[BNX2]: Add link-down workaround on 5706 serdes.
In some blade systems using the 5706 serdes, the hardware sometimes
does not properly generate link down interrupts. We add a workaround
in the driver's timer to force a link-down when some PHY registers
report loss of SYNC.
The parallel detect logic is cleaned up slightly to better integrate
the workaround.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 18ed806..c03f677 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1186,6 +1186,19 @@
bnx2_write_phy(bp, bp->mii_bmcr, bmcr);
}
+static void
+bnx2_5706s_force_link_dn(struct bnx2 *bp, int start)
+{
+ u32 val;
+
+ bnx2_write_phy(bp, MII_BNX2_DSP_ADDRESS, MII_EXPAND_SERDES_CTL);
+ bnx2_read_phy(bp, MII_BNX2_DSP_RW_PORT, &val);
+ if (start)
+ bnx2_write_phy(bp, MII_BNX2_DSP_RW_PORT, val & 0xff0f);
+ else
+ bnx2_write_phy(bp, MII_BNX2_DSP_RW_PORT, val | 0xc0);
+}
+
static int
bnx2_set_link(struct bnx2 *bp)
{
@@ -1211,6 +1224,10 @@
(CHIP_NUM(bp) == CHIP_NUM_5706)) {
u32 val;
+ if (bp->phy_flags & PHY_FORCED_DOWN_FLAG) {
+ bnx2_5706s_force_link_dn(bp, 0);
+ bp->phy_flags &= ~PHY_FORCED_DOWN_FLAG;
+ }
val = REG_RD(bp, BNX2_EMAC_STATUS);
if (val & BNX2_EMAC_STATUS_LINK)
bmsr |= BMSR_LSTATUS;
@@ -1239,7 +1256,15 @@
(bp->autoneg & AUTONEG_SPEED))
bnx2_disable_forced_2g5(bp);
- bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG;
+ if (bp->phy_flags & PHY_PARALLEL_DETECT_FLAG) {
+ u32 bmcr;
+
+ bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
+ bmcr |= BMCR_ANENABLE;
+ bnx2_write_phy(bp, bp->mii_bmcr, bmcr);
+
+ bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG;
+ }
bp->link_up = 0;
}
@@ -5276,13 +5301,51 @@
return -ENODEV;
}
+static int
+bnx2_5706_serdes_has_link(struct bnx2 *bp)
+{
+ u32 mode_ctl, an_dbg, exp;
+
+ bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_MODE_CTL);
+ bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &mode_ctl);
+
+ if (!(mode_ctl & MISC_SHDW_MODE_CTL_SIG_DET))
+ return 0;
+
+ bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_AN_DBG);
+ bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &an_dbg);
+ bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &an_dbg);
+
+ if (an_dbg & MISC_SHDW_AN_DBG_NOSYNC)
+ return 0;
+
+ bnx2_write_phy(bp, MII_BNX2_DSP_ADDRESS, MII_EXPAND_REG1);
+ bnx2_read_phy(bp, MII_BNX2_DSP_RW_PORT, &exp);
+ bnx2_read_phy(bp, MII_BNX2_DSP_RW_PORT, &exp);
+
+ if (exp & MII_EXPAND_REG1_RUDI_C) /* receiving CONFIG */
+ return 0;
+
+ return 1;
+}
+
static void
bnx2_5706_serdes_timer(struct bnx2 *bp)
{
+ int check_link = 1;
+
spin_lock(&bp->phy_lock);
- if (bp->serdes_an_pending)
+ if (bp->phy_flags & PHY_FORCED_DOWN_FLAG) {
+ bnx2_5706s_force_link_dn(bp, 0);
+ bp->phy_flags &= ~PHY_FORCED_DOWN_FLAG;
+ spin_unlock(&bp->phy_lock);
+ return;
+ }
+
+ if (bp->serdes_an_pending) {
bp->serdes_an_pending--;
- else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) {
+ check_link = 0;
+ } else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) {
u32 bmcr;
bp->current_interval = bp->timer_interval;
@@ -5290,19 +5353,7 @@
bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
if (bmcr & BMCR_ANENABLE) {
- u32 phy1, phy2;
-
- bnx2_write_phy(bp, 0x1c, 0x7c00);
- bnx2_read_phy(bp, 0x1c, &phy1);
-
- bnx2_write_phy(bp, 0x17, 0x0f01);
- bnx2_read_phy(bp, 0x15, &phy2);
- bnx2_write_phy(bp, 0x17, 0x0f01);
- bnx2_read_phy(bp, 0x15, &phy2);
-
- if ((phy1 & 0x10) && /* SIGNAL DETECT */
- !(phy2 & 0x20)) { /* no CONFIG */
-
+ if (bnx2_5706_serdes_has_link(bp)) {
bmcr &= ~BMCR_ANENABLE;
bmcr |= BMCR_SPEED1000 | BMCR_FULLDPLX;
bnx2_write_phy(bp, bp->mii_bmcr, bmcr);
@@ -5314,6 +5365,7 @@
(bp->phy_flags & PHY_PARALLEL_DETECT_FLAG)) {
u32 phy2;
+ check_link = 0;
bnx2_write_phy(bp, 0x17, 0x0f01);
bnx2_read_phy(bp, 0x15, &phy2);
if (phy2 & 0x20) {
@@ -5328,6 +5380,18 @@
} else
bp->current_interval = bp->timer_interval;
+ if (bp->link_up && (bp->autoneg & AUTONEG_SPEED) && check_link) {
+ u32 val;
+
+ bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_AN_DBG);
+ bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &val);
+ bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &val);
+
+ if (val & MISC_SHDW_AN_DBG_NOSYNC) {
+ bnx2_5706s_force_link_dn(bp, 1);
+ bp->phy_flags |= PHY_FORCED_DOWN_FLAG;
+ }
+ }
spin_unlock(&bp->phy_lock);
}
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index c1ab30b..31a030a 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6344,6 +6344,15 @@
#define MII_BNX2_DSP_RW_PORT 0x15
#define MII_BNX2_DSP_ADDRESS 0x17
#define MII_BNX2_DSP_EXPAND_REG 0x0f00
+#define MII_EXPAND_REG1 (MII_BNX2_DSP_EXPAND_REG | 1)
+#define MII_EXPAND_REG1_RUDI_C 0x20
+#define MII_EXPAND_SERDES_CTL (MII_BNX2_DSP_EXPAND_REG | 2)
+
+#define MII_BNX2_MISC_SHADOW 0x1c
+#define MISC_SHDW_AN_DBG 0x6800
+#define MISC_SHDW_AN_DBG_NOSYNC 0x0002
+#define MISC_SHDW_MODE_CTL 0x7c00
+#define MISC_SHDW_MODE_CTL_SIG_DET 0x0010
#define MII_BNX2_BLK_ADDR 0x1f
#define MII_BNX2_BLK_ADDR_IEEE0 0x0000
@@ -6643,6 +6652,7 @@
#define PHY_INT_MODE_LINK_READY_FLAG 0x200
#define PHY_DIS_EARLY_DAC_FLAG 0x400
#define REMOTE_PHY_CAP_FLAG 0x800
+#define PHY_FORCED_DOWN_FLAG 0x1000
u32 mii_bmcr;
u32 mii_bmsr;