[ARM] S3C6400: serial support for S3C6400 and S3C6410 SoCs
Add support to the Samsung serial driver for the S3C6400
and S3C6410 serial ports.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
new file mode 100644
index 0000000..06936d1
--- /dev/null
+++ b/drivers/serial/s3c6400.c
@@ -0,0 +1,151 @@
+/* linux/drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+
+#include "samsung.h"
+
+static int s3c6400_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ if (strcmp(clk->name, "uclk0") == 0) {
+ ucon &= ~S3C6400_UCON_CLKMASK;
+ ucon |= S3C6400_UCON_UCLK0;
+ } else if (strcmp(clk->name, "uclk1") == 0)
+ ucon |= S3C6400_UCON_UCLK1;
+ else if (strcmp(clk->name, "pclk") == 0) {
+ /* See notes about transitioning from UCLK to PCLK */
+ ucon &= ~S3C6400_UCON_UCLK0;
+ } else {
+ printk(KERN_ERR "unknown clock source %s\n", clk->name);
+ return -EINVAL;
+ }
+
+ wr_regl(port, S3C2410_UCON, ucon);
+ return 0;
+}
+
+
+static int s3c6400_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ u32 ucon = rd_regl(port, S3C2410_UCON);
+
+ clk->divisor = 1;
+
+ switch (ucon & S3C6400_UCON_CLKMASK) {
+ case S3C6400_UCON_UCLK0:
+ clk->name = "uclk0";
+ break;
+
+ case S3C6400_UCON_UCLK1:
+ clk->name = "uclk1";
+ break;
+
+ case S3C6400_UCON_PCLK:
+ case S3C6400_UCON_PCLK2:
+ clk->name = "pclk";
+ break;
+ }
+
+ return 0;
+}
+
+static int s3c6400_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
+ port, port->mapbase, cfg);
+
+ /* ensure we don't change the clock settings... */
+
+ ucon &= S3C6400_UCON_CLKMASK;
+
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+static struct s3c24xx_uart_info s3c6400_uart_inf = {
+ .name = "Samsung S3C6400 UART",
+ .type = PORT_S3C6400,
+ .fifosize = 64,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .get_clksrc = s3c6400_serial_getsource,
+ .set_clksrc = s3c6400_serial_setsource,
+ .reset_port = s3c6400_serial_resetport,
+};
+
+/* device management */
+
+static int s3c6400_serial_probe(struct platform_device *dev)
+{
+ dbg("s3c6400_serial_probe: dev=%p\n", dev);
+ return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
+}
+
+static struct platform_driver s3c6400_serial_drv = {
+ .probe = s3c6400_serial_probe,
+ .remove = s3c24xx_serial_remove,
+ .driver = {
+ .name = "s3c6400-uart",
+ .owner = THIS_MODULE,
+ },
+};
+
+s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+
+static int __init s3c6400_serial_init(void)
+{
+ return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+}
+
+static void __exit s3c6400_serial_exit(void)
+{
+ platform_driver_unregister(&s3c6400_serial_drv);
+}
+
+module_init(s3c6400_serial_init);
+module_exit(s3c6400_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c6400-uart");