| /* |
| * Panasonic MN88473 DVB-T/T2/C demodulator driver |
| * |
| * Copyright (C) 2014 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "mn88473_priv.h" |
| |
| static int mn88473_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *s) |
| { |
| s->min_delay_ms = 1000; |
| return 0; |
| } |
| |
| static int mn88473_set_frontend(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct mn88473_dev *dev = i2c_get_clientdata(client); |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i; |
| u32 if_frequency; |
| u8 delivery_system_val, if_val[3], bw_val[7]; |
| |
| dev_dbg(&client->dev, |
| "delivery_system=%u modulation=%u frequency=%u bandwidth_hz=%u symbol_rate=%u inversion=%d stream_id=%d\n", |
| c->delivery_system, |
| c->modulation, |
| c->frequency, |
| c->bandwidth_hz, |
| c->symbol_rate, |
| c->inversion, |
| c->stream_id); |
| |
| if (!dev->warm) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| switch (c->delivery_system) { |
| case SYS_DVBT: |
| delivery_system_val = 0x02; |
| break; |
| case SYS_DVBT2: |
| delivery_system_val = 0x03; |
| break; |
| case SYS_DVBC_ANNEX_A: |
| delivery_system_val = 0x04; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| switch (c->delivery_system) { |
| case SYS_DVBT: |
| case SYS_DVBT2: |
| if (c->bandwidth_hz <= 6000000) { |
| /* IF 3570000 Hz, BW 6000000 Hz */ |
| memcpy(if_val, "\x24\x8e\x8a", 3); |
| memcpy(bw_val, "\xe9\x55\x55\x1c\x29\x1c\x29", 7); |
| } else if (c->bandwidth_hz <= 7000000) { |
| /* IF 4570000 Hz, BW 7000000 Hz */ |
| memcpy(if_val, "\x2e\xcb\xfb", 3); |
| memcpy(bw_val, "\xc8\x00\x00\x17\x0a\x17\x0a", 7); |
| } else if (c->bandwidth_hz <= 8000000) { |
| /* IF 4570000 Hz, BW 8000000 Hz */ |
| memcpy(if_val, "\x2e\xcb\xfb", 3); |
| memcpy(bw_val, "\xaf\x00\x00\x11\xec\x11\xec", 7); |
| } else { |
| ret = -EINVAL; |
| goto err; |
| } |
| break; |
| case SYS_DVBC_ANNEX_A: |
| /* IF 5070000 Hz, BW 8000000 Hz */ |
| memcpy(if_val, "\x33\xea\xb3", 3); |
| memcpy(bw_val, "\xaf\x00\x00\x11\xec\x11\xec", 7); |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) { |
| ret = fe->ops.tuner_ops.set_params(fe); |
| if (ret) |
| goto err; |
| } |
| |
| if (fe->ops.tuner_ops.get_if_frequency) { |
| ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&client->dev, "get_if_frequency=%d\n", if_frequency); |
| } else { |
| if_frequency = 0; |
| } |
| |
| switch (if_frequency) { |
| case 3570000: |
| case 4570000: |
| case 5070000: |
| break; |
| default: |
| dev_err(&client->dev, "IF frequency %d not supported\n", |
| if_frequency); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = regmap_write(dev->regmap[2], 0x05, 0x00); |
| ret = regmap_write(dev->regmap[2], 0xfb, 0x13); |
| ret = regmap_write(dev->regmap[2], 0xef, 0x13); |
| ret = regmap_write(dev->regmap[2], 0xf9, 0x13); |
| ret = regmap_write(dev->regmap[2], 0x00, 0x18); |
| ret = regmap_write(dev->regmap[2], 0x01, 0x01); |
| ret = regmap_write(dev->regmap[2], 0x02, 0x21); |
| ret = regmap_write(dev->regmap[2], 0x03, delivery_system_val); |
| ret = regmap_write(dev->regmap[2], 0x0b, 0x00); |
| |
| for (i = 0; i < sizeof(if_val); i++) { |
| ret = regmap_write(dev->regmap[2], 0x10 + i, if_val[i]); |
| if (ret) |
| goto err; |
| } |
| |
| for (i = 0; i < sizeof(bw_val); i++) { |
| ret = regmap_write(dev->regmap[2], 0x13 + i, bw_val[i]); |
| if (ret) |
| goto err; |
| } |
| |
| ret = regmap_write(dev->regmap[2], 0x2d, 0x3b); |
| ret = regmap_write(dev->regmap[2], 0x2e, 0x00); |
| ret = regmap_write(dev->regmap[2], 0x56, 0x0d); |
| ret = regmap_write(dev->regmap[0], 0x01, 0xba); |
| ret = regmap_write(dev->regmap[0], 0x02, 0x13); |
| ret = regmap_write(dev->regmap[0], 0x03, 0x80); |
| ret = regmap_write(dev->regmap[0], 0x04, 0xba); |
| ret = regmap_write(dev->regmap[0], 0x05, 0x91); |
| ret = regmap_write(dev->regmap[0], 0x07, 0xe7); |
| ret = regmap_write(dev->regmap[0], 0x08, 0x28); |
| ret = regmap_write(dev->regmap[0], 0x0a, 0x1a); |
| ret = regmap_write(dev->regmap[0], 0x13, 0x1f); |
| ret = regmap_write(dev->regmap[0], 0x19, 0x03); |
| ret = regmap_write(dev->regmap[0], 0x1d, 0xb0); |
| ret = regmap_write(dev->regmap[0], 0x2a, 0x72); |
| ret = regmap_write(dev->regmap[0], 0x2d, 0x00); |
| ret = regmap_write(dev->regmap[0], 0x3c, 0x00); |
| ret = regmap_write(dev->regmap[0], 0x3f, 0xf8); |
| ret = regmap_write(dev->regmap[0], 0x40, 0xf4); |
| ret = regmap_write(dev->regmap[0], 0x41, 0x08); |
| ret = regmap_write(dev->regmap[0], 0xd2, 0x29); |
| ret = regmap_write(dev->regmap[0], 0xd4, 0x55); |
| ret = regmap_write(dev->regmap[1], 0x10, 0x10); |
| ret = regmap_write(dev->regmap[1], 0x11, 0xab); |
| ret = regmap_write(dev->regmap[1], 0x12, 0x0d); |
| ret = regmap_write(dev->regmap[1], 0x13, 0xae); |
| ret = regmap_write(dev->regmap[1], 0x14, 0x1d); |
| ret = regmap_write(dev->regmap[1], 0x15, 0x9d); |
| ret = regmap_write(dev->regmap[1], 0xbe, 0x08); |
| ret = regmap_write(dev->regmap[2], 0x09, 0x08); |
| ret = regmap_write(dev->regmap[2], 0x08, 0x1d); |
| ret = regmap_write(dev->regmap[0], 0xb2, 0x37); |
| ret = regmap_write(dev->regmap[0], 0xd7, 0x04); |
| ret = regmap_write(dev->regmap[2], 0x32, 0x80); |
| ret = regmap_write(dev->regmap[2], 0x36, 0x00); |
| ret = regmap_write(dev->regmap[2], 0xf8, 0x9f); |
| if (ret) |
| goto err; |
| |
| dev->delivery_system = c->delivery_system; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int mn88473_read_status(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct mn88473_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| |
| *status = 0; |
| |
| if (!dev->warm) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | |
| FE_HAS_SYNC | FE_HAS_LOCK; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int mn88473_init(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct mn88473_dev *dev = i2c_get_clientdata(client); |
| int ret, len, remaining; |
| const struct firmware *fw = NULL; |
| u8 *fw_file = MN88473_FIRMWARE; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| if (dev->warm) |
| return 0; |
| |
| /* request the firmware, this will block and timeout */ |
| ret = request_firmware(&fw, fw_file, &client->dev); |
| if (ret) { |
| dev_err(&client->dev, "firmare file '%s' not found\n", fw_file); |
| goto err_request_firmware; |
| } |
| |
| dev_info(&client->dev, "downloading firmware from file '%s'\n", |
| fw_file); |
| |
| ret = regmap_write(dev->regmap[0], 0xf5, 0x03); |
| if (ret) |
| goto err; |
| |
| for (remaining = fw->size; remaining > 0; |
| remaining -= (dev->i2c_wr_max - 1)) { |
| len = remaining; |
| if (len > (dev->i2c_wr_max - 1)) |
| len = (dev->i2c_wr_max - 1); |
| |
| ret = regmap_bulk_write(dev->regmap[0], 0xf6, |
| &fw->data[fw->size - remaining], len); |
| if (ret) { |
| dev_err(&client->dev, "firmware download failed=%d\n", |
| ret); |
| goto err; |
| } |
| } |
| |
| ret = regmap_write(dev->regmap[0], 0xf5, 0x00); |
| if (ret) |
| goto err; |
| |
| release_firmware(fw); |
| fw = NULL; |
| |
| /* warm state */ |
| dev->warm = true; |
| |
| return 0; |
| |
| err: |
| release_firmware(fw); |
| err_request_firmware: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int mn88473_sleep(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct mn88473_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| ret = regmap_write(dev->regmap[2], 0x05, 0x3e); |
| if (ret) |
| goto err; |
| |
| dev->delivery_system = SYS_UNDEFINED; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static struct dvb_frontend_ops mn88473_ops = { |
| .delsys = {SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_AC}, |
| .info = { |
| .name = "Panasonic MN88473", |
| .caps = FE_CAN_FEC_1_2 | |
| FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | |
| FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_QAM_16 | |
| FE_CAN_QAM_32 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_128 | |
| FE_CAN_QAM_256 | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_MUTE_TS | |
| FE_CAN_2G_MODULATION | |
| FE_CAN_MULTISTREAM |
| }, |
| |
| .get_tune_settings = mn88473_get_tune_settings, |
| |
| .init = mn88473_init, |
| .sleep = mn88473_sleep, |
| |
| .set_frontend = mn88473_set_frontend, |
| |
| .read_status = mn88473_read_status, |
| }; |
| |
| static int mn88473_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct mn88473_config *config = client->dev.platform_data; |
| struct mn88473_dev *dev; |
| int ret; |
| unsigned int utmp; |
| static const struct regmap_config regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| }; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* Caller really need to provide pointer for frontend we create. */ |
| if (config->fe == NULL) { |
| dev_err(&client->dev, "frontend pointer not defined\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (dev == NULL) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| dev->i2c_wr_max = config->i2c_wr_max; |
| dev->client[0] = client; |
| dev->regmap[0] = regmap_init_i2c(dev->client[0], ®map_config); |
| if (IS_ERR(dev->regmap[0])) { |
| ret = PTR_ERR(dev->regmap[0]); |
| goto err_kfree; |
| } |
| |
| /* check demod answers to I2C */ |
| ret = regmap_read(dev->regmap[0], 0x00, &utmp); |
| if (ret) |
| goto err_regmap_0_regmap_exit; |
| |
| /* |
| * Chip has three I2C addresses for different register pages. Used |
| * addresses are 0x18, 0x1a and 0x1c. We register two dummy clients, |
| * 0x1a and 0x1c, in order to get own I2C client for each register page. |
| */ |
| dev->client[1] = i2c_new_dummy(client->adapter, 0x1a); |
| if (dev->client[1] == NULL) { |
| ret = -ENODEV; |
| dev_err(&client->dev, "I2C registration failed\n"); |
| if (ret) |
| goto err_regmap_0_regmap_exit; |
| } |
| dev->regmap[1] = regmap_init_i2c(dev->client[1], ®map_config); |
| if (IS_ERR(dev->regmap[1])) { |
| ret = PTR_ERR(dev->regmap[1]); |
| goto err_client_1_i2c_unregister_device; |
| } |
| i2c_set_clientdata(dev->client[1], dev); |
| |
| dev->client[2] = i2c_new_dummy(client->adapter, 0x1c); |
| if (dev->client[2] == NULL) { |
| ret = -ENODEV; |
| dev_err(&client->dev, "2nd I2C registration failed\n"); |
| if (ret) |
| goto err_regmap_1_regmap_exit; |
| } |
| dev->regmap[2] = regmap_init_i2c(dev->client[2], ®map_config); |
| if (IS_ERR(dev->regmap[2])) { |
| ret = PTR_ERR(dev->regmap[2]); |
| goto err_client_2_i2c_unregister_device; |
| } |
| i2c_set_clientdata(dev->client[2], dev); |
| |
| /* create dvb_frontend */ |
| memcpy(&dev->fe.ops, &mn88473_ops, sizeof(struct dvb_frontend_ops)); |
| dev->fe.demodulator_priv = client; |
| *config->fe = &dev->fe; |
| i2c_set_clientdata(client, dev); |
| |
| dev_info(&dev->client[0]->dev, "Panasonic MN88473 successfully attached\n"); |
| return 0; |
| |
| err_client_2_i2c_unregister_device: |
| i2c_unregister_device(dev->client[2]); |
| err_regmap_1_regmap_exit: |
| regmap_exit(dev->regmap[1]); |
| err_client_1_i2c_unregister_device: |
| i2c_unregister_device(dev->client[1]); |
| err_regmap_0_regmap_exit: |
| regmap_exit(dev->regmap[0]); |
| err_kfree: |
| kfree(dev); |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int mn88473_remove(struct i2c_client *client) |
| { |
| struct mn88473_dev *dev = i2c_get_clientdata(client); |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| regmap_exit(dev->regmap[2]); |
| i2c_unregister_device(dev->client[2]); |
| |
| regmap_exit(dev->regmap[1]); |
| i2c_unregister_device(dev->client[1]); |
| |
| regmap_exit(dev->regmap[0]); |
| |
| kfree(dev); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id mn88473_id_table[] = { |
| {"mn88473", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, mn88473_id_table); |
| |
| static struct i2c_driver mn88473_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "mn88473", |
| }, |
| .probe = mn88473_probe, |
| .remove = mn88473_remove, |
| .id_table = mn88473_id_table, |
| }; |
| |
| module_i2c_driver(mn88473_driver); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Panasonic MN88473 DVB-T/T2/C demodulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(MN88473_FIRMWARE); |