| /* drivers/rtc/rtc-max6902.c |
| * |
| * Copyright (C) 2006 8D Technologies inc. |
| * Copyright (C) 2004 Compulab Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Driver for MAX6902 spi RTC |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/init.h> |
| #include <linux/rtc.h> |
| #include <linux/spi/spi.h> |
| #include <linux/bcd.h> |
| |
| #define MAX6902_REG_SECONDS 0x01 |
| #define MAX6902_REG_MINUTES 0x03 |
| #define MAX6902_REG_HOURS 0x05 |
| #define MAX6902_REG_DATE 0x07 |
| #define MAX6902_REG_MONTH 0x09 |
| #define MAX6902_REG_DAY 0x0B |
| #define MAX6902_REG_YEAR 0x0D |
| #define MAX6902_REG_CONTROL 0x0F |
| #define MAX6902_REG_CENTURY 0x13 |
| |
| static int max6902_set_reg(struct device *dev, unsigned char address, |
| unsigned char data) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| unsigned char buf[2]; |
| |
| /* MSB must be '0' to write */ |
| buf[0] = address & 0x7f; |
| buf[1] = data; |
| |
| return spi_write_then_read(spi, buf, 2, NULL, 0); |
| } |
| |
| static int max6902_get_reg(struct device *dev, unsigned char address, |
| unsigned char *data) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| |
| /* Set MSB to indicate read */ |
| *data = address | 0x80; |
| |
| return spi_write_then_read(spi, data, 1, data, 1); |
| } |
| |
| static int max6902_read_time(struct device *dev, struct rtc_time *dt) |
| { |
| int err, century; |
| struct spi_device *spi = to_spi_device(dev); |
| unsigned char buf[8]; |
| |
| buf[0] = 0xbf; /* Burst read */ |
| |
| err = spi_write_then_read(spi, buf, 1, buf, 8); |
| if (err != 0) |
| return err; |
| |
| /* The chip sends data in this order: |
| * Seconds, Minutes, Hours, Date, Month, Day, Year */ |
| dt->tm_sec = bcd2bin(buf[0]); |
| dt->tm_min = bcd2bin(buf[1]); |
| dt->tm_hour = bcd2bin(buf[2]); |
| dt->tm_mday = bcd2bin(buf[3]); |
| dt->tm_mon = bcd2bin(buf[4]) - 1; |
| dt->tm_wday = bcd2bin(buf[5]); |
| dt->tm_year = bcd2bin(buf[6]); |
| |
| /* Read century */ |
| err = max6902_get_reg(dev, MAX6902_REG_CENTURY, &buf[0]); |
| if (err != 0) |
| return err; |
| |
| century = bcd2bin(buf[0]) * 100; |
| |
| dt->tm_year += century; |
| dt->tm_year -= 1900; |
| |
| return rtc_valid_tm(dt); |
| } |
| |
| static int max6902_set_time(struct device *dev, struct rtc_time *dt) |
| { |
| dt->tm_year = dt->tm_year + 1900; |
| |
| /* Remove write protection */ |
| max6902_set_reg(dev, 0xF, 0); |
| |
| max6902_set_reg(dev, 0x01, bin2bcd(dt->tm_sec)); |
| max6902_set_reg(dev, 0x03, bin2bcd(dt->tm_min)); |
| max6902_set_reg(dev, 0x05, bin2bcd(dt->tm_hour)); |
| |
| max6902_set_reg(dev, 0x07, bin2bcd(dt->tm_mday)); |
| max6902_set_reg(dev, 0x09, bin2bcd(dt->tm_mon + 1)); |
| max6902_set_reg(dev, 0x0B, bin2bcd(dt->tm_wday)); |
| max6902_set_reg(dev, 0x0D, bin2bcd(dt->tm_year % 100)); |
| max6902_set_reg(dev, 0x13, bin2bcd(dt->tm_year / 100)); |
| |
| /* Compulab used a delay here. However, the datasheet |
| * does not mention a delay being required anywhere... */ |
| /* delay(2000); */ |
| |
| /* Write protect */ |
| max6902_set_reg(dev, 0xF, 0x80); |
| |
| return 0; |
| } |
| |
| static const struct rtc_class_ops max6902_rtc_ops = { |
| .read_time = max6902_read_time, |
| .set_time = max6902_set_time, |
| }; |
| |
| static int __devinit max6902_probe(struct spi_device *spi) |
| { |
| struct rtc_device *rtc; |
| unsigned char tmp; |
| int res; |
| |
| spi->mode = SPI_MODE_3; |
| spi->bits_per_word = 8; |
| spi_setup(spi); |
| |
| res = max6902_get_reg(&spi->dev, MAX6902_REG_SECONDS, &tmp); |
| if (res != 0) |
| return res; |
| |
| rtc = rtc_device_register("max6902", |
| &spi->dev, &max6902_rtc_ops, THIS_MODULE); |
| if (IS_ERR(rtc)) |
| return PTR_ERR(rtc); |
| |
| return 0; |
| } |
| |
| static int __devexit max6902_remove(struct spi_device *spi) |
| { |
| struct rtc_device *rtc = platform_get_drvdata(spi); |
| |
| rtc_device_unregister(rtc); |
| return 0; |
| } |
| |
| static struct spi_driver max6902_driver = { |
| .driver = { |
| .name = "rtc-max6902", |
| .bus = &spi_bus_type, |
| .owner = THIS_MODULE, |
| }, |
| .probe = max6902_probe, |
| .remove = __devexit_p(max6902_remove), |
| }; |
| |
| static __init int max6902_init(void) |
| { |
| return spi_register_driver(&max6902_driver); |
| } |
| module_init(max6902_init); |
| |
| static __exit void max6902_exit(void) |
| { |
| spi_unregister_driver(&max6902_driver); |
| } |
| module_exit(max6902_exit); |
| |
| MODULE_DESCRIPTION ("max6902 spi RTC driver"); |
| MODULE_AUTHOR ("Raphael Assenat"); |
| MODULE_LICENSE ("GPL"); |