drivers/iio/magnetometer/hid-sensor-magn-3d.c

/*
 * HID Sensors Driver
 * Copyright (c) 2012, Intel Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 *
 */
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/hid-sensor-hub.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include "../common/hid-sensors/hid-sensor-trigger.h"

enum magn_3d_channel {
	CHANNEL_SCAN_INDEX_X,
	CHANNEL_SCAN_INDEX_Y,
	CHANNEL_SCAN_INDEX_Z,
	CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP,
	CHANNEL_SCAN_INDEX_NORTH_TRUE_TILT_COMP,
	CHANNEL_SCAN_INDEX_NORTH_MAGN,
	CHANNEL_SCAN_INDEX_NORTH_TRUE,
	MAGN_3D_CHANNEL_MAX,
};

struct magn_3d_state {
	struct hid_sensor_hub_callbacks callbacks;
	struct hid_sensor_common common_attributes;
	struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX];

	/* dynamically sized array to hold sensor values */
	u32 *iio_vals;
	/* array of pointers to sensor value */
	u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX];

	int scale_pre_decml;
	int scale_post_decml;
	int scale_precision;
	int value_offset;
};

static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = {
	HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS,
	HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS,
	HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS,
	HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
	HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH,
	HID_USAGE_SENSOR_ORIENT_MAGN_NORTH,
	HID_USAGE_SENSOR_ORIENT_TRUE_NORTH,
};

/* Channel definitions */
static const struct iio_chan_spec magn_3d_channels[] = {
	{
		.type = IIO_MAGN,
		.modified = 1,
		.channel2 = IIO_MOD_X,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
		BIT(IIO_CHAN_INFO_SCALE) |
		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
		BIT(IIO_CHAN_INFO_HYSTERESIS),
	}, {
		.type = IIO_MAGN,
		.modified = 1,
		.channel2 = IIO_MOD_Y,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
		BIT(IIO_CHAN_INFO_SCALE) |
		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
		BIT(IIO_CHAN_INFO_HYSTERESIS),
	}, {
		.type = IIO_MAGN,
		.modified = 1,
		.channel2 = IIO_MOD_Z,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
		BIT(IIO_CHAN_INFO_SCALE) |
		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
		BIT(IIO_CHAN_INFO_HYSTERESIS),
	}, {
		.type = IIO_ROT,
		.modified = 1,
		.channel2 = IIO_MOD_NORTH_MAGN_TILT_COMP,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
		BIT(IIO_CHAN_INFO_SCALE) |
		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
		BIT(IIO_CHAN_INFO_HYSTERESIS),
	}, {
		.type = IIO_ROT,
		.modified = 1,
		.channel2 = IIO_MOD_NORTH_TRUE_TILT_COMP,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
		BIT(IIO_CHAN_INFO_SCALE) |
		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
		BIT(IIO_CHAN_INFO_HYSTERESIS),
	}, {
		.type = IIO_ROT,
		.modified = 1,
		.channel2 = IIO_MOD_NORTH_MAGN,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
		BIT(IIO_CHAN_INFO_SCALE) |
		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
		BIT(IIO_CHAN_INFO_HYSTERESIS),
	}, {
		.type = IIO_ROT,
		.modified = 1,
		.channel2 = IIO_MOD_NORTH_TRUE,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
		BIT(IIO_CHAN_INFO_SCALE) |
		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
		BIT(IIO_CHAN_INFO_HYSTERESIS),
	}
};

/* Adjust channel real bits based on report descriptor */
static void magn_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
						int channel, int size)
{
	channels[channel].scan_type.sign = 's';
	/* Real storage bits will change based on the report desc. */
	channels[channel].scan_type.realbits = size * 8;
	/* Maximum size of a sample to capture is u32 */
	channels[channel].scan_type.storagebits = sizeof(u32) * 8;
}

/* Channel read_raw handler */
static int magn_3d_read_raw(struct iio_dev *indio_dev,
			      struct iio_chan_spec const *chan,
			      int *val, int *val2,
			      long mask)
{
	struct magn_3d_state *magn_state = iio_priv(indio_dev);
	int report_id = -1;
	u32 address;
	int ret_type;
	s32 poll_value;

	*val = 0;
	*val2 = 0;
	switch (mask) {
	case 0:
		poll_value = hid_sensor_read_poll_value(
					&magn_state->common_attributes);
		if (poll_value < 0)
				return -EINVAL;

		hid_sensor_power_state(&magn_state->common_attributes, true);
		msleep_interruptible(poll_value * 2);

		report_id =
			magn_state->magn[chan->address].report_id;
		address = magn_3d_addresses[chan->address];
		if (report_id >= 0)
			*val = sensor_hub_input_attr_get_raw_value(
				magn_state->common_attributes.hsdev,
				HID_USAGE_SENSOR_COMPASS_3D, address,
				report_id,
				SENSOR_HUB_SYNC);
		else {
			*val = 0;
			hid_sensor_power_state(&magn_state->common_attributes,
						false);
			return -EINVAL;
		}
		hid_sensor_power_state(&magn_state->common_attributes, false);
		ret_type = IIO_VAL_INT;
		break;
	case IIO_CHAN_INFO_SCALE:
		*val = magn_state->scale_pre_decml;
		*val2 = magn_state->scale_post_decml;
		ret_type = magn_state->scale_precision;
		break;
	case IIO_CHAN_INFO_OFFSET:
		*val = magn_state->value_offset;
		ret_type = IIO_VAL_INT;
		break;
	case IIO_CHAN_INFO_SAMP_FREQ:
		ret_type = hid_sensor_read_samp_freq_value(
			&magn_state->common_attributes, val, val2);
		break;
	case IIO_CHAN_INFO_HYSTERESIS:
		ret_type = hid_sensor_read_raw_hyst_value(
			&magn_state->common_attributes, val, val2);
		break;
	default:
		ret_type = -EINVAL;
		break;
	}

	return ret_type;
}

/* Channel write_raw handler */
static int magn_3d_write_raw(struct iio_dev *indio_dev,
			       struct iio_chan_spec const *chan,
			       int val,
			       int val2,
			       long mask)
{
	struct magn_3d_state *magn_state = iio_priv(indio_dev);
	int ret = 0;

	switch (mask) {
	case IIO_CHAN_INFO_SAMP_FREQ:
		ret = hid_sensor_write_samp_freq_value(
				&magn_state->common_attributes, val, val2);
		break;
	case IIO_CHAN_INFO_HYSTERESIS:
		ret = hid_sensor_write_raw_hyst_value(
				&magn_state->common_attributes, val, val2);
		break;
	default:
		ret = -EINVAL;
	}

	return ret;
}

static const struct iio_info magn_3d_info = {
	.driver_module = THIS_MODULE,
	.read_raw = &magn_3d_read_raw,
	.write_raw = &magn_3d_write_raw,
};

/* Function to push data to buffer */
static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data)
{
	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
	iio_push_to_buffers(indio_dev, data);
}

/* Callback handler to send event after all samples are received and captured */
static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
				unsigned usage_id,
				void *priv)
{
	struct iio_dev *indio_dev = platform_get_drvdata(priv);
	struct magn_3d_state *magn_state = iio_priv(indio_dev);

	dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n");
	if (atomic_read(&magn_state->common_attributes.data_ready))
		hid_sensor_push_data(indio_dev, magn_state->iio_vals);

	return 0;
}

/* Capture samples in local storage */
static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
				unsigned usage_id,
				size_t raw_len, char *raw_data,
				void *priv)
{
	struct iio_dev *indio_dev = platform_get_drvdata(priv);
	struct magn_3d_state *magn_state = iio_priv(indio_dev);
	int offset;
	int ret = 0;
	u32 *iio_val = NULL;

	switch (usage_id) {
	case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS:
	case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS:
	case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS:
		offset = (usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS)
				+ CHANNEL_SCAN_INDEX_X;
	break;
	case HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH:
	case HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH:
	case HID_USAGE_SENSOR_ORIENT_MAGN_NORTH:
	case HID_USAGE_SENSOR_ORIENT_TRUE_NORTH:
		offset = (usage_id - HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH)
				+ CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP;
	break;
	default:
		return -EINVAL;
	}

	iio_val = magn_state->magn_val_addr[offset];

	if (iio_val != NULL)
		*iio_val = *((u32 *)raw_data);
	else
		ret = -EINVAL;

	return ret;
}

/* Parse report which is specific to an usage id*/
static int magn_3d_parse_report(struct platform_device *pdev,
				struct hid_sensor_hub_device *hsdev,
				struct iio_chan_spec **channels,
				int *chan_count,
				unsigned usage_id,
				struct magn_3d_state *st)
{
	int i;
	int attr_count = 0;
	struct iio_chan_spec *_channels;

	/* Scan for each usage attribute supported */
	for (i = 0; i < MAGN_3D_CHANNEL_MAX; i++) {
		int status;
		u32 address = magn_3d_addresses[i];

		/* Check if usage attribute exists in the sensor hub device */
		status = sensor_hub_input_get_attribute_info(hsdev,
			HID_INPUT_REPORT,
			usage_id,
			address,
			&(st->magn[i]));
		if (!status)
			attr_count++;
	}

	if (attr_count <= 0) {
		dev_err(&pdev->dev,
			"failed to find any supported usage attributes in report\n");
		return  -EINVAL;
	}

	dev_dbg(&pdev->dev, "magn_3d Found %d usage attributes\n",
			attr_count);
	dev_dbg(&pdev->dev, "magn_3d X: %x:%x Y: %x:%x Z: %x:%x\n",
			st->magn[0].index,
			st->magn[0].report_id,
			st->magn[1].index, st->magn[1].report_id,
			st->magn[2].index, st->magn[2].report_id);

	/* Setup IIO channel array */
	_channels = devm_kcalloc(&pdev->dev, attr_count,
				sizeof(struct iio_chan_spec),
				GFP_KERNEL);
	if (!_channels) {
		dev_err(&pdev->dev,
			"failed to allocate space for iio channels\n");
		return -ENOMEM;
	}

	st->iio_vals = devm_kcalloc(&pdev->dev, attr_count,
				sizeof(u32),
				GFP_KERNEL);
	if (!st->iio_vals) {
		dev_err(&pdev->dev,
			"failed to allocate space for iio values array\n");
		return -ENOMEM;
	}

	for (i = 0, *chan_count = 0;
	i < MAGN_3D_CHANNEL_MAX && *chan_count < attr_count;
	i++){
		if (st->magn[i].index >= 0) {
			/* Setup IIO channel struct */
			(_channels[*chan_count]) = magn_3d_channels[i];
			(_channels[*chan_count]).scan_index = *chan_count;
			(_channels[*chan_count]).address = i;

			/* Set magn_val_addr to iio value address */
			st->magn_val_addr[i] = &(st->iio_vals[*chan_count]);
			magn_3d_adjust_channel_bit_mask(_channels,
							*chan_count,
							st->magn[i].size);
			(*chan_count)++;
		}
	}

	if (*chan_count <= 0) {
		dev_err(&pdev->dev,
			"failed to find any magnetic channels setup\n");
		return -EINVAL;
	}

	*channels = _channels;

	dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n",
			*chan_count);

	st->scale_precision = hid_sensor_format_scale(
				HID_USAGE_SENSOR_COMPASS_3D,
				&st->magn[CHANNEL_SCAN_INDEX_X],
				&st->scale_pre_decml, &st->scale_post_decml);

	/* Set Sensitivity field ids, when there is no individual modifier */
	if (st->common_attributes.sensitivity.index < 0) {
		sensor_hub_input_get_attribute_info(hsdev,
			HID_FEATURE_REPORT, usage_id,
			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
			HID_USAGE_SENSOR_DATA_ORIENTATION,
			&st->common_attributes.sensitivity);
		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
			st->common_attributes.sensitivity.index,
			st->common_attributes.sensitivity.report_id);
	}

	return 0;
}

/* Function to initialize the processing for usage id */
static int hid_magn_3d_probe(struct platform_device *pdev)
{
	int ret = 0;
	static char *name = "magn_3d";
	struct iio_dev *indio_dev;
	struct magn_3d_state *magn_state;
	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
	struct iio_chan_spec *channels;
	int chan_count = 0;

	indio_dev = devm_iio_device_alloc(&pdev->dev,
					  sizeof(struct magn_3d_state));
	if (indio_dev == NULL)
		return -ENOMEM;

	platform_set_drvdata(pdev, indio_dev);

	magn_state = iio_priv(indio_dev);
	magn_state->common_attributes.hsdev = hsdev;
	magn_state->common_attributes.pdev = pdev;

	ret = hid_sensor_parse_common_attributes(hsdev,
				HID_USAGE_SENSOR_COMPASS_3D,
				&magn_state->common_attributes);
	if (ret) {
		dev_err(&pdev->dev, "failed to setup common attributes\n");
		return ret;
	}

	ret = magn_3d_parse_report(pdev, hsdev,
				&channels, &chan_count,
				HID_USAGE_SENSOR_COMPASS_3D, magn_state);
	if (ret) {
		dev_err(&pdev->dev, "failed to parse report\n");
		return ret;
	}

	indio_dev->channels = channels;
	indio_dev->num_channels = chan_count;
	indio_dev->dev.parent = &pdev->dev;
	indio_dev->info = &magn_3d_info;
	indio_dev->name = name;
	indio_dev->modes = INDIO_DIRECT_MODE;

	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
		NULL, NULL);
	if (ret) {
		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
		return ret;
	}
	atomic_set(&magn_state->common_attributes.data_ready, 0);
	ret = hid_sensor_setup_trigger(indio_dev, name,
					&magn_state->common_attributes);
	if (ret < 0) {
		dev_err(&pdev->dev, "trigger setup failed\n");
		goto error_unreg_buffer_funcs;
	}

	ret = iio_device_register(indio_dev);
	if (ret) {
		dev_err(&pdev->dev, "device register failed\n");
		goto error_remove_trigger;
	}

	magn_state->callbacks.send_event = magn_3d_proc_event;
	magn_state->callbacks.capture_sample = magn_3d_capture_sample;
	magn_state->callbacks.pdev = pdev;
	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D,
					&magn_state->callbacks);
	if (ret < 0) {
		dev_err(&pdev->dev, "callback reg failed\n");
		goto error_iio_unreg;
	}

	return ret;

error_iio_unreg:
	iio_device_unregister(indio_dev);
error_remove_trigger:
	hid_sensor_remove_trigger(&magn_state->common_attributes);
error_unreg_buffer_funcs:
	iio_triggered_buffer_cleanup(indio_dev);
	return ret;
}

/* Function to deinitialize the processing for usage id */
static int hid_magn_3d_remove(struct platform_device *pdev)
{
	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
	struct magn_3d_state *magn_state = iio_priv(indio_dev);

	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
	iio_device_unregister(indio_dev);
	hid_sensor_remove_trigger(&magn_state->common_attributes);
	iio_triggered_buffer_cleanup(indio_dev);

	return 0;
}

static struct platform_device_id hid_magn_3d_ids[] = {
	{
		/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
		.name = "HID-SENSOR-200083",
	},
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, hid_magn_3d_ids);

static struct platform_driver hid_magn_3d_platform_driver = {
	.id_table = hid_magn_3d_ids,
	.driver = {
		.name	= KBUILD_MODNAME,
	},
	.probe		= hid_magn_3d_probe,
	.remove		= hid_magn_3d_remove,
};
module_platform_driver(hid_magn_3d_platform_driver);

MODULE_DESCRIPTION("HID Sensor Magnetometer 3D");
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
MODULE_LICENSE("GPL");