libata: implement ATA_FLAG_IGN_SIMPLEX and use it in sata_uli
Some uli controllers have stuck SIMPLEX bit which can't be cleared
with ata_pci_clear_simplex(), but the controller is capable of doing
DMAs on both channels simultaneously. Implement ATA_FLAG_IGN_SIMPLEX
which makes libata ignore the simplex bit and use it in sata_uli.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 623cec9..114fa81d 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -870,7 +870,8 @@
pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
bmdma = pci_resource_start(pdev, 4);
if (bmdma) {
- if (inb(bmdma + 2) & 0x80)
+ if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
probe_ent->port[p].bmdma_addr = bmdma;
}
@@ -886,7 +887,8 @@
bmdma = pci_resource_start(pdev, 4);
if (bmdma) {
bmdma += 8;
- if(inb(bmdma + 2) & 0x80)
+ if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
probe_ent->port[p].bmdma_addr = bmdma;
}
@@ -920,7 +922,8 @@
probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL;
if (bmdma) {
probe_ent->port[0].bmdma_addr = bmdma;
- if (inb(bmdma + 2) & 0x80)
+ if ((!(port[0]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
}
ata_std_ports(&probe_ent->port[0]);
@@ -937,7 +940,8 @@
probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL;
if (bmdma) {
probe_ent->port[1].bmdma_addr = bmdma + 8;
- if (inb(bmdma + 10) & 0x80)
+ if ((!(port[1]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 10) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
}
ata_std_ports(&probe_ent->port[1]);
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 5c603ca..a43aec6 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -128,7 +128,8 @@
static struct ata_port_info uli_port_info = {
.sht = &uli_sht,
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &uli_ops,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index df76fc4..22aa69e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -177,6 +177,7 @@
* Register FIS clearing BSY */
ATA_FLAG_DEBUGMSG = (1 << 13),
ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */
+ ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
/* The following flag belongs to ap->pflags but is kept in
* ap->flags because it's referenced in many LLDs and will be