[PATCH] S2io: Support for bimodal interrupts
Hi,
This is a patch to provide bimodal interrupt moderation support for
Xframe II adapter. Basically, in this moderation scheme, the adapter
raises a traffic interrupt if the no. of packets transmitted and/or
received reaches a programmable threshold.
Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 15e2ee9..f430ffe 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -297,6 +297,7 @@
static unsigned int shared_splits;
static unsigned int tmac_util_period = 5;
static unsigned int rmac_util_period = 5;
+static unsigned int bimodal = 0;
#ifndef CONFIG_S2IO_NAPI
static unsigned int indicate_max_pkts;
#endif
@@ -1306,52 +1307,86 @@
time++;
}
+ if (nic->config.bimodal) {
+ int k = 0;
+ for (k = 0; k < config->rx_ring_num; k++) {
+ val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
+ val64 |= TTI_CMD_MEM_OFFSET(0x38+k);
+ writeq(val64, &bar0->tti_command_mem);
- /* RTI Initialization */
- if (nic->device_type == XFRAME_II_DEVICE) {
/*
- * Programmed to generate Apprx 500 Intrs per
- * second
- */
- int count = (nic->config.bus_speed * 125)/4;
- val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
+ * Once the operation completes, the Strobe bit of the command
+ * register will be reset. We poll for this particular condition
+ * We wait for a maximum of 500ms for the operation to complete,
+ * if it's not complete by then we return error.
+ */
+ time = 0;
+ while (TRUE) {
+ val64 = readq(&bar0->tti_command_mem);
+ if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
+ break;
+ }
+ if (time > 10) {
+ DBG_PRINT(ERR_DBG,
+ "%s: TTI init Failed\n",
+ dev->name);
+ return -1;
+ }
+ time++;
+ msleep(50);
+ }
+ }
} else {
- val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
- }
- val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
- RTI_DATA1_MEM_RX_URNG_B(0x10) |
- RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
- writeq(val64, &bar0->rti_data1_mem);
-
- val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
- RTI_DATA2_MEM_RX_UFC_B(0x2) |
- RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
- writeq(val64, &bar0->rti_data2_mem);
-
- val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD;
- writeq(val64, &bar0->rti_command_mem);
-
- /*
- * Once the operation completes, the Strobe bit of the
- * command register will be reset. We poll for this
- * particular condition. We wait for a maximum of 500ms
- * for the operation to complete, if it's not complete
- * by then we return error.
- */
- time = 0;
- while (TRUE) {
- val64 = readq(&bar0->rti_command_mem);
- if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
- break;
+ /* RTI Initialization */
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ /*
+ * Programmed to generate Apprx 500 Intrs per
+ * second
+ */
+ int count = (nic->config.bus_speed * 125)/4;
+ val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
+ } else {
+ val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
}
- if (time > 10) {
- DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
- dev->name);
- return -1;
+ val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
+ RTI_DATA1_MEM_RX_URNG_B(0x10) |
+ RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
+
+ writeq(val64, &bar0->rti_data1_mem);
+
+ val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
+ RTI_DATA2_MEM_RX_UFC_B(0x2) |
+ RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
+ writeq(val64, &bar0->rti_data2_mem);
+
+ for (i = 0; i < config->rx_ring_num; i++) {
+ val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
+ | RTI_CMD_MEM_OFFSET(i);
+ writeq(val64, &bar0->rti_command_mem);
+
+ /*
+ * Once the operation completes, the Strobe bit of the
+ * command register will be reset. We poll for this
+ * particular condition. We wait for a maximum of 500ms
+ * for the operation to complete, if it's not complete
+ * by then we return error.
+ */
+ time = 0;
+ while (TRUE) {
+ val64 = readq(&bar0->rti_command_mem);
+ if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
+ break;
+ }
+ if (time > 10) {
+ DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
+ dev->name);
+ return -1;
+ }
+ time++;
+ msleep(50);
+ }
}
- time++;
- msleep(50);
}
/*
@@ -1789,6 +1824,8 @@
&bar0->prc_rxd0_n[i]);
val64 = readq(&bar0->prc_ctrl_n[i]);
+ if (nic->config.bimodal)
+ val64 |= PRC_CTRL_BIMODAL_INTERRUPT;
#ifndef CONFIG_2BUFF_MODE
val64 |= PRC_CTRL_RC_ENABLED;
#else
@@ -5030,6 +5067,7 @@
module_param(shared_splits, int, 0);
module_param(tmac_util_period, int, 0);
module_param(rmac_util_period, int, 0);
+module_param(bimodal, bool, 0);
#ifndef CONFIG_S2IO_NAPI
module_param(indicate_max_pkts, int, 0);
#endif
@@ -5397,6 +5435,14 @@
else
strcat(sp->name, ": Neterion Xframe I 10GbE adapter");
+ /* Initialize bimodal Interrupts */
+ sp->config.bimodal = bimodal;
+ if (!(sp->device_type & XFRAME_II_DEVICE) && bimodal) {
+ sp->config.bimodal = 0;
+ DBG_PRINT(ERR_DBG,"%s:Bimodal intr not supported by Xframe I\n",
+ dev->name);
+ }
+
/*
* Make Link state as off at this point, when the Link change
* interrupt comes the state will be automatically changed to