
 	.init_irq = pxa27x_init_irq,
 	.handle_irq = pxa27x_handle_irq,
 	.init_machine = magician_init,
-	.timer = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f27a61e..7a12c1b 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -714,7 +714,7 @@
 	.nr_irqs	= MAINSTONE_NR_IRQS,
 	.init_irq	= mainstone_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= mainstone_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2831308..f8979b94 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -762,6 +762,6 @@
 	.init_irq	= &pxa27x_init_irq,
 	.handle_irq	= &pxa27x_handle_irq,
 	.init_machine	= mioa701_machine_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= mioa701_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 152efbf..854f1f5 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -93,7 +93,7 @@
 /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
 MACHINE_START(NEC_MP900, "MobilePro900/C")
 	.atag_offset	= 0x220100,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 8bcc96e..909b713 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -347,7 +347,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= palmld_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 5ca7b90..5033fd0 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -208,7 +208,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= palmt5_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index ca924cf..100b176f 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -542,7 +542,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= palmtc_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 32e0d79..0742721 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -363,7 +363,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= palmte2_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 5775128..a29849d 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -501,7 +501,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine   = treo680_init,
 	.restart	= pxa_restart,
 MACHINE_END
@@ -515,7 +515,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= centro_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 8b43666..627c93a 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -366,7 +366,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= palmtx_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 8cdd4f5..18b7fcd 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -404,7 +404,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= palmz72_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index fe90544..69918c7 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -263,7 +263,7 @@
 	.nr_irqs	= PCM027_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= pcm027_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 2910bb9..50ccd5f 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -469,7 +469,7 @@
 	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= poodle_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index c9192ce..3835979 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -55,7 +55,7 @@
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_dt_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 	.init_machine	= pxa3xx_dt_init,
 	.dt_compat	= pxa3xx_dt_board_compat,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 25b08bfa..af41888 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1095,7 +1095,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 #endif
@@ -1108,7 +1108,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 #endif
@@ -1121,7 +1121,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 08d87a5..710c493 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -601,7 +601,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq       = pxa3xx_init_irq,
 	.handle_irq       = pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine   = saar_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 7e2cb88..362726c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -986,7 +986,7 @@
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= spitz_restart,
 MACHINE_END
 #endif
@@ -1000,7 +1000,7 @@
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= spitz_restart,
 MACHINE_END
 #endif
@@ -1014,7 +1014,7 @@
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= spitz_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 456560b..88fde43 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1006,7 +1006,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= imote2_init,
 	.atag_offset	= 0x100,
 	.restart	= pxa_restart,
@@ -1019,7 +1019,7 @@
 	.nr_irqs = STARGATE_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.handle_irq = pxa27x_handle_irq,
-	.timer = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine = stargate2_init,
 	.atag_offset = 0x100,
 	.restart	= pxa_restart,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 1a25f8a..f55979c 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -494,7 +494,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq       = pxa3xx_init_irq,
 	.handle_irq       = pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine   = tavorevb_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 4bc47d6..8f1ee92 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -89,48 +89,10 @@
 	}
 }
 
-static struct clock_event_device ckevt_pxa_osmr0 = {
-	.name		= "osmr0",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= pxa_osmr0_set_next_event,
-	.set_mode	= pxa_osmr0_set_mode,
-};
-
-static struct irqaction pxa_ost0_irq = {
-	.name		= "ost0",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= pxa_ost0_interrupt,
-	.dev_id		= &ckevt_pxa_osmr0,
-};
-
-static void __init pxa_timer_init(void)
-{
-	unsigned long clock_tick_rate = get_clock_tick_rate();
-
-	writel_relaxed(0, OIER);
-	writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
-
-	setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
-
-	clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
-	ckevt_pxa_osmr0.max_delta_ns =
-		clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
-	ckevt_pxa_osmr0.min_delta_ns =
-		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
-	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
-
-	setup_irq(IRQ_OST0, &pxa_ost0_irq);
-
-	clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32,
-		clocksource_mmio_readl_up);
-	clockevents_register_device(&ckevt_pxa_osmr0);
-}
-
 #ifdef CONFIG_PM
 static unsigned long osmr[4], oier, oscr;
 
-static void pxa_timer_suspend(void)
+static void pxa_timer_suspend(struct clock_event_device *cedev)
 {
 	osmr[0] = readl_relaxed(OSMR0);
 	osmr[1] = readl_relaxed(OSMR1);
@@ -140,7 +102,7 @@
 	oscr = readl_relaxed(OSCR);
 }
 
-static void pxa_timer_resume(void)
+static void pxa_timer_resume(struct clock_event_device *cedev)
 {
 	/*
 	 * Ensure that we have at least MIN_OSCR_DELTA between match
@@ -163,8 +125,38 @@
 #define pxa_timer_resume NULL
 #endif
 
-struct sys_timer pxa_timer = {
-	.init		= pxa_timer_init,
+static struct clock_event_device ckevt_pxa_osmr0 = {
+	.name		= "osmr0",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 200,
+	.set_next_event	= pxa_osmr0_set_next_event,
+	.set_mode	= pxa_osmr0_set_mode,
 	.suspend	= pxa_timer_suspend,
 	.resume		= pxa_timer_resume,
 };
+
+static struct irqaction pxa_ost0_irq = {
+	.name		= "ost0",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= pxa_ost0_interrupt,
+	.dev_id		= &ckevt_pxa_osmr0,
+};
+
+void __init pxa_timer_init(void)
+{
+	unsigned long clock_tick_rate = get_clock_tick_rate();
+
+	writel_relaxed(0, OIER);
+	writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
+
+	setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
+
+	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
+
+	setup_irq(IRQ_OST0, &pxa_ost0_irq);
+
+	clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32,
+		clocksource_mmio_readl_up);
+	clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate,
+		MIN_OSCR_DELTA * 2, 0x7fffffff);
+}
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 233629e..9e7998d 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -982,6 +982,6 @@
 	.init_irq       = pxa25x_init_irq,
 	.handle_irq       = pxa25x_handle_irq,
 	.init_machine   = tosa_init,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= tosa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index fbbcbed..c580434 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -561,7 +561,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 
@@ -573,6 +573,6 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index c773e4d..9c363c0 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -997,7 +997,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= viper_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
-	.timer          = &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= viper_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 491b6c9..aa89488 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -719,7 +719,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= vpac270_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 4275713..13b1d45 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -185,7 +185,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 97529fa..989903a 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -722,7 +722,7 @@
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= z2_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index abd3aa1..f5d4364 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -910,7 +910,7 @@
 	.nr_irqs	= ZEUS_NR_IRQS,
 	.init_irq	= zeus_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= zeus_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 226279f..1f00d65 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -428,7 +428,7 @@
 	.nr_irqs	= ZYLONITE_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
+	.init_time	= pxa_timer_init,
 	.init_machine	= zylonite_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 6824674..1d5ee5c 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -42,7 +42,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <asm/hardware/gic.h>
 
 #include <mach/platform.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 8305037..cfa30d2 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -75,4 +75,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 300f706..98e3052 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -14,7 +14,6 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/smp_scu.h>
 
@@ -59,8 +58,6 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 28511d4..5b1c8bf 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -27,13 +27,13 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/smp_twd.h>
 
@@ -418,10 +418,6 @@
 	realview_eb_twd_init();
 }
 
-static struct sys_timer realview_eb_timer = {
-	.init		= realview_eb_timer_init,
-};
-
 static void realview_eb_restart(char mode, const char *cmd)
 {
 	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -472,8 +468,7 @@
 	.map_io		= realview_eb_map_io,
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
-	.timer		= &realview_eb_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= realview_eb_timer_init,
 	.init_machine	= realview_eb_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 07d6672..d5e83a1 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -29,13 +29,13 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
@@ -329,10 +329,6 @@
 	realview_timer_init(IRQ_DC1176_TIMER0);
 }
 
-static struct sys_timer realview_pb1176_timer = {
-	.init		= realview_pb1176_timer_init,
-};
-
 static void realview_pb1176_restart(char mode, const char *cmd)
 {
 	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -384,8 +380,7 @@
 	.map_io		= realview_pb1176_map_io,
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
-	.timer		= &realview_pb1176_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= realview_pb1176_timer_init,
 	.init_machine	= realview_pb1176_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 7ed53d7..c3cfe21 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -27,13 +27,13 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/smp_twd.h>
 
@@ -316,10 +316,6 @@
 	realview_pb11mp_twd_init();
 }
 
-static struct sys_timer realview_pb11mp_timer = {
-	.init		= realview_pb11mp_timer_init,
-};
-
 static void realview_pb11mp_restart(char mode, const char *cmd)
 {
 	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -367,8 +363,7 @@
 	.map_io		= realview_pb11mp_map_io,
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
-	.timer		= &realview_pb11mp_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= realview_pb11mp_timer_init,
 	.init_machine	= realview_pb11mp_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 9992431..dde652a 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -27,12 +27,12 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -264,10 +264,6 @@
 	realview_timer_init(IRQ_PBA8_TIMER0_1);
 }
 
-static struct sys_timer realview_pba8_timer = {
-	.init		= realview_pba8_timer_init,
-};
-
 static void realview_pba8_restart(char mode, const char *cmd)
 {
 	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -308,8 +304,7 @@
 	.map_io		= realview_pba8_map_io,
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
-	.timer		= &realview_pba8_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= realview_pba8_timer_init,
 	.init_machine	= realview_pba8_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 4f486f0..54f0185 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -26,13 +26,13 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/smp_twd.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
@@ -324,10 +324,6 @@
 	realview_pbx_twd_init();
 }
 
-static struct sys_timer realview_pbx_timer = {
-	.init		= realview_pbx_timer_init,
-};
-
 static void realview_pbx_fixup(struct tag *tags, char **from,
 			       struct meminfo *meminfo)
 {
@@ -404,8 +400,7 @@
 	.map_io		= realview_pbx_map_io,
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
-	.timer		= &realview_pbx_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= realview_pbx_timer_init,
 	.init_machine	= realview_pbx_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index 9cd9bcd..0fd4b0b 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -189,8 +189,3 @@
 	if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
 }
 #endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index f3fa259c..a302cf5 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -211,7 +211,7 @@
 	soft_restart(0);
 }
 
-extern struct sys_timer ioc_timer;
+void ioc_timer_init(void);
 
 MACHINE_START(RISCPC, "Acorn-RiscPC")
 	/* Maintainer: Russell King */
@@ -220,6 +220,6 @@
 	.reserve_lp1	= 1,
 	.map_io		= rpc_map_io,
 	.init_irq	= rpc_init_irq,
-	.timer		= &ioc_timer,
+	.init_time	= ioc_timer_init,
 	.restart	= rpc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index 581fca9..9a6def1 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -24,7 +24,7 @@
 
 #include <asm/mach/time.h>
 
-unsigned long ioc_timer_gettimeoffset(void)
+static u32 ioc_timer_gettimeoffset(void)
 {
 	unsigned int count1, count2, status;
 	long offset;
@@ -56,7 +56,7 @@
 	}
 
 	offset = (LATCH - offset) * (tick_nsec / 1000);
-	return (offset + LATCH/2) / LATCH;
+	return ((offset + LATCH/2) / LATCH) * 1000;
 }
 
 void __init ioctime_init(void)
@@ -82,14 +82,9 @@
 /*
  * Set up timer interrupt.
  */
-static void __init ioc_timer_init(void)
+void __init ioc_timer_init(void)
 {
+	arch_gettimeoffset = ioc_timer_gettimeoffset;
 	ioctime_init();
 	setup_irq(IRQ_TIMER0, &ioc_timer_irq);
 }
-
-struct sys_timer ioc_timer = {
-	.init		= ioc_timer_init,
-	.offset		= ioc_timer_gettimeoffset,
-};
-
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
deleted file mode 100644
index 68d89cb..0000000
--- a/arch/arm/mach-s3c2410/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# cpu frequency scaling support
-
-config S3C2410_CPUFREQ
-	bool
-	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
-	select S3C2410_CPUFREQ_UTILS
-	help
-	  CPU Frequency scaling support for S3C2410
-
-config S3C2410_PLLTABLE
-	bool
-	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
-	default y
-	help
-	  Select the PLL table for the S3C2410
-
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
deleted file mode 100644
index 6b9a316..0000000
--- a/arch/arm/mach-s3c2410/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# arch/arm/mach-s3c2410/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
-obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
-
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
deleted file mode 100644
index 495f692..0000000
--- a/arch/arm/mach-s3c2412/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Note, the S3C2412 IOtiming support is in plat-s3c24xx
-
-config S3C2412_CPUFREQ
-	bool
-	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
-	default y
-	select S3C2412_IOTIMING
-	help
-	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
deleted file mode 100644
index 41a6c27..0000000
--- a/arch/arm/mach-s3c2412/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# arch/arm/mach-s3c2412/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
deleted file mode 100644
index 4526f6b..0000000
--- a/arch/arm/mach-s3c2412/gpio.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-	unsigned long flags;
-	unsigned long slpcon;
-
-	offs *= 2;
-
-	if (pin < S3C2410_GPB(0))
-		return -EINVAL;
-
-	if (pin >= S3C2410_GPF(0) &&
-	    pin <= S3C2410_GPG(16))
-		return -EINVAL;
-
-	if (pin > S3C2410_GPH(16))
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	slpcon = __raw_readl(chip->base + 0x0C);
-
-	slpcon &= ~(3 << offs);
-	slpcon |= state << offs;
-
-	__raw_writel(slpcon, chip->base + 0x0C);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
deleted file mode 100644
index a4d7fd2..0000000
--- a/arch/arm/mach-s3c2440/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config S3C2440_CPUFREQ
-	bool "S3C2440/S3C2442 CPU Frequency scaling support"
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	default y
-	select S3C2410_CPUFREQ_UTILS
-	help
-	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
-config S3C2440_XTAL_12000000
-	bool
-	help
-	  Indicate that the build needs to support 12MHz system
-	  crystal.
-
-config S3C2440_XTAL_16934400
-	bool
-	help
-	  Indicate that the build needs to support 16.9344MHz system
-	  crystal.
-
-config S3C2440_PLL_12000000
-	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-	default y if CPU_FREQ_S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
-	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-	default y if CPU_FREQ_S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
deleted file mode 100644
index c460924..0000000
--- a/arch/arm/mach-s3c2440/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-# arch/arm/mach-s3c2440/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_CPU_S3C2440)	+= dsc.o
-
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
-
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
deleted file mode 100644
index 9ea66e3..0000000
--- a/arch/arm/mach-s3c2440/dsc.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/dsc.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Drive Strength Control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-
-int s3c2440_set_dsc(unsigned int pin, unsigned int value)
-{
-	void __iomem *base;
-	unsigned long val;
-	unsigned long flags;
-	unsigned long mask;
-
-	base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0;
-	mask = 3 << S3C2440_DSC_GETSHIFT(pin);
-
-	local_irq_save(flags);
-
-	val = __raw_readl(base);
-	val &= ~mask;
-	val |= value & mask;
-	__raw_writel(val, base);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2440_set_dsc);
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 7079a70..37f513d 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -9,6 +9,15 @@
 
 if ARCH_S3C24XX
 
+config PLAT_S3C24XX
+	def_bool y
+	select ARCH_REQUIRE_GPIOLIB
+	select NO_IOPORT
+	select S3C_DEV_NAND
+	select IRQ_DOMAIN
+	help
+	  Base platform code for any Samsung S3C24XX device
+
 menu "SAMSUNG S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -83,6 +92,17 @@
 
 # common code
 
+config S3C2410_CLOCK
+	bool
+	help
+	  Clock code for the S3C2410, and similar processors which
+	  is currently includes the S3C2410, S3C2440, S3C2442.
+
+config S3C24XX_DCLK
+	bool
+	help
+	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
+
 config S3C24XX_SMDK
 	bool
 	help
@@ -111,6 +131,22 @@
 	help
 	  Compile in platform device definition for Samsung TouchScreen.
 
+config S3C24XX_DMA
+	bool "S3C2410 DMA support"
+	depends on ARCH_S3C24XX
+	select S3C_DMA
+	help
+	  S3C2410 DMA support. This is needed for drivers like sound which
+	  use the S3C2410's DMA system to move data to and from the
+	  peripheral blocks.
+
+config S3C2410_DMA_DEBUG
+	bool "S3C2410 DMA support debug"
+	depends on ARCH_S3C24XX && S3C2410_DMA
+	help
+	  Enable debugging output for the DMA code. This option sends info
+	  to the kernel log, at priority KERN_DEBUG.
+
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -123,10 +159,92 @@
 	help
 	  Power Management code common to S3C2410 and better
 
+# low-level serial option nodes
+
+config CPU_LLSERIAL_S3C2410_ONLY
+	bool
+	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
+
+config CPU_LLSERIAL_S3C2440_ONLY
+	bool
+	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
+
+config CPU_LLSERIAL_S3C2410
+	bool
+	help
+	  Selected if there is an S3C2410 (or register compatible) serial
+	  low-level implementation needed
+
+config CPU_LLSERIAL_S3C2440
+	bool
+	help
+	  Selected if there is an S3C2440 (or register compatible) serial
+	  low-level implementation needed
+
+# gpio configurations
+
+config S3C24XX_GPIO_EXTRA
+	int
+	default 128 if S3C24XX_GPIO_EXTRA128
+	default 64 if S3C24XX_GPIO_EXTRA64
+	default 16 if ARCH_H1940
+	default 0
+
+config S3C24XX_GPIO_EXTRA64
+	bool
+	help
+	  Add an extra 64 gpio numbers to the available GPIO pool. This is
+	  available for boards that need extra gpios for external devices.
+
+config S3C24XX_GPIO_EXTRA128
+	bool
+	help
+	  Add an extra 128 gpio numbers to the available GPIO pool. This is
+	  available for boards that need extra gpios for external devices.
+
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select io timing code that is common to the s3c2410
+	  and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select timing code that is common to the s3c2410
+	  and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+	help
+	  Intel node to select io timing code that is common to the s3c2412
+	  and the s3c2443.
+
 # cpu-specific sections
 
 if CPU_S3C2410
 
+config S3C2410_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLL
+	bool
+	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help
@@ -267,6 +385,14 @@
 		   !CPU_S3C2443 && CPU_S3C2412
 	default y
 
+config S3C2412_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	default y
+	select S3C2412_IOTIMING
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
 config S3C2412_DMA
 	bool
 	help
@@ -367,11 +493,45 @@
 
 if CPU_S3C2440
 
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	default y
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config S3C2440_DMA
 	bool
 	help
 	  Support for S3C2440 specific DMA code5A
 
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 comment "S3C2440 Boards"
 
 #
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 0ab6ab1..af53d27 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -14,26 +14,32 @@
 
 # core
 
-obj-y				+= common.o
+obj-y				+= common.o irq.o
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpufreq-s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpufreq-s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o irq-s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock-s3c2416.o
 obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o irq-s3c2440.o clock-s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= cpufreq-s3c2440.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
 
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o irq-s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o clock-s3c2443.o
 
 # PM
 
@@ -41,9 +47,21 @@
 
 # common code
 
+obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
+obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
+
+obj-$(CONFIG_S3C2410_CLOCK)	+= clock-s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
+
+obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
+obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
+
 obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
+obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpufreq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
+
 #
 # machine support
 # following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/anubis.h b/arch/arm/mach-s3c24xx/anubis.h
new file mode 100644
index 0000000..2691665
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/anubis.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ * ANUBIS - IRQ Number definitions
+ * ANUBIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_ANUBIS_H
+#define __MACH_S3C24XX_ANUBIS_H __FILE__
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL		(0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK		(0x7)
+
+/* irq */
+
+#define ANUBIS_IRQ_IDE0			IRQ_EINT2
+#define ANUBIS_IRQ_IDE1			IRQ_EINT3
+#define ANUBIS_IRQ_ASIX			IRQ_EINT1
+
+/* map */
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x)		(S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD			(S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1			ANUBIS_IOADDR(0x00000000)
+#define ANUBIS_PA_CTRL1			ANUBIS_PA_CPLD
+
+#define ANUBIS_VA_IDREG			ANUBIS_IOADDR(0x00300000)
+#define ANUBIS_PA_IDREG			(ANUBIS_PA_CPLD + (3 << 23))
+
+#define ANUBIS_IDEPRI			ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX		ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC			ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX		ANUBIS_IOADDR(0x01300000)
+
+#endif /* __MACH_S3C24XX_ANUBIS_H */
diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c
index ba02cf8..3f0288f 100644
--- a/arch/arm/mach-s3c24xx/bast-ide.c
+++ b/arch/arm/mach-s3c24xx/bast-ide.c
@@ -25,8 +25,8 @@
 #include <asm/mach/irq.h>
 
 #include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
+
+#include "bast.h"
 
 /* IDE ports */
 
@@ -34,12 +34,10 @@
 	.ioport_shift	= 5,
 };
 
-#define IDE_CS	S3C2410_CS5
-
 static struct resource bast_ide0_resource[] = {
-	[0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
-	[1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
-	[2] = DEFINE_RES_IRQ(IRQ_IDE0),
+	[0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
+	[1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
+	[2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0),
 };
 
 static struct platform_device bast_device_ide0 = {
@@ -55,9 +53,9 @@
 };
 
 static struct resource bast_ide1_resource[] = {
-	[0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
-	[1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
-	[2] = DEFINE_RES_IRQ(IRQ_IDE1),
+	[0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
+	[1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
+	[2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1),
 };
 
 static struct platform_device bast_device_ide1 = {
diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c
index ac7b2ad..c0daa95 100644
--- a/arch/arm/mach-s3c24xx/bast-irq.c
+++ b/arch/arm/mach-s3c24xx/bast-irq.c
@@ -27,27 +27,20 @@
 #include <linux/device.h>
 #include <linux/io.h>
 
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
 #include <asm/irq.h>
-
+#include <asm/mach-types.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/regs-irq.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
 
 #include <plat/irq.h>
 
-#if 0
-#include <asm/debug-ll.h>
-#endif
+#include "bast.h"
 
 #define irqdbf(x...)
 #define irqdbf2(x...)
 
-
 /* handle PC104 ISA interrupts from the system CPLD */
 
 /* table of ISA irq nos to the relevant mask... zero means
@@ -87,7 +80,7 @@
 static void
 bast_pc104_maskack(struct irq_data *data)
 {
-	struct irq_desc *desc = irq_desc + IRQ_ISA;
+	struct irq_desc *desc = irq_desc + BAST_IRQ_ISA;
 
 	bast_pc104_mask(data);
 	desc->irq_data.chip->irq_ack(&desc->irq_data);
@@ -122,7 +115,7 @@
 	if (unlikely(stat == 0)) {
 		/* ack if we get an irq with nothing (ie, startup) */
 
-		desc = irq_desc + IRQ_ISA;
+		desc = irq_desc + BAST_IRQ_ISA;
 		desc->irq_data.chip->irq_ack(&desc->irq_data);
 	} else {
 		/* handle the IRQ */
@@ -147,7 +140,7 @@
 
 		__raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
 
-		irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux);
+		irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux);
 
 		/* register our IRQs */
 
diff --git a/arch/arm/mach-s3c24xx/bast.h b/arch/arm/mach-s3c24xx/bast.h
new file mode 100644
index 0000000..5c7534b
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/bast.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ * BAST - IRQ Number definitions
+ * BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_BAST_H
+#define __MACH_S3C24XX_BAST_H __FILE__
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF		(0x00)
+#define BAST_CPLD_CTRL1_LRCADC		(0x01)
+#define BAST_CPLD_CTRL1_LRCDAC		(0x02)
+#define BAST_CPLD_CTRL1_LRCARM		(0x03)
+#define BAST_CPLD_CTRL1_LRMASK		(0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND		(0x04)
+#define BAST_CPLD_CTLR2_IDERST		(0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK		(0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN		(0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT		(0x01)
+#define BAST_CPLD_CTRL4_LCDRW		(0x02)
+#define BAST_CPLD_CTRL4_LCDCMD		(0x04)
+#define BAST_CPLD_CTRL4_LCDE2		(0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE		(0)
+#define BAST_CPLD_DMA0_SECIDE		(1)
+#define BAST_CPLD_DMA0_ISA15		(2)
+#define BAST_CPLD_DMA0_ISA36		(3)
+
+#define BAST_CPLD_DMA1_PRIIDE		(0 << 2)
+#define BAST_CPLD_DMA1_SECIDE		(1 << 2)
+#define BAST_CPLD_DMA1_ISA15		(2 << 2)
+#define BAST_CPLD_DMA1_ISA36		(3 << 2)
+
+/* irq numbers to onboard peripherals */
+
+#define BAST_IRQ_USBOC			IRQ_EINT18
+#define BAST_IRQ_IDE0			IRQ_EINT16
+#define BAST_IRQ_IDE1			IRQ_EINT17
+#define BAST_IRQ_PCSERIAL1		IRQ_EINT15
+#define BAST_IRQ_PCSERIAL2		IRQ_EINT14
+#define BAST_IRQ_PCPARALLEL		IRQ_EINT13
+#define BAST_IRQ_ASIX			IRQ_EINT11
+#define BAST_IRQ_DM9000			IRQ_EINT10
+#define BAST_IRQ_ISA			IRQ_EINT9
+#define BAST_IRQ_SMALERT		IRQ_EINT8
+
+/* map */
+
+/*
+ * ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#define BAST_IOADDR(x)			(S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1			BAST_IOADDR(0x00000000)
+#define BAST_PA_CTRL1			(S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2			BAST_IOADDR(0x00100000)
+#define BAST_PA_CTRL2			(S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3			BAST_IOADDR(0x00200000)
+#define BAST_PA_CTRL3			(S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4			BAST_IOADDR(0x00300000)
+#define BAST_PA_CTRL4			(S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ		(S3C2410_CS5 | 0x6000000)
+#define BAST_VA_PC104_IRQREQ		BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW		(S3C2410_CS5 | 0x6800000)
+#define BAST_VA_PC104_IRQRAW		BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK		(S3C2410_CS5 | 0x7000000)
+#define BAST_VA_PC104_IRQMASK		BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1		(0x8800000)
+#define BAST_VA_LCD_RCMD1		BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1		(0x8000000)
+#define BAST_VA_LCD_WCMD1		BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1		(0x9800000)
+#define BAST_VA_LCD_RDATA1		BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1		(0x9000000)
+#define BAST_VA_LCD_WDATA1		BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2		(0xA800000)
+#define BAST_VA_LCD_RCMD2		BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2		(0xA000000)
+#define BAST_VA_LCD_WCMD2		BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2		(0xB800000)
+#define BAST_VA_LCD_RDATA2		BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2		(0xB000000)
+#define BAST_VA_LCD_WDATA2		BAST_IOADDR(0x00E00000)
+
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE		(0xE0000000)
+
+#define BAST_VA_ISAIO			(BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM			(BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI			(BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX		(BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC			(BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX		(BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET			(BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000			(BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO			(BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VAM_CS2			(0x00000000)
+#define BAST_VAM_CS3			(0x04000000)
+#define BAST_VAM_CS4			(0x08000000)
+#define BAST_VAM_CS5			(0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO			(0x00000000)
+#define BAST_PA_ASIXNET			(0x01000000)
+#define BAST_PA_SUPERIO			(0x01800000)
+#define BAST_PA_IDEPRI			(0x02000000)
+#define BAST_PA_IDEPRIAUX		(0x02800000)
+#define BAST_PA_IDESEC			(0x03000000)
+#define BAST_PA_IDESECAUX		(0x03800000)
+#define BAST_PA_ISAMEM			(0x04000000)
+#define BAST_PA_DM9000			(0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO			(BAST_VA_SUPERIO + BAST_VAM_CS2)
+
+#define BAST_ASIXNET_CS			BAST_VAM_CS5
+#define BAST_DM9000_CS			BAST_VAM_CS4
+
+#define BAST_IDE_CS	S3C2410_CS5
+
+#endif /* __MACH_S3C24XX_BAST_H */
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/clock-dclk.c
rename to arch/arm/mach-s3c24xx/clock-dclk.c
index f95d326..1edd9b2 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/mach-s3c24xx/clock-dclk.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/clock-dclk.c
- *
+/*
  * Copyright (c) 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c2410-clock.c
rename to arch/arm/mach-s3c24xx/clock-s3c2410.c
index 25dc4d4..641266f3 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-clock.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/clock.c
- *
+/*
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index c2f596e..ed6276f 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -15,4 +15,6 @@
 void s3c2410_restart(char mode, const char *cmd);
 void s3c244x_restart(char mode, const char *cmd);
 
+extern struct syscore_ops s3c24xx_irq_syscore_ops;
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
rename to arch/arm/mach-s3c24xx/cpufreq-debugfs.c
index c7adad0..9b7b428 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
- *
+/*
  * Copyright (c) 2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
similarity index 97%
rename from arch/arm/mach-s3c2410/cpu-freq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
index 5404535..cfa0dd8 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/cpu-freq.c
- *
+/*
  * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -81,7 +80,7 @@
 	cfg->divs.p_divisor = pdiv;
 	cfg->divs.h_divisor = hdiv;
 
-	return 0      ;
+	return 0;
 }
 
 static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
@@ -131,7 +130,6 @@
 {
 	return subsys_interface_register(&s3c2410_cpufreq_interface);
 }
-
 arch_initcall(s3c2410_cpufreq_init);
 
 static int s3c2410a_cpufreq_add(struct device *dev,
@@ -159,5 +157,4 @@
 {
 	return subsys_interface_register(&s3c2410a_cpufreq_interface);
 }
-
 arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
similarity index 97%
rename from arch/arm/mach-s3c2412/cpu-freq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
index 125be7d..8bf0f3a 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/cpu-freq.c
- *
+/*
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -26,12 +25,13 @@
 #include <asm/mach/map.h>
 
 #include <mach/regs-clock.h>
-#include <mach/regs-s3c2412-mem.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/cpu-freq-core.h>
 
+#include "s3c2412.h"
+
 /* our clock resources. */
 static struct clk *xtal;
 static struct clk *fclk;
@@ -111,7 +111,7 @@
 
 	return 0;
 
- invalid:
+invalid:
 	return -EINVAL;
 }
 
@@ -255,5 +255,4 @@
 {
 	return subsys_interface_register(&s3c2412_cpufreq_interface);
 }
-
 arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
similarity index 98%
rename from arch/arm/mach-s3c2440/s3c2440-cpufreq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
index 6177676..72b2cc8 100644
--- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
- *
+/*
  * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -310,5 +309,4 @@
 {
 	return subsys_interface_register(&s3c2442_cpufreq_interface);
 }
-
 subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c
similarity index 94%
rename from arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
rename to arch/arm/mach-s3c24xx/cpufreq-utils.c
index 43ea801..ddd8280 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
- *
+/*
  * Copyright (c) 2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -17,11 +16,12 @@
 #include <linux/io.h>
 
 #include <mach/map.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu-freq-core.h>
 
+#include "regs-mem.h"
+
 /**
  * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
  * @cfg: The frequency configuration
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq.c
similarity index 99%
rename from arch/arm/plat-s3c24xx/cpu-freq.c
rename to arch/arm/mach-s3c24xx/cpufreq.c
index 4680799..5f181e7 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
- *
+/*
  * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
index 4803338..25d085a 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
index 38472ac..d2408ba 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
index 5f0a0c8..0b86e74 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index 2d94228..0553625 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c
similarity index 99%
rename from arch/arm/plat-s3c24xx/dma.c
rename to arch/arm/mach-s3c24xx/dma.c
index ba3e76c..aab6490 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/mach-s3c24xx/dma.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/dma.c
- *
+/*
  * Copyright 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c24xx/gta02.h b/arch/arm/mach-s3c24xx/gta02.h
new file mode 100644
index 0000000..9430a71
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/gta02.h
@@ -0,0 +1,23 @@
+/*
+ * GTA02 header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_GTA02_H
+#define __MACH_S3C24XX_GTA02_H __FILE__
+
+#include <mach/regs-gpio.h>
+
+#define GTA02_GPIO_AUX_LED	S3C2410_GPB(2)
+#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB(9)
+#define GTA02_GPIO_AUX_KEY	S3C2410_GPF(6)
+#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF(7)
+#define GTA02_GPIO_AMP_SHUT	S3C2410_GPJ(1)	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_HP_IN	S3C2410_GPJ(2)	/* v2 + v3 + v4 only */
+
+#define GTA02_IRQ_PCF50633	IRQ_EINT9
+
+#endif /* __MACH_S3C24XX_GTA02_H */
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
index 3f40c61..5b98bfd 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
@@ -19,10 +19,10 @@
 #include <linux/gpio.h>
 #include <linux/rfkill.h>
 
-#include <mach/regs-gpio.h>
 #include <mach/hardware.h>
-#include <mach/h1940-latch.h>
-#include <mach/h1940.h>
+#include <mach/regs-gpio.h>
+
+#include "h1940.h"
 
 #define DRV_NAME "h1940-bt"
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h b/arch/arm/mach-s3c24xx/h1940.h
similarity index 69%
rename from arch/arm/mach-s3c24xx/include/mach/h1940-latch.h
rename to arch/arm/mach-s3c24xx/h1940.h
index fc897d3..2950cc4 100644
--- a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c24xx/h1940.h
@@ -1,20 +1,30 @@
-/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+/*
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- *  iPAQ H1940 series - latch definitions
+ * iPAQ H1940 series definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_H1940_LATCH_H
-#define __ASM_ARCH_H1940_LATCH_H
+#ifndef __MACH_S3C24XX_H1940_H
+#define __MACH_S3C24XX_H1940_H __FILE__
 
-#include <asm/gpio.h>
+#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT		(0x30081000)
+#define H1940_SUSPEND_CHECK		(0x30080000)
+
+extern void h1940_pm_return(void);
+extern int h1940_led_blink_set(unsigned gpio, int state,
+			       unsigned long *delay_on,
+			       unsigned long *delay_off);
+
+#include <linux/gpio.h>
 
 #define H1940_LATCH_GPIO(x)		(S3C_GPIO_END + (x))
 
@@ -40,4 +50,4 @@
 #define H1940_LATCH_LED_GREEN		H1940_LATCH_GPIO(14)
 #define H1940_LATCH_LED_FLASH		H1940_LATCH_GPIO(15)
 
-#endif /* __ASM_ARCH_H1940_LATCH_H */
+#endif /* __MACH_S3C24XX_H1940_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
deleted file mode 100644
index 1b614d5..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISCPLD_H
-#define __ASM_ARCH_ANUBISCPLD_H
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL		(0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK		(0x7)
-
-#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
deleted file mode 100644
index a2a3281..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  ANUBIS - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISIRQ_H
-#define __ASM_ARCH_ANUBISIRQ_H
-
-#define IRQ_IDE0       IRQ_EINT2
-#define IRQ_IDE1       IRQ_EINT3
-#define IRQ_ASIX       IRQ_EINT1
-
-#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
deleted file mode 100644
index c9deb3a..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_ANUBISMAP_H
-#define __ASM_ARCH_ANUBISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1	    ANUBIS_IOADDR(0x00000000)	 /* 0x01800000 */
-#define ANUBIS_PA_CTRL1	    (ANUBIS_PA_CPLD)
-
-#define ANUBIS_VA_IDREG	    ANUBIS_IOADDR(0x00300000)	 /* 0x01B00000 */
-#define ANUBIS_PA_IDREG	    (ANUBIS_PA_CPLD + (3<<23))
-
-#define ANUBIS_IDEPRI	    ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX    ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC	    ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX    ANUBIS_IOADDR(0x01300000)
-
-#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
deleted file mode 100644
index bee2a7a..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTCPLD_H
-#define __ASM_ARCH_BASTCPLD_H
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF	    (0x00)
-#define BAST_CPLD_CTRL1_LRCADC	    (0x01)
-#define BAST_CPLD_CTRL1_LRCDAC	    (0x02)
-#define BAST_CPLD_CTRL1_LRCARM	    (0x03)
-#define BAST_CPLD_CTRL1_LRMASK	    (0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND       (0x04)
-#define BAST_CPLD_CTLR2_IDERST      (0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK      (0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN      (0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT	    (0x01)
-#define BAST_CPLD_CTRL4_LCDRW	    (0x02)
-#define BAST_CPLD_CTRL4_LCDCMD	    (0x04)
-#define BAST_CPLD_CTRL4_LCDE2	    (0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE      (0<<0)
-#define BAST_CPLD_DMA0_SECIDE      (1<<0)
-#define BAST_CPLD_DMA0_ISA15       (2<<0)
-#define BAST_CPLD_DMA0_ISA36       (3<<0)
-
-#define BAST_CPLD_DMA1_PRIIDE      (0<<2)
-#define BAST_CPLD_DMA1_SECIDE      (1<<2)
-#define BAST_CPLD_DMA1_ISA15       (2<<2)
-#define BAST_CPLD_DMA1_ISA36       (3<<2)
-
-#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
deleted file mode 100644
index cac428c..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTIRQ_H
-#define __ASM_ARCH_BASTIRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC      IRQ_EINT18
-#define IRQ_IDE0       IRQ_EINT16
-#define IRQ_IDE1       IRQ_EINT17
-#define IRQ_PCSERIAL1  IRQ_EINT15
-#define IRQ_PCSERIAL2  IRQ_EINT14
-#define IRQ_PCPARALLEL IRQ_EINT13
-#define IRQ_ASIX       IRQ_EINT11
-#define IRQ_DM9000     IRQ_EINT10
-#define IRQ_ISA	       IRQ_EINT9
-#define IRQ_SMALERT    IRQ_EINT8
-
-#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h
deleted file mode 100644
index eecea2a..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-map.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-map.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_BASTMAP_H
-#define __ASM_ARCH_BASTMAP_H
-
-#define BAST_IOADDR(x)	   (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1	    BAST_IOADDR(0x00000000)	 /* 0x01300000 */
-#define BAST_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2	    BAST_IOADDR(0x00100000)	 /* 0x01400000 */
-#define BAST_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3	    BAST_IOADDR(0x00200000)	 /* 0x01500000 */
-#define BAST_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4	    BAST_IOADDR(0x00300000)	 /* 0x01600000 */
-#define BAST_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define BAST_VA_PC104_IRQREQ  BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define BAST_VA_PC104_IRQRAW  BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1     (0x8800000)
-#define BAST_VA_LCD_RCMD1     BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1     (0x8000000)
-#define BAST_VA_LCD_WCMD1     BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1    (0x9800000)
-#define BAST_VA_LCD_RDATA1    BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1    (0x9000000)
-#define BAST_VA_LCD_WDATA1    BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2     (0xA800000)
-#define BAST_VA_LCD_RCMD2     BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2     (0xA000000)
-#define BAST_VA_LCD_WCMD2     BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2    (0xB800000)
-#define BAST_VA_LCD_RDATA2    BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2    (0xB000000)
-#define BAST_VA_LCD_WDATA2    BAST_IOADDR(0x00E00000)
-
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VA_ISAIO	   (BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM	   (BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI	   (BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX  (BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC	   (BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX  (BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET	   (BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000	   (BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO	   (BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VAM_CS2 (0x00000000)
-#define BAST_VAM_CS3 (0x04000000)
-#define BAST_VAM_CS4 (0x08000000)
-#define BAST_VAM_CS5 (0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO	  (0x00000000)
-#define BAST_PA_ASIXNET	  (0x01000000)
-#define BAST_PA_SUPERIO	  (0x01800000)
-#define BAST_PA_IDEPRI	  (0x02000000)
-#define BAST_PA_IDEPRIAUX (0x02800000)
-#define BAST_PA_IDESEC	  (0x03000000)
-#define BAST_PA_IDESECAUX (0x03800000)
-#define BAST_PA_ISAMEM	  (0x04000000)
-#define BAST_PA_DM9000	  (0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
-/*  */
-
-#define BAST_ASIXNET_CS  BAST_VAM_CS5
-#define BAST_IDE_CS	 BAST_VAM_CS5
-#define BAST_DM9000_CS	 BAST_VAM_CS4
-
-#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
deleted file mode 100644
index c53ad34..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <plat/gpio-fns.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
deleted file mode 100644
index 3890a05..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO bank numbering
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIONRS_H
-#define __MACH_GPIONRS_H
-
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKG   (32*6)
-#define S3C2410_GPIO_BANKH   (32*7)
-
-/* GPIO sizes for various SoCs:
- *
- *             2442
- *   2410 2412 2440 2443 2416
- *   ---- ---- ---- ---- ----
- * A 23   22   25   16   25
- * B 11   11   11   11   9
- * C 16   15   16   16   16
- * D 16   16   16   16   16
- * E 16   16   16   16   16
- * F 8    8    8    8    8
- * G 16   16   16   16   8
- * H 11   11   9    15   15
- * J --   --   13   16   --
- * K --   --   --   --   16
- * L --   --   --   15   7
- * M --   --   --   2    2
- */
-
-/* GPIO bank sizes */
-#define S3C2410_GPIO_A_NR	(32)
-#define S3C2410_GPIO_B_NR	(32)
-#define S3C2410_GPIO_C_NR	(32)
-#define S3C2410_GPIO_D_NR	(32)
-#define S3C2410_GPIO_E_NR	(32)
-#define S3C2410_GPIO_F_NR	(32)
-#define S3C2410_GPIO_G_NR	(32)
-#define S3C2410_GPIO_H_NR	(32)
-#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
-#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
-#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
-#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
-
-#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
-#endif
-
-#define S3C2410_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
-
-#ifndef __ASSEMBLY__
-
-enum s3c_gpio_number {
-	S3C2410_GPIO_A_START = 0,
-	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
-	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
-	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
-	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
-	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
-	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
-	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
-	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
-	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
-	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
-	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
-};
-
-#endif /* __ASSEMBLY__ */
-
-/* S3C2410 GPIO number definitions. */
-
-#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
-#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
-#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
-#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
-#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
-#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
-#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
-#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
-#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
-#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
-#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
-#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
-
-#endif /* __MACH_GPIONRS_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
deleted file mode 100644
index c410a07..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C2410 - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-#include <mach/regs-gpio.h>
-
-extern struct samsung_gpio_chip s3c24xx_gpios[];
-
-static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip;
-
-	if (pin > S3C_GPIO_END)
-		return NULL;
-
-	chip = &s3c24xx_gpios[pin/32];
-	return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
-}
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio.h b/arch/arm/mach-s3c24xx/include/mach/gpio.h
index 6fac70f..1459156 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gpio.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio.h
- *
+/*
  * Copyright (c) 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -15,6 +14,9 @@
  * devices that need GPIO.
  */
 
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H __FILE__
+
 #ifdef CONFIG_CPU_S3C244X
 #define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
 #elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
@@ -23,8 +25,83 @@
 #define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
 #endif
 
-#include <mach/gpio-nrs.h>
-#include <mach/gpio-fns.h>
+/*
+ * GPIO sizes for various SoCs:
+ *
+ *   2410 2412 2440 2443 2416
+ *             2442
+ *   ---- ---- ---- ---- ----
+ * A  23   22   25   16   25
+ * B  11   11   11   11   9
+ * C  16   15   16   16   16
+ * D  16   16   16   16   16
+ * E  16   16   16   16   16
+ * F  8    8    8    8    8
+ * G  16   16   16   16   8
+ * H  11   11   9    15   15
+ * J  --   --   13   16   --
+ * K  --   --   --   --   16
+ * L  --   --   --   15   7
+ * M  --   --   --   2    2
+ */
+
+/* GPIO bank sizes */
+
+#define S3C2410_GPIO_A_NR	(32)
+#define S3C2410_GPIO_B_NR	(32)
+#define S3C2410_GPIO_C_NR	(32)
+#define S3C2410_GPIO_D_NR	(32)
+#define S3C2410_GPIO_E_NR	(32)
+#define S3C2410_GPIO_F_NR	(32)
+#define S3C2410_GPIO_G_NR	(32)
+#define S3C2410_GPIO_H_NR	(32)
+#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
+#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+	S3C2410_GPIO_A_START = 0,
+	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
+
+#include <plat/gpio-cfg.h>
 
 #ifdef CONFIG_CPU_S3C244X
 #define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
@@ -33,3 +110,5 @@
 #else
 #define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
 #endif
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h
deleted file mode 100644
index 2173934..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gta02.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _GTA02_H
-#define _GTA02_H
-
-#include <mach/regs-gpio.h>
-
-#define GTA02_GPIO_AUX_LED	S3C2410_GPB(2)
-#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB(9)
-#define GTA02_GPIO_AUX_KEY	S3C2410_GPF(6)
-#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF(7)
-#define GTA02_GPIO_AMP_SHUT	S3C2410_GPJ(1)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_HP_IN	S3C2410_GPJ(2)	/* v2 + v3 + v4 only */
-
-#define GTA02_IRQ_PCF50633	IRQ_EINT9
-
-#endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940.h b/arch/arm/mach-s3c24xx/include/mach/h1940.h
deleted file mode 100644
index 2aa683c..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/h1940.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/h1940.h
- *
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_H
-#define __ASM_ARCH_H1940_H
-
-#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT		(0x30081000)
-#define H1940_SUSPEND_CHECK		(0x30080000)
-
-extern void h1940_pm_return(void);
-extern int h1940_led_blink_set(unsigned gpio, int state,
-	unsigned long *delay_on, unsigned long *delay_off);
-
-
-#endif /* __ASM_ARCH_H1940_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h
index aef5631..a6cc14a 100644
--- a/arch/arm/mach-s3c24xx/include/mach/hardware.h
+++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h
@@ -23,12 +23,6 @@
 
 #endif /* CONFIG_CPU_S3C2440 */
 
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
 #endif /* __ASSEMBLY__ */
 
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/idle.h b/arch/arm/mach-s3c24xx/include/mach/idle.h
deleted file mode 100644
index e9ddd70..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/idle.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/idle.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU Idle controls
-*/
-
-#ifndef __ASM_ARCH_IDLE_H
-#define __ASM_ARCH_IDLE_H __FILE__
-
-/* This allows the over-ride of the default idle code, in case there
- * is any other things to be done over idle (like DVS)
-*/
-
-extern void (*s3c24xx_idle)(void);
-
-extern void s3c24xx_default_idle(void);
-
-#endif /* __ASM_ARCH_IDLE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
deleted file mode 100644
index e9e36b0..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
- *
- * Copyright 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_OSIRISCPLD_H
-#define __ASM_ARCH_OSIRISCPLD_H
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL		(0x3)
-#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
-#define OSIRIS_CTRL0_PCMCIA		(1<<4)
-#define OSIRIS_CTRL0_FIX8		(1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
-
-#define OSIRIS_CTRL1_FIX8		(1<<0)
-
-#define OSIRIS_ID_REVMASK		(0x7)
-
-#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/otom-map.h b/arch/arm/mach-s3c24xx/include/mach/otom-map.h
deleted file mode 100644
index f9277a5..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/otom-map.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/otom-map.h
- *
- * (c) 2005 Guillaume GOURAT / NexVision
- *          guillaume.gourat@nexvision.fr
- *
- * NexVision OTOM board memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x01300000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space.
- */
-
-#ifndef __ASM_ARCH_OTOMMAP_H
-#define __ASM_ARCH_OTOMMAP_H
-
-#define OTOM_PA_CS8900A_BASE       (S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE       S3C2410_ADDR(0x04000000)		/* 0xF4000000 */
-
-/* physical offset addresses for the peripherals */
-
-#define OTOM_PA_FLASH0_BASE        (S3C2410_CS0)				/* Bank 0 */
-
-#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index a11a638..c2ef016 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -14,8 +14,6 @@
 #ifndef __ASM_ARCH_REGS_GPIO_H
 #define __ASM_ARCH_REGS_GPIO_H
 
-#include <mach/gpio-nrs.h>
-
 #define S3C24XX_MISCCR		S3C24XX_GPIOREG2(0x80)
 
 /* general configuration options */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
deleted file mode 100644
index e0c67b0..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Memory Control register definitions
-*/
-
-#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H
-
-#ifndef S3C2410_MEMREG
-#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-/* bus width, and wait state control */
-#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
-
-/* bank zero config - note, pinstrapped from OM pins! */
-#define S3C2410_BWSCON_DW0_16		(1<<1)
-#define S3C2410_BWSCON_DW0_32		(2<<1)
-
-/* bank one configs */
-#define S3C2410_BWSCON_DW1_8		(0<<4)
-#define S3C2410_BWSCON_DW1_16		(1<<4)
-#define S3C2410_BWSCON_DW1_32		(2<<4)
-#define S3C2410_BWSCON_WS1		(1<<6)
-#define S3C2410_BWSCON_ST1		(1<<7)
-
-/* bank 2 configurations */
-#define S3C2410_BWSCON_DW2_8		(0<<8)
-#define S3C2410_BWSCON_DW2_16		(1<<8)
-#define S3C2410_BWSCON_DW2_32		(2<<8)
-#define S3C2410_BWSCON_WS2		(1<<10)
-#define S3C2410_BWSCON_ST2		(1<<11)
-
-/* bank 3 configurations */
-#define S3C2410_BWSCON_DW3_8		(0<<12)
-#define S3C2410_BWSCON_DW3_16		(1<<12)
-#define S3C2410_BWSCON_DW3_32		(2<<12)
-#define S3C2410_BWSCON_WS3		(1<<14)
-#define S3C2410_BWSCON_ST3		(1<<15)
-
-/* bank 4 configurations */
-#define S3C2410_BWSCON_DW4_8		(0<<16)
-#define S3C2410_BWSCON_DW4_16		(1<<16)
-#define S3C2410_BWSCON_DW4_32		(2<<16)
-#define S3C2410_BWSCON_WS4		(1<<18)
-#define S3C2410_BWSCON_ST4		(1<<19)
-
-/* bank 5 configurations */
-#define S3C2410_BWSCON_DW5_8		(0<<20)
-#define S3C2410_BWSCON_DW5_16		(1<<20)
-#define S3C2410_BWSCON_DW5_32		(2<<20)
-#define S3C2410_BWSCON_WS5		(1<<22)
-#define S3C2410_BWSCON_ST5		(1<<23)
-
-/* bank 6 configurations */
-#define S3C2410_BWSCON_DW6_8		(0<<24)
-#define S3C2410_BWSCON_DW6_16		(1<<24)
-#define S3C2410_BWSCON_DW6_32		(2<<24)
-#define S3C2410_BWSCON_WS6		(1<<26)
-#define S3C2410_BWSCON_ST6		(1<<27)
-
-/* bank 7 configurations */
-#define S3C2410_BWSCON_DW7_8		(0<<28)
-#define S3C2410_BWSCON_DW7_16		(1<<28)
-#define S3C2410_BWSCON_DW7_32		(2<<28)
-#define S3C2410_BWSCON_WS7		(1<<30)
-#define S3C2410_BWSCON_ST7		(1<<31)
-
-/* accesor functions for getting BANK(n) configuration. (n != 0) */
-
-#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
-
-#define S3C2410_BWSCON_DW8		(0)
-#define S3C2410_BWSCON_DW16		(1)
-#define S3C2410_BWSCON_DW32		(2)
-#define S3C2410_BWSCON_WS		(1 << 2)
-#define S3C2410_BWSCON_ST		(1 << 3)
-
-/* memory set (rom, ram) */
-#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
-#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
-#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
-#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
-#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
-#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
-#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
-#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
-
-/* bank configuration registers */
-
-#define S3C2410_BANKCON_PMCnorm		(0x00)
-#define S3C2410_BANKCON_PMC4		(0x01)
-#define S3C2410_BANKCON_PMC8		(0x02)
-#define S3C2410_BANKCON_PMC16		(0x03)
-
-/* bank configurations for banks 0..7, note banks
- * 6 and 7 have different configurations depending on
- * the memory type bits */
-
-#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
-#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
-#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
-#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
-#define S3C2410_BANKCON_Tacp_SHIFT	(2)
-
-#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
-#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
-#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
-#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
-#define S3C2410_BANKCON_Tcah_SHIFT	(4)
-
-#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
-#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
-#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
-#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
-#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
-
-#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
-#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
-#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
-#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
-#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
-#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
-#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
-#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
-#define S3C2410_BANKCON_Tacc_SHIFT	(8)
-
-#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
-#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
-#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
-#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
-#define S3C2410_BANKCON_Tcos_SHIFT	(11)
-
-#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
-#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
-#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
-#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
-#define S3C2410_BANKCON_Tacs_SHIFT	(13)
-
-#define S3C2410_BANKCON_SRAM		(0x0 << 15)
-#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
-
-/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
-#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
-#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
-
-/* control column address select */
-#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
-#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
-#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
-
-#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
-#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
-#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
-#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
-
-/* refresh control */
-
-#define S3C2410_REFRESH_REFEN		(1<<23)
-#define S3C2410_REFRESH_SELF		(1<<22)
-#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
-
-#define S3C2410_REFRESH_TRP_MASK	(3<<20)
-#define S3C2410_REFRESH_TRP_2clk	(0<<20)
-#define S3C2410_REFRESH_TRP_3clk	(1<<20)
-#define S3C2410_REFRESH_TRP_4clk	(2<<20)
-
-#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
-#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
-#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
-#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
-#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
-
-
-/* mode select register(s) */
-
-#define  S3C2410_MRSRB_CL1		(0x00 << 4)
-#define  S3C2410_MRSRB_CL2		(0x02 << 4)
-#define  S3C2410_MRSRB_CL3		(0x03 << 4)
-
-/* bank size register */
-#define S3C2410_BANKSIZE_128M		(0x2 << 0)
-#define S3C2410_BANKSIZE_64M		(0x1 << 0)
-#define S3C2410_BANKSIZE_32M		(0x0 << 0)
-#define S3C2410_BANKSIZE_16M		(0x7 << 0)
-#define S3C2410_BANKSIZE_8M		(0x6 << 0)
-#define S3C2410_BANKSIZE_4M		(0x5 << 0)
-#define S3C2410_BANKSIZE_2M		(0x4 << 0)
-#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
-#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
-#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
-#define S3C2410_BANKSIZE_BURST		(1<<7)
-
-#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-power.h b/arch/arm/mach-s3c24xx/include/mach/regs-power.h
deleted file mode 100644
index 4932b87..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-power.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-power.h
- *
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX power control register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON	S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG		S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0		S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1		S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2		S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3		S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ			(1<<0)
-#define S3C2412_PWRCFG_BATF_IGNORE		(2<<0)
-#define S3C2412_PWRCFG_BATF_SLEEP		(3<<0)
-#define S3C2412_PWRCFG_BATF_MASK		(3<<0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3<<6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ		(1<<8)
-#define S3C2412_PWRCFG_NAND_NORST		(1<<9)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
deleted file mode 100644
index fb63525..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2412_MEM
-#define __ASM_ARM_REGS_S3C2412_MEM
-
-#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
-
-#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
-#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
-
-#define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
-#define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
-#define S3C2412_BANKCON2		S3C2412_MEMREG(0x08)
-#define S3C2412_BANKCON3		S3C2412_MEMREG(0x0C)
-
-#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
-#define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
-
-/* EBI control registers */
-
-#define S3C2412_EBI_PR			S3C2412_EBIREG(0x00)
-#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x04)
-
-/* SSMC control registers */
-
-#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x00)
-#define S3C2412_SMIDCYR(x)		S3C2412_SSMC(x, 0x00)
-#define S3C2412_SMBWSTRD(x)		S3C2412_SSMC(x, 0x04)
-#define S3C2412_SMBWSTWRR(x)		S3C2412_SSMC(x, 0x08)
-#define S3C2412_SMBWSTOENR(x)		S3C2412_SSMC(x, 0x0C)
-#define S3C2412_SMBWSTWENR(x)		S3C2412_SSMC(x, 0x10)
-#define S3C2412_SMBCR(x)		S3C2412_SSMC(x, 0x14)
-#define S3C2412_SMBSR(x)		S3C2412_SSMC(x, 0x18)
-#define S3C2412_SMBWSTBRDR(x)		S3C2412_SSMC(x, 0x1C)
-
-#endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
deleted file mode 100644
index aa69dc7..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
- *
- * Copyright 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_H
-#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
-
-#define S3C2412_SWRST		(S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET	(0x533C2412)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif	/* __ASM_ARCH_REGS_S3C2412_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
deleted file mode 100644
index 2f31b74..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2416_MEM
-#define __ASM_ARM_REGS_S3C2416_MEM
-
-#ifndef S3C2416_MEMREG
-#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-#define S3C2416_BANKCFG			S3C2416_MEMREG(0x00)
-#define S3C2416_BANKCON1		S3C2416_MEMREG(0x04)
-#define S3C2416_BANKCON2		S3C2416_MEMREG(0x08)
-#define S3C2416_BANKCON3		S3C2416_MEMREG(0x0C)
-
-#define S3C2416_REFRESH			S3C2416_MEMREG(0x10)
-#define S3C2416_TIMEOUT			S3C2416_MEMREG(0x14)
-
-#endif /*  __ASM_ARM_REGS_S3C2416_MEM */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
deleted file mode 100644
index e443167..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2416_H
-#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
-
-#define S3C2416_SWRST		(S3C24XX_VA_CLKPWR + 0x44)
-#define S3C2416_SWRST_RESET	(0x533C2416)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif	/* __ASM_ARCH_REGS_S3C2416_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
deleted file mode 100644
index e411991..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000CPLD_H
-#define __ASM_ARCH_VR1000CPLD_H
-
-#define VR1000_CPLD_CTRL2_RAMWEN     (0x04)   /* SRAM Write Enable */
-
-#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
deleted file mode 100644
index 47add13..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000IRQ_H
-#define __ASM_ARCH_VR1000IRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC	     IRQ_EINT19
-#define IRQ_IDE0	     IRQ_EINT16
-#define IRQ_IDE1	     IRQ_EINT17
-#define IRQ_VR1000_SERIAL    IRQ_EINT12
-#define IRQ_VR1000_DM9000A   IRQ_EINT10
-#define IRQ_VR1000_DM9000N   IRQ_EINT9
-#define IRQ_SMALERT	     IRQ_EINT8
-
-#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
deleted file mode 100644
index 28376e5..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_VR1000MAP_H
-#define __ASM_ARCH_VR1000MAP_H
-
-#include <mach/bast-map.h>
-
-#define VR1000_IOADDR(x) BAST_IOADDR(x)
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1	    VR1000_IOADDR(0x00000000)	 /* 0x01300000 */
-#define VR1000_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2	    VR1000_IOADDR(0x00100000)	 /* 0x01400000 */
-#define VR1000_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3	    VR1000_IOADDR(0x00200000)	 /* 0x01500000 */
-#define VR1000_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4	    VR1000_IOADDR(0x00300000)	 /* 0x01600000 */
-#define VR1000_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ  VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW  VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE (0xE0000000)
-
-#define VR1000_VA_ISAIO		   (VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM	   (VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI	   (VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX	   (VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC	   (VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX	   (VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET	   (VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000	   (VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO	   (VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI	   (0x02000000)
-#define VR1000_PA_IDEPRIAUX	   (0x02800000)
-#define VR1000_PA_IDESEC	   (0x03000000)
-#define VR1000_PA_IDESECAUX	   (0x03800000)
-#define VR1000_PA_DM9000	   (0x05000000)
-
-#define VR1000_PA_SERIAL	   (0x11800000)
-#define VR1000_VA_SERIAL	   (VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM		   (S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS	 VR1000_VAM_CS4
-
-#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c2410-iotiming.c
rename to arch/arm/mach-s3c24xx/iotiming-s3c2410.c
index b1908e5..4cd13ab 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
- *
+/*
  * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -20,11 +19,12 @@
 #include <linux/slab.h>
 
 #include <mach/map.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu-freq-core.h>
 
+#include "regs-mem.h"
+
 #define print_ns(x) ((x) / 10), ((x) % 10)
 
 /**
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c2412-iotiming.c
rename to arch/arm/mach-s3c24xx/iotiming-s3c2412.c
index 48eee39..663436d 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
- *
+/*
  * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -28,12 +27,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/regs-s3c2412-mem.h>
-
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 #include <plat/clock.h>
 
+#include "s3c2412.h"
+
 #define print_ns(x) ((x) / 10), ((x) % 10)
 
 /**
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
index 0efb2e2..e119959 100644
--- a/arch/arm/mach-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c24xx/irq-pm.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/syscore_ops.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -29,18 +30,18 @@
  * set bit to 1 in allow bitfield to enable the wakeup settings on it
 */
 
-unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_intallow	= 1L << 30 | 0xfL;
 unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
 
 int s3c_irq_wake(struct irq_data *data, unsigned int state)
 {
-	unsigned long irqbit = 1 << (data->irq - IRQ_EINT0);
+	unsigned long irqbit = 1 << data->hwirq;
 
 	if (!(s3c_irqwake_intallow & irqbit))
 		return -ENOENT;
 
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", data->irq);
+	pr_info("wake %s for hwirq %lu\n",
+		state ? "enabled" : "disabled", data->hwirq);
 
 	if (!state)
 		s3c_irqwake_intmask |= irqbit;
@@ -64,7 +65,7 @@
 static unsigned long save_eintflt[4];
 static unsigned long save_eintmask;
 
-int s3c24xx_irq_suspend(void)
+static int s3c24xx_irq_suspend(void)
 {
 	unsigned int i;
 
@@ -80,7 +81,7 @@
 	return 0;
 }
 
-void s3c24xx_irq_resume(void)
+static void s3c24xx_irq_resume(void)
 {
 	unsigned int i;
 
@@ -93,3 +94,31 @@
 	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
 }
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+#ifdef CONFIG_CPU_S3C2416
+static struct sleep_save s3c2416_irq_save[] = {
+	SAVE_ITEM(S3C2416_INTMSK2),
+};
+
+static int s3c2416_irq_suspend(void)
+{
+	s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+
+	return 0;
+}
+
+static void s3c2416_irq_resume(void)
+{
+	s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+}
+
+struct syscore_ops s3c2416_irq_syscore_ops = {
+	.suspend	= s3c2416_irq_suspend,
+	.resume		= s3c2416_irq_resume,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c
index e65619d..67d7631 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2412.c
@@ -33,12 +33,13 @@
 
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-power.h>
 
 #include <plat/cpu.h>
 #include <plat/irq.h>
 #include <plat/pm.h>
 
+#include "s3c2412-power.h"
+
 #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
 #define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
 
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c
deleted file mode 100644
index ff141b0..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2416.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/irq.c
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len)
-{
-	unsigned int subsrc, submsk;
-	unsigned int end;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc  &= ~submsk;
-	subsrc >>= (irq - S3C2410_IRQSUB(0));
-	subsrc  &= (1 << len)-1;
-
-	end = len + irq;
-
-	for (; irq < end && subsrc; irq++) {
-		if (subsrc & 1)
-			generic_handle_irq(irq);
-
-		subsrc >>= 1;
-	}
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2416_irq_wdtac97_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2416_irq_wdtac97 = {
-	.irq_mask	= s3c2416_irq_wdtac97_mask,
-	.irq_unmask	= s3c2416_irq_wdtac97_unmask,
-	.irq_ack	= s3c2416_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2416_irq_lcd_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2416_irq_lcd = {
-	.irq_mask	= s3c2416_irq_lcd_mask,
-	.irq_unmask	= s3c2416_irq_lcd_unmask,
-	.irq_ack	= s3c2416_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-
-static void s3c2416_irq_dma_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2416_irq_dma_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2416_irq_dma_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2416_irq_dma = {
-	.irq_mask	= s3c2416_irq_dma_mask,
-	.irq_unmask	= s3c2416_irq_dma_unmask,
-	.irq_ack	= s3c2416_irq_dma_ack,
-};
-
-/* UART3 sub interrupts */
-
-static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2416_irq_uart3_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2416_irq_uart3 = {
-	.irq_mask	= s3c2416_irq_uart3_mask,
-	.irq_unmask	= s3c2416_irq_uart3_unmask,
-	.irq_ack	= s3c2416_irq_uart3_ack,
-};
-
-/* second interrupt register */
-
-static inline void s3c2416_irq_ack_second(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
-
-	__raw_writel(bitval, S3C2416_SRCPND2);
-	__raw_writel(bitval, S3C2416_INTPND2);
-}
-
-static void s3c2416_irq_mask_second(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2416_INTMSK2);
-	mask |= bitval;
-	__raw_writel(mask, S3C2416_INTMSK2);
-}
-
-static void s3c2416_irq_unmask_second(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2416_INTMSK2);
-	mask &= ~bitval;
-	__raw_writel(mask, S3C2416_INTMSK2);
-}
-
-struct irq_chip s3c2416_irq_second = {
-	.irq_ack	= s3c2416_irq_ack_second,
-	.irq_mask	= s3c2416_irq_mask_second,
-	.irq_unmask	= s3c2416_irq_unmask_second,
-};
-
-
-/* IRQ initialisation code */
-
-static int s3c2416_add_sub(unsigned int base,
-				   void (*demux)(unsigned int,
-						 struct irq_desc *),
-				   struct irq_chip *chip,
-				   unsigned int start, unsigned int end)
-{
-	unsigned int irqno;
-
-	irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
-	irq_set_chained_handler(base, demux);
-
-	for (irqno = start; irqno <= end; irqno++) {
-		irq_set_chip_and_handler(irqno, chip, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static void s3c2416_irq_add_second(void)
-{
-	unsigned long pend;
-	unsigned long last;
-	int irqno;
-	int i;
-
-	/* first, clear all interrupts pending... */
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2416_INTPND2);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C2416_SRCPND2);
-		__raw_writel(pend, S3C2416_INTPND2);
-		printk(KERN_INFO "irq: clearing pending status %08x\n",
-		       (int)pend);
-		last = pend;
-	}
-
-	for (irqno = IRQ_S3C2416_2D; irqno <= IRQ_S3C2416_I2S1; irqno++) {
-		switch (irqno) {
-		case IRQ_S3C2416_RESERVED2:
-		case IRQ_S3C2416_RESERVED3:
-			/* no IRQ here */
-			break;
-		default:
-			irq_set_chip_and_handler(irqno, &s3c2416_irq_second,
-						 handle_edge_irq);
-			set_irq_flags(irqno, IRQF_VALID);
-		}
-	}
-}
-
-static int s3c2416_irq_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	printk(KERN_INFO "S3C2416: IRQ Support\n");
-
-	s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd,
-			IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4);
-
-	s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma,
-			&s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
-	s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3,
-			&s3c2416_irq_uart3,
-			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
-	s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97,
-			&s3c2416_irq_wdtac97,
-			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
-	s3c2416_irq_add_second();
-
-	return 0;
-}
-
-static struct subsys_interface s3c2416_irq_interface = {
-	.name		= "s3c2416_irq",
-	.subsys		= &s3c2416_subsys,
-	.add_dev	= s3c2416_irq_add,
-};
-
-static int __init s3c2416_irq_init(void)
-{
-	return subsys_interface_register(&s3c2416_irq_interface);
-}
-
-arch_initcall(s3c2416_irq_init);
-
-#ifdef CONFIG_PM
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C2416_INTMSK2),
-};
-
-int s3c2416_irq_suspend(void)
-{
-	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
-	return 0;
-}
-
-void s3c2416_irq_resume(void)
-{
-	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-}
-
-struct syscore_ops s3c2416_irq_syscore_ops = {
-	.suspend	= s3c2416_irq_suspend,
-	.resume		= s3c2416_irq_resume,
-};
-#endif
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2443.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c
deleted file mode 100644
index 5e69109..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2443.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/irq.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
-{
-	unsigned int subsrc, submsk;
-	unsigned int end;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc  &= ~submsk;
-	subsrc >>= (irq - S3C2410_IRQSUB(0));
-	subsrc  &= (1 << len)-1;
-
-	end = len + irq;
-
-	for (; irq < end && subsrc; irq++) {
-		if (subsrc & 1)
-			generic_handle_irq(irq);
-
-		subsrc >>= 1;
-	}
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2443_irq_wdtac97_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2443_irq_wdtac97_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2443_irq_wdtac97_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2443_irq_wdtac97 = {
-	.irq_mask	= s3c2443_irq_wdtac97_mask,
-	.irq_unmask	= s3c2443_irq_wdtac97_unmask,
-	.irq_ack	= s3c2443_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2443_irq_lcd_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2443_irq_lcd_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2443_irq_lcd_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2443_irq_lcd = {
-	.irq_mask	= s3c2443_irq_lcd_mask,
-	.irq_unmask	= s3c2443_irq_lcd_unmask,
-	.irq_ack	= s3c2443_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-static void s3c2443_irq_dma_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2443_irq_dma_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2443_irq_dma_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2443_irq_dma = {
-	.irq_mask	= s3c2443_irq_dma_mask,
-	.irq_unmask	= s3c2443_irq_dma_unmask,
-	.irq_ack	= s3c2443_irq_dma_ack,
-};
-
-/* UART3 sub interrupts */
-
-static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2443_irq_uart3_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2443_irq_uart3_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2443_irq_uart3_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2443_irq_uart3 = {
-	.irq_mask	= s3c2443_irq_uart3_mask,
-	.irq_unmask	= s3c2443_irq_uart3_unmask,
-	.irq_ack	= s3c2443_irq_uart3_ack,
-};
-
-/* CAM sub interrupts */
-
-static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4);
-}
-
-#define INTMSK_CAM	(1UL << (IRQ_CAM - IRQ_EINT0))
-#define SUBMSK_CAM	INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P)
-
-static void s3c2443_irq_cam_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_CAM, SUBMSK_CAM);
-}
-
-static void s3c2443_irq_cam_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void s3c2443_irq_cam_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_CAM, SUBMSK_CAM);
-}
-
-static struct irq_chip s3c2443_irq_cam = {
-	.irq_mask	= s3c2443_irq_cam_mask,
-	.irq_unmask	= s3c2443_irq_cam_unmask,
-	.irq_ack	= s3c2443_irq_cam_ack,
-};
-
-/* IRQ initialisation code */
-
-static int s3c2443_add_sub(unsigned int base,
-				   void (*demux)(unsigned int,
-						 struct irq_desc *),
-				   struct irq_chip *chip,
-				   unsigned int start, unsigned int end)
-{
-	unsigned int irqno;
-
-	irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
-	irq_set_chained_handler(base, demux);
-
-	for (irqno = start; irqno <= end; irqno++) {
-		irq_set_chip_and_handler(irqno, chip, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static int s3c2443_irq_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	printk("S3C2443: IRQ Support\n");
-
-	s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam,
-			IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P);
-
-	s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd,
-			IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4);
-
-	s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma,
-			&s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
-	s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3,
-			&s3c2443_irq_uart3,
-			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
-	s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97,
-			&s3c2443_irq_wdtac97,
-			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2443_irq_interface = {
-	.name		= "s3c2443_irq",
-	.subsys		= &s3c2443_subsys,
-	.add_dev	= s3c2443_irq_add,
-};
-
-static int __init s3c2443_irq_init(void)
-{
-	return subsys_interface_register(&s3c2443_irq_interface);
-}
-
-arch_initcall(s3c2443_irq_init);
-
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
new file mode 100644
index 0000000..cb9f5e0
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -0,0 +1,822 @@
+/*
+ * S3C24XX IRQ handling
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/irqdomain.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-irqtype.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+#define S3C_IRQTYPE_NONE	0
+#define S3C_IRQTYPE_EINT	1
+#define S3C_IRQTYPE_EDGE	2
+#define S3C_IRQTYPE_LEVEL	3
+
+struct s3c_irq_data {
+	unsigned int type;
+	unsigned long parent_irq;
+
+	/* data gets filled during init */
+	struct s3c_irq_intc *intc;
+	unsigned long sub_bits;
+	struct s3c_irq_intc *sub_intc;
+};
+
+/*
+ * Sructure holding the controller data
+ * @reg_pending		register holding pending irqs
+ * @reg_intpnd		special register intpnd in main intc
+ * @reg_mask		mask register
+ * @domain		irq_domain of the controller
+ * @parent		parent controller for ext and sub irqs
+ * @irqs		irq-data, always s3c_irq_data[32]
+ */
+struct s3c_irq_intc {
+	void __iomem		*reg_pending;
+	void __iomem		*reg_intpnd;
+	void __iomem		*reg_mask;
+	struct irq_domain	*domain;
+	struct s3c_irq_intc	*parent;
+	struct s3c_irq_data	*irqs;
+};
+
+static void s3c_irq_mask(struct irq_data *data)
+{
+	struct s3c_irq_intc *intc = data->domain->host_data;
+	struct s3c_irq_intc *parent_intc = intc->parent;
+	struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
+	struct s3c_irq_data *parent_data;
+	unsigned long mask;
+	unsigned int irqno;
+
+	mask = __raw_readl(intc->reg_mask);
+	mask |= (1UL << data->hwirq);
+	__raw_writel(mask, intc->reg_mask);
+
+	if (parent_intc && irq_data->parent_irq) {
+		parent_data = &parent_intc->irqs[irq_data->parent_irq];
+
+		/* check to see if we need to mask the parent IRQ */
+		if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
+			irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+			s3c_irq_mask(irq_get_irq_data(irqno));
+		}
+	}
+}
+
+static void s3c_irq_unmask(struct irq_data *data)
+{
+	struct s3c_irq_intc *intc = data->domain->host_data;
+	struct s3c_irq_intc *parent_intc = intc->parent;
+	struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
+	unsigned long mask;
+	unsigned int irqno;
+
+	mask = __raw_readl(intc->reg_mask);
+	mask &= ~(1UL << data->hwirq);
+	__raw_writel(mask, intc->reg_mask);
+
+	if (parent_intc && irq_data->parent_irq) {
+		irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+		s3c_irq_unmask(irq_get_irq_data(irqno));
+	}
+}
+
+static inline void s3c_irq_ack(struct irq_data *data)
+{
+	struct s3c_irq_intc *intc = data->domain->host_data;
+	unsigned long bitval = 1UL << data->hwirq;
+
+	__raw_writel(bitval, intc->reg_pending);
+	if (intc->reg_intpnd)
+		__raw_writel(bitval, intc->reg_intpnd);
+}
+
+static int s3c_irqext_type_set(void __iomem *gpcon_reg,
+			       void __iomem *extint_reg,
+			       unsigned long gpcon_offset,
+			       unsigned long extint_offset,
+			       unsigned int type)
+{
+	unsigned long newvalue = 0, value;
+
+	/* Set the GPIO to external interrupt mode */
+	value = __raw_readl(gpcon_reg);
+	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+	__raw_writel(value, gpcon_reg);
+
+	/* Set the external interrupt to pointed trigger type */
+	switch (type)
+	{
+		case IRQ_TYPE_NONE:
+			pr_warn("No edge setting!\n");
+			break;
+
+		case IRQ_TYPE_EDGE_RISING:
+			newvalue = S3C2410_EXTINT_RISEEDGE;
+			break;
+
+		case IRQ_TYPE_EDGE_FALLING:
+			newvalue = S3C2410_EXTINT_FALLEDGE;
+			break;
+
+		case IRQ_TYPE_EDGE_BOTH:
+			newvalue = S3C2410_EXTINT_BOTHEDGE;
+			break;
+
+		case IRQ_TYPE_LEVEL_LOW:
+			newvalue = S3C2410_EXTINT_LOWLEV;
+			break;
+
+		case IRQ_TYPE_LEVEL_HIGH:
+			newvalue = S3C2410_EXTINT_HILEV;
+			break;
+
+		default:
+			pr_err("No such irq type %d", type);
+			return -EINVAL;
+	}
+
+	value = __raw_readl(extint_reg);
+	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+	__raw_writel(value, extint_reg);
+
+	return 0;
+}
+
+/* FIXME: make static when it's out of plat-samsung/irq.h */
+int s3c_irqext_type(struct irq_data *data, unsigned int type)
+{
+	void __iomem *extint_reg;
+	void __iomem *gpcon_reg;
+	unsigned long gpcon_offset, extint_offset;
+
+	if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (data->hwirq) * 2;
+		extint_offset = (data->hwirq) * 4;
+	} else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT1;
+		gpcon_offset = (data->hwirq - 8) * 2;
+		extint_offset = (data->hwirq - 8) * 4;
+	} else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT2;
+		gpcon_offset = (data->hwirq - 8) * 2;
+		extint_offset = (data->hwirq - 16) * 4;
+	} else {
+		return -EINVAL;
+	}
+
+	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+				   extint_offset, type);
+}
+
+static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
+{
+	void __iomem *extint_reg;
+	void __iomem *gpcon_reg;
+	unsigned long gpcon_offset, extint_offset;
+
+	if ((data->hwirq >= 0) && (data->hwirq <= 3)) {
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (data->hwirq) * 2;
+		extint_offset = (data->hwirq) * 4;
+	} else {
+		return -EINVAL;
+	}
+
+	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+				   extint_offset, type);
+}
+
+struct irq_chip s3c_irq_chip = {
+	.name		= "s3c",
+	.irq_ack	= s3c_irq_ack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake
+};
+
+struct irq_chip s3c_irq_level_chip = {
+	.name		= "s3c-level",
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_ack	= s3c_irq_ack,
+};
+
+static struct irq_chip s3c_irqext_chip = {
+	.name		= "s3c-ext",
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_ack	= s3c_irq_ack,
+	.irq_set_type	= s3c_irqext_type,
+	.irq_set_wake	= s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+	.name		= "s3c-ext0",
+	.irq_ack	= s3c_irq_ack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake,
+	.irq_set_type	= s3c_irqext0_type,
+};
+
+static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct s3c_irq_intc *intc = desc->irq_data.domain->host_data;
+	struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq];
+	struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
+	unsigned long src;
+	unsigned long msk;
+	unsigned int n;
+
+	chained_irq_enter(chip, desc);
+
+	src = __raw_readl(sub_intc->reg_pending);
+	msk = __raw_readl(sub_intc->reg_mask);
+
+	src &= ~msk;
+	src &= irq_data->sub_bits;
+
+	while (src) {
+		n = __ffs(src);
+		src &= ~(1 << n);
+		generic_handle_irq(irq_find_mapping(sub_intc->domain, n));
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+	u32 intmod;
+	unsigned offs;
+
+	if (on) {
+		offs = irq - FIQ_START;
+		if (offs > 31)
+			return -EINVAL;
+
+		intmod = 1 << offs;
+	} else {
+		intmod = 0;
+	}
+
+	__raw_writel(intmod, S3C2410_INTMOD);
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
+#endif
+
+static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
+							irq_hw_number_t hw)
+{
+	struct s3c_irq_intc *intc = h->host_data;
+	struct s3c_irq_data *irq_data = &intc->irqs[hw];
+	struct s3c_irq_intc *parent_intc;
+	struct s3c_irq_data *parent_irq_data;
+	unsigned int irqno;
+
+	if (!intc) {
+		pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw);
+		return -EINVAL;
+	}
+
+	if (!irq_data) {
+		pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw);
+		return -EINVAL;
+	}
+
+	/* attach controller pointer to irq_data */
+	irq_data->intc = intc;
+
+	/* set handler and flags */
+	switch (irq_data->type) {
+	case S3C_IRQTYPE_NONE:
+		return 0;
+	case S3C_IRQTYPE_EINT:
+		if (irq_data->parent_irq)
+			irq_set_chip_and_handler(virq, &s3c_irqext_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
+						 handle_edge_irq);
+		break;
+	case S3C_IRQTYPE_EDGE:
+		if (irq_data->parent_irq ||
+		    intc->reg_pending == S3C2416_SRCPND2)
+			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_chip,
+						 handle_edge_irq);
+		break;
+	case S3C_IRQTYPE_LEVEL:
+		if (irq_data->parent_irq)
+			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+						 handle_level_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_chip,
+						 handle_level_irq);
+		break;
+	default:
+		pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
+		return -EINVAL;
+	}
+	set_irq_flags(virq, IRQF_VALID);
+
+	if (irq_data->parent_irq) {
+		parent_intc = intc->parent;
+		if (!parent_intc) {
+			pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n",
+			       hw);
+			goto err;
+		}
+
+		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+		if (!irq_data) {
+			pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n",
+			       hw);
+			goto err;
+		}
+
+		parent_irq_data->sub_intc = intc;
+		parent_irq_data->sub_bits |= (1UL << hw);
+
+		/* attach the demuxer to the parent irq */
+		irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+		if (!irqno) {
+			pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
+			       irq_data->parent_irq);
+			goto err;
+		}
+		irq_set_chained_handler(irqno, s3c_irq_demux);
+	}
+
+	return 0;
+
+err:
+	set_irq_flags(virq, 0);
+
+	/* the only error can result from bad mapping data*/
+	return -EINVAL;
+}
+
+static struct irq_domain_ops s3c24xx_irq_ops = {
+	.map = s3c24xx_irq_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
+{
+	void __iomem *reg_source;
+	unsigned long pend;
+	unsigned long last;
+	int i;
+
+	/* if intpnd is set, read the next pending irq from there */
+	reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
+
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(reg_source);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		__raw_writel(pend, intc->reg_pending);
+		if (intc->reg_intpnd)
+			__raw_writel(pend, intc->reg_intpnd);
+
+		pr_info("irq: clearing pending status %08x\n", (int)pend);
+		last = pend;
+	}
+}
+
+struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
+				       struct s3c_irq_data *irq_data,
+				       struct s3c_irq_intc *parent,
+				       unsigned long address)
+{
+	struct s3c_irq_intc *intc;
+	void __iomem *base = (void *)0xf6000000; /* static mapping */
+	int irq_num;
+	int irq_start;
+	int irq_offset;
+	int ret;
+
+	intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+	if (!intc)
+		return ERR_PTR(-ENOMEM);
+
+	intc->irqs = irq_data;
+
+	if (parent)
+		intc->parent = parent;
+
+	/* select the correct data for the controller.
+	 * Need to hard code the irq num start and offset
+	 * to preserve the static mapping for now
+	 */
+	switch (address) {
+	case 0x4a000000:
+		pr_debug("irq: found main intc\n");
+		intc->reg_pending = base;
+		intc->reg_mask = base + 0x08;
+		intc->reg_intpnd = base + 0x10;
+		irq_num = 32;
+		irq_start = S3C2410_IRQ(0);
+		irq_offset = 0;
+		break;
+	case 0x4a000018:
+		pr_debug("irq: found subintc\n");
+		intc->reg_pending = base + 0x18;
+		intc->reg_mask = base + 0x1c;
+		irq_num = 29;
+		irq_start = S3C2410_IRQSUB(0);
+		irq_offset = 0;
+		break;
+	case 0x4a000040:
+		pr_debug("irq: found intc2\n");
+		intc->reg_pending = base + 0x40;
+		intc->reg_mask = base + 0x48;
+		intc->reg_intpnd = base + 0x50;
+		irq_num = 8;
+		irq_start = S3C2416_IRQ(0);
+		irq_offset = 0;
+		break;
+	case 0x560000a4:
+		pr_debug("irq: found eintc\n");
+		base = (void *)0xfd000000;
+
+		intc->reg_mask = base + 0xa4;
+		intc->reg_pending = base + 0x08;
+		irq_num = 20;
+		irq_start = S3C2410_IRQ(32);
+		irq_offset = 4;
+		break;
+	default:
+		pr_err("irq: unsupported controller address\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* now that all the data is complete, init the irq-domain */
+	s3c24xx_clear_intc(intc);
+	intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
+					     irq_offset, &s3c24xx_irq_ops,
+					     intc);
+	if (!intc->domain) {
+		pr_err("irq: could not create irq-domain\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	return intc;
+
+err:
+	kfree(intc);
+	return ERR_PTR(ret);
+}
+
+/* s3c24xx_init_irq
+ *
+ * Initialise S3C2410 IRQ system
+*/
+
+static struct s3c_irq_data init_base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_eint[32] = {
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
+};
+
+static struct s3c_irq_data init_subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+};
+
+void __init s3c24xx_init_irq(void)
+{
+	struct s3c_irq_intc *main_intc;
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000);
+	if (IS_ERR(main_intc)) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018);
+	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+}
+
+#ifdef CONFIG_CPU_S3C2416
+static struct s3c_irq_data init_s3c2416base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_NONE, },
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2416subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+static struct s3c_irq_data init_s3c2416_second[32] = {
+	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
+	{ .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
+	{ .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
+	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
+	{ .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
+};
+
+void __init s3c2416_init_irq(void)
+{
+	struct s3c_irq_intc *main_intc;
+
+	pr_info("S3C2416: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000);
+	if (IS_ERR(main_intc)) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+	s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018);
+
+	s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040);
+}
+
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+static struct s3c_irq_data init_s3c2443base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* CFON */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+
+static struct s3c_irq_data init_s3c2443subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+void __init s3c2443_init_irq(void)
+{
+	struct s3c_irq_intc *main_intc;
+
+	pr_info("S3C2443: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000);
+	if (IS_ERR(main_intc)) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+	s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018);
+}
+#endif
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index f4ad99c..0e0279e 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -237,6 +237,6 @@
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= amlm5900_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 1ee8c46..bb595f1 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -28,17 +28,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/anubis-map.h>
-#include <mach/anubis-irq.h>
-#include <mach/anubis-cpld.h>
-
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
@@ -55,8 +50,9 @@
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
-#include "simtec.h"
+#include "anubis.h"
 #include "common.h"
+#include "simtec.h"
 
 #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
 
@@ -237,7 +233,7 @@
 static struct resource anubis_ide0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
 	[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
-	[3] = DEFINE_RES_IRQ(IRQ_IDE0),
+	[3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
 };
 
 static struct platform_device anubis_device_ide0 = {
@@ -254,7 +250,7 @@
 static struct resource anubis_ide1_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
 	[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
-	[2] = DEFINE_RES_IRQ(IRQ_IDE0),
+	[2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
 };
 
 static struct platform_device anubis_device_ide1 = {
@@ -279,7 +275,7 @@
 
 static struct resource anubis_asix_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
-	[1] = DEFINE_RES_IRQ(IRQ_ASIX),
+	[1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
 };
 
 static struct platform_device anubis_device_asix = {
@@ -448,6 +444,6 @@
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 00381fe..b4bc60c 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/timer.h>
@@ -34,7 +35,6 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
@@ -210,6 +210,6 @@
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 6a30ce7..ca66180 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -24,48 +24,41 @@
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
-
-#include <net/ax88796.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/fb.h>
+#include <linux/serial_8250.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <linux/serial_8250.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#include <net/ax88796.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/fb.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/regs-serial.h>
 
-#include "simtec.h"
+#include "bast.h"
 #include "common.h"
+#include "simtec.h"
 
 #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
@@ -312,7 +305,7 @@
 static struct resource bast_dm9k_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
 	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
-	[2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
+	[2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
 					| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
@@ -343,7 +336,7 @@
 static struct plat_serial8250_port bast_sio_data[] = {
 	[0] = {
 		.mapbase	= SERIAL_BASE + 0x2f8,
-		.irq		= IRQ_PCSERIAL1,
+		.irq		= BAST_IRQ_PCSERIAL1,
 		.flags		= SERIAL_FLAGS,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -351,7 +344,7 @@
 	},
 	[1] = {
 		.mapbase	= SERIAL_BASE + 0x3f8,
-		.irq		= IRQ_PCSERIAL2,
+		.irq		= BAST_IRQ_PCSERIAL2,
 		.flags		= SERIAL_FLAGS,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -390,7 +383,7 @@
 static struct resource bast_asix_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
 	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
-	[2] = DEFINE_RES_IRQ(IRQ_ASIX),
+	[2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
 };
 
 static struct platform_device bast_device_asix = {
@@ -612,6 +605,6 @@
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= bast_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 973b87c..a25e8c5 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
  * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
  *
  * Copyright (C) 2006-2009 by Openmoko, Inc.
@@ -23,7 +21,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
  */
 
 #include <linux/kernel.h>
@@ -34,62 +31,59 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/s3c24xx.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
 
 #include <linux/mmc/host.h>
 
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/io.h>
 
-#include <linux/i2c.h>
 #include <linux/regulator/machine.h>
 
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
 
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/fb.h>
-
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <mach/regs-mem.h>
-#include <mach/hardware.h>
-
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <plat/gpio-cfg.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include <mach/fb.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
 
 #include "common.h"
+#include "gta02.h"
 
 static struct pcf50633 *gta02_pcf;
 
@@ -595,6 +589,6 @@
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index b23dd1b..79bc083 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-h1940.c
- *
+/*
  * Copyright (c) 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
@@ -37,40 +36,36 @@
 #include <linux/mmc/host.h>
 #include <linux/export.h>
 
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-clock.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-fns.h>
-#include <mach/gpio-nrs.h>
-
-#include <mach/h1940.h>
-#include <mach/h1940-latch.h>
-#include <mach/fb.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/pm.h>
 #include <linux/platform_data/mmc-s3cmci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 #include <sound/uda1380.h>
 
+#include <mach/fb.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/pll.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
+
+
 #include "common.h"
+#include "h1940.h"
 
 #define H1940_LATCH		((void __force __iomem *)0xF8000000)
 
@@ -746,6 +741,6 @@
 	.reserve	= h1940_reserve,
 	.init_irq	= h1940_init_irq,
 	.init_machine	= h1940_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index c9954e2..54e83c1 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -35,9 +35,7 @@
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/fb.h>
 
@@ -56,6 +54,8 @@
 #include <plat/pm.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 
+#include "s3c2412-power.h"
+
 static struct map_desc jive_iodesc[] __initdata = {
 };
 
@@ -661,6 +661,6 @@
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index a31d5b8..2865e59 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -40,7 +40,6 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/irqs.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
@@ -688,6 +687,6 @@
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index c53a9bf..d9d04b2 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -589,7 +589,7 @@
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
@@ -600,7 +600,7 @@
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index a2b92b0..a454e24 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -153,6 +153,6 @@
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index c52100e..ae2cbdf 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2440/mach-osiris.c
- *
+/*
  * Copyright (c) 2005-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -26,22 +25,12 @@
 
 #include <linux/i2c/tps65010.h>
 
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-
-#include <mach/osiris-map.h>
-#include <mach/osiris-cpld.h>
-
-#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
 
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -50,12 +39,20 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-serial.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
 #include "common.h"
+#include "osiris.h"
+#include "regs-mem.h"
 
 /* onboard perihperal map */
 
@@ -429,6 +426,6 @@
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index bca39f0..40a47d6 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-otom.c
+/*
  *
  * Copyright (c) 2004 Nex Vision
  *   Guillaume GOURAT <guillaume.gourat@nexvision.fr>
@@ -6,7 +6,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
@@ -19,26 +18,25 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/otom-map.h>
-
 #include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/s3c2410.h>
 #include <plat/clock.h>
-#include <plat/devs.h>
-#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+#include <plat/s3c2410.h>
 
 #include "common.h"
+#include "otom.h"
 
 static struct map_desc otom11_iodesc[] __initdata = {
   /* Device area */
@@ -118,6 +116,6 @@
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 7b6ba13..56175f0 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -343,6 +343,6 @@
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= qt2410_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 0606f2f..1f9ba2a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
- *
+/*
  * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
  * Copyright (c) 2007-2010 Vasily Khoruzhick
  *
@@ -37,31 +36,31 @@
 
 #include <linux/mmc/host.h>
 
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach-types.h>
 
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/h1940.h>
-#include <mach/fb.h>
-
-#include <plat/clock.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-iic.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 #include <sound/uda1380.h>
 
+#include <mach/fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/regs-iic.h>
+#include <plat/regs-serial.h>
+
 #include "common.h"
+#include "h1940.h"
 
 #define LCD_PWM_PERIOD 192960
 #define LCD_PWM_DUTY 127353
@@ -814,6 +813,6 @@
 	.reserve	= rx1950_reserve,
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
-	.timer = &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index dacbb9a..f20418a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -31,27 +31,27 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/map.h>
 
-#include <mach/hardware.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/h1940.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <mach/fb.h>
-
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/devs.h>
 #include <plat/pm.h>
+#include <plat/regs-serial.h>
 
 #include "common.h"
+#include "h1940.h"
 
 static struct map_desc rx3715_iodesc[] __initdata = {
 	/* dump ISA space somewhere unused */
@@ -212,6 +212,6 @@
 	.reserve	= rx3715_reserve,
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index 82796b9..e184bfa 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -117,6 +117,6 @@
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= smdk2410_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index ce99fd8..86d7847 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -37,7 +37,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/fb.h>
@@ -133,7 +132,7 @@
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
 
@@ -145,7 +144,7 @@
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
 
@@ -157,6 +156,6 @@
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index f30d7fc..ebb2e61 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -39,7 +39,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/regs-s3c2443-clock.h>
 
-#include <mach/idle.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -251,9 +250,9 @@
 	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
 	.atag_offset	= 0x100,
 
-	.init_irq	= s3c24xx_init_irq,
+	.init_irq	= s3c2416_init_irq,
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index b7ff882..08cc38c 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -35,7 +35,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -182,6 +181,6 @@
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 2568656..fc65d74 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -35,7 +35,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -141,9 +140,9 @@
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
 
-	.init_irq	= s3c24xx_init_irq,
+	.init_irq	= s3c2443_init_irq,
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2443_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 495bf5c..24b3d79 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -149,6 +149,6 @@
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= tct_hammer_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 14d5b12..ec42d1e 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-vr1000.c
- *
+/*
  * Copyright (c) 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
@@ -32,27 +31,25 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/bast-map.h>
-#include <mach/vr1000-map.h>
-#include <mach/vr1000-irq.h>
-#include <mach/vr1000-cpld.h>
-
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
-#include "simtec.h"
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+#include "bast.h"
 #include "common.h"
+#include "simtec.h"
+#include "vr1000.h"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -143,7 +140,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
 	[0] = {
 		.mapbase	= VR1000_SERIAL_MAPBASE(0),
-		.irq		= IRQ_VR1000_SERIAL + 0,
+		.irq		= VR1000_IRQ_SERIAL + 0,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -151,7 +148,7 @@
 	},
 	[1] = {
 		.mapbase	= VR1000_SERIAL_MAPBASE(1),
-		.irq		= IRQ_VR1000_SERIAL + 1,
+		.irq		= VR1000_IRQ_SERIAL + 1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -159,7 +156,7 @@
 	},
 	[2] = {
 		.mapbase	= VR1000_SERIAL_MAPBASE(2),
-		.irq		= IRQ_VR1000_SERIAL + 2,
+		.irq		= VR1000_IRQ_SERIAL + 2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -167,7 +164,7 @@
 	},
 	[3] = {
 		.mapbase	= VR1000_SERIAL_MAPBASE(3),
-		.irq		= IRQ_VR1000_SERIAL + 3,
+		.irq		= VR1000_IRQ_SERIAL + 3,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -189,14 +186,14 @@
 static struct resource vr1000_dm9k0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
 	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
-	[2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000A, 1, NULL, IORESOURCE_IRQ \
+	[2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \
 						| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct resource vr1000_dm9k1_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
 	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
-	[2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000N, 1, NULL, IORESOURCE_IRQ \
+	[2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \
 						| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
@@ -357,6 +354,6 @@
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index f1d44ae..3e2bfdd 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -36,7 +36,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <mach/fb.h>
 
 #include <linux/platform_data/i2c-s3c2410.h>
@@ -161,6 +160,6 @@
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h b/arch/arm/mach-s3c24xx/osiris.h
similarity index 68%
rename from arch/arm/mach-s3c24xx/include/mach/osiris-map.h
rename to arch/arm/mach-s3c24xx/osiris.h
index 17380f8..b8d5607 100644
--- a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h
+++ b/arch/arm/mach-s3c24xx/osiris.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
- *
+/*
  * Copyright 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
  *	Ben Dooks <ben@simtec.co.uk>
  *
+ * OSIRIS - CPLD control constants
  * OSIRIS - Memory map definitions
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,10 +11,21 @@
  * published by the Free Software Foundation.
 */
 
-/* needs arch/map.h including with this */
+#ifndef __MACH_S3C24XX_OSIRIS_H
+#define __MACH_S3C24XX_OSIRIS_H __FILE__
 
-#ifndef __ASM_ARCH_OSIRISMAP_H
-#define __ASM_ARCH_OSIRISMAP_H
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL		(0x3)
+#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
+#define OSIRIS_CTRL0_PCMCIA		(1<<4)
+#define OSIRIS_CTRL0_FIX8		(1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
+
+#define OSIRIS_CTRL1_FIX8		(1<<0)
+
+#define OSIRIS_ID_REVMASK		(0x7)
 
 /* start peripherals off after the S3C2410 */
 
@@ -39,4 +50,4 @@
 #define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
 #define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
 
-#endif /* __ASM_ARCH_OSIRISMAP_H */
+#endif /* __MACH_S3C24XX_OSIRIS_H */
diff --git a/arch/arm/mach-s3c24xx/otom.h b/arch/arm/mach-s3c24xx/otom.h
new file mode 100644
index 0000000..321b7be
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/otom.h
@@ -0,0 +1,28 @@
+/*
+ * (c) 2005 Guillaume GOURAT / NexVision
+ *          guillaume.gourat@nexvision.fr
+ *
+ * NexVision OTOM board memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/*
+ * ok, we've used up to 0x01300000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space.
+ */
+
+#ifndef __MACH_S3C24XX_OTOM_H
+#define __MACH_S3C24XX_OTOM_H __FILE__
+
+#define OTOM_PA_CS8900A_BASE	(S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE	S3C2410_ADDR(0x04000000)	/* 0xF4000000 */
+
+/* physical offset addresses for the peripherals */
+
+#define OTOM_PA_FLASH0_BASE	(S3C2410_CS0)
+
+#endif /* __MACH_S3C24XX_OTOM_H */
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c
similarity index 98%
rename from arch/arm/mach-s3c2410/pll.c
rename to arch/arm/mach-s3c24xx/pll-s3c2410.c
index e0b3b34..dcf3420 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/pll.c
- *
+/*
  * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -82,7 +81,6 @@
 	return subsys_interface_register(&s3c2410_plls_interface);
 
 }
-
 arch_initcall(s3c2410_pll_init);
 
 static struct subsys_interface s3c2410a_plls_interface = {
@@ -95,5 +93,4 @@
 {
 	return subsys_interface_register(&s3c2410a_plls_interface);
 }
-
 arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
similarity index 98%
rename from arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
rename to arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
index 551fb43..6737817 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
- *
+/*
  * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -83,7 +82,6 @@
 	return subsys_interface_register(&s3c2440_plls12_interface);
 
 }
-
 arch_initcall(s3c2440_pll_12mhz);
 
 static struct subsys_interface s3c2442_plls12_interface = {
@@ -97,5 +95,4 @@
 	return subsys_interface_register(&s3c2442_plls12_interface);
 
 }
-
 arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
similarity index 98%
rename from arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
rename to arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
index 3f15bcf..debfa10 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
- *
+/*
  * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -111,7 +110,6 @@
 {
 	return subsys_interface_register(&s3c2440_plls169344_interface);
 }
-
 arch_initcall(s3c2440_pll_16934400);
 
 static struct subsys_interface s3c2442_plls169344_interface = {
@@ -124,5 +122,4 @@
 {
 	return subsys_interface_register(&s3c2442_plls169344_interface);
 }
-
 arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c
index 949ae05..2d82c4f 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c
@@ -29,16 +29,16 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/h1940.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
+#include "h1940.h"
+
 static void s3c2410_pm_prepare(void)
 {
 	/* ensure at least GSTATUS3 has the resume address */
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index f5dc2b2..668a78a 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -21,19 +21,19 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/cacheflush.h>
 #include <asm/irq.h>
 
-#include <mach/regs-power.h>
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-
 #include <plat/s3c2412.h>
 
+#include "regs-dsc.h"
+#include "s3c2412-power.h"
+
 extern void s3c2412_sleep_enter(void);
 
 static int s3c2412_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c
index 1a9e8dd..4492389 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c
@@ -16,12 +16,13 @@
 
 #include <asm/cacheflush.h>
 
-#include <mach/regs-power.h>
 #include <mach/regs-s3c2443-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
+#include "s3c2412-power.h"
+
 extern void s3c2412_sleep_enter(void);
 
 static int s3c2416_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 724755f..caa5b72 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -38,7 +38,6 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-irq.h>
 
 #include <asm/mach/time.h>
@@ -46,6 +45,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/pm.h>
 
+#include "regs-mem.h"
+
 #define PFX "s3c24xx-pm: "
 
 static struct sleep_save core_save[] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/regs-dsc.h
rename to arch/arm/mach-s3c24xx/regs-dsc.h
diff --git a/arch/arm/mach-s3c24xx/regs-mem.h b/arch/arm/mach-s3c24xx/regs-mem.h
new file mode 100644
index 0000000..86b1258
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/regs-mem.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
+#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
+
+#define S3C2410_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
+
+#define S3C2410_BWSCON			S3C2410_MEMREG(0x00)
+#define S3C2410_BANKCON0		S3C2410_MEMREG(0x04)
+#define S3C2410_BANKCON1		S3C2410_MEMREG(0x08)
+#define S3C2410_BANKCON2		S3C2410_MEMREG(0x0C)
+#define S3C2410_BANKCON3		S3C2410_MEMREG(0x10)
+#define S3C2410_BANKCON4		S3C2410_MEMREG(0x14)
+#define S3C2410_BANKCON5		S3C2410_MEMREG(0x18)
+#define S3C2410_BANKCON6		S3C2410_MEMREG(0x1C)
+#define S3C2410_BANKCON7		S3C2410_MEMREG(0x20)
+#define S3C2410_REFRESH			S3C2410_MEMREG(0x24)
+#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x28)
+
+#define S3C2410_BWSCON_ST1		(1 << 7)
+#define S3C2410_BWSCON_ST2		(1 << 11)
+#define S3C2410_BWSCON_ST3		(1 << 15)
+#define S3C2410_BWSCON_ST4		(1 << 19)
+#define S3C2410_BWSCON_ST5		(1 << 23)
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_WS		(1 << 2)
+
+#define S3C2410_BANKCON_PMC16		(0x3)
+
+#define S3C2410_BANKCON_Tacp_SHIFT	(2)
+#define S3C2410_BANKCON_Tcah_SHIFT	(4)
+#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
+#define S3C2410_BANKCON_Tacc_SHIFT	(8)
+#define S3C2410_BANKCON_Tcos_SHIFT	(11)
+#define S3C2410_BANKCON_Tacs_SHIFT	(13)
+
+#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
+
+#define S3C2410_REFRESH_SELF		(1 << 22)
+
+#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index a3c5cb0..9ebef95 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -49,6 +49,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
+#include "common.h"
+
 /* Initial IO mappings */
 
 static struct map_desc s3c2410_iodesc[] __initdata = {
@@ -182,8 +184,8 @@
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
 
 	return device_register(&s3c2410_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c2412-power.h b/arch/arm/mach-s3c24xx/s3c2412-power.h
new file mode 100644
index 0000000..1b02c5d
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/s3c2412-power.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H
+#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__
+
+#define S3C24XX_PWRREG(x)			((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON			S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG				S3C24XX_PWRREG(0x24)
+
+#define S3C2412_INFORM0				S3C24XX_PWRREG(0x70)
+#define S3C2412_INFORM1				S3C24XX_PWRREG(0x74)
+#define S3C2412_INFORM2				S3C24XX_PWRREG(0x78)
+#define S3C2412_INFORM3				S3C24XX_PWRREG(0x7C)
+
+#define S3C2412_PWRCFG_BATF_IRQ			(1 << 0)
+#define S3C2412_PWRCFG_BATF_IGNORE		(2 << 0)
+#define S3C2412_PWRCFG_BATF_SLEEP		(3 << 0)
+#define S3C2412_PWRCFG_BATF_MASK		(3 << 0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3 << 6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ		(1 << 8)
+#define S3C2412_PWRCFG_NAND_NORST		(1 << 9)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 6c5f403..0d59215 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/s3c2412.c
- *
+/*
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -28,28 +27,31 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 
-#include <plat/cpu-freq.h>
-
+#include <mach/hardware.h>
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-#include <plat/regs-spi.h>
-#include <mach/regs-s3c2412.h>
 
-#include <plat/s3c2412.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
 #include <plat/clock.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
+#include <plat/cpu.h>
+#include <plat/cpu-freq.h>
+#include <plat/devs.h>
 #include <plat/nand-core.h>
+#include <plat/pll.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-spi.h>
+#include <plat/s3c2412.h>
+
+#include "common.h"
+#include "regs-dsc.h"
+#include "s3c2412-power.h"
+
+#define S3C2412_SWRST			(S3C24XX_VA_CLKPWR + 0x30)
+#define S3C2412_SWRST_RESET		(0x533C2412)
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -244,8 +246,8 @@
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2412_pm_syscore_ops);
-#endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
 
 	return device_register(&s3c2412_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/s3c2412.h
new file mode 100644
index 0000000..548ced4
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/s3c2412.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
+#define __ARCH_ARM_REGS_S3C24XX_S3C2412_H __FILE__
+
+#define S3C2412_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
+#define S3C2412_EBIREG(x)		(S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x)		(S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o)		(S3C2412_SSMCREG((x * 0x20) + (o)))
+
+#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
+
+#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x4)
+
+#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 77ee0b7..e30476d 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -63,6 +63,8 @@
 #include <plat/rtc-core.h>
 #include <plat/spi-core.h>
 
+#include "common.h"
+
 static struct map_desc s3c2416_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
 	IODESC_ENT(CLKPWR),
@@ -105,9 +107,9 @@
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2416_pm_syscore_ops);
-#endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 	register_syscore_ops(&s3c2416_irq_syscore_ops);
+#endif
 
 	return device_register(&s3c2416_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c
index 2b3dddb..559e394 100644
--- a/arch/arm/mach-s3c24xx/s3c2440.c
+++ b/arch/arm/mach-s3c24xx/s3c2440.c
@@ -40,6 +40,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
+#include "common.h"
+
 static struct device s3c2440_dev = {
 	.bus		= &s3c2440_subsys,
 };
@@ -57,9 +59,9 @@
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2410_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 #endif
 	register_syscore_ops(&s3c244x_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
 	/* register our system device for everything else */
 
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 22cb7c9..f732826 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -51,6 +51,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
+#include "common.h"
+
 /* S3C2442 extended clock support */
 
 static unsigned long s3c2442_camif_upll_round(struct clk *clk,
@@ -172,9 +174,9 @@
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2410_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 #endif
 	register_syscore_ops(&s3c244x_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
 	return device_register(&s3c2442_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index b0b60a1..ad2671b 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -36,7 +36,6 @@
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c244x.h>
@@ -48,6 +47,8 @@
 #include <plat/nand-core.h>
 #include <plat/watchdog-reset.h>
 
+#include "regs-dsc.h"
+
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
 	IODESC_ENT(TIMER),
diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c
index fd0ef05..67cb512 100644
--- a/arch/arm/mach-s3c24xx/simtec-audio.c
+++ b/arch/arm/mach-s3c24xx/simtec-audio.c
@@ -17,16 +17,13 @@
 #include <linux/device.h>
 #include <linux/io.h>
 
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
 #include <plat/devs.h>
 
+#include "bast.h"
 #include "simtec.h"
 
 /* platform ops for audio */
diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c24xx/simtec-nor.c
index 029744fc..8884bff 100644
--- a/arch/arm/mach-s3c24xx/simtec-nor.c
+++ b/arch/arm/mach-s3c24xx/simtec-nor.c
@@ -27,9 +27,8 @@
 #include <asm/mach/irq.h>
 
 #include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-cpld.h>
 
+#include "bast.h"
 #include "simtec.h"
 
 static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
diff --git a/arch/arm/mach-s3c24xx/simtec-pm.c b/arch/arm/mach-s3c24xx/simtec-pm.c
index 699f931..38a2f1f 100644
--- a/arch/arm/mach-s3c24xx/simtec-pm.c
+++ b/arch/arm/mach-s3c24xx/simtec-pm.c
@@ -28,12 +28,13 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 
 #include <asm/mach-types.h>
 
 #include <plat/pm.h>
 
+#include "regs-mem.h"
+
 #define COPYRIGHT ", Copyright 2005 Simtec Electronics"
 
 /* pm_simtec_init
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
index ddf7a3c..2ed2e32 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -28,15 +28,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/devs.h>
 
+#include "bast.h"
 #include "simtec.h"
 
 /* control power and monitor over-current events on various Simtec
@@ -79,7 +77,7 @@
 	int ret;
 
 	if (on) {
-		ret = request_irq(IRQ_USBOC, usb_simtec_ocirq,
+		ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
 				  IRQF_DISABLED | IRQF_TRIGGER_RISING |
 				   IRQF_TRIGGER_FALLING,
 				  "USB Over-current", info);
@@ -87,7 +85,7 @@
 			printk(KERN_ERR "failed to request usb oc irq\n");
 		}
 	} else {
-		free_irq(IRQ_USBOC, info);
+		free_irq(BAST_IRQ_USBOC, info);
 	}
 }
 
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
index 65200ae..dd47c8f 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
@@ -31,9 +31,10 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
 #include <plat/regs-serial.h>
 
+#include "regs-mem.h"
+
 	/* s3c2410_cpu_suspend
 	 *
 	 * put the cpu into sleep mode
diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S
index c5661256..7f378b6 100644
--- a/arch/arm/mach-s3c24xx/sleep.S
+++ b/arch/arm/mach-s3c24xx/sleep.S
@@ -31,7 +31,6 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
 #include <plat/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/mach-s3c24xx/vr1000.h b/arch/arm/mach-s3c24xx/vr1000.h
new file mode 100644
index 0000000..7fcd2c2f
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/vr1000.h
@@ -0,0 +1,118 @@
+
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ * Machine VR1000 - IRQ Number definitions
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_VR1000_H
+#define __MACH_S3C24XX_VR1000_H __FILE__
+
+#define VR1000_CPLD_CTRL2_RAMWEN	(0x04)	/* SRAM Write Enable */
+
+/* irq numbers to onboard peripherals */
+
+#define VR1000_IRQ_USBOC		IRQ_EINT19
+#define VR1000_IRQ_IDE0			IRQ_EINT16
+#define VR1000_IRQ_IDE1			IRQ_EINT17
+#define VR1000_IRQ_SERIAL		IRQ_EINT12
+#define VR1000_IRQ_DM9000A		IRQ_EINT10
+#define VR1000_IRQ_DM9000N		IRQ_EINT9
+#define VR1000_IRQ_SMALERT		IRQ_EINT8
+
+/* map */
+
+#define VR1000_IOADDR(x)		(S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1			VR1000_IOADDR(0x00000000) /* 0x01300000 */
+#define VR1000_PA_CTRL1			(S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2			VR1000_IOADDR(0x00100000) /* 0x01400000 */
+#define VR1000_PA_CTRL2			(S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3			VR1000_IOADDR(0x00200000) /* 0x01500000 */
+#define VR1000_PA_CTRL3			(S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4			VR1000_IOADDR(0x00300000) /* 0x01600000 */
+#define VR1000_PA_CTRL4			(S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ		(S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ		VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW		(S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW		VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK		(S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK		VR1000_IOADDR(0x00600000)
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE	(0xE0000000)
+
+#define VR1000_VA_ISAIO		(VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM	(VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI	(VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX	(VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC	(VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX	(VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET	(VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000	(VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO	(VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI	(0x02000000)
+#define VR1000_PA_IDEPRIAUX	(0x02800000)
+#define VR1000_PA_IDESEC	(0x03000000)
+#define VR1000_PA_IDESECAUX	(0x03800000)
+#define VR1000_PA_DM9000	(0x05000000)
+
+#define VR1000_PA_SERIAL	(0x11800000)
+#define VR1000_VA_SERIAL	(VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM		(S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS	VR1000_VAM_CS4
+
+#endif /* __MACH_S3C24XX_VR1000_H */
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 803711e..8499415 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -23,7 +23,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/regs-sys.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
@@ -33,6 +32,8 @@
 #include <plat/clock-clksrc.h>
 #include <plat/pll.h>
 
+#include "regs-sys.h"
+
 /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
  * ext_xtal_mux for want of an actual name from the manual.
 */
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index aef303b..0b9c0ba 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -25,10 +25,10 @@
 #include <linux/dma-mapping.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
 #include <asm/system_misc.h>
 
 #include <mach/map.h>
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index acb197c..ead5fab 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -20,8 +20,8 @@
 
 #include <mach/map.h>
 
-#include <mach/regs-sys.h>
-#include <mach/regs-syscon-power.h>
+#include "regs-sys.h"
+#include "regs-syscon-power.h"
 
 static int s3c64xx_enter_idle(struct cpuidle_device *dev,
 			      struct cpuidle_driver *drv,
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/include/mach/crag6410.h
rename to arch/arm/mach-s3c64xx/crag6410.h
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index f2a7a17..ec29b35 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -28,10 +28,10 @@
 #include <mach/map.h>
 #include <mach/irqs.h>
 
-#include <mach/regs-sys.h>
-
 #include <asm/hardware/pl080.h>
 
+#include "regs-sys.h"
+
 /* dma channel state information */
 
 struct s3c64xx_dmac {
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
index bcce68a..6a112789 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
@@ -15,6 +15,5 @@
 #ifndef __ASM_ARCH_REGS_IRQ_H
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
-#include <asm/hardware/vic.h>
 
 #endif /* __ASM_ARCH_6400_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
deleted file mode 100644
index b91e020..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX system register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_SYS_H
-#define __PLAT_REGS_SYS_H __FILE__
-
-#define S3C_SYSREG(x)		(S3C_VA_SYS + (x))
-
-#define S3C64XX_AHB_CON0	S3C_SYSREG(0x100)
-#define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
-#define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
-
-#define S3C64XX_SDMA_SEL	S3C_SYSREG(0x110)
-
-#define S3C64XX_OTHERS		S3C_SYSREG(0x900)
-
-#define S3C64XX_OTHERS_USBMASK	(1 << 16)
-#define S3C64XX_OTHERS_SYNCMUXSEL	(1 << 6)
-
-#endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
index ebe18a9..db9c1b1 100644
--- a/arch/arm/mach-s3c64xx/include/mach/tick.h
+++ b/arch/arm/mach-s3c64xx/include/mach/tick.h
@@ -15,6 +15,8 @@
 #ifndef __ASM_ARCH_TICK_H
 #define __ASM_ARCH_TICK_H __FILE__
 
+#include <linux/irqchip/arm-vic.h>
+
 /* note, the timer interrutps turn up in 2 places, the vic and then
  * the timer block. We take the VIC as the base at the moment.
  */
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 99e82ac..728eef3 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -31,7 +31,6 @@
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -50,9 +49,9 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
 
 #include "common.h"
+#include "regs-modem.h"
 
 /* DM9000 */
 #define ANW6410_PA_DM9000	(0x18000000)
@@ -230,10 +229,9 @@
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= anw6410_map_io,
 	.init_machine	= anw6410_machine_init,
 	.init_late	= s3c64xx_init_late,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 755c0bb..bf3d1c0 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,7 +29,7 @@
 
 #include <linux/platform_data/spi-s3c64xx.h>
 
-#include <mach/crag6410.h>
+#include "crag6410.h"
 
 static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
 	.line = S3C64XX_GPC(3),
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index bf6311a..1acf02b 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -42,7 +42,6 @@
 
 #include <sound/wm1250-ev1.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -50,12 +49,7 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/crag6410.h>
-
-#include <mach/regs-gpio-memport.h>
 
 #include <plat/regs-serial.h>
 #include <plat/fb.h>
@@ -72,6 +66,10 @@
 #include <plat/pm.h>
 
 #include "common.h"
+#include "crag6410.h"
+#include "regs-gpio-memport.h"
+#include "regs-modem.h"
+#include "regs-sys.h"
 
 /* serial port setup */
 
@@ -867,10 +865,9 @@
 	/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= crag6410_map_io,
 	.init_machine	= crag6410_machine_init,
 	.init_late	= s3c64xx_init_late,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 2b14489..7212eb9 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -30,7 +30,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -273,10 +272,9 @@
 	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= hmt_map_io,
 	.init_machine	= hmt_machine_init,
 	.init_late	= s3c64xx_init_late,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 07c349c..4b41fcd 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -24,15 +24,12 @@
 #include <linux/serial_core.h>
 #include <linux/types.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-srom.h>
 
 #include <plat/adc.h>
 #include <plat/cpu.h>
@@ -46,6 +43,8 @@
 #include <video/samsung_fimd.h>
 
 #include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
 
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -352,10 +351,9 @@
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= mini6410_map_io,
 	.init_machine	= mini6410_machine_init,
 	.init_late	= s3c64xx_init_late,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index e5f9a79..8d3cedd 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -26,7 +26,6 @@
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -101,10 +100,9 @@
 	/* Maintainer: Samsung Electronics */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= ncp_map_io,
 	.init_machine	= ncp_machine_init,
 	.init_late	= s3c64xx_init_late,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 7476f7c..fa12bd2 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -25,15 +25,12 @@
 #include <linux/serial_core.h>
 #include <linux/types.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-srom.h>
 
 #include <plat/adc.h>
 #include <plat/cpu.h>
@@ -47,6 +44,8 @@
 #include <video/samsung_fimd.h>
 
 #include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
 
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -331,10 +330,9 @@
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= real6410_map_io,
 	.init_machine	= real6410_machine_init,
 	.init_late	= s3c64xx_init_late,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index c6d7390..fc3e9b3 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -25,7 +25,6 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
@@ -41,6 +40,7 @@
 #include <video/platform_lcd.h>
 
 #include "common.h"
+#include "regs-modem.h"
 
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 96d6da2..ca2afcf 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -17,7 +17,6 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -153,10 +152,9 @@
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq5_machine_init,
 	.init_late	= s3c64xx_init_late,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 7d1167b..37bb0c6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -17,7 +17,6 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -169,10 +168,9 @@
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq7_machine_init,
 	.init_late	= s3c64xx_init_late,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index a928fae..a392869 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -22,7 +22,6 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -90,10 +89,9 @@
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6400_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6400_map_io,
 	.init_machine	= smdk6400_machine_init,
 	.init_late	= s3c64xx_init_late,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 574a9ee..ba7544e 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -45,7 +45,6 @@
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -57,10 +56,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <mach/regs-modem.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-sys.h>
-#include <mach/regs-srom.h>
 #include <linux/platform_data/ata-samsung_cf.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
@@ -75,6 +71,9 @@
 #include <plat/backlight.h>
 
 #include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
+#include "regs-sys.h"
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -700,10 +699,9 @@
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6410_map_io,
 	.init_machine	= smdk6410_machine_init,
 	.init_late	= s3c64xx_init_late,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index ce84990..6a1f91f 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -26,12 +26,13 @@
 #include <plat/pm.h>
 #include <plat/wakeup-mask.h>
 
-#include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-syscon-power.h>
-#include <mach/regs-gpio-memport.h>
-#include <mach/regs-modem.h>
+
+#include "regs-gpio-memport.h"
+#include "regs-modem.h"
+#include "regs-sys.h"
+#include "regs-syscon-power.h"
 
 struct s3c64xx_pm_domain {
 	char *const name;
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/regs-gpio-memport.h
similarity index 71%
rename from arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
rename to arch/arm/mach-s3c64xx/regs-gpio-memport.h
index 82342f6..b927593 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
+++ b/arch/arm/mach-s3c64xx/regs-gpio-memport.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
@@ -8,8 +7,8 @@
  * S3C64XX - GPIO memory port register definitions
  */
 
-#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H
-#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_GPIO_MEMPORT_H
+#define __MACH_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
 
 #define S3C64XX_MEM0CONSTOP	S3C64XX_GPIOREG(0x1B0)
 #define S3C64XX_MEM1CONSTOP	S3C64XX_GPIOREG(0x1B4)
@@ -21,5 +20,5 @@
 #define S3C64XX_MEM0DRVCON	S3C64XX_GPIOREG(0x1D0)
 #define S3C64XX_MEM1DRVCON	S3C64XX_GPIOREG(0x1D4)
 
-#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */
+#endif /* __MACH_S3C64XX_REGS_GPIO_MEMPORT_H */
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-modem.h b/arch/arm/mach-s3c64xx/regs-modem.h
similarity index 78%
rename from arch/arm/mach-s3c64xx/include/mach/regs-modem.h
rename to arch/arm/mach-s3c64xx/regs-modem.h
index 49f7759..073cdd3 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
+++ b/arch/arm/mach-s3c64xx/regs-modem.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
@@ -12,10 +11,10 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __PLAT_S3C64XX_REGS_MODEM_H
-#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_MODEM_H
+#define __MACH_S3C64XX_REGS_MODEM_H __FILE__
 
-#define S3C64XX_MODEMREG(x)	(S3C64XX_VA_MODEM + (x))
+#define S3C64XX_MODEMREG(x)			(S3C64XX_VA_MODEM + (x))
 
 #define S3C64XX_MODEM_INT2AP			S3C64XX_MODEMREG(0x0)
 #define S3C64XX_MODEM_INT2MODEM			S3C64XX_MODEMREG(0x4)
@@ -28,4 +27,4 @@
 #define MIFPCON_INT2M_LEVEL			(1 << 4)
 #define MIFPCON_LCD_BYPASS			(1 << 3)
 
-#endif /* __PLAT_S3C64XX_REGS_MODEM_H */
+#endif /* __MACH_S3C64XX_REGS_MODEM_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/regs-srom.h
similarity index 89%
rename from arch/arm/mach-s3c64xx/include/mach/regs-srom.h
rename to arch/arm/mach-s3c64xx/regs-srom.h
index 756731b..d56f338 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
+++ b/arch/arm/mach-s3c64xx/regs-srom.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
- *
+/*
  * Copyright 2009 Andy Green <andy@warmcat.com>
  *
  * S3C64XX SROM definitions
@@ -9,8 +8,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __PLAT_REGS_SROM_H
-#define __PLAT_REGS_SROM_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_SROM_H
+#define __MACH_S3C64XX_REGS_SROM_H __FILE__
 
 #define S3C64XX_SROMREG(x)	(S3C_VA_MEM + (x))
 
@@ -29,7 +28,7 @@
 #define S3C64XX_SROM_BW__DATAWIDTH__SHIFT	0
 #define S3C64XX_SROM_BW__WAITENABLE__SHIFT	2
 #define S3C64XX_SROM_BW__BYTEENABLE__SHIFT	3
-#define S3C64XX_SROM_BW__CS_MASK 0xf
+#define S3C64XX_SROM_BW__CS_MASK		0xf
 
 #define S3C64XX_SROM_BW__NCS0__SHIFT	0
 #define S3C64XX_SROM_BW__NCS1__SHIFT	4
@@ -56,4 +55,4 @@
 #define S3C64XX_SROM_BCX__TACS__SHIFT	28
 #define S3C64XX_SROM_BCX__TACS__MASK	0xf
 
-#endif /* _PLAT_REGS_SROM_H */
+#endif /* __MACH_S3C64XX_REGS_SROM_H */
diff --git a/arch/arm/mach-s3c64xx/regs-sys.h b/arch/arm/mach-s3c64xx/regs-sys.h
new file mode 100644
index 0000000..8c411fb
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/regs-sys.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX system register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C64XX_REGS_SYS_H
+#define __MACH_S3C64XX_REGS_SYS_H __FILE__
+
+#define S3C_SYSREG(x)			(S3C_VA_SYS + (x))
+
+#define S3C64XX_AHB_CON0		S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1		S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2		S3C_SYSREG(0x108)
+
+#define S3C64XX_SDMA_SEL		S3C_SYSREG(0x110)
+
+#define S3C64XX_OTHERS			S3C_SYSREG(0x900)
+
+#define S3C64XX_OTHERS_USBMASK		(1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL	(1 << 6)
+
+#endif /* __MACH_S3C64XX_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h b/arch/arm/mach-s3c64xx/regs-syscon-power.h
similarity index 94%
rename from arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
rename to arch/arm/mach-s3c64xx/regs-syscon-power.h
index 270d96a..6e16b34 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
+++ b/arch/arm/mach-s3c64xx/regs-syscon-power.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
@@ -12,8 +11,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H
-#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_SYSCON_POWER_H
+#define __MACH_S3C64XX_REGS_SYSCON_POWER_H __FILE__
 
 #define S3C64XX_PWR_CFG				S3C_SYSREG(0x804)
 
@@ -113,4 +112,4 @@
 #define S3C64XX_INFORM2				S3C_SYSREG(0xA08)
 #define S3C64XX_INFORM3				S3C_SYSREG(0xA0C)
 
-#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */
+#endif /* __MACH_S3C64XX_REGS_SYSCON_POWER_H */
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
index f6757e0..c8174d9 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -15,11 +15,12 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <mach/map.h>
-#include <mach/regs-sys.h>
 #include <plat/cpu.h>
 #include <plat/regs-usb-hsotg-phy.h>
 #include <plat/usb-phy.h>
 
+#include "regs-sys.h"
+
 static int s3c_usb_otgphy_init(struct platform_device *pdev)
 {
 	struct clk *xusbxti;
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 5112371..35378152 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -23,7 +23,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/s5p64x0-clock.h>
 
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
@@ -32,6 +31,7 @@
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
 
+#include "clock.h"
 #include "common.h"
 
 static u32 epll_div[][5] = {
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index 154dea7..af384dd 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -23,7 +23,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/s5p64x0-clock.h>
 
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
@@ -32,6 +31,7 @@
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
 
+#include "clock.h"
 #include "common.h"
 
 static struct clksrc_clk clk_mout_dpll = {
diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/clock.h
similarity index 87%
rename from arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
rename to arch/arm/mach-s5p64x0/clock.h
index 0ef47d1..28b8e3c 100644
--- a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+++ b/arch/arm/mach-s5p64x0/clock.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
@@ -10,8 +9,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
+#ifndef __MACH_S5P64X0_CLOCK_H
+#define __MACH_S5P64X0_CLOCK_H __FILE__
 
 #include <linux/clk.h>
 
@@ -36,4 +35,4 @@
 
 extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
 
-#endif /* __ASM_ARCH_CLOCK_H */
+#endif /* __MACH_S5P64X0_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
deleted file mode 100644
index 700dac6..0000000
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/gpiolib.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/*
- * S5P6440 GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	6	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * F	2	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * N	16	2Bit	No	IRQ_EINT
- * P	8	2Bit	Yes	8
- * R	15	4Bit[2]	Yes	8
- *
- * S5P6450 GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	6	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	8	4Bit	Yes	None
- * F	2	2Bit	Yes	None
- * G	14	4Bit[2]	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	5	4Bit	Yes	None
- * N	16	2Bit	No	IRQ_EINT
- * P	11	2Bit	Yes	8
- * Q	14	2Bit	Yes	None
- * R	15	4Bit[2]	Yes	None
- * S	8	2Bit	Yes	None
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
-					     unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long flags;
-
-	switch (offset) {
-	case 6:
-		offset += 1;
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		regcon -= 4;
-		break;
-	default:
-		offset -= 7;
-		break;
-	}
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	s3c_gpio_unlock(ourchip, flags);
-
-	return 0;
-}
-
-static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
-					      unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-	unsigned long flags;
-	unsigned con_offset  = offset;
-
-	switch (con_offset) {
-	case 6:
-		con_offset += 1;
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		regcon -= 4;
-		break;
-	default:
-		con_offset -= 7;
-		break;
-	}
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(con_offset));
-	con |= 0x1 << con_4bit_shift(con_offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	s3c_gpio_unlock(ourchip, flags);
-
-	return 0;
-}
-
-int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
-				   unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift;
-	u32 con;
-
-	switch (off) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		shift = (off & 7) * 4;
-		reg -= 4;
-		break;
-	case 6:
-		shift = ((off + 1) & 7) * 4;
-		reg -= 4;
-	default:
-		shift = ((off + 1) & 7) * 4;
-		break;
-	}
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
-	{
-		.cfg_eint	= 0,
-	}, {
-		.cfg_eint	= 7,
-	}, {
-		.cfg_eint	= 3,
-		.set_config	= s5p64x0_gpio_setcfg_4bit_rbank,
-	}, {
-		.cfg_eint	= 0,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	}, {
-		.cfg_eint	= 2,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	}, {
-		.cfg_eint	= 3,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
-	{
-		.base	= S5P64X0_GPA_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPA(0),
-			.ngpio	= S5P6440_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S5P64X0_GPB_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPB(0),
-			.ngpio	= S5P6440_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S5P64X0_GPC_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPC(0),
-			.ngpio	= S5P6440_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5P64X0_GPG_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPG(0),
-			.ngpio	= S5P6440_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
-	{
-		.base	= S5P64X0_GPH_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPH(0),
-			.ngpio	= S5P6440_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
-	{
-		.base	= S5P64X0_GPR_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[2],
-		.chip	= {
-			.base	= S5P6440_GPR(0),
-			.ngpio	= S5P6440_GPIO_R_NR,
-			.label	= "GPR",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
-	{
-		.base	= S5P64X0_GPF_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6440_GPF(0),
-			.ngpio	= S5P6440_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S5P64X0_GPI_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6440_GPI(0),
-			.ngpio	= S5P6440_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5P64X0_GPJ_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6440_GPJ(0),
-			.ngpio	= S5P6440_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S5P64X0_GPN_BASE,
-		.config	= &s5p64x0_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6440_GPN(0),
-			.ngpio	= S5P6440_GPIO_N_NR,
-			.label	= "GPN",
-		},
-	}, {
-		.base	= S5P64X0_GPP_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6440_GPP(0),
-			.ngpio	= S5P6440_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit[] = {
-	{
-		.base	= S5P64X0_GPA_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPA(0),
-			.ngpio	= S5P6450_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S5P64X0_GPB_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPB(0),
-			.ngpio	= S5P6450_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S5P64X0_GPC_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPC(0),
-			.ngpio	= S5P6450_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5P6450_GPD_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPD(0),
-			.ngpio	= S5P6450_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S5P6450_GPK_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPK(0),
-			.ngpio	= S5P6450_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = {
-	{
-		.base	= S5P64X0_GPG_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPG(0),
-			.ngpio	= S5P6450_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S5P64X0_GPH_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPH(0),
-			.ngpio	= S5P6450_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = {
-	{
-		.base	= S5P64X0_GPR_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[2],
-		.chip	= {
-			.base	= S5P6450_GPR(0),
-			.ngpio	= S5P6450_GPIO_R_NR,
-			.label	= "GPR",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_2bit[] = {
-	{
-		.base	= S5P64X0_GPF_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPF(0),
-			.ngpio	= S5P6450_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S5P64X0_GPI_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6450_GPI(0),
-			.ngpio	= S5P6450_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5P64X0_GPJ_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6450_GPJ(0),
-			.ngpio	= S5P6450_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S5P64X0_GPN_BASE,
-		.config	= &s5p64x0_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6450_GPN(0),
-			.ngpio	= S5P6450_GPIO_N_NR,
-			.label	= "GPN",
-		},
-	}, {
-		.base	= S5P64X0_GPP_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPP(0),
-			.ngpio	= S5P6450_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S5P6450_GPQ_BASE,
-		.config	= &s5p64x0_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6450_GPQ(0),
-			.ngpio	= S5P6450_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	}, {
-		.base	= S5P6450_GPS_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPS(0),
-			.ngpio	= S5P6450_GPIO_S_NR,
-			.label	= "GPS",
-		},
-	},
-};
-
-void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chipcfg++) {
-		if (!chipcfg->set_config)
-			chipcfg->set_config	= s3c_gpio_setcfg_s3c64xx_4bit;
-		if (!chipcfg->get_config)
-			chipcfg->get_config	= s3c_gpio_getcfg_s3c64xx_4bit;
-		if (!chipcfg->set_pull)
-			chipcfg->set_pull	= s3c_gpio_setpull_updown;
-		if (!chipcfg->get_pull)
-			chipcfg->get_pull	= s3c_gpio_getpull_updown;
-	}
-}
-
-static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
-						int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
-		chip->chip.direction_output =
-					s5p64x0_gpiolib_rbank_4bit2_output;
-		s3c_gpiolib_add(chip);
-	}
-}
-
-static int __init s5p64x0_gpiolib_init(void)
-{
-	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
-				ARRAY_SIZE(s5p64x0_gpio_cfgs));
-
-	if (soc_is_s5p6450()) {
-		samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
-					ARRAY_SIZE(s5p6450_gpio_2bit));
-
-		samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit,
-					ARRAY_SIZE(s5p6450_gpio_4bit));
-
-		samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2,
-					ARRAY_SIZE(s5p6450_gpio_4bit2));
-
-		s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2,
-					ARRAY_SIZE(s5p6450_gpio_rbank_4bit2));
-	} else {
-		samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit,
-					ARRAY_SIZE(s5p6440_gpio_2bit));
-
-		samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
-					ARRAY_SIZE(s5p6440_gpio_4bit));
-
-		samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
-					ARRAY_SIZE(s5p6440_gpio_4bit2));
-
-		s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
-					ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
-	}
-
-	return 0;
-}
-core_initcall(s5p64x0_gpiolib_init);
diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/i2c.h
similarity index 91%
rename from arch/arm/mach-s5p64x0/include/mach/i2c.h
rename to arch/arm/mach-s5p64x0/i2c.h
index 887d252..1e5bb4e 100644
--- a/arch/arm/mach-s5p64x0/include/mach/i2c.h
+++ b/arch/arm/mach-s5p64x0/i2c.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
index 4aaebda..d60397d 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_REGS_IRQ_H
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
-#include <asm/hardware/vic.h>
 #include <mach/map.h>
 
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h
deleted file mode 100644
index 00aa7f1..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/tick.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S5P64X0 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
index 1608faf..19e0d64 100644
--- a/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
@@ -116,33 +116,6 @@
 		*((volatile unsigned int __force *)(ad)) = (d); \
 	} while (0)
 
-/*
- * CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
- */
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
 
 #ifdef CONFIG_S3C_BOOT_ERROR_RESET
 
@@ -192,7 +165,6 @@
 	 */
 
 	arch_detect_cpu();
-	arch_decomp_wdog_start();
 
 	/*
 	 * Enable the UART FIFOs if they where not enabled and our
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 1af8235..e23723a 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -29,7 +29,6 @@
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -38,7 +37,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/i2c.h>
 #include <mach/regs-gpio.h>
 
 #include <plat/regs-serial.h>
@@ -56,6 +54,7 @@
 #include <plat/sdhci.h>
 
 #include "common.h"
+#include "i2c.h"
 
 #define SMDK6440_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -272,9 +271,8 @@
 	.atag_offset	= 0x100,
 
 	.init_irq	= s5p6440_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6440_map_io,
 	.init_machine	= smdk6440_machine_init,
-	.timer		= &s5p_timer,
+	.init_time	= s5p_timer_init,
 	.restart	= s5p64x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 62526cc..ca10963 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -29,7 +29,6 @@
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -38,7 +37,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/i2c.h>
 #include <mach/regs-gpio.h>
 
 #include <plat/regs-serial.h>
@@ -56,6 +54,7 @@
 #include <plat/sdhci.h>
 
 #include "common.h"
+#include "i2c.h"
 
 #define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -291,9 +290,8 @@
 	.atag_offset	= 0x100,
 
 	.init_irq	= s5p6450_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6450_map_io,
 	.init_machine	= smdk6450_machine_init,
-	.timer		= &s5p_timer,
+	.init_time	= s5p_timer_init,
 	.restart	= s5p64x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
index a32edc5..569b76a 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c0.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -21,7 +21,7 @@
 #include <plat/gpio-cfg.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <mach/i2c.h>
+#include "i2c.h"
 
 void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
 {
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
index ca2c5c7..867374e 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c1.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -21,7 +21,7 @@
 #include <plat/gpio-cfg.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <mach/i2c.h>
+#include "i2c.h"
 
 void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
 {
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
index 4d9036d..7616278 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -14,6 +14,5 @@
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
 #include <mach/map.h>
-#include <asm/hardware/vic.h>
 
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
index 20f6873..0af8e41 100644
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -15,6 +15,8 @@
 #ifndef __ASM_ARCH_TICK_H
 #define __ASM_ARCH_TICK_H __FILE__
 
+#include <linux/irqchip/arm-vic.h>
+
 /* note, the timer interrutps turn up in 2 places, the vic and then
  * the timer block. We take the VIC as the base at the moment.
  */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 9abe95e..185a195 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -25,7 +25,6 @@
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -254,9 +253,8 @@
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pc100_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= smdkc100_map_io,
 	.init_machine	= smdkc100_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s5pc100_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index addfb16..2d67361 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -18,7 +18,8 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
-#include <mach/regs-audss.h>
+
+#define S5PV210_AUDSS_INT_MEM	(0xC0000000)
 
 static int s5pv210_cfg_i2s(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-audss.h b/arch/arm/mach-s5pv210/include/mach/regs-audss.h
deleted file mode 100644
index eacc1f7..0000000
--- a/arch/arm/mach-s5pv210/include/mach/regs-audss.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5pv210/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- *		http://www.samsung.com
- *
- * S5PV210 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define S5PV210_AUDSS_INT_MEM	(0xC0000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
index 5c3b104..d8bc1e6 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_REGS_IRQ_H
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
-#include <asm/hardware/vic.h>
 #include <mach/map.h>
 
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
deleted file mode 100644
index cccb1ed..0000000
--- a/arch/arm/mach-s5pv210/include/mach/regs-sys.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* arch/arm/mach-s5pv210/include/mach/regs-sys.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - System registers definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PV210_USB_PHY_CON	(S3C_VA_SYS + 0xE80C)
-#define S5PV210_USB_PHY0_EN	(1 << 0)
-#define S5PV210_USB_PHY1_EN	(1 << 1)
diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h
deleted file mode 100644
index 7993b36..0000000
--- a/arch/arm/mach-s5pv210/include/mach/tick.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/tick.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * S5PV210 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index ee9fa5c..11900a8 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -22,7 +22,6 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -685,9 +684,8 @@
 	   Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= aquila_map_io,
 	.init_machine	= aquila_machine_init,
-	.timer		= &s5p_timer,
+	.init_time	= s5p_timer_init,
 	.restart	= s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index c72b310..5704815 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -29,7 +29,6 @@
 #include <linux/interrupt.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -972,10 +971,9 @@
 	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= goni_map_io,
 	.init_machine	= goni_machine_init,
-	.timer		= &s5p_timer,
+	.init_time	= s5p_timer_init,
 	.reserve	= &goni_reserve,
 	.restart	= s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index f1f3bd3..28bd024 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -15,7 +15,6 @@
 #include <linux/i2c.h>
 #include <linux/device.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -152,10 +151,9 @@
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= smdkc110_map_io,
 	.init_machine	= smdkc110_machine_init,
-	.timer		= &s5p_timer,
+	.init_time	= s5p_timer_init,
 	.restart	= s5pv210_restart,
 	.reserve	= &smdkc110_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 6bc8404..3c73f36 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -21,7 +21,6 @@
 #include <linux/pwm_backlight.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -328,10 +327,9 @@
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= smdkv210_map_io,
 	.init_machine	= smdkv210_machine_init,
-	.timer		= &s5p_timer,
+	.init_time	= s5p_timer_init,
 	.restart	= s5pv210_restart,
 	.reserve	= &smdkv210_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 18785cb..2d4c553 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -129,9 +128,8 @@
 	/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.map_io		= torbreck_map_io,
 	.init_machine	= torbreck_machine_init,
-	.timer		= &s5p_timer,
+	.init_time	= s5p_timer_init,
 	.restart	= s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c
index be39cf4..356a090 100644
--- a/arch/arm/mach-s5pv210/setup-usb-phy.c
+++ b/arch/arm/mach-s5pv210/setup-usb-phy.c
@@ -12,12 +12,17 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+
 #include <mach/map.h>
-#include <mach/regs-sys.h>
+
 #include <plat/cpu.h>
 #include <plat/regs-usb-hsotg-phy.h>
 #include <plat/usb-phy.h>
 
+#define S5PV210_USB_PHY_CON	(S3C_VA_SYS + 0xE80C)
+#define S5PV210_USB_PHY0_EN	(1 << 0)
+#define S5PV210_USB_PHY1_EN	(1 << 1)
+
 static int s5pv210_usb_otgphy_init(struct platform_device *pdev)
 {
 	struct clk *xusbxti;
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 4424973..e838ba2 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -622,7 +622,7 @@
 	.map_io		= assabet_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine	= assabet_init,
 	.init_late	= sa11x0_init_late,
 #ifdef CONFIG_SA1111
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b2dadf3..63361b6 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -336,7 +336,7 @@
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.init_late	= sa11x0_init_late,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 #ifdef CONFIG_SA1111
 	.dma_zone_size	= SZ_1M,
 #endif
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 304bca4..2d25ece 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -174,7 +174,7 @@
 	.map_io		= cerf_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= cerf_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine	= cerf_init,
 	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 45f424f..612a456 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -399,7 +399,7 @@
 	.map_io		= collie_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine	= collie_init,
 	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index a5b7c13..2abc6a1 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -4,9 +4,7 @@
  * Author: Nicolas Pitre
  */
 
-struct sys_timer;
-
-extern struct sys_timer sa1100_timer;
+extern void sa1100_timer_init(void);
 extern void __init sa1100_map_io(void);
 extern void __init sa1100_init_irq(void);
 extern void __init sa1100_init_gpio(void);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index e1571ea..b8f2b15 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -108,7 +108,7 @@
 	.map_io		= h3100_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine	= h3100_mach_init,
 	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index ba7a290..b8dc5bd 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -158,7 +158,7 @@
 	.map_io		= h3600_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine	= h3600_mach_init,
 	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index d005939..643d5f2 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -229,7 +229,7 @@
 	.map_io		= hackkit_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine	= hackkit_init,
 	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
index 5cf71da..73093dc 100644
--- a/arch/arm/mach-sa1100/include/mach/uncompress.h
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -49,4 +49,3 @@
  * Nothing to do for these
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 35cfc42..c0b1f5b 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -346,7 +346,7 @@
 	.map_io		= jornada720_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine	= jornada720_mach_init,
 	.init_late	= sa11x0_init_late,
 #ifdef CONFIG_SA1111
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index bca7e60..51b0eb5 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -171,6 +171,6 @@
 	.init_irq	= sa1100_init_irq,
 	.init_machine	= lart_init,
 	.init_late	= sa11x0_init_late,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 102e08f..f1cb378 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -110,7 +110,7 @@
 	.map_io		= nanoengine_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine	= nanoengine_init,
 	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index c51bb63..0912618 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -133,7 +133,7 @@
 	.map_io		= pleb_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine   = pleb_init,
 	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 6460d25..c8866bc 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -102,7 +102,7 @@
 	.map_io		= shannon_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.init_machine	= shannon_init,
 	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 6d65f65..bcbc945 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -396,6 +396,6 @@
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.init_late	= sa11x0_init_late,
-	.timer		= &sa1100_timer,
+	.init_time	= sa1100_timer_init,
 	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 80702c9..a59a13a 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -69,46 +69,10 @@
 	}
 }
 
-static struct clock_event_device ckevt_sa1100_osmr0 = {
-	.name		= "osmr0",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= sa1100_osmr0_set_next_event,
-	.set_mode	= sa1100_osmr0_set_mode,
-};
-
-static struct irqaction sa1100_timer_irq = {
-	.name		= "ost0",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= sa1100_ost0_interrupt,
-	.dev_id		= &ckevt_sa1100_osmr0,
-};
-
-static void __init sa1100_timer_init(void)
-{
-	writel_relaxed(0, OIER);
-	writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
-
-	setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
-
-	clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4);
-	ckevt_sa1100_osmr0.max_delta_ns =
-		clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0);
-	ckevt_sa1100_osmr0.min_delta_ns =
-		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1;
-	ckevt_sa1100_osmr0.cpumask = cpumask_of(0);
-
-	setup_irq(IRQ_OST0, &sa1100_timer_irq);
-
-	clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
-		clocksource_mmio_readl_up);
-	clockevents_register_device(&ckevt_sa1100_osmr0);
-}
-
 #ifdef CONFIG_PM
 unsigned long osmr[4], oier;
 
-static void sa1100_timer_suspend(void)
+static void sa1100_timer_suspend(struct clock_event_device *cedev)
 {
 	osmr[0] = readl_relaxed(OSMR0);
 	osmr[1] = readl_relaxed(OSMR1);
@@ -117,7 +81,7 @@
 	oier = readl_relaxed(OIER);
 }
 
-static void sa1100_timer_resume(void)
+static void sa1100_timer_resume(struct clock_event_device *cedev)
 {
 	writel_relaxed(0x0f, OSSR);
 	writel_relaxed(osmr[0], OSMR0);
@@ -136,8 +100,36 @@
 #define sa1100_timer_resume NULL
 #endif
 
-struct sys_timer sa1100_timer = {
-	.init		= sa1100_timer_init,
+static struct clock_event_device ckevt_sa1100_osmr0 = {
+	.name		= "osmr0",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 200,
+	.set_next_event	= sa1100_osmr0_set_next_event,
+	.set_mode	= sa1100_osmr0_set_mode,
 	.suspend	= sa1100_timer_suspend,
 	.resume		= sa1100_timer_resume,
 };
+
+static struct irqaction sa1100_timer_irq = {
+	.name		= "ost0",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= sa1100_ost0_interrupt,
+	.dev_id		= &ckevt_sa1100_osmr0,
+};
+
+void __init sa1100_timer_init(void)
+{
+	writel_relaxed(0, OIER);
+	writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
+
+	setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
+
+	ckevt_sa1100_osmr0.cpumask = cpumask_of(0);
+
+	setup_irq(IRQ_OST0, &sa1100_timer_irq);
+
+	clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
+		clocksource_mmio_readl_up);
+	clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400,
+					MIN_OSCR_DELTA * 2, 0x7fffffff);
+}
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 9ad2e97..b63dec8 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -128,10 +128,6 @@
 	setup_irq(IRQ_TIMER, &shark_timer_irq);
 }
 
-static struct sys_timer shark_timer = {
-	.init		= shark_timer_init,
-};
-
 static void shark_init_early(void)
 {
 	disable_hlt();
@@ -142,7 +138,7 @@
 	.atag_offset	= 0x3000,
 	.init_early	= shark_init_early,
 	.init_irq	= shark_init_irq,
-	.timer		= &shark_timer,
+	.init_time	= shark_timer_init,
 	.dma_zone_size	= SZ_4M,
 	.restart	= shark_restart,
 MACHINE_END
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
index 22ccab4..a168435 100644
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -48,4 +48,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 032d108..705bc63 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -40,6 +40,7 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
+#include <linux/irqchip/arm-gic.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -49,7 +50,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
 
@@ -668,8 +668,7 @@
 	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= ag5evm_init,
 	.init_late	= shmobile_init_late,
-	.timer		= &shmobile_timer,
+	.init_time	= sh73a0_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 08294fa..2928cd6 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1344,5 +1344,5 @@
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= ap4evb_init,
 	.init_late	= sh7372_pm_init_late,
-	.timer		= &shmobile_timer,
+	.init_time	= sh7372_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 0679ca6..6bcf3cb 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1192,9 +1192,6 @@
 static void __init eva_add_early_devices(void)
 {
 	r8a7740_add_early_devices();
-
-	/* override timer setup with board-specific code */
-	shmobile_timer.init = eva_earlytimer_init;
 }
 
 #define RESCNT2 IOMEM(0xe6188020)
@@ -1216,7 +1213,7 @@
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= eva_init,
 	.init_late	= shmobile_init_late,
-	.timer		= &shmobile_timer,
+	.init_time	= eva_earlytimer_init,
 	.dt_compat	= eva_boards_compat_dt,
 	.restart	= eva_restart,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index cb8c994..331b7ce 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -499,9 +499,6 @@
 static void __init bonito_add_early_devices(void)
 {
 	r8a7740_add_early_devices();
-
-	/* override timer setup with board-specific code */
-	shmobile_timer.init = bonito_earlytimer_init;
 }
 
 MACHINE_START(BONITO, "bonito")
@@ -511,5 +508,5 @@
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= bonito_init,
 	.init_late	= shmobile_init_late,
-	.timer		= &shmobile_timer,
+	.init_time	= bonito_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index bf88f9a..d759a9c 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -35,6 +35,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/leds-renesas-tpu.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
@@ -47,7 +48,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
 
@@ -550,8 +550,7 @@
 	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= kota2_init,
 	.init_late	= shmobile_init_late,
-	.timer		= &shmobile_timer,
+	.init_time	= sh73a0_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index b52bc0d..c254782 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -28,7 +28,6 @@
 #include <mach/emev2.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
@@ -89,9 +88,8 @@
 	.init_early	= emev2_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= emev2_init_irq,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= kzm9d_add_standard_devices,
 	.init_late	= shmobile_init_late,
-	.timer		= &shmobile_timer,
+	.init_time	= shmobile_timer_init,
 	.dt_compat	= kzm9d_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index f41b71e..5394d80 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -25,6 +25,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/input.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
@@ -42,7 +43,6 @@
 #include <mach/sh73a0.h>
 #include <mach/common.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <video/sh_mobile_lcdc.h>
@@ -792,10 +792,9 @@
 	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= kzm_init,
 	.init_late	= shmobile_init_late,
-	.timer		= &shmobile_timer,
+	.init_time	= sh73a0_earlytimer_init,
 	.restart	= kzm9g_restart,
 	.dt_compat	= kzm9g_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 3fd716d..e2fafca 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1589,6 +1589,6 @@
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= mackerel_init,
 	.init_late	= sh7372_pm_init_late,
-	.timer		= &shmobile_timer,
+	.init_time	= sh7372_earlytimer_init,
 	.dt_compat  = mackerel_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 449f928..cdcb799 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -44,7 +44,6 @@
 #include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/traps.h>
 
 /* Fixed 3.3V regulator to be used by SDHI0 */
@@ -382,8 +381,7 @@
 	.init_early	= r8a7779_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= marzen_init,
 	.init_late	= marzen_init_late,
-	.timer		= &shmobile_timer,
+	.init_time	= r8a7779_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index dfeca79..a57439e 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -2,7 +2,7 @@
 #define __ARCH_MACH_COMMON_H
 
 extern void shmobile_earlytimer_init(void);
-extern struct sys_timer shmobile_timer;
+extern void shmobile_timer_init(void);
 extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 			 unsigned int mult, unsigned int div);
 struct twd_local_timer;
@@ -20,6 +20,7 @@
 
 extern void sh7372_init_irq(void);
 extern void sh7372_map_io(void);
+extern void sh7372_earlytimer_init(void);
 extern void sh7372_add_early_devices(void);
 extern void sh7372_add_standard_devices(void);
 extern void sh7372_clock_init(void);
@@ -32,6 +33,7 @@
 
 extern void sh73a0_init_irq(void);
 extern void sh73a0_map_io(void);
+extern void sh73a0_earlytimer_init(void);
 extern void sh73a0_add_early_devices(void);
 extern void sh73a0_add_standard_devices(void);
 extern void sh73a0_clock_init(void);
@@ -50,6 +52,7 @@
 
 extern void r8a7779_init_irq(void);
 extern void r8a7779_map_io(void);
+extern void r8a7779_earlytimer_init(void);
 extern void r8a7779_add_early_devices(void);
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_clock_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h
index 0bd7556..f1aee567 100644
--- a/arch/arm/mach-shmobile/include/mach/uncompress.h
+++ b/arch/arm/mach-shmobile/include/mach/uncompress.h
@@ -16,6 +16,4 @@
 {
 }
 
-#define arch_decomp_wdog()
-
 #endif /* __ASM_MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c
index ef66f1a..8807c27 100644
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ b/arch/arm/mach-shmobile/intc-r8a7779.c
@@ -22,10 +22,10 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
 #include <mach/intc.h>
 #include <mach/r8a7779.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index f0c5e51..9783699 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -23,10 +23,10 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/intc.h>
 #include <mach/irqs.h>
 #include <mach/sh73a0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index ed8d235..1f958d7 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -12,7 +12,6 @@
  */
 #include <linux/init.h>
 #include <linux/smp.h>
-#include <asm/hardware/gic.h>
 
 void __init shmobile_smp_init_cpus(unsigned int ncores)
 {
@@ -26,6 +25,4 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index a47beeb..47662a5 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -20,13 +20,14 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/gpio-em.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/io.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/emev2.h>
@@ -35,7 +36,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
 
 static struct map_desc emev2_io_desc[] __initdata = {
 #ifdef CONFIG_SMP
@@ -445,29 +445,18 @@
 			     emev2_auxdata_lookup, NULL);
 }
 
-static const struct of_device_id emev2_dt_irq_match[] = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{},
-};
-
 static const char *emev2_boards_compat_dt[] __initdata = {
 	"renesas,emev2",
 	NULL,
 };
 
-void __init emev2_init_irq_dt(void)
-{
-	of_irq_init(emev2_dt_irq_match);
-}
-
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.init_early	= emev2_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= emev2_init_irq_dt,
-	.handle_irq	= gic_handle_irq,
+	.init_irq	= irqchip_init,
 	.init_machine	= emev2_add_standard_devices_dt,
-	.timer		= &shmobile_timer,
+	.init_time	= shmobile_timer_init,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 0952224..03c69f9 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -705,12 +705,6 @@
 	rmobile_add_device_to_domain("A3SP",	&i2c1_device);
 }
 
-static void __init r8a7740_earlytimer_init(void)
-{
-	r8a7740_clock_init(0);
-	shmobile_earlytimer_init();
-}
-
 void __init r8a7740_add_early_devices(void)
 {
 	early_platform_add_devices(r8a7740_early_devices,
@@ -718,9 +712,6 @@
 
 	/* setup early console here as well */
 	shmobile_setup_console();
-
-	/* override timer setup with soc-specific code */
-	shmobile_timer.init = r8a7740_earlytimer_init;
 }
 
 #ifdef CONFIG_USE_OF
@@ -763,7 +754,7 @@
 	.init_irq	= r8a7740_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= r8a7740_add_standard_devices_dt,
-	.timer		= &shmobile_timer,
+	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 7a1ad4f..a181ced 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -339,7 +339,7 @@
 /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
 void __init __weak r8a7779_register_twd(void) { }
 
-static void __init r8a7779_earlytimer_init(void)
+void __init r8a7779_earlytimer_init(void)
 {
 	r8a7779_clock_init();
 	shmobile_earlytimer_init();
@@ -366,7 +366,4 @@
 	 * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
 	 * command line in case of the marzen board.
 	 */
-
-	/* override timer setup with soc-specific code */
-	shmobile_timer.init = r8a7779_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index c917882..191ae72 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1054,7 +1054,7 @@
 				       ARRAY_SIZE(domain_devices));
 }
 
-static void __init sh7372_earlytimer_init(void)
+void __init sh7372_earlytimer_init(void)
 {
 	sh7372_clock_init();
 	shmobile_earlytimer_init();
@@ -1067,9 +1067,6 @@
 
 	/* setup early console here as well */
 	shmobile_setup_console();
-
-	/* override timer setup with soc-specific code */
-	shmobile_timer.init = sh7372_earlytimer_init;
 }
 
 #ifdef CONFIG_USE_OF
@@ -1113,7 +1110,7 @@
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= sh7372_add_standard_devices_dt,
-	.timer		= &shmobile_timer,
+	.init_time	= shmobile_timer_init,
 	.dt_compat	= sh7372_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index db99a4a..8c2d642 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -796,7 +796,7 @@
 /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
 void __init __weak sh73a0_register_twd(void) { }
 
-static void __init sh73a0_earlytimer_init(void)
+void __init sh73a0_earlytimer_init(void)
 {
 	sh73a0_clock_init();
 	shmobile_earlytimer_init();
@@ -810,7 +810,4 @@
 
 	/* setup early console here as well */
 	shmobile_setup_console();
-
-	/* override timer setup with soc-specific code */
-	shmobile_timer.init = sh73a0_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index f674562..953eb1f 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -23,11 +23,11 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
 #include <mach/emev2.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
 #include <asm/cacheflush.h>
 
 #define EMEV2_SCU_BASE 0x1e000000
@@ -100,7 +100,7 @@
 	/* Tell ROM loader about our vector (in headsmp.S) */
 	emev2_set_boot_vector(__pa(shmobile_secondary_vector));
 
-	gic_raise_softirq(cpumask_of(cpu), 0);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 	return 0;
 }
 
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 2ce6af9..3a4acf2 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -23,12 +23,12 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
 #include <mach/r8a7779.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
-#include <asm/hardware/gic.h>
 
 #define AVECR IOMEM(0xfe700040)
 
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 624f00f..5c5bcb5 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -23,12 +23,12 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
 #include <asm/smp_plat.h>
 #include <mach/sh73a0.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
-#include <asm/hardware/gic.h>
 
 #define WUPCR		IOMEM(0xe6151010)
 #define SRESCR		IOMEM(0xe6151018)
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index a689197..fdbe54a 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -60,10 +60,6 @@
 	late_time_init = shmobile_late_time_init;
 }
 
-static void __init shmobile_timer_init(void)
+void __init shmobile_timer_init(void)
 {
 }
-
-struct sys_timer shmobile_timer = {
-	.init		= shmobile_timer_init,
-};
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index 68dd1b6..4e9e69d 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -22,9 +22,9 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_plat.h>
 
@@ -83,8 +83,6 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index 6732924..27d6846 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -15,12 +15,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/dw_apb_timer.h>
+#include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -62,11 +62,6 @@
 	early_printk("Early printk initialized\n");
 }
 
-const static struct of_device_id irq_match[] = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{}
-};
-
 void __init socfpga_sysmgr_init(void)
 {
 	struct device_node *np;
@@ -78,9 +73,9 @@
 	rst_manager_base_addr = of_iomap(np, 0);
 }
 
-static void __init gic_init_irq(void)
+static void __init socfpga_init_irq(void)
 {
-	of_irq_init(irq_match);
+	irqchip_init();
 	socfpga_sysmgr_init();
 }
 
@@ -105,9 +100,8 @@
 DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
 	.smp		= smp_ops(socfpga_smp_ops),
 	.map_io		= socfpga_map_io,
-	.init_irq	= gic_init_irq,
-	.handle_irq     = gic_handle_irq,
-	.timer		= &dw_apb_timer,
+	.init_irq	= socfpga_init_irq,
+	.init_time	= dw_apb_timer_init,
 	.init_machine	= socfpga_cyclone5_init,
 	.restart	= socfpga_cyclone5_restart,
 	.dt_compat	= altera_dt_match,
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
index c33f4d9..633e678 100644
--- a/arch/arm/mach-spear13xx/include/mach/generic.h
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -18,7 +18,7 @@
 #include <asm/mach/time.h>
 
 /* Add spear13xx structure declarations here */
-extern struct sys_timer spear13xx_timer;
+extern void spear13xx_timer_init(void);
 extern struct pl022_ssp_controller pl022_plat_data;
 extern struct dw_dma_platform_data dmac_plat_data;
 extern struct dw_dma_slave cf_dma_priv;
@@ -28,7 +28,6 @@
 /* Add spear13xx family function declarations here */
 void __init spear_setup_of_timer(void);
 void __init spear13xx_map_io(void);
-void __init spear13xx_dt_init_irq(void);
 void __init spear13xx_l2x0_init(void);
 bool dw_dma_filter(struct dma_chan *chan, void *slave);
 void spear_restart(char, const char *);
diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c
index 2eaa3fa..af4ade6 100644
--- a/arch/arm/mach-spear13xx/platsmp.c
+++ b/arch/arm/mach-spear13xx/platsmp.c
@@ -15,8 +15,8 @@
 #include <linux/jiffies.h>
 #include <linux/io.h>
 #include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 #include <mach/spear.h>
 #include <mach/generic.h>
@@ -104,8 +104,6 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
index 02f4724..56214d1 100644
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -14,9 +14,9 @@
 #define pr_fmt(fmt) "SPEAr1310: " fmt
 
 #include <linux/amba/pl022.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <linux/pata_arasan_cf_data.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/generic.h>
@@ -90,9 +90,8 @@
 DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
 	.smp		=	smp_ops(spear13xx_smp_ops),
 	.map_io		=	spear1310_map_io,
-	.init_irq	=	spear13xx_dt_init_irq,
-	.handle_irq	=	gic_handle_irq,
-	.timer		=	&spear13xx_timer,
+	.init_irq	=	irqchip_init,
+	.init_time	=	spear13xx_timer_init,
 	.init_machine	=	spear1310_dt_init,
 	.restart	=	spear_restart,
 	.dt_compat	=	spear1310_dt_board_compat,
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
index 081014f..9a28beb 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -18,7 +18,7 @@
 #include <linux/delay.h>
 #include <linux/dw_dmac.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/gic.h>
+#include <linux/irqchip.h>
 #include <asm/mach/arch.h>
 #include <mach/dma.h>
 #include <mach/generic.h>
@@ -184,9 +184,8 @@
 DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
 	.smp		=	smp_ops(spear13xx_smp_ops),
 	.map_io		=	spear13xx_map_io,
-	.init_irq	=	spear13xx_dt_init_irq,
-	.handle_irq	=	gic_handle_irq,
-	.timer		=	&spear13xx_timer,
+	.init_irq	=	irqchip_init,
+	.init_time	=	spear13xx_timer_init,
 	.init_machine	=	spear1340_dt_init,
 	.restart	=	spear_restart,
 	.dt_compat	=	spear1340_dt_board_compat,
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index c4af775..c7d2b4a 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -17,9 +17,8 @@
 #include <linux/clk.h>
 #include <linux/dw_dmac.h>
 #include <linux/err.h>
-#include <linux/of_irq.h>
+#include <linux/of.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <asm/smp_twd.h>
 #include <mach/dma.h>
@@ -153,7 +152,7 @@
 		pr_err("%s: Unknown machine\n", __func__);
 }
 
-static void __init spear13xx_timer_init(void)
+void __init spear13xx_timer_init(void)
 {
 	char pclk_name[] = "osc_24m_clk";
 	struct clk *gpt_clk, *pclk;
@@ -182,17 +181,3 @@
 	spear_setup_of_timer();
 	twd_local_timer_of_register();
 }
-
-struct sys_timer spear13xx_timer = {
-	.init = spear13xx_timer_init,
-};
-
-static const struct of_device_id gic_of_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
-	{ /* Sentinel */ }
-};
-
-void __init spear13xx_dt_init_irq(void)
-{
-	of_irq_init(gic_of_match);
-}
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index ce19113..df31079 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -22,7 +22,7 @@
 #include <asm/mach/map.h>
 
 /* Add spear3xx family device structure declarations here */
-extern struct sys_timer spear3xx_timer;
+extern void spear3xx_timer_init(void);
 extern struct pl022_ssp_controller pl022_plat_data;
 extern struct pl08x_platform_data pl080_plat_data;
 
@@ -30,7 +30,6 @@
 void __init spear_setup_of_timer(void);
 void __init spear3xx_clk_init(void);
 void __init spear3xx_map_io(void);
-void __init spear3xx_dt_init_irq(void);
 
 void spear_restart(char, const char *);
 
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index a69cbfd..bbc9b7e 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -14,8 +14,8 @@
 #define pr_fmt(fmt) "SPEAr300: " fmt
 
 #include <linux/amba/pl08x.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
@@ -212,9 +212,8 @@
 
 DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
 	.map_io		=	spear300_map_io,
-	.init_irq	=	spear3xx_dt_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
+	.init_irq	=	irqchip_init,
+	.init_time	=	spear3xx_timer_init,
 	.init_machine	=	spear300_dt_init,
 	.restart	=	spear_restart,
 	.dt_compat	=	spear300_dt_board_compat,
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index b963ebb..c13a434 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -15,8 +15,8 @@
 
 #include <linux/amba/pl08x.h>
 #include <linux/amba/serial.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
@@ -254,9 +254,8 @@
 
 DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
 	.map_io		=	spear310_map_io,
-	.init_irq	=	spear3xx_dt_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
+	.init_irq	=	irqchip_init,
+	.init_time	=	spear3xx_timer_init,
 	.init_machine	=	spear310_dt_init,
 	.restart	=	spear_restart,
 	.dt_compat	=	spear310_dt_board_compat,
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 66e3a0c..e1c7707 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -16,8 +16,8 @@
 #include <linux/amba/pl022.h>
 #include <linux/amba/pl08x.h>
 #include <linux/amba/serial.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
@@ -268,9 +268,8 @@
 
 DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
 	.map_io		=	spear320_map_io,
-	.init_irq	=	spear3xx_dt_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
+	.init_irq	=	irqchip_init,
+	.init_time	=	spear3xx_timer_init,
 	.init_machine	=	spear320_dt_init,
 	.restart	=	spear_restart,
 	.dt_compat	=	spear320_dt_board_compat,
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 38fe95d..b2ba516 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -15,11 +15,8 @@
 
 #include <linux/amba/pl022.h>
 #include <linux/amba/pl08x.h>
-#include <linux/irqchip/spear-shirq.h>
-#include <linux/of_irq.h>
 #include <linux/io.h>
 #include <asm/hardware/pl080.h>
-#include <asm/hardware/vic.h>
 #include <plat/pl080.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
@@ -87,7 +84,7 @@
 	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
 }
 
-static void __init spear3xx_timer_init(void)
+void __init spear3xx_timer_init(void)
 {
 	char pclk_name[] = "pll3_clk";
 	struct clk *gpt_clk, *pclk;
@@ -115,20 +112,3 @@
 
 	spear_setup_of_timer();
 }
-
-struct sys_timer spear3xx_timer = {
-	.init = spear3xx_timer_init,
-};
-
-static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
-	{ .compatible = "st,spear300-shirq", .data = spear300_shirq_of_init, },
-	{ .compatible = "st,spear310-shirq", .data = spear310_shirq_of_init, },
-	{ .compatible = "st,spear320-shirq", .data = spear320_shirq_of_init, },
-	{ /* Sentinel */ }
-};
-
-void __init spear3xx_dt_init_irq(void)
-{
-	of_irq_init(vic_of_match);
-}
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 5a5a52d..b8bd33c 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -16,12 +16,11 @@
 #include <linux/amba/pl08x.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <asm/hardware/pl080.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
@@ -374,7 +373,7 @@
 	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
 }
 
-static void __init spear6xx_timer_init(void)
+void __init spear6xx_timer_init(void)
 {
 	char pclk_name[] = "pll3_clk";
 	struct clk *gpt_clk, *pclk;
@@ -403,10 +402,6 @@
 	spear_setup_of_timer();
 }
 
-struct sys_timer spear6xx_timer = {
-	.init = spear6xx_timer_init,
-};
-
 /* Add auxdata to pass platform data */
 struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL,
@@ -425,21 +420,10 @@
 	NULL
 };
 
-static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
-	{ /* Sentinel */ }
-};
-
-static void __init spear6xx_dt_init_irq(void)
-{
-	of_irq_init(vic_of_match);
-}
-
 DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
 	.map_io		=	spear6xx_map_io,
-	.init_irq	=	spear6xx_dt_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear6xx_timer,
+	.init_irq	=	irqchip_init,
+	.init_time	=	spear6xx_timer_init,
 	.init_machine	=	spear600_dt_init,
 	.restart	=	spear_restart,
 	.dt_compat	=	spear600_dt_board_compat,
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 1dc8a92..23afb73 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -21,15 +21,16 @@
 
 #include <linux/irqchip/sunxi.h>
 
-#include <asm/hardware/vic.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "sunxi.h"
 
 #define WATCHDOG_CTRL_REG	0x00
+#define WATCHDOG_CTRL_RESTART		(1 << 0)
 #define WATCHDOG_MODE_REG	0x04
+#define WATCHDOG_MODE_ENABLE		(1 << 0)
+#define WATCHDOG_MODE_RESET_ENABLE	(1 << 1)
 
 static void __iomem *wdt_base;
 
@@ -50,11 +51,19 @@
 		return;
 
 	/* Enable timer and set reset bit in the watchdog */
-	writel(3, wdt_base + WATCHDOG_MODE_REG);
-	writel(0xa57 << 1 | 1, wdt_base + WATCHDOG_CTRL_REG);
-	while(1) {
+	writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE,
+		wdt_base + WATCHDOG_MODE_REG);
+
+	/*
+	 * Restart the watchdog. The default (and lowest) interval
+	 * value for the watchdog is 0.5s.
+	 */
+	writel(WATCHDOG_CTRL_RESTART, wdt_base + WATCHDOG_CTRL_REG);
+
+	while (1) {
 		mdelay(5);
-		writel(3, wdt_base + WATCHDOG_MODE_REG);
+		writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE,
+			wdt_base + WATCHDOG_MODE_REG);
 	}
 }
 
@@ -91,6 +100,6 @@
 	.init_irq	= sunxi_init_irq,
 	.handle_irq	= sunxi_handle_irq,
 	.restart	= sunxi_restart,
-	.timer		= &sunxi_timer,
+	.init_time	= &sunxi_timer_init,
 	.dt_compat	= sunxi_board_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index b442f15..1ec7f80 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -6,9 +6,9 @@
 	bool "Enable support for Tegra20 family"
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_742230
+	select ARM_ERRATA_742230 if SMP
 	select ARM_ERRATA_751472
-	select ARM_ERRATA_754327
+	select ARM_ERRATA_754327 if SMP
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CPU_FREQ_TABLE if CPU_FREQ
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 0979e8b..f052096 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -2,15 +2,16 @@
 obj-y                                   += io.o
 obj-y                                   += irq.o
 obj-y                                   += clock.o
-obj-y                                   += timer.o
 obj-y					+= fuse.o
 obj-y					+= pmc.o
 obj-y					+= flowctrl.o
 obj-y					+= powergate.o
 obj-y					+= apbio.o
 obj-y					+= pm.o
+obj-y					+= reset.o
+obj-y					+= reset-handler.o
+obj-y					+= sleep.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
-obj-$(CONFIG_CPU_IDLE)			+= sleep.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra20_clocks.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra20_clocks_data.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra20_speedo.o
@@ -27,7 +28,6 @@
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= cpuidle-tegra30.o
 endif
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
-obj-$(CONFIG_SMP)                       += reset.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
index d091675..d7aa52e 100644
--- a/arch/arm/mach-tegra/apbio.c
+++ b/arch/arm/mach-tegra/apbio.c
@@ -38,7 +38,7 @@
 static struct dma_chan *tegra_apb_dma_chan;
 static struct dma_slave_config dma_sconfig;
 
-bool tegra_apb_dma_init(void)
+static bool tegra_apb_dma_init(void)
 {
 	dma_cap_mask_t mask;
 
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 734d9cc..d320f7a 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -15,6 +15,7 @@
  *
  */
 
+#include <linux/clocksource.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -25,7 +26,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/pda_power.h>
 #include <linux/platform_data/tegra_usb.h>
@@ -34,7 +34,6 @@
 #include <linux/i2c-tegra.h>
 #include <linux/usb/tegra_usb_phy.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -45,31 +44,31 @@
 #include "common.h"
 #include "iomap.h"
 
-struct tegra_ehci_platform_data tegra_ehci1_pdata = {
+static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
 	.operating_mode = TEGRA_USB_OTG,
 	.power_down_on_bus_suspend = 1,
 	.vbus_gpio = -1,
 };
 
-struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
 	.reset_gpio = -1,
 	.clk = "cdev2",
 };
 
-struct tegra_ehci_platform_data tegra_ehci2_pdata = {
+static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
 	.phy_config = &tegra_ehci2_ulpi_phy_config,
 	.operating_mode = TEGRA_USB_HOST,
 	.power_down_on_bus_suspend = 1,
 	.vbus_gpio = -1,
 };
 
-struct tegra_ehci_platform_data tegra_ehci3_pdata = {
+static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
 	.operating_mode = TEGRA_USB_HOST,
 	.power_down_on_bus_suspend = 1,
 	.vbus_gpio = -1,
 };
 
-struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL),
@@ -202,8 +201,7 @@
 	.smp		= smp_ops(tegra_smp_ops),
 	.init_early	= tegra20_init_early,
 	.init_irq	= tegra_dt_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer		= &tegra_sys_timer,
+	.init_time	= clocksource_of_init,
 	.init_machine	= tegra_dt_init,
 	.init_late	= tegra_dt_init_late,
 	.restart	= tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 6497d12..97e1f67 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -23,6 +23,7 @@
  *
  */
 
+#include <linux/clocksource.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -31,14 +32,13 @@
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include "board.h"
 #include "clock.h"
 #include "common.h"
 #include "iomap.h"
 
-struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000400, "sdhci-tegra.2", NULL),
@@ -112,8 +112,7 @@
 	.map_io		= tegra_map_common_io,
 	.init_early	= tegra30_init_early,
 	.init_irq	= tegra_dt_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer		= &tegra_sys_timer,
+	.init_time	= clocksource_of_init,
 	.init_machine	= tegra30_dt_init,
 	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 91fbe73..da8f5a3 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -55,5 +55,4 @@
 
 void __init tegra_paz00_wifikill_init(void);
 
-extern struct sys_timer tegra_sys_timer;
 #endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index d54cfc5..8f0ffe9 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -21,10 +21,9 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
 
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/powergate.h>
 
@@ -37,6 +36,7 @@
 #include "apbio.h"
 #include "sleep.h"
 #include "pm.h"
+#include "reset.h"
 
 /*
  * Storage for debug-macro.S's state.
@@ -57,15 +57,10 @@
 };
 
 #ifdef CONFIG_OF
-static const struct of_device_id tegra_dt_irq_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
-	{ }
-};
-
 void __init tegra_dt_init_irq(void)
 {
 	tegra_init_irq();
-	of_irq_init(tegra_dt_irq_match);
+	irqchip_init();
 }
 #endif
 
@@ -137,6 +132,7 @@
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 void __init tegra20_init_early(void)
 {
+	tegra_cpu_reset_handler_init();
 	tegra_apb_io_init();
 	tegra_init_fuse();
 	tegra2_init_clocks();
@@ -150,6 +146,7 @@
 #ifdef CONFIG_ARCH_TEGRA_3x_SOC
 void __init tegra30_init_early(void)
 {
+	tegra_cpu_reset_handler_init();
 	tegra_apb_io_init();
 	tegra_init_fuse();
 	tegra30_init_clocks();
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
index 02f71b4..32f8eb3 100644
--- a/arch/arm/mach-tegra/common.h
+++ b/arch/arm/mach-tegra/common.h
@@ -1,4 +1,5 @@
 extern struct smp_operations tegra_smp_ops;
 
+extern int tegra_cpu_kill(unsigned int cpu);
 extern void tegra_cpu_die(unsigned int cpu);
 extern int tegra_cpu_disable(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index a36a03d..ece29ab 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -214,24 +214,6 @@
 	if (policy->cpu >= NUM_CPUS)
 		return -EINVAL;
 
-	cpu_clk = clk_get_sys(NULL, "cpu");
-	if (IS_ERR(cpu_clk))
-		return PTR_ERR(cpu_clk);
-
-	pll_x_clk = clk_get_sys(NULL, "pll_x");
-	if (IS_ERR(pll_x_clk))
-		return PTR_ERR(pll_x_clk);
-
-	pll_p_clk = clk_get_sys(NULL, "pll_p");
-	if (IS_ERR(pll_p_clk))
-		return PTR_ERR(pll_p_clk);
-
-	emc_clk = clk_get_sys("cpu", "emc");
-	if (IS_ERR(emc_clk)) {
-		clk_put(cpu_clk);
-		return PTR_ERR(emc_clk);
-	}
-
 	clk_prepare_enable(emc_clk);
 	clk_prepare_enable(cpu_clk);
 
@@ -255,8 +237,6 @@
 {
 	cpufreq_frequency_table_cpuinfo(policy, freq_table);
 	clk_disable_unprepare(emc_clk);
-	clk_put(emc_clk);
-	clk_put(cpu_clk);
 	return 0;
 }
 
@@ -277,12 +257,32 @@
 
 static int __init tegra_cpufreq_init(void)
 {
+	cpu_clk = clk_get_sys(NULL, "cpu");
+	if (IS_ERR(cpu_clk))
+		return PTR_ERR(cpu_clk);
+
+	pll_x_clk = clk_get_sys(NULL, "pll_x");
+	if (IS_ERR(pll_x_clk))
+		return PTR_ERR(pll_x_clk);
+
+	pll_p_clk = clk_get_sys(NULL, "pll_p");
+	if (IS_ERR(pll_p_clk))
+		return PTR_ERR(pll_p_clk);
+
+	emc_clk = clk_get_sys("cpu", "emc");
+	if (IS_ERR(emc_clk)) {
+		clk_put(cpu_clk);
+		return PTR_ERR(emc_clk);
+	}
+
 	return cpufreq_register_driver(&tegra_cpufreq_driver);
 }
 
 static void __exit tegra_cpufreq_exit(void)
 {
         cpufreq_unregister_driver(&tegra_cpufreq_driver);
+	clk_put(emc_clk);
+	clk_put(cpu_clk);
 }
 
 
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
index 5e8cbf5..82530bd 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra30.c
@@ -121,9 +121,9 @@
 }
 #endif
 
-static int __cpuinit tegra30_idle_lp2(struct cpuidle_device *dev,
-				      struct cpuidle_driver *drv,
-				      int index)
+static int tegra30_idle_lp2(struct cpuidle_device *dev,
+			    struct cpuidle_driver *drv,
+			    int index)
 {
 	u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu;
 	bool entered_lp2 = false;
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index a2250dd..5393eb2 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -26,14 +26,14 @@
 #include "flowctrl.h"
 #include "iomap.h"
 
-u8 flowctrl_offset_halt_cpu[] = {
+static u8 flowctrl_offset_halt_cpu[] = {
 	FLOW_CTRL_HALT_CPU0_EVENTS,
 	FLOW_CTRL_HALT_CPU1_EVENTS,
 	FLOW_CTRL_HALT_CPU1_EVENTS + 8,
 	FLOW_CTRL_HALT_CPU1_EVENTS + 16,
 };
 
-u8 flowctrl_offset_cpu_csr[] = {
+static u8 flowctrl_offset_cpu_csr[] = {
 	FLOW_CTRL_CPU0_CSR,
 	FLOW_CTRL_CPU1_CSR,
 	FLOW_CTRL_CPU1_CSR + 8,
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index 4a317fa..b283481 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -1,22 +1,9 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-#include <asm/cache.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "flowctrl.h"
-#include "iomap.h"
-#include "reset.h"
 #include "sleep.h"
 
-#define APB_MISC_GP_HIDREV	0x804
-#define PMC_SCRATCH41	0x140
-
-#define RESET_DATA(x)	((TEGRA_RESET_##x)*4)
-
         .section ".text.head", "ax"
-	__CPUINIT
 
 /*
  * Tegra specific entry point for secondary CPUs.
@@ -61,7 +48,6 @@
         mov     pc, lr
 ENDPROC(v7_invalidate_l1)
 
-
 ENTRY(tegra_secondary_startup)
         bl      v7_invalidate_l1
 	/* Enable coresight */
@@ -69,210 +55,3 @@
 	mcr	p14, 0, r0, c7, c12, 6
         b       secondary_startup
 ENDPROC(tegra_secondary_startup)
-
-#ifdef CONFIG_PM_SLEEP
-/*
- *	tegra_resume
- *
- *	  CPU boot vector when restarting the a CPU following
- *	  an LP2 transition. Also branched to by LP0 and LP1 resume after
- *	  re-enabling sdram.
- */
-ENTRY(tegra_resume)
-	bl	v7_invalidate_l1
-	/* Enable coresight */
-	mov32	r0, 0xC5ACCE55
-	mcr	p14, 0, r0, c7, c12, 6
-
-	cpu_id	r0
-	cmp	r0, #0				@ CPU0?
-	bne	cpu_resume			@ no
-
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-	/* Are we on Tegra20? */
-	mov32	r6, TEGRA_APB_MISC_BASE
-	ldr	r0, [r6, #APB_MISC_GP_HIDREV]
-	and	r0, r0, #0xff00
-	cmp	r0, #(0x20 << 8)
-	beq	1f				@ Yes
-	/* Clear the flow controller flags for this CPU. */
-	mov32	r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR	@ CPU0 CSR
-	ldr	r1, [r2]
-	/* Clear event & intr flag */
-	orr	r1, r1, \
-		#FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
-	movw	r0, #0x0FFD	@ enable, cluster_switch, immed, & bitmaps
-	bic	r1, r1, r0
-	str	r1, [r2]
-1:
-#endif
-
-#ifdef CONFIG_HAVE_ARM_SCU
-	/* enable SCU */
-	mov32	r0, TEGRA_ARM_PERIF_BASE
-	ldr	r1, [r0]
-	orr	r1, r1, #1
-	str	r1, [r0]
-#endif
-
-	/* L2 cache resume & re-enable */
-	l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
-
-	b	cpu_resume
-ENDPROC(tegra_resume)
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-	.globl	l2x0_saved_regs_addr
-l2x0_saved_regs_addr:
-	.long	0
-#endif
-
-	.align L1_CACHE_SHIFT
-ENTRY(__tegra_cpu_reset_handler_start)
-
-/*
- * __tegra_cpu_reset_handler:
- *
- * Common handler for all CPU reset events.
- *
- * Register usage within the reset handler:
- *
- *      R7  = CPU present (to the OS) mask
- *      R8  = CPU in LP1 state mask
- *      R9  = CPU in LP2 state mask
- *      R10 = CPU number
- *      R11 = CPU mask
- *      R12 = pointer to reset handler data
- *
- * NOTE: This code is copied to IRAM. All code and data accesses
- *       must be position-independent.
- */
-
-	.align L1_CACHE_SHIFT
-ENTRY(__tegra_cpu_reset_handler)
-
-	cpsid	aif, 0x13			@ SVC mode, interrupts disabled
-	mrc	p15, 0, r10, c0, c0, 5		@ MPIDR
-	and	r10, r10, #0x3			@ R10 = CPU number
-	mov	r11, #1
-	mov	r11, r11, lsl r10  		@ R11 = CPU mask
-	adr	r12, __tegra_cpu_reset_handler_data
-
-#ifdef CONFIG_SMP
-	/* Does the OS know about this CPU? */
-	ldr	r7, [r12, #RESET_DATA(MASK_PRESENT)]
-	tst	r7, r11 			@ if !present
-	bleq	__die				@ CPU not present (to OS)
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-	/* Are we on Tegra20? */
-	mov32	r6, TEGRA_APB_MISC_BASE
-	ldr	r0, [r6, #APB_MISC_GP_HIDREV]
-	and	r0, r0, #0xff00
-	cmp	r0, #(0x20 << 8)
-	bne	1f
-	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
-	mov32	r6, TEGRA_PMC_BASE
-	mov	r0, #0
-	cmp	r10, #0
-	strne	r0, [r6, #PMC_SCRATCH41]
-1:
-#endif
-
-	/* Waking up from LP2? */
-	ldr	r9, [r12, #RESET_DATA(MASK_LP2)]
-	tst	r9, r11				@ if in_lp2
-	beq	__is_not_lp2
-	ldr	lr, [r12, #RESET_DATA(STARTUP_LP2)]
-	cmp	lr, #0
-	bleq	__die				@ no LP2 startup handler
-	bx	lr
-
-__is_not_lp2:
-
-#ifdef CONFIG_SMP
-	/*
-	 * Can only be secondary boot (initial or hotplug) but CPU 0
-	 * cannot be here.
-	 */
-	cmp	r10, #0
-	bleq	__die				@ CPU0 cannot be here
-	ldr	lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
-	cmp	lr, #0
-	bleq	__die				@ no secondary startup handler
-	bx	lr
-#endif
-
-/*
- * We don't know why the CPU reset. Just kill it.
- * The LR register will contain the address we died at + 4.
- */
-
-__die:
-	sub	lr, lr, #4
-	mov32	r7, TEGRA_PMC_BASE
-	str	lr, [r7, #PMC_SCRATCH41]
-
-	mov32	r7, TEGRA_CLK_RESET_BASE
-
-	/* Are we on Tegra20? */
-	mov32	r6, TEGRA_APB_MISC_BASE
-	ldr	r0, [r6, #APB_MISC_GP_HIDREV]
-	and	r0, r0, #0xff00
-	cmp	r0, #(0x20 << 8)
-	bne	1f
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-	mov32	r0, 0x1111
-	mov	r1, r0, lsl r10
-	str	r1, [r7, #0x340]		@ CLK_RST_CPU_CMPLX_SET
-#endif
-1:
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-	mov32	r6, TEGRA_FLOW_CTRL_BASE
-
-	cmp	r10, #0
-	moveq	r1, #FLOW_CTRL_HALT_CPU0_EVENTS
-	moveq	r2, #FLOW_CTRL_CPU0_CSR
-	movne	r1, r10, lsl #3
-	addne	r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
-	addne	r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
-
-	/* Clear CPU "event" and "interrupt" flags and power gate
-	   it when halting but not before it is in the "WFI" state. */
-	ldr	r0, [r6, +r2]
-	orr	r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
-	orr	r0, r0, #FLOW_CTRL_CSR_ENABLE
-	str	r0, [r6, +r2]
-
-	/* Unconditionally halt this CPU */
-	mov	r0, #FLOW_CTRL_WAITEVENT
-	str	r0, [r6, +r1]
-	ldr	r0, [r6, +r1]			@ memory barrier
-
-	dsb
-	isb
-	wfi					@ CPU should be power gated here
-
-	/* If the CPU didn't power gate above just kill it's clock. */
-
-	mov	r0, r11, lsl #8
-	str	r0, [r7, #348]			@ CLK_CPU_CMPLX_SET
-#endif
-
-	/* If the CPU still isn't dead, just spin here. */
-	b	.
-ENDPROC(__tegra_cpu_reset_handler)
-
-	.align L1_CACHE_SHIFT
-	.type	__tegra_cpu_reset_handler_data, %object
-	.globl	__tegra_cpu_reset_handler_data
-__tegra_cpu_reset_handler_data:
-	.rept	TEGRA_RESET_DATA_SIZE
-	.long	0
-	.endr
-	.align L1_CACHE_SHIFT
-
-ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index dca5141..6a27de4 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -19,6 +19,17 @@
 
 static void (*tegra_hotplug_shutdown)(void);
 
+int tegra_cpu_kill(unsigned cpu)
+{
+	cpu = cpu_logical_map(cpu);
+
+	/* Clock gate the CPU */
+	tegra_wait_cpu_in_reset(cpu);
+	tegra_disable_cpu_clock(cpu);
+
+	return 1;
+}
+
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -26,18 +37,12 @@
  */
 void __ref tegra_cpu_die(unsigned int cpu)
 {
-	cpu = cpu_logical_map(cpu);
-
-	/* Flush the L1 data cache. */
-	flush_cache_all();
+	/* Clean L1 data cache */
+	tegra_disable_clean_inv_dcache();
 
 	/* Shut down the current CPU. */
 	tegra_hotplug_shutdown();
 
-	/* Clock gate the CPU */
-	tegra_wait_cpu_in_reset(cpu);
-	tegra_disable_cpu_clock(cpu);
-
 	/* Should never return here. */
 	BUG();
 }
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 485003f..0838641 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -172,8 +172,4 @@
 	uart[UART_LCR << DEBUG_UART_SHIFT] = 3;
 }
 
-static inline void arch_decomp_wdog(void)
-{
-}
-
 #endif
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index b7886f1..2ff2128 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -22,8 +22,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/of.h>
-
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include "board.h"
 #include "iomap.h"
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 1b926df..3c4a43c 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -18,11 +18,12 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
 
 #include <mach/powergate.h>
 
@@ -36,6 +37,7 @@
 
 extern void tegra_secondary_startup(void);
 
+static cpumask_t tegra_cpu_init_mask;
 static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
 
 #define EVP_CPU_RESET_VECTOR \
@@ -50,6 +52,7 @@
 	 */
 	gic_secondary_init(0);
 
+	cpumask_set_cpu(cpu, &tegra_cpu_init_mask);
 }
 
 static int tegra20_power_up_cpu(unsigned int cpu)
@@ -72,14 +75,42 @@
 	if (pwrgateid < 0)
 		return pwrgateid;
 
-	/* If this is the first boot, toggle powergates directly. */
+	/*
+	 * The power up sequence of cold boot CPU and warm boot CPU
+	 * was different.
+	 *
+	 * For warm boot CPU that was resumed from CPU hotplug, the
+	 * power will be resumed automatically after un-halting the
+	 * flow controller of the warm boot CPU. We need to wait for
+	 * the confirmaiton that the CPU is powered then removing
+	 * the IO clamps.
+	 * For cold boot CPU, do not wait. After the cold boot CPU be
+	 * booted, it will run to tegra_secondary_init() and set
+	 * tegra_cpu_init_mask which influences what tegra30_power_up_cpu()
+	 * next time around.
+	 */
+	if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) {
+		timeout = jiffies + msecs_to_jiffies(50);
+		do {
+			if (!tegra_powergate_is_powered(pwrgateid))
+				goto remove_clamps;
+			udelay(10);
+		} while (time_before(jiffies, timeout));
+	}
+
+	/*
+	 * The power status of the cold boot CPU is power gated as
+	 * default. To power up the cold boot CPU, the power should
+	 * be un-gated by un-toggling the power gate register
+	 * manually.
+	 */
 	if (!tegra_powergate_is_powered(pwrgateid)) {
 		ret = tegra_powergate_power_on(pwrgateid);
 		if (ret)
 			return ret;
 
 		/* Wait for the power to come up. */
-		timeout = jiffies + 10*HZ;
+		timeout = jiffies + msecs_to_jiffies(100);
 		while (tegra_powergate_is_powered(pwrgateid)) {
 			if (time_after(jiffies, timeout))
 				return -ETIMEDOUT;
@@ -87,6 +118,7 @@
 		}
 	}
 
+remove_clamps:
 	/* CPU partition is powered. Enable the CPU clock. */
 	tegra_enable_cpu_clock(cpu);
 	udelay(10);
@@ -105,6 +137,8 @@
 {
 	int status;
 
+	cpu = cpu_logical_map(cpu);
+
 	/*
 	 * Force the CPU into reset. The CPU must remain in reset when the
 	 * flow controller state is cleared (which will cause the flow
@@ -159,13 +193,13 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
 {
-	tegra_cpu_reset_handler_init();
+	/* Always mark the boot CPU (CPU0) as initialized. */
+	cpumask_set_cpu(0, &tegra_cpu_init_mask);
+
 	scu_enable(scu_base);
 }
 
@@ -175,6 +209,7 @@
 	.smp_secondary_init	= tegra_secondary_init,
 	.smp_boot_secondary	= tegra_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= tegra_cpu_kill,
 	.cpu_die		= tegra_cpu_die,
 	.cpu_disable		= tegra_cpu_disable,
 #endif
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 1b11707..498d70b 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -148,7 +148,7 @@
 	save_cpu_arch_register();
 }
 
-void __cpuinit tegra_clear_cpu_in_lp2(int phy_cpu_id)
+void tegra_clear_cpu_in_lp2(int phy_cpu_id)
 {
 	u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
 
@@ -160,7 +160,7 @@
 	spin_unlock(&tegra_lp2_lock);
 }
 
-bool __cpuinit tegra_set_cpu_in_lp2(int phy_cpu_id)
+bool tegra_set_cpu_in_lp2(int phy_cpu_id)
 {
 	bool last_cpu = false;
 	cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask;
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
new file mode 100644
index 0000000..54382ce
--- /dev/null
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -0,0 +1,239 @@
+/*
+ * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/cache.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "flowctrl.h"
+#include "iomap.h"
+#include "reset.h"
+#include "sleep.h"
+
+#define APB_MISC_GP_HIDREV	0x804
+#define PMC_SCRATCH41	0x140
+
+#define RESET_DATA(x)	((TEGRA_RESET_##x)*4)
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ *	tegra_resume
+ *
+ *	  CPU boot vector when restarting the a CPU following
+ *	  an LP2 transition. Also branched to by LP0 and LP1 resume after
+ *	  re-enabling sdram.
+ */
+ENTRY(tegra_resume)
+	bl	v7_invalidate_l1
+	/* Enable coresight */
+	mov32	r0, 0xC5ACCE55
+	mcr	p14, 0, r0, c7, c12, 6
+
+	cpu_id	r0
+	cmp	r0, #0				@ CPU0?
+	bne	cpu_resume			@ no
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+	/* Are we on Tegra20? */
+	mov32	r6, TEGRA_APB_MISC_BASE
+	ldr	r0, [r6, #APB_MISC_GP_HIDREV]
+	and	r0, r0, #0xff00
+	cmp	r0, #(0x20 << 8)
+	beq	1f				@ Yes
+	/* Clear the flow controller flags for this CPU. */
+	mov32	r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR	@ CPU0 CSR
+	ldr	r1, [r2]
+	/* Clear event & intr flag */
+	orr	r1, r1, \
+		#FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+	movw	r0, #0x0FFD	@ enable, cluster_switch, immed, & bitmaps
+	bic	r1, r1, r0
+	str	r1, [r2]
+1:
+#endif
+
+#ifdef CONFIG_HAVE_ARM_SCU
+	/* enable SCU */
+	mov32	r0, TEGRA_ARM_PERIF_BASE
+	ldr	r1, [r0]
+	orr	r1, r1, #1
+	str	r1, [r0]
+#endif
+
+	/* L2 cache resume & re-enable */
+	l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
+
+	b	cpu_resume
+ENDPROC(tegra_resume)
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+	.globl	l2x0_saved_regs_addr
+l2x0_saved_regs_addr:
+	.long	0
+#endif
+
+	.align L1_CACHE_SHIFT
+ENTRY(__tegra_cpu_reset_handler_start)
+
+/*
+ * __tegra_cpu_reset_handler:
+ *
+ * Common handler for all CPU reset events.
+ *
+ * Register usage within the reset handler:
+ *
+ *      R7  = CPU present (to the OS) mask
+ *      R8  = CPU in LP1 state mask
+ *      R9  = CPU in LP2 state mask
+ *      R10 = CPU number
+ *      R11 = CPU mask
+ *      R12 = pointer to reset handler data
+ *
+ * NOTE: This code is copied to IRAM. All code and data accesses
+ *       must be position-independent.
+ */
+
+	.align L1_CACHE_SHIFT
+ENTRY(__tegra_cpu_reset_handler)
+
+	cpsid	aif, 0x13			@ SVC mode, interrupts disabled
+	mrc	p15, 0, r10, c0, c0, 5		@ MPIDR
+	and	r10, r10, #0x3			@ R10 = CPU number
+	mov	r11, #1
+	mov	r11, r11, lsl r10  		@ R11 = CPU mask
+	adr	r12, __tegra_cpu_reset_handler_data
+
+#ifdef CONFIG_SMP
+	/* Does the OS know about this CPU? */
+	ldr	r7, [r12, #RESET_DATA(MASK_PRESENT)]
+	tst	r7, r11 			@ if !present
+	bleq	__die				@ CPU not present (to OS)
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+	/* Are we on Tegra20? */
+	mov32	r6, TEGRA_APB_MISC_BASE
+	ldr	r0, [r6, #APB_MISC_GP_HIDREV]
+	and	r0, r0, #0xff00
+	cmp	r0, #(0x20 << 8)
+	bne	1f
+	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
+	mov32	r6, TEGRA_PMC_BASE
+	mov	r0, #0
+	cmp	r10, #0
+	strne	r0, [r6, #PMC_SCRATCH41]
+1:
+#endif
+
+	/* Waking up from LP2? */
+	ldr	r9, [r12, #RESET_DATA(MASK_LP2)]
+	tst	r9, r11				@ if in_lp2
+	beq	__is_not_lp2
+	ldr	lr, [r12, #RESET_DATA(STARTUP_LP2)]
+	cmp	lr, #0
+	bleq	__die				@ no LP2 startup handler
+	bx	lr
+
+__is_not_lp2:
+
+#ifdef CONFIG_SMP
+	/*
+	 * Can only be secondary boot (initial or hotplug) but CPU 0
+	 * cannot be here.
+	 */
+	cmp	r10, #0
+	bleq	__die				@ CPU0 cannot be here
+	ldr	lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
+	cmp	lr, #0
+	bleq	__die				@ no secondary startup handler
+	bx	lr
+#endif
+
+/*
+ * We don't know why the CPU reset. Just kill it.
+ * The LR register will contain the address we died at + 4.
+ */
+
+__die:
+	sub	lr, lr, #4
+	mov32	r7, TEGRA_PMC_BASE
+	str	lr, [r7, #PMC_SCRATCH41]
+
+	mov32	r7, TEGRA_CLK_RESET_BASE
+
+	/* Are we on Tegra20? */
+	mov32	r6, TEGRA_APB_MISC_BASE
+	ldr	r0, [r6, #APB_MISC_GP_HIDREV]
+	and	r0, r0, #0xff00
+	cmp	r0, #(0x20 << 8)
+	bne	1f
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+	mov32	r0, 0x1111
+	mov	r1, r0, lsl r10
+	str	r1, [r7, #0x340]		@ CLK_RST_CPU_CMPLX_SET
+#endif
+1:
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+	mov32	r6, TEGRA_FLOW_CTRL_BASE
+
+	cmp	r10, #0
+	moveq	r1, #FLOW_CTRL_HALT_CPU0_EVENTS
+	moveq	r2, #FLOW_CTRL_CPU0_CSR
+	movne	r1, r10, lsl #3
+	addne	r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
+	addne	r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
+
+	/* Clear CPU "event" and "interrupt" flags and power gate
+	   it when halting but not before it is in the "WFI" state. */
+	ldr	r0, [r6, +r2]
+	orr	r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+	orr	r0, r0, #FLOW_CTRL_CSR_ENABLE
+	str	r0, [r6, +r2]
+
+	/* Unconditionally halt this CPU */
+	mov	r0, #FLOW_CTRL_WAITEVENT
+	str	r0, [r6, +r1]
+	ldr	r0, [r6, +r1]			@ memory barrier
+
+	dsb
+	isb
+	wfi					@ CPU should be power gated here
+
+	/* If the CPU didn't power gate above just kill it's clock. */
+
+	mov	r0, r11, lsl #8
+	str	r0, [r7, #348]			@ CLK_CPU_CMPLX_SET
+#endif
+
+	/* If the CPU still isn't dead, just spin here. */
+	b	.
+ENDPROC(__tegra_cpu_reset_handler)
+
+	.align L1_CACHE_SHIFT
+	.type	__tegra_cpu_reset_handler_data, %object
+	.globl	__tegra_cpu_reset_handler_data
+__tegra_cpu_reset_handler_data:
+	.rept	TEGRA_RESET_DATA_SIZE
+	.long	0
+	.endr
+	.align L1_CACHE_SHIFT
+
+ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 3fd89ec..1ac434e 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -75,7 +75,7 @@
 
 #ifdef CONFIG_SMP
 	__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] =
-		*((u32 *)cpu_present_mask);
+		*((u32 *)cpu_possible_mask);
 	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] =
 		virt_to_phys((void *)tegra_secondary_startup);
 #endif
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 72ce709..ad2ca07 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -33,9 +33,6 @@
  * should never return
  */
 ENTRY(tegra20_hotplug_shutdown)
-	/* Turn off SMP coherency */
-	exit_smp r4, r5
-
 	/* Put this CPU down */
 	cpu_id	r0
 	bl	tegra20_cpu_shutdown
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 562a8e7..63a15bd 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -32,9 +32,6 @@
  * Should never return.
  */
 ENTRY(tegra30_hotplug_shutdown)
-	/* Turn off SMP coherency */
-	exit_smp r4, r5
-
 	/* Powergate this CPU */
 	mov	r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
 	bl	tegra30_cpu_shutdown
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 26afa7c..addae35 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -34,7 +34,7 @@
 #include "flowctrl.h"
 #include "sleep.h"
 
-#ifdef CONFIG_PM_SLEEP
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
 /*
  * tegra_disable_clean_inv_dcache
  *
@@ -60,7 +60,9 @@
 
 	ldmfd	sp!, {r0, r4-r5, r7, r9-r11, pc}
 ENDPROC(tegra_disable_clean_inv_dcache)
+#endif
 
+#ifdef CONFIG_PM_SLEEP
 /*
  * tegra_sleep_cpu_finish(unsigned long v2p)
  *
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index 9821ee7..56505c3 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -106,6 +106,7 @@
 #else
 void tegra_resume(void);
 int tegra_sleep_cpu_finish(unsigned long);
+void tegra_disable_clean_inv_dcache(void);
 
 #ifdef CONFIG_HOTPLUG_CPU
 void tegra20_hotplug_init(void);
diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c
index 6942c7a..741d264 100644
--- a/arch/arm/mach-tegra/tegra30_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra30_clocks_data.c
@@ -1183,7 +1183,7 @@
 	.num_parents = ARRAY_SIZE(mux_plld_out0_plld2_out0),
 };
 
-struct clk *tegra_list_clks[] = {
+static struct clk *tegra_list_clks[] = {
 	&tegra_apbdma,
 	&tegra_rtc,
 	&tegra_kbc,
@@ -1289,7 +1289,7 @@
  * configuration.  List those here to register them twice in the clock lookup
  * table under two names.
  */
-struct clk_duplicate tegra_clk_duplicates[] = {
+static struct clk_duplicate tegra_clk_duplicates[] = {
 	CLK_DUPLICATE("uarta",  "serial8250.0", NULL),
 	CLK_DUPLICATE("uartb",  "serial8250.1", NULL),
 	CLK_DUPLICATE("uartc",  "serial8250.2", NULL),
@@ -1340,7 +1340,7 @@
 	CLK_DUPLICATE("pll_d2_out0", "hdmi", "parent"),
 };
 
-struct clk *tegra_ptr_clks[] = {
+static struct clk *tegra_ptr_clks[] = {
 	&tegra_clk_32k,
 	&tegra_clk_m,
 	&tegra_clk_m_div2,
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 4ce77cd..12060ae 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -31,11 +31,11 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/clk-u300.h>
 #include <linux/platform_data/pinctrl-coh901.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -1779,8 +1779,7 @@
 	.map_io		= u300_map_io,
 	.nr_irqs	= 0,
 	.init_irq	= u300_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &u300_timer,
+	.init_time	= u300_timer_init,
 	.init_machine	= u300_init_machine,
 	.restart	= u300_restart,
 MACHINE_END
diff --git a/arch/arm/mach-u300/include/mach/uncompress.h b/arch/arm/mach-u300/include/mach/uncompress.h
index 29acb71..783e7e6 100644
--- a/arch/arm/mach-u300/include/mach/uncompress.h
+++ b/arch/arm/mach-u300/include/mach/uncompress.h
@@ -43,4 +43,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 1da10e2..d9e7320 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -349,7 +349,7 @@
 /*
  * This sets up the system timers, clock source and clock event.
  */
-static void __init u300_timer_init(void)
+void __init u300_timer_init(void)
 {
 	struct clk *clk;
 	unsigned long rate;
@@ -413,11 +413,3 @@
 	 * used by hrtimers!
 	 */
 }
-
-/*
- * Very simple system timer that only register the clock event and
- * clock source.
- */
-struct sys_timer u300_timer = {
-	.init		= u300_timer_init,
-};
diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h
index b5e9791..d34287b 100644
--- a/arch/arm/mach-u300/timer.h
+++ b/arch/arm/mach-u300/timer.h
@@ -1 +1 @@
-extern struct sys_timer u300_timer;
+extern void u300_timer_init(void);
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
index 1f47d96..7037d36 100644
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ b/arch/arm/mach-ux500/board-mop500-uib.c
@@ -13,6 +13,7 @@
 
 #include <mach/hardware.h>
 #include "board-mop500.h"
+#include "id.h"
 
 enum mop500_uib {
 	STUIB,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index b8781ca..3868aa4 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -40,7 +40,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -197,7 +196,7 @@
 	},
 };
 
-static struct ab8500_platform_data ab8500_platdata = {
+struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
 	.regulator_reg_init = ab8500_regulator_reg_init,
 	.num_regulator_reg_init	= ARRAY_SIZE(ab8500_regulator_reg_init),
@@ -633,6 +632,7 @@
 	int i2c0_devs;
 	int i;
 
+	platform_device_register(&db8500_prcmu_device);
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
 	mop500_pinmaps_init();
@@ -667,6 +667,7 @@
 	struct device *parent = NULL;
 	int i;
 
+	platform_device_register(&db8500_prcmu_device);
 	snowball_pinmaps_init();
 	parent = u8500_init_devices(&ab8500_platdata);
 
@@ -692,6 +693,7 @@
 	int i2c0_devs;
 	int i;
 
+	platform_device_register(&db8500_prcmu_device);
 	/*
 	 * The HREFv60 board removed a GPIO expander and routed
 	 * all these GPIO pins to the internal GPIO controller
@@ -733,8 +735,7 @@
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= ux500_timer_init,
 	.init_machine	= mop500_init_machine,
 	.init_late	= ux500_init_late,
 MACHINE_END
@@ -743,8 +744,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= ux500_timer_init,
 	.init_machine	= mop500_init_machine,
 	.init_late	= ux500_init_late,
 MACHINE_END
@@ -754,8 +754,7 @@
 	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= ux500_timer_init,
 	.init_machine	= hrefv60_init_machine,
 	.init_late	= ux500_init_late,
 MACHINE_END
@@ -766,8 +765,7 @@
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= ux500_timer_init,
 	.init_machine	= snowball_init_machine,
 	.init_late	= NULL,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 75d5b51..1c1609d 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -10,7 +10,8 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <mach/hardware.h>
-#include <mach/id.h>
+
+#include "id.h"
 
 static void __iomem *l2x0_base;
 
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index b80ad96..19235cf 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -27,7 +27,6 @@
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -37,7 +36,9 @@
 
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
+
 #include "board-mop500.h"
+#include "id.h"
 
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_uart_io_desc[] __initdata = {
@@ -137,14 +138,9 @@
 	.dev.platform_data	= &db8500_pmu_platdata,
 };
 
-static struct platform_device db8500_prcmu_device = {
-	.name			= "db8500-prcmu",
-};
-
 static struct platform_device *platform_devs[] __initdata = {
 	&u8500_dma40_device,
 	&db8500_pmu_device,
-	&db8500_prcmu_device,
 };
 
 static resource_size_t __initdata db8500_gpio_base[] = {
@@ -284,6 +280,8 @@
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
+			&db8500_prcmu_pdata),
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),
@@ -341,8 +339,7 @@
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= ux500_timer_init,
 	.init_machine	= u8500_init_machine,
 	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d4dcec53..537870d 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -17,9 +17,10 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-ux500.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
@@ -27,6 +28,7 @@
 #include <mach/devices.h>
 
 #include "board-mop500.h"
+#include "id.h"
 
 void __iomem *_PRCMU_BASE;
 
@@ -42,11 +44,6 @@
  * This feels fragile because it depends on the gpio device getting probed
  * _before_ any device uses the gpio interrupts.
 */
-static const struct of_device_id ux500_dt_irq_match[] = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{},
-};
-
 void __init ux500_init_irq(void)
 {
 	void __iomem *dist_base;
@@ -62,7 +59,7 @@
 
 #ifdef CONFIG_OF
 	if (of_have_populated_dt())
-		of_irq_init(ux500_dt_irq_match);
+		irqchip_init();
 	else
 #endif
 		gic_init(0, 29, dist_base, cpu_base);
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 318d490..f3d9419 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -13,11 +13,13 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
 #include <linux/platform_data/dma-ste-dma40.h>
+#include <linux/mfd/dbx500-prcmu.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/irqs.h>
 
+#include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
 
 static struct resource dma40_resources[] = {
@@ -194,3 +196,45 @@
 	.num_resources = ARRAY_SIZE(keypad_resources),
 	.resource = keypad_resources,
 };
+
+struct prcmu_pdata db8500_prcmu_pdata = {
+	.ab_platdata	= &ab8500_platdata,
+	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
+	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
+};
+
+static struct resource db8500_prcmu_res[] = {
+	{
+		.name  = "prcmu",
+		.start = U8500_PRCMU_BASE,
+		.end   = U8500_PRCMU_BASE + SZ_8K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "prcmu-tcdm",
+		.start = U8500_PRCMU_TCDM_BASE,
+		.end   = U8500_PRCMU_TCDM_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "irq",
+		.start = IRQ_DB8500_PRCMU1,
+		.end   = IRQ_DB8500_PRCMU1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "prcmu-tcpm",
+		.start = U8500_PRCMU_TCPM_BASE,
+		.end   = U8500_PRCMU_TCPM_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device db8500_prcmu_device = {
+	.name			= "db8500-prcmu",
+	.resource		= db8500_prcmu_res,
+	.num_resources		= ARRAY_SIZE(db8500_prcmu_res),
+	.dev = {
+		.platform_data = &db8500_prcmu_pdata,
+	},
+};
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index a5e05f6..dbcb35c 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,6 +14,11 @@
 
 struct ske_keypad_platform_data;
 struct pl022_ssp_controller;
+struct platform_device;
+
+extern struct ab8500_platform_data ab8500_platdata;
+extern struct prcmu_pdata db8500_prcmu_pdata;
+extern struct platform_device db8500_prcmu_device;
 
 static inline struct platform_device *
 db8500_add_ske_keypad(struct device *parent,
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
index d157992..9f95184 100644
--- a/arch/arm/mach-ux500/id.c
+++ b/arch/arm/mach-ux500/id.c
@@ -17,6 +17,8 @@
 #include <mach/hardware.h>
 #include <mach/setup.h>
 
+#include "id.h"
+
 struct dbx500_asic_id dbx500_id;
 
 static unsigned int ux500_read_asicid(phys_addr_t addr)
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/id.h
similarity index 85%
rename from arch/arm/mach-ux500/include/mach/id.h
rename to arch/arm/mach-ux500/id.h
index 9c42642..bcc58a8 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/id.h
@@ -61,9 +61,14 @@
 	return dbx500_partnumber() == 0x8540;
 }
 
+static inline bool __attribute_const__ cpu_is_u8580(void)
+{
+	return dbx500_partnumber() == 0x8580;
+}
+
 static inline bool cpu_is_ux540_family(void)
 {
-	return cpu_is_u9540() || cpu_is_u8540();
+	return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580();
 }
 
 /*
@@ -115,6 +120,20 @@
 	return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
 }
 
+/*
+ * 8540 revisions
+ */
+
+static inline bool __attribute_const__ cpu_is_u8540v10(void)
+{
+	return cpu_is_u8540() && dbx500_revision() == 0xA0;
+}
+
+static inline bool __attribute_const__ cpu_is_u8580v10(void)
+{
+	return cpu_is_u8580() && dbx500_revision() == 0xA0;
+}
+
 static inline bool ux500_is_svp(void)
 {
 	return false;
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 28d16e7..5201dda 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -39,7 +39,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <mach/id.h>
 extern void __iomem *_PRCMU_BASE;
 
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 6be4c4d..bddce2b 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -28,8 +28,7 @@
 struct amba_device;
 extern void __init amba_add_devices(struct amba_device *devs[], int num);
 
-struct sys_timer;
-extern struct sys_timer ux500_timer;
+extern void ux500_timer_init(void);
 
 #define __IO_DEV_DESC(x, sz)	{		\
 	.virtual	= IO_ADDRESS(x),	\
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index d60ecd1..36969d5 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -54,6 +54,4 @@
 	ux500_uart_base = (void __iomem *)U8500_UART2_BASE;
 }
 
-#define arch_decomp_wdog() /* nothing to do here */
-
 #endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 3db7782..18f7af3 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -16,14 +16,17 @@
 #include <linux/device.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
+
 #include <mach/hardware.h>
 #include <mach/setup.h>
 
+#include "id.h"
+
 /* This is called from headsmp.S to wakeup the secondary core */
 extern void u8500_secondary_startup(void);
 
@@ -91,7 +94,7 @@
 	 */
 	write_pen_release(cpu_logical_map(cpu));
 
-	smp_send_reschedule(cpu);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -155,8 +158,6 @@
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 875309a..a6af0b8 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -17,6 +17,8 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#include "id.h"
+
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
 			      U8500_TWD_BASE, IRQ_LOCALTIMER);
@@ -46,7 +48,7 @@
 	{ },
 };
 
-static void __init ux500_timer_init(void)
+void __init ux500_timer_init(void)
 {
 	void __iomem *mtu_timer_base;
 	void __iomem *prcmu_timer_base;
@@ -99,14 +101,3 @@
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
 	ux500_twd_init();
 }
-
-static void ux500_timer_reset(void)
-{
-	nmdk_clkevt_reset();
-	nmdk_clksrc_reset();
-}
-
-struct sys_timer ux500_timer = {
-	.init		= ux500_timer_init,
-	.resume		= ux500_timer_reset,
-};
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 43478c2..25160ae 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -32,6 +32,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-vic.h>
 #include <linux/irqchip/versatile-fpga.h>
 #include <linux/gfp.h>
 #include <linux/clkdev.h>
@@ -41,7 +42,6 @@
 #include <asm/irq.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
@@ -783,7 +783,7 @@
 /*
  * Set up timer interrupt, and return the current time in seconds.
  */
-static void __init versatile_timer_init(void)
+void __init versatile_timer_init(void)
 {
 	u32 val;
 
@@ -810,8 +810,3 @@
 	sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
 	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
 }
-
-struct sys_timer versatile_timer = {
-	.init		= versatile_timer_init,
-};
-
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index 683e607..5c1b87d 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -29,7 +29,7 @@
 extern void __init versatile_init_early(void);
 extern void __init versatile_init_irq(void);
 extern void __init versatile_map_io(void);
-extern struct sys_timer versatile_timer;
+extern void versatile_timer_init(void);
 extern void versatile_restart(char, const char *);
 extern unsigned int mmc_status(struct device *dev);
 #ifdef CONFIG_OF
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
index 3dd0048..986e3d3 100644
--- a/arch/arm/mach-versatile/include/mach/uncompress.h
+++ b/arch/arm/mach-versatile/include/mach/uncompress.h
@@ -43,4 +43,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index 98f6549..1caef10 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -26,7 +26,6 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
@@ -39,8 +38,7 @@
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &versatile_timer,
+	.init_time	= versatile_timer_init,
 	.init_machine	= versatile_init,
 	.restart	= versatile_restart,
 MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index ae5ad3c..2558f2e 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -46,8 +45,7 @@
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &versatile_timer,
+	.init_time	= versatile_timer_init,
 	.init_machine	= versatile_dt_init,
 	.dt_compat	= versatile_dt_match,
 	.restart	= versatile_restart,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 1973833..611d140 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -27,7 +27,6 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/hardware/vic.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -107,8 +106,7 @@
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &versatile_timer,
+	.init_time	= versatile_timer_init,
 	.init_machine	= versatile_pb_init,
 	.restart	= versatile_restart,
 MACHINE_END
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 60838dd..6f34497 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -10,10 +10,10 @@
 #include <linux/amba/clcd.h>
 #include <linux/clkdev.h>
 #include <linux/vexpress.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
 
@@ -182,8 +182,6 @@
 
 	for (i = 0; i < ncores; ++i)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index c5d70de..dc1ace5 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -16,7 +16,6 @@
 #include <linux/vexpress.h>
 
 #include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 
 #include <mach/motherboard.h>
@@ -128,8 +127,6 @@
 
 	for (i = 0; i < ncores; ++i)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 011661a..915683c 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -7,6 +7,7 @@
 #include <linux/io.h>
 #include <linux/smp.h>
 #include <linux/init.h>
+#include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
@@ -30,7 +31,6 @@
 #include <asm/mach/time.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/timer-sp.h>
 
 #include <mach/ct-ca9x4.h>
@@ -291,10 +291,6 @@
 	v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
 }
 
-static struct sys_timer v2m_timer = {
-	.init	= v2m_timer_init,
-};
-
 static void __init v2m_init_early(void)
 {
 	if (ct_desc->init_early)
@@ -376,8 +372,7 @@
 	.map_io		= v2m_map_io,
 	.init_early	= v2m_init_early,
 	.init_irq	= v2m_init_irq,
-	.timer		= &v2m_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= v2m_timer_init,
 	.init_machine	= v2m_init,
 	.restart	= vexpress_restart,
 MACHINE_END
@@ -434,16 +429,6 @@
 	}
 }
 
-static  struct of_device_id vexpress_irq_match[] __initdata = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{}
-};
-
-static void __init v2m_dt_init_irq(void)
-{
-	of_irq_init(vexpress_irq_match);
-}
-
 static void __init v2m_dt_timer_init(void)
 {
 	struct device_node *node = NULL;
@@ -468,10 +453,6 @@
 				24000000);
 }
 
-static struct sys_timer v2m_dt_timer = {
-	.init = v2m_dt_timer_init,
-};
-
 static const struct of_device_id v2m_dt_bus_match[] __initconst = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "arm,amba-bus", },
@@ -497,9 +478,8 @@
 	.smp		= smp_ops(vexpress_smp_ops),
 	.map_io		= v2m_dt_map_io,
 	.init_early	= v2m_dt_init_early,
-	.init_irq	= v2m_dt_init_irq,
-	.timer		= &v2m_dt_timer,
+	.init_irq	= irqchip_init,
+	.init_time	= v2m_dt_timer_init,
 	.init_machine	= v2m_dt_init,
-	.handle_irq	= gic_handle_irq,
 	.restart	= vexpress_restart,
 MACHINE_END
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 2ed0b7d..9adcb9e 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -4,9 +4,10 @@
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_OF
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
+	select VT8500_TIMER
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index e035251..92ceb24 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_ARCH_VT8500) += irq.o timer.o vt8500.o
+obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
index 6f2b843..77611a6 100644
--- a/arch/arm/mach-vt8500/common.h
+++ b/arch/arm/mach-vt8500/common.h
@@ -18,7 +18,6 @@
 
 #include <linux/of.h>
 
-void __init vt8500_timer_init(void);
 int __init vt8500_irq_init(struct device_node *node,
 				struct device_node *parent);
 
diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h
index e6e81fd..5b4f19e 100644
--- a/arch/arm/mach-vt8500/include/mach/uncompress.h
+++ b/arch/arm/mach-vt8500/include/mach/uncompress.h
@@ -34,4 +34,3 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 3c66d48..fe99b70 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/clocksource.h>
 #include <linux/io.h>
 #include <linux/pm.h>
 
@@ -175,10 +176,6 @@
 	of_irq_init(vt8500_irq_match);
 };
 
-static struct sys_timer vt8500_timer = {
-	.init = vt8500_timer_init,
-};
-
 static const char * const vt8500_dt_compat[] = {
 	"via,vt8500",
 	"wm,wm8650",
@@ -189,8 +186,8 @@
 	.dt_compat	= vt8500_dt_compat,
 	.map_io		= vt8500_map_io,
 	.init_irq	= vt8500_init_irq,
-	.timer		= &vt8500_timer,
 	.init_machine	= vt8500_init,
+	.init_time	= clocksource_of_init,
 	.restart	= vt8500_restart,
 	.handle_irq	= vt8500_handle_irq,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h
index 0313021..4b7c324 100644
--- a/arch/arm/mach-w90x900/include/mach/uncompress.h
+++ b/arch/arm/mach-w90x900/include/mach/uncompress.h
@@ -24,8 +24,6 @@
 #include <mach/map.h>
 #include <linux/serial_reg.h>
 
-#define arch_decomp_wdog()
-
 #define TX_DONE	(UART_LSR_TEMT | UART_LSR_THRE)
 static volatile u32 * const uart_base = (u32 *)UART0_PA;
 
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index b4243e4..92f1c97 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -37,6 +37,6 @@
 	.map_io		= nuc910evb_map_io,
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc910evb_init,
-	.timer		= &nuc900_timer,
+	.init_time	= nuc900_timer_init,
 	.restart	= nuc9xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 500fe59..26f7189 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -40,6 +40,6 @@
 	.map_io		= nuc950evb_map_io,
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc950evb_init,
-	.timer		= &nuc900_timer,
+	.init_time	= nuc900_timer_init,
 	.restart	= nuc9xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index cbb3adc..9b4e73f 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -37,6 +37,6 @@
 	.map_io		= nuc960evb_map_io,
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc960evb_init,
-	.timer		= &nuc900_timer,
+	.init_time	= nuc900_timer_init,
 	.restart	= nuc9xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc9xx.h b/arch/arm/mach-w90x900/nuc9xx.h
index 91acb40..88ef4b2 100644
--- a/arch/arm/mach-w90x900/nuc9xx.h
+++ b/arch/arm/mach-w90x900/nuc9xx.h
@@ -15,10 +15,9 @@
  *
  */
 struct map_desc;
-struct sys_timer;
 
 /* core initialisation functions */
 
 extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+extern void nuc900_timer_init(void);
 extern void nuc9xx_restart(char, const char *);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index fa27c49..30fbca8 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -91,7 +91,6 @@
 
 static struct clock_event_device nuc900_clockevent_device = {
 	.name		= "nuc900-timer0",
-	.shift		= 32,
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= nuc900_clockevent_setmode,
 	.set_next_event	= nuc900_clockevent_setnextevent,
@@ -133,15 +132,10 @@
 	__raw_writel(RESETINT, REG_TISR);
 	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
 
-	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
-					nuc900_clockevent_device.shift);
-	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
-					&nuc900_clockevent_device);
-	nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
-					&nuc900_clockevent_device);
 	nuc900_clockevent_device.cpumask = cpumask_of(0);
 
-	clockevents_register_device(&nuc900_clockevent_device);
+	clockevents_config_and_register(&nuc900_clockevent_device, rate,
+					0xf, 0xffffffff);
 }
 
 static void __init nuc900_clocksource_init(void)
@@ -167,12 +161,8 @@
 		TDR_SHIFT, clocksource_mmio_readl_down);
 }
 
-static void __init nuc900_timer_init(void)
+void __init nuc900_timer_init(void)
 {
 	nuc900_clocksource_init();
 	nuc900_clockevents_init();
 }
-
-struct sys_timer nuc900_timer = {
-	.init		= nuc900_timer_init,
-};
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index e16d4be..5c89832 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -24,6 +24,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
+#include <linux/irqchip.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -31,7 +32,6 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
@@ -55,19 +55,6 @@
 	of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
 }
 
-static struct of_device_id irq_match[] __initdata = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{ }
-};
-
-/**
- * xilinx_irq_init() - Interrupt controller initialization for the GIC.
- */
-static void __init xilinx_irq_init(void)
-{
-	of_irq_init(irq_match);
-}
-
 #define SCU_PERIPH_PHYS		0xF8F00000
 #define SCU_PERIPH_SIZE		SZ_8K
 #define SCU_PERIPH_VIRT		(VMALLOC_END - SCU_PERIPH_SIZE)
@@ -90,16 +77,9 @@
 
 	xilinx_zynq_clocks_init(slcr);
 
-	xttcpss_timer_init();
+	xttcps_timer_init();
 }
 
-/*
- * Instantiate and initialize the system timer structure
- */
-static struct sys_timer xttcpss_sys_timer = {
-	.init		= xilinx_zynq_timer_init,
-};
-
 /**
  * xilinx_map_io() - Create memory mappings needed for early I/O.
  */
@@ -117,9 +97,8 @@
 
 MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.map_io		= xilinx_map_io,
-	.init_irq	= xilinx_irq_init,
-	.handle_irq	= gic_handle_irq,
+	.init_irq	= irqchip_init,
 	.init_machine	= xilinx_init_machine,
-	.timer		= &xttcpss_sys_timer,
+	.init_time	= xilinx_zynq_timer_init,
 	.dt_compat	= xilinx_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 954b91c..8b4dbba 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -17,6 +17,6 @@
 #ifndef __MACH_ZYNQ_COMMON_H__
 #define __MACH_ZYNQ_COMMON_H__
 
-void __init xttcpss_timer_init(void);
+void __init xttcps_timer_init(void);
 
 #endif
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
index de3df28..f9fbc9c 100644
--- a/arch/arm/mach-zynq/timer.c
+++ b/arch/arm/mach-zynq/timer.c
@@ -15,39 +15,29 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/clocksource.h>
 #include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/slab.h>
 #include <linux/clk-provider.h>
-
 #include "common.h"
 
 /*
  * Timer Register Offset Definitions of Timer 1, Increment base address by 4
  * and use same offsets for Timer 2
  */
-#define XTTCPSS_CLK_CNTRL_OFFSET	0x00 /* Clock Control Reg, RW */
-#define XTTCPSS_CNT_CNTRL_OFFSET	0x0C /* Counter Control Reg, RW */
-#define XTTCPSS_COUNT_VAL_OFFSET	0x18 /* Counter Value Reg, RO */
-#define XTTCPSS_INTR_VAL_OFFSET		0x24 /* Interval Count Reg, RW */
-#define XTTCPSS_MATCH_1_OFFSET		0x30 /* Match 1 Value Reg, RW */
-#define XTTCPSS_MATCH_2_OFFSET		0x3C /* Match 2 Value Reg, RW */
-#define XTTCPSS_MATCH_3_OFFSET		0x48 /* Match 3 Value Reg, RW */
-#define XTTCPSS_ISR_OFFSET		0x54 /* Interrupt Status Reg, RO */
-#define XTTCPSS_IER_OFFSET		0x60 /* Interrupt Enable Reg, RW */
+#define XTTCPS_CLK_CNTRL_OFFSET		0x00 /* Clock Control Reg, RW */
+#define XTTCPS_CNT_CNTRL_OFFSET		0x0C /* Counter Control Reg, RW */
+#define XTTCPS_COUNT_VAL_OFFSET		0x18 /* Counter Value Reg, RO */
+#define XTTCPS_INTR_VAL_OFFSET		0x24 /* Interval Count Reg, RW */
+#define XTTCPS_ISR_OFFSET		0x54 /* Interrupt Status Reg, RO */
+#define XTTCPS_IER_OFFSET		0x60 /* Interrupt Enable Reg, RW */
 
-#define XTTCPSS_CNT_CNTRL_DISABLE_MASK	0x1
+#define XTTCPS_CNT_CNTRL_DISABLE_MASK	0x1
 
-/* Setup the timers to use pre-scaling, using a fixed value for now that will
+/*
+ * Setup the timers to use pre-scaling, using a fixed value for now that will
  * work across most input frequency, but it may need to be more dynamic
  */
 #define PRESCALE_EXPONENT	11	/* 2 ^ PRESCALE_EXPONENT = PRESCALE */
@@ -57,72 +47,73 @@
 #define CNT_CNTRL_RESET		(1<<4)
 
 /**
- * struct xttcpss_timer - This definition defines local timer structure
+ * struct xttcps_timer - This definition defines local timer structure
  *
  * @base_addr:	Base address of timer
  **/
-struct xttcpss_timer {
+struct xttcps_timer {
 	void __iomem	*base_addr;
 };
 
-struct xttcpss_timer_clocksource {
-	struct xttcpss_timer	xttc;
+struct xttcps_timer_clocksource {
+	struct xttcps_timer	xttc;
 	struct clocksource	cs;
 };
 
-#define to_xttcpss_timer_clksrc(x) \
-		container_of(x, struct xttcpss_timer_clocksource, cs)
+#define to_xttcps_timer_clksrc(x) \
+		container_of(x, struct xttcps_timer_clocksource, cs)
 
-struct xttcpss_timer_clockevent {
-	struct xttcpss_timer		xttc;
+struct xttcps_timer_clockevent {
+	struct xttcps_timer		xttc;
 	struct clock_event_device	ce;
 	struct clk			*clk;
 };
 
-#define to_xttcpss_timer_clkevent(x) \
-		container_of(x, struct xttcpss_timer_clockevent, ce)
+#define to_xttcps_timer_clkevent(x) \
+		container_of(x, struct xttcps_timer_clockevent, ce)
 
 /**
- * xttcpss_set_interval - Set the timer interval value
+ * xttcps_set_interval - Set the timer interval value
  *
  * @timer:	Pointer to the timer instance
  * @cycles:	Timer interval ticks
  **/
-static void xttcpss_set_interval(struct xttcpss_timer *timer,
+static void xttcps_set_interval(struct xttcps_timer *timer,
 					unsigned long cycles)
 {
 	u32 ctrl_reg;
 
 	/* Disable the counter, set the counter value  and re-enable counter */
-	ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
-	ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
-	__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+	ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
+	ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
+	__raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 
-	__raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET);
+	__raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET);
 
-	/* Reset the counter (0x10) so that it starts from 0, one-shot
-	   mode makes this needed for timing to be right. */
+	/*
+	 * Reset the counter (0x10) so that it starts from 0, one-shot
+	 * mode makes this needed for timing to be right.
+	 */
 	ctrl_reg |= CNT_CNTRL_RESET;
-	ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
-	__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+	ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
+	__raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 }
 
 /**
- * xttcpss_clock_event_interrupt - Clock event timer interrupt handler
+ * xttcps_clock_event_interrupt - Clock event timer interrupt handler
  *
  * @irq:	IRQ number of the Timer
- * @dev_id:	void pointer to the xttcpss_timer instance
+ * @dev_id:	void pointer to the xttcps_timer instance
  *
  * returns: Always IRQ_HANDLED - success
  **/
-static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
+static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id)
 {
-	struct xttcpss_timer_clockevent *xttce = dev_id;
-	struct xttcpss_timer *timer = &xttce->xttc;
+	struct xttcps_timer_clockevent *xttce = dev_id;
+	struct xttcps_timer *timer = &xttce->xttc;
 
 	/* Acknowledge the interrupt and call event handler */
-	__raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
-			timer->base_addr + XTTCPSS_ISR_OFFSET);
+	__raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET);
 
 	xttce->ce.event_handler(&xttce->ce);
 
@@ -136,46 +127,46 @@
  **/
 static cycle_t __xttc_clocksource_read(struct clocksource *cs)
 {
-	struct xttcpss_timer *timer = &to_xttcpss_timer_clksrc(cs)->xttc;
+	struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc;
 
 	return (cycle_t)__raw_readl(timer->base_addr +
-				XTTCPSS_COUNT_VAL_OFFSET);
+				XTTCPS_COUNT_VAL_OFFSET);
 }
 
 /**
- * xttcpss_set_next_event - Sets the time interval for next event
+ * xttcps_set_next_event - Sets the time interval for next event
  *
  * @cycles:	Timer interval ticks
  * @evt:	Address of clock event instance
  *
  * returns: Always 0 - success
  **/
-static int xttcpss_set_next_event(unsigned long cycles,
+static int xttcps_set_next_event(unsigned long cycles,
 					struct clock_event_device *evt)
 {
-	struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt);
-	struct xttcpss_timer *timer = &xttce->xttc;
+	struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
+	struct xttcps_timer *timer = &xttce->xttc;
 
-	xttcpss_set_interval(timer, cycles);
+	xttcps_set_interval(timer, cycles);
 	return 0;
 }
 
 /**
- * xttcpss_set_mode - Sets the mode of timer
+ * xttcps_set_mode - Sets the mode of timer
  *
  * @mode:	Mode to be set
  * @evt:	Address of clock event instance
  **/
-static void xttcpss_set_mode(enum clock_event_mode mode,
+static void xttcps_set_mode(enum clock_event_mode mode,
 					struct clock_event_device *evt)
 {
-	struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt);
-	struct xttcpss_timer *timer = &xttce->xttc;
+	struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
+	struct xttcps_timer *timer = &xttce->xttc;
 	u32 ctrl_reg;
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		xttcpss_set_interval(timer,
+		xttcps_set_interval(timer,
 				     DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk),
 						       PRESCALE * HZ));
 		break;
@@ -183,17 +174,17 @@
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		ctrl_reg = __raw_readl(timer->base_addr +
-					XTTCPSS_CNT_CNTRL_OFFSET);
-		ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+					XTTCPS_CNT_CNTRL_OFFSET);
+		ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
 		__raw_writel(ctrl_reg,
-				timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+				timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		ctrl_reg = __raw_readl(timer->base_addr +
-					XTTCPSS_CNT_CNTRL_OFFSET);
-		ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+					XTTCPS_CNT_CNTRL_OFFSET);
+		ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
 		__raw_writel(ctrl_reg,
-				timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+				timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 		break;
 	}
 }
@@ -201,7 +192,7 @@
 static void __init zynq_ttc_setup_clocksource(struct device_node *np,
 					     void __iomem *base)
 {
-	struct xttcpss_timer_clocksource *ttccs;
+	struct xttcps_timer_clocksource *ttccs;
 	struct clk *clk;
 	int err;
 	u32 reg;
@@ -230,11 +221,11 @@
 	ttccs->cs.mask = CLOCKSOURCE_MASK(16);
 	ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
-	__raw_writel(0x0,  ttccs->xttc.base_addr + XTTCPSS_IER_OFFSET);
+	__raw_writel(0x0,  ttccs->xttc.base_addr + XTTCPS_IER_OFFSET);
 	__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
-		     ttccs->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET);
+		     ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
 	__raw_writel(CNT_CNTRL_RESET,
-		     ttccs->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+		     ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 
 	err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE);
 	if (WARN_ON(err))
@@ -244,7 +235,7 @@
 static void __init zynq_ttc_setup_clockevent(struct device_node *np,
 					    void __iomem *base)
 {
-	struct xttcpss_timer_clockevent *ttcce;
+	struct xttcps_timer_clockevent *ttcce;
 	int err, irq;
 	u32 reg;
 
@@ -272,17 +263,18 @@
 
 	ttcce->ce.name = np->name;
 	ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	ttcce->ce.set_next_event = xttcpss_set_next_event;
-	ttcce->ce.set_mode = xttcpss_set_mode;
+	ttcce->ce.set_next_event = xttcps_set_next_event;
+	ttcce->ce.set_mode = xttcps_set_mode;
 	ttcce->ce.rating = 200;
 	ttcce->ce.irq = irq;
+	ttcce->ce.cpumask = cpu_possible_mask;
 
-	__raw_writel(0x23, ttcce->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+	__raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 	__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
-		     ttcce->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET);
-	__raw_writel(0x1,  ttcce->xttc.base_addr + XTTCPSS_IER_OFFSET);
+		     ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
+	__raw_writel(0x1,  ttcce->xttc.base_addr + XTTCPS_IER_OFFSET);
 
-	err = request_irq(irq, xttcpss_clock_event_interrupt, IRQF_TIMER,
+	err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER,
 			  np->name, ttcce);
 	if (WARN_ON(err))
 		return;
@@ -301,12 +293,12 @@
 };
 
 /**
- * xttcpss_timer_init - Initialize the timer
+ * xttcps_timer_init - Initialize the timer
  *
  * Initializes the timer hardware and register the clock source and clock event
  * timers with Linux kernal timer framework
  **/
-void __init xttcpss_timer_init(void)
+void __init xttcps_timer_init(void)
 {
 	struct device_node *np;
 
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index cbfbbe4..837a2d5 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -156,14 +156,9 @@
 	write_tmr0(timer_ctl & ~IOP_TMR_EN);
 	write_tisr(1);
 	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
-	clockevents_calc_mult_shift(&iop_clockevent,
-				    tick_rate, IOP_MIN_RANGE);
-	iop_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &iop_clockevent);
-	iop_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xf, &iop_clockevent);
 	iop_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&iop_clockevent);
+	clockevents_config_and_register(&iop_clockevent, tick_rate,
+					0xf, 0xfffffffe);
 
 	/*
 	 * Set up free-running clocksource timer 1.
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 0f4fa86..5d5ac0f 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -156,7 +156,6 @@
 static struct clock_event_device orion_clkevt = {
 	.name		= "orion_tick",
 	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.shift		= 32,
 	.rating		= 300,
 	.set_next_event	= orion_clkevt_next_event,
 	.set_mode	= orion_clkevt_mode,
@@ -221,9 +220,6 @@
 	 * Setup clockevent timer (interrupt-driven).
 	 */
 	setup_irq(irq, &orion_timer_irq);
-	orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift);
-	orion_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe, &orion_clkevt);
-	orion_clkevt.min_delta_ns = clockevent_delta2ns(1, &orion_clkevt);
 	orion_clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&orion_clkevt);
+	clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
 }
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
deleted file mode 100644
index eef3b6a..0000000
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_S3C24XX
-	bool
-	depends on ARCH_S3C24XX
-	default y
-	select ARCH_REQUIRE_GPIOLIB
-	select NO_IOPORT
-	select S3C_DEV_NAND
-	help
-	  Base platform code for any Samsung S3C24XX device
-
-if PLAT_S3C24XX
-
-# low-level serial option nodes
-
-config CPU_LLSERIAL_S3C2410_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-	bool
-	help
-	  Selected if there is an S3C2410 (or register compatible) serial
-	  low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-	bool
-	help
-	  Selected if there is an S3C2440 (or register compatible) serial
-	  low-level implementation needed
-
-# code that is shared between a number of the s3c24xx implementations
-
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors which
-	  is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
-	bool
-	help
-	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
-# gpio configurations
-
-config S3C24XX_GPIO_EXTRA
-	int
-	default 128 if S3C24XX_GPIO_EXTRA128
-	default 64 if S3C24XX_GPIO_EXTRA64
-	default 16 if ARCH_H1940
-	default 0
-
-config S3C24XX_GPIO_EXTRA64
-	bool
-	help
-	  Add an extra 64 gpio numbers to the available GPIO pool. This is
-	  available for boards that need extra gpios for external devices.
-
-config S3C24XX_GPIO_EXTRA128
-	bool
-	help
-	  Add an extra 128 gpio numbers to the available GPIO pool. This is
-	  available for boards that need extra gpios for external devices.
-
-config S3C24XX_DMA
-	bool "S3C2410 DMA support"
-	depends on ARCH_S3C24XX
-	select S3C_DMA
-	help
-	  S3C2410 DMA support. This is needed for drivers like sound which
-	  use the S3C2410's DMA system to move data to and from the
-	  peripheral blocks.
-
-config S3C2410_DMA_DEBUG
-	bool "S3C2410 DMA support debug"
-	depends on ARCH_S3C24XX && S3C2410_DMA
-	help
-	  Enable debugging output for the DMA code. This option sends info
-	  to the kernel log, at priority KERN_DEBUG.
-
-# common code for s3c24xx based machines, such as the SMDKs.
-
-# cpu frequency items common between s3c2410 and s3c2440/s3c2442
-
-config S3C2410_IOTIMING
-	bool
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Internal node to select io timing code that is common to the s3c2410
-	  and s3c2440/s3c2442 cpu frequency support.
-
-config S3C2410_CPUFREQ_UTILS
-	bool
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Internal node to select timing code that is common to the s3c2410
-	  and s3c2440/s3c244 cpu frequency support.
-
-# cpu frequency support common to s3c2412, s3c2413 and s3c2442
-
-config S3C2412_IOTIMING
-	bool
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
-	help
-	  Intel node to select io timing code that is common to the s3c2412
-	  and the s3c2443.
-
-endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
deleted file mode 100644
index 9f60549c..0000000
--- a/arch/arm/plat-s3c24xx/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-# arch/arm/plat-s3c24xx/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-
-# Core files
-
-obj-y				+= irq.o
-obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
-
-obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
-
-# Architecture dependent builds
-
-obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
-obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
-obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
-obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
-obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
deleted file mode 100644
index fe57bbb..0000000
--- a/arch/arm/plat-s3c24xx/irq.c
+++ /dev/null
@@ -1,676 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <plat/regs-irqtype.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-static void
-s3c_irq_mask(struct irq_data *data)
-{
-	unsigned int irqno = data->irq - IRQ_EINT0;
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	mask |= 1UL << irqno;
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-static inline void
-s3c_irq_ack(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c_irq_maskack(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask|bitval, S3C2410_INTMSK);
-
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-
-static void
-s3c_irq_unmask(struct irq_data *data)
-{
-	unsigned int irqno = data->irq;
-	unsigned long mask;
-
-	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
-		irqdbf2("s3c_irq_unmask %d\n", irqno);
-
-	irqno -= IRQ_EINT0;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	mask &= ~(1UL << irqno);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-struct irq_chip s3c_irq_level_chip = {
-	.name		= "s3c-level",
-	.irq_ack	= s3c_irq_maskack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake
-};
-
-struct irq_chip s3c_irq_chip = {
-	.name		= "s3c",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake
-};
-
-static void
-s3c_irqext_mask(struct irq_data *data)
-{
-	unsigned int irqno = data->irq - EXTINT_OFF;
-	unsigned long mask;
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask |= ( 1UL << irqno);
-	__raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-static void
-s3c_irqext_ack(struct irq_data *data)
-{
-	unsigned long req;
-	unsigned long bit;
-	unsigned long mask;
-
-	bit = 1UL << (data->irq - EXTINT_OFF);
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-
-	__raw_writel(bit, S3C24XX_EINTPEND);
-
-	req = __raw_readl(S3C24XX_EINTPEND);
-	req &= ~mask;
-
-	/* not sure if we should be acking the parent irq... */
-
-	if (data->irq <= IRQ_EINT7) {
-		if ((req & 0xf0) == 0)
-			s3c_irq_ack(irq_get_irq_data(IRQ_EINT4t7));
-	} else {
-		if ((req >> 8) == 0)
-			s3c_irq_ack(irq_get_irq_data(IRQ_EINT8t23));
-	}
-}
-
-static void
-s3c_irqext_unmask(struct irq_data *data)
-{
-	unsigned int irqno = data->irq - EXTINT_OFF;
-	unsigned long mask;
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask &= ~(1UL << irqno);
-	__raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-int
-s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-	unsigned long newvalue = 0, value;
-
-	if ((data->irq >= IRQ_EINT0) && (data->irq <= IRQ_EINT3)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->irq - IRQ_EINT0) * 2;
-		extint_offset = (data->irq - IRQ_EINT0) * 4;
-	} else if ((data->irq >= IRQ_EINT4) && (data->irq <= IRQ_EINT7)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->irq - (EXTINT_OFF)) * 2;
-		extint_offset = (data->irq - (EXTINT_OFF)) * 4;
-	} else if ((data->irq >= IRQ_EINT8) && (data->irq <= IRQ_EINT15)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (data->irq - IRQ_EINT8) * 2;
-		extint_offset = (data->irq - IRQ_EINT8) * 4;
-	} else if ((data->irq >= IRQ_EINT16) && (data->irq <= IRQ_EINT23)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (data->irq - IRQ_EINT8) * 2;
-		extint_offset = (data->irq - IRQ_EINT16) * 4;
-	} else {
-		return -1;
-	}
-
-	/* Set the GPIO to external interrupt mode */
-	value = __raw_readl(gpcon_reg);
-	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-	__raw_writel(value, gpcon_reg);
-
-	/* Set the external interrupt to pointed trigger type */
-	switch (type)
-	{
-		case IRQ_TYPE_NONE:
-			printk(KERN_WARNING "No edge setting!\n");
-			break;
-
-		case IRQ_TYPE_EDGE_RISING:
-			newvalue = S3C2410_EXTINT_RISEEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_FALLING:
-			newvalue = S3C2410_EXTINT_FALLEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_BOTH:
-			newvalue = S3C2410_EXTINT_BOTHEDGE;
-			break;
-
-		case IRQ_TYPE_LEVEL_LOW:
-			newvalue = S3C2410_EXTINT_LOWLEV;
-			break;
-
-		case IRQ_TYPE_LEVEL_HIGH:
-			newvalue = S3C2410_EXTINT_HILEV;
-			break;
-
-		default:
-			printk(KERN_ERR "No such irq type %d", type);
-			return -1;
-	}
-
-	value = __raw_readl(extint_reg);
-	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-	__raw_writel(value, extint_reg);
-
-	return 0;
-}
-
-static struct irq_chip s3c_irqext_chip = {
-	.name		= "s3c-ext",
-	.irq_mask	= s3c_irqext_mask,
-	.irq_unmask	= s3c_irqext_unmask,
-	.irq_ack	= s3c_irqext_ack,
-	.irq_set_type	= s3c_irqext_type,
-	.irq_set_wake	= s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-	.name		= "s3c-ext0",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake,
-	.irq_set_type	= s3c_irqext_type,
-};
-
-/* mask values for the parent registers for each of the interrupt types */
-
-#define INTMSK_UART0	 (1UL << (IRQ_UART0 - IRQ_EINT0))
-#define INTMSK_UART1	 (1UL << (IRQ_UART1 - IRQ_EINT0))
-#define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
-#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-
-
-/* UART0 */
-
-static void
-s3c_irq_uart0_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART0, 7);
-}
-
-static void
-s3c_irq_uart0_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART0);
-}
-
-static void
-s3c_irq_uart0_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART0, 7);
-}
-
-static struct irq_chip s3c_irq_uart0 = {
-	.name		= "s3c-uart0",
-	.irq_mask	= s3c_irq_uart0_mask,
-	.irq_unmask	= s3c_irq_uart0_unmask,
-	.irq_ack	= s3c_irq_uart0_ack,
-};
-
-/* UART1 */
-
-static void
-s3c_irq_uart1_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART1, 7 << 3);
-}
-
-static void
-s3c_irq_uart1_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART1);
-}
-
-static void
-s3c_irq_uart1_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART1, 7 << 3);
-}
-
-static struct irq_chip s3c_irq_uart1 = {
-	.name		= "s3c-uart1",
-	.irq_mask	= s3c_irq_uart1_mask,
-	.irq_unmask	= s3c_irq_uart1_unmask,
-	.irq_ack	= s3c_irq_uart1_ack,
-};
-
-/* UART2 */
-
-static void
-s3c_irq_uart2_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART2, 7 << 6);
-}
-
-static void
-s3c_irq_uart2_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART2);
-}
-
-static void
-s3c_irq_uart2_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART2, 7 << 6);
-}
-
-static struct irq_chip s3c_irq_uart2 = {
-	.name		= "s3c-uart2",
-	.irq_mask	= s3c_irq_uart2_mask,
-	.irq_unmask	= s3c_irq_uart2_unmask,
-	.irq_ack	= s3c_irq_uart2_ack,
-};
-
-/* ADC and Touchscreen */
-
-static void
-s3c_irq_adc_mask(struct irq_data *d)
-{
-	s3c_irqsub_mask(d->irq, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static void
-s3c_irq_adc_unmask(struct irq_data *d)
-{
-	s3c_irqsub_unmask(d->irq, INTMSK_ADCPARENT);
-}
-
-static void
-s3c_irq_adc_ack(struct irq_data *d)
-{
-	s3c_irqsub_ack(d->irq, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static struct irq_chip s3c_irq_adc = {
-	.name		= "s3c-adc",
-	.irq_mask	= s3c_irq_adc_mask,
-	.irq_unmask	= s3c_irq_adc_unmask,
-	.irq_ack	= s3c_irq_adc_ack,
-};
-
-/* irq demux for adc */
-static void s3c_irq_demux_adc(unsigned int irq,
-			      struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-	unsigned int offset = 9;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= offset;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			generic_handle_irq(IRQ_TC);
-		}
-		if (subsrc & 2) {
-			generic_handle_irq(IRQ_ADC);
-		}
-	}
-}
-
-static void s3c_irq_demux_uart(unsigned int start)
-{
-	unsigned int subsrc, submsk;
-	unsigned int offset = start - IRQ_S3CUART_RX0;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
-		start, offset, subsrc, submsk);
-
-	subsrc &= ~submsk;
-	subsrc >>= offset;
-	subsrc &= 7;
-
-	if (subsrc != 0) {
-		if (subsrc & 1)
-			generic_handle_irq(start);
-
-		if (subsrc & 2)
-			generic_handle_irq(start+1);
-
-		if (subsrc & 4)
-			generic_handle_irq(start+2);
-	}
-}
-
-/* uart demux entry points */
-
-static void
-s3c_irq_demux_uart0(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX0);
-}
-
-static void
-s3c_irq_demux_uart1(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX1);
-}
-
-static void
-s3c_irq_demux_uart2(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX2);
-}
-
-static void
-s3c_irq_demux_extint8(unsigned int irq,
-		      struct irq_desc *desc)
-{
-	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-	eintpnd &= ~eintmsk;
-	eintpnd &= ~0xff;	/* ignore lower irqs */
-
-	/* we may as well handle all the pending IRQs here */
-
-	while (eintpnd) {
-		irq = __ffs(eintpnd);
-		eintpnd &= ~(1<<irq);
-
-		irq += (IRQ_EINT4 - 4);
-		generic_handle_irq(irq);
-	}
-
-}
-
-static void
-s3c_irq_demux_extint4t7(unsigned int irq,
-			struct irq_desc *desc)
-{
-	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-	eintpnd &= ~eintmsk;
-	eintpnd &= 0xff;	/* only lower irqs */
-
-	/* we may as well handle all the pending IRQs here */
-
-	while (eintpnd) {
-		irq = __ffs(eintpnd);
-		eintpnd &= ~(1<<irq);
-
-		irq += (IRQ_EINT4 - 4);
-
-		generic_handle_irq(irq);
-	}
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- */
-int s3c24xx_set_fiq(unsigned int irq, bool on)
-{
-	u32 intmod;
-	unsigned offs;
-
-	if (on) {
-		offs = irq - FIQ_START;
-		if (offs > 31)
-			return -EINVAL;
-
-		intmod = 1 << offs;
-	} else {
-		intmod = 0;
-	}
-
-	__raw_writel(intmod, S3C2410_INTMOD);
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-void __init s3c24xx_init_irq(void)
-{
-	unsigned long pend;
-	unsigned long last;
-	int irqno;
-	int i;
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-
-	/* first, clear all interrupts pending... */
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C24XX_EINTPEND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C24XX_EINTPEND);
-		printk("irq: clearing pending ext status %08x\n", (int)pend);
-		last = pend;
-	}
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_INTPND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C2410_SRCPND);
-		__raw_writel(pend, S3C2410_INTPND);
-		printk("irq: clearing pending status %08x\n", (int)pend);
-		last = pend;
-	}
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_SUBSRCPND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		printk("irq: clearing subpending status %08x\n", (int)pend);
-		__raw_writel(pend, S3C2410_SUBSRCPND);
-		last = pend;
-	}
-
-	/* register the main interrupts */
-
-	irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
-
-	for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
-		/* set all the s3c2410 internal irqs */
-
-		switch (irqno) {
-			/* deal with the special IRQs (cascaded) */
-
-		case IRQ_EINT4t7:
-		case IRQ_EINT8t23:
-		case IRQ_UART0:
-		case IRQ_UART1:
-		case IRQ_UART2:
-		case IRQ_ADCPARENT:
-			irq_set_chip_and_handler(irqno, &s3c_irq_level_chip,
-						 handle_level_irq);
-			break;
-
-		case IRQ_RESERVED6:
-		case IRQ_RESERVED24:
-			/* no IRQ here */
-			break;
-
-		default:
-			//irqdbf("registering irq %d (s3c irq)\n", irqno);
-			irq_set_chip_and_handler(irqno, &s3c_irq_chip,
-						 handle_edge_irq);
-			set_irq_flags(irqno, IRQF_VALID);
-		}
-	}
-
-	/* setup the cascade irq handlers */
-
-	irq_set_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
-	irq_set_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
-
-	irq_set_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
-	irq_set_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
-	irq_set_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
-	irq_set_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
-
-	/* external interrupts */
-
-	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
-		irqdbf("registering irq %d (ext int)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irq_eint0t4,
-					 handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
-		irqdbf("registering irq %d (extended s3c irq)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irqext_chip,
-					 handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	/* register the uart interrupts */
-
-	irqdbf("s3c2410: registering external interrupts\n");
-
-	for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
-		irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irq_uart0,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
-		irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irq_uart1,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
-		irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irq_uart2,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
-		irqdbf("registering irq %d (s3c adc irq)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irq_adc, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	irqdbf("s3c2410: registered interrupt handlers\n");
-}
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index b69e11d..37703ef 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -194,8 +194,7 @@
 
 /* timer for 2410/2440 */
 
-struct sys_timer;
-extern struct sys_timer s3c24xx_timer;
+extern void s3c24xx_timer_init(void);
 
 extern struct syscore_ops s3c2410_pm_syscore_ops;
 extern struct syscore_ops s3c2412_pm_syscore_ops;
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index f7a3ea2..cf5aae5 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -106,7 +106,18 @@
 #else
 /* machine specific code should provide samsung_gpiolib_getchip */
 
-#include <mach/gpio-track.h>
+extern struct samsung_gpio_chip s3c24xx_gpios[];
+
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip;
+
+	if (pin > S3C_GPIO_END)
+		return NULL;
+
+	chip = &s3c24xx_gpios[pin/32];
+	return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
+}
 
 static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
 #endif
diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h
deleted file mode 100644
index d1ecef0..0000000
--- a/arch/arm/plat-samsung/include/plat/gpio-fns.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <plat/gpio-cfg.h>
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 887a0c9..f6fcade 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -109,17 +109,11 @@
 #ifdef CONFIG_PM
 extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
 extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
-extern int s3c24xx_irq_suspend(void);
-extern void s3c24xx_irq_resume(void);
 #else
 #define s3c_irq_wake NULL
 #define s3c_irqext_wake NULL
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
 #endif
 
-extern struct syscore_ops s3c24xx_irq_syscore_ops;
-
 /* PM debug functions */
 
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
index 7178e33..f27399a 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -25,6 +25,7 @@
 
 extern void s3c2416_restart(char mode, const char *cmd);
 
+extern void s3c2416_init_irq(void);
 extern struct syscore_ops s3c2416_irq_syscore_ops;
 
 #else
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index a5b794f..71b88ec 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -25,6 +25,8 @@
 extern  int s3c2443_baseclk_add(void);
 
 extern void s3c2443_restart(char mode, const char *cmd);
+
+extern void s3c2443_init_irq(void);
 #else
 #define s3c2443_init_clocks NULL
 #define s3c2443_init_uarts NULL
diff --git a/arch/arm/plat-samsung/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h
index 3a70aeb..9c96f35 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-time.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-time.h
@@ -36,5 +36,5 @@
 
 extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
 					enum s5p_timer_mode source);
-extern	struct sys_timer s5p_timer;
+extern	void s5p_timer_init(void);
 #endif /* __ASM_PLAT_S5P_TIME_H */
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index 7e068d1..438b248 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -97,33 +97,6 @@
 		*((volatile unsigned int __force *)(ad)) = (d); \
 	} while (0)
 
-/* CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
-*/
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
-
 #ifdef CONFIG_S3C_BOOT_ERROR_RESET
 
 static void arch_decomp_error(const char *x)
@@ -173,7 +146,6 @@
 	 */
 
 	arch_detect_cpu();
-	arch_decomp_wdog_start();
 
 	/* Enable the UART FIFOs if they where not enabled and our
 	 * configuration says we should turn them on.
diff --git a/arch/arm/plat-samsung/s5p-irq-eint.c b/arch/arm/plat-samsung/s5p-irq-eint.c
index 33bd3f3..faa6516 100644
--- a/arch/arm/plat-samsung/s5p-irq-eint.c
+++ b/arch/arm/plat-samsung/s5p-irq-eint.c
@@ -15,8 +15,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <plat/regs-irqtype.h>
 
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
index dfb47d6..103e371 100644
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -13,8 +13,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-
-#include <asm/hardware/vic.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <mach/map.h>
 #include <plat/regs-timer.h>
diff --git a/arch/arm/plat-samsung/s5p-time.c b/arch/arm/plat-samsung/s5p-time.c
index 028b6e8..e92510c 100644
--- a/arch/arm/plat-samsung/s5p-time.c
+++ b/arch/arm/plat-samsung/s5p-time.c
@@ -274,15 +274,8 @@
 	clock_rate = clk_get_rate(tin_event);
 	clock_count_per_tick = clock_rate / HZ;
 
-	clockevents_calc_mult_shift(&time_event_device,
-				    clock_rate, S5PTIMER_MIN_RANGE);
-	time_event_device.max_delta_ns =
-		clockevent_delta2ns(-1, &time_event_device);
-	time_event_device.min_delta_ns =
-		clockevent_delta2ns(1, &time_event_device);
-
 	time_event_device.cpumask = cpumask_of(0);
-	clockevents_register_device(&time_event_device);
+	clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
 
 	irq_number = timer_source.event_id + IRQ_TIMER0;
 	setup_irq(irq_number, &s5p_clock_event_irq);
@@ -393,13 +386,9 @@
 	clk_enable(tin_source);
 }
 
-static void __init s5p_timer_init(void)
+void __init s5p_timer_init(void)
 {
 	s5p_timer_resources();
 	s5p_clockevent_init();
 	s5p_clocksource_init();
 }
-
-struct sys_timer s5p_timer = {
-	.init		= s5p_timer_init,
-};
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
index 60552e2..73defd0 100644
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/mach-types.h>
 
@@ -95,7 +96,7 @@
  * IRQs are disabled before entering here from do_gettimeofday()
  */
 
-static unsigned long s3c2410_gettimeoffset (void)
+static u32 s3c2410_gettimeoffset(void)
 {
 	unsigned long tdone;
 	unsigned long tval;
@@ -120,7 +121,7 @@
 			tdone += timer_startval;
 	}
 
-	return timer_ticks_to_usec(tdone);
+	return timer_ticks_to_usec(tdone) * 1000;
 }
 
 
@@ -271,15 +272,16 @@
 	clk_enable(tin);
 }
 
-static void __init s3c2410_timer_init(void)
+static struct syscore_ops s3c24xx_syscore_ops = {
+	.resume		= s3c2410_timer_setup,
+};
+
+void __init s3c24xx_timer_init(void)
 {
+	arch_gettimeoffset = s3c2410_gettimeoffset;
+
 	s3c2410_timer_resources();
 	s3c2410_timer_setup();
 	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
+	register_syscore_ops(&s3c24xx_syscore_ops);
 }
-
-struct sys_timer s3c24xx_timer = {
-	.init		= s3c2410_timer_init,
-	.offset		= s3c2410_gettimeoffset,
-	.resume		= s3c2410_timer_setup
-};
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 2ce6cb1..51b2dc9 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -38,6 +38,5 @@
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
 
 #endif /* __PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index 03321af..bd5c53c 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -186,15 +186,9 @@
 	tick_rate = clk_get_rate(gpt_clk);
 	tick_rate >>= CTRL_PRESCALER16;
 
-	clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
-
-	clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
-			&clkevt);
-	clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt);
-
 	clkevt.cpumask = cpumask_of(0);
 
-	clockevents_register_device(&clkevt);
+	clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
 
 	setup_irq(irq, &spear_timer_irq);
 }
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index 04ca493..f2ac155 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -14,10 +14,10 @@
 #include <linux/device.h>
 #include <linux/jiffies.h>
 #include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
-#include <asm/hardware/gic.h>
 
 /*
  * Write pen_release in a way that is guaranteed to be visible to all
@@ -79,7 +79,7 @@
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 */
-	gic_raise_softirq(cpumask_of(cpu), 0);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 2310b24..3126b92 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -85,7 +85,7 @@
 /*
  * Should return useconds since last timer tick
  */
-u32 arch_gettimeoffset(void)
+static u32 blackfin_gettimeoffset(void)
 {
 	unsigned long offset;
 	unsigned long clocks_per_jiffy;
@@ -141,6 +141,10 @@
 
 void __init time_init(void)
 {
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+	arch_gettimeoffset = blackfin_gettimeoffset;
+#endif
+
 #ifdef CONFIG_RTC_DRV_BFIN
 	/* [#2663] hack to filter junk RTC values that would cause
 	 * userspace to have to deal with time values greater than
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index bcffcb6..fce7c54 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -55,9 +55,9 @@
 	return ns;
 }
 
-unsigned long do_slow_gettimeoffset(void)
+static u32 cris_v10_gettimeoffset(void)
 {
-	unsigned long count;
+	u32 count;
 
 	/* The timer interrupt comes from Etrax timer 0. In order to get
 	 * better precision, we check the current value. It might have
@@ -65,8 +65,8 @@
 	 */
 	count = *R_TIMER0_DATA;
 
-	/* Convert timer value to usec */
-	return (TIMER0_DIV - count) * ((NSEC_PER_SEC/1000)/HZ)/TIMER0_DIV;
+	/* Convert timer value to nsec */
+	return (TIMER0_DIV - count) * (NSEC_PER_SEC/HZ)/TIMER0_DIV;
 }
 
 /* Excerpt from the Etrax100 HSDD about the built-in watchdog:
@@ -191,6 +191,8 @@
 void __init
 time_init(void)
 {	
+	arch_gettimeoffset = cris_v10_gettimeoffset;
+
 	/* probe for the RTC and read it if it exists 
 	 * Before the RTC can be probed the loops_per_usec variable needs 
 	 * to be initialized to make usleep work. A better value for 
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index 277ffc4..fe6acda 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -39,17 +39,6 @@
 extern unsigned long loops_per_jiffy; /* init/main.c */
 unsigned long loops_per_usec;
 
-
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern unsigned long do_slow_gettimeoffset(void);
-static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
-
-u32 arch_gettimeoffset(void)
-{
-       return do_gettimeoffset() * 1000;
-}
-#endif
-
 int set_rtc_mmss(unsigned long nowtime)
 {
 	D(printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime));
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 84dd040..1a15f81 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -57,7 +57,7 @@
 
 static unsigned long latch;
 
-u32 arch_gettimeoffset(void)
+static u32 m32r_gettimeoffset(void)
 {
 	unsigned long  elapsed_time = 0;  /* [us] */
 
@@ -165,6 +165,8 @@
 
 void __init time_init(void)
 {
+	arch_gettimeoffset = m32r_gettimeoffset;
+
 #if defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_XNUX2) \
 	|| defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_M32700) \
 	|| defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index ee01b7a..b819390 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -95,7 +95,7 @@
 static void amiga_get_model(char *model);
 static void amiga_get_hardware_list(struct seq_file *m);
 /* amiga specific timer functions */
-static unsigned long amiga_gettimeoffset(void);
+static u32 amiga_gettimeoffset(void);
 extern void amiga_mksound(unsigned int count, unsigned int ticks);
 static void amiga_reset(void);
 extern void amiga_init_sound(void);
@@ -377,7 +377,7 @@
 	mach_init_IRQ        = amiga_init_IRQ;
 	mach_get_model       = amiga_get_model;
 	mach_get_hardware_list = amiga_get_hardware_list;
-	mach_gettimeoffset   = amiga_gettimeoffset;
+	arch_gettimeoffset   = amiga_gettimeoffset;
 
 	/*
 	 * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
@@ -482,10 +482,10 @@
 #define TICK_SIZE 10000
 
 /* This is always executed with interrupts disabled.  */
-static unsigned long amiga_gettimeoffset(void)
+static u32 amiga_gettimeoffset(void)
 {
 	unsigned short hi, lo, hi2;
-	unsigned long ticks, offset = 0;
+	u32 ticks, offset = 0;
 
 	/* read CIA B timer A current value */
 	hi  = ciab.tahi;
@@ -507,7 +507,7 @@
 	ticks = jiffy_ticks - ticks;
 	ticks = (10000 * ticks) / jiffy_ticks;
 
-	return ticks + offset;
+	return (ticks + offset) * 1000;
 }
 
 static void amiga_reset(void)  __noreturn;
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index f5565d6..3ea56b9 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -26,7 +26,7 @@
 
 extern void dn_sched_init(irq_handler_t handler);
 extern void dn_init_IRQ(void);
-extern unsigned long dn_gettimeoffset(void);
+extern u32 dn_gettimeoffset(void);
 extern int dn_dummy_hwclk(int, struct rtc_time *);
 extern int dn_dummy_set_clock_mmss(unsigned long);
 extern void dn_dummy_reset(void);
@@ -151,7 +151,7 @@
 
 	mach_sched_init=dn_sched_init; /* */
 	mach_init_IRQ=dn_init_IRQ;
-	mach_gettimeoffset   = dn_gettimeoffset;
+	arch_gettimeoffset   = dn_gettimeoffset;
 	mach_max_dma_address = 0xffffffff;
 	mach_hwclk           = dn_dummy_hwclk; /* */
 	mach_set_clock_mmss  = dn_dummy_set_clock_mmss; /* */
@@ -203,10 +203,9 @@
 		pr_err("Couldn't register timer interrupt\n");
 }
 
-unsigned long dn_gettimeoffset(void) {
-
+u32 dn_gettimeoffset(void)
+{
 	return 0xdeadbeef;
-
 }
 
 int dn_dummy_hwclk(int op, struct rtc_time *t) {
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index d8eb327..037c11c 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -74,7 +74,7 @@
 
 /* atari specific timer functions (in time.c) */
 extern void atari_sched_init(irq_handler_t);
-extern unsigned long atari_gettimeoffset (void);
+extern u32 atari_gettimeoffset(void);
 extern int atari_mste_hwclk (int, struct rtc_time *);
 extern int atari_tt_hwclk (int, struct rtc_time *);
 extern int atari_mste_set_clock_mmss (unsigned long);
@@ -204,7 +204,7 @@
 	mach_init_IRQ        = atari_init_IRQ;
 	mach_get_model	 = atari_get_model;
 	mach_get_hardware_list = atari_get_hardware_list;
-	mach_gettimeoffset   = atari_gettimeoffset;
+	arch_gettimeoffset   = atari_gettimeoffset;
 	mach_reset           = atari_reset;
 	mach_max_dma_address = 0xffffff;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index c0cc68a..da8f981 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -42,9 +42,9 @@
 #define TICK_SIZE 10000
 
 /* This is always executed with interrupts disabled.  */
-unsigned long atari_gettimeoffset (void)
+u32 atari_gettimeoffset(void)
 {
-  unsigned long ticks, offset = 0;
+  u32 ticks, offset = 0;
 
   /* read MFP timer C current value */
   ticks = st_mfp.tim_dt_c;
@@ -57,7 +57,7 @@
   ticks = INT_TICKS - ticks;
   ticks = ticks * 10000L / INT_TICKS;
 
-  return ticks + offset;
+  return (ticks + offset) * 1000;
 }
 
 
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 0bf850a..8943aa4 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -38,7 +38,7 @@
 
 static void bvme6000_get_model(char *model);
 extern void bvme6000_sched_init(irq_handler_t handler);
-extern unsigned long bvme6000_gettimeoffset (void);
+extern u32 bvme6000_gettimeoffset(void);
 extern int bvme6000_hwclk (int, struct rtc_time *);
 extern int bvme6000_set_clock_mmss (unsigned long);
 extern void bvme6000_reset (void);
@@ -110,7 +110,7 @@
     mach_max_dma_address = 0xffffffff;
     mach_sched_init      = bvme6000_sched_init;
     mach_init_IRQ        = bvme6000_init_IRQ;
-    mach_gettimeoffset   = bvme6000_gettimeoffset;
+    arch_gettimeoffset   = bvme6000_gettimeoffset;
     mach_hwclk           = bvme6000_hwclk;
     mach_set_clock_mmss	 = bvme6000_set_clock_mmss;
     mach_reset		 = bvme6000_reset;
@@ -216,13 +216,13 @@
  * results...
  */
 
-unsigned long bvme6000_gettimeoffset (void)
+u32 bvme6000_gettimeoffset(void)
 {
     volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
     volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
     unsigned char msr = rtc->msr & 0xc0;
     unsigned char t1int, t1op;
-    unsigned long v = 800000, ov;
+    u32 v = 800000, ov;
 
     rtc->msr = 0;	/* Ensure timer registers accessible */
 
@@ -246,7 +246,7 @@
 	v += 10000;			/* Int pending, + 10ms */
     rtc->msr = msr;
 
-    return v;
+    return v * 1000;
 }
 
 /*
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index bf16af1..b7609f7 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -251,7 +251,7 @@
 	mach_sched_init      = hp300_sched_init;
 	mach_init_IRQ        = hp300_init_IRQ;
 	mach_get_model       = hp300_get_model;
-	mach_gettimeoffset   = hp300_gettimeoffset;
+	arch_gettimeoffset   = hp300_gettimeoffset;
 	mach_hwclk	     = hp300_hwclk;
 	mach_get_ss	     = hp300_get_ss;
 	mach_reset           = hp300_reset;
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index 29a71be..749543b 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -46,7 +46,7 @@
 	return vector(irq, NULL);
 }
 
-unsigned long hp300_gettimeoffset(void)
+u32 hp300_gettimeoffset(void)
 {
   /* Read current timer 1 value */
   unsigned char lsb, msb1, msb2;
@@ -59,7 +59,7 @@
     /* A carry happened while we were reading.  Read it again */
     lsb = in_8(CLOCKBASE + 7);
   ticks = INTVAL - ((msb2 << 8) | lsb);
-  return (USECS_PER_JIFFY * ticks) / INTVAL;
+  return ((USECS_PER_JIFFY * ticks) / INTVAL) * 1000;
 }
 
 void __init hp300_sched_init(irq_handler_t vector)
diff --git a/arch/m68k/hp300/time.h b/arch/m68k/hp300/time.h
index 7b98242..f5583ec 100644
--- a/arch/m68k/hp300/time.h
+++ b/arch/m68k/hp300/time.h
@@ -1,2 +1,2 @@
 extern void hp300_sched_init(irq_handler_t vector);
-extern unsigned long hp300_gettimeoffset(void);
+extern u32 hp300_gettimeoffset(void);
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 825c1c8..953ca21 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -3,6 +3,7 @@
 
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
+#include <linux/time.h>
 
 struct pt_regs;
 struct mktime;
@@ -16,7 +17,6 @@
 extern void (*mach_get_model) (char *model);
 extern void (*mach_get_hardware_list) (struct seq_file *m);
 /* machine dependent timer functions */
-extern unsigned long (*mach_gettimeoffset)(void);
 extern int (*mach_hwclk)(int, struct rtc_time*);
 extern unsigned int (*mach_get_ss)(void);
 extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index d872ce4..80cfbe5 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -84,7 +84,6 @@
 void (*mach_get_model) (char *model);
 void (*mach_get_hardware_list) (struct seq_file *m);
 /* machine dependent timer functions */
-unsigned long (*mach_gettimeoffset) (void);
 int (*mach_hwclk) (int, struct rtc_time*);
 EXPORT_SYMBOL(mach_hwclk);
 int (*mach_set_clock_mmss) (unsigned long);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 5d0bcaa..bea6bcf 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -80,18 +80,8 @@
 	}
 }
 
-void __init time_init(void)
-{
-	mach_sched_init(timer_interrupt);
-}
-
 #ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 
-u32 arch_gettimeoffset(void)
-{
-	return mach_gettimeoffset() * 1000;
-}
-
 static int __init rtc_init(void)
 {
 	struct platform_device *pdev;
@@ -106,3 +96,8 @@
 module_init(rtc_init);
 
 #endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
+
+void __init time_init(void)
+{
+	mach_sched_init(timer_interrupt);
+}
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index d9f62e0..afb95d5 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -52,7 +52,7 @@
 static unsigned long mac_orig_videoaddr;
 
 /* Mac specific timer functions */
-extern unsigned long mac_gettimeoffset(void);
+extern u32 mac_gettimeoffset(void);
 extern int mac_hwclk(int, struct rtc_time *);
 extern int mac_set_clock_mmss(unsigned long);
 extern void iop_preinit(void);
@@ -177,7 +177,7 @@
 	mach_sched_init = mac_sched_init;
 	mach_init_IRQ = mac_init_IRQ;
 	mach_get_model = mac_get_model;
-	mach_gettimeoffset = mac_gettimeoffset;
+	arch_gettimeoffset = mac_gettimeoffset;
 	mach_hwclk = mac_hwclk;
 	mach_set_clock_mmss = mac_set_clock_mmss;
 	mach_reset = mac_reset;
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index 2d85662..5d1458b 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -327,7 +327,7 @@
  * TBI: get time offset between scheduling timer ticks
  */
 
-unsigned long mac_gettimeoffset (void)
+u32 mac_gettimeoffset(void)
 {
 	unsigned long ticks, offset = 0;
 
@@ -341,7 +341,7 @@
 	ticks = MAC_CLOCK_TICK - ticks;
 	ticks = ticks * 10000L / MAC_CLOCK_TICK;
 
-	return ticks + offset;
+	return (ticks + offset) * 1000;
 }
 
 /*
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index a41c091..1c62628 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -37,7 +37,7 @@
 
 static void mvme147_get_model(char *model);
 extern void mvme147_sched_init(irq_handler_t handler);
-extern unsigned long mvme147_gettimeoffset (void);
+extern u32 mvme147_gettimeoffset(void);
 extern int mvme147_hwclk (int, struct rtc_time *);
 extern int mvme147_set_clock_mmss (unsigned long);
 extern void mvme147_reset (void);
@@ -88,7 +88,7 @@
 	mach_max_dma_address	= 0x01000000;
 	mach_sched_init		= mvme147_sched_init;
 	mach_init_IRQ		= mvme147_init_IRQ;
-	mach_gettimeoffset	= mvme147_gettimeoffset;
+	arch_gettimeoffset	= mvme147_gettimeoffset;
 	mach_hwclk		= mvme147_hwclk;
 	mach_set_clock_mmss	= mvme147_set_clock_mmss;
 	mach_reset		= mvme147_reset;
@@ -127,7 +127,7 @@
 
 /* This is always executed with interrupts disabled.  */
 /* XXX There are race hazards in this code XXX */
-unsigned long mvme147_gettimeoffset (void)
+u32 mvme147_gettimeoffset(void)
 {
 	volatile unsigned short *cp = (volatile unsigned short *)0xfffe1012;
 	unsigned short n;
@@ -137,7 +137,7 @@
 		n = *cp;
 
 	n -= PCC_TIMER_PRELOAD;
-	return (unsigned long)n * 25 / 4;
+	return ((unsigned long)n * 25 / 4) * 1000;
 }
 
 static int bcd2int (unsigned char b)
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index b6d7d8a..080a342 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -43,7 +43,7 @@
 
 static void mvme16x_get_model(char *model);
 extern void mvme16x_sched_init(irq_handler_t handler);
-extern unsigned long mvme16x_gettimeoffset (void);
+extern u32 mvme16x_gettimeoffset(void);
 extern int mvme16x_hwclk (int, struct rtc_time *);
 extern int mvme16x_set_clock_mmss (unsigned long);
 extern void mvme16x_reset (void);
@@ -289,7 +289,7 @@
     mach_max_dma_address = 0xffffffff;
     mach_sched_init      = mvme16x_sched_init;
     mach_init_IRQ        = mvme16x_init_IRQ;
-    mach_gettimeoffset   = mvme16x_gettimeoffset;
+    arch_gettimeoffset   = mvme16x_gettimeoffset;
     mach_hwclk           = mvme16x_hwclk;
     mach_set_clock_mmss	 = mvme16x_set_clock_mmss;
     mach_reset		 = mvme16x_reset;
@@ -405,9 +405,9 @@
 
 
 /* This is always executed with interrupts disabled.  */
-unsigned long mvme16x_gettimeoffset (void)
+u32 mvme16x_gettimeoffset(void)
 {
-    return (*(volatile unsigned long *)0xfff42008);
+    return (*(volatile u32 *)0xfff42008) * 1000;
 }
 
 int bcd2int (unsigned char b)
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 1adb5b7..658542b 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -40,7 +40,7 @@
 static void q40_get_model(char *model);
 extern void q40_sched_init(irq_handler_t handler);
 
-static unsigned long q40_gettimeoffset(void);
+static u32 q40_gettimeoffset(void);
 static int q40_hwclk(int, struct rtc_time *);
 static unsigned int q40_get_ss(void);
 static int q40_set_clock_mmss(unsigned long);
@@ -170,7 +170,7 @@
 	mach_sched_init = q40_sched_init;
 
 	mach_init_IRQ = q40_init_IRQ;
-	mach_gettimeoffset = q40_gettimeoffset;
+	arch_gettimeoffset = q40_gettimeoffset;
 	mach_hwclk = q40_hwclk;
 	mach_get_ss = q40_get_ss;
 	mach_get_rtc_pll = q40_get_rtc_pll;
@@ -204,9 +204,9 @@
 }
 
 
-static unsigned long q40_gettimeoffset(void)
+static u32 q40_gettimeoffset(void)
 {
-	return 5000 * (ql_ticks != 0);
+	return 5000 * (ql_ticks != 0) * 1000;
 }
 
 
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 2ca25bd..f59ec58 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@
 
 char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
 
-extern unsigned long sun3_gettimeoffset(void);
+extern u32 sun3_gettimeoffset(void);
 static void sun3_sched_init(irq_handler_t handler);
 extern void sun3_get_model (char* model);
 extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -141,7 +141,7 @@
         mach_sched_init      =  sun3_sched_init;
         mach_init_IRQ        =  sun3_init_IRQ;
         mach_reset           =  sun3_reboot;
-	mach_gettimeoffset   =  sun3_gettimeoffset;
+	arch_gettimeoffset   =  sun3_gettimeoffset;
 	mach_get_model	     =  sun3_get_model;
 	mach_hwclk           =  sun3_hwclk;
 	mach_halt	     =  sun3_halt;
diff --git a/arch/m68k/sun3/intersil.c b/arch/m68k/sun3/intersil.c
index 94fe801..889829e 100644
--- a/arch/m68k/sun3/intersil.c
+++ b/arch/m68k/sun3/intersil.c
@@ -23,9 +23,9 @@
 #define START_VAL (INTERSIL_RUN | INTERSIL_INT_ENABLE | INTERSIL_24H_MODE)
 
 /* does this need to be implemented? */
-unsigned long sun3_gettimeoffset(void)
+u32 sun3_gettimeoffset(void)
 {
-  return 1;
+  return 1000;
 }
 
 
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index dd306c8..0532d64 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -48,7 +48,7 @@
 	mach_sched_init      = sun3x_sched_init;
 	mach_init_IRQ        = sun3_init_IRQ;
 
-	mach_gettimeoffset   = sun3x_gettimeoffset;
+	arch_gettimeoffset   = sun3x_gettimeoffset;
 	mach_reset           = sun3x_reboot;
 
 	mach_hwclk           = sun3x_hwclk;
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index 1d0a724..c8eb08a 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -71,7 +71,7 @@
 	return 0;
 }
 /* Not much we can do here */
-unsigned long sun3x_gettimeoffset (void)
+u32 sun3x_gettimeoffset(void)
 {
     return 0L;
 }
diff --git a/arch/m68k/sun3x/time.h b/arch/m68k/sun3x/time.h
index 6909e12..a4f9126 100644
--- a/arch/m68k/sun3x/time.h
+++ b/arch/m68k/sun3x/time.h
@@ -2,7 +2,7 @@
 #define SUN3X_TIME_H
 
 extern int sun3x_hwclk(int set, struct rtc_time *t);
-unsigned long sun3x_gettimeoffset (void);
+u32 sun3x_gettimeoffset(void);
 void sun3x_sched_init(irq_handler_t vector);
 
 struct mostek_dt {
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 7fdcbd3..7d978c1 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -1,3 +1,6 @@
+config CLKSRC_OF
+	bool
+
 config CLKSRC_I8253
 	bool
 
@@ -25,6 +28,9 @@
 config SUNXI_TIMER
 	bool
 
+config VT8500_TIMER
+	bool
+
 config CLKSRC_NOMADIK_MTU
 	bool
 	depends on (ARCH_NOMADIK || ARCH_U8500)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index f93453d..596c45c 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
 obj-$(CONFIG_X86_CYCLONE_TIMER)	+= cyclone.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
@@ -16,5 +17,7 @@
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
 obj-$(CONFIG_SUNXI_TIMER)	+= sunxi_timer.o
+obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
+obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
 
 obj-$(CONFIG_CLKSRC_ARM_GENERIC)	+= arm_generic.o
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index bc19f12..50c68fe 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/bcm2835_timer.h>
 #include <linux/bitops.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
@@ -101,7 +100,7 @@
 	{}
 };
 
-static void __init bcm2835_time_init(void)
+static void __init bcm2835_timer_init(void)
 {
 	struct device_node *node;
 	void __iomem *base;
@@ -155,7 +154,5 @@
 
 	pr_info("bcm2835: system timer (irq = %d)\n", irq);
 }
-
-struct sys_timer bcm2835_timer = {
-	.init = bcm2835_time_init,
-};
+CLOCKSOURCE_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
+			bcm2835_timer_init);
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
new file mode 100644
index 0000000..bdabdaa
--- /dev/null
+++ b/drivers/clocksource/clksrc-of.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+
+extern struct of_device_id __clksrc_of_table[];
+
+static const struct of_device_id __clksrc_of_table_sentinel
+	__used __section(__clksrc_of_table_end);
+
+void __init clocksource_of_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	void (*init_func)(void);
+
+	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
+		init_func = match->data;
+		init_func();
+	}
+}
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index d927938..ea21048 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -100,7 +100,6 @@
 	.set_mode = mfgpt_set_mode,
 	.set_next_event = mfgpt_next_event,
 	.rating = 250,
-	.shift = 32
 };
 
 static irqreturn_t mfgpt_tick(int irq, void *dev_id)
@@ -169,17 +168,11 @@
 	cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP, val);
 
 	/* Set up the clock event */
-	cs5535_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
-			cs5535_clockevent.shift);
-	cs5535_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
-			&cs5535_clockevent);
-	cs5535_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
-			&cs5535_clockevent);
-
 	printk(KERN_INFO DRV_NAME
 		": Registering MFGPT timer as a clock event, using IRQ %d\n",
 		timer_irq);
-	clockevents_register_device(&cs5535_clockevent);
+	clockevents_config_and_register(&cs5535_clockevent, MFGPT_HZ,
+					0xF, 0xFFFE);
 
 	return 0;
 
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index f7dba5b..ab09ed3 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -107,7 +107,7 @@
 	{},
 };
 
-static void __init timer_init(void)
+void __init dw_apb_timer_init(void)
 {
 	struct device_node *event_timer, *source_timer;
 
@@ -125,7 +125,3 @@
 
 	init_sched_clock();
 }
-
-struct sys_timer dw_apb_timer = {
-	.init = timer_init,
-};
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index 8914c3c..025afc6 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -134,12 +134,32 @@
 	}
 }
 
+void nmdk_clksrc_reset(void)
+{
+	/* Disable */
+	writel(0, mtu_base + MTU_CR(0));
+
+	/* ClockSource: configure load and background-load, and fire it up */
+	writel(nmdk_cycle, mtu_base + MTU_LR(0));
+	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+
+	writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
+	       mtu_base + MTU_CR(0));
+}
+
+static void nmdk_clkevt_resume(struct clock_event_device *cedev)
+{
+	nmdk_clkevt_reset();
+	nmdk_clksrc_reset();
+}
+
 static struct clock_event_device nmdk_clkevt = {
 	.name		= "mtu_1",
 	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
 	.rating		= 200,
 	.set_mode	= nmdk_clkevt_mode,
 	.set_next_event	= nmdk_clkevt_next,
+	.resume		= nmdk_clkevt_resume,
 };
 
 /*
@@ -161,19 +181,6 @@
 	.dev_id		= &nmdk_clkevt,
 };
 
-void nmdk_clksrc_reset(void)
-{
-	/* Disable */
-	writel(0, mtu_base + MTU_CR(0));
-
-	/* ClockSource: configure load and background-load, and fire it up */
-	writel(nmdk_cycle, mtu_base + MTU_LR(0));
-	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-
-	writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
-	       mtu_base + MTU_CR(0));
-}
-
 void __init nmdk_timer_init(void __iomem *base, int irq)
 {
 	unsigned long rate;
diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c
index 93d09d0..4086b91 100644
--- a/drivers/clocksource/sunxi_timer.c
+++ b/drivers/clocksource/sunxi_timer.c
@@ -74,7 +74,6 @@
 
 static struct clock_event_device sunxi_clockevent = {
 	.name = "sunxi_tick",
-	.shift = 32,
 	.rating = 300,
 	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode = sunxi_clkevt_mode,
@@ -104,7 +103,7 @@
 	{ }
 };
 
-static void __init sunxi_timer_init(void)
+void __init sunxi_timer_init(void)
 {
 	struct device_node *node;
 	unsigned long rate = 0;
@@ -154,18 +153,8 @@
 	val = readl(timer_base + TIMER_CTL_REG);
 	writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG);
 
-	sunxi_clockevent.mult = div_sc(rate / TIMER_SCAL,
-				NSEC_PER_SEC,
-				sunxi_clockevent.shift);
-	sunxi_clockevent.max_delta_ns = clockevent_delta2ns(0xff,
-							    &sunxi_clockevent);
-	sunxi_clockevent.min_delta_ns = clockevent_delta2ns(0x1,
-							    &sunxi_clockevent);
 	sunxi_clockevent.cpumask = cpumask_of(0);
 
-	clockevents_register_device(&sunxi_clockevent);
+	clockevents_config_and_register(&sunxi_clockevent, rate / TIMER_SCAL,
+					0x1, 0xff);
 }
-
-struct sys_timer sunxi_timer = {
-	.init = sunxi_timer_init,
-};
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 32cb929..8a61872 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -157,7 +157,6 @@
 		.name		= "tc_clkevt",
 		.features	= CLOCK_EVT_FEAT_PERIODIC
 					| CLOCK_EVT_FEAT_ONESHOT,
-		.shift		= 32,
 		/* Should be lower than at91rm9200's system timer */
 		.rating		= 125,
 		.set_next_event	= tc_next_event,
@@ -196,13 +195,9 @@
 
 	timer_clock = clk32k_divisor_idx;
 
-	clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
-	clkevt.clkevt.max_delta_ns
-		= clockevent_delta2ns(0xffff, &clkevt.clkevt);
-	clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
 	clkevt.clkevt.cpumask = cpumask_of(0);
 
-	clockevents_register_device(&clkevt.clkevt);
+	clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff);
 
 	setup_irq(irq, &tc_irqaction);
 }
diff --git a/arch/arm/mach-tegra/timer.c b/drivers/clocksource/tegra20_timer.c
similarity index 92%
rename from arch/arm/mach-tegra/timer.c
rename to drivers/clocksource/tegra20_timer.c
index e4863f3..0bde03f 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -1,6 +1,4 @@
 /*
- * arch/arch/mach-tegra/timer.c
- *
  * Copyright (C) 2010 Google, Inc.
  *
  * Author:
@@ -33,8 +31,6 @@
 #include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
 
-#include "board.h"
-
 #define RTC_SECONDS            0x08
 #define RTC_SHADOW_SECONDS     0x0c
 #define RTC_MILLISECONDS       0x10
@@ -168,7 +164,7 @@
 	{}
 };
 
-static void __init tegra_init_timer(void)
+static void __init tegra20_init_timer(void)
 {
 	struct device_node *np;
 	struct clk *clk;
@@ -183,7 +179,7 @@
 
 	timer_reg_base = of_iomap(np, 0);
 	if (!timer_reg_base) {
-		pr_err("Can't map timer registers");
+		pr_err("Can't map timer registers\n");
 		BUG();
 	}
 
@@ -259,23 +255,16 @@
 		BUG();
 	}
 
-	clockevents_calc_mult_shift(&tegra_clockevent, 1000000, 5);
-	tegra_clockevent.max_delta_ns =
-		clockevent_delta2ns(0x1fffffff, &tegra_clockevent);
-	tegra_clockevent.min_delta_ns =
-		clockevent_delta2ns(0x1, &tegra_clockevent);
 	tegra_clockevent.cpumask = cpu_all_mask;
 	tegra_clockevent.irq = tegra_timer_irq.irq;
-	clockevents_register_device(&tegra_clockevent);
+	clockevents_config_and_register(&tegra_clockevent, 1000000,
+					0x1, 0x1fffffff);
 #ifdef CONFIG_HAVE_ARM_TWD
 	twd_local_timer_of_register();
 #endif
 	register_persistent_clock(NULL, tegra_read_persistent_clock);
 }
-
-struct sys_timer tegra_sys_timer = {
-	.init = tegra_init_timer,
-};
+CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
 
 #ifdef CONFIG_PM
 static u32 usec_config;
diff --git a/arch/arm/mach-vt8500/timer.c b/drivers/clocksource/vt8500_timer.c
similarity index 93%
rename from arch/arm/mach-vt8500/timer.c
rename to drivers/clocksource/vt8500_timer.c
index 3dd21a4..8efc86b 100644
--- a/arch/arm/mach-vt8500/timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -134,7 +134,7 @@
 	{ }
 };
 
-void __init vt8500_timer_init(void)
+static void __init vt8500_timer_init(void)
 {
 	struct device_node *np;
 	int timer_irq;
@@ -168,17 +168,13 @@
 		pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
 					__func__, clocksource.name);
 
-	clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
-
-	/* copy-pasted from mach-msm; no idea */
-	clockevent.max_delta_ns =
-		clockevent_delta2ns(0xf0000000, &clockevent);
-	clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
 	clockevent.cpumask = cpumask_of(0);
 
 	if (setup_irq(timer_irq, &irq))
 		pr_err("%s: setup_irq failed for %s\n", __func__,
 							clockevent.name);
-	clockevents_register_device(&clockevent);
+	clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ,
+					4, 0xf0000000);
 }
 
+CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init)
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index 79a8486..48a1988 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <mach/id.h>
 
 static struct cpufreq_frequency_table *freq_table;
 static struct clk *armss_clk;
@@ -165,9 +164,6 @@
 
 static int __init db8500_cpufreq_register(void)
 {
-	if (!cpu_is_u8500_family())
-		return -ENODEV;
-
 	pr_info("cpufreq for DB8500 started\n");
 	return platform_driver_register(&db8500_cpufreq_plat_driver);
 }
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 69b676d..78057a3 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -18,10 +18,10 @@
 #include <linux/cpufreq.h>
 #include <linux/suspend.h>
 
-#include <mach/cpufreq.h>
-
 #include <plat/cpu.h>
 
+#include "exynos-cpufreq.h"
+
 static struct exynos_dvfs_info *exynos_info;
 
 static struct regulator *arm_regulator;
diff --git a/arch/arm/mach-exynos/include/mach/cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
similarity index 95%
rename from arch/arm/mach-exynos/include/mach/cpufreq.h
rename to drivers/cpufreq/exynos-cpufreq.h
index b5d39dd..92b852e 100644
--- a/arch/arm/mach-exynos/include/mach/cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos/include/mach/cpufreq.h
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index de91755..add7fbe 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -18,7 +18,8 @@
 #include <linux/cpufreq.h>
 
 #include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
 
 static struct clk *cpu_clk;
 static struct clk *moutcore;
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 0661039..08b7477 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -18,7 +18,8 @@
 #include <linux/cpufreq.h>
 
 #include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
 
 static struct clk *cpu_clk;
 static struct clk *moutcore;
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index b934486..9fae466 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -19,7 +19,8 @@
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
 
 static struct clk *cpu_clk;
 static struct clk *moutcore;
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index b2016ed..b3643ff 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -38,7 +38,6 @@
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
-#include <plat/gpio-fns.h>
 #include <plat/pm.h>
 
 int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 62ca575..a350969 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -1,3 +1,30 @@
+config IRQCHIP
+	def_bool y
+	depends on OF_IRQ
+
+config ARM_GIC
+	bool
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+
+config GIC_NON_BANKED
+	bool
+
+config ARM_VIC
+	bool
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+
+config ARM_VIC_NR
+	int
+	default 4 if ARCH_S5PV210
+	default 3 if ARCH_S5PC100
+	default 2
+	depends on ARM_VIC
+	help
+	  The maximum number of VICs available in the system, for
+	  power management.
+
 config VERSATILE_FPGA_IRQ
 	bool
 	select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bf4609a..e65fbf2 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -1,4 +1,9 @@
+obj-$(CONFIG_IRQCHIP)			+= irqchip.o
+
 obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
+obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi.o
-obj-$(CONFIG_VERSATILE_FPGA_IRQ)	+= irq-versatile-fpga.o
 obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
+obj-$(CONFIG_ARM_GIC)			+= irq-gic.o
+obj-$(CONFIG_ARM_VIC)			+= irq-vic.o
+obj-$(CONFIG_VERSATILE_FPGA_IRQ)	+= irq-versatile-fpga.o
diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c
new file mode 100644
index 0000000..04d86a9
--- /dev/null
+++ b/drivers/irqchip/exynos-combiner.c
@@ -0,0 +1,230 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Combiner irqchip for EXYNOS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/mach/irq.h>
+
+#include <plat/cpu.h>
+
+#include "irqchip.h"
+
+#define COMBINER_ENABLE_SET	0x0
+#define COMBINER_ENABLE_CLEAR	0x4
+#define COMBINER_INT_STATUS	0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+	unsigned int irq_offset;
+	unsigned int irq_mask;
+	void __iomem *base;
+};
+
+static struct irq_domain *combiner_irq_domain;
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+	struct combiner_chip_data *combiner_data =
+		irq_data_get_irq_chip_data(data);
+
+	return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->hwirq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->hwirq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+	unsigned int cascade_irq, combiner_irq;
+	unsigned long status;
+
+	chained_irq_enter(chip, desc);
+
+	spin_lock(&irq_controller_lock);
+	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+	spin_unlock(&irq_controller_lock);
+	status &= chip_data->irq_mask;
+
+	if (status == 0)
+		goto out;
+
+	combiner_irq = __ffs(status);
+
+	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+	if (unlikely(cascade_irq >= NR_IRQS))
+		do_bad_IRQ(cascade_irq, desc);
+	else
+		generic_handle_irq(cascade_irq);
+
+ out:
+	chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+	.name		= "COMBINER",
+	.irq_mask	= combiner_mask_irq,
+	.irq_unmask	= combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+	unsigned int max_nr;
+
+	if (soc_is_exynos5250())
+		max_nr = EXYNOS5_MAX_COMBINER_NR;
+	else
+		max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+	if (combiner_nr >= max_nr)
+		BUG();
+	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+		BUG();
+	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init_one(unsigned int combiner_nr,
+				     void __iomem *base)
+{
+	combiner_data[combiner_nr].base = base;
+	combiner_data[combiner_nr].irq_offset = irq_find_mapping(
+		combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
+	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+	/* Disable all interrupts */
+	__raw_writel(combiner_data[combiner_nr].irq_mask,
+		     base + COMBINER_ENABLE_CLEAR);
+}
+
+#ifdef CONFIG_OF
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	if (d->of_node != controller)
+		return -EINVAL;
+
+	if (intsize < 2)
+		return -EINVAL;
+
+	*out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
+	*out_type = 0;
+
+	return 0;
+}
+#else
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	return -EINVAL;
+}
+#endif
+
+static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
+	irq_set_chip_data(irq, &combiner_data[hw >> 3]);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+	return 0;
+}
+
+static struct irq_domain_ops combiner_irq_domain_ops = {
+	.xlate	= combiner_irq_domain_xlate,
+	.map	= combiner_irq_domain_map,
+};
+
+void __init combiner_init(void __iomem *combiner_base,
+			  struct device_node *np)
+{
+	int i, irq, irq_base;
+	unsigned int max_nr, nr_irq;
+
+	if (np) {
+		if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
+			pr_warning("%s: number of combiners not specified, "
+				"setting default as %d.\n",
+				__func__, EXYNOS4_MAX_COMBINER_NR);
+			max_nr = EXYNOS4_MAX_COMBINER_NR;
+		}
+	} else {
+		max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
+						EXYNOS4_MAX_COMBINER_NR;
+	}
+	nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
+
+	irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
+	if (IS_ERR_VALUE(irq_base)) {
+		irq_base = COMBINER_IRQ(0, 0);
+		pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
+	}
+
+	combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
+				&combiner_irq_domain_ops, &combiner_data);
+	if (WARN_ON(!combiner_irq_domain)) {
+		pr_warning("%s: irq domain init failed\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < max_nr; i++) {
+		combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
+		irq = IRQ_SPI(i);
+#ifdef CONFIG_OF
+		if (np)
+			irq = irq_of_parse_and_map(np, i);
+#endif
+		combiner_cascade_irq(i, irq);
+	}
+}
+
+#ifdef CONFIG_OF
+static int __init combiner_of_init(struct device_node *np,
+				   struct device_node *parent)
+{
+	void __iomem *combiner_base;
+
+	combiner_base = of_iomap(np, 0);
+	if (!combiner_base) {
+		pr_err("%s: failed to map combiner registers\n", __func__);
+		return -ENXIO;
+	}
+
+	combiner_init(combiner_base, np);
+
+	return 0;
+}
+IRQCHIP_DECLARE(exynos4210_combiner, "samsung,exynos4210-combiner",
+		combiner_of_init);
+#endif
diff --git a/arch/arm/common/gic.c b/drivers/irqchip/irq-gic.c
similarity index 96%
rename from arch/arm/common/gic.c
rename to drivers/irqchip/irq-gic.c
index 87dfa90..644d724 100644
--- a/arch/arm/common/gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -38,12 +38,14 @@
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
 #include <linux/slab.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/irq.h>
 #include <asm/exception.h>
 #include <asm/smp_plat.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware/gic.h>
+
+#include "irqchip.h"
 
 union gic_base {
 	void __iomem *common_base;
@@ -276,7 +278,7 @@
 #define gic_set_wake	NULL
 #endif
 
-asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
 {
 	u32 irqstat, irqnr;
 	struct gic_chip_data *gic = &gic_data[0];
@@ -638,6 +640,27 @@
 }
 #endif
 
+#ifdef CONFIG_SMP
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
+{
+	int cpu;
+	unsigned long map = 0;
+
+	/* Convert our logical CPU mask into a physical one. */
+	for_each_cpu(cpu, mask)
+		map |= 1 << cpu_logical_map(cpu);
+
+	/*
+	 * Ensure that stores to Normal memory are visible to the
+	 * other CPUs before issuing the IPI.
+	 */
+	dsb();
+
+	/* this always happens on GIC0 */
+	writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
+}
+#endif
+
 static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
 				irq_hw_number_t hw)
 {
@@ -764,6 +787,12 @@
 	if (WARN_ON(!gic->domain))
 		return;
 
+#ifdef CONFIG_SMP
+	set_smp_cross_call(gic_raise_softirq);
+#endif
+
+	set_handle_irq(gic_handle_irq);
+
 	gic_chip.flags |= gic_arch_extn.flags;
 	gic_dist_init(gic);
 	gic_cpu_init(gic);
@@ -777,27 +806,6 @@
 	gic_cpu_init(&gic_data[gic_nr]);
 }
 
-#ifdef CONFIG_SMP
-void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
-{
-	int cpu;
-	unsigned long map = 0;
-
-	/* Convert our logical CPU mask into a physical one. */
-	for_each_cpu(cpu, mask)
-		map |= gic_cpu_map[cpu];
-
-	/*
-	 * Ensure that stores to Normal memory are visible to the
-	 * other CPUs before issuing the IPI.
-	 */
-	dsb();
-
-	/* this always happens on GIC0 */
-	writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
-}
-#endif
-
 #ifdef CONFIG_OF
 static int gic_cnt __initdata = 0;
 
@@ -829,4 +837,9 @@
 	gic_cnt++;
 	return 0;
 }
+IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
+IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
+IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
+IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
+
 #endif
diff --git a/arch/arm/common/vic.c b/drivers/irqchip/irq-vic.c
similarity index 91%
rename from arch/arm/common/vic.c
rename to drivers/irqchip/irq-vic.c
index 8f324b9..3cf97aa 100644
--- a/arch/arm/common/vic.c
+++ b/drivers/irqchip/irq-vic.c
@@ -30,10 +30,29 @@
 #include <linux/syscore_ops.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware/vic.h>
+
+#include "irqchip.h"
+
+#define VIC_IRQ_STATUS			0x00
+#define VIC_FIQ_STATUS			0x04
+#define VIC_INT_SELECT			0x0c	/* 1 = FIQ, 0 = IRQ */
+#define VIC_INT_SOFT			0x18
+#define VIC_INT_SOFT_CLEAR		0x1c
+#define VIC_PROTECT			0x20
+#define VIC_PL190_VECT_ADDR		0x30	/* PL190 only */
+#define VIC_PL190_DEF_VECT_ADDR		0x34	/* PL190 only */
+
+#define VIC_VECT_ADDR0			0x100	/* 0 to 15 (0..31 PL192) */
+#define VIC_VECT_CNTL0			0x200	/* 0 to 15 (0..31 PL192) */
+#define VIC_ITCR			0x300	/* VIC test control register */
+
+#define VIC_VECT_CNTL_ENABLE		(1 << 5)
+
+#define VIC_PL192_VECT_ADDR		0xF00
 
 /**
  * struct vic_device - VIC PM device
@@ -66,6 +85,8 @@
 
 static int vic_id;
 
+static void vic_handle_irq(struct pt_regs *regs);
+
 /**
  * vic_init2 - common initialisation code
  * @base: Base of the VIC.
@@ -182,6 +203,40 @@
 	return 0;
 }
 
+/*
+ * Handle each interrupt in a single VIC.  Returns non-zero if we've
+ * handled at least one interrupt.  This reads the status register
+ * before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+	u32 stat, irq;
+	int handled = 0;
+
+	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
+		irq = ffs(stat) - 1;
+		handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
+		handled = 1;
+	}
+
+	return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+static asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+	int i, handled;
+
+	do {
+		for (i = 0, handled = 0; i < vic_id; ++i)
+			handled |= handle_one_vic(&vic_devices[i], regs);
+	} while (handled);
+}
+
 static struct irq_domain_ops vic_irqdomain_ops = {
 	.map = vic_irqdomain_map,
 	.xlate = irq_domain_xlate_onetwocell,
@@ -218,6 +273,7 @@
 	v->valid_sources = valid_sources;
 	v->resume_sources = resume_sources;
 	v->irq = irq;
+	set_handle_irq(vic_handle_irq);
 	vic_id++;
 	v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
 					  &vic_irqdomain_ops, v);
@@ -427,38 +483,7 @@
 
 	return 0;
 }
+IRQCHIP_DECLARE(arm_pl190_vic, "arm,pl190-vic", vic_of_init);
+IRQCHIP_DECLARE(arm_pl192_vic, "arm,pl192-vic", vic_of_init);
+IRQCHIP_DECLARE(arm_versatile_vic, "arm,versatile-vic", vic_of_init);
 #endif /* CONFIG OF */
-
-/*
- * Handle each interrupt in a single VIC.  Returns non-zero if we've
- * handled at least one interrupt.  This reads the status register
- * before handling each interrupt, which is necessary given that
- * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
- */
-static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
-{
-	u32 stat, irq;
-	int handled = 0;
-
-	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
-		irq = ffs(stat) - 1;
-		handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
-		handled = 1;
-	}
-
-	return handled;
-}
-
-/*
- * Keep iterating over all registered VIC's until there are no pending
- * interrupts.
- */
-asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
-{
-	int i, handled;
-
-	do {
-		for (i = 0, handled = 0; i < vic_id; ++i)
-			handled |= handle_one_vic(&vic_devices[i], regs);
-	} while (handled);
-}
diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c
new file mode 100644
index 0000000..f496afc
--- /dev/null
+++ b/drivers/irqchip/irqchip.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_irq.h>
+
+#include "irqchip.h"
+
+/*
+ * This special of_device_id is the sentinel at the end of the
+ * of_device_id[] array of all irqchips. It is automatically placed at
+ * the end of the array by the linker, thanks to being part of a
+ * special section.
+ */
+static const struct of_device_id
+irqchip_of_match_end __used __section(__irqchip_of_end);
+
+extern struct of_device_id __irqchip_begin[];
+
+void __init irqchip_init(void)
+{
+	of_irq_init(__irqchip_begin);
+}
diff --git a/drivers/irqchip/irqchip.h b/drivers/irqchip/irqchip.h
new file mode 100644
index 0000000..e445ba2
--- /dev/null
+++ b/drivers/irqchip/irqchip.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _IRQCHIP_H
+#define _IRQCHIP_H
+
+/*
+ * This macro must be used by the different irqchip drivers to declare
+ * the association between their DT compatible string and their
+ * initialization function.
+ *
+ * @name: name that must be unique accross all IRQCHIP_DECLARE of the
+ * same file.
+ * @compstr: compatible string of the irqchip driver
+ * @fn: initialization function
+ */
+#define IRQCHIP_DECLARE(name,compstr,fn)				\
+	static const struct of_device_id irqchip_of_match_##name	\
+	__used __section(__irqchip_of_table)				\
+	= { .compatible = compstr, .data = fn }
+
+#endif
diff --git a/drivers/irqchip/spear-shirq.c b/drivers/irqchip/spear-shirq.c
index 80e1d2f..8527743 100644
--- a/drivers/irqchip/spear-shirq.c
+++ b/drivers/irqchip/spear-shirq.c
@@ -25,6 +25,8 @@
 #include <linux/of_irq.h>
 #include <linux/spinlock.h>
 
+#include "irqchip.h"
+
 static DEFINE_SPINLOCK(lock);
 
 /* spear300 shared irq registers offsets and masks */
@@ -300,6 +302,7 @@
 	return shirq_init(spear300_shirq_blocks,
 			ARRAY_SIZE(spear300_shirq_blocks), np);
 }
+IRQCHIP_DECLARE(spear300_shirq, "st,spear300-shirq", spear300_shirq_of_init);
 
 int __init spear310_shirq_of_init(struct device_node *np,
 		struct device_node *parent)
@@ -307,6 +310,7 @@
 	return shirq_init(spear310_shirq_blocks,
 			ARRAY_SIZE(spear310_shirq_blocks), np);
 }
+IRQCHIP_DECLARE(spear310_shirq, "st,spear310-shirq", spear310_shirq_of_init);
 
 int __init spear320_shirq_of_init(struct device_node *np,
 		struct device_node *parent)
@@ -314,3 +318,4 @@
 	return shirq_init(spear320_shirq_blocks,
 			ARRAY_SIZE(spear320_shirq_blocks), np);
 }
+IRQCHIP_DECLARE(spear320_shirq, "st,spear320-shirq", spear320_shirq_of_init);
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 268f45d4..1192518 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -26,22 +26,18 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/regulator/machine.h>
 #include <linux/cpufreq.h>
-#include <asm/hardware/gic.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db8500-regs.h>
-#include <mach/id.h>
 #include "dbx500-prcmu-regs.h"
 
-/* Offset for the firmware version within the TCPM */
-#define PRCMU_FW_VERSION_OFFSET 0xA4
-
 /* Index of different voltages to be used when accessing AVSData */
 #define PRCM_AVS_BASE		0x2FC
 #define PRCM_AVS_VBB_RET	(PRCM_AVS_BASE + 0x0)
@@ -216,10 +212,8 @@
 #define PRCM_REQ_MB5_I2C_HW_BITS	(PRCM_REQ_MB5 + 0x1)
 #define PRCM_REQ_MB5_I2C_REG		(PRCM_REQ_MB5 + 0x2)
 #define PRCM_REQ_MB5_I2C_VAL		(PRCM_REQ_MB5 + 0x3)
-#define PRCMU_I2C_WRITE(slave) \
-	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define PRCMU_I2C_READ(slave) \
-	(((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6))
+#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6))
 #define PRCMU_I2C_STOP_EN		BIT(3)
 
 /* Mailbox 5 ACKs */
@@ -1049,12 +1043,13 @@
  *
  * This function sets the operating point of the DDR.
  */
+static bool enable_set_ddr_opp;
 int db8500_prcmu_set_ddr_opp(u8 opp)
 {
 	if (opp < DDR_100_OPP || opp > DDR_25_OPP)
 		return -EINVAL;
 	/* Changing the DDR OPP can hang the hardware pre-v21 */
-	if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
+	if (enable_set_ddr_opp)
 		writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
 
 	return 0;
@@ -2706,21 +2701,43 @@
 	.irq_unmask	= prcmu_irq_unmask,
 };
 
-static char *fw_project_name(u8 project)
+static __init char *fw_project_name(u32 project)
 {
 	switch (project) {
 	case PRCMU_FW_PROJECT_U8500:
 		return "U8500";
-	case PRCMU_FW_PROJECT_U8500_C2:
-		return "U8500 C2";
+	case PRCMU_FW_PROJECT_U8400:
+		return "U8400";
 	case PRCMU_FW_PROJECT_U9500:
 		return "U9500";
-	case PRCMU_FW_PROJECT_U9500_C2:
-		return "U9500 C2";
+	case PRCMU_FW_PROJECT_U8500_MBB:
+		return "U8500 MBB";
+	case PRCMU_FW_PROJECT_U8500_C1:
+		return "U8500 C1";
+	case PRCMU_FW_PROJECT_U8500_C2:
+		return "U8500 C2";
+	case PRCMU_FW_PROJECT_U8500_C3:
+		return "U8500 C3";
+	case PRCMU_FW_PROJECT_U8500_C4:
+		return "U8500 C4";
+	case PRCMU_FW_PROJECT_U9500_MBL:
+		return "U9500 MBL";
+	case PRCMU_FW_PROJECT_U8500_MBL:
+		return "U8500 MBL";
+	case PRCMU_FW_PROJECT_U8500_MBL2:
+		return "U8500 MBL2";
 	case PRCMU_FW_PROJECT_U8520:
-		return "U8520";
+		return "U8520 MBL";
 	case PRCMU_FW_PROJECT_U8420:
 		return "U8420";
+	case PRCMU_FW_PROJECT_U9540:
+		return "U9540";
+	case PRCMU_FW_PROJECT_A9420:
+		return "A9420";
+	case PRCMU_FW_PROJECT_L8540:
+		return "L8540";
+	case PRCMU_FW_PROJECT_L8580:
+		return "L8580";
 	default:
 		return "Unknown";
 	}
@@ -2766,36 +2783,44 @@
 	return 0;
 }
 
+static void dbx500_fw_version_init(struct platform_device *pdev,
+			    u32 version_offset)
+{
+	struct resource *res;
+	void __iomem *tcpm_base;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "prcmu-tcpm");
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Error: no prcmu tcpm memory region provided\n");
+		return;
+	}
+	tcpm_base = ioremap(res->start, resource_size(res));
+	if (tcpm_base != NULL) {
+		u32 version;
+
+		version = readl(tcpm_base + version_offset);
+		fw_info.version.project = (version & 0xFF);
+		fw_info.version.api_version = (version >> 8) & 0xFF;
+		fw_info.version.func_version = (version >> 16) & 0xFF;
+		fw_info.version.errata = (version >> 24) & 0xFF;
+		strncpy(fw_info.version.project_name,
+			fw_project_name(fw_info.version.project),
+			PRCMU_FW_PROJECT_NAME_LEN);
+		fw_info.valid = true;
+		pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
+			fw_info.version.project_name,
+			fw_info.version.project,
+			fw_info.version.api_version,
+			fw_info.version.func_version,
+			fw_info.version.errata);
+		iounmap(tcpm_base);
+	}
+}
+
 void __init db8500_prcmu_early_init(void)
 {
-	if (cpu_is_u8500v2() || cpu_is_u9540()) {
-		void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
-
-		if (tcpm_base != NULL) {
-			u32 version;
-			version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
-			fw_info.version.project = version & 0xFF;
-			fw_info.version.api_version = (version >> 8) & 0xFF;
-			fw_info.version.func_version = (version >> 16) & 0xFF;
-			fw_info.version.errata = (version >> 24) & 0xFF;
-			fw_info.valid = true;
-			pr_info("PRCMU firmware: %s, version %d.%d.%d\n",
-				fw_project_name(fw_info.version.project),
-				(version >> 8) & 0xFF, (version >> 16) & 0xFF,
-				(version >> 24) & 0xFF);
-			iounmap(tcpm_base);
-		}
-
-		if (cpu_is_u9540())
-			tcdm_base = ioremap_nocache(U8500_PRCMU_TCDM_BASE,
-						SZ_4K + SZ_8K) + SZ_8K;
-		else
-			tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
-	} else {
-		pr_err("prcmu: Unsupported chip version\n");
-		BUG();
-	}
-
 	spin_lock_init(&mb0_transfer.lock);
 	spin_lock_init(&mb0_transfer.dbb_irqs_lock);
 	mutex_init(&mb0_transfer.ac_wake_lock);
@@ -3105,23 +3130,30 @@
  */
 static int db8500_prcmu_probe(struct platform_device *pdev)
 {
-	struct ab8500_platform_data *ab8500_platdata = pdev->dev.platform_data;
 	struct device_node *np = pdev->dev.of_node;
+	struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev);
 	int irq = 0, err = 0, i;
-
-	if (ux500_is_svp())
-		return -ENODEV;
+	struct resource *res;
 
 	init_prcm_registers();
 
+	dbx500_fw_version_init(pdev, pdata->version_offset);
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
+	if (!res) {
+		dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
+		return -ENOENT;
+	}
+	tcdm_base = devm_ioremap(&pdev->dev, res->start,
+			resource_size(res));
+
 	/* Clean up the mailbox interrupts after pre-kernel code. */
 	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
 
-	if (np)
-		irq = platform_get_irq(pdev, 0);
-
-	if (!np || irq <= 0)
-		irq = IRQ_DB8500_PRCMU1;
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev, "no prcmu irq provided\n");
+		return -ENOENT;
+	}
 
 	err = request_threaded_irq(irq, prcmu_irq_handler,
 	        prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
@@ -3135,13 +3167,12 @@
 
 	for (i = 0; i < ARRAY_SIZE(db8500_prcmu_devs); i++) {
 		if (!strcmp(db8500_prcmu_devs[i].name, "ab8500-core")) {
-			db8500_prcmu_devs[i].platform_data = ab8500_platdata;
+			db8500_prcmu_devs[i].platform_data = pdata->ab_platdata;
 			db8500_prcmu_devs[i].pdata_size = sizeof(struct ab8500_platform_data);
 		}
 	}
 
-	if (cpu_is_u8500v20_or_later())
-		prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
+	prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
 
 	db8500_prcmu_update_cpufreq();
 
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index c1fe60ad..afa12c7 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -149,6 +149,24 @@
 #define TRACE_SYSCALLS()
 #endif
 
+#ifdef CONFIG_CLKSRC_OF
+#define CLKSRC_OF_TABLES() . = ALIGN(8);				\
+			   VMLINUX_SYMBOL(__clksrc_of_table) = .;	\
+			   *(__clksrc_of_table)				\
+			   *(__clksrc_of_table_end)
+#else
+#define CLKSRC_OF_TABLES()
+#endif
+
+#ifdef CONFIG_IRQCHIP
+#define IRQCHIP_OF_MATCH_TABLE()					\
+	. = ALIGN(8);							\
+	VMLINUX_SYMBOL(__irqchip_begin) = .;				\
+	*(__irqchip_of_table)		  				\
+	*(__irqchip_of_end)
+#else
+#define IRQCHIP_OF_MATCH_TABLE()
+#endif
 
 #ifdef CONFIG_COMMON_CLK
 #define CLK_OF_TABLES() . = ALIGN(8);				\
@@ -503,7 +521,9 @@
 	CPU_DISCARD(init.rodata)					\
 	MEM_DISCARD(init.rodata)					\
 	CLK_OF_TABLES()							\
-	KERNEL_DTB()
+	CLKSRC_OF_TABLES()						\
+	KERNEL_DTB()							\
+	IRQCHIP_OF_MATCH_TABLE()
 
 #define INIT_TEXT							\
 	*(.init.text)							\
diff --git a/include/linux/bcm2835_timer.h b/include/linux/bcm2835_timer.h
deleted file mode 100644
index 25680fe..0000000
--- a/include/linux/bcm2835_timer.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2012 Simon Arlott
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __BCM2835_TIMER_H
-#define __BCM2835_TIMER_H
-
-#include <asm/mach/time.h>
-
-extern struct sys_timer bcm2835_timer;
-
-#endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 4dceaf8..27cfda4 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -332,4 +332,15 @@
 
 extern int clocksource_i8253_init(void);
 
+#ifdef CONFIG_CLKSRC_OF
+extern void clocksource_of_init(void);
+
+#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)			\
+	static const struct of_device_id __clksrc_of_table_##name	\
+		__used __section(__clksrc_of_table)			\
+		 = { .compatible = compat, .data = fn };
+#else
+#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)
+#endif
+
 #endif /* _LINUX_CLOCKSOURCE_H */
diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
index 1148575..dd755ce 100644
--- a/include/linux/dw_apb_timer.h
+++ b/include/linux/dw_apb_timer.h
@@ -53,5 +53,5 @@
 cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs);
 void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs);
 
-extern struct sys_timer dw_apb_timer;
+extern void dw_apb_timer_init(void);
 #endif /* __DW_APB_TIMER_H__ */
diff --git a/include/linux/irqchip.h b/include/linux/irqchip.h
new file mode 100644
index 0000000..e0006f1
--- /dev/null
+++ b/include/linux/irqchip.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _LINUX_IRQCHIP_H
+#define _LINUX_IRQCHIP_H
+
+void irqchip_init(void);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/gic.h b/include/linux/irqchip/arm-gic.h
similarity index 76%
rename from arch/arm/include/asm/hardware/gic.h
rename to include/linux/irqchip/arm-gic.h
index 4b1ce6c..a67ca55 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -1,5 +1,5 @@
 /*
- *  arch/arm/include/asm/hardware/gic.h
+ *  include/linux/irqchip/arm-gic.h
  *
  *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
  *
@@ -7,10 +7,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef __ASM_ARM_HARDWARE_GIC_H
-#define __ASM_ARM_HARDWARE_GIC_H
-
-#include <linux/compiler.h>
+#ifndef __LINUX_IRQCHIP_ARM_GIC_H
+#define __LINUX_IRQCHIP_ARM_GIC_H
 
 #define GIC_CPU_CTRL			0x00
 #define GIC_CPU_PRIMASK			0x04
@@ -32,19 +30,14 @@
 #define GIC_DIST_CONFIG			0xc00
 #define GIC_DIST_SOFTINT		0xf00
 
-#ifndef __ASSEMBLY__
-#include <linux/irqdomain.h>
 struct device_node;
 
 extern struct irq_chip gic_arch_extn;
 
 void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
 		    u32 offset, struct device_node *);
-int gic_of_init(struct device_node *node, struct device_node *parent);
 void gic_secondary_init(unsigned int);
-void gic_handle_irq(struct pt_regs *regs);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 
 static inline void gic_init(unsigned int nr, int start,
 			    void __iomem *dist , void __iomem *cpu)
@@ -53,5 +46,3 @@
 }
 
 #endif
-
-#endif
diff --git a/arch/arm/include/asm/hardware/vic.h b/include/linux/irqchip/arm-vic.h
similarity index 63%
rename from arch/arm/include/asm/hardware/vic.h
rename to include/linux/irqchip/arm-vic.h
index 2bebad3..e3c82dc 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/include/linux/irqchip/arm-vic.h
@@ -20,29 +20,11 @@
 #ifndef __ASM_ARM_HARDWARE_VIC_H
 #define __ASM_ARM_HARDWARE_VIC_H
 
-#define VIC_IRQ_STATUS			0x00
-#define VIC_FIQ_STATUS			0x04
+#include <linux/types.h>
+
 #define VIC_RAW_STATUS			0x08
-#define VIC_INT_SELECT			0x0c	/* 1 = FIQ, 0 = IRQ */
 #define VIC_INT_ENABLE			0x10	/* 1 = enable, 0 = disable */
 #define VIC_INT_ENABLE_CLEAR		0x14
-#define VIC_INT_SOFT			0x18
-#define VIC_INT_SOFT_CLEAR		0x1c
-#define VIC_PROTECT			0x20
-#define VIC_PL190_VECT_ADDR		0x30	/* PL190 only */
-#define VIC_PL190_DEF_VECT_ADDR		0x34	/* PL190 only */
-
-#define VIC_VECT_ADDR0			0x100	/* 0 to 15 (0..31 PL192) */
-#define VIC_VECT_CNTL0			0x200	/* 0 to 15 (0..31 PL192) */
-#define VIC_ITCR			0x300	/* VIC test control register */
-
-#define VIC_VECT_CNTL_ENABLE		(1 << 5)
-
-#define VIC_PL192_VECT_ADDR		0xF00
-
-#ifndef __ASSEMBLY__
-#include <linux/compiler.h>
-#include <linux/types.h>
 
 struct device_node;
 struct pt_regs;
@@ -50,8 +32,5 @@
 void __vic_init(void __iomem *base, int irq_start, u32 vic_sources,
 		u32 resume_sources, struct device_node *node);
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
-int vic_of_init(struct device_node *node, struct device_node *parent);
-void vic_handle_irq(struct pt_regs *regs);
 
-#endif /* __ASSEMBLY__ */
 #endif
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 6ee4247..77a46ae 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -16,12 +16,6 @@
 /*
  * Registers
  */
-#define DB8500_PRCM_GPIOCR 0x138
-#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0	BIT(0)
-#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD	BIT(9)
-#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1	BIT(11)
-#define DB8500_PRCM_GPIOCR_SPI2_SELECT		BIT(23)
-
 #define DB8500_PRCM_LINE_VALUE 0x170
 #define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0	BIT(3)
 
@@ -493,20 +487,6 @@
 	u8 sva_policy;
 };
 
-#define PRCMU_FW_PROJECT_U8500		2
-#define PRCMU_FW_PROJECT_U9500		4
-#define PRCMU_FW_PROJECT_U8500_C2	7
-#define PRCMU_FW_PROJECT_U9500_C2	11
-#define PRCMU_FW_PROJECT_U8520		13
-#define PRCMU_FW_PROJECT_U8420		14
-
-struct prcmu_fw_version {
-	u8 project;
-	u8 api_version;
-	u8 func_version;
-	u8 errata;
-};
-
 #ifdef CONFIG_MFD_DB8500_PRCMU
 
 void db8500_prcmu_early_init(void);
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index c202d6c..f8bac7c 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -12,6 +12,10 @@
 #include <linux/notifier.h>
 #include <linux/err.h>
 
+/* Offset for the firmware version within the TCPM */
+#define DB8500_PRCMU_FW_VERSION_OFFSET 0xA4
+#define DBX540_PRCMU_FW_VERSION_OFFSET 0xA8
+
 /* PRCMU Wakeup defines */
 enum prcmu_wakeup_index {
 	PRCMU_WAKEUP_INDEX_RTC,
@@ -214,12 +218,52 @@
 	DDR_PWR_STATE_OFFHIGHLAT    = 0x03
 };
 
+#define DB8500_PRCMU_LEGACY_OFFSET		0xDD4
+
+struct prcmu_pdata
+{
+	bool enable_set_ddr_opp;
+	bool enable_ape_opp_100_voltage;
+	struct ab8500_platform_data *ab_platdata;
+	u32 version_offset;
+	u32 legacy_offset;
+	u32 adt_offset;
+};
+
+#define PRCMU_FW_PROJECT_U8500		2
+#define PRCMU_FW_PROJECT_U8400		3
+#define PRCMU_FW_PROJECT_U9500		4 /* Customer specific */
+#define PRCMU_FW_PROJECT_U8500_MBB	5
+#define PRCMU_FW_PROJECT_U8500_C1	6
+#define PRCMU_FW_PROJECT_U8500_C2	7
+#define PRCMU_FW_PROJECT_U8500_C3	8
+#define PRCMU_FW_PROJECT_U8500_C4	9
+#define PRCMU_FW_PROJECT_U9500_MBL	10
+#define PRCMU_FW_PROJECT_U8500_MBL	11 /* Customer specific */
+#define PRCMU_FW_PROJECT_U8500_MBL2	12 /* Customer specific */
+#define PRCMU_FW_PROJECT_U8520		13
+#define PRCMU_FW_PROJECT_U8420		14
+#define PRCMU_FW_PROJECT_A9420		20
+/* [32..63] 9540 and derivatives */
+#define PRCMU_FW_PROJECT_U9540		32
+/* [64..95] 8540 and derivatives */
+#define PRCMU_FW_PROJECT_L8540		64
+/* [96..126] 8580 and derivatives */
+#define PRCMU_FW_PROJECT_L8580		96
+
+#define PRCMU_FW_PROJECT_NAME_LEN	20
+struct prcmu_fw_version {
+	u32 project; /* Notice, project shifted with 8 on ux540 */
+	u8 api_version;
+	u8 func_version;
+	u8 errata;
+	char project_name[PRCMU_FW_PROJECT_NAME_LEN];
+};
+
 #include <linux/mfd/db8500-prcmu.h>
 
 #if defined(CONFIG_UX500_SOC_DB8500)
 
-#include <mach/id.h>
-
 static inline void __init prcmu_early_init(void)
 {
 	return db8500_prcmu_early_init();
@@ -626,85 +670,6 @@
 	prcmu_write_masked(reg, bits, 0);
 }
 
-#if defined(CONFIG_UX500_SOC_DB8500)
-
-/**
- * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
- */
-static inline void prcmu_enable_spi2(void)
-{
-	if (cpu_is_u8500())
-		prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
-}
-
-/**
- * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
- */
-static inline void prcmu_disable_spi2(void)
-{
-	if (cpu_is_u8500())
-		prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
-}
-
-/**
- * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD
- * and UARTMOD on OtherAlternateC3.
- */
-static inline void prcmu_enable_stm_mod_uart(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_set(DB8500_PRCM_GPIOCR,
-			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
-			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
-	}
-}
-
-/**
- * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD
- * and UARTMOD on OtherAlternateC3.
- */
-static inline void prcmu_disable_stm_mod_uart(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_clear(DB8500_PRCM_GPIOCR,
-			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
-			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
-	}
-}
-
-/**
- * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1.
- */
-static inline void prcmu_enable_stm_ape(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_set(DB8500_PRCM_GPIOCR,
-			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
-	}
-}
-
-/**
- * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1.
- */
-static inline void prcmu_disable_stm_ape(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_clear(DB8500_PRCM_GPIOCR,
-			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
-	}
-}
-
-#else
-
-static inline void prcmu_enable_spi2(void) {}
-static inline void prcmu_disable_spi2(void) {}
-static inline void prcmu_enable_stm_mod_uart(void) {}
-static inline void prcmu_disable_stm_mod_uart(void) {}
-static inline void prcmu_enable_stm_ape(void) {}
-static inline void prcmu_disable_stm_ape(void) {}
-
-#endif
-
 /* PRCMU QoS APE OPP class */
 #define PRCMU_QOS_APE_OPP 1
 #define PRCMU_QOS_DDR_OPP 2
diff --git a/include/linux/sunxi_timer.h b/include/linux/sunxi_timer.h
index b9165bb..1808178 100644
--- a/include/linux/sunxi_timer.h
+++ b/include/linux/sunxi_timer.h
@@ -19,6 +19,6 @@
 
 #include <asm/mach/time.h>
 
-extern struct sys_timer sunxi_timer;
+void sunxi_timer_init(void);
 
 #endif
diff --git a/include/linux/time.h b/include/linux/time.h
index a3ab6a8..d4835df 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -154,9 +154,7 @@
  * finer then tick granular time.
  */
 #ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern u32 arch_gettimeoffset(void);
-#else
-static inline u32 arch_gettimeoffset(void) { return 0; }
+extern u32 (*arch_gettimeoffset)(void);
 #endif
 
 extern void do_gettimeofday(struct timeval *tv);
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 30b6de0..c6d6400 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -339,6 +339,7 @@
 	clockevents_config(dev, freq);
 	clockevents_register_device(dev);
 }
+EXPORT_SYMBOL_GPL(clockevents_config_and_register);
 
 /**
  * clockevents_update_freq - Update frequency and reprogram a clock event device.
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 1e35515..9a0bc98 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -138,6 +138,20 @@
 }
 
 /* Timekeeper helper functions. */
+
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+u32 (*arch_gettimeoffset)(void);
+
+u32 get_arch_timeoffset(void)
+{
+	if (likely(arch_gettimeoffset))
+		return arch_gettimeoffset();
+	return 0;
+}
+#else
+static inline u32 get_arch_timeoffset(void) { return 0; }
+#endif
+
 static inline s64 timekeeping_get_ns(struct timekeeper *tk)
 {
 	cycle_t cycle_now, cycle_delta;
@@ -154,8 +168,8 @@
 	nsec = cycle_delta * tk->mult + tk->xtime_nsec;
 	nsec >>= tk->shift;
 
-	/* If arch requires, add in gettimeoffset() */
-	return nsec + arch_gettimeoffset();
+	/* If arch requires, add in get_arch_timeoffset() */
+	return nsec + get_arch_timeoffset();
 }
 
 static inline s64 timekeeping_get_ns_raw(struct timekeeper *tk)
@@ -174,8 +188,8 @@
 	/* convert delta to nanoseconds. */
 	nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
 
-	/* If arch requires, add in gettimeoffset() */
-	return nsec + arch_gettimeoffset();
+	/* If arch requires, add in get_arch_timeoffset() */
+	return nsec + get_arch_timeoffset();
 }
 
 static RAW_NOTIFIER_HEAD(pvclock_gtod_chain);
@@ -257,8 +271,8 @@
 
 	tk->xtime_nsec += cycle_delta * tk->mult;
 
-	/* If arch requires, add in gettimeoffset() */
-	tk->xtime_nsec += (u64)arch_gettimeoffset() << tk->shift;
+	/* If arch requires, add in get_arch_timeoffset() */
+	tk->xtime_nsec += (u64)get_arch_timeoffset() << tk->shift;
 
 	tk_normalize_xtime(tk);
 
diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c
index 3870e96..15a3817 100644
--- a/sound/soc/samsung/h1940_uda1380.c
+++ b/sound/soc/samsung/h1940_uda1380.c
@@ -21,7 +21,6 @@
 #include <sound/jack.h>
 
 #include <plat/regs-iis.h>
-#include <mach/h1940-latch.h>
 #include <asm/mach-types.h>
 
 #include "s3c24xx-i2s.h"
@@ -147,9 +146,9 @@
 				struct snd_kcontrol *kcontrol, int event)
 {
 	if (SND_SOC_DAPM_EVENT_ON(event))
-		gpio_set_value(H1940_LATCH_AUDIO_POWER, 1);
+		gpio_set_value(S3C_GPIO_END + 9, 1);
 	else
-		gpio_set_value(H1940_LATCH_AUDIO_POWER, 0);
+		gpio_set_value(S3C_GPIO_END + 9, 0);
 
 	return 0;
 }
@@ -233,11 +232,11 @@
 		return -ENODEV;
 
 	/* configure some gpios */
-	ret = gpio_request(H1940_LATCH_AUDIO_POWER, "speaker-power");
+	ret = gpio_request(S3C_GPIO_END + 9, "speaker-power");
 	if (ret)
 		goto err_out;
 
-	ret = gpio_direction_output(H1940_LATCH_AUDIO_POWER, 0);
+	ret = gpio_direction_output(S3C_GPIO_END + 9, 0);
 	if (ret)
 		goto err_gpio;
 
@@ -258,7 +257,7 @@
 err_plat:
 	platform_device_put(s3c24xx_snd_device);
 err_gpio:
-	gpio_free(H1940_LATCH_AUDIO_POWER);
+	gpio_free(S3C_GPIO_END + 9);
 
 err_out:
 	return ret;
@@ -269,7 +268,7 @@
 	platform_device_unregister(s3c24xx_snd_device);
 	snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
 		hp_jack_gpios);
-	gpio_free(H1940_LATCH_AUDIO_POWER);
+	gpio_free(S3C_GPIO_END + 9);
 }
 
 module_init(h1940_init);
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index c7e965f..a301d8c 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -237,7 +237,7 @@
 {
 	gta02_speaker_enabled = ucontrol->value.integer.value[0];
 
-	gpio_set_value(GTA02_GPIO_HP_IN, !gta02_speaker_enabled);
+	gpio_set_value(S3C2410_GPJ(2), !gta02_speaker_enabled);
 
 	return 0;
 }
@@ -252,7 +252,7 @@
 static int lm4853_event(struct snd_soc_dapm_widget *w,
 			struct snd_kcontrol *k, int event)
 {
-	gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event));
+	gpio_set_value(S3C2410_GPJ(1), SND_SOC_DAPM_EVENT_OFF(event));
 
 	return 0;
 }
@@ -396,8 +396,8 @@
 };
 
 static const struct gpio neo1973_gta02_gpios[] = {
-	{ GTA02_GPIO_HP_IN, GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
-	{ GTA02_GPIO_AMP_SHUT, GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
+	{ S3C2410_GPJ(2), GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
+	{ S3C2410_GPJ(1), GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
 };
 
 static struct snd_soc_card neo1973 = {