| # |
| # For a description of the syntax of this configuration file, |
| # see Documentation/kbuild/kconfig-language.txt. |
| # |
| |
| menu "Firmware Drivers" |
| |
| config ARM_PSCI_FW |
| bool |
| |
| config ARM_SCPI_PROTOCOL |
| tristate "ARM System Control and Power Interface (SCPI) Message Protocol" |
| depends on MAILBOX |
| help |
| System Control and Power Interface (SCPI) Message Protocol is |
| defined for the purpose of communication between the Application |
| Cores(AP) and the System Control Processor(SCP). The MHU peripheral |
| provides a mechanism for inter-processor communication between SCP |
| and AP. |
| |
| SCP controls most of the power managament on the Application |
| Processors. It offers control and management of: the core/cluster |
| power states, various power domain DVFS including the core/cluster, |
| certain system clocks configuration, thermal sensors and many |
| others. |
| |
| This protocol library provides interface for all the client drivers |
| making use of the features offered by the SCP. |
| |
| config ARM_SCPI_POWER_DOMAIN |
| tristate "SCPI power domain driver" |
| depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF) |
| default y |
| select PM_GENERIC_DOMAINS if PM |
| help |
| This enables support for the SCPI power domains which can be |
| enabled or disabled via the SCP firmware |
| |
| config EDD |
| tristate "BIOS Enhanced Disk Drive calls determine boot disk" |
| depends on X86 |
| help |
| Say Y or M here if you want to enable BIOS Enhanced Disk Drive |
| Services real mode BIOS calls to determine which disk |
| BIOS tries boot from. This information is then exported via sysfs. |
| |
| This option is experimental and is known to fail to boot on some |
| obscure configurations. Most disk controller BIOS vendors do |
| not yet implement this feature. |
| |
| config EDD_OFF |
| bool "Sets default behavior for EDD detection to off" |
| depends on EDD |
| default n |
| help |
| Say Y if you want EDD disabled by default, even though it is compiled into the |
| kernel. Say N if you want EDD enabled by default. EDD can be dynamically set |
| using the kernel parameter 'edd={on|skipmbr|off}'. |
| |
| config FIRMWARE_MEMMAP |
| bool "Add firmware-provided memory map to sysfs" if EXPERT |
| default X86 |
| help |
| Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap. |
| That memory map is used for example by kexec to set up parameter area |
| for the next kernel, but can also be used for debugging purposes. |
| |
| See also Documentation/ABI/testing/sysfs-firmware-memmap. |
| |
| config EFI_PCDP |
| bool "Console device selection via EFI PCDP or HCDP table" |
| depends on ACPI && EFI && IA64 |
| default y if IA64 |
| help |
| If your firmware supplies the PCDP table, and you want to |
| automatically use the primary console device it describes |
| as the Linux console, say Y here. |
| |
| If your firmware supplies the HCDP table, and you want to |
| use the first serial port it describes as the Linux console, |
| say Y here. If your EFI ConOut path contains only a UART |
| device, it will become the console automatically. Otherwise, |
| you must specify the "console=hcdp" kernel boot argument. |
| |
| Neither the PCDP nor the HCDP affects naming of serial devices, |
| so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending |
| on how the driver discovers devices. |
| |
| You must also enable the appropriate drivers (serial, VGA, etc.) |
| |
| See DIG64_HCDPv20_042804.pdf available from |
| <http://www.dig64.org/specifications/> |
| |
| config DELL_RBU |
| tristate "BIOS update support for DELL systems via sysfs" |
| depends on X86 |
| select FW_LOADER |
| select FW_LOADER_USER_HELPER |
| help |
| Say m if you want to have the option of updating the BIOS for your |
| DELL system. Note you need a Dell OpenManage or Dell Update package (DUP) |
| supporting application to communicate with the BIOS regarding the new |
| image for the image update to take effect. |
| See <file:Documentation/dell_rbu.txt> for more details on the driver. |
| |
| config DCDBAS |
| tristate "Dell Systems Management Base Driver" |
| depends on X86 |
| help |
| The Dell Systems Management Base Driver provides a sysfs interface |
| for systems management software to perform System Management |
| Interrupts (SMIs) and Host Control Actions (system power cycle or |
| power off after OS shutdown) on certain Dell systems. |
| |
| See <file:Documentation/dcdbas.txt> for more details on the driver |
| and the Dell systems on which Dell systems management software makes |
| use of this driver. |
| |
| Say Y or M here to enable the driver for use by Dell systems |
| management software such as Dell OpenManage. |
| |
| config DMIID |
| bool "Export DMI identification via sysfs to userspace" |
| depends on DMI |
| default y |
| help |
| Say Y here if you want to query SMBIOS/DMI system identification |
| information from userspace through /sys/class/dmi/id/ or if you want |
| DMI-based module auto-loading. |
| |
| config DMI_SYSFS |
| tristate "DMI table support in sysfs" |
| depends on SYSFS && DMI |
| default n |
| help |
| Say Y or M here to enable the exporting of the raw DMI table |
| data via sysfs. This is useful for consuming the data without |
| requiring any access to /dev/mem at all. Tables are found |
| under /sys/firmware/dmi when this option is enabled and |
| loaded. |
| |
| config DMI_SCAN_MACHINE_NON_EFI_FALLBACK |
| bool |
| |
| config ISCSI_IBFT_FIND |
| bool "iSCSI Boot Firmware Table Attributes" |
| depends on X86 && ACPI |
| default n |
| help |
| This option enables the kernel to find the region of memory |
| in which the ISCSI Boot Firmware Table (iBFT) resides. This |
| is necessary for iSCSI Boot Firmware Table Attributes module to work |
| properly. |
| |
| config ISCSI_IBFT |
| tristate "iSCSI Boot Firmware Table Attributes module" |
| select ISCSI_BOOT_SYSFS |
| depends on ISCSI_IBFT_FIND && SCSI && SCSI_LOWLEVEL |
| default n |
| help |
| This option enables support for detection and exposing of iSCSI |
| Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to |
| detect iSCSI boot parameters dynamically during system boot, say Y. |
| Otherwise, say N. |
| |
| config RASPBERRYPI_FIRMWARE |
| tristate "Raspberry Pi Firmware Driver" |
| depends on BCM2835_MBOX |
| help |
| This option enables support for communicating with the firmware on the |
| Raspberry Pi. |
| |
| config FW_CFG_SYSFS |
| tristate "QEMU fw_cfg device support in sysfs" |
| depends on SYSFS && (ARM || ARM64 || PPC_PMAC || SPARC || X86) |
| depends on HAS_IOPORT_MAP |
| default n |
| help |
| Say Y or M here to enable the exporting of the QEMU firmware |
| configuration (fw_cfg) file entries via sysfs. Entries are |
| found under /sys/firmware/fw_cfg when this option is enabled |
| and loaded. |
| |
| config FW_CFG_SYSFS_CMDLINE |
| bool "QEMU fw_cfg device parameter parsing" |
| depends on FW_CFG_SYSFS |
| help |
| Allow the qemu_fw_cfg device to be initialized via the kernel |
| command line or using a module parameter. |
| WARNING: Using incorrect parameters (base address in particular) |
| may crash your system. |
| |
| config QCOM_SCM |
| bool |
| depends on ARM || ARM64 |
| select RESET_CONTROLLER |
| |
| config QCOM_SCM_32 |
| def_bool y |
| depends on QCOM_SCM && ARM |
| |
| config QCOM_SCM_64 |
| def_bool y |
| depends on QCOM_SCM && ARM64 |
| |
| config HAVE_ARM_SMCCC |
| bool |
| |
| source "drivers/firmware/broadcom/Kconfig" |
| source "drivers/firmware/google/Kconfig" |
| source "drivers/firmware/efi/Kconfig" |
| source "drivers/firmware/meson/Kconfig" |
| source "drivers/firmware/qcom/Kconfig" |
| |
| endmenu |