drivers/acpi/executer/exregion.c - kernel/msm-4.9 - Gitiles


 /******************************************************************************
  *
  * Module Name: exregion - ACPI default op_region (address space) handlers
  *
  *****************************************************************************/

 /*
  * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions, and the following disclaimer,
  *    without modification.
  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  *    substantially similar to the "NO WARRANTY" disclaimer below
  *    ("Disclaimer") and any redistribution must be conditioned upon
  *    including a substantially similar Disclaimer requirement for further
  *    binary redistribution.
  * 3. Neither the names of the above-listed copyright holders nor the names
  *    of any contributors may be used to endorse or promote products derived
  *    from this software without specific prior written permission.
  *
  * Alternatively, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") version 2 as published by the Free
  * Software Foundation.
  *
  * NO WARRANTY
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  */

 #include <acpi/acpi.h>
 #include <acpi/acinterp.h>

 #define _COMPONENT          ACPI_EXECUTER
 ACPI_MODULE_NAME("exregion")

 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_system_memory_space_handler
  *
  * PARAMETERS:  Function            - Read or Write operation
  *              Address             - Where in the space to read or write
  *              bit_width           - Field width in bits (8, 16, or 32)
  *              Value               - Pointer to in or out value
  *              handler_context     - Pointer to Handler's context
  *              region_context      - Pointer to context specific to the
  *                                    accessed region
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Handler for the System Memory address space (Op Region)
  *
  ******************************************************************************/
 acpi_status
 acpi_ex_system_memory_space_handler(u32 function,
 				    acpi_physical_address address,
 				    u32 bit_width,
 				    acpi_integer * value,
 				    void *handler_context, void *region_context)
 {
 	acpi_status status = AE_OK;
 	void *logical_addr_ptr = NULL;
 	struct acpi_mem_space_context *mem_info = region_context;
 	u32 length;
 	acpi_size window_size;
 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
 	u32 remainder;
 #endif

 	ACPI_FUNCTION_TRACE(ex_system_memory_space_handler);

 	/* Validate and translate the bit width */

 	switch (bit_width) {
 	case 8:
 		length = 1;
 		break;

 	case 16:
 		length = 2;
 		break;

 	case 32:
 		length = 4;
 		break;

 	case 64:
 		length = 8;
 		break;

 	default:
 		ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %d",
 			    bit_width));
 		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
 	}

 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
 	/*
 	 * Hardware does not support non-aligned data transfers, we must verify
 	 * the request.
 	 */
 	(void)acpi_ut_short_divide((acpi_integer) address, length, NULL,
 				   &remainder);
 	if (remainder != 0) {
 		return_ACPI_STATUS(AE_AML_ALIGNMENT);
 	}
 #endif

 	/*
 	 * Does the request fit into the cached memory mapping?
 	 * Is 1) Address below the current mapping? OR
 	 *    2) Address beyond the current mapping?
 	 */
 	if ((address < mem_info->mapped_physical_address) ||
 	    (((acpi_integer) address + length) > ((acpi_integer)
 						  mem_info->
 						  mapped_physical_address +
 						  mem_info->mapped_length))) {
 		/*
 		 * The request cannot be resolved by the current memory mapping;
 		 * Delete the existing mapping and create a new one.
 		 */
 		if (mem_info->mapped_length) {

 			/* Valid mapping, delete it */

 			acpi_os_unmap_memory(mem_info->mapped_logical_address,
 					     mem_info->mapped_length);
 		}

 		/*
 		 * Don't attempt to map memory beyond the end of the region, and
 		 * constrain the maximum mapping size to something reasonable.
 		 */
 		window_size = (acpi_size)
 		    ((mem_info->address + mem_info->length) - address);

 		if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) {
 			window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE;
 		}

 		/* Create a new mapping starting at the address given */

 		mem_info->mapped_logical_address =
 		    acpi_os_map_memory((acpi_native_uint) address, window_size);
 		if (!mem_info->mapped_logical_address) {
 			ACPI_ERROR((AE_INFO,
 				    "Could not map memory at %8.8X%8.8X, size %X",
 				    ACPI_FORMAT_UINT64(address),
 				    (u32) window_size));
 			mem_info->mapped_length = 0;
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}

 		/* Save the physical address and mapping size */

 		mem_info->mapped_physical_address = address;
 		mem_info->mapped_length = window_size;
 	}

 	/*
 	 * Generate a logical pointer corresponding to the address we want to
 	 * access
 	 */
 	logical_addr_ptr = mem_info->mapped_logical_address +
 	    ((acpi_integer) address -
 	     (acpi_integer) mem_info->mapped_physical_address);

 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "System-Memory (width %d) R/W %d Address=%8.8X%8.8X\n",
 			  bit_width, function, ACPI_FORMAT_UINT64(address)));

 	/*
 	 * Perform the memory read or write
 	 *
 	 * Note: For machines that do not support non-aligned transfers, the target
 	 * address was checked for alignment above.  We do not attempt to break the
 	 * transfer up into smaller (byte-size) chunks because the AML specifically
 	 * asked for a transfer width that the hardware may require.
 	 */
 	switch (function) {
 	case ACPI_READ:

 		*value = 0;
 		switch (bit_width) {
 		case 8:
 			*value = (acpi_integer) ACPI_GET8(logical_addr_ptr);
 			break;

 		case 16:
 			*value = (acpi_integer) ACPI_GET16(logical_addr_ptr);
 			break;

 		case 32:
 			*value = (acpi_integer) ACPI_GET32(logical_addr_ptr);
 			break;

 		case 64:
 			*value = (acpi_integer) ACPI_GET64(logical_addr_ptr);
 			break;

 		default:
 			/* bit_width was already validated */
 			break;
 		}
 		break;

 	case ACPI_WRITE:

 		switch (bit_width) {
 		case 8:
 			ACPI_SET8(logical_addr_ptr) = (u8) * value;
 			break;

 		case 16:
 			ACPI_SET16(logical_addr_ptr) = (u16) * value;
 			break;

 		case 32:
 			ACPI_SET32(logical_addr_ptr) = (u32) * value;
 			break;

 		case 64:
 			ACPI_SET64(logical_addr_ptr) = (u64) * value;
 			break;

 		default:
 			/* bit_width was already validated */
 			break;
 		}
 		break;

 	default:
 		status = AE_BAD_PARAMETER;
 		break;
 	}

 	return_ACPI_STATUS(status);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_system_io_space_handler
  *
  * PARAMETERS:  Function            - Read or Write operation
  *              Address             - Where in the space to read or write
  *              bit_width           - Field width in bits (8, 16, or 32)
  *              Value               - Pointer to in or out value
  *              handler_context     - Pointer to Handler's context
  *              region_context      - Pointer to context specific to the
  *                                    accessed region
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Handler for the System IO address space (Op Region)
  *
  ******************************************************************************/

 acpi_status
 acpi_ex_system_io_space_handler(u32 function,
 				acpi_physical_address address,
 				u32 bit_width,
 				acpi_integer * value,
 				void *handler_context, void *region_context)
 {
 	acpi_status status = AE_OK;
 	u32 value32;

 	ACPI_FUNCTION_TRACE(ex_system_io_space_handler);

 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "System-IO (width %d) R/W %d Address=%8.8X%8.8X\n",
 			  bit_width, function, ACPI_FORMAT_UINT64(address)));

 	/* Decode the function parameter */

 	switch (function) {
 	case ACPI_READ:

 		status = acpi_os_read_port((acpi_io_address) address,
 					   &value32, bit_width);
 		*value = value32;
 		break;

 	case ACPI_WRITE:

 		status = acpi_os_write_port((acpi_io_address) address,
 					    (u32) * value, bit_width);
 		break;

 	default:
 		status = AE_BAD_PARAMETER;
 		break;
 	}

 	return_ACPI_STATUS(status);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_pci_config_space_handler
  *
  * PARAMETERS:  Function            - Read or Write operation
  *              Address             - Where in the space to read or write
  *              bit_width           - Field width in bits (8, 16, or 32)
  *              Value               - Pointer to in or out value
  *              handler_context     - Pointer to Handler's context
  *              region_context      - Pointer to context specific to the
  *                                    accessed region
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Handler for the PCI Config address space (Op Region)
  *
  ******************************************************************************/

 acpi_status
 acpi_ex_pci_config_space_handler(u32 function,
 				 acpi_physical_address address,
 				 u32 bit_width,
 				 acpi_integer * value,
 				 void *handler_context, void *region_context)
 {
 	acpi_status status = AE_OK;
 	struct acpi_pci_id *pci_id;
 	u16 pci_register;

 	ACPI_FUNCTION_TRACE(ex_pci_config_space_handler);

 	/*
 	 *  The arguments to acpi_os(Read|Write)pci_configuration are:
 	 *
 	 *  pci_segment is the PCI bus segment range 0-31
 	 *  pci_bus     is the PCI bus number range 0-255
 	 *  pci_device  is the PCI device number range 0-31
 	 *  pci_function is the PCI device function number
 	 *  pci_register is the Config space register range 0-255 bytes
 	 *
 	 *  Value - input value for write, output address for read
 	 *
 	 */
 	pci_id = (struct acpi_pci_id *)region_context;
 	pci_register = (u16) (u32) address;

 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "Pci-Config %d (%d) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n",
 			  function, bit_width, pci_id->segment, pci_id->bus,
 			  pci_id->device, pci_id->function, pci_register));

 	switch (function) {
 	case ACPI_READ:

 		*value = 0;
 		status = acpi_os_read_pci_configuration(pci_id, pci_register,
 							value, bit_width);
 		break;

 	case ACPI_WRITE:

 		status = acpi_os_write_pci_configuration(pci_id, pci_register,
 							 *value, bit_width);
 		break;

 	default:

 		status = AE_BAD_PARAMETER;
 		break;
 	}

 	return_ACPI_STATUS(status);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_cmos_space_handler
  *
  * PARAMETERS:  Function            - Read or Write operation
  *              Address             - Where in the space to read or write
  *              bit_width           - Field width in bits (8, 16, or 32)
  *              Value               - Pointer to in or out value
  *              handler_context     - Pointer to Handler's context
  *              region_context      - Pointer to context specific to the
  *                                    accessed region
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Handler for the CMOS address space (Op Region)
  *
  ******************************************************************************/

 acpi_status
 acpi_ex_cmos_space_handler(u32 function,
 			   acpi_physical_address address,
 			   u32 bit_width,
 			   acpi_integer * value,
 			   void *handler_context, void *region_context)
 {
 	acpi_status status = AE_OK;

 	ACPI_FUNCTION_TRACE(ex_cmos_space_handler);

 	return_ACPI_STATUS(status);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_pci_bar_space_handler
  *
  * PARAMETERS:  Function            - Read or Write operation
  *              Address             - Where in the space to read or write
  *              bit_width           - Field width in bits (8, 16, or 32)
  *              Value               - Pointer to in or out value
  *              handler_context     - Pointer to Handler's context
  *              region_context      - Pointer to context specific to the
  *                                    accessed region
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Handler for the PCI bar_target address space (Op Region)
  *
  ******************************************************************************/

 acpi_status
 acpi_ex_pci_bar_space_handler(u32 function,
 			      acpi_physical_address address,
 			      u32 bit_width,
 			      acpi_integer * value,
 			      void *handler_context, void *region_context)
 {
 	acpi_status status = AE_OK;

 	ACPI_FUNCTION_TRACE(ex_pci_bar_space_handler);

 	return_ACPI_STATUS(status);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_data_table_space_handler
  *
  * PARAMETERS:  Function            - Read or Write operation
  *              Address             - Where in the space to read or write
  *              bit_width           - Field width in bits (8, 16, or 32)
  *              Value               - Pointer to in or out value
  *              handler_context     - Pointer to Handler's context
  *              region_context      - Pointer to context specific to the
  *                                    accessed region
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Handler for the Data Table address space (Op Region)
  *
  ******************************************************************************/

 acpi_status
 acpi_ex_data_table_space_handler(u32 function,
 				 acpi_physical_address address,
 				 u32 bit_width,
 				 acpi_integer * value,
 				 void *handler_context, void *region_context)
 {
 	ACPI_FUNCTION_TRACE(ex_data_table_space_handler);

 	/* Perform the memory read or write */

 	switch (function) {
 	case ACPI_READ:

 		ACPI_MEMCPY(ACPI_CAST_PTR(char, value),
 			    ACPI_PHYSADDR_TO_PTR(address),
 			    ACPI_DIV_8(bit_width));
 		break;

 	case ACPI_WRITE:
 	default:

 		return_ACPI_STATUS(AE_SUPPORT);
 	}

 	return_ACPI_STATUS(AE_OK);
 }

	/******************************************************************************
	*
	* Module Name: exregion - ACPI default op_region (address space) handlers
	*
	*****************************************************************************/

	/*
	* Copyright (C) 2000 - 2007, R. Byron Moore
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions, and the following disclaimer,
	* without modification.
	* 2. Redistributions in binary form must reproduce at minimum a disclaimer
	* substantially similar to the "NO WARRANTY" disclaimer below
	* ("Disclaimer") and any redistribution must be conditioned upon
	* including a substantially similar Disclaimer requirement for further
	* binary redistribution.
	* 3. Neither the names of the above-listed copyright holders nor the names
	* of any contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* Alternatively, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") version 2 as published by the Free
	* Software Foundation.
	*
	* NO WARRANTY
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
	* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
	* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGES.
	*/

	#include <acpi/acpi.h>
	#include <acpi/acinterp.h>

	#define _COMPONENT ACPI_EXECUTER
	ACPI_MODULE_NAME("exregion")

	/*******************************************************************************
	*
	* FUNCTION: acpi_ex_system_memory_space_handler
	*
	* PARAMETERS: Function - Read or Write operation
	* Address - Where in the space to read or write
	* bit_width - Field width in bits (8, 16, or 32)
	* Value - Pointer to in or out value
	* handler_context - Pointer to Handler's context
	* region_context - Pointer to context specific to the
	* accessed region
	*
	* RETURN: Status
	*
	* DESCRIPTION: Handler for the System Memory address space (Op Region)
	*
	******************************************************************************/
	acpi_status
	acpi_ex_system_memory_space_handler(u32 function,
	acpi_physical_address address,
	u32 bit_width,
	acpi_integer * value,
	void handler_context, void region_context)
	{
	acpi_status status = AE_OK;
	void *logical_addr_ptr = NULL;
	struct acpi_mem_space_context *mem_info = region_context;
	u32 length;
	acpi_size window_size;
	#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
	u32 remainder;
	#endif

	ACPI_FUNCTION_TRACE(ex_system_memory_space_handler);

	/* Validate and translate the bit width */

	switch (bit_width) {
	case 8:
	length = 1;
	break;

	case 16:
	length = 2;
	break;

	case 32:
	length = 4;
	break;

	case 64:
	length = 8;
	break;

	default:
	ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %d",
	bit_width));
	return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
	}

	#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
	/*
	* Hardware does not support non-aligned data transfers, we must verify
	* the request.
	*/
	(void)acpi_ut_short_divide((acpi_integer) address, length, NULL,
	&remainder);
	if (remainder != 0) {
	return_ACPI_STATUS(AE_AML_ALIGNMENT);
	}
	#endif

	/*
	* Does the request fit into the cached memory mapping?
	* Is 1) Address below the current mapping? OR
	* 2) Address beyond the current mapping?
	*/
	if ((address < mem_info->mapped_physical_address) \|\|
	(((acpi_integer) address + length) > ((acpi_integer)
	mem_info->
	mapped_physical_address +
	mem_info->mapped_length))) {
	/*
	* The request cannot be resolved by the current memory mapping;
	* Delete the existing mapping and create a new one.
	*/
	if (mem_info->mapped_length) {

	/* Valid mapping, delete it */

	acpi_os_unmap_memory(mem_info->mapped_logical_address,
	mem_info->mapped_length);
	}

	/*
	* Don't attempt to map memory beyond the end of the region, and
	* constrain the maximum mapping size to something reasonable.
	*/
	window_size = (acpi_size)
	((mem_info->address + mem_info->length) - address);

	if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) {
	window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE;
	}

	/* Create a new mapping starting at the address given */

	mem_info->mapped_logical_address =
	acpi_os_map_memory((acpi_native_uint) address, window_size);
	if (!mem_info->mapped_logical_address) {
	ACPI_ERROR((AE_INFO,
	"Could not map memory at %8.8X%8.8X, size %X",
	ACPI_FORMAT_UINT64(address),
	(u32) window_size));
	mem_info->mapped_length = 0;
	return_ACPI_STATUS(AE_NO_MEMORY);
	}

	/* Save the physical address and mapping size */

	mem_info->mapped_physical_address = address;
	mem_info->mapped_length = window_size;
	}

	/*
	* Generate a logical pointer corresponding to the address we want to
	* access
	*/
	logical_addr_ptr = mem_info->mapped_logical_address +
	((acpi_integer) address -
	(acpi_integer) mem_info->mapped_physical_address);

	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
	"System-Memory (width %d) R/W %d Address=%8.8X%8.8X\n",
	bit_width, function, ACPI_FORMAT_UINT64(address)));

	/*
	* Perform the memory read or write
	*
	* Note: For machines that do not support non-aligned transfers, the target
	* address was checked for alignment above. We do not attempt to break the
	* transfer up into smaller (byte-size) chunks because the AML specifically
	* asked for a transfer width that the hardware may require.
	*/
	switch (function) {
	case ACPI_READ:

	*value = 0;
	switch (bit_width) {
	case 8:
	*value = (acpi_integer) ACPI_GET8(logical_addr_ptr);
	break;

	case 16:
	*value = (acpi_integer) ACPI_GET16(logical_addr_ptr);
	break;

	case 32:
	*value = (acpi_integer) ACPI_GET32(logical_addr_ptr);
	break;

	case 64:
	*value = (acpi_integer) ACPI_GET64(logical_addr_ptr);
	break;

	default:
	/* bit_width was already validated */
	break;
	}
	break;

	case ACPI_WRITE:

	switch (bit_width) {
	case 8:
	ACPI_SET8(logical_addr_ptr) = (u8) * value;
	break;

	case 16:
	ACPI_SET16(logical_addr_ptr) = (u16) * value;
	break;

	case 32:
	ACPI_SET32(logical_addr_ptr) = (u32) * value;
	break;

	case 64:
	ACPI_SET64(logical_addr_ptr) = (u64) * value;
	break;

	default:
	/* bit_width was already validated */
	break;
	}
	break;

	default:
	status = AE_BAD_PARAMETER;
	break;
	}

	return_ACPI_STATUS(status);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_ex_system_io_space_handler
	*
	* PARAMETERS: Function - Read or Write operation
	* Address - Where in the space to read or write
	* bit_width - Field width in bits (8, 16, or 32)
	* Value - Pointer to in or out value
	* handler_context - Pointer to Handler's context
	* region_context - Pointer to context specific to the
	* accessed region
	*
	* RETURN: Status
	*
	* DESCRIPTION: Handler for the System IO address space (Op Region)
	*
	******************************************************************************/

	acpi_status
	acpi_ex_system_io_space_handler(u32 function,
	acpi_physical_address address,
	u32 bit_width,
	acpi_integer * value,
	void handler_context, void region_context)
	{
	acpi_status status = AE_OK;
	u32 value32;

	ACPI_FUNCTION_TRACE(ex_system_io_space_handler);

	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
	"System-IO (width %d) R/W %d Address=%8.8X%8.8X\n",
	bit_width, function, ACPI_FORMAT_UINT64(address)));

	/* Decode the function parameter */

	switch (function) {
	case ACPI_READ:

	status = acpi_os_read_port((acpi_io_address) address,
	&value32, bit_width);
	*value = value32;
	break;

	case ACPI_WRITE:

	status = acpi_os_write_port((acpi_io_address) address,
	(u32) * value, bit_width);
	break;

	default:
	status = AE_BAD_PARAMETER;
	break;
	}

	return_ACPI_STATUS(status);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_ex_pci_config_space_handler
	*
	* PARAMETERS: Function - Read or Write operation
	* Address - Where in the space to read or write
	* bit_width - Field width in bits (8, 16, or 32)
	* Value - Pointer to in or out value
	* handler_context - Pointer to Handler's context
	* region_context - Pointer to context specific to the
	* accessed region
	*
	* RETURN: Status
	*
	* DESCRIPTION: Handler for the PCI Config address space (Op Region)
	*
	******************************************************************************/

	acpi_status
	acpi_ex_pci_config_space_handler(u32 function,
	acpi_physical_address address,
	u32 bit_width,
	acpi_integer * value,
	void handler_context, void region_context)
	{
	acpi_status status = AE_OK;
	struct acpi_pci_id *pci_id;
	u16 pci_register;

	ACPI_FUNCTION_TRACE(ex_pci_config_space_handler);

	/*
	* The arguments to acpi_os(Read\|Write)pci_configuration are:
	*
	* pci_segment is the PCI bus segment range 0-31
	* pci_bus is the PCI bus number range 0-255
	* pci_device is the PCI device number range 0-31
	* pci_function is the PCI device function number
	* pci_register is the Config space register range 0-255 bytes
	*
	* Value - input value for write, output address for read
	*
	*/
	pci_id = (struct acpi_pci_id *)region_context;
	pci_register = (u16) (u32) address;

	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
	"Pci-Config %d (%d) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n",
	function, bit_width, pci_id->segment, pci_id->bus,
	pci_id->device, pci_id->function, pci_register));

	switch (function) {
	case ACPI_READ:

	*value = 0;
	status = acpi_os_read_pci_configuration(pci_id, pci_register,
	value, bit_width);
	break;

	case ACPI_WRITE:

	status = acpi_os_write_pci_configuration(pci_id, pci_register,
	*value, bit_width);
	break;

	default:

	status = AE_BAD_PARAMETER;
	break;
	}

	return_ACPI_STATUS(status);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_ex_cmos_space_handler
	*
	* PARAMETERS: Function - Read or Write operation
	* Address - Where in the space to read or write
	* bit_width - Field width in bits (8, 16, or 32)
	* Value - Pointer to in or out value
	* handler_context - Pointer to Handler's context
	* region_context - Pointer to context specific to the
	* accessed region
	*
	* RETURN: Status
	*
	* DESCRIPTION: Handler for the CMOS address space (Op Region)
	*
	******************************************************************************/

	acpi_status
	acpi_ex_cmos_space_handler(u32 function,
	acpi_physical_address address,
	u32 bit_width,
	acpi_integer * value,
	void handler_context, void region_context)
	{
	acpi_status status = AE_OK;

	ACPI_FUNCTION_TRACE(ex_cmos_space_handler);

	return_ACPI_STATUS(status);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_ex_pci_bar_space_handler
	*
	* PARAMETERS: Function - Read or Write operation
	* Address - Where in the space to read or write
	* bit_width - Field width in bits (8, 16, or 32)
	* Value - Pointer to in or out value
	* handler_context - Pointer to Handler's context
	* region_context - Pointer to context specific to the
	* accessed region
	*
	* RETURN: Status
	*
	* DESCRIPTION: Handler for the PCI bar_target address space (Op Region)
	*
	******************************************************************************/

	acpi_status
	acpi_ex_pci_bar_space_handler(u32 function,
	acpi_physical_address address,
	u32 bit_width,
	acpi_integer * value,
	void handler_context, void region_context)
	{
	acpi_status status = AE_OK;

	ACPI_FUNCTION_TRACE(ex_pci_bar_space_handler);

	return_ACPI_STATUS(status);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_ex_data_table_space_handler
	*
	* PARAMETERS: Function - Read or Write operation
	* Address - Where in the space to read or write
	* bit_width - Field width in bits (8, 16, or 32)
	* Value - Pointer to in or out value
	* handler_context - Pointer to Handler's context
	* region_context - Pointer to context specific to the
	* accessed region
	*
	* RETURN: Status
	*
	* DESCRIPTION: Handler for the Data Table address space (Op Region)
	*
	******************************************************************************/

	acpi_status
	acpi_ex_data_table_space_handler(u32 function,
	acpi_physical_address address,
	u32 bit_width,
	acpi_integer * value,
	void handler_context, void region_context)
	{
	ACPI_FUNCTION_TRACE(ex_data_table_space_handler);

	/* Perform the memory read or write */

	switch (function) {
	case ACPI_READ:

	ACPI_MEMCPY(ACPI_CAST_PTR(char, value),
	ACPI_PHYSADDR_TO_PTR(address),
	ACPI_DIV_8(bit_width));
	break;

	case ACPI_WRITE:
	default:

	return_ACPI_STATUS(AE_SUPPORT);
	}

	return_ACPI_STATUS(AE_OK);
	}