i2c: ocores: support big-endian register layout
This allows using OpenCores I2C controller attached to its host in
native-endian mode with bi-endian CPUs. Example of such system is Xtensa
XTFPGA platform.
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index abf5db7..11b7b87 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -92,6 +92,16 @@
iowrite32(value, i2c->base + (reg << i2c->reg_shift));
}
+static void oc_setreg_16be(struct ocores_i2c *i2c, int reg, u8 value)
+{
+ iowrite16be(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_32be(struct ocores_i2c *i2c, int reg, u8 value)
+{
+ iowrite32be(value, i2c->base + (reg << i2c->reg_shift));
+}
+
static inline u8 oc_getreg_8(struct ocores_i2c *i2c, int reg)
{
return ioread8(i2c->base + (reg << i2c->reg_shift));
@@ -107,6 +117,16 @@
return ioread32(i2c->base + (reg << i2c->reg_shift));
}
+static inline u8 oc_getreg_16be(struct ocores_i2c *i2c, int reg)
+{
+ return ioread16be(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg)
+{
+ return ioread32be(i2c->base + (reg << i2c->reg_shift));
+}
+
static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
{
i2c->setreg(i2c, reg, value);
@@ -428,6 +448,9 @@
i2c->reg_io_width = 1; /* Set to default value */
if (!i2c->setreg || !i2c->getreg) {
+ bool be = pdata ? pdata->big_endian :
+ of_device_is_big_endian(pdev->dev.of_node);
+
switch (i2c->reg_io_width) {
case 1:
i2c->setreg = oc_setreg_8;
@@ -435,13 +458,13 @@
break;
case 2:
- i2c->setreg = oc_setreg_16;
- i2c->getreg = oc_getreg_16;
+ i2c->setreg = be ? oc_setreg_16be : oc_setreg_16;
+ i2c->getreg = be ? oc_getreg_16be : oc_getreg_16;
break;
case 4:
- i2c->setreg = oc_setreg_32;
- i2c->getreg = oc_getreg_32;
+ i2c->setreg = be ? oc_setreg_32be : oc_setreg_32;
+ i2c->getreg = be ? oc_getreg_32be : oc_getreg_32;
break;
default:
diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h
index 1c06b5c..01edd96 100644
--- a/include/linux/i2c-ocores.h
+++ b/include/linux/i2c-ocores.h
@@ -15,6 +15,7 @@
u32 reg_shift; /* register offset shift value */
u32 reg_io_width; /* register io read/write width */
u32 clock_khz; /* input clock in kHz */
+ bool big_endian; /* registers are big endian */
u8 num_devices; /* number of devices in the devices list */
struct i2c_board_info const *devices; /* devices connected to the bus */
};