drivers/net/phy/mdio-bcm-unimac.c - kernel/msm-4.9 - Gitiles

 /*
  * Broadcom UniMAC MDIO bus controller driver
  *
  * Copyright (C) 2014, Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */

 #include <linux/kernel.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/delay.h>

 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_mdio.h>

 #define MDIO_CMD		0x00
 #define  MDIO_START_BUSY	(1 << 29)
 #define  MDIO_READ_FAIL		(1 << 28)
 #define  MDIO_RD		(2 << 26)
 #define  MDIO_WR		(1 << 26)
 #define  MDIO_PMD_SHIFT		21
 #define  MDIO_PMD_MASK		0x1F
 #define  MDIO_REG_SHIFT		16
 #define  MDIO_REG_MASK		0x1F

 #define MDIO_CFG		0x04
 #define  MDIO_C22		(1 << 0)
 #define  MDIO_C45		0
 #define  MDIO_CLK_DIV_SHIFT	4
 #define  MDIO_CLK_DIV_MASK	0x3F
 #define  MDIO_SUPP_PREAMBLE	(1 << 12)

 struct unimac_mdio_priv {
 	struct mii_bus		*mii_bus;
 	void __iomem		*base;
 };

 static inline void unimac_mdio_start(struct unimac_mdio_priv *priv)
 {
 	u32 reg;

 	reg = __raw_readl(priv->base + MDIO_CMD);
 	reg |= MDIO_START_BUSY;
 	__raw_writel(reg, priv->base + MDIO_CMD);
 }

 static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv)
 {
 	return __raw_readl(priv->base + MDIO_CMD) & MDIO_START_BUSY;
 }

 static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 {
 	struct unimac_mdio_priv *priv = bus->priv;
 	unsigned int timeout = 1000;
 	u32 cmd;

 	/* Prepare the read operation */
 	cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT);
 	__raw_writel(cmd, priv->base + MDIO_CMD);

 	/* Start MDIO transaction */
 	unimac_mdio_start(priv);

 	do {
 		if (!unimac_mdio_busy(priv))
 			break;

 		usleep_range(1000, 2000);
 	} while (timeout--);

 	if (!timeout)
 		return -ETIMEDOUT;

 	cmd = __raw_readl(priv->base + MDIO_CMD);

 	/* Some broken devices are known not to release the line during
 	 * turn-around, e.g: Broadcom BCM53125 external switches, so check for
 	 * that condition here and ignore the MDIO controller read failure
 	 * indication.
 	 */
 	if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (cmd & MDIO_READ_FAIL))
 		return -EIO;

 	return cmd & 0xffff;
 }

 static int unimac_mdio_write(struct mii_bus *bus, int phy_id,
 			     int reg, u16 val)
 {
 	struct unimac_mdio_priv *priv = bus->priv;
 	unsigned int timeout = 1000;
 	u32 cmd;

 	/* Prepare the write operation */
 	cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) |
 		(reg << MDIO_REG_SHIFT) | (0xffff & val);
 	__raw_writel(cmd, priv->base + MDIO_CMD);

 	unimac_mdio_start(priv);

 	do {
 		if (!unimac_mdio_busy(priv))
 			break;

 		usleep_range(1000, 2000);
 	} while (timeout--);

 	if (!timeout)
 		return -ETIMEDOUT;

 	return 0;
 }

 /* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with
  * their internal MDIO management controller making them fail to successfully
  * be read from or written to for the first transaction.  We insert a dummy
  * BMSR read here to make sure that phy_get_device() and get_phy_id() can
  * correctly read the PHY MII_PHYSID1/2 registers and successfully register a
  * PHY device for this peripheral.
  *
  * Once the PHY driver is registered, we can workaround subsequent reads from
  * there (e.g: during system-wide power management).
  *
  * bus->reset is invoked before mdiobus_scan during mdiobus_register and is
  * therefore the right location to stick that workaround. Since we do not want
  * to read from non-existing PHYs, we either use bus->phy_mask or do a manual
  * Device Tree scan to limit the search area.
  */
 static int unimac_mdio_reset(struct mii_bus *bus)
 {
 	struct device_node *np = bus->dev.of_node;
 	struct device_node *child;
 	u32 read_mask = 0;
 	int addr;

 	if (!np) {
 		read_mask = ~bus->phy_mask;
 	} else {
 		for_each_available_child_of_node(np, child) {
 			addr = of_mdio_parse_addr(&bus->dev, child);
 			if (addr < 0)
 				continue;

 			read_mask |= 1 << addr;
 		}
 	}

 	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
 		if (read_mask & 1 << addr)
 			mdiobus_read(bus, addr, MII_BMSR);
 	}

 	return 0;
 }

 static int unimac_mdio_probe(struct platform_device *pdev)
 {
 	struct unimac_mdio_priv *priv;
 	struct device_node *np;
 	struct mii_bus *bus;
 	struct resource *r;
 	int ret;

 	np = pdev->dev.of_node;

 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;

 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);

 	/* Just ioremap, as this MDIO block is usually integrated into an
 	 * Ethernet MAC controller register range
 	 */
 	priv->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
 	if (!priv->base) {
 		dev_err(&pdev->dev, "failed to remap register\n");
 		return -ENOMEM;
 	}

 	priv->mii_bus = mdiobus_alloc();
 	if (!priv->mii_bus)
 		return -ENOMEM;

 	bus = priv->mii_bus;
 	bus->priv = priv;
 	bus->name = "unimac MII bus";
 	bus->parent = &pdev->dev;
 	bus->read = unimac_mdio_read;
 	bus->write = unimac_mdio_write;
 	bus->reset = unimac_mdio_reset;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);

 	bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
 	if (!bus->irq) {
 		ret = -ENOMEM;
 		goto out_mdio_free;
 	}

 	ret = of_mdiobus_register(bus, np);
 	if (ret) {
 		dev_err(&pdev->dev, "MDIO bus registration failed\n");
 		goto out_mdio_irq;
 	}

 	platform_set_drvdata(pdev, priv);

 	dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus at 0x%p\n", priv->base);

 	return 0;

 out_mdio_irq:
 	kfree(bus->irq);
 out_mdio_free:
 	mdiobus_free(bus);
 	return ret;
 }

 static int unimac_mdio_remove(struct platform_device *pdev)
 {
 	struct unimac_mdio_priv *priv = platform_get_drvdata(pdev);

 	mdiobus_unregister(priv->mii_bus);
 	kfree(priv->mii_bus->irq);
 	mdiobus_free(priv->mii_bus);

 	return 0;
 }

 static const struct of_device_id unimac_mdio_ids[] = {
 	{ .compatible = "brcm,genet-mdio-v4", },
 	{ .compatible = "brcm,genet-mdio-v3", },
 	{ .compatible = "brcm,genet-mdio-v2", },
 	{ .compatible = "brcm,genet-mdio-v1", },
 	{ .compatible = "brcm,unimac-mdio", },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, unimac_mdio_ids);

 static struct platform_driver unimac_mdio_driver = {
 	.driver = {
 		.name = "unimac-mdio",
 		.of_match_table = unimac_mdio_ids,
 	},
 	.probe	= unimac_mdio_probe,
 	.remove	= unimac_mdio_remove,
 };
 module_platform_driver(unimac_mdio_driver);

 MODULE_AUTHOR("Broadcom Corporation");
 MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:unimac-mdio");
	/*
	* Broadcom UniMAC MDIO bus controller driver
	*
	* Copyright (C) 2014, Broadcom Corporation
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*/

	#include <linux/kernel.h>
	#include <linux/phy.h>
	#include <linux/platform_device.h>
	#include <linux/sched.h>
	#include <linux/module.h>
	#include <linux/io.h>
	#include <linux/delay.h>

	#include <linux/of.h>
	#include <linux/of_platform.h>
	#include <linux/of_mdio.h>

	#define MDIO_CMD 0x00
	#define MDIO_START_BUSY (1 << 29)
	#define MDIO_READ_FAIL (1 << 28)
	#define MDIO_RD (2 << 26)
	#define MDIO_WR (1 << 26)
	#define MDIO_PMD_SHIFT 21
	#define MDIO_PMD_MASK 0x1F
	#define MDIO_REG_SHIFT 16
	#define MDIO_REG_MASK 0x1F

	#define MDIO_CFG 0x04
	#define MDIO_C22 (1 << 0)
	#define MDIO_C45 0
	#define MDIO_CLK_DIV_SHIFT 4
	#define MDIO_CLK_DIV_MASK 0x3F
	#define MDIO_SUPP_PREAMBLE (1 << 12)

	struct unimac_mdio_priv {
	struct mii_bus *mii_bus;
	void __iomem *base;
	};

	static inline void unimac_mdio_start(struct unimac_mdio_priv *priv)
	{
	u32 reg;

	reg = __raw_readl(priv->base + MDIO_CMD);
	reg \|= MDIO_START_BUSY;
	__raw_writel(reg, priv->base + MDIO_CMD);
	}

	static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv)
	{
	return __raw_readl(priv->base + MDIO_CMD) & MDIO_START_BUSY;
	}

	static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
	{
	struct unimac_mdio_priv *priv = bus->priv;
	unsigned int timeout = 1000;
	u32 cmd;

	/* Prepare the read operation */
	cmd = MDIO_RD \| (phy_id << MDIO_PMD_SHIFT) \| (reg << MDIO_REG_SHIFT);
	__raw_writel(cmd, priv->base + MDIO_CMD);

	/* Start MDIO transaction */
	unimac_mdio_start(priv);

	do {
	if (!unimac_mdio_busy(priv))
	break;

	usleep_range(1000, 2000);
	} while (timeout--);

	if (!timeout)
	return -ETIMEDOUT;

	cmd = __raw_readl(priv->base + MDIO_CMD);

	/* Some broken devices are known not to release the line during
	* turn-around, e.g: Broadcom BCM53125 external switches, so check for
	* that condition here and ignore the MDIO controller read failure
	* indication.
	*/
	if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (cmd & MDIO_READ_FAIL))
	return -EIO;

	return cmd & 0xffff;
	}

	static int unimac_mdio_write(struct mii_bus *bus, int phy_id,
	int reg, u16 val)
	{
	struct unimac_mdio_priv *priv = bus->priv;
	unsigned int timeout = 1000;
	u32 cmd;

	/* Prepare the write operation */
	cmd = MDIO_WR \| (phy_id << MDIO_PMD_SHIFT) \|
	(reg << MDIO_REG_SHIFT) \| (0xffff & val);
	__raw_writel(cmd, priv->base + MDIO_CMD);

	unimac_mdio_start(priv);

	do {
	if (!unimac_mdio_busy(priv))
	break;

	usleep_range(1000, 2000);
	} while (timeout--);

	if (!timeout)
	return -ETIMEDOUT;

	return 0;
	}

	/* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with
	* their internal MDIO management controller making them fail to successfully
	* be read from or written to for the first transaction. We insert a dummy
	* BMSR read here to make sure that phy_get_device() and get_phy_id() can
	* correctly read the PHY MII_PHYSID1/2 registers and successfully register a
	* PHY device for this peripheral.
	*
	* Once the PHY driver is registered, we can workaround subsequent reads from
	* there (e.g: during system-wide power management).
	*
	* bus->reset is invoked before mdiobus_scan during mdiobus_register and is
	* therefore the right location to stick that workaround. Since we do not want
	* to read from non-existing PHYs, we either use bus->phy_mask or do a manual
	* Device Tree scan to limit the search area.
	*/
	static int unimac_mdio_reset(struct mii_bus *bus)
	{
	struct device_node *np = bus->dev.of_node;
	struct device_node *child;
	u32 read_mask = 0;
	int addr;

	if (!np) {
	read_mask = ~bus->phy_mask;
	} else {
	for_each_available_child_of_node(np, child) {
	addr = of_mdio_parse_addr(&bus->dev, child);
	if (addr < 0)
	continue;

	read_mask \|= 1 << addr;
	}
	}

	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
	if (read_mask & 1 << addr)
	mdiobus_read(bus, addr, MII_BMSR);
	}

	return 0;
	}

	static int unimac_mdio_probe(struct platform_device *pdev)
	{
	struct unimac_mdio_priv *priv;
	struct device_node *np;
	struct mii_bus *bus;
	struct resource *r;
	int ret;

	np = pdev->dev.of_node;

	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
	return -ENOMEM;

	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	/* Just ioremap, as this MDIO block is usually integrated into an
	* Ethernet MAC controller register range
	*/
	priv->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
	if (!priv->base) {
	dev_err(&pdev->dev, "failed to remap register\n");
	return -ENOMEM;
	}

	priv->mii_bus = mdiobus_alloc();
	if (!priv->mii_bus)
	return -ENOMEM;

	bus = priv->mii_bus;
	bus->priv = priv;
	bus->name = "unimac MII bus";
	bus->parent = &pdev->dev;
	bus->read = unimac_mdio_read;
	bus->write = unimac_mdio_write;
	bus->reset = unimac_mdio_reset;
	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);

	bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
	if (!bus->irq) {
	ret = -ENOMEM;
	goto out_mdio_free;
	}

	ret = of_mdiobus_register(bus, np);
	if (ret) {
	dev_err(&pdev->dev, "MDIO bus registration failed\n");
	goto out_mdio_irq;
	}

	platform_set_drvdata(pdev, priv);

	dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus at 0x%p\n", priv->base);

	return 0;

	out_mdio_irq:
	kfree(bus->irq);
	out_mdio_free:
	mdiobus_free(bus);
	return ret;
	}

	static int unimac_mdio_remove(struct platform_device *pdev)
	{
	struct unimac_mdio_priv *priv = platform_get_drvdata(pdev);

	mdiobus_unregister(priv->mii_bus);
	kfree(priv->mii_bus->irq);
	mdiobus_free(priv->mii_bus);

	return 0;
	}

	static const struct of_device_id unimac_mdio_ids[] = {
	{ .compatible = "brcm,genet-mdio-v4", },
	{ .compatible = "brcm,genet-mdio-v3", },
	{ .compatible = "brcm,genet-mdio-v2", },
	{ .compatible = "brcm,genet-mdio-v1", },
	{ .compatible = "brcm,unimac-mdio", },
	{ /* sentinel */ },
	};
	MODULE_DEVICE_TABLE(of, unimac_mdio_ids);

	static struct platform_driver unimac_mdio_driver = {
	.driver = {
	.name = "unimac-mdio",
	.of_match_table = unimac_mdio_ids,
	},
	.probe = unimac_mdio_probe,
	.remove = unimac_mdio_remove,
	};
	module_platform_driver(unimac_mdio_driver);

	MODULE_AUTHOR("Broadcom Corporation");
	MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller");
	MODULE_LICENSE("GPL");
	MODULE_ALIAS("platform:unimac-mdio");