diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
index 2ec1ea5..7e0c4e3 100644
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -20,6 +20,8 @@
 #include <asm/machvec.h>
 #include <asm/heartbeat.h>
 #include <asm/sizes.h>
+#include <asm/clock.h>
+#include <asm/clkdev.h>
 #include <asm/reboot.h>
 #include <asm/smp-ops.h>
 
@@ -140,6 +142,45 @@
 	return fpga_read_reg(MODSWR);
 }
 
+/*
+ * FPGA-driven PCIe clocks
+ *
+ * Historically these include the oscillator, clock B (slots 2/3/4) and
+ * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove
+ * everything under a single PCIe clocks enable bit that happens to map
+ * to the same bit position as the oscillator bit for earlier FPGA
+ * versions.
+ *
+ * Given that the legacy clocks have the side-effect of shutting the CPU
+ * off through the FPGA along with the PCI slots, we simply leave them in
+ * their initial state and don't bother registering them with the clock
+ * framework.
+ */
+static int sdk7786_pcie_clk_enable(struct clk *clk)
+{
+	fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR);
+	return 0;
+}
+
+static void sdk7786_pcie_clk_disable(struct clk *clk)
+{
+	fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
+}
+
+static struct clk_ops sdk7786_pcie_clk_ops = {
+	.enable		= sdk7786_pcie_clk_enable,
+	.disable	= sdk7786_pcie_clk_disable,
+};
+
+static struct clk sdk7786_pcie_clk = {
+	.ops		= &sdk7786_pcie_clk_ops,
+};
+
+static struct clk_lookup sdk7786_pcie_cl = {
+	.con_id		= "pcie_plat_clk",
+	.clk		= &sdk7786_pcie_clk,
+};
+
 static int sdk7786_clk_init(void)
 {
 	struct clk *clk;
@@ -158,7 +199,18 @@
 	ret = clk_set_rate(clk, 33333333);
 	clk_put(clk);
 
-	return ret;
+	/*
+	 * Setup the FPGA clocks.
+	 */
+	ret = clk_register(&sdk7786_pcie_clk);
+	if (unlikely(ret)) {
+		pr_err("FPGA clock registration failed\n");
+		return ret;
+	}
+
+	clkdev_add(&sdk7786_pcie_cl);
+
+	return 0;
 }
 
 static void sdk7786_restart(char *cmd)
diff --git a/arch/sh/drivers/pci/fixups-sdk7786.c b/arch/sh/drivers/pci/fixups-sdk7786.c
index 058a65a..0e18ee3 100644
--- a/arch/sh/drivers/pci/fixups-sdk7786.c
+++ b/arch/sh/drivers/pci/fixups-sdk7786.c
@@ -10,7 +10,6 @@
 #define pr_fmt(fmt) "PCI: " fmt
 
 #include <linux/init.h>
-#include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <mach/fpga.h>
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
index 8ec4af1..ae0b2c9 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -17,7 +17,6 @@
 #include <linux/sh_clk.h>
 #include "pcie-sh7786.h"
 #include <asm/sizes.h>
-#include <asm/clock.h>
 
 struct sh7786_pcie_port {
 	struct pci_channel	*hose;
@@ -510,6 +509,7 @@
 
 static int __init sh7786_pcie_init(void)
 {
+	struct clk *platclk;
 	int ret = 0, i;
 
 	printk(KERN_NOTICE "PCI: Starting initialization.\n");
@@ -527,6 +527,22 @@
 	if (unlikely(!sh7786_pcie_ports))
 		return -ENOMEM;
 
+	/*
+	 * Fetch any optional platform clock associated with this block.
+	 *
+	 * This is a rather nasty hack for boards with spec-mocking FPGAs
+	 * that have a secondary set of clocks outside of the on-chip
+	 * ones that need to be accounted for before there is any chance
+	 * of touching the existing MSTP bits or CPG clocks.
+	 */
+	platclk = clk_get(NULL, "pcie_plat_clk");
+	if (IS_ERR(platclk)) {
+		/* Sane hardware should probably get a WARN_ON.. */
+		platclk = NULL;
+	}
+
+	clk_enable(platclk);
+
 	printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
 
 	for (i = 0; i < nr_ports; i++) {
@@ -539,8 +555,11 @@
 		ret |= sh7786_pcie_hwops->port_init_hw(port);
 	}
 
-	if (unlikely(ret))
+	if (unlikely(ret)) {
+		clk_disable(platclk);
+		clk_put(platclk);
 		return ret;
+	}
 
 	return 0;
 }
diff --git a/arch/sh/include/mach-sdk7786/mach/fpga.h b/arch/sh/include/mach-sdk7786/mach/fpga.h
index 8cc7841..b7d9369 100644
--- a/arch/sh/include/mach-sdk7786/mach/fpga.h
+++ b/arch/sh/include/mach-sdk7786/mach/fpga.h
@@ -39,7 +39,7 @@
 #define  PCIECR_PRST3		BIT(11) /* slot 3 card present */
 #define  PCIECR_PRST2		BIT(10) /* slot 2 card present */
 #define  PCIECR_PRST1		BIT(9)  /* slot 1 card present */
-#define  PCIECR_CLKEN		BIT(4)
+#define  PCIECR_CLKEN		BIT(4)	/* oscillator enable */
 
 #define FAER		0x150
 #define USRGPIR		0x160