intel_mid: Add Mrst & Mfld DMA Drivers
This patch add DMA drivers for DMA controllers in Langwell chipset
of Intel(R) Moorestown platform and DMA controllers in Penwell of
Intel(R) Medfield platfrom
This patch adds support for Moorestown DMAC1 and DMAC2 controllers.
It also add support for Medfiled GP DMA and DMAC1 controllers.
These controllers supports memory to peripheral and peripheral to
memory transfers. It support only single block transfers.
This driver is based on Kernel DMA engine
Anyone who wishes to use this controller should use DMA engine APIs
This controller exposes DMA_SLAVE capabilities and notifies the client drivers
of DMA transaction completion
Config option required to be enabled CONFIG_INTEL_MID_DMAC=y
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h
new file mode 100644
index 0000000..d81aa65
--- /dev/null
+++ b/drivers/dma/intel_mid_dma_regs.h
@@ -0,0 +1,260 @@
+/*
+ * intel_mid_dma_regs.h - Intel MID DMA Drivers
+ *
+ * Copyright (C) 2008-10 Intel Corp
+ * Author: Vinod Koul <vinod.koul@intel.com>
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *
+ */
+#ifndef __INTEL_MID_DMAC_REGS_H__
+#define __INTEL_MID_DMAC_REGS_H__
+
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/pci_ids.h>
+
+#define INTEL_MID_DMA_DRIVER_VERSION "1.0.5"
+
+#define REG_BIT0 0x00000001
+#define REG_BIT8 0x00000100
+
+#define UNMASK_INTR_REG(chan_num) \
+ ((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
+#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num)
+
+#define ENABLE_CHANNEL(chan_num) \
+ ((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
+
+#define DESCS_PER_CHANNEL 16
+/*DMA Registers*/
+/*registers associated with channel programming*/
+#define DMA_REG_SIZE 0x400
+#define DMA_CH_SIZE 0x58
+
+/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/
+#define SAR 0x00 /* Source Address Register*/
+#define DAR 0x08 /* Destination Address Register*/
+#define CTL_LOW 0x18 /* Control Register*/
+#define CTL_HIGH 0x1C /* Control Register*/
+#define CFG_LOW 0x40 /* Configuration Register Low*/
+#define CFG_HIGH 0x44 /* Configuration Register high*/
+
+#define STATUS_TFR 0x2E8
+#define STATUS_BLOCK 0x2F0
+#define STATUS_ERR 0x308
+
+#define RAW_TFR 0x2C0
+#define RAW_BLOCK 0x2C8
+#define RAW_ERR 0x2E0
+
+#define MASK_TFR 0x310
+#define MASK_BLOCK 0x318
+#define MASK_SRC_TRAN 0x320
+#define MASK_DST_TRAN 0x328
+#define MASK_ERR 0x330
+
+#define CLEAR_TFR 0x338
+#define CLEAR_BLOCK 0x340
+#define CLEAR_SRC_TRAN 0x348
+#define CLEAR_DST_TRAN 0x350
+#define CLEAR_ERR 0x358
+
+#define INTR_STATUS 0x360
+#define DMA_CFG 0x398
+#define DMA_CHAN_EN 0x3A0
+
+/*DMA channel control registers*/
+union intel_mid_dma_ctl_lo {
+ struct {
+ u32 int_en:1; /*enable or disable interrupts*/
+ /*should be 0*/
+ u32 dst_tr_width:3; /*destination transfer width*/
+ /*usually 32 bits = 010*/
+ u32 src_tr_width:3; /*source transfer width*/
+ /*usually 32 bits = 010*/
+ u32 dinc:2; /*destination address inc/dec*/
+ /*For mem:INC=00, Periphral NoINC=11*/
+ u32 sinc:2; /*source address inc or dec, as above*/
+ u32 dst_msize:3; /*destination burst transaction length*/
+ /*always = 16 ie 011*/
+ u32 src_msize:3; /*source burst transaction length*/
+ /*always = 16 ie 011*/
+ u32 reser1:3;
+ u32 tt_fc:3; /*transfer type and flow controller*/
+ /*M-M = 000
+ P-M = 010
+ M-P = 001*/
+ u32 dms:2; /*destination master select = 0*/
+ u32 sms:2; /*source master select = 0*/
+ u32 llp_dst_en:1; /*enable/disable destination LLP = 0*/
+ u32 llp_src_en:1; /*enable/disable source LLP = 0*/
+ u32 reser2:3;
+ } ctlx;
+ u32 ctl_lo;
+};
+
+union intel_mid_dma_ctl_hi {
+ struct {
+ u32 block_ts:12; /*block transfer size*/
+ /*configured by DMAC*/
+ u32 reser:20;
+ } ctlx;
+ u32 ctl_hi;
+
+};
+
+/*DMA channel configuration registers*/
+union intel_mid_dma_cfg_lo {
+ struct {
+ u32 reser1:5;
+ u32 ch_prior:3; /*channel priority = 0*/
+ u32 ch_susp:1; /*channel suspend = 0*/
+ u32 fifo_empty:1; /*FIFO empty or not R bit = 0*/
+ u32 hs_sel_dst:1; /*select HW/SW destn handshaking*/
+ /*HW = 0, SW = 1*/
+ u32 hs_sel_src:1; /*select HW/SW src handshaking*/
+ u32 reser2:6;
+ u32 dst_hs_pol:1; /*dest HS interface polarity*/
+ u32 src_hs_pol:1; /*src HS interface polarity*/
+ u32 max_abrst:10; /*max AMBA burst len = 0 (no sw limit*/
+ u32 reload_src:1; /*auto reload src addr =1 if src is P*/
+ u32 reload_dst:1; /*AR destn addr =1 if dstn is P*/
+ } cfgx;
+ u32 cfg_lo;
+};
+
+union intel_mid_dma_cfg_hi {
+ struct {
+ u32 fcmode:1; /*flow control mode = 1*/
+ u32 fifo_mode:1; /*FIFO mode select = 1*/
+ u32 protctl:3; /*protection control = 0*/
+ u32 rsvd:2;
+ u32 src_per:4; /*src hw HS interface*/
+ u32 dst_per:4; /*dstn hw HS interface*/
+ u32 reser2:17;
+ } cfgx;
+ u32 cfg_hi;
+};
+
+/**
+ * struct intel_mid_dma_chan - internal mid representation of a DMA channel
+ * @chan: dma_chan strcture represetation for mid chan
+ * @ch_regs: MMIO register space pointer to channel register
+ * @dma_base: MMIO register space DMA engine base pointer
+ * @ch_id: DMA channel id
+ * @lock: channel spinlock
+ * @completed: DMA cookie
+ * @active_list: current active descriptors
+ * @queue: current queued up descriptors
+ * @free_list: current free descriptors
+ * @slave: dma slave struture
+ * @descs_allocated: total number of decsiptors allocated
+ * @dma: dma device struture pointer
+ * @in_use: bool representing if ch is in use or not
+ */
+struct intel_mid_dma_chan {
+ struct dma_chan chan;
+ void __iomem *ch_regs;
+ void __iomem *dma_base;
+ int ch_id;
+ spinlock_t lock;
+ dma_cookie_t completed;
+ struct list_head active_list;
+ struct list_head queue;
+ struct list_head free_list;
+ struct intel_mid_dma_slave *slave;
+ unsigned int descs_allocated;
+ struct middma_device *dma;
+ bool in_use;
+};
+
+static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan(
+ struct dma_chan *chan)
+{
+ return container_of(chan, struct intel_mid_dma_chan, chan);
+}
+
+/**
+ * struct middma_device - internal representation of a DMA device
+ * @pdev: PCI device
+ * @dma_base: MMIO register space pointer of DMA
+ * @dma_pool: for allocating DMA descriptors
+ * @common: embedded struct dma_device
+ * @tasklet: dma tasklet for processing interrupts
+ * @ch: per channel data
+ * @pci_id: DMA device PCI ID
+ * @intr_mask: Interrupt mask to be used
+ * @mask_reg: MMIO register for periphral mask
+ * @chan_base: Base ch index (read from driver data)
+ * @max_chan: max number of chs supported (from drv_data)
+ * @block_size: Block size of DMA transfer supported (from drv_data)
+ * @pimr_mask: MMIO register addr for periphral interrupt (from drv_data)
+ */
+struct middma_device {
+ struct pci_dev *pdev;
+ void __iomem *dma_base;
+ struct pci_pool *dma_pool;
+ struct dma_device common;
+ struct tasklet_struct tasklet;
+ struct intel_mid_dma_chan ch[MAX_CHAN];
+ unsigned int pci_id;
+ unsigned int intr_mask;
+ void __iomem *mask_reg;
+ int chan_base;
+ int max_chan;
+ int block_size;
+ unsigned int pimr_mask;
+};
+
+static inline struct middma_device *to_middma_device(struct dma_device *common)
+{
+ return container_of(common, struct middma_device, common);
+}
+
+struct intel_mid_dma_desc {
+ void __iomem *block; /*ch ptr*/
+ struct list_head desc_node;
+ struct dma_async_tx_descriptor txd;
+ size_t len;
+ dma_addr_t sar;
+ dma_addr_t dar;
+ u32 cfg_hi;
+ u32 cfg_lo;
+ u32 ctl_lo;
+ u32 ctl_hi;
+ dma_addr_t next;
+ enum dma_data_direction dirn;
+ enum dma_status status;
+ enum intel_mid_dma_width width; /*width of DMA txn*/
+ enum intel_mid_dma_mode cfg_mode; /*mode configuration*/
+
+};
+
+static inline int test_ch_en(void __iomem *dma, u32 ch_no)
+{
+ u32 en_reg = ioread32(dma + DMA_CHAN_EN);
+ return (en_reg >> ch_no) & 0x1;
+}
+
+static inline struct intel_mid_dma_desc *to_intel_mid_dma_desc
+ (struct dma_async_tx_descriptor *txd)
+{
+ return container_of(txd, struct intel_mid_dma_desc, txd);
+}
+#endif /*__INTEL_MID_DMAC_REGS_H__*/