ASoC: Add device tree binding for WM8776
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/Documentation/devicetree/bindings/sound/wm8776.txt b/Documentation/devicetree/bindings/sound/wm8776.txt
new file mode 100644
index 0000000..3b9ca49
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8776.txt
@@ -0,0 +1,18 @@
+WM8776 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8776"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8776@1a {
+ compatible = "wlf,wm8776";
+ reg = <0x1a>;
+};
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 367a990..0cfbfc1 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
@@ -452,6 +453,12 @@
.reg_cache_default = wm8776_reg,
};
+static const struct of_device_id wm8776_of_match[] = {
+ { .compatible = "wlf,wm8776", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8776_of_match);
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8776_spi_probe(struct spi_device *spi)
{
@@ -483,6 +490,7 @@
.driver = {
.name = "wm8776",
.owner = THIS_MODULE,
+ .of_match_table = wm8776_of_match,
},
.probe = wm8776_spi_probe,
.remove = __devexit_p(wm8776_spi_remove),
@@ -527,6 +535,7 @@
.driver = {
.name = "wm8776",
.owner = THIS_MODULE,
+ .of_match_table = wm8776_of_match,
},
.probe = wm8776_i2c_probe,
.remove = __devexit_p(wm8776_i2c_remove),